Fire TV Cube Wont Play 4k On My 4k TV Help - Fire TV General

Bought HDMI cable that can do 4k and my tv is also 4k that got the specs for the cube to play at 4k but the fault is that when trying to click 4k settings it gose no singal and heads back to 1080P tried updating and changing settings but still wont work any advice

Related

[Q] Video is not showing up on my 1080i LG LCD TV.

Sorry that here might be a wrong area to post this thread, but as a newby, I don't have right to post in another section...
I am using an LG 1080i (max) LCD TV at home and when I connect my newly et OUYA to it , it shows nothing on the screen.
As far as I know, my LG tv supports 720p also, where all others gaming device of mine (Xbox360/PS3) work flawlessly with it.
I learnt from the support area that OUYA should support 1080P & 720P, and it will detect and change the setting automatically upon HDMI connection. I test my OUYA with another 1080p Sony TV and it works just fine, so it's not my OUYA got damaged.
I've tried the 720p mod too. It shows 720p signal on the sony tv but again no luck on the LG tv.
Can any of the professionals here might give me some hints on solving this so that I can start enjoying my OUYA experience?
There's no such thing as a 1080i LCD. Your TV is faking the 1080i output (or just accepting the input). It probably runs at 1360x768 or whatever that weird resolution is. I would assume your TV simply doesn't accept the true 720p signal, but I could be wrong. If you have an XBox 360 or PS3 (or a laptop) you could try connecting them and setting them to 1280x720 and see if it works.
brandogg said:
There's no such thing as a 1080i LCD. Your TV is faking the 1080i output (or just accepting the input). It probably runs at 1360x768 or whatever that weird resolution is. I would assume your TV simply doesn't accept the true 720p signal, but I could be wrong. If you have an XBox 360 or PS3 (or a laptop) you could try connecting them and setting them to 1280x720 and see if it works.
Click to expand...
Click to collapse
Type to force it to 1080p and hope your TV can cope. If not try to force it to 720p and see what happens. Most tv's that will do 1080i also will do 720p. I know mine does not report 1080p as an accepted mode because it was made before 1080p was on consumer electronics.
You force it via build.prop or the mod collection thing if you are not comfortable editing the build.prop.

[Q] Can't display 1080p?

Hi Everyone,
I just got a Nexus Player and connect to my TV.
Everything is good except the resolution stays on 720P.
My TV does support 1080P, since all other devices use 1080P resolution.
And Nexus Player should also support 1080P.
Does any one know if there is a way to manually setup the resolution on Nexus Player?
Thanks a lot.
skyshocker said:
Hi Everyone,
I just got a Nexus Player and connect to my TV.
Everything is good except the resolution stays on 720P.
My TV does support 1080P, since all other devices use 1080P resolution.
And Nexus Player should also support 1080P.
Does any one know if there is a way to manually setup the resolution on Nexus Player?
Thanks a lot.
Click to expand...
Click to collapse
The TV screen resolution will still stay at 720p, but the Nexus TV screen resolution should be 1080p ! Their is a way to verify this via the app Screen Specs found at the Google Play Store https://play.google.com/store/apps/details?id=com.MTMDevelopers.ScreenSpecs ! If you cannot get this app let me know. Another way to verify this is via the AnTuTu BenchMark app!
AndroidTVTech1 said:
The TV screen resolution will still stay at 720p, but the Nexus TV screen resolution should be 1080p ! Their is a way to verify this via the app Screen Specs found at the Google Play Store ! If you cannot get this app let me know. Another way to verify this is via the AnTuTu BenchMark app!
Click to expand...
Click to collapse
Hi, Thanks a lot for your reply.
However, if the TV screen shows the signal is 720p, that means nexus player sends 720 picture to the TV via HDMI, as a result, you will see a 720 picture, which I expect to see a 1080P picture.
I have no idea why these app shows 1080p in the system, but as long as it doesn't send 1080p to the TV via HDMI, we can't get 1080 quality, right?
If the TV is 1080, but received a 720 signal, that means it is not pixel to pixel picture, the picture is not clear.
Is there a way to force the player to send 1080P signal via HDMI? Will Root support this?
Thanks a lot.
skyshocker said:
Hi, Thanks a lot for your reply.
However, if the TV screen shows the signal is 720p, that means nexus player sends 720 picture to the TV via HDMI, as a result, you will see a 720 picture, which I expect to see a 1080P picture.
I have no idea why these app shows 1080p in the system, but as long as it doesn't send 1080p to the TV via HDMI, we can't get 1080 quality, right?
If the TV is 1080, but received a 720 signal, that means it is not pixel to pixel picture, the picture is not clear.
Is there a way to force the player to send 1080P signal via HDMI? Will Root support this?
Thanks a lot.
Click to expand...
Click to collapse
Everything you are saying is correct, but the Nexus TV Player will not override the built in 720p TV Screen resolution ... Yes, the Nexus TV Player is sending a 1080p signal to your 720p TV, the 1080p signal is being down graded to 720p ... In order for you to get full 1080p screen resolution from your Nexus TV Player, your TV will have to support 1080p screen resolution.
Now if your TV supports 1080i/1080p and you have a cable service, their is a way to go into the cable box to change the screen resolution. Any other way, it would have to be changed via the TV settings.
AndroidTVTech1 said:
Everything you are saying is correct, but the Nexus TV Player will not override the built in 720p TV Screen resolution ... Yes, the Nexus TV Player is sending a 1080p signal to your 720p TV, the 1080p signal is being down graded to 720p ... In order for you to get full 1080p screen resolution from your Nexus TV Player, your TV will have to support 1080p screen resolution.
Now if your TV supports 1080i/1080p and you have a cable service, their is a way to go into the cable box to change the screen resolution. Any other way, it would have to be changed via the TV settings.
Click to expand...
Click to collapse
Unless I'm mistaken you appear to be misunderstanding the original issue, his TV can support and other inputs work at 1080p with it, but for some reason he suspects that his Nexus is only outputting 720p, at least that is what his TV thinks its getting.
This appears to happen to other people also, without a decent resolution, hoping that M preview 3 will contain something positive.
https://productforums.google.com/forum/#!topic/nexus/7A-snuOEYis
I get the same issues. I purchased two Nexus players today, primarily for running Kodi.
The first of these is connected via a Home Theatre receiver to a 1080p TV and is displaying the Nexus Player content at 1080p.
I have a second home Theatre Receiver connected to a 1080p projector and is using the following resolutions:
[li]720p : Nexus Player running Android 5.1.1
[li]1080p : Apple TV 3
[li]1080p : Sony Bluray Player
I also tried swapping the inputs to the Home Theatre receiver to see if the output resolution changes from the Nexus Player. The Nexus Player is refusing to show the content at 1080p. There is also no way to force the output resolution. It certainly makes the viewing experience terrible for HD content on the Play store or via Kodi.
The Nexus Player and Android TV really needs work to improve settings available for manually configuring the output resolution.
Hi Guys - I'm also stuck at 720p output from my nexus player. Have there been any developments on unlocking 1080p?
Does anybody know if there is a fix to this? I just bought a nexus player and it is outputting 720p to my TV. I've searched at various websites and I couldn't find any solutions to this. Any input is appreciated. Thanks!!
I'm having the opposite issue.. hooked up to a cheap 720p TV and it outputs 1080, which the TV fails to convert properly, so I loose an inch or so of viewable screen on many apps (launcher seems OK?)
..found some posts that suggest "overscan calibrator" can fix this problem:
http://forum.xda-developers.com/attachment.php?attachmentid=3234854&d=1427641822
..It worked for my particular issue.
if someone cant answer this problem. I'm taken it back because the picture is horrible
same issue here ... running N preview
tried many hdmi cables
I can't even SEE a picture, because I cannot reset resolution from 1080 to 720 . And the many many many responses on xda have been deafening on this issue.
Is there ANY way to manually set resolution??????
Does any alternative ROM do this? Does the new developer preview? Can it be done with any 3rd party apps like overscan calibrator? Any sort of editor?

Recommended 4k or 2560x1440 monitor/TV I can mirrorlink my phone to easily

I know not all smart TVs have this option. Do I need to get a Samsung Smart TV? Right now I have a 55" 1080p samsung smart Tv but if I mirrorlink it the sides don't show because something from the QHD to 1080p conversion doesn't work right.
I have an old non smart TV (1920x1200) with an Amazon Firestick and Mirrorlink sees the firestick and I can mirrorlink through the firestick but it also doesn't show everything from my Tmobile Note 4 running Rapture ROM to the TV.
I'm looking for a TV or computer screen that will do a perfect mirrorlink from my note 4. I'd prefer a 4k that is known working with the note 4 as my next laptop will be 4k and I will use the tv/monitor as a 2nd monitor also.
Thanks
Does the rom have the build.prop edit to make mirrorlink work? Its to disable hdcp im pretty sure you can add it yourself

What is the best a/v receiver for the nvidia shield tv?

Hi there. I have the Nvidia Shield TV Pro and have been having trouble finding the right receiver.
First I purchased a Sony STRDH550 5.2 Channel 4K AV Receiver, and found out that it cannot handle 4K upscaling (which the Nvidia Shield TV does according to Sony) Technically it worked, but what would happen is the screen goes black then will show the input on tv. Almost like someone unplugs the HDMI and then reconnects. Best way I have thought of naming this is an HDMI Blink. It happens numerous (10 to 15 times) per day. So according to Sony this receiver was only 4K passthrough capable, which actually didn't even work, I had to connect shield directly to TV and use ARC for sound.
Second, I purchased an Onkyo Thank you-NR636 7.2 Ch -- which is advertised as 4K passthrough and 4K upscale capable. I still have the HDMI blink, but now it is not as often (2-3 times) per day.
The TV I'm using is a Vizio M50-C1 and is 4K HDMI 2.0 HDCP 2.2.
It has 4 30Hz HDMI ports and 1 60Hz HDMI port.
The only way I can get ULTRA 4K to play from Netflix is to connect it to the 60Hz port.
The other 30Hz ports are labeled 4K, and when connected will play with audio/video but will not broadcast in 4K. I do not understand this, so if anyone could shed some light that would be great. (I've tried every troubleshooting step I could think of) ie. unplugging all cables and plugging them back in sequence. After connection unplugging the power on the Shield TV and re plug. (Same with receiver and TV) I've tried other sources on the receiver and tried every HDMI port/input.
So I'm thinking of returning this Onkyo Receiver and purchasing a better/more expensive one. I would appreciate anyones feedback on their experience with the Nvidia Shield TV and 4K Receiver/TV.
Has anyone been able to get full 60Hz 4K and 720/1080 Upscaling from Receiver to TV to operate without any problems?
Are there any Receivers you could recommend to me that can handle this properly? Thanks for your help.
I cant answer your question directly as I haven't used 4k receivers, but have you considered that the HDMI cable could be faulty?
Unfortunately I already replaced both the HDMI cables with brand new gold plated HDMI 2.0 4K cables.
I might be able to shed some light.
Firstly it doesn't sound like your HDMI cable. There's actually no such thing as a HDMI 2.0 cable. It's the devices that are HDMI 2.0, and will work with any high speed HDMI cable.
Always plug a 4K device into a 60hz HDMI if possible. That way if any of the apps, or even the home screen want to run at 50hz or 60hz you won't experience a problem. Obviously if it's plugged into the 30hz port, the picture will disappear when the device outputs anything above 30hz.
You don't actually want your AVR to upscale your picture. Your 4K TV will do it automatically, and TV's generally do a better job than AVR's.
As for the HDMI blink, I'm not entirely sure (I've not actually plugged my shield into my 4K TV yet) it could be when the system switches resolutions, eg 4K to 1080p. The screen needs a little time to process the new source. My TV does that when my PC is hooked up, and I switch between a 4K desktop environment and a 1080p game.
If it's any help my AVR has no problem with any 4K material I've thrown at it. I use a Pioneer VSX 930.
The Shield TV, like all modern Nvidia devices, has a built in upscaler. No need for an external one and in fact, extra processing is likely to degrade gaming experience.
Using ARC is actually a good solution although that has the disadvantage of requiring the TV to be on just to listen to music.
martyn3000 said:
I might be able to shed some light.
Firstly it doesn't sound like your HDMI cable. There's actually no such thing as a HDMI 2.0 cable. It's the devices that are HDMI 2.0, and will work with any high speed HDMI cable.
Always plug a 4K device into a 60hz HDMI if possible. That way if any of the apps, or even the home screen want to run at 50hz or 60hz you won't experience a problem. Obviously if it's plugged into the 30hz port, the picture will disappear when the device outputs anything above 30hz.
You don't actually want your AVR to upscale your picture. Your 4K TV will do it automatically, and TV's generally do a better job than AVR's.
As for the HDMI blink, I'm not entirely sure (I've not actually plugged my shield into my 4K TV yet) it could be when the system switches resolutions, eg 4K to 1080p. The screen needs a little time to process the new source. My TV does that when my PC is hooked up, and I switch between a 4K desktop environment and a 1080p game.
If it's any help my AVR has no problem with any 4K material I've thrown at it. I use a Pioneer VSX 930.
Click to expand...
Click to collapse
Thank you for the information. It's actually really helpful. Those were all things I was wondering but not sure. Another question for you; I primarily use the shield remote and not the controller. If I have the shield connected to the receiver with pass through, and I try to adjust the volume with the shield remote it does not work. It says this app is set for surround sound please use the tv remote to adjust the volume. Is this normal? On my previous receiver that didn't happen. I could adjust the volume with the shield remote. Any thoughts?
NiHaoMike said:
The Shield TV, like all modern Nvidia devices, has a built in upscaler. No need for an external one and in fact, extra processing is likely to degrade gaming experience.
Using ARC is actually a good solution although that has the disadvantage of requiring the TV to be on just to listen to music.
Click to expand...
Click to collapse
The arc solution does work. I get 4K video etc. but it still has the HDMI blink when playing non 4K content. The only solution so far I have found us to use the 30hz input on the TV, which eliminates the HDMI blink. Then when I way to watch 4K content, switch it back to the 60hz port.
I haven't tried changing the Nvidia HDMI settings to use the (less than 60hz) option. I think it's 27hz or something like that.
Does the TV work fine with another 4K source like a PC? You might also want to try a shorter and/or different brand of HDMI cable.
I have t tried another source. I'm not even sure my PC does 4K. Would I need a 4K graphics card? I will definitive try a different cable. I had previously used a gold plated cable that was a few years old, and that's when I noticed the HDMI blink. So I purchased two new ones from Amazon. I'm pretty sure they are the right ones, but would like to reassure if anyone knows.
https://www.amazon.com/gp/product/B00NQ9OQU2/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
those should work, but if you are looking for a great AV receiver to use with this, I just bought a yamaha 2050, and everything works great!
http://www.amazon.com/Yamaha-RX-A2050-9-2-Channel-MusicCast-Bluetooth/dp/B00YMN6E7O
mikie00mike said:
Thank you for the information. It's actually really helpful. Those were all things I was wondering but not sure. Another question for you; I primarily use the shield remote and not the controller. If I have the shield connected to the receiver with pass through, and I try to adjust the volume with the shield remote it does not work. It says this app is set for surround sound please use the tv remote to adjust the volume. Is this normal? On my previous receiver that didn't happen. I could adjust the volume with the shield remote. Any thoughts?
Click to expand...
Click to collapse
HDMI control is a fickle beast. I find it works with some devices and not others. It could just be the combination of Shield and AVR you currently have.
I wouldn't be changing your AVR primarily on it's ability to function with your Shield though.
mikie00mike said:
I have t tried another source. I'm not even sure my PC does 4K. Would I need a 4K graphics card? I will definitive try a different cable. I had previously used a gold plated cable that was a few years old, and that's when I noticed the HDMI blink. So I purchased two new ones from Amazon. I'm pretty sure they are the right ones, but would like to reassure if anyone knows.
https://www.amazon.com/gp/product/B00NQ9OQU2/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Click to expand...
Click to collapse
If you have a 650 or above GPU (Kepler), it supports 4K output.
I have just overcome some 4k UHD issues with my Shield TV which are similar to the ones you described.
The main problem is HDCP 2.2....
This is what I found out.
Some time last year the HDCP standards were changed to require any 4K 60hz display to only accept a 4K 60hz UHD signal if it was wrapped in HDCP 2.2. Put simply - this means if any device in the connectivity chain is not HDCP 2.2 compatable you will not get a 4K 60hz UHD picture on your display.
For me this was a problem because my HDMI 4K UHD switch was not HDCP 2.2, and my LG 55EG960v refused the non-hdcp2.2 signal, so the shield TV would auto re-connect @ 1080p beacuse the connectivity chain was incompatible....
4K UHD Netflix requires HDCP 2.2, which is why it will only connect/work on the single HDMI input on your TV rated for 4k 60hz hdcp2.2...
The only way to guarantee a working 4K 60hz UHD signal is to ensure all your equipment is HDCP2.2 certified, or do some clever duplex routing.
Unitl this year HDCP2.2 equipment at reasonable prices was very scarce, but LIGAWO is a german manufactuer who seems to have just released a whole range of HDCP2.2 routers/switches/splitters etc (at reasonable consumer level prices).... I am sure there will be many more suppliers soon.
The rule of thumb I would use is - Unless the specification clearly states the device/equipment is HDCP2.2 compatable - don't go near it.....
I really, really hate DRM....
PS: It sounds like may not need to replace your expensive AV reciever, and what you want to achieve could be done through duplex routing. Happy to have a PM discussion if that would help. I currently run 5 consoles, 1 STB, 1Shield TV, 1 PC, and Chromecast audio, all with a Yamaha DSP Soundbar/Reciever (which is only HDMI 1.4 compatable), into 1 TV, and still can get 4k UHD 60hz + 7.1 HD audio.... So it can be done without replacing your AV reciever.
THIS IS AWESOME!! Thanks so much for this. Would you mind if I PM you later tonight when I get home from work? So would I also need a new router? Right now I have an Asus RTAC66U dual band. I also have a WD My Cloud EX4 that I stream videos from, would that need to be replaced also? I will PM you later if ok. Thanks again.
MintyTrebor said:
I have just overcome some 4k UHD issues with my Shield TV which are similar to the ones you described.
The main problem is HDCP 2.2....
This is what I found out.
Some time last year the HDCP standards were changed to require any 4K 60hz display to only accept a 4K 60hz UHD signal if it was wrapped in HDCP 2.2. Put simply - this means if any device in the connectivity chain is not HDCP 2.2 compatable you will not get a 4K 60hz UHD picture on your display.
For me this was a problem because my HDMI 4K UHD switch was not HDCP 2.2, and my LG 55EG960v refused the non-hdcp2.2 signal, so the shield TV would auto re-connect @ 1080p beacuse the connectivity chain was incompatible....
4K UHD Netflix requires HDCP 2.2, which is why it will only connect/work on the single HDMI input on your TV rated for 4k 60hz hdcp2.2...
The only way to guarantee a working 4K 60hz UHD signal is to ensure all your equipment is HDCP2.2 certified, or do some clever duplex routing.
Unitl this year HDCP2.2 equipment at reasonable prices was very scarce, but LIGAWO is a german manufactuer who seems to have just released a whole range of HDCP2.2 routers/switches/splitters etc (at reasonable consumer level prices).... I am sure there will be many more suppliers soon.
The rule of thumb I would use is - Unless the specification clearly states the device/equipment is HDCP2.2 compatable - don't go near it.....
I really, really hate DRM....
PS: It sounds like may not need to replace your expensive AV reciever, and what you want to achieve could be done through duplex routing. Happy to have a PM discussion if that would help. I currently run 5 consoles, 1 STB, 1Shield TV, 1 PC, and Chromecast audio, all with a Yamaha DSP Soundbar/Reciever (which is only HDMI 1.4 compatable), into 1 TV, and still can get 4k UHD 60hz + 7.1 HD audio.... So it can be done without replacing your AV reciever.
Click to expand...
Click to collapse
So does this mean 650 or above GPU is for the receiver or media player? When you say 650 does that handle 4K passthrough, as well as full 4K upscaling from 480/720/1080p content?
NiHaoMike said:
If you have a 650 or above GPU (Kepler), it supports 4K output.
Click to expand...
Click to collapse
In the PC you're using as a source, to rule out the Shield as the problem. And yes, any Kepler or newer GPU (including the one built into the Shield) will upscale all the way to 4K, although the smaller ones won't be able to handle the most advanced algorithms. But unless you're a hardcore videophile, you'll be hard pressed to tell the difference between how well a high end GPU upscales as opposed to how well a smaller GPU upscales. Not surprising given that image scaling is just one of the most fundamental parts of 3D rendering.
mikie00mike said:
THIS IS AWESOME!! Thanks so much for this. Would you mind if I PM you later tonight when I get home from work? So would I also need a new router? Right now I have an Asus RTAC66U dual band. I also have a WD My Cloud EX4 that I stream videos from, would that need to be replaced also? I will PM you later if ok. Thanks again.
Click to expand...
Click to collapse
I pm'd you some stuff.
Minty or Mike may I get a copy also please?
Minty I PMd you
Thanks!
mikie00mike said:
THIS IS AWESOME!! Thanks so much for this. Would you mind if I PM you later tonight when I get home from work? So would I also need a new router? Right now I have an Asus RTAC66U dual band. I also have a WD My Cloud EX4 that I stream videos from, would that need to be replaced also? I will PM you later if ok. Thanks again.
Click to expand...
Click to collapse
thruster999 said:
Minty or Mike may I get a copy also please?
Minty I PMd you
Thanks!
Click to expand...
Click to collapse
I have updated my config since I sent the details last, but I still duplex (or send multiple signals of the same HDMI source) to bypass the HDCP restrictions so I can continue to use my older soundbar. Picture with notes attached. Shout if you need anything more.

Problem with resolution and frame rate

Hello guys. Yesterday I got my Nvidia Shield TV 16GB from Amazon and I tried to configure and play some online TVs and videos. The problem is that the picture is not as smooth as it was with my previous Android box - I think it is connected with the resolution and change of the refresh rate when playing the channels. My TV is Panasonic ST50. In the settings menu of the Shield I have set the resolution to 1080p at 60 Hz. I have tried to play some videos in Kodi too (I have activated the option Adjust display refresh rate). With these settings when starting a video or a channel the refresh rate switches to 50 Hz but the picture is not smooth, with judder, with obvious problems when watching sports.
Any ideas how to solve the problem?
Is the video your are testign with 50hz? DO you know your tv can handle a 50hz?
what happens when you play a 24hz or 60hz file? (BR)
My tv does 324, 30, 50, and 60. If I feed it a 50hz video it forxes the tv to 60. Its not jittery, but does look slightly odd.
Try playing it in Kodi, without the adjust framerate setting, and see how it plays.
ARe you feeding the hdmi via a audio receiver?
docluv01 said:
Is the video your are testign with 50hz? DO you know your tv can handle a 50hz?
what happens when you play a 24hz or 60hz file? (BR)
My tv does 324, 30, 50, and 60. If I feed it a 50hz video it forxes the tv to 60. Its not jittery, but does look slightly odd.
Try playing it in Kodi, without the adjust framerate setting, and see how it plays.
ARe you feeding the hdmi via a audio receiver?
Click to expand...
Click to collapse
I am testing with 25Hz and 50 Hz video. My TV can handle 50 Hz. I have a proof that the TV is fine - I have Minix Android box too and everything is perfect when playing the same videos with the Minix on my TV.
I have tried both options - on and of, for the adjust framerate setting - no difference in the result.
I don't use audio receiver.
I fell I have tested everything and still the problem is there.
cskarev said:
I am testing with 25Hz and 50 Hz video. My TV can handle 50 Hz. I have a proof that the TV is fine - I have Minix Android box too and everything is perfect when playing the same videos with the Minix on my TV.
I have tried both options - on and of, for the adjust framerate setting - no difference in the result.
I don't use audio receiver.
I fell I have tested everything and still the problem is there.
Click to expand...
Click to collapse
ahh, sorry man....thats odd.
docluv01 said:
ahh, sorry man....thats odd.
Click to expand...
Click to collapse
Thank you! I saw a thread in the Nvidia Shield Forum about users experiencing problems with deinterlacing, so maybe I am just one of those users. Obviously I will have to wait for another update or reaction from Nvidia
Hi,
I used to have this jitter problem with firmware 3.2. I had jitters on all video players except Kodi. And also on game stream.
I fixed the video jitters by downgrading the firmware to 3.1. But unfortunately the game stream jitters still there.
You can try to downgrade. But you need to unlock bootloader which will break your warranty.
zizicici said:
Hi,
I used to have this jitter problem with firmware 3.2. I had jitters on all video players except Kodi. And also on game stream.
I fixed the video jitters by downgrading the firmware to 3.1. But unfortunately the game stream jitters still there.
You can try to downgrade. But you need to unlock bootloader which will break your warranty.
Click to expand...
Click to collapse
Thank you, zizicici. Downgrading will be my final solution if not else helps. For now, I don't want to break the warranty of the device. But if there is no other solution (or no update from Nvidia soon) probably I will proceed.

Categories

Resources