Guys,
can I use them both together?
At the edges case goes way above edges of the display so I'm affraid it might break/get in touch with screen protector.
This is the protector I'd wish to use:
Related
What is a screen protector (preferably matte) that is good for this case and it does not peel at the edges because of the case pushing it?
I have no issues with the Steinhal SGP with this case. The screen protector is a bit smaller than the screen so there is no issue with the case pulling it off.
Hey guys, so I just got my membrane screen protectors for the nexus 4, installation was pretty quick and bubble-less. I noticed tho, not all of the surface is covered.. just the screen. The edges and the other parts of the frontal glass are not covered and therefore scratch-exposed. I googled a bit and found out there probably is no screenprotector which allows FULL cover of the surface.
Can you guys confirm? I think these Membrane protectors I got are just bad.. crazy cheap price for 6 protectors. They are crystal clear tho.
Bytecode said:
Hey guys, so I just got my membrane screen protectors for the nexus 4, installation was pretty quick and bubble-less. I noticed tho, not all of the surface is covered.. just the screen. The edges and the other parts of the frontal glass are not covered and therefore scratch-exposed. I googled a bit and found out there probably is no screenprotector which allows FULL cover of the surface.
Can you guys confirm? I think these Membrane protectors I got are just bad.. crazy cheap price for 6 protectors. They are crystal clear tho.
Click to expand...
Click to collapse
It has a slight curve at the edges which doesn't allow for complete adhesion, and at the top for the camera and prox sensors need to be open...so someone decided.
mrhiab said:
It has a slight curve at the edges which doesn't allow for complete adhesion, and at the top for the camera and prox sensors need to be open...so someone decided.
Click to expand...
Click to collapse
Thanks man. So which protector covers more?
I always have taken my phones to Ghost Armor, they cover everything for $40. They'll replace all of it for $10. It's almost rubber feeling but it's crystal clear.
ZULU2189 said:
I always have taken my phones to Ghost Armor, they cover everything for $40. They'll replace all of it for $10. It's almost rubber feeling but it's crystal clear.
Click to expand...
Click to collapse
$40? That's a lot for a screen protector. I'll just stick to Membrane protectors
To anyone having tried both Membrane screen protectors and Mediadevil protectors, which one is the best? My membrane protectors get veeeery dirty with fingerprints and crap, and cleaning up is not that easy. Crystal clear tho.
The screen protectors have to expose a few essential parts like the the front camera and proximity sensors etc. I don't see what the problem is as just about all of them cover a large percentage, unless you want to paint the phone in wood gloss.
You can use Skinomi wet screen protector and it seems to have a larger surface area and curves around the side edges of the phone. But that expose the screen protector to cases, when you put a case on, the case edges will dig into the screen protectors and lift it up. Skinomi is pretty good with resisting fingerprints and smudges for me.
I'm currently using the "iloome tempered glass" and the only thing it exposes are the front sensors.
eksasol said:
The screen protectors have to expose a few essential parts like the the front camera and proximity sensors etc. I don't see what the problem is as just about all of them cover a large percentage, unless you want to paint the phone in wood gloss.
You can use Skinomi wet screen protector and it seems to have a larger surface area and curves around the side edges of the phone. But that expose the screen protector to cases, when you put a case on, the case edges will dig into the screen protectors and lift it up. Skinomi is pretty good with resisting fingerprints and smudges for me.
I'm currently using the "iloome tempered glass" and the only thing it exposes are the front sensors.
Click to expand...
Click to collapse
Ordered a couple Mediadevil today from Amazon, in a week or so I'll get them. Don't mind if it doesn't cover the entire surface (btw I knew FFC and proximity sensors don't have to be covered).
I still have the screen protector that came when the phone shipped on the back screen. Do you use a screen protector and if not did the screen scratch easily? Is the rear screen made of gorilla glass like the front or something easier to break?
sportsfan986 said:
I still have the screen protector that came when the phone shipped on the back screen. Do you use a screen protector and if not did the screen scratch easily? Is the rear screen made of gorilla glass like the front or something easier to break?
Click to expand...
Click to collapse
Both of the screen are supposedly made of Gorilla Glass. Personally I don't use any kind of screen protectors, and no scratches yet. I do keep good care of my device, though.
I think the best protection would be the bumber. That way you would avoid scratches from surfaces when you set your phone down, and get some protection in case you dropped your phone.
I use a screenprotector on front and back. On the back I find it improves clarity (less fuzzy) and has better grip. See here for a review. I agree with Jeopardy that a bumper is best for protection (ialso have).
Anyone here use the phone naked ( without the case ) or at lease with full body film protector? I am thinking to go case less because it adds weight and takes away the natural design/feel of the phone.
I use the phone with a slim case but to date I have not been able to find a screen protector that works. I am finding the tempered glass is far from perfect and leaves a very small pocket of space between it and the glass making me have to press harder in some areas to get the screen to respond. I hate to do it but I think I will have to use my S8 with no screen protector until someone can come up with a tempered glass protector that has glue all over instead of just around the edges.
I'm running an IQ Shield full skin. Fitment is spot on. It's got Front, back and all the sides covered.
Whitestone Dome Glass is a glass protector with adhesive all around. It's a complex process to apply, but if you get it right, it works. I have one here, but I haven't applied it. The glass is case friendly and covers slightly less that a full screen. I may use it at some point, though.
I generally always use phones naked out of appreciation for the design.
Too bad there's still no tempered glass protectors for curved screens so it's kinda risky..
Currently using naked and I find my finger gets sore from holding at bottom of phone by using one handed from the usb port so will be putting my case on soon for comfort.
Recently got this phone and it's great!
But it came with a screen protector which seems to pick up more grease than my other phone.
I get the rainbow effect across my screen in some places coz of the oil.
Is this just me or has this happened to anyone else?
Do I need to replace the screen protector?
Yes, I had the same problem with the standard screen protector. I haven't had any luck with a tempered glass protector, since I still need to clean my screen often, but it's not as often as before.
You will find the clear tempered glass has the halo effect on the edges of the screen though. I don't think you'll find the "perfect" tempered glass, but having any screen protector is better than not having one at all.