My Motorola MOTO G6 plus is dead
The model is the XT1926-3 and suddenly the screen "freezed" while I was using it. I restarted the phone by holding down the power button and from that moment it does not turn on anymore. Completely black screen. With the "power + volume -" keys I can't enter recovery.
So I tried to unbrick with the blankflash loading, but it always gives me this error:
[ 0.000] Opening device: \\.\COM4
[ 0.014] Detecting device
[ 0.016] ...cpu.id = 172 (0xac)
[ 0.016] ...cpu.sn = 2974230727 (0xb14728c7)
[ 0.016] Opening singleimage
[ 0.020] Loading package
[ 0.021] ...filename = pkg.xml
[ 0.022] Loading programmer
[ 0.022] ...filename = programmer.elf
[ 0.022] Sending programmer
[ 0.209] Handling things over to programmer
[ 0.209] Identifying CPU version
[ 0.209] Waiting for firehose to get ready
[ 3.221] ...SDM630 1.0
[ 3.221] Determining target secure state
[ 3.223] ...secure = yes
[ 3.238] Configuring device...
[ 3.242] Flashing GPT...
[ 3.242] Flashing partition with gpt.bin
[ 3.244] Initializing storage
[ 8.440] Target NAK!
[ 8.441] ...ERROR: Failed to open the SDCC Device slot 0 partition 0
[ 8.441] ...ERROR: Failed to open the device 1 slot 0 partition 0
[ 8.441] ...INFO: Device type 1, slot 0, partition 0, error 0
[ 8.441] ...WARN: Get Info failed to open 1 slot 0, partition 0, error 0
[ 8.441] ...ERROR: Failed to get device info slot:0artition:0
[ 8.441] ...GetStorageInfo Failed - storage_device_get_info() returned FALSE
[ 8.441] ...ERROR 14: Line 1281: HANDLE_STORAGE_INFO_FAILURE
[ 8.442] ERROR: do_package()->do_recipe()->do_flash()->flash_simg()->do_package()->do_recipe()->do_flash()->gpt_flash()->get_storage()->init_storage()->firehose_do_fmt()->do_recipe()->NAK
[ 8.442] Check qboot_log.txt for more details
[ 8.443] Total time: 8.444s
[ 8.443]
[ 8.443] qboot version 3.86
[ 8.443]
[ 8.443] DEVICE {
[ 8.443] name = "\\.\COM4",
[ 8.443] flags = "0x144",
[ 8.443] addr = "0x62FD54",
[ 8.443] sahara.current_mode = "0",
[ 8.443] api.buffer = "0xFB8020",
[ 8.443] cpu.serial = "2974230727",
[ 8.443] cpu.id = "172",
[ 8.443] cpu.sv_sbl = "1",
[ 8.443] cpu.name = "SDM630",
[ 8.443] storage.type = "eMMC",
[ 8.443] sahara.programmer = "programmer.elf",
[ 8.443] module.firehose = "0x7D1880",
[ 8.443] api.firehose = "0x7D1950",
[ 8.443] cpu.ver = "256",
[ 8.443] cpu.vername = "1.0",
[ 8.443] fh.max_packet_sz = "1048576",
[ 8.443] fh.storage_inited = "1",
[ 8.443] provisioning_may_hang = "true",
[ 8.444] }
[ 8.444]
Click to expand...
Click to collapse
I tried with 3 different blackflashes on 2 different PCs, also changing the USB port, but nothing: |
Do you have a working blankflash? Some advice?
Should I use it as a paperweight?
Try to hold the power button for 1-2 minutes.
ChIP_83 said:
My Motorola MOTO G6 plus is dead
The model is the XT1926-3 and suddenly the screen "freezed" while I was using it. I restarted the phone by holding down the power button and from that moment it does not turn on anymore. Completely black screen. With the "power + volume -" keys I can't enter recovery.
So I tried to unbrick with the blankflash loading, but it always gives me this error:
I tried with 3 different blackflashes on 2 different PCs, also changing the USB port, but nothing: |
Do you have a working blankflash? Some advice?
Should I use it as a paperweight?
Click to expand...
Click to collapse
What shows up in your device manager?
And send us the qboot_log.txt
Did you do any overclocking or modding in your phone before this happened?
ChIP_83 said:
My Motorola MOTO G6 plus is dead
The model is the XT1926-3 and suddenly the screen "freezed" while I was using it. I restarted the phone by holding down the power button and from that moment it does not turn on anymore. Completely black screen. With the "power + volume -" keys I can't enter recovery.
So I tried to unbrick with the blankflash loading, but it always gives me this error:
I tried with 3 different blackflashes on 2 different PCs, also changing the USB port, but nothing: |
Do you have a working blankflash? Some advice?
Should I use it as a paperweight?
Click to expand...
Click to collapse
Okay, what does the device manager show the device as, it could be bricked as qualcomm 9008,
The qboot log file could be nice as well,
Related
I tried to update my phone to Android N, but once the update installed, it went onto a black screen and will not turn on now.
When connected to the computer it says - qualcomm hs-usb qdloader 9008
I cant get anything loaded through pressing the volume down and power key.
I have tried to follow the link below but can't get blank-flash to work, I only get to this
[ -0.000] Opening device: \\.\COM5
[ -0.000] Detecting device
[ 4.072] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 4.072] Check qboot_log.txt for more details
[ 4.072] Total time: 4.072s
[ 4.072]
[ 4.072] qboot version 3.40
[ 4.072]
[ 4.072] DEVICE {
[ 4.072] name = "\\.\COM5",
[ 4.072] flags = "0x64",
[ 4.072] addr = "0x28FE6C",
[ 4.072] api.bnr = "0x5F2DE8",
[ 4.072] }
[ 4.072]
[ 4.072]
[ 4.072] Backup & Restore {
[ 4.072] num_entries = 0,
[ 4.072] restoring = "false",
[ 4.072] backup_error = "not started",
[ 4.072] restore_error = "not started",
[ 4.072] }
[ 4.072]
**** Log buffer [000001] 2017-04-06_00:08:07 ****
[ -0.000] Opening device: \\.\COM5
[ -0.000] Detecting device
[ 4.072] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 4.072] Check qboot_log.txt for more details
[ 4.072] Total time: 4.072s
[ 4.072]
[ 4.072] qboot version 3.40
[ 4.072]
[ 4.072] DEVICE {
[ 4.072] name = "\\.\COM5",
[ 4.072] flags = "0x64",
[ 4.072] addr = "0x28FE6C",
[ 4.072] api.bnr = "0x5A2DE8",
[ 4.072] }
[ 4.072]
[ 4.072]
[ 4.072] Backup & Restore {
[ 4.072] num_entries = 0,
[ 4.072] restoring = "false",
[ 4.072] backup_error = "not started",
[ 4.072] restore_error = "not started",
[ 4.072] }
[ 4.072]
**** Log buffer [000001] 2017-08-23_07:24:45 ****
[ 0.000] Opening device: \\.\COM3
[ 0.000] Detecting device
[ 0.000] ...cpu.id = 2418 (0x972)
[ 0.000] ...cpu.sn = 13126848 (0xc84cc0)
[ 0.000] Opening singleimage
[ 0.219] Loading package
[ 0.234] ...filename = singleimage.pkg.xml
[ 0.234] Loading programmer
[ 0.234] ...filename = programmer.mbn
[ 0.234] Sending programmer
[ 0.469] Handling things over to programmer
[ 0.469] Identifying CPU version
[ 0.469] Waiting for firehose to get ready
[ 60.980] Waiting for firehose to get ready
[121.447] ...MSM8952 unknown
[121.447] Determining target secure state
[121.463] Waiting for firehose to get ready
[181.889] ...secure = no
[181.904] Flashing GPT...
[181.920] Flashing partition:0 with gpt_main0.bin
[181.920] Initializing storage
[181.936] Waiting for firehose to get ready
[242.406] Configuring device...
[242.406] Waiting for firehose to get ready
[302.883] Waiting for firehose to get ready
[363.337] Waiting for firehose to get ready
[423.753] Waiting for firehose to get ready
[484.166] ERROR: do_package()->do_recipe()->do_flash()->gpt_flash()->get_storage()->init_storage()->firehose_do_fmt()->do_recipe()->do_configure()->buffer_read()->device_read()->IO error
[484.166] Check qboot_log.txt for more details
[484.166] Total time: 484.166s
[484.197]
[484.197] qboot version 3.40
[484.197]
[484.197] DEVICE {
[484.197] name = "\\.\COM3",
[484.197] flags = "0x64",
[484.197] addr = "0x61FE5C",
[484.197] sahara.current_mode = "0",
[484.197] api.buffer = "0x1388020",
[484.197] cpu.serial = "13126848",
[484.197] cpu.id = "2418",
[484.197] cpu.sv_sbl = "0",
[484.197] cpu.name = "MSM8952",
[484.197] storage.type = "eMMC",
[484.197] sahara.programmer = "programmer.mbn",
[484.197] module.firehose = "0x7389B8",
[484.197] cpu.ver = "0",
[484.197] cpu.vername = "unknown",
[484.197] api.bnr = "0x834860",
[484.197] }
[484.197]
[484.197]
[484.197] Backup & Restore {
[484.197] num_entries = 0,
[484.197] restoring = "false",
[484.197] backup_error = "not started",
[484.197] restore_error = "not started",
[484.197] }
[484.197]
Click to expand...
Click to collapse
https://forum.xda-developers.com/moto-g4-plus/help/solved-unbrick-hard-bricked-dead-t3585016
Please help
Thank you
Hello.
I believe you'll need the updated blankflash.
Follow this guide - https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-hardbrick-solved-guide-t3657761
I would try holding power key and vol down (without it being connected to PC, make sure it has enough battery) for as long as needed to reboot in to normal bootloader. This can be up to 5-10 mins
Hard Bricked Moto G4 Plus
Kindly send your mail ID and I will forward you all the files
Moderator Edit: "Kindly" don't ask anyone to do this.
Members are advised to avoid this kind of garbage.
why are you giving your Email ID for no whatever reason. Blankflash files are available on the Thread
@ncfcdaniel if you dont know which thread it is, then here is the link : https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-hardbrick-solved-guide-t3657761
Hi, I post the updates of the contact with ARYKTECH https://web.telegram.org/#/[email protected]
I buy in http://www.aryk.tech/2017/11/moto-x-play-unbrick-solutions.html the blankflash file for bricked MXP when downgrade of Nougat Stable to MM and install the OTA of 2017/01.
2017/11/02:
I pay 10 USD with paypal and wait...
2017/11/03
I receive the files hours later in google drive:
https://forum.xda-developers.com/attachment.php?attachmentid=4323100&stc=1&d=1509823657
Information of the folders:
https://dl.xda-developers.com/4/3/2....png?key=lb74mdfB79Bje9bOnMbqjA&ts=1509823783
https://dl.xda-developers.com/4/3/2....png?key=gKWllZVzD1gzMKR5DoHOoA&ts=1509823783
The version send me is the same like the soaktest:
lux_retasia_ds_userdebug_7.1.1_NPD26.35_eng.praseed.170526.190746_intcfg_test-keys_retasiaall_03
When I execute the blank-flash.bat of the folders have a error.
C:\mxp blankflash\blankflash>.\qboot.exe blank-flash
opening device: \\.\COM4
OKAY [ 0.003s]
greeting device for command mode
OKAY [ 0.001s]
identifying device
...serial = 0x15C3716
...chip-id = 0x90B (MSM8939)
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ 0.004s]
finding files
...programmer = programmer.mbn
...singleimage = singleimage.bin
OKAY [ 0.004s]
switching to download mode
OKAY [ 0.001s]
greeting device for image downloading
OKAY [ 0.001s]
sending programmer
FAILED (blank-flash:sahara-transfer-image:send-image:error reading packet)
C:\mxp blankflash\blankflash>pause
Presione una tecla para continuar . . .
----
C:\mxp blankflash\Err_blankflash>.\qboot.exe blank-flash
opening device: \\.\COM4
OKAY [ 0.002s]
greeting device for command mode
OKAY [ 0.002s]
identifying device
...serial = 0x15C3716
...chip-id = 0x90B (MSM8939)
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ 0.004s]
finding files
...programmer = programmer.mbn
...singleimage = singleimage.bin
OKAY [ 0.003s]
switching to download mode
OKAY [ 0.000s]
greeting device for image downloading
OKAY [ 0.001s]
sending programmer
OKAY [ 0.047s]
flashing singleimage
...protocol = sdl
FAILED (blank-flash:sdl-transfer-image:sdl-hello:invalid HDLC frame)
C:\mxp blankflash\Err_blankflash>pause
2017/11/04:
Right now i wait a new version.... who promised me to send.
As I guessed they began with bull****, assuming naive you have old security there )
I think they got nothing. Motorola leak strikes like a miracle, but not SO often.
Let us know if any of their methods work!
2017/11/05 send the version 3 of blankflash:
ERROR
**** Log buffer [000001] 2017-11-05_14:40:23 ****
[ -0.000] Opening device: \\.\COM8
[ -0.000] Detecting device
[ -0.000] ...cpu.id = 2315 (0x90b)
[ -0.000] ...cpu.sn = 60355909 (0x398f545)
[ -0.000] Opening singleimage
[ -0.000] ERROR: error opening singleimage
[ -0.000] Check qboot_log.txt for more details
[ -0.000] Total time: 0.016s
[ -0.000]
[ -0.000] qboot version 3.40
[ -0.000]
[ -0.000] DEVICE {
[ -0.000] name = "\\.\COM8",
[ -0.000] flags = "0x64",
[ -0.000] addr = "0x22FE6C",
[ -0.000] sahara.current_mode = "3",
[ -0.000] api.buffer = "0x1A00020",
[ -0.000] cpu.serial = "60355909",
[ -0.000] cpu.id = "2315",
[ -0.000] cpu.sv_sbl = "0",
[ -0.000] api.bnr = "0x612FE8",
[ -0.000] }
[ -0.000]
[ -0.000]
[ -0.000] Backup & Restore {
[ -0.000] num_entries = 0,
[ -0.000] restoring = "false",
[ -0.000] backup_error = "not started",
[ -0.000] restore_error = "not started",
[ -0.000] }
[ -0.000]
Blankflash files I asks for version 3 instead of 4
soyguris said:
2017/11/05 send the version 3 of blankflash:
ERROR
**** Log buffer [000001] 2017-11-05_14:40:23 ****
[ -0.000] Opening device: \\.\COM8
[ -0.000] Detecting device
[ -0.000] ...cpu.id = 2315 (0x90b)
[ -0.000] ...cpu.sn = 60355909 (0x398f545)
[ -0.000] Opening singleimage
[ -0.000] ERROR: error opening singleimage
[ -0.000] Check qboot_log.txt for more details
[ -0.000] Total time: 0.016s
[ -0.000]
[ -0.000] qboot version 3.40
[ -0.000]
[ -0.000] DEVICE {
[ -0.000] name = "\\.\COM8",
[ -0.000] flags = "0x64",
[ -0.000] addr = "0x22FE6C",
[ -0.000] sahara.current_mode = "3",
[ -0.000] api.buffer = "0x1A00020",
[ -0.000] cpu.serial = "60355909",
[ -0.000] cpu.id = "2315",
[ -0.000] cpu.sv_sbl = "0",
[ -0.000] api.bnr = "0x612FE8",
[ -0.000] }
[ -0.000]
[ -0.000]
[ -0.000] Backup & Restore {
[ -0.000] num_entries = 0,
[ -0.000] restoring = "false",
[ -0.000] backup_error = "not started",
[ -0.000] restore_error = "not started",
[ -0.000] }
[ -0.000]
Click to expand...
Click to collapse
I tried to flash blank flash files from Moto G4 Plus forum and it says, expected version 3 instead of 4 and it quit. I believe you have version 3 blank flash files. Waiting for you to successfully unbrick your Moto X Play, so that I can also get the same files and try to unbrik my MXP, fingers crossed!
2017/11/07: I escalated the case to Paypal and gave me back the money.
Only Motorola have the solution.
Can I test version 3 file on my MXP?
soyguris said:
2017/11/07: I escalated the case to Paypal and gave me back the money.
Only Motorola have the solution.
Click to expand...
Click to collapse
Could you please share the version 3 Blank Flash Files and let me test it on my MXP?
Lord of Hell said:
Could you please share the version 3 Blank Flash Files and let me test it on my MXP?
Click to expand...
Click to collapse
The files attached.
None of them works
done!
it works!??
I tested on my moto x play xt1563 and gave the same errors It did not work.
Sorry for english, i'm using google translate
Not working is a scam
Enviado desde mi XT1563 mediante Tapatalk
This is another question on how to unbrick a hard-bricked G4.
What I did so far:
1) Windows runs on test mode.
2) QualcommDrv installed --> Device is shown as "Qualcomm HS-USB QDLoader 9008 (COM5)"
3) Downloaded "blankflash-MotoG4" package and ran the blank-flash.bat file --> ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
4) Pressed POWER BUTTON + VOL DOWN while running the bat file: same error
5) out of curiosity I took a blankflas package for G4+ and this took me to " Waiting for firehose to get ready"
but nothing more happened after this message.
Any advice? Thank you!
The same problem is happening with my moto g4.
The same problem is happening with my moto g4, I tried many blank flash, but did not work.
markusk11 said:
This is another question on how to unbrick a hard-bricked G4.
What I did so far:
1) Windows runs on test mode.
2) QualcommDrv installed --> Device is shown as "Qualcomm HS-USB QDLoader 9008 (COM5)"
3) Downloaded "blankflash-MotoG4" package and ran the blank-flash.bat file --> ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
4) Pressed POWER BUTTON + VOL DOWN while running the bat file: same error
5) out of curiosity I took a blankflas package for G4+ and this took me to " Waiting for firehose to get ready"
but nothing more happened after this message.
Any advice? Thank you!
Click to expand...
Click to collapse
Can you check the qboot log and see if there's any more info there that might explain what the problem is? An IO error normally indicates that your device can't be detected or there's an issue with the file system
qboot_log.txt
[ -0.000] Opening device: \\.\COM5
[ 0.010] Detecting device
[ 0.012] ...cpu.id = 2418 (0x972)
[ 0.012] ...cpu.sn = 39153073 (0x2556db1)
[ 0.012] Opening singleimage
[ 0.012] Loading package
[ 0.016] ...filename = singleimage.pkg.xml
[ 0.018] Loading programmer
[ 0.019] ...filename = programmer.mbn
[ 0.019] Sending programmer
[ 0.236] Handling things over to programmer
[ 0.237] Identifying CPU version
[ 0.239] Waiting for firehose to get ready
[ 9.753] ReadFile() failed, GetLastError()=0
[ 9.803] ReadFile() failed, GetLastError()=0
[ 62.253] Waiting for firehose to get ready
[122.562] ...MSM8952 unknown
[122.562] Determining target secure state
[122.564] Waiting for firehose to get ready
[182.873] ...secure = no
[182.883] Flashing GPT...
[182.884] Flashing partition:0 with gpt_main0.bin
[182.884] Initializing storage
[182.887] Waiting for firehose to get ready
[243.195] Configuring device...
[243.197] Waiting for firehose to get ready
[303.506] Waiting for firehose to get ready
[363.814] Waiting for firehose to get ready
[424.126] Waiting for firehose to get ready
[484.430] ERROR: do_package()->do_recipe()->do_flash()->gpt_flash()->get_storage()->init_storage()->firehose_do_fmt()->do_recipe()->do_configure()->buffer_read()->device_read()->IO error
[484.430] Check qboot_log.txt for more details
[484.431] Total time: 484.431s
[484.432]
[484.432] qboot version 3.40
[484.432]
[484.432] DEVICE {
[484.432] name = "\\.\COM5",
[484.432] flags = "0x64",
[484.432] addr = "0x28FE6C",
[484.432] sahara.current_mode = "0",
[484.432] api.buffer = "0x2600020",
[484.432] cpu.serial = "39153073",
[484.432] cpu.id = "2418",
[484.432] cpu.sv_sbl = "0",
[484.432] cpu.name = "MSM8952",
[484.432] storage.type = "eMMC",
[484.432] sahara.programmer = "programmer.mbn",
[484.432] module.firehose = "0x25616A0",
[484.432] cpu.ver = "0",
[484.432] cpu.vername = "unknown",
[484.432] api.bnr = "0x2567DA8",
[484.432] }
[484.432]
[484.432]
[484.432] Backup & Restore {
[484.432] num_entries = 0,
[484.432] restoring = "false",
[484.432] backup_error = "not started",
[484.432] restore_error = "not started",
[484.432] }
[484.432]
my wife plugged in her G5 plus into to plug last night and when she woke up it was turned off and doesn't respond to anything.. I tried using the volum - & power button to get it to recovery mode but it doesn't work. When I plug it in the white notification light blinks.. nothing has been tampered with (no custom flash or anything)
I browsed the forum and found some info at https://forum.xda-developers.com/moto-g4-plus/help/solved-unbrick-hard-bricked-dead-t3585016 but didn't get it to work since it was for a G4 plus:
- set pc to test mode
- installed Qualcomm drivers
- when phone is plugged into usb on PC I get a Qualcomm Device in COM3
- I tried using a blankflash batch file using Qboot 3.4 I found on other threads on the site but didn't work.. thread mentions a 3.85 for Oreo but can not find it
Code:
[ 0.000] Opening device: \\.\COM3
[ 0.003] Detecting device
[ 4.013] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 4.013] Check qboot_log.txt for more details
[ 4.014] Total time: 4.017s
[ 4.015]
[ 4.015] qboot version 3.40
[ 4.015]
[ 4.015] DEVICE {
[ 4.015] name = "\\.\COM3",
[ 4.015] flags = "0x64",
[ 4.015] addr = "0x61FE4C",
[ 4.015] api.bnr = "0x662F78",
[ 4.015] }
[ 4.015]
[ 4.015]
[ 4.015] Backup & Restore {
[ 4.015] num_entries = 0,
[ 4.015] restoring = "false",
[ 4.015] backup_error = "not started",
[ 4.015] restore_error = "not started",
[ 4.015] }
[ 4.015]
but when I keep running the batch (as stated in the thread, it can take some time to get a lock on the phone) I sometimes get something like this:
Code:
< waiting for device >
Motorola qboot utility version 3.40
[ 0.000] Opening device: \\.\COM3
[ 0.001] Detecting device
[ 0.004] ...cpu.id = 70 (0x46)
[ 0.004] ...cpu.sn = 2491206852 (0x947cccc4)
[ 0.005] Opening singleimage
[ 0.005] Loading package
[ 0.009] ...filename = singleimage.pkg.xml
[ 0.012] Loading programmer
[ 0.012] ...filename = programmer.mbn
[ 0.012] Sending programmer
[ 0.227] Handling things over to programmer
[ 0.227] Identifying CPU version
[ 0.229] Waiting for firehose to get ready
[ 11.348] ReadFile() failed, GetLastError()=0
[ 11.350] ReadFile() failed, GetLastError()=0
[ 21.133] ReadFile() failed, GetLastError()=0
[ 21.136] ReadFile() failed, GetLastError()=0
[ 60.543] Waiting for firehose to get ready
[ 63.543] WriteFile() failed, GetLastError()=0
[ 68.482] ReadFile() failed, GetLastError()=0
[120.661] ...MSM8953 unknown
[120.661] Determining target secure state
[120.664] Waiting for firehose to get ready
[180.865] ...secure = no
[180.891] Waiting for firehose to get ready
[240.957] Configuring device...
[240.960] Waiting for firehose to get ready
[301.630] Waiting for firehose to get ready
[360.485] ReadFile() failed, GetLastError()=0
[360.489] ReadFile() failed, GetLastError()=0
[364.229] Waiting for firehose to get ready
[424.262] Waiting for firehose to get ready
[484.384] ERROR: do_package()->do_recipe()->do_configure()->buffer_read()->devic
e_read()->IO error
[484.384] Check qboot_log.txt for more details
[484.384] Total time: 484.385s
FAILED: qb_flash_singleimage()->do_package()->do_recipe()->do_configure()->buffe
r_read()->device_read()->IO error
Anybody who can point me in the direction of the correct files to get it to work?
Dieterweireldt said:
my wife plugged in her G5 plus into to plug last night and when she woke up it was turned off and doesn't respond to anything.. I tried using the volum - & power button to get it to recovery mode but it doesn't work. When I plug it in the white notification light blinks.. nothing has been tampered with (no custom flash or anything)
I browsed the forum and found some info at https://forum.xda-developers.com/moto-g4-plus/help/solved-unbrick-hard-bricked-dead-t3585016 but didn't get it to work since it was for a G4 plus:
- set pc to test mode
- installed Qualcomm drivers
- when phone is plugged into usb on PC I get a Qualcomm Device in COM3
- I tried using a blankflash batch file using Qboot 3.4 I found on other threads on the site but didn't work.. thread mentions a 3.85 for Oreo but can not find it
but when I keep running the batch (as stated in the thread, it can take some time to get a lock on the phone) I sometimes get something like this:
Anybody who can point me in the direction of the correct files to get it to work?
Click to expand...
Click to collapse
There is no blankflash file for the Moto G5+ , such a file has to be leaked by some Motorola employee but that didn't happen. There is one for the Moto Z2 play but that one was for Nougat and won't work on Oreo, it was risky on 7.0 too. You can search it here on XDA or Google if you want to give it a shot nevertheless but if you can't reach fastboot mode to flash a firmware you're most likely out of luck.
Sent from my Moto G5 Plus using XDA Labs
Wolfcity said:
There is no blankflash file for the Moto G5+ , such a file has to be leaked by some Motorola employee but that didn't happen. There is one for the Moto Z2 play but that one was for Nougat and won't work on Oreo, it was risky on 7.0 too. You can search it here on XDA or Google if you want to give it a shot nevertheless but if you can't reach fastboot mode to flash a firmware you're most likely out of luck.
Sent from my Moto G5 Plus using XDA Labs
Click to expand...
Click to collapse
Ok thank you for the reply.. ordered the G8 plus for her now
Dieterweireldt said:
Ok thank you for the reply.. ordered the G8 plus for her now
Click to expand...
Click to collapse
Good choice.
Sent from my Moto G5 Plus using XDA Labs
If you has bricked your Moto g7 you must join this group https://t.me/MotoG7RiverDiscussion There you will find a new blankflash file, that's working with last motorola's february update.
Enjoy it, wash your hands and take care of yourself!
I need Help
Motorola qboot utility version 3.40
[ -0.000] Opening device: \\.\COM5
[ 0.001] Detecting device
[ 4.008] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 4.008] Check qboot_log.txt for more details
[ 4.010] Total time: 4.013s
FAILED: qb_flash_singleimage()->sahara_greet_device()->change_mode()->do_hello()->IO error
**** Log buffer [000001] 2020-04-02_12:00:32 ****
[ -0.000] Opening device: \\.\COM5
[ 0.001] Detecting device
[ 4.007] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 4.007] Check qboot_log.txt for more details
[ 4.007] Total time: 4.009s
[ 4.007]
[ 4.007] qboot version 3.40
[ 4.007]
[ 4.007] DEVICE {
[ 4.007] name = "\\.\COM5",
[ 4.007] flags = "0x64",
[ 4.007] addr = "0x61FE4C",
[ 4.007] api.bnr = "0x8B2D20",
[ 4.007] }
[ 4.007]
[ 4.007]
[ 4.007] Backup & Restore {
[ 4.007] num_entries = 0,
[ 4.007] restoring = "false",
[ 4.007] backup_error = "not started",
[ 4.007] restore_error = "not started",
[ 4.007] }
[ 4.007]
I already tried having one hand pressing less volume and power
I blankflashed my device and it worked, right now I don't know what else to do after that
Korax94 said:
I blankflashed my device and it worked, right now I don't know what else to do after that
Click to expand...
Click to collapse
You must install stock rom using fastboot mode. Chek instructions in this thread - https://forum.xda-developers.com/moto-g7/how-to/manually-update-g7-using-fastboot-t3917381
Could someone kindly describe how to unbrick Moto G7 XT1962-1 RETUS Factory unlocked model
Korax94 said:
I blankflashed my device and it worked, right now I don't know what else to do after that
Click to expand...
Click to collapse
Could you upload the blankflash you used?