Database Users

Caska Android 4.4.2 2 din

Has anybody managed to root android caska 4.4.2?
Thanks

Anyone?
It says:
mcu: v3.00h7_ca712_f7e1430
kernel: 3.0.36+
android 4.4.2
Thanks

Also looking for a way to root this HU too.

Why don't you just flash Malaysk's ROM? It's easier and the ROM is much smoother than stock.

War-Rasta said:
Why don't you just flash Malaysk's ROM? It's easier and the ROM is much smoother than stock.
Click to expand...
Click to collapse
I've never used Android, I'm a iOS user and very afraid to brick my unit. I just download ROM for 4.4.2 and boot it according to the instructions?
My unit shows:
MCU Version: V3.00F8_CA380_E55B_ECI1455
Build number: D200 Ver2.01 20141228.2309
TCON Version: V6.00_HSD80_EC28e
Many thanks for your help!

War-Rasta said:
Why don't you just flash Malaysk's ROM? It's easier and the ROM is much smoother than stock.
Click to expand...
Click to collapse
I actually tried a Malaysk's rom and It gave me error in the middle of installation. I had to return the original rom. Not quite sure if I used the correct malaysk's rom. I have a rk3066 android. 4.4.2

Hi Guys,
I also have a similar unit. Did you manage to make a backup of current image? I want to upgrade because I have two issue: sometimes the unit doesn't complete the startup and I can't use sygic navigator.
Build number: D200-20150713.2225-S1
Kernel version:3.0.36+
[email protected] #883
Tue Jul 7 10:43:52 CST 2015
MCU Version:V3.00H7_CA712_F7E1430
TCON Version:V6.00_HSD70_F77Hi
Media Version:89J_0025_000000
SN Number:UNKNOWN
Bluetooth Version:I50E_ADK.HBS.0.20150521.1
Hardware Version:TFT:EC2_EBT
MB:EC2_D1S
MD: DE5GM_R82_TE6K
Best regards,

lmcoelho said:
Hi Guys,
I also have a similar unit. Did you manage to make a backup of current image? I want to upgrade because I have two issue: sometimes the unit doesn't complete the startup and I can't use sygic navigator.
Build number: D200-20150713.2225-S1
Kernel version:3.0.36+
[email protected] #883
Tue Jul 7 10:43:52 CST 2015
MCU Version:V3.00H7_CA712_F7E1430
TCON Version:V6.00_HSD70_F77Hi
Media Version:89J_0025_000000
SN Number:UNKNOWN
Bluetooth Version:I50E_ADK.HBS.0.20150521.1
Hardware Version:TFT:EC2_EBT
MB:EC2_D1S
MD: DE5GM_R82_TE6K
Best regards,
Click to expand...
Click to collapse
By your username I assume you're brazilian, right?
Where did you buy your unit?
This night I've managed to talk to a Caska sales director for LATAM and he said that they cannot give the stock ROM for security reasons. I still have problems with the clock and the startup also (blank screen). They say their engineering team is working on fixing that issue, but China has a holiday that starts today (Oct 1st.) and only ends Oct 7th. So I'll only have an answer after that day.
Maybe you can talk to your seller and see if he gives any support (I bought mine at www.rcmultimidias.com.br).

Sure I am, you are right.
I bought mine from aliexpress. I found a update.img file in some folder, but I'm not sure if it is the full image. I opened that image in a linux box and looks like we have everything, there some ext4 images, boot image and a lot of other files, but I'm not 100% sure about it. May be somebody with experience could verify that.
Another annoying thing is the music and video apps not reading files from sdcard, they only read USB and inand. I've modified the Music app to point it to the correct path, but I couldn't install it back to the unit (It fails to install without any error). At least if I could reassign music and video buttons to another app, that would be ok (VLC is working fine, just need to adjust volume).

purchio said:
By your username I assume you're brazilian, right?
Where did you buy your unit?
This night I've managed to talk to a Caska sales director for LATAM and he said that they cannot give the stock ROM for security reasons. I still have problems with the clock and the startup also (blank screen). They say their engineering team is working on fixing that issue, but China has a holiday that starts today (Oct 1st.) and only ends Oct 7th. So I'll only have an answer after that day.
Maybe you can talk to your seller and see if he gives any sup.
Click to expand...
Click to collapse
Guys. I am also brazilian and I bricked my unit. They sent my the original update.img and sad to put a update.txt file on sdcard and boot. But I can not boot. Any idea?
Thanks

danylam said:
Guys. I am also brazilian and I bricked my unit. They sent my the original update.img and sad to put a update.txt file on sdcard and boot. But I can not boot. Any idea?
Thanks
Click to expand...
Click to collapse
Normally you have to boot in recovery mode, something that I still don't know how to do for this unit, and then use that update.img to restore. See this thread http://forum.xda-developers.com/showthread.php?t=2660662, there some possible procedures there and may be one of them work for the caska.
How big is the update.img file they sent to you?

lmcoelho said:
Normally you have to boot in recovery mode, something that I still don't know how to do for this unit, and then use that update.img to restore. See this thread http://forum.xda-developers.com/showthread.php?t=2660662, there some possible procedures there and may be one of them work for the caska.
How big is the update.img file they sent to you?
Click to expand...
Click to collapse
Yeah. I have tried everything but could not boot. It is just a blank screen.
Here you go with the update.img.
https://www.sendspace.com/file/mjkgfj

Here I posted a video with all the problems I'm experiencing with this unit. The main problem is that I cannot setup the right time, so all Android apps are useless (they require a secure connection to their servers and this is only allowed with a valid certificate [that needs the correct date]).
I was trying to root my unit so that I could use ClockSync to fix the time every 30 seconds (it resets after 1 minute), but had no success on that.
https://www.youtube.com/watch?v=tWWCP9tAYm4
danylam said:
Guys. I am also brazilian and I bricked my unit. They sent my the original update.img and sad to put a update.txt file on sdcard and boot. But I can not boot. Any idea?
Thanks
Click to expand...
Click to collapse
Hi!
So, where did you managed to talk to Caska? I've tried contact with Caska Brasil with no success (they say they do not offer support for Android units), and Caska Global didn't give any answer ([email protected]).
I've downloaded your update.img, but it's for CA712 and my unit is a CA380-XLA, I'm afraid to brick it. Have you tried entering recovery mode pressing reset and power buttons the same time?
lmcoelho said:
Sure I am, you are right.
I bought mine from aliexpress. I found a update.img file in some folder, but I'm not sure if it is the full image. I opened that image in a linux box and looks like we have everything, there some ext4 images, boot image and a lot of other files, but I'm not 100% sure about it. May be somebody with experience could verify that.
Another annoying thing is the music and video apps not reading files from sdcard, they only read USB and inand. I've modified the Music app to point it to the correct path, but I couldn't install it back to the unit (It fails to install without any error). At least if I could reassign music and video buttons to another app, that would be ok (VLC is working fine, just need to adjust volume).
Click to expand...
Click to collapse
I can reassign the screen buttons in my unit. In the settings, go to the last menu: "Shortcuts". Not sure if there's a way to reassign the physical buttons without modifying the original ROM.

danylam said:
Yeah. I have tried everything but could not boot. It is just a blank screen.
Here you go with the update.img.
Click to expand...
Click to collapse
I'm newbie as well, but I know that you must need possible clue, since you brick your unit. I'm afraid to point you to the wrong direction, but I believe it deserves to try. I saw some threads discussing about the bootloader and connect via USB. Looks like to have to install the usb driver for the rock chip (RK3066, since it is dual core and there is a file RK3066Loader_uboot_upgrade2_4_16gok.bin in the update.img file). I don't have more details on that, but may dig deeper.

lmcoelho said:
I'm newbie as well, but I know that you must need possible clue, since you brick your unit. I'm afraid to point you to the wrong direction, but I believe it deserves to try. I saw some threads discussing about the bootloader and connect via USB. Looks like to have to install the usb driver for the rock chip (RK3066, since it is dual core and there is a file RK3066Loader_uboot_upgrade2_4_16gok.bin in the update.img file). I don't have more details on that, but may dig deeper.
Click to expand...
Click to collapse
I've tried pluggin a USB to the unit and connecting it to my PC with no success, no devices are recognized. I have developer mode active but no options to enable USB Debugging.

So, I was able to extract all APKs from the file danylam hosted, and it's quite different from my unit: I have only one "Settings" menu, and in my unit some essential apps weren't installed (like HBS_Carkit_ChangeLogoUtil.apk and HBS_Carkit_SyncGPSTime.apk). I've installed them and solved one of my problems: car starting with a GMC logo. But the SyncGPSTime.apk isn't being called by any applications, so it's not starting (and I cannot start from itself).
Then I tried installing the Settings.apk that came with the ROM and ended up with a non functional setup menu, unfortunately. Since in that version most settings are changed from the "Android Settings", and I couldn't install that apk (it shows me an unknown error), I've lost some essential menus.

danylam said:
Guys. I am also brazilian and I bricked my unit. They sent my the original update.img and sad to put a update.txt file on sdcard and boot. But I can not boot. Any idea?
Thanks
Click to expand...
Click to collapse
purchio said:
So, I was able to extract all APKs from the file danylam hosted, and it's quite different from my unit: I have only one "Settings" menu, and in my unit some essential apps weren't installed (like HBS_Carkit_ChangeLogoUtil.apk and HBS_Carkit_SyncGPSTime.apk). I've installed them and solved one of my problems: car starting with a GMC logo. But the SyncGPSTime.apk isn't being called by any applications, so it's not starting (and I cannot start from itself).
Then I tried installing the Settings.apk that came with the ROM and ended up with a non functional setup menu, unfortunately. Since in that version most settings are changed from the "Android Settings", and I couldn't install that apk (it shows me an unknown error), I've lost some essential menus.
Click to expand...
Click to collapse
Hi,
The only way to talk to caska global is using skype (coagent,service). Normally they are online at 9pm (Sao Paulo time).

lmcoelho said:
I'm newbie as well, but I know that you must need possible clue, since you brick your unit. I'm afraid to point you to the wrong direction, but I believe it deserves to try. I saw some threads discussing about the bootloader and connect via USB. Looks like to have to install the usb driver for the rock chip (RK3066, since it is dual core and there is a file RK3066Loader_uboot_upgrade2_4_16gok.bin in the update.img file). I don't have more details on that, but may dig deeper.
Click to expand...
Click to collapse
Can you tell me how to extract this bin file from the image?
Thanks

purchio said:
I've downloaded your update.img, but it's for CA712 and my unit is a CA380-XLA, I'm afraid to brick it. Have you tried entering recovery mode pressing reset and power buttons the same time?
Click to expand...
Click to collapse
I found the update.img in my CA712 with a simple search for update.img. I used the file browser and and did the search from / device.
---------- Post added at 10:59 AM ---------- Previous post was at 10:40 AM ----------
danylam said:
Can you tell me how to extract this bin file from the image?
Thanks
Click to expand...
Click to collapse
This is the linux tool to open the image http://forum.xda-developers.com/showthread.php?t=2257331
command:
Code:
./imgrepackerrk update.img
It creates a update.img.dump folder and the bin file should be in the update.img.dump/Image
Boot.img is compressed and if you want to see content do this:
Code:
mkdir boot
cd boot
gzip -cd ../boot.img | cpio -i -

lmcoelho said:
I found the update.img in my CA712 with a simple search for update.img. I used the file browser and and did the search from / device.
Click to expand...
Click to collapse
Tried searching mine but couldn't find any *.img files. But at least I've managed to uninstall the CA712 settings from my unit and revert to the original one.
Looks like your unit is a little bit different from mine.

[Guide] Unlock Bootloader // Install TWRP // Root - Android 7.x NOUGAT

OK, so there's a post nearly identical to this, with the CLEAR exception of it being specific to Android 6.x (Marshmallow). For that thread, go HERE.
DO NOT ATTEMPT ANY OF THE BELOW STEPS ON MARSHMALLOW. THIS IS FOR ANDROID 7.X (NOUGAT ONLY)​
OK, quick backstory. Like the other link, none of this is my work and all the people whom I've worked with and confirmed each step of these instructions are working and validated are here:
spotting, clsA, Atarii, faizalotai, BonezMontana, schluk and Sheldd. This is NOT my work, this is the combination of all these guys help. Thank them! If you need any help, please post here. I'll help the best I can, but I've got a 15 month old and between changing diapers and RAGING FITS due to lack of Cheddar Goldfish, I spend my side time flashing like crazy. PLEASE assume all risk and responsibility when following the instructions below. If you mess up, ask for help. I'm not liable. Neither are the guys you should be thanking above for this!
Cheers!
This process assumes the following: You're on stock Android 7 (Nougat) with no modifications.​
Basic steps are:
1. Unlock the bootloader
2. Flash TWRP
3. Flash SuperSU
4. Fix your BT/NFC (if you have issues)
5. There is extra instruction here as well for AdAway and V4A (Viper4Android)
Unlock the bootloader​
Follow this link to unlock your bootloader.
1. Go to Huawei's EMUI site and log in. If you need to create a new account, do so. Link here: http://www.emui.com/en/plugin/hwdownload/download
2. Click on the DOWNLOAD link at the top of the site.
3. Underneath the search field you will see a green link that says "Unlock Bootloader". Click it and follow the instructions. You will be asked to enter in several pieces of information about your phone.
4. Once you've filled out all the information, you will receive your unlock code at the bottom of the screen. Write this down and save it. This number will NEVER change.
5. On your Honor 8, go to Settings > About and tap on the Build Number seven times until you unlock the Developer Settings.
6. In Developer Settings, check Enable OEM Unlock.
7. Scroll down a bit more and check USB Debugging.
8. Go to Huawei's site and download their HiSuite and install it. This installs the OFFICIAL Honor 8 USB driver. Link here: http://consumer.huawei.com/minisite/..._en/index.html Once the app is installed, you can unselect start with Windows under settings.
9. Plug in your Honor 8 with the provided USB cable. Give it about 45 seconds to install the driver and recognize it. You may need to go to your phone and tap on "Allow File Access". You will be presented with a question asking if you'd always like to trust the computer you just connected to. Select yes, if this is your primary computer you will be working with.
10. Now download the most up to date ADB drivers. A Google employee has created one link to get that and make it easy. Link here: https://developer.android.com/studio...orm-tools.html
11. Open the zip file you just downloaded and create a folder on your computer easy to get to (I recommend c:\ADB) and paste those files there so they are extracted.
12. Now open the folder up in Windows Explorer if you closed it and hold down the Shift key and RIGHT click in the open area and click "Open command window here"
13. Type adb devices and hit enter. You should see a device ID as a response in the window.
14. Type adb reboot bootloader and hit enter. Give it a couple of seconds and the phone will load the bootloader.
15. Now type fastboot devices and hit enter. You should see your device ID appear again.
16. LAST CHANCE before it wipes everything and unlocks the booloader!!! Type fastboot oem unlock XXXXXXXXXX (where XXXXXXXXXX is the unlock code you received on step 4) and hit enter. It will ask if you're sure. Once this is done, the phone will wipe your data, unlock the phone and reboot. Your Honor 8's bootloader is now unlocked.
Click to expand...
Click to collapse
Flash TWRP​
Grab a working copy of TWRP here.
1. Download TWRP into the same folder you used in the steps above (where you're keeping all your files)
2. Navigate in Windows Explorer to this location and hold down the Shift key and RIGHT click in the open area and click "Open command window here"
3. Type adb devices and hit enter. You should see a device ID as a response in the window.
4. Type adb reboot bootloader and hit enter. Give it a couple of seconds and the phone will load the bootloader.
5. Now type fastboot devices and hit enter. You should see your device ID appear again.
6. Type fastboot flash recovery frd-twrp.img and hit enter.
7. Once this is complete, unplug your phone.
8. Hold Volume UP and Power at the same time. Release ONLY the Power button after the blue Honor logo appears.
9. You now are booted into TWRP and it's been successfully flashed.
Click to expand...
Click to collapse
Flash SuperSU​
Download the SuperSU SPECIFICALLY FOR NOUGAT here.
1. Boot into TWRP
2. Once there, when asked to keep system read only? - swipe to allow modifications
3. Tap Install
4. Tap Select Storage - Select your SD card
5. Select the supersu file "SuperSU-v2.79-201612051815-EMUI5.0.zip"
6. Swipe to confirm flash
7. Ignore the multiple errors: "Failed to mount '/data' (Invalid argument)
8. Go back to the main menu
9. Select Reboot to Recovery
10. When asked to keep system read only? - swiped to allow modifications (again)
11. Tap Wipe
12. Tap Format Data
13. Type YES then hit enter
14. It will format data using make_ext4fs..
15. When finished, tap Reboot System
16. Reboot back into TWRP
17. Swipe to allow modifications (You can check the box to never show this again)
18. Tap Install
19. Select storage
20. Select your SD card
21. Select the supersu file "SuperSU-v2.79-201612051815-EMUI5.0.zip"
22. Swipe to confirm flash
23. You should see NO ERRORS now when installing SuperSU
24. Wipe cache/dalvik
25. Swipe to wipe
26. Reboot system
Click to expand...
Click to collapse
Fix your BT/NFC (if you have issues)​
Some people are stating that after flashing this fix that they lose their keyboard. I'm throwing up a link here to get the latest GBoard.apk file.
Follow these instructions to fix BT/NFC issues.
This file is for the FRD-L04 ONLY.
Instruction for AdAway​
Follow these instructions to get AdAway working. This is only instruction, NOT where to download. I suggest F-Droid. Use Google.
Instruction for V4A (Viper4Android)​
Follow these instructions to get Viper working on Nougat.
How multiple people have successfully gone back to MM if they have too many issues with Nougat.​
Follow these instructions to get back to MM. Breathe.. it's actually not that bad at all.
You can find the OFFICIAL files to download on the Honor Support site located HERE.

Hi, i suggest removing the code tags and add the quote one instead so that people wont have to scroll down and scroll sideways too

Thanks for the sum-up! This thread gave me enough confidence to tweak my Honor8 on Nougat.
I'll try to get Adaway tonight, and will report any problems
EDIT: After flashing the update_data_full_hw_usa.zip to get BT and NFC, I only got NFC back. Can't turn on BT.
I reformated data to f2fs and reflashed supersu then update_data_full_hw_usa.zip but it's even worse, I don't have NFC. @joesee, any idea what went wrong?
=> considering a rollback now...

I already have 2 zips for viper which just needs to install and then set selinux to permissive and no struggle with installation if u have busy box
Sent from my NATASHA using Tapatalk

LastStandingDroid said:
I already have 2 zips for viper which just needs to install and then set selinux to permissive and no struggle with installation if u have busy box
Sent from my NATASHA using Tapatalk
Click to expand...
Click to collapse
Yeah, there were a lot of people including myself that had issues with that not working unless we renamed that audio_effects.conf file. To test, I even tried the standard apk file to try to install because I really hate the new EQ layout of the version 2.5. It is such a pain in the butt to scroll over just to adjust a frequency!

trainpunk said:
Hi, i suggest removing the code tags and add the quote one instead so that people wont have to scroll down and scroll sideways too
Click to expand...
Click to collapse
That's the one I was actually trying to do but I've never posted anything extravagant like that on here haha. Thanks!

takichiman said:
Thanks for the sum-up! This thread gave me enough confidence to tweak my Honor8 on Nougat.
I'll try to get Adaway tonight, and will report any problems
EDIT: After flashing the update_data_full_hw_usa.zip to get BT and NFC, I only got NFC back. Can't turn on BT.
I reformated data to f2fs and reflashed supersu then update_data_full_hw_usa.zip but it's even worse, I don't have NFC. @joesee, any idea what went wrong?
=> considering a rollback now...
Click to expand...
Click to collapse
Well I've went through this process three times myself back when I was trying to figure it out. There's at least two other threads that say the data partition needs formatted to f2fs. I don't know if the formatting of the data partition has anything to do with it or not to be honest because right now my data partition is ext4 and I don't have issues. Before you roll back, try doing a factory reset and just letting that process reformat on it's own and see if that resolves. If it does, I'll update the OP and just take that part out.
It was only put there because several people said that it was a better format and more efficient, so I'm not sure!

joesee said:
Well I've went through this process three times myself back when I was trying to figure it out. There's at least two other threads that say the data partition needs formatted to f2fs. I don't know if the formatting of the data partition has anything to do with it or not to be honest because right now my data partition is ext4 and I don't have issues. Before you roll back, try doing a factory reset and just letting that process reformat on it's own and see if that resolves. If it does, I'll update the OP and just take that part out.
It was only put there because several people said that it was a better format and more efficient, so I'm not sure!
Click to expand...
Click to collapse
After the factory reset, NFC is back, but BT cannot be turned on.
From what I understood, do I need to make sure to have an ext4 data partition to rollback to MM ?
Thanks for the answer

takichiman said:
After the factory reset, NFC is back, but BT cannot be turned on.
From what I understood, do I need to make sure to have an ext4 data partition to rollback to MM ?
Thanks for the answer
Click to expand...
Click to collapse
I had a conversation with the guy in this thread: https://forum.xda-developers.com/ho...ing-nougat-t3550015/post70859564#post70859564 While he says you really should - I didn't, and had no problems at all with it. Your mileage may vary.

joesee said:
I had a conversation with the guy in this thread: https://forum.xda-developers.com/ho...ing-nougat-t3550015/post70859564#post70859564 While he says you really should - I didn't, and had no problems at all with it. Your mileage may vary.
Click to expand...
Click to collapse
Okay thank you.
Just for information, it looks like my firmware version is now B320 while I had the B360 before. Probably due to the flashing of update_data_full_hw_usa.zip
Regarding the rollback procedure (which I'm doing for the 1st time), while everybody mention that i should put the dload folder in the sdcard, the huawei pdf document indicates that I should put it in the internal storage
Is huawei mistaken or am I mixing things?

takichiman said:
Okay thank you.
Just for information, it looks like my firmware version is now B320 while I had the B360 before. Probably due to the flashing of update_data_full_hw_usa.zip
Regarding the rollback procedure (which I'm doing for the 1st time), while everybody mention that i should put the dload folder in the sdcard, the huawei pdf document indicates that I should put it in the internal storage
Is huawei mistaken or am I mixing things?
Click to expand...
Click to collapse
Right now there's too many version of data full.zip, your's because of older version of full data.zip..
Just make sure its around 0.88mb for b360..

takichiman said:
Okay thank you.
Just for information, it looks like my firmware version is now B320 while I had the B360 before. Probably due to the flashing of update_data_full_hw_usa.zip
Regarding the rollback procedure (which I'm doing for the 1st time), while everybody mention that i should put the dload folder in the sdcard, the huawei pdf document indicates that I should put it in the internal storage
Is huawei mistaken or am I mixing things?
Click to expand...
Click to collapse
Either or will work for the dload folder. I've flashed both actually. Might be better to put it on the SD instead of internal so it's easier to format. Your choice, really.
Regarding the firmware versions, I think the OTA brought it up to 360 and that update data is a zip created from 320. Don't quote me on that, though.

joesee said:
Either or will work for the dload folder. I've flashed both actually. Might be better to put it on the SD instead of internal so it's easier to format. Your choice, really.
Regarding the firmware versions, I think the OTA brought it up to 360 and that update data is a zip created from 320. Don't quote me on that, though.
Click to expand...
Click to collapse
faizalotai said:
Right now there's too many version of data full.zip, your's because of older version of full data.zip..
Just make sure its around 0.88mb for b360..
Click to expand...
Click to collapse
Following what @faizalotai said, I will find a data update for the B360 and try and flash it and see what happens.

takichiman said:
Following what @faizalotai said, I will find a data update for the B360 and try and flash it and see what happens.
Click to expand...
Click to collapse
I'd be curious to know because I'm on b320 right now. I haven't tried making a backup of my current ROM yet. I hope it doesn't fail. I've never been able to backup MM.

joesee said:
I'd be curious to know because I'm on b320 right now. I haven't tried making a backup of my current ROM yet. I hope it doesn't fail. I've never been able to backup MM.
Click to expand...
Click to collapse
Sadly, it didn't work. I was in that case in which I have no keyboard, no apps and so on...
So I rollbacked to MM using Huawei's official packages.
If anyone needs the B360 data file, refer to this thread

takichiman said:
Sadly, it didn't work. I was in that case in which I have no keyboard, no apps and so on...
So I rollbacked to MM using Huawei's official packages.
If anyone needs the B360 data file, refer to this thread
Click to expand...
Click to collapse
Did you get BT back?

joesee said:
Did you get BT back?
Click to expand...
Click to collapse
Yes,
when rolling back to MM, I also noticed that TWRP was replaced by the stock recovery. I'm not yet certain but the bootloader is probably locked now.
I think I lost BT because i flashed a data zip prior to the firmware version I was using.
But I remain curious, I think i'll try to update to Nougat again and retry all of this again.

Please, link downloadable files directly. If You write a complete tutorial, the peoples won't need to read another one, to point a final link, where he at least download the suggested files.
Please, short this way.

For what it's worth, I only had to flash this file from TWRP to get the apps back and fix nfc and bt on my l04. It's the data file for the newest b360. http://update.hicloud.com:8180/TDS/...09/f1/full/hw/usa/update_data_full_hw_usa.zip
Oh, the keyboard wasn't working... So I texted myself my email and password from my lady's phone, copied and pasted that in to get into the Play Store, opened up my apps and installed my favorite keyboard. Now to mess it up some more...

Skeletor916 said:
For what it's worth, I only had to flash this file from TWRP to get the apps back and fix nfc and bt on my l04. It's the data file for the newest b360. http://update.hicloud.com:8180/TDS/...09/f1/full/hw/usa/update_data_full_hw_usa.zip
Oh, the keyboard wasn't working... So I texted myself my email and password from my lady's phone, copied and pasted that in to get into the Play Store, opened up my apps and installed my favorite keyboard. Now to mess it up some more...
Click to expand...
Click to collapse
Thanks for sharing this. I'll update the OP with the newer b360 data file. I'm curious what the difference is between b320 and b360. Wonder if it's worth the effort to try to upgrade.

Bosion BX-411 (Allwinner T3 QuadCore) Custom ROM [4.4.2] with Root

T3_P1 Custom Rom
FAC_Config: https://mega.nz/#!NkZxhA6Y!2dD0OHU1bxLSpWBZ5cixmGxSjIwXW6is7yUSeRY8FY4
MCU.bin: https://mega.nz/#!ZlhDxBRY!wH6LUPS0GHcNAv0EJs1nRhtjjfjcd9LPrlCfF2ntewI
T3_P1.img https://mega.nz/#!wkYxgRCD!Fo1jJ_auSpllPFjNcOy7_hky_B7CKHMG-qgzWEc0NwM
Root.zip https://mega.nz/#!V14QmLxa!FMw8MULUFS-kdHP_l3-pg6e_yCXf99JKyVcrtov9zBI
Changelog:
- Removed/Moved Bloatware to /system/BLOATWARE
-- ATV.apk (Analog TV => Who the **** watches TV in a car?)
-- AuxIn.apk (Analog Input => Input via Red-White-Cable? LOL)
-- BodaBluetooth.apk (BT-Streaming/Phone => Autostart, I hate it!)
-- BodaMusic.apk (Music Player => Autostart and doesn't play music from hidden SD Card!)
-- CanBusAirInfo.apk (WHAT?)
-- CanBusCarInfo.apk (WHAT?)
-- Chrome.apk (Webbrowser => I hate Chrome, Opera FTW)
-- Disc.apk (DVD Player? => I don't own a DVD Drive)
-- DTV.apk (Digital TV => Ha ha ha ha ...)
-- EasyConnected.apk (MirrorLink => Never worked!)
-- FileExplore.apk (FileManager => Worst FM ever!)
-- PreCamera.apk (Camera/ReverseCamera => Not connected... useless)
-- Radio.apk (Radio => I hate listening to unwanted songs!)
-- SWC.apk (SteeringWheelControl => Don't have a remote in my car to configure)
-- Torque_Pro.apk (OBD2 App => Piracy...)
-- VideoPlayer.apk (VideoPlayer => Who watch a video while driving?)
- Added Apps in /system/preinstall
-- BusyBoxV49.apk (Busybox installer/manager => Root App will love it!)
-- DabPlayer.apk (Digital Radio => Sounds cool?)
-- Easy_DPI_ChangerV3.1.9.apk (DPI Changer => Make your screen looks bigger/smaller)
-- GravityBoxKKV3.6.1.apk (GravityBox Xposed Modul => **** up your Head Unit like a real custom ROM!)
-- MX_PlayerV1.8.11.apk (Video Player => Better than the old one...)
-- MX_Player_Codec_ARMv7V1.8.12.apk (MX Player Codec)
-- MX_Player_Codec_ARMv7_NEONV1.8.12.apk (MX Player Codec)
-- Opera_MiniV21.0.2254.111920.apk (Webbrowser => Also removes Ads and useless Stuff)
-- RebootV2.0.5.apk (Reboot => To Recovery for Update, Shutdown, ...)
-- root.zip (Because I can... contains root for flashing)
-- SHOUTcastV1.apk (WebRadio => Best Radio app, used by Winamp!)
-- SuperBeamV4.1.3.apk (FileSharing => Share/Receive Files over Wifi! Because BT is slow...)
-- WazeV4.21.0.0.apk (Navigation => Better than iGO... but need Internet!)
-- XposedV2.6.1.apk (ROM ****ing App for everything!)
-- X_ploreV3.92.13.apk (FileManager => Better then FileExplore.apk with access to root!)
-- And the best part: You can uninstall some of these useless apps if you want =)
- Changed Boot Animation and Sound
- Recovery 'hacked', so you can use the touchscreen to control it
- You can install SuperSU (old Superuser.apk have to be deactived if SuperSU tries to uninstall it)
Bugs:
- MCU not deactived!
-- Every Android ROM wont be able to act/work freely due the MCU!
The problem is, if you look at the plan of the Allwinner T3 aka R40, you'll notice that many functions are connected to the MCU.
According to XDA-Developer, Android act here blind to things like Bluetooth or else, which means that if you need or want, you have to flash a hacked MCU.
But unfortunately, there aren't any for our MCU, it looks like BOSION have their own MCU.
So far, Bluetooth will only react to A2DP or devices with 'OBD' in their Name. There are some Modules for Xposed which CAN bypass or enhance some limitation,
but I don't know whether they really works with every MCU!
Also, the MCU does some usefull thing like dimming the light or giving you individual Volumne (Input Gain)
- Noise until you don't start any MCU-App (Radio, AuxIn, ...)
- Recovery still reboots after couple seconds or a minute, the boot.img obviously treis to prevent it (Boot.img swapped out once => Bootloop!)
- Sometimes the Buzzer activates itself?! (Probably due a Bug with Recovery/Boot.img? Happens randomly)
- ???
Installation Guide:
Video with bad quality and very stupid, oh my god and I never realized that...: https://www.youtube.com/watch?v=MEXaTXl2uIc
1. Burn T3_P1.img with PhoenixCard into a micro SD card(Windows 7 for best results, Windows 8+ cause random errors)
2. Copy root.zip into the micro SD card (smart would be to use another micro SD card or use the same micro sd card but please, format it first!)
3. Remove any micro SD cards from the head unit, also the hidden one behind the screen (just remove the 2 screws per side)
4. Insert the micro SD card into the from slot aka GPS-Slot and power on the head unit.
5. After flashing, remove the micro SD card and restart the head unit (Reset or power off/on)
6. Wait a bit, the system will reboot by itself to recovery.
7. If the head unit boot into recovery, quickly insert the micro SD card with 'root.zip' and install it from extsd/usbhost.
8. Due some restrictions in Boot.img, the system will try to boot the system, but then realizes that the recovery was flashing a zip and will stay in recovery!
9. Flash 'root.zip' again and if done, just reboot the system
10. Victory Sound, you have root!
FAQ? Yeah please but write me a personal message and I'll answer + add it here

I will flash my unit with your rom this weekend or before.
After reading your FAQ, watched the video and knowing that I'm reverting from Android 6, it's recommended to the install mcu.bin that you provided? HZBHDAndroidConfig.img is required to be installed?
Thank you!

Kazadorng said:
I will flash my unit with your rom this weekend or before.
After reading your FAQ, watched the video and knowing that I'm reverting from Android 6, it's recommended to the install mcu.bin that you provided? HZBHDAndroidConfig.img is required to be installed?
Thank you!
Click to expand...
Click to collapse
MCU.bin and FAC_Config were provided with this ROM, I can't modify something there so the best what you can do is use them.
Also it's better to flash them since you are reverting back to 4.4.2 and maybe something wont work well.

DrTrax said:
MCU.bin and FAC_Config were provided with this ROM, I can't modify something there so the best what you can do is use them.
Also it's better to flash them since you are reverting back to 4.4.2 and maybe something wont work well.
Click to expand...
Click to collapse
Can be flashed the root.zip file directly into the stock rom?

antonio2k said:
Can be flashed the root.zip file directly into the stock rom?
Click to expand...
Click to collapse
6. Wait a bit, the system will reboot by itself to recovery.
7. If the head unit boot into recovery, quickly insert the micro SD card with 'root.zip' and install it from extsd/usbhost.
8. Due some restrictions in Boot.img, the system will try to boot the system, but then realizes that the recovery was flashing a zip and will stay in recovery!
9. Flash 'root.zip' again and if done, just reboot the system
10. Victory Sound, you have root!

I am trying to enter recovery mode but I can not.
What steps do you follow?

antonio2k said:
I am trying to enter recovery mode but I can not.
What steps do you follow?
Click to expand...
Click to collapse
Just flash the firmware and wait until the preinstallation is done, the system will reboot itself ONLY ONE TIME to recovery (also only one time to prevent any bootloops or if someone don't want having root)
If you missed the recovery part, then you have to flash again or you could take a "little" bit of patience and try gain root with 360root.
Sry

DrTrax said:
Just flash the firmware and wait until the preinstallation is done, the system will reboot itself ONLY ONE TIME to recovery (also only one time to prevent any bootloops or if someone don't want having root)
If you missed the recovery part, then you have to flash again or you could take a "little" bit of patience and try gain root with 360root.
Sry
Click to expand...
Click to collapse
Can not be accessed with a buttons combination?
Something like that:
1. Hold RST button and POWER at the same time.
2. Wait 5 seconds.
3. Release RST button and wait 5 seconds.
4. Release POWER.

antonio2k said:
Can not be accessed with a buttons combination?
Something like that:
1. Hold RST button and POWER at the same time.
2. Wait 5 seconds.
3. Release RST button and wait 5 seconds.
4. Release POWER.
Click to expand...
Click to collapse
Not sure, you can try but I think that recovery were disable in that way, that bosion disabled the touchscreen in the boot.img

I will try!!! In the meantime maybe you can help me...in my bx411 there is not the logo select apk...is there any solution?

davidebeatrice said:
I will try!!! In the meantime maybe you can help me...in my bx411 there is not the logo select apk...is there any solution?
Click to expand...
Click to collapse
Check in the image folder. U will find the logo images, open the image you want and check in its options, you will see use as startup image.
You are welcome

kasafex2000 said:
Check in the image folder. U will find the logo images, open the image you want and check in its options, you will see use as startup image.
You are welcome
Click to expand...
Click to collapse
Thanks mate! thats what i was searching for!!

Great work DrTrax. Is this method also compatible with Bosion BX-412? I think it is the same devices are only that 412 has a CD slot.
Greetings Alex

I was hoping if someone on the blog can get me the Full .apk for
Bosion BX-411 T2. There is lots of people on this blog with this Stereo. Use Root Browser and grab the folder or all folders.
Kernel Version
Linux 3.4.39 - Sat May 28 14:13:57 CST 2016
OS Version
Android v4.4 - BSP 1.15 - 20160531
APP Version
APP 1.15

Is the rom in english or can I change the language after installing?

Bluetooth
Hi first thank you very much for the share you save my day (sorry my english im portuguese) i cant find where to conect the bluetooth can you help me?

Help...my HU BX411 ? I was update to firmware 20170408 (Bosion - GOC Bluetooth)everything its ok but stil reboot when turn on car engine...I have tried to install 20170715 (MCU) it turns to bad sound ... then I install back again to mcu 20170408 (Bosion - GOC Bluetooth) but my head unit suddenly totally dead... No black screen like shutdown but can't turn on... If this can be fixed?.. What should be doing master?? thank very much

7. If the head unit boot into recovery, quickly insert the micro SD card with 'root.zip' and install it from extsd/usbhost.
# At which Point shall I insert the card? In the step before i´ve power cycled the device, is it possible to insert the Card before power on? What is visible on the Display at the Point you are expecting to insert?
8. Due some restrictions in Boot.img, the system will try to boot the system, but then realizes that the recovery was flashing a zip and will stay in recovery!
# I´ve got the recovery dialog and tryed to select "...extsd" but nothing happend.
(I´ve formated SD as FAT32. Is this correct or shall i do it also with PhoenixCard as the Image file?)
9. Flash 'root.zip' again and if done, just reboot the system
Do you mean that I shall do it a 2nd time via the recovery dialouge?
Tnx 4 Help
Joe

Alfistagt said:
Is the rom in english or can I change the language after installing?
Click to expand...
Click to collapse
Yes, its possible in Language-Settings

Hi all, I own same device- quadcore bosion. And or course i have some problems with it. after just maybe some days of use, some of the built in apps stopped working. The icons still exist but nothing happens when I touch them. For example radio, equalizer, music player, auxin, BT music- in fact I cant use Bluetooth at all, it just doesnt search for the devices. And the top two buttons stopped working on the left side- power and back. volume works ok. After contacting the seller he sent me some "updates" from which is nothing better, just the same.
But still, I can download apps for everything, that stopped working, but still I would like to have bluetooth at least.
So I tried with this ROM but it is still the same, buttons, bluetooth and some apps that were left on ROM. So is problem software or maybe some hardware issue? I have to say that it happened the same once but it just went to normal the next day. But now nothing.
So what do you guys think of this? if there is no software to fix it I am just gonna use it as it is.
And thanks for all the work here and help.

Need Android 10 Model: px5 MTCU_HT Custom Firmware

Hey there
My Head Unit is no longer saving the last used memory and the radio just stopped working this week.
I am looking for custom firmware to try and hopefully get my unit working properly.
I have searched online and with not a lot of luck. I found someone with custom Firmware on Youtube
but I have used his firmware on another unit a few years back and you can't turn off the auto screen saver option
so I would rather not use his firmware again.
Any Help?
My specs:
Pumpkin Android Radio
Model: px5 (1024 x 600)
Android Version: 10
Last security Update: 5. May 2020
Build NUmber: rk3368-userdebig 10
Kernel-Version: 4.19.111
MCU-Version: MTCU_HT_V3.71_1 Dec 19 2020
CPU: Octa-core Cortex-A53 @ 1.5G
Memory: 3937 MB
I hope someone can help
Thank you in advance.

The file I uploaded is the firmware update the seller sent to me.
Seller instructions:
Update methods:
Download the link on your computer--Don’t unzip the file update.zip. Copy this file " update.zip" to the USB root directory. Connect the USB stick to the USB port of the radio. If the radio detects the update immediately and wants to install it, click on Cancel.
Then open Settings> System> System Updates> tick the box > click Install.
I installed it all Okay. Still have the same problems.
I also found this firmware
Hal9k_Mod_5.0_MTCx_HCTx_PX5_eng.rar
From
And it also installed Okay. Looks very different (I don't really like it that much, far too bright) however I still have the same problems.
I am starting to think it's a hardware problem.
I will post back after trying something else.

techno489 said:
Factory yhss1_PX5-A10-rk3368-MTCU_HT(20211111).zip
Click to expand...
Click to collapse
This firmware is based on the custom firmware of "Factory yhss1_PX5-A10-rk3368-MTCU_HT(20211111)"
Яндекс
Найдётся всё
disk.yandex.ru

techno489 said:
The file I uploaded is the firmware update the seller sent to me.
Seller instructions:
Update methods:
Download the link on your computer--Don’t unzip the file update.zip. Copy this file " update.zip" to the USB root directory. Connect the USB stick to the USB port of the radio. If the radio detects the update immediately and wants to install it, click on Cancel.
Then open Settings> System> System Updates> tick the box > click Install.
I installed it all Okay. Still have the same problems.
I also found this firmware
Hal9k_Mod_5.0_MTCx_HCTx_PX5_eng.rar
From
And it also installed Okay. Looks very different (I don't really like it that much, far too bright) however I still have the same problems.
I am starting to think it's a hardware problem.
I will post back after trying something else.
Click to expand...
Click to collapse
You even did not tell anything about your issues you are facing. What do you mean with:
My Head Unit is no longer saving the last used memory and the radio just stopped working this week.
Click to expand...
Click to collapse
So really think about that and communicate correctly.
The same would be if you call your workshop that your car does something wrong and don´t tell them what happens.
Would you get any instructions? I think not.
So tell us the issues and then thee might be some answer possible.
@localos : I think just pushing links to any firmware version without having a bug report does not make any sense.

Help Requested: Bought a TS10. Sub Pre-out stopped working after S/W Update to TS10.2.2_20230311.103922

Greetings!
I bought a radio for my car. Everything was working out of the box yesterday. I did a S/W update this morning and updated to TS10.2.2_20230311.103922 this morning. As soon as I did that, the sub pre-outs went completely dead. I did test my amp and everything downstream is getting power. I don't know what happened. The update was successful. I don't know what the previous software version was before updating.
I have no idea how to fix this. What should I do?

Hi, request an update offline from your seller (install thru USB stick) or go to factory settings menu and restore original software - downgrade (this will delete all files and folders created after first use and put clean install)

Duplicate post.

Anton TNT said:
Hi, request an update offline from your seller (install thru USB stick) or go to factory settings menu and restore original software - downgrade (this will delete all files and folders created after first use and put clean install)
Click to expand...
Click to collapse
The seller told me not to perform a factory reset because it'll delete the APK and map files. How would I get those back?
Update: I performed the factory update. I found the "APK Installer" on the radio. I was able to install TLlink, and a few other ones.
Thank you!

marker227 said:
The seller told me not to perform a factory reset because it'll delete the APK and map files. How would I get those back?
Update: I performed the factory update. I found the "APK Installer" on the radio. I was able to install TLlink, and a few other ones.
Thank you!
Click to expand...
Click to collapse
Is it working all well now ?

Anton TNT said:
Is it working all well now ?
Click to expand...
Click to collapse
Actually no. It's so much much worse. The headlight illumination wire never worked (before or after update). And now the sub pre-outs do not work in TLink. They do work in Bluetooth or the Radio. That's it. I worked on the car for 3 hours last night. I did numerous factory resets. I can't get it to work right.

Please post here info on system - HMI and MCU take a picture and whole device also. Must know what we are dealing with here.
We will find solution, we always do...
Meanwhile this thread will also help things sort out ... https://forum.xda-developers.com/t/new-ts10-uis7862-6gb-ram-128gb-head-unit-q-as.4227947/page-91

Anton TNT said:
Please post here info on system - HMI and MCU take a picture and whole device also. Must know what we are dealing with here.
We will find solution, we always do...
Meanwhile this thread will also help things sort out ... https://forum.xda-developers.com/t/new-ts10-uis7862-6gb-ram-128gb-head-unit-q-as.4227947/page-91
Click to expand...
Click to collapse
Thank you! I can let you know this information tomorrow! I don't have access to the car right now. The radio was from AliExpress. I'm on Android 10. The radio is called the T9 version. I did post on that Q&A post too.
I had issues where the amp remote wire was not being turned on by the radio (power cycle with a paperclip fixed that).
Now I'm having issues with the sub not providing any audio while using TLlink. The speakers even sound really awful when using TLlink.
I also accidentally flipped the boot logo screen for the Android logo. Not sure how to put it back the way it was...
The seller did give me this file: "TS10.2.2_20230311.103922_THEME1-11.rar" I'm not exactly confident this will do anything when the Factory Reset didn't.

marker227 said:
Thank you! I can let you know this information tomorrow! I don't have access to the car right now. The radio was from AliExpress. I'm on Android 10. The radio is called the T9 version. I did post on that Q&A post too.
I had issues where the amp remote wire was not being turned on by the radio (power cycle with a paperclip fixed that).
Now I'm having issues with the sub not providing any audio while using TLlink. The speakers even sound really awful when using TLlink.
I also accidentally flipped the boot logo screen for the Android logo. Not sure how to put it back the way it was...
The seller did give me this file: "TS10.2.2_20230311.103922_THEME1-11.rar" I'm not exactly confident this will do anything when the Factory Reset didn't.
Click to expand...
Click to collapse
Please send me this file TS10.2.2_20230311.103922_THEME1-11.rar on email [email protected].
Will try out with my unit I have TS18.
It has obviously theme pack for changing theme or UI of device.
Boot logo is minimal concern. Boot logo can be changed in factory settings mode (access with pin code ussualy 8888 or 126 or 123456).
Please do also :
Paste here also link of Ali Express where you bought device just to see some further info on device.
Take a snapshot of units UI (main interface with icons in Android).
Specify what brand is it - like Topway, Isudar, Mekede, Joying or something like that.

Anton TNT said:
Please send me this file TS10.2.2_20230311.103922_THEME1-11.rar on email [email protected].
Will try out with my unit I have TS18.
It has obviously theme pack for changing theme or UI of device.
Boot logo is minimal concern. Boot logo can be changed in factory settings mode (access with pin code ussualy 8888 or 126 or 123456).
Please do also :
Paste here also link of Ali Express where you bought device just to see some further info on device.
Take a snapshot of units UI (main interface with icons in Android).
Specify what brand is it - like Topway, Isudar, Mekede, Joying or something like that.
Click to expand...
Click to collapse
I sent you an email with a link containing the .rar file the seller gave me. It is the current software version for the radio. I asked them to provide me with the original firmware file they send with the radio as well. I'll get that tomorrow.
Here is the photo you requested.
It is running Android 10. Although, it's supposed to be Android 11. I don't have canbus on my vehicle or a factory digital amp.
I tried plugging my phone into the USB plug in the back of the radio. It didn't connect to the radio. It briefly was charging, but I was unable to use Android Auto using the wired method. I don't have the car's factory USB plug hooked up right now. I'll be doing that on Saturday. Is it possible the rear USB plugs don't provide data to the radio? The rear USB plug is 6-pin. The car's factory front plug is 4-pin.
https://www.aliexpress.us/item/3256802326561600.html?spm=a2g0o.order_list.order_list_main.17.ccc01802QkG7Tx&gatewayAdapt=glo2usa&_randl_shipto=US

Did you get any canbus box with device ?
If yes, is it readable / visible in system settings (factory settings)?

Anton TNT said:
Did you get any canbus box with device ?
If yes, is it readable / visible in system settings (factory settings)?
Click to expand...
Click to collapse
No I did not. Since my car does not have the upgraded audio system, no canbus was needed. I was not given one.

Your file that you have sent me... It is update for unit , go to in system update where you updated software and choose not online but "local" update and then choose USB (ZIP file - files must be unzipped on formatted USB drive and attched to port prior to hit update). Let it finish and then see if helped. If not I'm looking for same update on net, we have similar device I have TS18 yours is TS10.
There is a link to help if get stuck...

Anton TNT said:
Your file that you have sent me... It is update for unit , go to in system update where you updated software and choose not online but "local" update and then choose USB (ZIP file - files must be unzipped on formatted USB drive and attched to port prior to hit update). Let it finish and then see if helped. If not I'm looking for same update on net, we have similar device I have TS18 yours is TS10.
There is a link to help if get stuck...
Click to expand...
Click to collapse
How do I send the file to the unit? The 6-pin USB port does not detect my phone. My phone briefly detects power and then it goes off.

marker227 said:
How do I send the file to the unit? The 6-pin USB port does not detect my phone. My phone briefly detects power and then it goes off.
Click to expand...
Click to collapse
Send file to USB drive on a cmputer rather than from phone. Send this zip file to a computer via mobile phone bluetooth or cable connection unzipp the files, then transfer files to formatted USB drive, attach it to USB port on head unit, go to system settings and choose local update / USB and it should start the update. It is best method.

Anton TNT said:
Send file to USB drive on a cmputer rather than from phone. Send this zip file to a computer via mobile phone bluetooth or cable connection unzipp the files, then transfer files to formatted USB drive, attach it to USB port on head unit, go to system settings and choose local update / USB and it should start the update. It is best method.
Click to expand...
Click to collapse
I have USB drives at home. I can do this in about 6 hours.

marker227 said:
I have USB drives at home. I can do this in about 6 hours.
Click to expand...
Click to collapse
Go ahead no need to hurry, it's late.. You can tell me if you succeded tommorow... Good luck!

Original update is here but it's from year 2021... use as a last resort, I have not tested it.
https://forum.xda-developers.com/t/...am-128gb-head-unit-q-as.4227947/post-84743245
Method of installment, same as update above from USB and local update

I put the RAR file on a USB stick. How do I apply the update?
I'm unzipping the files... Trying again.

Anton TNT said:
Original update is here but it's from year 2021... use as a last resort, I have not tested it.
https://forum.xda-developers.com/t/...am-128gb-head-unit-q-as.4227947/post-84743245
Method of installment, same as update above from USB and local update
Click to expand...
Click to collapse
Performing the update now. Am I supposed to check the "Wipe data and format flash button?" I didn't check it.
I finished the update. It didn't do anything. My subwoofer is still broken and none of my settings were wiped.
I tried the update again and I clicked the "Wipe Data" button. Same result.
I do have the original file the seller gave me. It's the older firmware version. I haven't tried that, but I'm getting annoyed at this point. I thought a flash was going to completely wipe the radio, including the crooked boot logo I accidentally flipped.
This is the oldest file the seller gave me. I haven't tried it yet.
TS10.2.2_20230210.093416_THEME1-11.rar