Related
eg. if my device is n880, but I installed a rom of V880.
How can I save my device? Or it becomes a stone ?
tks.
It depends how you install it, if you used clockworkmod then you're ok, just install another working rom with clockworkmod.
If you installed it using zte update software for windows or an image.bin file then you might have broken it.
If you install a v880 rom on an n880 then it isn't going to work at all, they're totally different phones, but you can't permanently break it with clockworkmod, you can easily rescue it by installing a working n880 rom or restoring a backup.
Dear Seniors.
I am facing great hardship because my phone is stuck at boot logo.
No booting in recovery mode to flash another rom.
I did unlock bootloader of it by using tuliptool with success. After that i flashed custom rom in it. after reboot it is happening that.
Please suggest to recover it.
Did you flash twrp after unlocking? Did you make backup of stock ROM? Perhaps find a version of the factory firmware and flash that.
Dear I have no backup and i flashed TWRP recovery.......
It is to aware you that i did relock bootloader now my phone is working properly. but i am unable to enter recovery mode. !!!
Now my phone is running android 6.0.1 B02
But i am failed to root this rom uptill now due above mentioned problem.
modorate said:
Dear I have no backup and i flashed TWRP recovery.......
It is to aware you that i did relock bootloader now my phone is working properly. but i am unable to enter recovery mode. !!!
Now my phone is running android 6.0.1 B02
But i am failed to root this rom uptill now due above mentioned problem.
Click to expand...
Click to collapse
I found software update notification but when i update an error accruing while update. (This update not compatible with this device"
In easy words......... my recovery.img has been corrupted. I have no idea to get rid of this situation.
I planned to unlock my Mini's bootloader this weekend. After reading this post, I decided to act later until the root cause has been figured out.
bao_gg said:
I planned to unlock my Mini's bootloader this weekend. After reading this post, I decided to act later until the root cause has been figured out.
Click to expand...
Click to collapse
Several people myself included have been able to use tuliptool to successfully unlock and root the device.
mine is hard bricked too. but I think it is worse than the case listed on the op.
if you want to hard bricked these are the steps:
follow the procedure to install the Spanish ROM 6.1, than another android m b12, than finally the android seven......use tulip tool and install twpr fine, root ect. amazing ROM.......buuuuut......I lost my IMEI somewhere in this process, and the original FTM which had a small menu changes to another static one, without the menu.
I needed this menu to open the com port to fix the IMEI. than I had the brilliant idea to re-flash android M via twrp (without modifying the zip file to remove the recovery, something I knew so well from the older axon mini).
results:
-lost twpr because the stock ROM wrote over it,
-cannot boot the OS because I flashed android m but the phone had the aboot 7.
-i now have a brick
I need a genious to sujest something to bring it back to life........sh....t...sh...t.....sh...t
any chances I could inject aboot7 via ADB through my dead recovery which somehow the phone recognises? ADB shell still seems to be working
thanks
Hi there, good to see you.
After struggling to find any helpful information about rooting ZTE Blade A2 plus, I finally was able to root>soft brick>hard brick>stock flash>repeat this beautiful device. So thought to share it here so that it becomes helpful for someone in need.
Device Information: https://forum.xda-developers.com/ge...te-blade-a2-plus-5-5-fhd-mt6750t-3gb-t3480759
Prerequisite: Winrar Latest version, VCOM and device drivers (MT67xx), General intelligence to download the attachments and to arrange everything in order and you're good to go
Step 1: Install custom recovery (We'll install TWRP)
a} Download recovery and preloader
b} Download Scatter file
c} Download SP Flash tools
d} Only tick recovery and preloader and select the downloaded files and flash it
e} When the process finishes and SP flash tools displays done, remove the phone and press "Vol Up+Power" to boot into recovery. It may ask you to make /system writable if you want swipe as indicated
f} Done enjoy
Note: Take this opportuniy to first of all backup your stock rom using TWRP and save it elsewhere.
Step 2: Rooting (With Magisk Or Super SU)
a} Download Magisk or Super SU flashable zip as per your need
Note: Magisk gives most of the Super SU features and doesn't trips google security net so you are able to use banking apps while rooted with magisk
b} Place downloaded zip in your sd card
c} Boot into TWRP recovery and flash the said zip
d} Done enjoy
Step 3: Flashing stock rom (Only russian version as of now)-Language is english bloatwares are Russian
a} Download Stock Rom from https://yadi.sk/d/RZLBrKKv3LxejN
Note: It contains PC Flashable stock rom along with scatter files and NVRAM backups so it'll help if you lose IMEI during the process, it is advisable to keep this offline as backup in case links stops working.
b} Flash the downloaded stock rom with SP flash tools
Note: This stock rom doesn't support VOLTE so i advice you to first take a full backup of your initial rom after installing TWRP, also please share that backup here as well so as i could add it to this thread to make it helpful for someone who has already lost VOLTE inclusing me
Conclusion: I'll be very happy if this information proves useful to you in any manner and also request you to must share your backup for me to get VOLTE back.
Thank You
MIUI 9 For A610 Plus
Preview:
Many many thanks Alfonso for making this vary valuable post . I think A2 Plus and A610 Plus are almost same , so kindly check this ROM me and may solve your volte problem
ww.getdroidtips.com/miui-9-zte-blade-a610-plus/[/url]
Rajevpmavoor said:
Preview:
Many many thanks Alfonso for making this vary valuable post . I think A2 Plus and A610 Plus are almost same , so kindly check this ROM me and may solve your volte problem
ww.getdroidtips.com/miui-9-zte-blade-a610-plus/[/url]
Click to expand...
Click to collapse
Although the rom is bugless but, unfortunately VOLTE didn't work.
MIUI 9 For A610 Plus
Did you flash this new MIUI 9 ROM , I think it has volte and it is in Android M.
Alfonso Osnofla said:
Although the rom is bugless but, unfortunately VOLTE didn't work.
Click to expand...
Click to collapse
does it boot into meta mode on pressing volume down+power button??( bcoz my fone boots into meta mode on doing so)
and how to go into bootloader?
while using sp flash tool i power off the fone and then connect it to sp flash tool via usb cable ...fone gets detected and but download for twrp doesnt occur ..it says PMT changed for the rom, select format all+ download ....
but i didnt do format all coz i dont have flashable stock rom...
I lost my IMEI after flash ROM, not able to retrieve IMEI
Issue in camera & Finger Lock
Alfonso Osnofla said:
Although the rom is bugless but, unfortunately VOLTE didn't work.
Click to expand...
Click to collapse
I have checked both ROM, Miui ROM camera is look like .02MB, No VOLTE, Finger Print lock is not working
Thanks. I have messed up anyway...
Anybody have a complete Readback (Using SP-Flash Tools) copy of (volte) rom?
I lost Imei, From the given NVram.bin, Could not edit Imei using BPGL.... pull as Maui Meta and SN writer can not do this with present update.
I need to revert back. please help with ROM copy and NVRAM Edit.
Alfonso Osnofla said:
Hi there, good to see you.
After struggling to find any helpful information about rooting ZTE Blade A2 plus, I finally was able to root>soft brick>hard brick>stock flash>repeat this beautiful device. So thought to share it here so that it becomes helpful for someone in need.
Device Information: https://forum.xda-developers.com/ge...te-blade-a2-plus-5-5-fhd-mt6750t-3gb-t3480759
Prerequisite: Winrar Latest version, VCOM and device drivers (MT67xx), General intelligence to download the attachments and to arrange everything in order and you're good to go
Step 1: Install custom recovery (We'll install TWRP)
a} Download recovery and preloader
b} Download Scatter file
c} Download SP Flash tools
d} Only tick recovery and preloader and select the downloaded files and flash it
e} When the process finishes and SP flash tools displays done, remove the phone and press "Vol Up+Power" to boot into recovery. It may ask you to make /system writable if you want swipe as indicated
f} Done enjoy
Note: Take this opportuniy to first of all backup your stock rom using TWRP and save it elsewhere.
Step 2: Rooting (With Magisk Or Super SU)
a} Download Magisk or Super SU flashable zip as per your need
Note: Magisk gives most of the Super SU features and doesn't trips google security net so you are able to use banking apps while rooted with magisk
b} Place downloaded zip in your sd card
c} Boot into TWRP recovery and flash the said zip
d} Done enjoy
Step 3: Flashing stock rom (Only russian version as of now)-Language is english bloatwares are Russian
a} Download Stock Rom from https://yadi.sk/d/RZLBrKKv3LxejN
Note: It contains PC Flashable stock rom along with scatter files and NVRAM backups so it'll help if you lose IMEI during the process, it is advisable to keep this offline as backup in case links stops working.
b} Flash the downloaded stock rom with SP flash tools
Note: This stock rom doesn't support VOLTE so i advice you to first take a full backup of your initial rom after installing TWRP, also please share that backup here as well so as i could add it to this thread to make it helpful for someone who has already lost VOLTE inclusing me
Conclusion: I'll be very happy if this information proves useful to you in any manner and also request you to must share your backup for me to get VOLTE back.
Thank You
Click to expand...
Click to collapse
Just try http://www.ztedevice.com/support/detail?id=FE22BEF5C33D4A17BCDA20AAE2631951 ( http://download.ztedevice.com/support/product/569/201802111051594/sd/20180211105554767.zip )
sd card update using twrp.
But first remove the first line from update script file located inside the zip.
Just reply.
Need MIUI rom
Heyy plz gime me teh rom for zte blade A2 plus i really need a miui rom for zte blade A2 plus...
Help I'm confused.
Reading the comments i got to know that many people lost their IMEI and VOLTE , I want to root the device So can anyone tell me when does this problem occur (loosing volte and imei) during rooting or while flashing a custom rom?
kingksath said:
I lost my IMEI after flash ROM, not able to retrieve IMEI
Click to expand...
Click to collapse
Did you loose your IMEI on rooting or while flashing any custom Rom?
http://www.mediafire.com/file/6768c1x7dqyd818/update.zip
version 4 sd card update
vasilemk said:
http://www.mediafire.com/file/6768c1x7dqyd818/update.zip
version 4 sd card update
Click to expand...
Click to collapse
What is it for?
Is it for volte?
vasilemk said:
http://www.mediafire.com/file/6768c1x7dqyd818/update.zip
version 4 sd card update
Click to expand...
Click to collapse
Is this an update to the Stock Rom?
hi, can u help me please, iam tryin to update with twrp , i did remove first line from script but i have error.
Found a way to unlock bands on MTK based phones by flashing basebands from phones with the same chipset. Doing this by using SPFLASH and flashing md1 files. Still unable to connect to cell network on my Doogee bl12000. Flashed this phones MD1, was wondering if anybody could provide me with the nvdata and nvram from the ZTE blase a2 plus. Hoping by flashing those files can connect to a U.S. network.
Hi
I got my self in quite a pickle here..
so advice or help is very welcomed.
I own a Huawei P10 lite,
with a software version WAS-LX1AC900B049
First off I unlocked the phone, then flashed TWRP recovery, and thus far everything was ok
I wanted to install Lineage 14.1 OS, and I failed because my version of the phone is not supported..
but during attempt installation of Lineage OS , I deleted data, system, dalvik, and cashe..
I did not make a backup!!! (major mistake, I know..)
so effectively I deleted my OS :-/ ..
but it isn’t over jet..
because I could not find a stock rom, namely WAS-LX1AC900B049 version
I thought of debranding my phone to Orange, namely WAS-LX1AC109B110 because stock roms for Orange are available on the net.
so.. using TWRP I replaced oeminfo file..
(this time making a backup of oeminfo)
but once I downloaded Orange stock rom, put it on the
sdcard in /dload folder and entered download mode on the phone, nothing happened, update failed
but.. also changing oeminfo resets the system so I guess that turned off USB debugging..
so now the TWRP is not available because of the system reset, and in the fastboot and rescue mode , adb program from Windows, does not detect device..
so..
it seems I have 3 options..
1. somehow install Orange stock rom
2. make fastboot and rescue mode to work properly so I can reinstall TWRP and go further from there
3. find original stock rom WAS-LX1AC900B049, may be it will work
by the way erecovery does not work, it conects to the wifi, starts serching, and then fails
Help please..
I unbricked the phone
for anyone interested I used adb to unlock the phone in fastboot and rescue mode..
the phone was showing me a message that it was unlocked but it was not
once unlocked previously installed TWRP booted immediately, so from there I installed Lineage 14.1 by HassanMirza01 and it works great
Happy that you fixed your problem but how did adb detected your device as you mentioned it didn't at the first place?
Planning on going back to stock and I think the same trouble would happen for me too.
oH MY GOD!
ultragorki said:
Hi
I got my self in quite a pickle here..
so advice or help is very welcomed.
I own a Huawei P10 lite,
with a software version WAS-LX1AC900B049
First off I unlocked the phone, then flashed TWRP recovery, and thus far everything was ok
I wanted to install Lineage 14.1 OS, and I failed because my version of the phone is not supported..
but during attempt installation of Lineage OS , I deleted data, system, dalvik, and cashe..
I did not make a backup!!! (major mistake, I know..)
so effectively I deleted my OS :-/ ..
but it isn’t over jet..
because I could not find a stock rom, namely WAS-LX1AC900B049 version
I thought of debranding my phone to Orange, namely WAS-LX1AC109B110 because stock roms for Orange are available on the net.
so.. using TWRP I replaced oeminfo file..
(this time making a backup of oeminfo)
but once I downloaded Orange stock rom, put it on the
sdcard in /dload folder and entered download mode on the phone, nothing happened, update failed
but.. also changing oeminfo resets the system so I guess that turned off USB debugging..
so now the TWRP is not available because of the system reset, and in the fastboot and rescue mode , adb program from Windows, does not detect device..
so..
it seems I have 3 options..
1. somehow install Orange stock rom
2. make fastboot and rescue mode to work properly so I can reinstall TWRP and go further from there
3. find original stock rom WAS-LX1AC900B049, may be it will work
by the way erecovery does not work, it conects to the wifi, starts serching, and then fails
Help please..
Click to expand...
Click to collapse
YOU DID AS EXACTELLY AS ME ...HAHAHAHAHAHAHAH and now im still tryiong to find it solutution ...have you found some?
Hey!
Do anyone know if there a recovery or TWRP file for the ZTE blade A602?
Hi All. I would also like to know if there is a custom recovery TWRP image for my ZTE Blade A602 running Android 7.0?
Thanks for help Greetings Werner
TWRP is now available for Blade A602!
My friend @Linux4 made TWRP 3.3.1 for ZTE Blade A602! It is pretty stable but it has some bugs:
- MTP, use adb push/pull
- Data Decryption (can't mount)
Important:
- Before you restart to system in first TWRP use, flash the dm-verity ZIP or the System will not boot anymore!
- If you want to root, please use SuperSU, Magisk will softbrick the Device (stucks on Splash and reboots to recovery)
- Do not flash official update.zip in TWRP. Idk why this happens, but the system is a bit corrupted, so use Stock Recovery (TaskSwitcher dead, lags and more)
- Format FRP doesn't work, but we'll make a FRP Bypass-ZIP soon.
If you are interested, i'll make a Debloat ZIP for A602. If you find bugs, please report!
Because this is my first Post, I can't send links, so i'll post the Links to a Telegram Channel (you can still view even you don't have Telegram):
t.me/a602_twrp_dl
Hello xda-developers,
Thanks for your response. My ZTE Blade A602 2017 for Germany (Android 7.0) is soft-bricked after a bad flash. Currently I have access through sp-flash tool and fastboot commands. Because I had no TWRP recovery on my ZTE Blade A602 I was not able to get a complete backup. So I am also searching for ZTE Blade A602 firmware/stock rom in Mediatek (MTK) SP Flashtool format. Do you have any help therefore. Can you also tell me where to download your mentioned TWRP 3.3.1 custom recovery image?
Thanks for help, Greetings Werner
Hey wlink!
If you have access to your Stock Recovery, flash the stock update.zip. If you have Telegram, I can send you the Link. I'll add Stock ROM Link to the Channel.
Can you also tell me where to download your mentioned TWRP 3.3.1 custom recovery image?
Click to expand...
Click to collapse
You have to enter t.me/s/a602_twrp_dl in your Webbrowser and then download the latest Build from Mega. But do not flash stock Update.zip in TWRP, the system will be corrupted, idk why but I also provide Stock Recovery on Mega Folder!