[H96 H2] RK3328 - Compiling Firmware Android 9.0 - Android Stick & Console RockChip based Computers
Hello
I own a Android Tv BOX : H96Max H2 running Android 7.1.2
I flash it with this rom works perfectly : MX10Pro running android 8.1
https://androidpctv.com/firmware-tvb...3328-10132018/
No bugs and rooted !
I try an antoher firmware running android 9.0 but wifi/bluetooth/blue screen doesn't work.
this firmware is made for Mx10.
https://androidtvbox.eu/new-mx10-tv-...-soc-20190308/
No stuck on boot. After reboot, it launchs on Android 9.0. But wifi doesn't work. No root.
So i think, kernel is different. But I don't know programming/modify firmware to replace any files.
Can you help me ? Or just replace functionnal kernel in the last firmware (mx10) ???
Can you install supersu in this firmware ?
Thank you very much
Wifi chip is HS2734A
Hi
first backup the drivers from the working software (/system/etc/firmware)
then flash Android 9, and replace drivers with the backed up ones
and set the permissions as (folders 755 and files 644)
i suggest using X-plore file manager is the easiest
i hope it works, good luck
snyker said:
Hello
I own a Android Tv BOX : H96Max H2 running Android 7.1.2
I flash it with this rom works perfectly : MX10Pro running android 8.1
https://androidpctv.com/firmware-tvb...3328-10132018/
No bugs and rooted !
I try an antoher firmware running android 9.0 but wifi/bluetooth/blue screen doesn't work.
this firmware is made for Mx10.
https://androidtvbox.eu/new-mx10-tv-...-soc-20190308/
No stuck on boot. After reboot, it launchs on Android 9.0. But wifi doesn't work. No root.
So i think, kernel is different. But I don't know programming/modify firmware to replace any files.
Can you help me ? Or just replace functionnal kernel in the last firmware (mx10) ???
Can you install supersu in this firmware ?
Thank you very much
Click to expand...
Click to collapse
I tried the MX10Pro running android 8.1 on h96 max 4gb 64gb device.Works perfectly but at times it refuses to boot or takes too long.How do you solve this issue? Thanks in advance.
I'm sorry for my pardon ..
I'm sorry for my pardon ..
Hi @snyker
Were you able to resolve this? Did you get wifi running on H96 H1/H2 box after upgrade?
I flashed the Android 9 version from below link and every thing seems to be good except Wifi.
MediaFire
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
download2391.mediafire.com
snyker said:
Hello
I own a Android Tv BOX : H96Max H2 running Android 7.1.2
I flash it with this rom works perfectly : MX10Pro running android 8.1
https://androidpctv.com/firmware-tvb...3328-10132018/
No bugs and rooted !
I try an antoher firmware running android 9.0 but wifi/bluetooth/blue screen doesn't work.
this firmware is made for Mx10.
https://androidtvbox.eu/new-mx10-tv-...-soc-20190308/
No stuck on boot. After reboot, it launchs on Android 9.0. But wifi doesn't work. No root.
So i think, kernel is different. But I don't know programming/modify firmware to replace any files.
Can you help me ? Or just replace functionnal kernel in the last firmware (mx10) ???
Can you install supersu in this firmware ?
Thank you very much
Click to expand...
Click to collapse
hello friend
ı have this device ( h96 max h2 rk3328 )
I wanted to upgrade this device but couldn't find the appropriate version. I have uploaded many versions now. not working or waiting for the h96 max logo on the screen. Where can I find versions suitable for this device? can you help me =?
I could not download the img files from the links you sent. I guess it's broken.
lutfubu said:
hello friend
ı have this device ( h96 max h2 rk3328 )
I wanted to upgrade this device but couldn't find the appropriate version. I have uploaded many versions now. not working or waiting for the h96 max logo on the screen. Where can I find versions suitable for this device? can you help me =?
I could not download the img files from the links you sent. I guess it's broken.
Click to expand...
Click to collapse
Try below for RK3328 H96 MAX H1/H2
Firmware X88 Max Plus with RK3328 SoC (10-13-2018)
FIRMWARE: Android 9.0 for X88 Max Plus with RK3328 SoC (12-07-2018)
rmghrr said:
Try below for RK3328 H96 MAX H1/H2
Firmware X88 Max Plus with RK3328 SoC (10-13-2018)
FIRMWARE: Android 9.0 for X88 Max Plus with RK3328 SoC (12-07-2018)
Click to expand...
Click to collapse
Thank you so much! This firmware is really snappie on my H96 Max H2. Even WiFi works.
rmghrr said:
Try below for RK3328 H96 MAX H1/H2
Firmware X88 Max Plus with RK3328 SoC (10-13-2018)
FIRMWARE: Android 9.0 for X88 Max Plus with RK3328 SoC (12-07-2018)
Click to expand...
Click to collapse
hey guys, this link seems off, has anyone gotten this firm? i was going to flash an h96 max plus in my max h2, which now, I've got doubt If the plus version will really work. i haven't done backup of the drivers
cheers
piramide67 said:
hey guys, this link seems off, has anyone gotten this firm? i was going to flash an h96 max plus in my max h2, which now, I've got doubt If the plus version will really work. i haven't done backup of the drivers
cheers
Click to expand...
Click to collapse
The link was shared from below post
Download Android Oreo 9.0 stock firmware for X88 Max+ 4GB+64GB TV Box «
chinagadgetsreviews.com
Related
Official Nougat Released for Mi Max/Prime!
Today's China Developer Rom for Mi Max/Prime has brought Official Nougat for it. China Stable, Global Beta and Stable are expected by next week MIUI Version - 7.2.9 China Developer Android Version - 7.0 [Nougat] (Click for Changelogs) Download Links PHP: http://bigota.d.miui.com/7.2.9/hydrogen_images_7.2.9_20170209.0000.00_7.0_cn_1b99181f48.tgz Mi Max 32G China Nougat Fastboot http://bigota.d.miui.com/7.2.9/helium_images_7.2.9_20170209.0000.00_7.0_cn_7e90dd1af9.tgz Mi Max Prime 64G/128G China Nougat Fastboot http://bigota.d.miui.com/7.2.9/miui_MIMAX_7.2.9_99a7e2e01b_7.0.zip Mi Max 32G China Nougat Recovery http://bigota.d.miui.com/7.2.9/miui_MIMAX652_7.2.9_a7f964ac25_7.0.zip Mi Max Prime 64G/128G China Nougat Recovery
I saw that once you upgrade to 7.0 (for example v7.2.9) that bootloader will be automatically locked, and we will have to unlock it once again. Can anyone confirm if this is true,
dj69holland said: I saw that once you upgrade to 7.0 (for example v7.2.9) that bootloader will be automatically locked, and we will have to unlock it once again. Can anyone confirm if this is true, Click to expand... Click to collapse Bootloader cannot be locked unless its instructed by you. Flashing process doesn't have any interference with the Bootloader. Still, about my personal experience, I migrate from custom roms to MIUI 7.1.12 and back atleast twice a week. Its not the case. And given the reason neither its supposed to be. You can clear your doubts.
techy97 said: Bootloader cannot be locked unless its instructed by you. Flashing process doesn't have any interference with the Bootloader. Still, about my personal experience, I migrate from custom roms to MIUI 7.1.12 and back atleast twice a week. Its not the case. And given the reason neither its supposed to be. You can clear your doubts. Click to expand... Click to collapse Yes this is my understanding too, and i myself flash constantly - but according to xiaomi.eu page for build 7.2.9 : " RELESED Android 7.0 for MI4C, Mi4S, MIMAX, MIMAX PRO, MINote PRO Your BOOTLOADER will be relocked after upgrade to Android 7.0 so unlock it by en.miui.com/unlock after ROM installation again!!!"
dj69holland said: Yes this is my understanding too, and i myself flash constantly - but according to xiaomi.eu page for build 7.2.9 : " RELESED Android 7.0 for MI4C, Mi4S, MIMAX, MIMAX PRO, MINote PRO Your BOOTLOADER will be relocked after upgrade to Android 7.0 so unlock it by en.miui.com/unlock after ROM installation again!!!" Click to expand... Click to collapse No worries, I flashed today without knowing above and my bootloader still unlocked. After flashing gapps I get lots error messages. Otherwise no big difference in miui. Worked ok with supersu 2.79 and twrp 3.0.2
fedakpeter said: No worries, I flashed today without knowing above and my bootloader still unlocked. After flashing gapps I get lots error messages. Otherwise no big difference in miui. Worked ok with supersu 2.79 and twrp 3.0.2 Click to expand... Click to collapse Thanks for this. This might have cleared his doubt. And btw, its the Official China Dev you flashed I suppose?
dj69holland said: Yes this is my understanding too, and i myself flash constantly - but according to xiaomi.eu page for build 7.2.9 : " RELESED Android 7.0 for MI4C, Mi4S, MIMAX, MIMAX PRO, MINote PRO Your BOOTLOADER will be relocked after upgrade to Android 7.0 so unlock it by en.miui.com/unlock after ROM installation again!!!" Click to expand... Click to collapse MIUI 7.1.12 is Android 7.0 Nougat
techy97 said: MIUI 7.1.12 is Android 7.0 Nougat Click to expand... Click to collapse yep, 7.1.12 on helium
fedakpeter said: yep, 7.1.12 on helium Click to expand... Click to collapse sorry, quoted you. Edited reply.
techy97 said: Today's China Developer Rom for Mi Max/Prime has brought Official Nougat for it. China Stable, Global Beta and Stable are expected by next week MIUI Version - 7.2.9 China Developer Android Version - 7.0 [Nougat] Click to expand... Click to collapse What is the security patch date for this Android N 7.2.9 China Developer ROM?
cmk7128 said: What is the security patch date for this Android N 7.2.9 China Developer ROM? Click to expand... Click to collapse 2017/1/1 Enviado desde mi MI MAX mediante Tapatalk
multiwindow removed, please tell me there is at least the option to change DPI
frantisheq said: multiwindow removed Click to expand... Click to collapse No way! I've been looking forward to properly implemented multiwindow since I first saw Android N. That's such a shame
yep, xiaomi took android 7.0 and transformed it to MIUI 8 based on 6.0 i was hoping at least for display resolution support from 7.0 but no, you still have to edit build.prop and distort apps and icons in default theme. i don't need 6.5" screen because of 1cm fonts
frantisheq said: yep, xiaomi took android 7.0 and transformed it to MIUI 8 based on 6.0 i was hoping at least for display resolution support from 7.0 but no, you still have to edit build.prop and distort apps and icons in default theme. i don't need 6.5" screen because of 1cm fonts Click to expand... Click to collapse It's been always Like that on MIUI, the changes come with MIUI upgrades not Android upgrades.
Nougat update for phab 2 series
Does anyone know how to update the android version of our phab 2? I got mine with android 6 m. I tried the system update but it i dont know what did it update? Firmware? I thought it will update the android version from 6 to 7 ..wth So does anyone here got their phab 2 an update for android 7?
According to this site http://www.theandroidsoul.com/lenovo-android-7-0-nougat-update/ there´s no hardware support found for Nougat release. Can someone confirm this?
Lenovo officially said NO. So .,....
sushil888 said: Lenovo officially said NO. So .,.... Click to expand... Click to collapse ARCore from google that it gonna replace tango will work on every phone above android 7... so that means,even if phab2 pro was ment to be the first AR Tango will left out of all these while it has extras on its hardware for exactly that reason. At least lenovo should put the kernel source and whatever else needed so some brave XDA dev can make some custom rom or bring somehow the nougat in the phab2 pro... at least Lenovo let XDA do your job!
I don't think these phones will update to 7. At least not yet. Operating speed is only 1.3 quad, personally I'm happy with its performance.
Disappointing these are stuck on Marshmallow and can't get Nougat or Oreo.
Any custom rooms for this device?
Lineage OS 14.1 Lenovo Phab2 PB2-650M silvers01 said: Does anyone know how to update the android version of our phab 2? I got mine with android 6 m. I tried the system update but it i dont know what did it update? Firmware? I thought it will update the android version from 6 to 7 ..wth So does anyone here got their phab 2 an update for android 7? Click to expand... Click to collapse Finally Lineage Os 14.1 ported for Lenovo Phab2 PB2-650M by ARRAKI. http://lenovo-forums.ru/topic/24812-lineage-141/?page=1
but there's not link to dowload is broken. And have a issue with the band mobile. Do u know of some rom available to this phone. I cant find anything.
Download some files to Asus Zenfone Max Plus from 4pda
Hello friends I finally found some files i want but it is in 4pda, can anyone who has access in 4pda download this please https://4pda.ru/forum/dl/post/14557985/DB_Files.rar =) Thanks a lot. Its files for mobile net - Asus Zenfone Max Plus (M1) ZB570TL
Swehub said: Hello friends I finally found some files i want but it is in 4pda, can anyone who has access in 4pda download this please https://4pda.ru/forum/dl/post/14557985/DB_Files.rar =) Thanks a lot. Its files for mobile net - Asus Zenfone Max Plus (M1) ZB570TL Click to expand... Click to collapse no need to do that. maybe your device is X018D Chinese version withno update. flashing with real ww or global firmware makes lost of the signal. If you mess up for flashing, look for this thread to download the stock firmware for that device https://forum.xda-developers.com/android/general/rom-asus-zenfone-max-plus-m1-google-apps-t3900039
Android Q for Zenfone max pro M2
I have seen some posts about Android Q GSI installing on max pro m1.. I have searched for the methods to install the rom for max pro m1, and I ended up with nothing. So please someone give me an idea or method on how to install the Android Q GSI on max pro m2. I'm eagerly waiting to install the rom on my phone........... Thanks in advance. ?
Not availbale yet arun ganesh said: I have seen some posts about Android Q GSI installing on max pro m1.. I have searched for the methods to install the rom for max pro m1, and I ended up with nothing. So please someone give me an idea or method on how to install the Android Q GSI on max pro m2. I'm eagerly waiting to install the rom on my phone........... Thanks in advance. Click to expand... Click to collapse Due to poor vendor from ASUS, all GSI methods are giving bootloop problem when trying to flash Q GSI
we'll have to wait. asus has a good hardware, but it's very poor at giving support on software.
I have found a method by searching google. In this site they clearly mentioned max pro m2 is working. Anyone pls test this method and give a suggestion. https://yrltech.com/install-android-q-gsi/
Black Shark 2 Global Rom SKYW1911121OS01MP5 JOYUI11??
Hello All, Can someone please tell me when users with MP5 firmware can expect an update for JOYUI11 (Android 10)? I have a Black Shark 2 SKW-H0 I know that Black Shark have started the roll out, but I have heard that MP5 users will have to wait a while longer.... Does anyone have any information on this? Thank you in advance. Matt
JOYUI 11 Update Same problem here, I updated my phone to MP6 now waiting for JoyUi 11.
Shah71 said: Same problem here, I updated my phone to MP6 now waiting for JoyUi 11. Click to expand... Click to collapse Have you updated your firmware since ? My phone is still in MP5 version and still not upgradable through OTA. Can you tell me which tuto you have followed to update your phone to MP6 please? Thanks