Hello everyone,
I worked hard and finally found lots of tools and lots of information for ZTE Nubia Alpha. Since XDA forum doesnt have too many information I would like to put them in one thread.
What do we need to know very beginning :
Which version you have ?
If you have Chinese version you dont need to install additional launcher.
If you have Global version you need to install additional launcher for finding and using applications.
INSTALLING APPLICATIONS
Click to expand...
Click to collapse
NAI : Nubia Application Installer (NAI) DOWNLOAD(Link Updated)
Mirror Mail.ru
Please extract to seperate folder without space or non-latin chars. ( Example C:\Nubia\ )
Connect your watch to PC.
Run Application.
Drag and drop apk file on NAI window.
If device is detected and file is correct screen will look like below.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After click "INSTALL" wait a few seconds or minutes to see success message. Picture attached below.
Installing TWRP and/or Custom Launcher for Global Version
Click to expand...
Click to collapse
WARNING : This process is highly risky and needs very thin fingers. I suggest to use phone pen (like samsung s-pen) or your smallest finger for further process !
Download files from HERE (Link updated 07/AUG/2021)
Mirror Mail.ru
Please extract to seperate folder without space or non-latin chars. ( Example C:\Alpha\ )
Double click "LaunchTWRP.bat" and your Watch will start on TWRP.
Touch "MOUNT"
Tick all boxes (System,Cache,Data,Modem)
Go back to root menu
Copy "nubia_Calendar.apk" file to your watch root. Go to "My Computer" and you will see your watch connected as a device and when you double click you will access to root of your internal memory of watch.
Go back to Watch and hit "Advanced" and choose "File Manager" from list.
You will see whole folders very small. Try to find "sdcard" and choose.
You will see root of your watch. Hit "nubia_Calendar.apk" and hit "Copy"
Go back to folders list and go to "System -> App -> Nubia Calendar" folder
You will see files inside. Scroll bottom right and hit "Blue Triangle icon" to paste copied APK file.
You will see TWRP confirmation slide. Slide Left to Right for paste.
Hit Reboot and do not install twrp if it asks you.
After all system will reboot. Go to applications and touch Calendar/Schedule app.
Voila you will go to your new launcher.
eSim Activation
Click to expand...
Click to collapse
First download Nubia application CN edition from here : MIRROR 1 or Nubia Website
Search online for "receive SMS for chinese phone numbers online". I cant suggest any websites sorry for that.
And rest will be done on Nubia App.
I am not responsible any kind of damages on your PC, Watch or phone guys. Use all procedures on your own risks.
All credits goes to creators "Scarlet Glass"
If you want to buy me a coffee please click following : Buy Me A Coffee.
Thank you very much!
That sounds very promising - I got my CN-Version (I am in Europe) on Tuesday and (of course) the eSIM does not work. That's my only concern - I'd like to get it to work So according to your post you just have to install the updated wear-app and use one of those phone-numbers for registration (I already got the tipp with the new app, but was not able to register, of course - again ) And then you have access to eSIM-activation right out of the app? Right now with the alpha I'd need a WeChat-Account, which (of course as I'm in Europe) does not provide the eSIM-activation :-(
Edit: hm.. just copied NAI.exe, but it was detected as a virus-threat: "W32.Auto:b2773011ee.in03.Talos" - are you sure that this is ok?!
hellraisertg72 said:
Thank you very much!
That sounds very promising - I got my CN-Version (I am in Europe) on Tuesday and (of course) the eSIM does not work. That's my only concern - I'd like to get it to work So according to your post you just have to install the updated wear-app and use one of those phone-numbers for registration (I already got the tipp with the new app, but was not able to register, of course - again ) And then you have access to eSIM-activation right out of the app? Right now with the alpha I'd need a WeChat-Account, which (of course as I'm in Europe) does not provide the eSIM-activation :-(
Edit: hm.. just copied NAI.exe, but it was detected as a virus-threat: "W32.Auto:b2773011ee.in03.Talos" - are you sure that this is ok?!
Click to expand...
Click to collapse
NAI exe detects virus but I didnt have any issues with system-wide. Better delete after you install APKs.
I used CN Sms number from internet activated with CN Nubia app. I could see eSIM management section on Nubia app. Will upload a video soon for it.
oops, i found nai in alpha pack. thank you very much
benzersizadam said:
Здравейте всички,
Работих усилено и накрая намерих много инструменти и много информация за ZTE Nubia Alpha. Тъй като форумът на XDA няма твърде много информация, бих искал да ги поставя в една нишка.
Какво трябва да знаем още в началото:
Коя версия имате?
Ако имате китайска версия, не е необходимо да инсталирате допълнителен стартер.
Ако имате глобална версия, трябва да инсталирате допълнителен стартер за намиране и използване на приложения.
NAI: Nubia Application Installer (NAI) ИЗТЕГЛЯНЕ
Моля, извлечете в отделна папка без интервал или нелатински символи. (Пример В: \ Нубия \)
Свържете часовника си с компютър.
Стартирайте приложението.
Плъзнете и пуснете apk файл в прозореца на NAI.
Ако устройството е открито и файлът е правилен, екранът ще изглежда по-долу.
[ATTACH = пълно] 5321379 [/ ATTACH]
След като кликнете върху „INSTALL“, изчакайте няколко секунди или минути, за да видите съобщението за успех. Снимка, приложена по-долу.
[ATTACH = пълно] 5321383 [/ ATTACH]
ВНИМАНИЕ: Този процес е силно рисков и се нуждае от много тънки пръсти. Предлагам да използвате телефонна писалка (като samsung s-pen) или най-малкия си пръст за по-нататъшен процес!
Изтеглете файлове от ТУК
Моля, извлечете в отделна папка без интервал или нелатински символи. (Пример C: \ Alpha \)
Щракнете двукратно върху „LaunchTWRP.bat“ и вашият часовник ще стартира на TWRP.
Докоснете „MOUNT“
Поставете отметки във всички полета (Система, Кеш, Данни, Модем)
Върнете се в основното меню
Копирайте файла "nubia_Calendar.apk" в корена на часовника си. Отидете на "Моят компютър" и ще видите, че часовникът ви е свързан като устройство и когато щракнете двукратно, ще получите достъп до корен на вашата вътрешна памет на часовника.
Върнете се в Watch и натиснете "Advanced" и изберете "File Manager" от списъка.
Ще видите много малки папки. Опитайте се да намерите "sdcard" и изберете.
Ще видите корен на часовника си. Натиснете "nubia_Calendar.apk" и натиснете "Копиране"
Върнете се в списъка с папки и отидете на папка "Система -> Приложение -> Нубийски календар"
Ще видите файлове вътре. Превъртете долу вдясно и натиснете „Синята икона на триъгълника“, за да поставите копирания APK файл.
Ще видите слайд за потвърждение на TWRP. Плъзнете отляво надясно за поставяне.
Натиснете Рестартиране и не инсталирайте twrp, ако ви попита.
В крайна сметка системата ще се рестартира. Отидете в приложенията и докоснете приложението Календар / График.
Voila ще отидете на новия си стартер.
Първо изтеглете приложението Nubia CN издание от тук: MIRROR 1 или Nubia Website
Търсете онлайн за „получаване на SMS за китайски телефонни номера онлайн“. Не мога да предложа никакви уебсайтове, съжалявам за това.
И почивката ще бъде направена в приложението Nubia.
Не нося отговорност за каквито и да е щети на вашия компютър, часовник или телефон. Използвайте всички процедури на свой собствен риск.
Всички кредити отиват за създателите "Алено стъкло"
Ако искате да ми купите кафе, моля, щракнете върху: Купи ми кафе.
Click to expand...
Click to collapse
the NAI.exe file has been removed, but I found it a little further down in the Zip files for the Global version, thanks. I have a registration with a Chinese number and I also have a WeChat account. I only needed this file to add apps to my Nubia Alpha and then see what it would look like
Please link again, old one won't load. THK.
Link updated
benzersizadam said:
Link updated
Click to expand...
Click to collapse
I have question! i got allow for eSim scan QR code but maybe only works by Chinese providers. If i buy eSim in Europe i think will not works on my Nubia Alpha, what can i do. Have i do global version on my Nubia or can i got some other way for activate/enable my calls, during is it Bluetooth connection i can't reply calls, because i recive all notifications even reply messages, but about the calls i can't. It's so strange everything, but I'm not give up. I love my Nubia Alpha Gold version it's luxury. They pushing me to buy Chinese eSim from Unicom.... Can i get other option to enable my calls without changing to global version. I won't to do it only for this one problem. We must find solution. Everything else works great. Thanks
link again dead pls link again. thx
Please, please update the link for alphapack zip, is not available I bought this strange watch and want to do some thing with it,
pack will be uploaded end of 07 08 2021 est
benzersizadam said:
pack will be uploaded end of 07 08 2021 est
Click to expand...
Click to collapse
Wow, thanks, really really thanks for this, I will preserve the pack in my cloud storage when is available Greetings from Mexico.
benzersizadam said:
NAI exe detects virus but I didnt have any issues with system-wide. Better delete after you install APKs.
I used CN Sms number from internet activated with CN Nubia app. I could see eSIM management section on Nubia app. Will upload a video soon for it.
Click to expand...
Click to collapse
@benzersizadam:
WOW, this is AMAZING: thank you soooo much for your very appreciated efforts!
I am in the process of trying your procedure. Unfortunately, the file package for TWRP launcher is blocked by Mediafire which detects it as "dangerous"(so not antivirus related). Is there a way to re-upload it again, maybe somewhere else?
Being able to install additional apps is fantastic!!
I do have a couple of questions. My goal eventually would be to be able to install and run a custom app written by me. Do you think this method allows to do this or only "official" apks can be installed?
Does this procedure work for the Nubia Watch (I mean the model after the Nubia Alpha) as well?
Thanks a lot!
#FreeNubiaAlphaOS
dgnoise75 said:
@benzersizadam:
WOW, this is AMAZING: thank you soooo much for your very appreciated efforts!
I am in the process of trying your procedure. Unfortunately, the file package for TWRP launcher is blocked by Mediafire which detects it as "dangerous"(so not antivirus related). Is there a way to re-upload it again, maybe somewhere else?
Being able to install additional apps is fantastic!!
I do have a couple of questions. My goal eventually would be to be able to install and run a custom app written by me. Do you think this method allows to do this or only "official" apks can be installed?
Does this procedure work for the Nubia Watch (I mean the model after the Nubia Alpha) as well?
Thanks a lot!
#FreeNubiaAlphaOS
Click to expand...
Click to collapse
Link is just updated.
I tried to install too many apps and lots of them have been installed . But not all of them works good or even works. Sometimes they crashes. Main reason is resolution.
Also I never tried on Nubia Watch. But I bet TWRP will not work.
Regards
Alpha Pack link updated
benzersizadam said:
Alpha Pack link updated
Click to expand...
Click to collapse
again not working
supersonpua86 said:
again not working
Click to expand...
Click to collapse
All links tested and working.
benzersizadam said:
All links tested and working.
Click to expand...
Click to collapse
supersonpua86 said:
View attachment 5357439
Click to expand...
Click to collapse
Better try another browser m8.
benzersizadam said:
View attachment 5357473
Better try another browser m8.
Click to expand...
Click to collapse
i think i have some DNS problem. with TOR all is working. thx
Related
Somebody, help me please.. I need to make a hard reset, but WM5.0 doesn't give me to do it b/c of its persistent storage... but standard WM5.0 HardReset Utility can't be started..
please help
(Standard combinations of buttons do not accepted)
GeoKVANt said:
Somebody, help me please.. I need to make a hard reset, but WM5.0 doesn't give me to do it b/c of its persistent storage... but standard WM5.0 HardReset Utility can't be started..
please help
(Standard combinations of buttons do not accepted)
Click to expand...
Click to collapse
To press simultaneously buttons: on, a choice of a network, a dictophone and reset by styles, other wait... Press sent
GeoKVANt said:
Somebody, help me please.. I need to make a hard reset, but WM5.0 doesn't give me to do it b/c of its persistent storage... but standard WM5.0 HardReset Utility can't be started..
please help
(Standard combinations of buttons do not accepted)
Click to expand...
Click to collapse
To press simultaneously buttons: on, a choice of a network, a dictophone and reset by styles, other wait... Press sent
GeoKVANt said:
Somebody, help me please.. I need to make a hard reset, but WM5.0 doesn't give me to do it b/c of its persistent storage... but standard WM5.0 HardReset Utility can't be started..
please help
(Standard combinations of buttons do not accepted)
Click to expand...
Click to collapse
To press simultaneously buttons: on, a choice of a network, a dictophone and reset by styles, other wait... Press sent
telemix said:
GeoKVANt said:
Somebody, help me please.. I need to make a hard reset, but WM5.0 doesn't give me to do it b/c of its persistent storage... but standard WM5.0 HardReset Utility can't be started..
please help
(Standard combinations of buttons do not accepted)
Click to expand...
Click to collapse
To press simultaneously buttons: on, a choice of a network, a dictophone and reset by styles, other wait... Press sent
Click to expand...
Click to collapse
а по-русски?
Have you tried a Software to reset the same and see if it does? many available...
rgs/DD
Ïðè âûêëþ÷åííîì Wizard'å íàæàòü îäíîâðåìåííî òðè êíîïêè è óäåðæèâàòü èõ: âêëþ÷åíèå, ñëåâà âåðõíÿÿ (âûáîð ðåæèìà ðàáîòû ñ ñåòüþ), ñïðàâà âåðõíÿÿ (ãîëîñîâîé íàáîð). Äàëåå ñäåëàòü ñáðîñ ñòèëóñîì è ïðè ýòîì êíîïêè íå îòïóñêàòü è æäàòü... Äàëåå äåéñòâîâàòü ïî íàäïèñè íà äèñïëåå.
I think the easy way would be to use the clear data funtion on the device, select and put in the password stated .. Much the same as the c550 . I remember seeing a screenshot of this application on one of the device reviews.. Bit confused on the button thing above :wink:
Good Luck
devdarshan Can you give me e-address for these programs?
wardy said:
I think the easy way would be to use the clear data funtion on the device, select and put in the password stated .. Much the same as the c550 . I remember seeing a screenshot of this application on one of the device reviews.. Bit confused on the button thing above :wink:
Good Luck
Click to expand...
Click to collapse
"Trust me I know what I'm doing" (c)
The problem is (actually WAS, already) that this function wasn't available b/c of soft reset was made during customization of device with russian ROM...
telemix, на моей прошивке не захотел он так делать... или я просто не смог сделать всё с точостью как ты предлагаешь... хотя и english version of your suggestion I understood (как оказалось :wink: )
only re-FLASHing of device helps in that case
À â boot ïåðåõîäèò ïðè âûêëþ÷åííîì ñîñòîÿíèè (âûíóòü áàòàðåéêó íà 5 ñåêóíä) è íàæàòèè îäíîâðåìåííî: ïðàâîé âåðõíåé, ïðàâîé íèæíåé (äåðæèì) è ñòèëóñîì ñáðîñ?
À â boot ïåðåõîäèò ïðè âûêëþ÷åííîì ñîñòîÿíèè (âûíóòü áàòàðåéêó íà 5 ñåêóíä) è íàæàòèè îäíîâðåìåííî: ïðàâîé âåðõíåé, ïðàâîé íèæíåé (äåðæèì) è ñòèëóñîì ñáðîñ?
telemix said:
À â boot ïåðåõîäèò ïðè âûêëþ÷åííîì ñîñòîÿíèè (âûíóòü áàòàðåéêó íà 5 ñåêóíä) è íàæàòèè îäíîâðåìåííî: ïðàâîé âåðõíåé, ïðàâîé íèæíåé (äåðæèì) è ñòèëóñîì ñáðîñ?
Click to expand...
Click to collapse
В бут загоняется легко... а толку.. здесь же персистент... он из бута каким был, таким и возвращается..спасает только перепрошивка аппарата
russian ROM Update for Wizard
Íàðîä, ïîäñêàæèòå ãäå âçÿòü ðóññêóþ ïðîøèâêó äëÿ qtek 9100?
I have Navitel Navigator software in my current, official ROM, but I wish to flash new WWE. Can you extract Navitel from Rus version of ROM and add to WWE? Or get me .cab version of this soft.
Thanks.
http://4pda.ru/forum/dl/post/379543/NaviTel_setup_HTC_LEO_3.2.6.7318.cab
this is an extract of Leo Navitel cab
Actually you don't need Navitel in ROM. Copying & pasting it to storage card is enough.
kiman1 said:
http://4pda.ru/forum/dl/post/379543/NaviTel_setup_HTC_LEO_3.2.6.7318.cab
this is an extract of Leo Navitel cab
Click to expand...
Click to collapse
Big Thanks.
May be you know, where I can get russian default keyboard for Leo?
.
Henry_Lee said:
Big Thanks.
May be you know, where I can get russian default keyboard for Leo?
.
Click to expand...
Click to collapse
http://4pda.ru/forum/dl/post/352690/Football_Touch_HD2_KeyboardNew.cab
I guess that you read Russian. If yes, go to http://4pda.ru/forum/index.php?showtopic=144008 (FAQ section) anf you'll find more regarding LEO russification
Thanks again.
I already found this .cab, but thanks anyway.
I'll try to read this russian thread, but for now I just want to flash cooked ROM for fixing some SMS and notification problem. For this I need to have Navitel and Russian keyboard soft .cab. Now I'll try to flash this ROM http://forum.xda-developers.com/showthread.php?t=606932
Looks like nice.
You could also try my firmware if you need stable WWE with Russian localization: HTC HD2: HTC_Leo_WWE-1.61.468.1-djet - 4PDA
djet said:
You could also try my firmware if you need stable WWE with Russian localization: HTC HD2: HTC_Leo_WWE-1.61.468.1-djet - 4PDA
Click to expand...
Click to collapse
Its intersting, but I need to ROM with Manila and Sense. I tried SPB Mobile Shell and return to standart interface of HD2.
And your ROM has fix for normal working of SMS? I have two serios problem with standart ROM v.1.48:
1. When I tried to answer on SMS I have very slow loading of SMS chat.
2. Problem with notification. After several times of SMS notifications I got silent mode and notification arrived without sound and stuck.
And because this I think will to try ROM with new WM 6.5.3 and without Sense Messaging.
.
Henry_Lee said:
Its intersting, but I need to ROM with Manila and Sense. I tried SPB Mobile Shell and return to standart interface of HD2.
And your ROM has fix for normal working of SMS? I have two serios problem with standart ROM v.1.48:
1. When I tried to answer on SMS I have very slow loading of SMS chat.
2. Problem with notification. After several times of SMS notifications I got silent mode and notification arrived without sound and stuck.
And because this I think will to try ROM with new WM 6.5.3 and without Sense Messaging.
.
Click to expand...
Click to collapse
There will Sense-enabled builds as long as standalone installable Sense version.
My ROM is built from official 1.61 WWE. SMS fix seems to be already present in 1.61fw. At least it won't install as a patch.
6.5.3 for me is rather a toy build. No support, no stability.
djet said:
There will Sense-enabled builds as long as standalone installable Sense version.
My ROM is built from official 1.61 WWE. SMS fix seems to be already present in 1.61fw. At least it won't install as a patch.
6.5.3 for me is rather a toy build. No support, no stability.
Click to expand...
Click to collapse
Ok. When will be make build with Sense?
Navitel doesn`t work properly on HD2, even after the last patch on 30/12/09. It quits with a message kind of: "Not enough memory. About 1,5 Mbytes needed, but only 2,5 Mbytes fragmented memory is available". It occures even when there are more than 180 Mbytes of free memory. Navitel tried to fix this error but unsuccessfully.
Хочу передать привет модератору-мудаку, забанившему меня за 4pda за то, что я сказал, что обновление билда 7318, назначенное исправить ошибку с "нехваткой памяти" на HD2, не работает, и навител на HD2 по-прежнему продолжает вылетать.
Мудер с погонялом GrRusel, или как там тебя подзывают.. Штоб те грОши, которые ты получаешь от навитела, были твоей самой большой радостью в жизни, дешёвка.
Henry_Lee said:
Ok. When will be make build with Sense?
Click to expand...
Click to collapse
An updated build is available in two flavours:
HTC HD2: HTC_Leo_WWE-1.61.468.1-djet - 4PDA
djet said:
An updated build is available in two flavours:
HTC HD2: HTC_Leo_WWE-1.61.468.1-djet - 4PDA
Click to expand...
Click to collapse
Thanks, I'll try to test it at nearest time.
But I don't understand how I can disable your tweaks? I don't using +Àâòîìàòè÷åñêîå âêëþ÷åíèå ãðîìêîãîâîðÿùåé ñâÿçè â ïîëîæåíèè ýêðàíîì âíèç ("SupportOpenSPKInFaceDown"=dword:00000001)
for example. And many, many other things....
Can you post small guide or FAQ for tunning your ROM?
.
kiman1 said:
http://4pda.ru/forum/dl/post/379543/NaviTel_setup_HTC_LEO_3.2.6.7318.cab
this is an extract of Leo Navitel cab
Click to expand...
Click to collapse
is it trial ir registered?
plz send a link to dl in an englisg site.
Anonymous6372 said:
is it trial ir registered?
plz send a link to dl in an englisg site.
Click to expand...
Click to collapse
Of course is unregistered version. If you bought HD2 in Russia you got license card for this with serial number.
Henry_Lee said:
Thanks, I'll try to test it at nearest time.
But I don't understand how I can disable your tweaks? I don't using +Àâòîìàòè÷åñêîå âêëþ÷åíèå ãðîìêîãîâîðÿùåé ñâÿçè â ïîëîæåíèè ýêðàíîì âíèç ("SupportOpenSPKInFaceDown"=dword:00000001)
for example. And many, many other things....
Can you post small guide or FAQ for tunning your ROM?
.
Click to expand...
Click to collapse
Most of the registry changes are documented in changelog. To undo any you should either open the corresponding registry key or search for a specified value. Working with registry is a common knowledge, just search for any guide.
djet said:
Most of the registry changes are documented in changelog. To undo any you should either open the corresponding registry key or search for a specified value. Working with registry is a common knowledge, just search for any guide.
Click to expand...
Click to collapse
Ok, thanks again.
But are you sure that all this tweaks can be changed by the registry?
Henry_Lee said:
Ok, thanks again.
But are you sure that all this tweaks can be changed by the registry?
Click to expand...
Click to collapse
Well, my policy is making firmware as much close to original as possible, so all the changes are revertible. Most of the tweaks do not affect the system as a whole, only a small part of it. The only included patches are HTC's. No 3rd party code or beta quality packages included.
Henry_Lee said:
Of course is unregistered version. If you bought HD2 in Russia you got license card for this with serial number.
Click to expand...
Click to collapse
This is not true. I bought in russia from a official delaer an received only a 15 days copilot trial, but an installed Navitel.
At least end of october till end of november HTC sold in Russia EU-boxes branded to russian. There could be also installed only Russian or WWE east-europe ROMs
narod.ru/disk/40719114001/All_in_one_Vitaly_v23_Adrenaline.zip.html
Does this kernel already contain the latest adrenalinshot ?
Which features are included? Please make some discriptions in your topics.
Gesendet von meinem GT-I9001 mit Tapatalk
Very loud! Well holds the battery! It is built in adrenalin v13.Устанавливать on a drain and on fashions!
At me a problem with languages
new!!!!!
narod.ru/disk/40770268001/boot.img.html
http://narod.ru/disk/40773439001/boot.img.zip.html
new kernel!!!!
Изменены параметры LMK, поставил для тестов VR, ну нравица мне как он работает, чуть уменьшил звук и засунул родную картинку, надоела мне птица. Честно - влом паковать, времени нет, для знающих как шить - шейте, для незнающих -знающие сделают архив для CWM
сделал vitaly_y
alexyuh said:
Изменены параметры LMK, поставил для тестов VR, ну нравица мне как он работает, чуть уменьшил звук и засунул родную картинку, надоела мне птица. Честно - влом паковать, времени нет, для знающих как шить - шейте, для незнающих -знающие сделают архив для CWM
сделал vitaly_y
Click to expand...
Click to collapse
English, please !
In latest version changed the LMK settings (adrenaline 1.4), slightly reduced volume, VR sheduler, Ondemand, stock boot logo
I tried to make a kernel with a smooth operation, good savings, enhanced sound, so it does not support the dispersal of more than 1500 MHz, and not supports software voltage control, I do not need it.
The latest version fixes compress photos.
Test it and post the results.
he add /system/xbin/bb in init.rc
and tun.ko
Not dev
Thread closed
Has anyone had success changing the logos of the standard radio app?
Over at 4PDA is has been done for Russian stations but was not explained how to do it.
Obviously need to unpack, change the logos and edit possibly an xml.
CC2 logo radio based on SPRO design
SPRO Radio Mod by lekha1980 from 04/13/2020
ˇNoAM mod from 03.24.2020
ˇNoAM mod from 03.24.2020 RUS + UKR
ˇSolving the problem with the sound of applications on the background of the radio , the result .
ˇList of cities from the base for the radio (default) .
ˇCC2 radio with logos for SPRO.
ˇRadio with a list of stations (Minsk).
ˇFor those who have a radio flies.
ˇHow to set up the display of logos of radio stations (TODO: check relevance).
wooldogsinc said:
Has anyone had success changing the logos of the standard radio app?
Over at 4PDA is has been done for Russian stations but was not explained how to do it.
Obviously need to unpack, change the logos and edit possibly an xml.
Click to expand...
Click to collapse
It is actually really simple, but an awful load of work.
No matter whether you use apktool or unzip, you will find inside the apk in res/raw/, a radio_freqs.json file. This contains "all" frequencies for the several radio stations per "frequency region" for Russia (in this case).
This json file links to images which are stored in /res/drawable-nodpi-v4. You can download DAB+ logos for your country and redo the json file with frequencies, names and logos, but it is a lot of work.
As the radio app on the Joying and T'eyes are actually the same, I considered doing it for my Joying, but the sheer amount of work stopped me (and I already have DAB+).
As example see attached the zipped radio_freqs_json.zip and a listing of the use logos.
Thanks @surfer163 really appreciate it. I might just do it for a few regions rather than my whole country. I'll get to work tomorrow.
Добрый день! Пожалуйста помочь. Я устал перестраивать радиостанции каждый раз после мигания. Можно ли заранее определить (где и как), что, на FM 1-1 будет радиостанция Europe Plus, на 1-2 будет Радио Monte Carlo и т. д. И что такое параметр" userRadios": [] в radio_freqs.файл json?
Good afternoon! Please help. I'm tired of re-tuning the radio stations every time after flashing. Is it possible to determine in advance (where and how) what, on FM 1-1 there will be a radio station Europe Plus, on 1-2 there will be radio Monte Carlo, etc. And what is the "userRadios": [] parameter in the radio_freqs.json file?
looking to replace my stock head unit in my rogue. would like to keep as many stock features as possible. was looking at head units from the mainstream brands like Kenwood and pioneer, but they are quite expensive and I lose out on some features.
if possible would like a relatively easy install process.
what brands would you recommend, was looking at this joying head unit.
https://www.joyingauto.com/2014-nis...isp-screen-android-car-multimedia-player.html
saw this one and it looks to use just about every stock plug. it is a bit out of my price range though.
https://kvphoenixautomotiveinc.com/...d-navigation-radio-for-nissan-rogue-2014-2017
" Jkiejr said:
ищу замену моего запасного головного устройства в моем rogue. хотелось бы сохранить как можно больше функций запаса. я смотрел на головные устройства от основных брендов, таких как Kenwood и pioneer, но они довольно дорогие, и я теряю некоторые функции.
если возможно, хотелось бы относительно простой процесс установки.
какие бренды вы бы порекомендовали, глядя на это радостное головное устройство.
https://www.joyingauto.com/2014-nis...isp-screen-android-car-multimedia-player.html
я видел этот штекер, и он, похоже, использует почти каждый штекер запаса. хотя это немного выходит за рамки моего ценового диапазона.
https://kvphoenixautomotiveinc.com/products/px6-six-core-12-1-vertical-screen-android-navigation-radio-for-nissan-rogue-2014-20
Головные устройстваTEYES SPRO+/CC2+/СС3 и Kingbeats K2+ Android 10 - Обсуждение - 4PDA
Click to expand...
Click to collapse
Forgot to mention I live in the US
If you want a "standard' type try this model. https://www.aliexpress.com/item/100...earchweb0_0,searchweb201602_,searchweb201603_
If you want a 'Tesla Style" try this model: https://www.aliexpress.com/item/4000581360510.html?spm=a2g0o.cart.0.0.334b3c00AXdqUk&mp=1
Knightbird68 said:
If you want a "standard' type try this model. https://www.aliexpress.com/item/100...earchweb0_0,searchweb201602_,searchweb201603_
If you want a 'Tesla Style" try this model: https://www.aliexpress.com/item/4000581360510.html?spm=a2g0o.cart.0.0.334b3c00AXdqUk&mp=1
Click to expand...
Click to collapse
I think I will try the more standard one, is that a good brand? See lots of reviews on youtube of the joying brand
Joying is just a reseller, they are literally ALL made by the same company. And they all get the same BASIC support. There is NO support or updates offered or implied. YMMV!