moto g4 play xt1602 hard bricked (nougat last update) - Moto G4 Play Questions & Answers

i have moto g4 play xt1602 it was stuck on boot then i tried to repair with moto rescue software and it didnt work but i got flash file from auto detect so i thought it was flash file for my device because i got from moto software auto detect then i tried to flash manually after unlocking bootloader but i think i was not the correct file i flashed and my device hard bricked now no charge no recovery nothing can you help me pls and sorry for my bad english

[email protected] said:
i have moto g4 play xt1602 it was stuck on boot then i tried to repair with moto rescue software and it didnt work but i got flash file from auto detect so i thought it was flash file for my device because i got from moto software auto detect then i tried to flash manually after unlocking bootloader but i think i was not the correct file i flashed and my device hard bricked now no charge no recovery nothing can you help me pls and sorry for my bad english
Click to expand...
Click to collapse
Look in device manager for these.

Bro I it's already showing in device manager 9008 but I don't have blankflash file and thnx for replying

Try this I just searched on Google https://androidfilehost.com/?fid=962187416754460591

Related

Bricked device need help

hey guys can someone share singleimage file of moto g4 plus. my device is hard bricked it never boots in to boot loader or any thing , it just charges my device is detected as Qualcomm HS-USB QDLoader 9008 (COM3)
please help me my device is dead for past 12 hours
Charge the mobile for long time with Moto charger not pc,it may be due to battery drain ,I had the same problem ,when I consulted service centre they asked 8500₹ to change motherboard .I repaired my device by flashing Stocktom
MBM-CI For Moto G4 Plus Bassed on NPJ25.93-14 Bootloader
MBM-CI For Moto G4 Plus Bassed on NPJ25.93-14 Bootloader
Here you go
https://we.tl/WOhvfe5KcC
you must flash NPJ25.93-11 Stock ROM to bootup your device after flashing the blankflash
dude does it works for you ..??
freezing at boot logo
Hi guys i have a moto g4 plus and freezing at boot logo i did not on the usb debugging mode or active to unlock bootloader , is there any way to flash stock rom
mesac11 said:
Hi guys i have a moto g4 plus and freezing at boot logo i did not on the usb debugging mode or active to unlock bootloader , is there any way to flash stock rom
Click to expand...
Click to collapse
You do not need to unlock your bootloader to flash stock ROM.
Do i need to use some kinde of flash tool or fastboot is ok and usb debugging is off...
Any way thanks for the reply
mesac11 said:
Do i need to use some kinde of flash tool or fastboot is ok and usb debugging is off...
Any way thanks for the reply
Click to expand...
Click to collapse
https://forum.xda-developers.com/mo...d-7-0-install-nougat-official-t3531612/page28

My LG F800L doesn't turn ON after H918 kdz installation! HELPPPP

Hello.
First, sorry for my bad english..
I got the F800L model and I rooted the device following the guide of Dirty Santa.
One day I read in forum that someone was able to flash H918 rom to the F800L device.
So I tried to do same.. but with the mistake of not backing up my original rom.
When I tried to flash the H918 rom through TWRP, it installed well, but when it booted, it just remained hanged in LG logo.
I just left it over a day waiting if it pass the LG logo. But it didn't.
Then I searched for the fix and read the guide about restoring the bricked device through LGUP and kdz file.
So I entered in download mode and connected to PC.
Executed LGUP software and my device appeared in H91810i model instead of F800L. I downloaded the F800L kdz file and tried to restore with LGUP but it appeared error saying kdz invalid.
So I managed to download the H918 10i kdz file and tried again to restore.. and WOW! it completed the process.
But.. Now my device is in worse condition. It doesn't even turn on.
Tried to enter again in download mode but nothing happens.. neither enters in fastboot mode...
Pulled out the battery and reinserted, and tried to turn on but nothing happens..
Can anybody help me please???
I think you destroyed your phone
You should get it to repair service
lol, u just facing the same problem with me, i did exactly the same what u do, was looking around for solution, but nothing really helpful out there, the only way i found is the method with sd card, u get the debrick img file, burn it to a 32gb sd card with the right tool, put sd card to your phone and hope it will get to downloadmode or fastboot or whatever idknow cause i'm don't have the debrick.img file for F800L, looking for it right now, people say u can get that file from the phone (has same model) that still working, that all i know for now, if u found anyway to fix your phone please told me :highfive:
It has been repeated over and over and over "DO NOT FLASH ANYTHING THAT IS NOT MEANT FOR YOUR DEVICE" and also "FLASH AT YOUR OWN RISK". Both of them together makes it pretty clear that you shouldn't have flashed something that was meant only for the h918 into an f800l variant. Developers dont write this down as fancy words or for fun. They do it in order to let everybody know that if flashed, it could easily alter your system in such a way that it might never be fixed except by the company itself. By flashing something that wasnt meant for your device, you are trying to override the system with an image. And if the developer never made the source compatible with yours, then software and hardware will be contradicting each other. The motherboards of the phones comes for its specific variants and only developers can alter an image of a system to make it somewhat compatible with the variant.
Now, lets hope you get an answer to how to fix it because LG wont be fixing it for you since you voided your warranty by a) the simple fact of unlocking the bootloader (which is pretty easy to identify since it shows the warning sign when you turn the phone on), and b) you rooted the device. And LG wont work with neither of those. Unless.... and this is a maybe because i dont know if they would agree too (if you pay the sum they request to fix it, which i assure you it will be more that $100+ maybe even significantly more). Then they fix it for you.
I personally made a backup in a separated MIcro SD card i have outside the phone. So that if i have problems with my system, then i just insert that micro sd card and restore the backup.
Good luck!
If the phones screen is blank when you try to turn it on you bricked. Only fix is a replacement. There is NO debrick.img
oh my god, if u stop at the step KDZ tool found your device that H918, I can help you. Just boot to fastboot mode and fastboot the file name bootbackup.img and KDZ tool will found your device is F800L then KDZ normally. Sorry for my bad English.
gamza88 said:
Hello.
First, sorry for my bad english..
I got the F800L model and I rooted the device following the guide of Dirty Santa.
One day I read in forum that someone was able to flash H918 rom to the F800L device.
So I tried to do same.. but with the mistake of not backing up my original rom.
When I tried to flash the H918 rom through TWRP, it installed well, but when it booted, it just remained hanged in LG logo.
I just left it over a day waiting if it pass the LG logo. But it didn't.
Then I searched for the fix and read the guide about restoring the bricked device through LGUP and kdz file.
So I entered in download mode and connected to PC.
Executed LGUP software and my device appeared in H91810i model instead of F800L. I downloaded the F800L kdz file and tried to restore with LGUP but it appeared error saying kdz invalid.
So I managed to download the H918 10i kdz file and tried again to restore.. and WOW! it completed the process.
But.. Now my device is in worse condition. It doesn't even turn on.
Tried to enter again in download mode but nothing happens.. neither enters in fastboot mode...
Pulled out the battery and reinserted, and tried to turn on but nothing happens..
Can anybody help me please???
Click to expand...
Click to collapse
hi did you find any way to help ? i m in similar position
me2151 said:
If the phones screen is blank when you try to turn it on you bricked. Only fix is a replacement. There is NO debrick.img
Click to expand...
Click to collapse
Hello My Friend,
I have F800s and I rooted by your methos and did exactly the same thing as OP installed H918 rom through twrp. Now I can only go in download mode and LGUP reads my phone as H918 what should I do please help .

Bricked my MOTO G4 Plus (XT1642)

I bricked my MOTO G4. It's stuck on bootloop, so whenever I start recovery or the system, the moto logo turns on and off, non-stop. I tried the re-install official firmware process, and whatever I do, the error that says my phone's bootloader is unlocked and can't be trusted pops up. If I resolve it running the relock bat, the first problem, with the moto logo comes back. What do I do?
Here is the process that I tried: https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-hardbrick-solved-guide-t3657761
*I unlocked my bootloader a while back.
http://www.stechguide.com/download-stock-firmware-of-moto-g4-and-g4-plus/
make sure certain things .
1. make sure you have pc with drivers required properly.
2 . download correct firmware
3 . follow guide properly
Sent from my Moto G4 Plus using Tapatalk
parth00790 said:
http://www.stechguide.com/download-stock-firmware-of-moto-g4-and-g4-plus/
make sure certain things .
1. make sure you have pc with drivers required properly.
2 . download correct firmware
3 . follow guide properly
Sent from my Moto G4 Plus using Tapatalk
Click to expand...
Click to collapse
Thank you, I'll give this a try.
This is just a message for clarity - The "Your bootloader is unlocked and can't be trusted" is not an error message. It's informational.
It comes up on almost any phone with an unlocked bootloader and you don't need to worry about it. You can simply flash a new logo over it using TWRP (flash) or fastboot (fastboot flash logo <name_of_logo>).
Personally, I use the Google logo from the following link - https://forum.xda-developers.com/moto-g4-plus/themes/simple-bootlogos-collection-miui-apple-t3650738
Thanks to @ivan290
Hard Bricked Moto G4 Plus
I also had the same problem. But my issue is solved. XDA process of recovering hard brick phone is not correctly described. Mail me @ [email protected]
I will send you the links and files

Bootloop after Flash 5.1.1

Hello and good day,
I have my Moto X Play XT1563, I bought it in Mexico and I wanted to Downgrade from Nougath to Lollipop (was trying to test a sensor) unfortunately I always have problem to identify my firmware image so I guess I flash one that is not for my phone (hate motorola has tons of variants), now the phone is always in the unlocked bootloader warning screen and then reboots to the same screen.
This is the file I flash:
XT1563_LUX_RETLA_DS_5.1.1_LPD23.118-32_CFC_v2.xml
My phone is XT1563 Dual SIM
Im able to enter download mode, recovery mode etc but seems debug mode is disabled as my phone is not detected by my PC so I cannot flash again,
Has anybody any idea how to fix this as I try to figure out but have no clue.
Thanks.
Just re-flash with fastboot, will update if succeed.
Have to Flash again Nougat with this one LUX_RETLA_DS_7.1.1_NPD26.48-24-1_cid12_subsidy-DEFAULT_CFC.xml.
Please some admin close this thread.
Thanks!

Unbrick MOTO G4 [Athene]

Hello guys. I flashed the stock rom in my moto g4 but when i update it through motorola update service the phone totally died.
When i tried do flash using adb but my device dont get recognize. But the windows 10 recognize it and show as Android -> Motorola Device in driver manager options.
I have no bootloader and cant flash nothing. Someone can help me?
Here some pictures when i tried to enter fastboot or recovery mode. Always get in this screens.
Album : https://imgur.com/a/ZpMpdFR
I run into same problem today.
I have tried blank flash, and stuck at same screen as yours.
see my post here:
https://forum.xda-developers.com/showpost.php?p=76292701&postcount=628
wait for help!
my phone is rescued.
llaalways said:
I run into same problem today.
I have tried blank flash, and stuck at same screen as yours.
see my post here:
https://forum.xda-developers.com/showpost.php?p=76292701&postcount=628
wait for help!
Click to expand...
Click to collapse
tnagato said:
Hello guys. I flashed the stock rom in my moto g4 but when i update it through motorola update service the phone totally died.
When i tried do flash using adb but my device dont get recognize. But the windows 10 recognize it and show as Android -> Motorola Device in driver manager options.
I have no bootloader and cant flash nothing. Someone can help me?
Here some pictures when i tried to enter fastboot or recovery mode. Always get in this screens.
Album : https://imgur.com/a/ZpMpdFR
Click to expand...
Click to collapse
the first image said 'oem_locked', is that right? bootloader was locked, so you cannot flash via adb

Categories

Resources