I am looking for the newest stock software version for the H870 with andoid Pie. I only found the old 20J version from Oreo.
It's best with Magisk right away because I can't root this 20J, bootloop is done.
I found
[ROM][Stock] LG-H870 OPEN EU 30B ROM
NFO: • Only LG G6 H870 is supported • Make Backups before use Features: • Made from official LGH870AT-V30b-EUR-XX-NOV-05-2019+0.up • Pre-rooted - Removed RCTD - Removed DM-Verity - Removed ForceEncrypt Requirements: • Unlocked Bootloader •...
forum.xda-developers.com
Old magisk work.
Related
The Magisk Universal Systemless Interface by XDA Recognized Developer @topjohnwu has received an update that bumps it up to version 7. There are a bunch of notable changes that follow in the changelog:
Fully open source
Remove supolicy dependency, use my own sepolicy-injection
Run everything in its own selinux domain, should fix all selinux issues
Add Note 7 stock kernel hex patches
Add support to install Magisk in Manager
Add support for image merging for module flashing in Manager
Add root helpers for SuperSU auto module-ize and auto upgrading legacy phh superuser
New paths to toggle busybox, and support all root solutions
Remove root management API; both SuperSU and phh has their own superior solutions
Downloads:
1)Official MM OOS STOCK 3.1.3 - https://s3.amazonaws.com/oxygenos.o...OTA_018_all_201609291837_741146bcf28e4587.zip
2)Official MM H2OS Stock 2.0 - http://download.h2os.com/oneplus_x/mp/OnePlusH2OS_14_OTA_001_all_201609270726_5aa42273def7431b.zip
3) Use this recovery to Flash Magisk (TWRP by Bluespark) - http://forum.xda-developers.com/devdb/project/dl/?id=20236
4)Magisk Manager.apk - http://forum.xda-developers.com/attachment.php?attachmentid=3893660&d=1475527472
5)Latest Magisk Zip File - http://forum.xda-developers.com/attachment.php?attachmentid=3893659&d=1475527472
6)Systemless Superuser (use this Systemless superuser) - http://forum.xda-developers.com/apps/magisk/magisk-phh-s-superuser-android-pay-t3435921
7)Magisk Uninstaller (if anything goes wrong) - http://forum.xda-developers.com/attachment.php?attachmentid=3893658&d=1475527472
Before Flashing:
1) If you are already on MM with stock recovery and no root,then wipe your data and cache,flash full MM rom pack, flash provided TWRP and follow the instruction below
2)If you are in MM with rooted system,do wipe data and cache,flash full rom pack, flash twrp and follow the instruction
MOST IMPORTANT:
BEFORE FLASHING MAGISK,YOU NEED TO HAVE UNMODIFIED SYSTEM
USE TWRP TO FLASH MAGISK
FLASHING INSTRUCTION:
1)Flash your rom pack
2)Flash magisk zip file
3)Flash systemless root
4)Flash systemless xposed
Ooh laa... Got unmodified system with root access
what is this used for?
meraj99 said:
what is this used for?
Click to expand...
Click to collapse
Systemless Benefits
OTA:
The system partition will not be modified or mount r/w, thus your Android devices are capable of applying OTA updates even if ur mobile s rooted
Safety Net:
Android Pay is confirmed working!
Note: THIS WILL NOT WORK WITH SYSTEMLESS XPOSED, YOU MUST USE THE CLASSIC VERSION!
Configuration tested on:
Redmi Note 3 Kenzo 3gb goodix variant.
Officially unlocked bootloader.
Installed latest global dev rom (7.7.20) with miflash in edl mode then installed TWRP official 3.1.1-0 then installed 7.7.6 firmware from LineageOS 14.1 thread.
Latest LineageOS build (2/8/17) with Radon Kernel 5.3.
Steps:
1. Install latest global dev rom to make sure you have the proper nougat binary blobs on your device. Preferable to use miflash and phone in edl mode. Allow phone to boot one time so rom can partition the emmc properly.
2. Install latest TWRP official (3.1.1-0) by putting phone in bootloader mode and connecting to PC via usb cable. Copy the twrp recovery image to the same place that fastboot.exe is located. Open an elevated/admin command prompt and navigate to where fastboot.exe is located. Type "fastboot flash recovery NameOfRecovery.img" (without quotes of course). When that is finished type "fastboot boot NameOfRecovery.img."
3. Install zips in this order. LineageOS rom, OpenGapps, Radon Kernel 5.3 (selected all default settings), Magisk 13.3.
4. Reboot to system, set up phone and install any apps that need to pass cts safety net at this point. E.G. Super Mario Run.
5. Reboot to recovery.
6. Install the latest Xposed build for SDK25 ARM64 from PurifyOS Xposed thread - https://forum.xda-developers.com/xposed/xposed-android-nougat-sdk-25-arm64-t3639221. DO NOT USE THE SYSTEMLESS MAGISK VERSION.
7. Reboot to system.
8. Install latest Xposed Material installer by DVDAndroid - https://forum.xda-developers.com/xposed/material-design-xposed-installer-t3137758. At this point you will fail safety net. The next step will fix that.
9. Install Root Switch 1.3.3.2 apk.
10. When you need to pass CTS Safety Net use Root Switch to disable Xposed. It will ask you confirmation to perform a soft reboot. After the soft reboot Xposed will be disabled and you will be able to pass CTS Safety net again. DO NOT USE THE DISABLE ROOT SWITCH! THIS WILL PERMANENTLY MESS UP MAGISK!
THIS HAS ONLY BEEN TESTED ON THE LISTED CONFIGURATION. DO NOT ASK IF IT WORKS ON ANY OTHER CONFIGURATION, TEST IT YOURSELF. I WILL NOT BE RESPONDING TO QUERIES, IF YOU FOLLOW THE STEPS AS LISTED YOU WILL BE JUST FINE.
Linn for root switch
tried this on rr rom redmi note 3 kenzo working absolutely fine highly recommend
Works on One Plus 3T with Oxygen OS 4.1.6!
Thanks!
If the root switch app disables xposed, then what is the use of it
I can't able to flash xposed zip file via TWRP for oreo 8.1 so i used this magisk method and its working on 8.1 aosp rom.
Recognized Contributor @topjohnwu has modified the*Xposed*Framework (V.85.1) to work alongside Chainfire's*systemless*SuperSU in order to also run without modifying the*system*partition. This means that you can install*Xposed*modules on a rooted device running the stock ROM and continue to receive OTAs
And can pass safety net check so u can use any root app which interfere in system.
Video guide:
https://youtu.be/4mW16FJjCPU
Requirements :
1)MAGISK ROOT
2)SOME FLASHING KNOWLEDGE (for installing magisk only)
DOWNLOAD AND FLASH MAGISK v16 IN TWRP AND INSTALL MAGISK MANAGER APP 5.6.2
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445#login
AND FOLLOW ALL STEPS IN VIDEO
KEEP NANDROID BACKUP IF ANY CASE DEVICE DOESN'T BOOT
Working XPOSED modules list for OREO
https://forum.xda-developers.com/xposed/xposed-modules-oreo-t3732819
Hi all,
I once tried to update my rooted onePlus 5 (Magisk) to the latest oxygen os version, and lost everything. (with a corrupted Nandroid backup haha)
Since then, I've been pretty careful not to update anything, OTA isn't working anyway.
But now is about time to update it all.
I have flashfire, and Oxygen Updater (currently downloading OOS 5.1.4)
My question, before I go any further is:
If I download ALL the updates on Oxygen Updater and then flash them with flashfire (flash ZIP & OTA --> Select downloaded firmware --> proceed), I should be able to gradually flash all the new update until OOS 9.0.2, Keep root, and more importantly, Keep ALL my data, apps and all.
Is that correct? Does anyone have a proper flashfire walkthrough?
I'm a bit hesitant as someone seems to have had issues with Magisk as per below source's comment
source: https://forums.oneplus.com/threads/...with-flashfire-bonus-tip-oneplus-3-3t.621501/
Thanks!
To upgrade from Oreo non-treble to latest
- From TWRP, flash OxygenOS 5.1.4, Magisk and all the other mods and boot up once (to create vendor partition)
- From TWRP, flash OxygenOS 9.0.8, Magisk, all the other mods and a Pie-capable TWRP
PierreVicquery02 said:
To upgrade from Oreo non-treble to latest
- From TWRP, flash OxygenOS 5.1.4, Magisk and all the other mods and boot up once (to create vendor partition)
- From TWRP, flash OxygenOS 9.0.8, Magisk, all the other mods and a Pie-capable TWRP
Click to expand...
Click to collapse
And that will NOT erase any of my data?
Is it not possible to do it with flashfire? I don't have TWRP anymore I think..
Thanks!
mattou78400 said:
And that will NOT erase any of my data?
Is it not possible to do it with flashfire? I don't have TWRP anymore I think..
Thanks!
Click to expand...
Click to collapse
I actually don't know what flashfire is.
You will not lose data in theory, but it's a good thing to make a backup
on my opinion realmi UI works slowly and consume more power than ColorOS (especially C26 version), so I decided to get back on ColorOS.
Due to that it's impossible to use google pay on device with unlocked bootloader you will need:
1) magisk ver. 20.3 (you can download it it here - https://forum.xda-developers.com/realme-x2-pro/how-to/guide-unlocking-bootloader-to-getting-t4010189 I download from attachment
2) magiskfix_v1_realme_wzsx150 (1).zip - I've attached it.
3) Safetynet_fix_new.zip - you can download it from these link: https://forum.xda-developers.com/apps/magisk/xiaomi-safetynet-fix-t3600431
so First of all:
1. Flash Magisk v. 20.3
2. Boot to custom recovery (I use orange fox) and flash magiskfix_v1_realme_wzsx150 (1).zip
3. Boot to custom recovery and flash Safetynet_fix_new.zip
enjoy fully workable google pay, and magisk (cuz without these fixs magisk hide didn't work)
Or just...
1. Install Magisk
2. Download Magisk Props Hider and Magisk ARCore Playground from the Magisk Manager app
3. Restart
4. You pass SafetyNet
Does this work on Realme UI with c26 installed?
I currently just have an Unlocked bootloader with the original recovery and no magisk installed.
Can I just install Magisk and proceed further with it?
When I tried flashing Magisk decoded zip previously, it resulted in bootloops which required me to reinstall everything and lost my data in the process. (this was when I flashed c24 on to c10 versions)
raxeffect said:
Does this work on Realme UI with c26 installed?
I currently just have an Unlocked bootloader with the original recovery and no magisk installed.
Can I just install Magisk and proceed further with it?
When I tried flashing Magisk decoded zip previously, it resulted in bootloops which required me to reinstall everything and lost my data in the process. (this was when I flashed c24 on to c10 versions)
Click to expand...
Click to collapse
you have to install custom recovery (orange fox), than flash magisk in custom recovery, than flash patched vbmeta.img in fastboot mode.
than you can reboot to system!
orange fox and patched vbmeta.img and instructions how to flash you can find here https://forum.xda-developers.com/realme-x2-pro/development/orangefox-recovery-x2-pro-t4063301and
Does this play havoc with the fingerprint scanner, btw? There was this problem with rooting on Realme UI
raxeffect said:
Does this play havoc with the fingerprint scanner, btw? There was this problem with rooting on Realme UI
Click to expand...
Click to collapse
as far as I know, fingerprint scanner still doesn't work on rooted realme UI.
Helg1002 said:
as far as I know, fingerprint scanner still doesn't work on rooted realme UI.
Click to expand...
Click to collapse
BUMP
Any updates on this? I'm thinking to switch to this from older k20 pro but finding info to be sparse on it.
nakulp said:
BUMP
Any updates on this? I'm thinking to switch to this from older k20 pro but finding info to be sparse on it.
Click to expand...
Click to collapse
It is working