Database Users

[Guide] V4A Errors Fix - The Ultimate Guide

Welcome Guys!!!​
Whats this for?:-
Many users face issues while installing V4A drivers on their device. Here is the ultimate fix for it.
Requirements:-
1. Root explorer like ES File Explorer.
2. The flashable zip of V4A.
3. Some knowledge about flashing, modifying system directory.
Procedure:-
1. Install busybox and make sure device is rooted properly.
2. Go to System > Vendor > Etc and check for the file named audio_effects.conf and copy it and paste it to System > etc (Overwrite).
3. (Not compulsory but do it if it doesn't work) Rename the System > Vendor > Etc > audio_effects.conf to audio_effects.conf.bak
4. Now flash the V4A zip in recovery and Voila!!
Please Hit Thanks If I Helped ​

How to add effects .irs files.

isas123 said:
How to add effects .irs files.
Click to expand...
Click to collapse
Pls google all that stuff. No off topic here.

Devam03 said:
Voila!!
Click to expand...
Click to collapse
thanks a bunch!
works like a charm (after few other unsuccessul methods)
latest miui.eu 7.2.24_v8-6.0 (kenzo)
ViperFX_2.5.0.5_by_guitardedhero
valuable post :good:

crullick said:
thanks a bunch!
works like a charm (after few other unsuccessul methods)
latest miui.eu 7.2.24_v8-6.0 (kenzo)
ViperFX_2.5.0.5_by_guitardedhero
valuable post :good:
Click to expand...
Click to collapse
Your welcome. Please hit thanks if I helped!

i still stuck at instal driver, it says i need to instal latest busybox

aldichuy said:
i still stuck at instal driver, it says i need to instal latest busybox
Click to expand...
Click to collapse
Did u install busybox?

Devam03 said:
Did u install busybox?
Click to expand...
Click to collapse
yes i have
edit: i just uninstal both and reinstall viper first and then the busybox, i did soft restart the phone before instal viper driver, and works

4. Now flash the V4A zip in recovery and Voila!!
Where is the V4A zip. I downloade zip from official site but ita just an apk file ???

nice effort

c_/\/\_k said:
nice effort
Click to expand...
Click to collapse
Thx. Hit the thanks button if i helped.

[OFFICIAL][PATCHER][APP] Dual Boot Patcher For Redmi 4x

Finally Builded Dual Boot Patcher For Redmi 4x With All Fixes.
Now DBP is official for Redmi 4x
Note:- Redmi 4x/4(India) both are same.
Note:-I AM NOT RESPONSIBLE IF ANYTHING HAPPENS TO YOUR DEVICE.USE AT YOUR OWN RISK.THIS IS PERSONALLY TESTED BY ME SO IT SHOULD NOT CREATE ANY PROBLEM IF YOU FOLLOW THE STEPS ABOVE PROPERLY
ENJOY
The Requirement:
1- TWRP Latest[Recommended] ==> TWRP For Santoni
2- Decrypted Data ==> (Format Data)(Important Step or Else Rom will not boot and it will wipe internal storage so take a backup)
3- Magisk or Supersu (I used Magisk)
The Installation Steps:
1- Install the latest DBP from here ==> Dual Boot Patcher
(As this build is debug it will create another app name 'Leaks' so dont uninstall it will also uninstall DBP app)
2- Go to Settings ==>Installed apps==>All==>Documents==>Enable
3- Go to app and click on ROMs and grant it a root access.
4- Click yes to update the "Primary Kernel"
5- Go to "Patch Zip File"
6- Click on "Add flashable zip"
7- Choose the required ROM such as "YurekaOS"
8- Click "OPEN"
9- Under partition configuration choose "Data slot/Ext slot/secondary(if have enough space)"
10- Enter and ID as "Yureka or any name you like"
11- Click on "Continue"
12- Click on "SAVE"
13- Click on "Right Mark" to patch the zip file
14- Wait till the operation to finish
15- Go to "ROMs"
16- Click on "Add patched file" to flash it
17- Click on "Keep the current location"
18- Flash and wait till the operation to finish
19- Go to "ROMs" to make sure that the new second ROM is added
20- Now close the app and re-open it for refreshing
21- Adding the "Gapps Package"
22- Go to "Patch Zip File"
23- Click on "Add flashable zip"
24- Choose the required any gapps package
25- Click "OPEN"
26- Check and make sure that the ID in step 10 "Yureka or any name you like" is appeared as "Yureka or any name you like (Data slot)"
27- Repeat the steps from 11 to 18
28- Reboot
29- Install the DBP again
30- Choose the primary ROM and reboot
31- To install boot ui==>Go to settings==>click on install boot ui (it will give you option to boot to which rom on every reboot)(This step is optional)(in order to use 'boot ui' update ramsdisk of both rom)
About Partitons:
data-slot = internal storage (can be used)(recommended)
Extsd-slot = external sd card (can be used)
Primary= System Partition ( No use )
Secondary = System Partition (Only can be used if much of sytem space left)
Multi-slots = cache partition ( No use )​
What's Working:
Everything
What are not Working:
Tell me
Special thanks to:
@chenxiaolong for such an beautiful open source project
@dg28gadhavi (For guiding me the basics and helping in every manner he can)
Contributors
Nik001, dg28gadhavi, chenxiaolong
Official XDA Thread: Official Thread
Official Sources Code:https://github.com/chenxiaolong/DualBootPatcher
Sources Code:https://github.com/Nikesh001/DualBootPatcher
Plz give a thumbs up to the thread if you all like it:good:
HAPPY DUALBOOTING:good:

Nik001 said:
Finally Builded Dual Boot Patcher For Redmi 4x With All Fixes.
Note:- Redmi 4x/4(India) both are same.
Note:-I AM NOT RESPONSIBLE IF ANYTHING HAPPENS TO YOUR DEVICE.USE AT YOUR OWN RISK.THIS IS PERSONALLY TESTED BY ME SO IT SHOULD NOT CREATE ANY PROBLEM IF YOU FOLLOW THE STEPS ABOVE PROPERLY
ENJOY
The Requirement:
1- TWRP Latest[Recommended] ==> TWRP For Santoni
2- Decrypted Data ==> (Format Data)(Important Step or Else Rom will not boot and it will wipe internal storage so take a backup)
3- Magisk or Supersu (I used Magisk)
The Installation Steps:
1- Install the latest DBP from here ==> Dual Boot Patcher
(As this build is debug it will create another app name 'Leaks' so dont uninstall it will also uninstall DBP app)
2- Go to Settings ==>Installed apps==>All==>Documents==>Enable
3- Go to app and click on ROMs and grant it a root access.
4- Click yes to update the "Primary Kernel"
5- Go to "Patch Zip File"
6- Click on "Add flashable zip"
7- Choose the required ROM such as "YurekaOS"
8- Click "OPEN"
9- Under partition configuration choose "Data slot/Ext slot/secondary(if have enough space)"
10- Enter and ID as "Yureka or any name you like"
11- Click on "Continue"
12- Click on "SAVE"
13- Click on "Right Mark" to patch the zip file
14- Wait till the operation to finish
15- Go to "ROMs"
16- Click on "Add patched file" to flash it
17- Click on "Keep the current location"
18- Flash and wait till the operation to finish
19- Go to "ROMs" to make sure that the new second ROM is added
20- Now close the app and re-open it for refreshing
21- Adding the "Gapps Package"
22- Go to "Patch Zip File"
23- Click on "Add flashable zip"
24- Choose the required any gapps package
25- Click "OPEN"
26- Check and make sure that the ID in step 10 "Yureka or any name you like" is appeared as "Yureka or any name you like (Data slot)"
27- Repeat the steps from 11 to 18
28- Reboot
29- Install the DBP again
30- Choose the primary ROM and reboot
31- To install boot ui==>Go to settings==>click on install boot ui (it will give you option to boot to which rom on every reboot)(This step is optional)(in order to use 'boot ui' update ramsdisk of both rom)
About Partitons:
data-slot = internal storage (can be used)(recommended)
Extsd-slot = external sd card (can be used)
Primary= System Partition ( No use )
Secondary = System Partition (Only can be used if much of sytem space left)
Multi-slots = cache partition ( No use )
What's Working:
Everything
What are not Working:
Tell me
Special thanks to:
@chenxiaolong for such an beautiful open source project
@dg28gadhavi (For guiding me the basics and helping in every manner he can)
Contributors
Nik001, dg28gadhavi, chenxiaolong
Official XDA Thread: Official Thread
Official Sources Code:https://github.com/chenxiaolong/DualBootPatcher
Sources Code:https://github.com/Nikesh001/DualBootPatcher
Plz give a thumbs up to the thread if you all like it:good:
HAPPY DUALBOOTING:good:
Click to expand...
Click to collapse
Hey please help me i am also trying to port this but I don't have a proper idea how to

Can i have 2 rom with 16gb rom?

Hey, i have try this. Buty device going to bootlop. How dp i fix this?

randifilan said:
Hey, i have try this. Buty device going to bootlop. How dp i fix this?
Click to expand...
Click to collapse
How can you get bootloop?

When i try this. When i switch tto the secondary rom. My phone is bootloop.

Can you provide a video for me on redmi 4x? I have try many time but still bootloop. My phone is vibrate when change the rom. I try this oh R.R 5.8.4.

Install the dualboot patcher utilities, download from official thread. Try it and comment again if it success.

can i use lazy flasher for step 2

Hey Nik
The official build is out ..and I have made an Instructional thread on mi forum .
I want to know ..Why can't I use magisk in second ROM
.Where I am doing wrong .
I have tried to flash it patched ... Failed
Non patched direct through recovery ...failed .
Plz help

Wasef x said:
Hey Nik
The official build is out ..and I have made an Instructional thread on mi forum .
I want to know ..Why can't I use magisk in second ROM
.Where I am doing wrong .
I have tried to flash it patched ... Failed
Non patched direct through recovery ...failed .
Plz help
Click to expand...
Click to collapse
Can you give me the link?

randifilan said:
Can you give me the link?
Click to expand...
Click to collapse
Sure ..
Here it is
http://en.miui.com/thread-825128-1-1.html

Wasef x said:
Sure ..
Here it is
http://en.miui.com/thread-825128-1-1.html
Click to expand...
Click to collapse
I already try from this, but failed, are success do that? I try in from RR, and install AEX, when switch the rom, my phone got vibrate twice and go to twrp, i use dualboot utility and doent work. Are you success?

randifilan said:
I already try from this, but failed, are success do that? I try in from RR, and install AEX, when switch the rom, my phone got vibrate twice and go to twrp, i use dualboot utility and doent work. Are you success?
Click to expand...
Click to collapse
I have it working .
One thing ..
When you switch ROM .
Don't do it directly .
First update the ramdisk of that ROM on which you wanna switch .
Otherwise it doesn't boot

Wasef x said:
I have it working .
One thing ..
When you switch ROM .
Don't do it directly .
First update the ramdisk of that ROM on which you wanna switch .
Otherwise it doesn't boot
Click to expand...
Click to collapse
I have update the ramdisk. But still not work. Also failed.

I can't enable wifi after updating primary rom (Xiaomi. Eu). . Any solution?

How to decrypted data?

strbgs27 said:
How to decrypted data?
Click to expand...
Click to collapse
TWRP...Wipe...Format Data

What means step 29? Install the APP again?
Edit: Omg! Selected Second Rom and now it starts direct in TWRP... And i can't start Primary Rom .....
Really dont try this if u want to save time x)))))))

Not working on redmi 4 indian
Currently I am on redmi 4x global stable miui 9 rom and my device is redmi 4 64gb. Everything goes well. But when I reboot my device it vibrate 5 times and reboot in twrp. I've tried two rom resurrection remix v5.8.5 and viper os, but no any works..

MIUI 10 portrait mode camera with manual mode+4K video+Focus pick (Only beta Miui 10)

(Update)
Add HDR at video
I'm not developer.
I'm just edited some line/codes for adding some features.
I'm also sorry for can't find actual protrait mode camera developer post/name
Process:
1. download the zip file
Download
2. Go-to twrp
3. Wipe cache *optional
4. Flash the zip
5. Reboot
Enjoy the features

Thanks it works!

abed0203 said:
I'm not developer.
I'm just edited some line/codes for adding some features.
I'm also sorry for can't find actual protrait mode camera developer post/name
Process:
1. download the zip file
Download
2. Go-to twrp
3. Wipe cache *optional
4. Flash the zip
5. Reboot
Enjoy the features
Click to expand...
Click to collapse
Please say me whats your miui version??

[email protected] said:
Please say me whats your miui version??
Click to expand...
Click to collapse
Miui 10 global beta 8.7.26

[Treble] Android GSI on Kenzo/Kate. [SnapDragon]

UPDATE - Pixel Experience Official is out for Kenzo. Link attached below. Ongoing support for GSI users though.
https://forum.xda-developers.com/redmi-note-3/development/rom-pixel-experience-t3835648
-------------------------------------------
Disclaimer: I'm not responsible for bricked devices, flash at your own risk. I might be able to help with restoring your device though.
This is a guide to installing Android GSI on Redmi Note 3 (Kenzo)
---------------------------------------------------
What works-
RIL
GPS
Camera
Pretty much everything
What doesn't work-
Bluetooth
Hotspot
VoLTE(I couldn't test)
(NOTE - Bugs vary GSI to GSI)
---------------------------------------------------
Required files -
Grab these files first, and keep them on your SD card
TWRP Treble - https://androidfilehost.com/?fid=5862345805528059847
Android GSI(USE ARM64 A-ONLY) - for this tutorial, I'm using Phhusson's AOSP Pie GSI found here - https://forum.xda-developers.com/pr...vice-development/aosp-9-0-phh-treble-t3831915
List of GSI's - https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
Pie GApps (If using Pie GSI) - https://forum.xda-developers.com/android/development/gapps-unofficial-opengapps-builds-t3828141
Vendor Image - https://androidfilehost.com/?fid=1322778262903993757
Permissive SELinux Enabler - https://drive.google.com/file/d/1KFdPH2JGtvkXwt2emxPb-k7zdv2pLd-F/view?usp=drivesdk
Magisk 16.7 (minimum 16.7, you can use 17 as well)- https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589
Latest Firmware - https://forum.xda-developers.com/redmi-note-3/development/firmware-hmnote3proglobal-t3574361/page176
Optional - Digital Well-being (ONLY FOR PIE)
Digital Well-being apk (Download latest version) - https://www.apkmirror.com/apk/googl...wellbeing-0-2-207862754-android-apk-download/
Digital Well-being Magisk Module - https://drive.google.com/file/d/1AAFMWbAAK-febiP9h4iZMJONEHXopmEU/view?usp=drivesdk
--------------------------------------------
Assuming you have an unlocked bootloader, and know your way in and around Android, let's begin!
How to install -
1. First, flash the Treble enabled TWRP.
2. Reboot to recovery.
3. Mount all partitions, and wipe all partitions.
4. Flash the Vendor Image zip file and immediately flash the Permissive SELinux Enabler.
5. Clear Dalvik/Cache.
6. Mount all partitions, and wipe system.
7. Flash GSI to System partition *only*.
8. Reboot to System.
9. Reboot to recovery.
10. Perform a factory data reset, and flash GApps
11. Reboot to System, and complete setup.
12. After completing setup, reboot to recovery and flash Magisk 16.7
13. Reboot to System
14 Reboot to recovery and flash firmware.
15. Profit!
If you want Digital Well-being (ONLY FOR PIE) -
16. Install Digital Well-being apk
17. Flash Digital Well-being Magisk Module through Magisk Manager
18. Reboot
19. Profit!
-------------------------------------------------------
Tested on Snapdragon version, don't know if it works on MTK.
Screenshots are attached.

Fixes -
If you have the QS toggles moving out of the header like the screenshot attached in #1, do the following steps
1. Enable Developer Settings,
2. Find Smallest Width setting
3. Increase the value by 20. (If it's 360, make it 380)
4. Profit!
------------------------------------------
Google Camera + Face Unlock fix.
If Google Camera/Face Unlock doesn't work for you, do the following -
1. Reboot to recovery
2. Mount system
3. Flash the zip file (download link below)
4. Clear cache
5. Reboot to system
This should make Face Unlock work again, and GCam work as well.
Download patch - https://drive.google.com/file/d/17OUBxhsfeK0625_pYe8aRNr5L6doKdAK/view?usp=drivesdk
------------------------------------------
Can't find Smart Lock in settings?
1. Go to Settings < Security and Location.
2. Scroll down and click Advanced.
3. Click Trust Agents.
4. Switch on Trust Agent for Smart Lock.
You should now have Smart Lock option below Fingerprint.
-------------------++++++++++++++++-----------------------
For Changing accent colours -
Download this file - https://t.me/kenzousersglobal/1169
1. Flash it in recovery
2. Reboot to system
3. Go to Settings - Display - Advanced. Scroll down to find "Colour Theme"
4. Select colour theme and select colour of your choice.
5. Profit!
---------------------------------
Custom kernels that currently work
Radon - https://drive.google.com/file/d/1LYggpHDVph1fvWctIKY4FqQwtRb6Svh0/view
---------------------------------
Review - after extensive testing, I found this to be daily driver material, with the only exception being Bluetooth, Hotspot, and VoLTE(I couldn't test it myself)
Special thanks to - @corkiejp

Is it possible to get an Overlay Patch for Mi 8?

NielsvdS said:
Is it possible to get an Overlay Patch for Mi 8?
Click to expand...
Click to collapse
I honestly have no clue. I have only gathered all the patches and files for Kenzo and made them into one guide.

Thanks for the guide: -
Digital Well-being apk (Download latest version) <<<< Links to the overlay zip and not the apk.
Sourced the beta of apkmirror: - https://www.apkmirror.com/apk/googl...wellbeing-0-2-207862754-android-apk-download/
I used Mind the Gapps found on Telegram, when flashing.
Is it possible to dirty flash open gapps?

Work on kate devices?

Why is it there system.img.xz should I remove .xz rename it
---------- Post added at 04:24 PM ---------- Previous post was at 03:42 PM ----------
1.flashed carlosvendor.zip
2.mounted system vendor cache
3.flshed system.img as system image
After rebooting stuck at fastboot logo

sharan565 said:
Why is it there system.img.xz should I remove .xz rename it
---------- Post added at 04:24 PM ---------- Previous post was at 03:42 PM ----------
1.flashed carlosvendor.zip
2.mounted system vendor cache
3.flshed system.img as system image
After rebooting stuck at fastboot logo
Click to expand...
Click to collapse
You need to extract the image file from that compressed format, use windows are download an app that will extract it.
Suggestion RAR from play: - com.rarlab.rar or alternative app that will do the same.

corkiejp said:
You need to extract the image file from that compressed format, use windows are download an app that will extract it.
Suggestion RAR from play: - com.rarlab.rar or alternative app that will do the same.
Click to expand...
Click to collapse
Thanks man I will try

Hey @Sid127, this is really nicely written tutorial, thank you What bothers me, why we need to mount partitions once again in step 6? Partitions were mounted in step 3 and there wasn't any reboot in meanwhile.
3. Mount all partitions, and wipe all partitions.
4. Flash the Vendor Image zip file.
5. Clear Dalvik/Cache.
6. Mount all partitions, and wipe system.
7. Flash GSI to System partition *only*.
Click to expand...
Click to collapse
Second question, maybe easier... If I have existing TWRP backup for non treble ROM, is it OK to restore such backup using Treble recovery after wiping everything? Or it's recommended to flash previous recovery first?

wxtester said:
Hey @Sid127, this is really nicely written tutorial, thank you What bothers me, why we need to mount partitions once again in step 6? Partitions were mounted in step 3 and there wasn't any reboot in meanwhile.
Second question, maybe easier... If I have existing TWRP backup for non treble ROM, is it OK to restore such backup using Treble recovery after wiping everything? Or it's recommended to flash previous recovery first?
Click to expand...
Click to collapse
1. You just need to make sure that all partitions are mounted.
2. You can restore the backup through Treble TWRP.
Happy flashing!

Hexvessel1992 said:
Work on kate devices?
Click to expand...
Click to collapse
I don't know, I need someone to test it. It should work, since the Vendor for Kenzo and Kate are the same.

corkiejp said:
Thanks for the guide: -
Digital Well-being apk (Download latest version) <<<< Links to the overlay zip and not the apk.
Sourced the beta of apkmirror: - https://www.apkmirror.com/apk/googl...wellbeing-0-2-207862754-android-apk-download/
I used Mind the Gapps found on Telegram, when flashing.
Is it possible to dirty flash open gapps?
Click to expand...
Click to collapse
I'll update the thread with the right link
I think it is possible to dirty flash Open Gapps, but it might give bugs, always go for a clean flash

Everything works for me, only thing was that at the first setup it was stuck on "checking for updates". So I tried the method of tapping all sides of the screen (from top-left clockwise to bottom-left) and it skipped the setup. The flashlight is a little wonky, but that's the only thing that was getting in my way. The audio was a little too quiet, so I installed some app on the playstore to gain it. Thanks for such a comprehensive guide! Android Pie is amazing, but development for it on a 3 year old device is even more so!

srishant said:
Everything works for me, only thing was that at the first setup it was stuck on "checking for updates". So I tried the method of tapping all sides of the screen (from top-left clockwise to bottom-left) and it skipped the setup. The flashlight is a little wonky, but that's the only thing that was getting in my way. The audio was a little too quiet, so I installed some app on the playstore to gain it. Thanks for such a comprehensive guide! Android Pie is amazing, but development for it on a 3 year old device is even more so!
Click to expand...
Click to collapse
I had to forage through 4 complex guides, scourge through XDA and Telegram for all the patches, and hence could make such a simple guide. Apparently, devs on the Telegram channel are working on the Bluetooth and VoLTE fix I'll update once that happens!

Bolte
Test n let me know if it works
https://t.me/kenzoromnews/1445
Modify for treble then flash

amog787 said:
Bolte
Test n let me know if it works
https://t.me/kenzoromnews/1445
Modify for treble then flash
Click to expand...
Click to collapse
I did see that, but when I flashed it, it messed upy system and I had to reinstall the GSI. I don't know how to modify it for Treble, could you do it? I'm happy to test. I believe that fix is for Flashavle ZIPs, not for Treble GSIs.

Possible Gcam and stock working patch!
Posted this in AOSP Pie Rom thread, may also work for the GSI?
corkiejp said:
I found Gcam Pie Fix for another device in this thread.
Link to Gcam Pie Fix: - https://drive.google.com/file/d/1D5qvlA-QbQu6xoWpsLPyWquMkS3hxXi3/view
Gcam that I'm using: - https://androidfilehost.com/?fid=673956719939833577
^^^ From this thread, maybe newer versions available.
I was able to setup face unlock after flashing the above fix, you may also need to enable Smart Lock (Google) as a trusted agent.
It is buggy and the face option may not always trigger, plus you need to hold the phone far from you and swipe when the lock symbol appears (no fast unlock options xposed).
Another benefit of flashing another Camera (V 2.0.002) Started working as well. (Don't know if that is the default AOSP camera or something I restored from backup? Could be Snap Camera from LOS).
Click to expand...
Click to collapse

corkiejp said:
Posted this in AOSP Pie Rom thread, may also work for the GSI?
Click to expand...
Click to collapse
Is there also an uninstaller for this fix? I'll test only if there is an uninstaller for it. Last time I tested a fix I had to format data to revert...

Sid127 said:
Is there also an uninstaller for this fix? I'll test only if there is an uninstaller for it. Last time I tested a fix I had to format data to revert...
Click to expand...
Click to collapse
Not that I'm aware of, but this just places/replaces some Lib and Lib64 in system partition.
If your worried about it, back up your system partition, flash the this patch and wipe caches.
If you experience problems, just restore your system partition.
It was reported working by someone else here.

How to make GSI Flasher for Samsung Galaxy A51 Super Partition Image

How to convert a gsi image so that it can be installed on a dynamic partition or super image partition. It may be work for other Android devices. This tool will help you to install gsi image on Dynamic Partition or Super Image Partition.
PC/Laptop
1. Extract GSI_Flasher.zip (or GSI_Flasher_SDCard if you want install GSI from SDCard) >> 3 folder gsi, META-INF, and Scripts
2. Extract Havoc-OS-v3.12-20201230-Official-arm64-ab.img.xz (your GSI file image)
3. Rename gsi to system.img (it must be rename to system.img, if you don"t rename, your phone get bootloop after reboot system)
4. Put <system.img> in gsi folder
5. Repack this 3 folder gsi, META-INF, and Scripts to zip (you can name it, whatever you want)
Credit
@redymedan
@soulr344
@phhusson
@topjohnwu
@ianmacd

Gsi flasher does not work for me, it does not go past the device logo

I am making an application that does this process automatically. Can I publish? I will put due credits

gsuzeda said:
I am making an application that does this process automatically. Can I publish? I will put due credits
Click to expand...
Click to collapse
Fell free to share

Very Good my friend
This option sd card
If system start from sd is possible dual boot?
Create New thread havoc starting from sd this option is usefull for no Format internal sd?
Sorry i read GSI flash from SD no in sd

Edit: moved my comment to main post here: https://forum.xda-developers.com/t/...si-android-10-for-samsung-galaxy-a51.4214501/

LichtEstarossx said:
Gsi flasher does not work for me, it does not go past the device logo
Click to expand...
Click to collapse
Same for me.
I made a zip containing the latest /e/ OS GSI from https://images.ecloud.global/dev/treble_arm64_bvN/ on a Samsung Galaxy S21 (SM-G991B) but no luck : the phone keeps bootlooping.

Here's the displayed message :
Code:
--------------------------------------------------
GSI Flasher
--------------------------------------------------
Extracting script..
-------------------------------------------------- GSI Flasher-------------------------------------------------- Extracting script..Extracted file "/tmp/scripts/script.sh"
Extracted 1 file(s)
Extracting GSI Image..
Extracting GSI Image..Extracted file "/sdcard/.gsi/system.img"
Extracted 1 file(s)
Flashing GSI..
about to run program [/sbin/sh] with 3 args
Flashing GSI..INFO: Successfully flashed sparse image
--------------------------------------------------
Successfully flashed GSI!
NOTE: please wipe data
to avoid issues.
--------------------------------------------------
-------------------------------------------------- Successfully flashed GSI! NOTE: please wipe data to avoid issues.--------------------------------------------------script succeeded: result was [--------------------------------------------------]
Full recovery log is attached.

gsuzeda said:
I am making an application that does this process automatically. Can I publish? I will put due credits
Click to expand...
Click to collapse
Hi gsuzeda ? could you send your app ? thank u so much !!

Thank you so much. worked flawlessly on my Samsung Tab S7+

CVLover said:
Большое спасибо. работал безупречно на моем Samsung Tab S7+
Click to expand...
Click to collapse
CVLover said:
Большое спасибо. работал безупречно на моем Samsung Tab S7+
Click to expand...
Click to collapse

CVLover said:
Thank you so much. worked flawlessly on my Samsung Tab S7+
Click to expand...
Click to collapse
Hello, how does the firmware show itself in use over time?