Can Essential phone drive 64ohm impedance earphones - Essential Phone Questions & Answers

Can Essential phone drive 64ohm impedance earphones with usb-c to 3.5mm connector provided in box without any amp. Does it have good DAC?

Related

Usb to mini jack

Hi,
I just got an usb to mini jack cable but when i play audio it plays via the speaker and not the headphones.
is the cable not supported or do i need to change a setting somewhere
If i use the headphones that were with the phone they work.
But not my new usb to mini jack with my own headphones.
I also have a bleutooth unit but this uses mini-mini jack, and i twas supplied with a headphone inc Mic, the normal adapters for mini-mini jack to mini jack will enable the Mic all the time and can't play stereo, is there a solution for this?
I was already thinking about using tape or something
(the plug for headphones + mic is divided in 3 parts and a normal plug is divided in 2 parts)
thanks for any advise

Split Power and keep microphone/headset on jack/usb

I've got several splitters but the one thing I can't seem to find is this: split the Kaiser output between USB for power and to a female jack or usb that allows a microphone headset to be put inline. This is not the same as using a splitter that gives a 3.5mm jack with a built in microphone.
The reason is I need to power my Kaiser on the motorbike, while supplying a duplex for my helmet headset that has a microphone/earpiece built in supplied by a male jack. (I.e the male jack carries voice and sound).
thanks.
http://www.expansys.com/htc/p_htc_item.aspx?i=148544
but you may need a extUSB -> 3.5mm jack or whatever type of headset you use
expansys have those 2
Ahh, that's great. You're right I will need a usb to female jack that keeps the mic/ear available.

Micro USB to 3.5mm Audio?

Hi all,
I'm looking for a way to use my earphones with 3.5mm audio jack via the micro USB port. Ideally, without carrying around a bulky separate amp. I bought a small micro USB to 3.5mm jack cable but it doesn't do anything straight out the box.
I don't know if i just need some sort of software to get the cable I've already bought working, or if I need some other sort of hardware.
Reason for all of this - I managed to break my 3.5mm audio output (plugged it in to a cheap ebay car audio unit and have blown something). I have wireless earphones....but just don't like them as much as my original wired ones!!!!
Hopefully someone can help me out!!
Cheers
You will NEED external DAC and AMP.
Micro usb can only output digital signal.
Sent from my SM-G935F using Tapatalk
You need a USB DAC. There a quite a few like FiiO Q1, AudioQuest Drangonfly, Oppo HA2-SE, Chord Mojo etc. Money is the limit
By itself micro USB does not transmit sound, it transmits a digital signal, you will need an additional USB DAC
Get a quality Bluetooth receiver. Here's a great one with apt-x low latency which is crucial for video.
TaoTronics Bluetooth 4.1 Transmitter / Receiver, 2-in-1 Wireless 3.5mm Adapter (aptX Low Latency, 2 Devices Simultaneously, For TV / Home Sound System) https://www.amazon.com/dp/B01EHSX28M/ref=cm_sw_r_cp_apa_urHgzb0W0T91H

c-port to usb to my headphones

playing hardwire headphones from tab s7 plus 5g.
usb-c to usb, usb to DAC, DAC to headphone amp, hp amp to vmodas. had to operate on the UAG case for the adapter to fit.

Is it possible to use a USB-C to 3.5mm audio adapter for s10 plus?

I know there are several types of cables USB-C To 3.5mm Audio jack. Is it needed an original Samsung cable for this purpose?
There are adapters USB-C To 3.5mm audio jack that are dual and permit charge at he same time. Are all of them compatible with S10 plus?
Does your S10+ not have the headphone jack like mine does??

Categories

Resources