I updated my S10 Plus to the first Android 11 with Odin... my original firmware is HTS (3 Sweden) but I used NEE. When the second Android 11 came out I did the same thing... success!
I asked in the forum if I will get OTA in the future and I got the answer YES. What version will I get then? NEE or HTS? Before my update the version said NEE, NEE, NEE... Now it says XEF/NEE, XEF/HTS
Ideas?
No one?
Now the firmware for my phone is released (Sweden Three HTS) has been released on Sammobile.
Do I benefit anything from flashing it? I have NEE today...
Related
I have galaxy s4 i9505 and after region changing my csc is ALB, i can't get updates. What can i do? It is multi-csc... Region SEB, but CSC ALB.
So I will not get updates?
Hi
I had the same problem, I don't know why it happens.
I also have GT-I9505 and at first I had mismatch of PDA and CSC, my PDA was ME2 and CSC was BTU so Kies told me it doesn't support my firmware and thus I couldn't get updates. That was on android 4.2.2.
Then I installed the DBT (android 4.3) stock rom of Germany but when I entered Kies the CSC was still BTU and didn't change even after a factory reset so again I couldn't get updates, not via Kies nor OTA. Afterwards, I installed at last the BTU stock rom and everything was OK.
The Kies no longer told me that my firmware is unsupported and I received the MK8 update a week ago and gonna receive the new update which was released yesterday in a few days. Moreover, I forgot to mention that the Knox flag wasn't tripped after installing the BTU rom.
My suggestion is you install the rom which matches the CSC of your device because the CSC doesn't change after installing a stock rom so you have to adapt yourself to the CSC.
Meyhemg said:
Hi
I had the same problem, I don't know why it happens.
I also have GT-I9505 and at first I had mismatch of PDA and CSC, my PDA was ME2 and CSC was BTU so Kies told me it doesn't support my firmware and thus I couldn't get updates. That was on android 4.2.2.
Then I installed the DBT (android 4.3) stock rom of Germany but when I entered Kies the CSC was still BTU and didn't change even after a factory reset so again I couldn't get updates, not via Kies nor OTA. Afterwards, I installed at last the BTU stock rom and everything was OK.
The Kies no longer told me that my firmware is unsupported and I received the MK8 update a week ago and gonna receive the new update which was released yesterday in a few days. Moreover, I forgot to mention that the Knox flag wasn't tripped after installing the BTU rom.
My suggestion is you install the rom which matches the CSC of your device because the CSC doesn't change after installing a stock rom so you have to adapt yourself to the CSC.
Click to expand...
Click to collapse
My CSC now is ALB, and i can't find this rom on samsung-updates.com
Before that the CSC was different?
Meyhemg said:
Before that the CSC was different?
Click to expand...
Click to collapse
Before was DTM
Vartotojas258 said:
Before was DTM
Click to expand...
Click to collapse
DTM is of Germany T-Mobile. Where are you from?
You had the German T-Mobile before and moved to SEB (Serbia) rom?
Meyhemg said:
DTM is of Germany T-Mobile. Where are you from?
You had the German T-Mobile before and moved to SEB (Serbia) rom?
Click to expand...
Click to collapse
I'm from lithuania, but when buy the phone csc was dtm.
Vartotojas258 said:
I'm from lithuania, but when buy the phone csc was dtm.
Click to expand...
Click to collapse
You can try flashing (via Odin) the new update which was released two days ago (MKE).
It was released for Germany and France for now but soon will be rolling to everyone.
I'm almost sure it won't trip the Knox flag if you do everything right.
Download here: http://www.sammobile.com/firmwares/3/?download=22443
Meyhemg said:
You can try flashing (via Odin) the new update which was released two days ago (MKE).
It was released for Germany and France for now but soon will be rolling to everyone.
I'm almost sure it won't trip the Knox flag if you do everything right.
Download here: http://www.sammobile.com/firmwares/3/?download=22443
Click to expand...
Click to collapse
If i wait for SEB region update and when i flash it csc will change? I think to wait for kitkat and then flash it.
Vartotojas258 said:
If i wait for SEB region update and when i flash it csc will change? I think to wait for kitkat and then flash it.
Click to expand...
Click to collapse
Yeah that's an option also.
Also, did you try factory reset after the installation? If not, do it. It sometimes helps, in my case it didn't help to change the CSC to DBT when I installed the German rom.
I hope Kitkat will arrive soon to our devices. I can't wait to see the improvements and how did they change the TW.
hi
I had problems during reflash n9005 before.
i had version N9005XXUFNG2 and wanted to update to Poland XEO version N9005XXUEND3. Somebody reply me i can use it and i almost kill my note3 during flash.
Then somebody explain i cant downgrade from NG2 to ND3 so i reflash back to correct version and let i to wait.
question 1:
my current firmware is N9005XXUGNG1_N9005ATOGNG1_N9005XXUGNG1_HOME.tar.md5, phone is probably from Austria A1 network (i bought it in local store with papers)
now there is update to android 5.0. Of course i got info and tried to update phone via wifi but after it download firmware (over 810mb) during recovery flash it end at 29% with ERROR message than suggest to use KIES so can i now use POLAND XEO firmware:
Code:
Model SM-N9005
Model name GALAXY Note 3 LTE
Country Poland
Version Android 5.0
Changelist 3643614
Build date Wed, 25 Feb 2015 12:57:23 +0000
Product code XEO
PDA N9005XXUGBOB6
CSC N9005XEOGBOA4
links are here:
Code:
http://www.sammobile.com/firmwares/download/43864/N9005XXUGBOB6_N9005XEOGBOA4_XEO/
http://www.sammobile.com/firmwares/download/43186/N9005XXUGBOA5_N9005XEOGBOA4_XEO/
if YES, which file should i use B6 or A5 (i think B6 but update from Austria A1 for n9005 is A5)?
question 2:
my second N9005 is problably from Ireland Meteor still with 4.4.2 currect: N9005XXUENC2_N9005METENB1_N9005XXUENC2_HOME.tar.md5
Can i now update to 5.0 Poland XEO from same upper links version B6 or A5 ?
1 yes
2 yes
BOB6
Hi,
I'm in Qatar and I've SM-N9005 with Baseband N9005XXUGNG1. Can I flash official update firmware from other countries like Saudi Arabia with firmware N9005XXUGBOEA?
I would really appreciate if someone could give me link to some kind of tutorial on reading firmware compatibility issues.
Regards
alighilzai said:
Hi,
I'm in Qatar and I've SM-N9005 with Baseband N9005XXUGNG1. Can I flash official update firmware from other countries like Saudi Arabia with firmware N9005XXUGBOEA?
I would really appreciate if someone could give me link to some kind of tutorial on reading firmware compatibility issues.
Regards
Click to expand...
Click to collapse
I have been trying to find an answer to this for a long while, but I just can't. There are some ROMs which are meant for 32 GB devices, and then there are some ROMs which are meant for 16 GB devices. If you download a ROM which is meant for 16 GB Note 3, then obviously you won't be able to flash it on a 32 GB Note 3. And the firmwares listed on sammobile.com don't say which are which!
So I have given up, when a new base pops up, I simply head over to the Alexandar's topic to see whether he has complied the newer version or not, and he does that so fast. That is as stock as a ROM can get, other than ROMs from sammobile.com, so I don't really bother any more.
I have an unrooted SM-N910G purchased directly from Samsung in Singapore
The last update I received was 5.0.1
N910GDTU1BOC7
3.10.40-5042088
Build LRX22C_N910GDTU1BOF1
I heard that newer versions would be rolled-out, but whenever i have the system check,
it tells me this is the last upgrade.
can someone tell me whether I am doing something wrong?
The roll out for Marshmallow has just recently begun. Some countries have received the update for Marshmallow eariler than some. The speed of the firmware update release depends on where you purchased your device. I am still waiting for the OTA Marshmallow firmware update for my UAE N910C. Just be patient, I'm sure you will get it soon.
No matter what Singapore CSC is selected, all of them got the latest 5.1.1 update in december, 2015:
XSP, MM1
sejtam said:
I have an unrooted SM-N910G purchased directly from Samsung in Singapore
The last update I received was 5.0.1
N910GDTU1BOC7
3.10.40-5042088
Build LRX22C_N910GDTU1BOF1
I heard that newer versions would be rolled-out, but whenever i have the system check,
it tells me this is the last upgrade.
can someone tell me whether I am doing something wrong?
Click to expand...
Click to collapse
Download Phone info app,check ur CSC and download FW from sammobile(or live.samsung-updates)..Than flash via ODIN and u done
Njoy
Has anyone got the 7.x update in the UK for their s7? I still don't
Version info. I'm still a noob to samsung
There's a couple of threads talking about this. You have to manually flash BTU firmware using odin then it'll let you update it to nougat in system update OTA.
Download the UK BTU firmware from sammobile.
https://forum.xda-developers.com/galaxy-s7/how-to/samsung-s7-nougat-final-ota-t3532213
I have a german (DBT) Samsung Galaxy S7 Edge.
I flashed Nougat Beta 1 with Odin. CSC is atm G935FOXA1ZPK4
What is the best way to update to the final, if possible with keeping data?
I'm assuming you have no intentions to trip knox since you're only on beta 1, so custom flashing appears to be out of question.
You can flash via Odin one of two available official firmwares (BTU and O2C) at the time of this posting (note that this may break CSC features since your original is DBT) or wait out for official DBT release. Official firmwares can be checked on Sammobile.
Using Home_CSC in Odin would not wipe your data, however, that may mean you would have to wait for official DBT firmware to be on the correct CSC.
Last but not least, you can roll back to MM and wait for official OTA updates from your carrier. Its pretty much a waiting game on the official route.
I originally was on DBT, my CSC changed when i flashed Beta 1 BTU, because Beta 1 was also not available as DBT. After flashing Beta 1 my CSC showed OXA (see screenshot above).
In the meantime i flashed final BTU with Home_CSC. My CSC is now shown as G935FOXA1DPLT.
I will switch back to DBT, when final DBT is available. Is there a way to change to DBT without erasing data? I guess not.
Bierfreund said:
I originally was on DBT, my CSC changed when i flashed Beta 1 BTU, because Beta 1 was also not available as DBT. After flashing Beta 1 my CSC showed OXA (see screenshot above).
In the meantime i flashed final BTU with Home_CSC. My CSC is now shown as G935FOXA1DPLT.
I will switch back to DBT, when final DBT is available. Is there a way to change to DBT without erasing data? I guess not.
Click to expand...
Click to collapse
As long as you use Home_CSC you shouldn't lose data, so hopefully it'll be included later in the final DBT firmware.