This took me way too long to figure out so Hopefully this will make it quicker for someone:
OnePlus Help Page
Dr. Mario said:
fastboot oem get_unlock_code
Click to expand...
Click to collapse
(Found ten pages in at https://forum.xda-developers.com/t/t-mobile-bootloader-unlock.4181339/page-10#post-83922873)
Once you have the unlock code go to: One Plus Unlock Token Page
If your phone does not show up in fastboot and you are on windows 10: https://forum.xda-developers.com/t/guide-fix-device-not-showing-up-in-fastboot-mode-windows-10.4194491/
The drivers will not install in windows 10 unless you Disable driver signing enforcement first.
In case you did not know, your phone comes with driver installation software that will show up when you plug your phone into your computer. However, if you have USB debugging turned on first, they will not pop up.
This is all basic stuff, but some times people need help with the basics!
(edited for clarity)
-----------------------------------------------------------------------------------------------------------
Edited to add the following next step
One week later (pretty much to the second) go back to: One Plus Unlock Token Page (you should also get an e-mail with a link. Download the file unlock_code.bin and place it in the same directory you will be running fastboot from.
Don't forget that if you continue past this point you will wipe your phone and have to go through the setup process again. Your phone will also ask for confirmation of this.
Also, as of 11.0.4.6.KB09CB continuing will change your widevine to L3.
Open a command prompt or terminal window and run the following:
adb reboot bootloader
fastboot flash cust-unlock unlock_code.bin
fastboot flashing unlock
------------------------------------------------------------
To Root:
Rooting instructions
However, if you have USB debugging turned on first, they will not pop up.
Click to expand...
Click to collapse
Thats good tip! I never have USB debugging turned off before 1st connection...
ALSO,
There are differences between
FASTBOOTD
AND
FASTBOOT
How long do they send the token
Can this be done with a temporary sim unlock?
jefffeely said:
This took me way too long to figure out so Hopefully this will make it quicker for someone:
OnePlus Help Page
(Found ten pages in at https://forum.xda-developers.com/t/t-mobile-bootloader-unlock.4181339/page-10#post-83922873)
Once you have the unlock code go to: One Plus Unlock Token Page
If your phone does not show up in fastboot and you are on windows 10: https://forum.xda-developers.com/t/guide-fix-device-not-showing-up-in-fastboot-mode-windows-10.4194491/
The drivers will not install in windows 10 unless you Disable driver signing enforcement first.
In case you did not know, your phone comes with driver installation software that will show up when you plug your phone into your computer. However, if you have USB debugging turned on first, they will not pop up.
This is all basic stuff, but some times people need help with the basics!
(edited for clarity)
-----------------------------------------------------------------------------------------------------------
Edited to add the following next step
One week later (pretty much to the second) go back to: One Plus Unlock Token Page (you should also get an e-mail with a link. Download the file unlock_code.bin and place it in the same directory you will be running fastboot from.
Don't forget that if you continue past this point you will wipe your phone and have to go through the setup process again. Your phone will also ask for confirmation of this.
Also, as of 11.0.4.6.KB09CB continuing will change your widevine to L3.
Open a command prompt or terminal window and run the following:
adb reboot bootloader
fastboot flash cust-unlock unlock_code.bin
fastboot flashing unlock
------------------------------------------------------------
To Root:
Rooting instructions
Click to expand...
Click to collapse
This is horrible T-Mobile Tech had no idea what 64 digit code i needed to unlock bootloader told me to contact one plus they told me to contact T-Mobile Technician so the rep put me in touch with a tech from Metro Pcs who said my imei is T-Mobile not Metro and hung up on me Its a never ending battle i need to find a Factory Unlocked Nord 10 5g if i want to root i do like the the stock rom Oxygen but i never owned a phone before that wasn't rooted I have now 4 of these Phones if anyone has a factory unlocked nord 10 5g willing to sell or barter with me as i have a bunch of cellphones please contact me or if you work for T-mobile and can get me this code i need for the token please contact me Thanks
superbart007 said:
Can this be done with a temporary sim unlock?
Click to expand...
Click to collapse
No, requires permanent. Talk to TMobile support on Twitter and tell them you use your phone for development purposes.
Okay I know this is stupid, but since it takes a freaking week (I thought I'd sit down and flash Lineage "real quick"...joke's on me), does the OnePlus site want everything on BOTH lines of that unlock code section, appended together as one long string? Or is that two separate codes?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
matt314159 said:
Okay I know this is stupid, but since it takes a freaking week (I thought I'd sit down and flash Lineage "real quick"...joke's on me), does the OnePlus site want everything on BOTH lines of that unlock code section, appended together as one long string? Or is that two separate codes?
View attachment 5537469
Click to expand...
Click to collapse
Just flash my EU conversion, update to the latest stable OOS, then go lineage away and forget this nonsense unlock.bin.
But to answer your question: Copy both lines as 1 line without any breaks or spaces. Then enjoy waiting 2 weeks for the code, if the website decides to work at all.
craznazn said:
Just flash my EU conversion, update to the latest stable OOS, then go lineage away and forget this nonsense unlock.bin.
But to answer your question: Copy both lines as 1 line without any breaks or spaces. Then enjoy waiting 2 weeks for the code, if the website decides to work at all.
Click to expand...
Click to collapse
Thanks! Yep, in the end that's what I did. Flashed international FW with the MSM tool, then unlocked the bootloader without waiting for the token. Then spent about two more hours troubleshooting a bunch of unrelated stuff due to some user error, but in the end, landed with the phone on LOS 18.1 so I'm happy.
jefffeely said:
This took me way too long to figure out so Hopefully this will make it quicker for someone:
OnePlus Help Page
(Found ten pages in at https://forum.xda-developers.com/t/t-mobile-bootloader-unlock.4181339/page-10#post-83922873)
Once you have the unlock code go to: One Plus Unlock Token Page
If your phone does not show up in fastboot and you are on windows 10: https://forum.xda-developers.com/t/guide-fix-device-not-showing-up-in-fastboot-mode-windows-10.4194491/
The drivers will not install in windows 10 unless you Disable driver signing enforcement first.
In case you did not know, your phone comes with driver installation software that will show up when you plug your phone into your computer. However, if you have USB debugging turned on first, they will not pop up.
This is all basic stuff, but some times people need help with the basics!
(edited for clarity)
-----------------------------------------------------------------------------------------------------------
Edited to add the following next step
One week later (pretty much to the second) go back to: One Plus Unlock Token Page (you should also get an e-mail with a link. Download the file unlock_code.bin and place it in the same directory you will be running fastboot from.
Don't forget that if you continue past this point you will wipe your phone and have to go through the setup process again. Your phone will also ask for confirmation of this.
Also, as of 11.0.4.6.KB09CB continuing will change your widevine to L3.
Open a command prompt or terminal window and run the following:
adb reboot bootloader
fastboot flash cust-unlock unlock_code.bin
fastboot flashing unlock
------------------------------------------------------------
To Root:
Rooting instructions
Click to expand...
Click to collapse
I have done everything that I am suppose to and I will say this is the not the first phone I have rooted however I will say this is by far the most difficult. Now with that being said, have you or did you run into the error telling you to enter a valid IMEI. I know mine is correct T-Mobile verified it with me several times when they were so kind to network unlock my phone the same day I bought it. Any advice or suggestions would be appreciated.
a
Anyone have the conversion zip????
My problem is that my phone shipped with an incomplete serial number. The oneplus token website calls for an 8 digit serial but I only have 7 digits. OnePlus 9 Pro 5G from T-Mobile. Oneplus tech said I needed to add a 0 on the front end, but if I do that then the unlock code through ADB will not match to the change. Therefore my information is incorrect. I am in touch with Oneplus, but wish there was a third party token generator for my current details. Not sure if I have any other options. Grrrr!
TheGhost1951 said:
My problem is that my phone shipped with an incomplete serial number. The oneplus token website calls for an 8 digit serial but I only have 7 digits. OnePlus 9 Pro 5G from T-Mobile. Oneplus tech said I needed to add a 0 on the front end, but if I do that then the unlock code through ADB will not match to the change. Therefore my information is incorrect. I am in touch with Oneplus, but wish there was a third party token generator for my current details. Not sure if I have any other options. Grrrr!
Click to expand...
Click to collapse
Convert to EU via MSM, unlock bootloader with no unlock.bin
craznazn said:
Convert to EU via MSM, unlock bootloader with no unlock.bin
Click to expand...
Click to collapse
Thank you, will look into the conversion.
matt314159 said:
Thanks! Yep, in the end that's what I did. Flashed international FW with the MSM tool, then unlocked the bootloader without waiting for the token. Then spent about two more hours troubleshooting a bunch of unrelated stuff due to some user error, but in the end, landed with the phone on LOS 18.1 so I'm happy.
Click to expand...
Click to collapse
Hello there can you help me out with The OnePlus 8 t mobile it's locked and OEM is grey.. I talked to t mobile .. and I don't have a t mobile account since I live in Pakistan.
It's carrier locked and it's t mobile firmware ..
Please guide me how can I fix it
My mail: [email protected]
Thanks
.
craznazn said:
Just flash my EU conversion, update to the latest stable OOS, then go lineage away and forget this nonsense unlock.bin.
But to answer your question: Copy both lines as 1 line without any breaks or spaces. Then enjoy waiting 2 weeks for the code, if the website decides to work at all.
Click to expand...
Click to collapse
Hey there, maybe you could help with how to unlock bootloader without the token?
i'm on international firmware.
I did just submit my token to oneplus but would rather not wait.
Do i need something else?
thanks!!
hugh288 said:
Hey there, maybe you could help with how to unlock bootloader without the token?
i'm on international firmware.
I did just submit my token to oneplus but would rather not wait.
Do i need something else?
thanks!!
Click to expand...
Click to collapse
Shouldn't need the token on international firmware. A simple fastboot oem unlock should do it. Just be sure you have OEM unlocking enabled under developer options.
hugh288 said:
Hey there, maybe you could help with how to unlock bootloader without the token?
i'm on international firmware.
I did just submit my token to oneplus but would rather not wait.
Do i need something else?
thanks!!
Click to expand...
Click to collapse
If you converted via MSM, you don't need an unlock code.
craznazn said:
If you converted via MSM, you don't need an unlock code.
Click to expand...
Click to collapse
I did try to fastboot oem unlock but it says I need the token.
hugh288 said:
I did try to fastboot oem unlock but it says I need the token.
Click to expand...
Click to collapse
Are you on OOS12? If so, then yeah you do need it.
If you just flash the conversion, you can unlock it then upgrade to OOS12
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you got result above when official unlocking your phone, here is my solution for this.
No MiFlashTool needed. I'm not sure 32-bit Windows works, but it should, tested on Windows 10 64-bit with 10 years old hardware
This only fix: Couldn't verify device "Current account is different from the account info on the device"
YOUR DEVICE WILL BE WIPED, BACKUP EVERYTHING
First: (what you need)
- You have to login account that have permission to unlock.
- Enable find device, lock, etc... (everything that help security)
- Reliable, stable Wi-Fi connection.
- Xiaomi Driver (I recommended install Mi PC Suite), plug your phone with Mi PC Suite running, if it recognize your phone, you are good to go.
Next step:
- Download latest DEVELOPER ROM on MIUI homepage. I use GLOBAL DEV but CHINESE DEV should work too.
- Copy it to INTERNAL STORAGE put it in downloaded_rom folder (create it if it not there) (DON'T USE EXTERNAL STORAGE, your phone will reboot like nothing happened)
- Use Updater app and browse to DEV ROM file.
- Updater app will ask you to confirm that everything will be wipe and you should probably backup everything.
- Updating will take about 10-20 minutes.
Another next step:
- You will be asked to enter password for the account that you logged in before update, enter and wait till everything is okay.
- Login to Google Play isn't necessary.
- Reboot to Fastboot screen (Volume Down + Power or "adb reboot fastboot" if you have adb on your PC)
- Run official unlock tool, login with the account on your phone.
- Plug your phone (which is in Fastboot mode right now).
- Click unlock and your phone will be unlocked in 15 seconds.
- Your phone will reboot and enjoy unlocked bootloader.
Last but not least: Checking your phone unlocked or not. (you will need adb and fastboot for this)
- Boot to Fastboot (manually or command: "adb reboot fastboot")
- Use command: fastboot oem device-info
- If "Device unlocked: true" that means your phone is unlocked.
P/s: Sorry for my broken English
when i choose the developer rom it shows "could not verify package" !!
this is not a fix
The problem lies with Mi Servers
If there's a mismatch of your details on your local device and server, you will get unable to verify error
No matter which rom you try, u going to get the same error
BTW i unlocked on global stable, i had the same issue for like 15days and finally contacted one MIUI device team member he refreshed my details in the server and boom, my device got unlocked
T/[email protected]$ said:
when i choose the developer rom it shows "could not verify package" !!
Click to expand...
Click to collapse
Check archive file with WinRAR or 7z, it may corrupted.
Harish_Kumar said:
this is not a fix
The problem lies with Mi Servers
If there's a mismatch of your details on your local device and server, you will get unable to verify error
No matter which rom you try, u going to get the same error
BTW i unlocked on global stable, i had the same issue for like 15days and finally contacted one MIUI device team member he refreshed my details in the server and boom, my device got unlocked
Click to expand...
Click to collapse
If it's lies from Mi servers, then I know what is happening.
My method would help when it contact to Mi server and tell it: "This account logged in to this device, update it to your database". Basically, it "Find device" function will talk to Mi servers to update.
Yeah, any method that make Mi server update will help.
Archmage1809 said:
Check archive file with WinRAR or 7z, it may corrupted.
If it's lies from Mi servers, then I know what is happening.
My method would help when it contact to Mi server and tell it: "This account logged in to this device, update it to your database". Basically, it "Find device" function will talk to Mi servers to update.
Yeah, any method that make Mi server update will help.
Click to expand...
Click to collapse
I have tried that find device stuff, it didnt work
The method is to go to i.mi.com
Login to your account
and enable your mobile number by clicking find device
It didnt work, then i have to contact that guy
Harish_Kumar said:
I have tried that find device stuff, it didnt work
The method is to go to i.mi.com
Login to your account
and enable your mobile number by clicking find device
It didnt work, then i have to contact that guy
Click to expand...
Click to collapse
Well, I have been trying the same thing and basically what he says is true. I tried on all types of roms, until I flashed the latest China Dev (gflobal would prolly work too) rom and tried it again and it worked instantly. So, I dunno what it is, but going to China Dev rom and then trying it fixed it for me instantly.
Harish_Kumar said:
I have tried that find device stuff, it didnt work
The method is to go to i.mi.com
Login to your account
and enable your mobile number by clicking find device
It didnt work, then i have to contact that guy
Click to expand...
Click to collapse
My issue is when I request for unlocking they send me a SMS with different Mi Account ID which does not match with my device Mi Account ID write down several mails but problem persists every time the same.
can you plz let me know to whom to contact regarding the issue.
Thanks in advance
Triggered from my Nexus 10
Harish_Kumar said:
this is not a fix
The problem lies with Mi Servers
If there's a mismatch of your details on your local device and server, you will get unable to verify error
No matter which rom you try, u going to get the same error
BTW i unlocked on global stable, i had the same issue for like 15days and finally contacted one MIUI device team member he refreshed my details in the server and boom, my device got unlocked
Click to expand...
Click to collapse
To whom you contacted, can you give me his details and how can I contact, because I have done all those things mentioned here and there none helps.
Thankyou in advance
All guides and solutions on mi forums and elsewhere are useless. Nothing works.
Seems @Harish_Kumar did not want to disclose anything.
Triggered from rn3
This does not works tried it my self.
Sent from my Nexus 6P using Tapatalk
amitroutray said:
Seems @Harish_Kumar did not want to disclose anything.
Triggered from rn3
Click to expand...
Click to collapse
Sorry, i have been busy these days
I was trying to find that one specific thread on MIUI forum where i contacted that MIUI device team member (his name is naseer - not exactly sure) and i was asked my MI account ID , OS version, device info and he got it fixed within 48 hours
http://en.miui.com/forum-64-1.html
One of the threads in the above link, this happened like around May last week so its been quite few days couldnt exactly find that thread
@Harish_Kumar can you tell me what was your user ID on that forum??
Triggered from rn3
today morning i unlocked my rn3 .. moved to global stable 7.5.3 to global dev rom 6.8.11 via updater and tried to unlock... and boom its unlock in 1st attempt...(sorry for my bad english)
hadiyalkishan said:
today morning i unlocked my rn3 .. moved to global stable 7.5.3 to global dev rom 6.8.11 via updater and tried to unlock... and boom its unlock in 1st attempt...(sorry for my bad english)
Click to expand...
Click to collapse
When did you get the SMS? I received my confirmation SMS before 5 days or so.
MakDroid said:
When did you get the SMS? I received my confirmation SMS before 5 days or so.
Click to expand...
Click to collapse
before 8 days.
Harish_Kumar said:
this is not a fix
The problem lies with Mi Servers
If there's a mismatch of your details on your local device and server, you will get unable to verify error
No matter which rom you try, u going to get the same error
BTW i unlocked on global stable, i had the same issue for like 15days and finally contacted one MIUI device team member he refreshed my details in the server and boom, my device got unlocked
Click to expand...
Click to collapse
which member you contacted
---------- Post added at 11:54 PM ---------- Previous post was at 11:53 PM ----------
hadiyalkishan said:
today morning i unlocked my rn3 .. moved to global stable 7.5.3 to global dev rom 6.8.11 via updater and tried to unlock... and boom its unlock in 1st attempt...(sorry for my bad english)
Click to expand...
Click to collapse
how you go to dev 6.8.11 via updater? i cant see and miui8 rom in updater
ilvmyname said:
To whom you contacted, can you give me his details and how can I contact, because I have done all those things mentioned here and there none helps.
Thankyou in advance
Click to expand...
Click to collapse
amitroutray said:
Seems @Harish_Kumar did not want to disclose anything.
Triggered from rn3
Click to expand...
Click to collapse
I mailed on "[email protected]" regarding the issue with screenshot and MiUnlockTool log. Let's see what happnes. :fingers-crossed::fingers-crossed:
Hopefully it will get fixed asap
Also you can leave comment in this Mi forum thread for the same --> http://en.miui.com/thread-202290-1-1.html
bravonova said:
I mailed on "[email protected]" regarding the issue with screenshot and MiUnlockTool log. Let's see what happnes. :fingers-crossed::fingers-crossed:
Hopefully it will get fixed asap
Also you can leave comment in this Mi forum thread for the same --> http://en.miui.com/thread-202290-1-1.html
Click to expand...
Click to collapse
Mate just apply for a new unlock with a different email ID. and unlock using that. it will work.
all the best.
Having similar issue ...nothing works...
How To Install OREO Update Before It Is Released
Discaimer: I am not responsible for any mistakes, mishaps or BRICKED devices.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Prerequisites:
Updated to Nougat
Unlocked bootloader
TWRP installed
Basic understanding on how to use TWRP
If you don't know how to unlock your bootloader and install TWRP see post #2
I am using my device the [FRD-L04] as an example in this guide.
Step 1 Get Firmware
Create a folder on you computer and name it "oreo-update".
Go to the Firmware Finder website and find the Oreo update for your device.
Left click on the "filelist" and it will display three download links. One for "update.zip", One for "update_data_full_public.zip" and One for update_full_FRD-L04_hw_usa.zip.
Copy and paste each download link for your device into your browser's address bar and download them to your "oreo-update" folder.
You may see more than three files. The last one will have your model number in it.
Now go to your "oreo-update" folder.
Rename "update_data_full_public.zip" to "update_data_public.zip"
Rename "update_full_FRD-L04_hw_usa.zip" to "update_all_hw.zip"
Step 2 Get HuRUpdater
HuRUpdater is a great program that flashes unapproved and approved updates in TWRP.
Go to the HuRUpdater post and download the latest version to your "oreo-update" folder. Be sure to hit the thanks button while your there.
Step 3 Install Oreo
Copy "oreo-update" folder to your SD Card.
Boot to TWRP
I recommend doing a full backup and a wipe before flashing.
Choose install from the TWRP menu and select your SD Card
Navigate to your "oreo-update" folder and flash "HuRUpdater" it will prompt you to hit the volume down button to start the process.
HuRUpdater will flash the update for you. I ended up with three errors which didn't seem to matter.
Reboot and enjoy
Optional Flash TWRP
It may be possible this process relocked your bootloader. So you may need to unlock your bootloader again.
Download the latest version of TWRP from this post. This TWRP wasn't designed for our device but is the closest to a fully working TWRP I could find. DO NOT post any problems or bugs in that post!
TWRP 3.2.1-0
The fastboot commands have changed. The new command is "fastboot flash recovery_ramdisk RECOVERY.img"
If you like this guide please consider hitting the thanks button.
Useful Stuff
As of July 25th 2018 the unlock code application service has ended. You now have to use DC Unlocker to get your unlock code.
How to unlock your bootloader and install TWRP
DC Unlocker download page
How to read Huawei Android phone bootloader code with DC Unlocker
Huawei bootloader unlock tutorial by DC Unlocker
Here is how you install Magsk now
Thanks for the sharing. Could you explain a little more about which parts of the twrp for oreo are not working?
freemannhp said:
Thanks for the sharing. Could you explain a little more about which parts of the twrp for oreo are not working?
Click to expand...
Click to collapse
The only things I have found is it can't decrypt the Data partition and it tries to mount a partition that isn't on the Honor 8. It will wipe the Data partition though. I'm sure it is only a matter of time until someone builds one for our device.
And how lo unlock bootloader? Webpage is unavaliable...
edomali said:
And how lo unlock bootloader? Webpage is unavaliable...
Click to expand...
Click to collapse
Here is a link with some alternative methods. Just follow the unlock bootloader section. Use the other thread for installing TWRP.
https://forum.xda-developers.com/honor-8/how-to/guide-unlock-bootloader-tested-root-t3443946
Edit: Here is a working link to Huawei unlock code request page.
https://hwid5.vmall.com/CAS/portal/userRegister/regbyemail.html
Thanks for sharing,but i think link is wrong,i dont see where can i type imei number
Wanted to wait for ota because I thought I couldn't unlock my bootloader anyway. Recently found out I still had an unlock code on my pc somewhere. If I update with this method, will I still get future OTAs?
edomali said:
Thanks for sharing,but i think link is wrong,i dont see where can i type imei number
Click to expand...
Click to collapse
I seem to be having trouble making it past the registration. I get "system is busy". If I remember correctly you have to register first. Then you can request your unlock code. You might want to try the alternative methods listed.
timwelter said:
Wanted to wait for ota because I thought I couldn't unlock my bootloader anyway. Recently found out I still had an unlock code on my pc somewhere. If I update with this method, will I still get future OTAs?
Click to expand...
Click to collapse
I can't say for sure, but I would think so as long as you have the stock recovery installed. I know that when I flashed back to Nougat this way I was able to get OTA's.
Check this out. It looks like Huawei is giving us the big middle finger.
https://www.xda-developers.com/honor-huawei-bootloader-unlock-page-disappears/
Edit: I guess this isn't anything new but I figure I would share it anyway.
srgrusso said:
I can't say for sure, but I would think so as long as you have the stock recovery installed. I know that when I flashed back to Nougat this way I was able to get OTA's.
Click to expand...
Click to collapse
So if I flash this with hurupdater it'll automatically install the stock recovery again (remove twrp)?
timwelter said:
So if I flash this with hurupdater it'll automatically install the stock recovery again (remove twrp)?
Click to expand...
Click to collapse
Yes. It will flash it back to stock. Although it didn't lock the bootloader for me.
srgrusso said:
Yes. It will flash it back to stock. Although it didn't lock the bootloader for me.
Click to expand...
Click to collapse
Thanks gonna try this tonight.
srgrusso said:
Check this out. It looks like Huawei is giving us the big middle finger.
https://www.xda-developers.com/honor-huawei-bootloader-unlock-page-disappears/
Click to expand...
Click to collapse
This article is actually quite old, isn't it ?
pix106 said:
This article is actually quite old, isn't it ?
Click to expand...
Click to collapse
It is. If you read the comments below someone posted this from Huawei.
https://twitter.com/bang_gogo_/stat...ault#version=10804c0adb9962a677c2c75e13cd1e83
srgrusso said:
It is. If you read the comments below someone posted this from Huawei.
https://twitter.com/bang_gogo_/stat...ault#version=10804c0adb9962a677c2c75e13cd1e83
Click to expand...
Click to collapse
Which seems quite old too
pix106 said:
Which seems quite old too
Click to expand...
Click to collapse
I know it is old news, but I don't think the age of the article matters as much as the fact is that Huawei will no longer be giving out unlock codes. Just about every article you read is from that time period because that is when Huawei made the announcement. I admit I might have missed the bus on this one.
srgrusso said:
I know it is old news, but I don't think the age of the article matters as much as the fact is that Huawei will no longer be giving out unlock codes. Just about every article you read is from that time period because that is when Huawei made the announcement. I admit I might have missed the bus on this one.
Click to expand...
Click to collapse
Today someone posted a new link for a new form, that's funny you post the plder news today too
I don't know if the new form is that new or if it works though
srgrusso said:
I seem to be having trouble making it past the registration. I get "system is busy". If I remember correctly you have to register first. Then you can request your unlock code. You might want to try the alternative methods listed.
Click to expand...
Click to collapse
I don't know either where I should look for the unlock code. I get to this page after I log into my Huawei ID.
This is the Xiaomi Redmi Note 4's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread
TOOL ALL IN ONE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Install Drivers
Unlock Bootloader
Lock Bootloader (use carefully)
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Automatic ROOT
Install APKs
Uninstall APKs
Take a Screenshot
Take a Screen Reocrd
Flash Partitions
Erase All Data (This function can decrypt the phone)
Reboot Phone
Update the Tool to latest version
Update Adb and Fastboot to latest version
Set Adb and Fastboot priviliges in system wide
Install Zip directly from PC (Required TWRP on phone)(These functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect TWRP on my phone)
Flash Fastboot ROM
Delete downloaded files
ADB File Manager
DEVICE LIST
If you want you can send a request to add a new device here:
New Device Request Form
Device List
DOWNLOAD
Original Thread
DONATE LINK
If you want to support the project please consider making a donation, thanks.
Is there any source code available? I don't see many people using something like this when there are device-specific alternatives that are open source as well.
JosVermeulen said:
Is there any source code available? I don't see many people using something like this when there are device-specific alternatives that are open source as well.
Click to expand...
Click to collapse
This tool is not open source and it is device-specific for all Official supported devices.
I don't know others alternatives and I'm not interested in knowing them.
If you want to use it, ok, if you don't want to use it, it's always ok just don't bother others users
Good Job
It will make things easier for our device
v1da said:
Good Job
It will make things easier for our device
Click to expand...
Click to collapse
I want to specify that this tool can't bypass Xiaomi Bootloader Unlock procedure but all others function are working
mauronofrio said:
I want to specify that this tool can't bypass Xiaomi Bootloader Unlock procedure but all others function are working
Click to expand...
Click to collapse
Then this app is mostly useless...
Don't write all in one, including boooader unlock if it does not unlock bootloader. The only way to unlock a Xiaomi Bootloader is via the official app. So either remove bootloader unlock or all in one from the title because it is misleading.
greenys' said:
Then this app is mostly useless...
Don't write all in one, including boooader unlock if it does not unlock bootloader. The only way to unlock a Xiaomi Bootloader is via the official app. So either remove bootloader unlock or all in one from the title because it is misleading.
Click to expand...
Click to collapse
The name is that and will not be changed, this tool is not written only for xiaomi devices but also for others devices. Unfortunately Xiaomi devices needs to be unlocked through official method and this is why they have not been added until now. In all cases clicking on unlock you will be redirected to a good guide to unlock xiaomi devices.
mauronofrio said:
The name is that and will not be changed, this tool is not written only for xiaomi devices but also for others devices. Unfortunately Xiaomi devices needs to be unlocked through official method and this is why they have not been added until now. In all cases clicking on unlock you will be redirected to a good guide to unlock xiaomi devices.
Click to expand...
Click to collapse
Whatever it was designed for it does not work as intended with Xiaomi devices. So you should not have shared it with that title because it is not true. Without bootloader unlock you cannot do mainly anything and this app is not designed to unlock MI devices. It is my opinion that you shouldn't have shared it here under that name because it's very misleading. I've told you what you should do to make it not misunderstandable but you refuse to take my advice. See, whatever. You told your own opinion and I've told mine. Topic closed.
greenys' said:
Whatever it was designed for it does not work as intended with Xiaomi devices. So you should not have shared it with that title because it is not true. Without bootloader unlock you cannot do mainly anything and this app is not designed to unlock MI devices. It is my opinion that you shouldn't have shared it here under that name because it's very misleading. I've told you what you should do to make it not misunderstandable but you refuse to take my advice. See, whatever. You told your own opinion and I've told mine. Topic closed.
Click to expand...
Click to collapse
He'll just say "If you want to use it, ok, if you don't want to use it, it's always ok just don't bother others users." and ignore any valid remarks.
JosVermeulen said:
He'll just say "If you want to use it, ok, if you don't want to use it, it's always ok just don't bother others users." and ignore any valid remarks.
Click to expand...
Click to collapse
Again, i don't say what he said it's not true, i said that this is the name of the tool and that is the name of dedicated support threads. Unlock option is not available for xiaomi devices (except for Xiaomi Mi A1), in its place you will find the link to a guide to unlock the bootloader. Now if you want to tell me that a recovery on the tool is not working, or you want i add a new recovery to the list or you have problem with the tool, comment and i will try to help you, but do not keep saying unnecessary things.
Thanks and have a good day
mauronofrio said:
Again, i don't say what he said it's not true, i said that this is the name of the tool and that is the name of dedicated support threads. Unlock option is not available for xiaomi devices (except for Xiaomi Mi A1), in its place you will find the link to a guide to unlock the bootloader. Now if you want to tell me that a recovery on the tool is not working, or you want i add a new recovery to the list or you have problem with the tool, comment and i will try to help you, but do not keep saying unnecessary things.
Thanks and have a good day
Click to expand...
Click to collapse
Whatever floats your boat. You too have a good day.
ouch, i was here to unlock my 2nd mido in the fast way, well the app cant unlock bl
Very promising tool! Many thanks for your work Dev.
Can this tool flash stock images on the device with locked bootloader, or do I have to use edl?
mauronofrio said:
This is the Xiaomi Redmi Note 4's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread
TOOL ALL IN ONE
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Install Drivers
Unlock Bootloader
Lock Bootloader (use carefully)
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Automatic ROOT
Install APKs
Uninstall APKs
Take a Screenshot
Take a Screen Reocrd
Flash Partitions
Erase All Data (This function can decrypt the phone)
Reboot Phone
Update the Tool to latest version
Update Adb and Fastboot to latest version
Set Adb and Fastboot priviliges in system wide
Install Zip directly from PC (Required TWRP on phone)(These functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect TWRP on my phone)
Flash Fastboot ROM
Delete downloaded files
ADB File Manager
DEVICE LIST
If you want you can send a request to add a new device here:
New Device Request Form
Device List
DOWNLOAD
Original Thread
DONATE LINK
If you want to support the project please consider making a donation, thanks.
Click to expand...
Click to collapse
where is the download ?
miaoudak said:
where is the download ?
Click to expand...
Click to collapse
Are you kidding, right? Don't be a write-only user.. Read the post you've replied to and follow the links.. literally the first line of the quoted #1 post points to the original thread where the download links are available (one main and 3 alternatives)..
its execute from fastboot mode or edl sir...
has someone tried it and is it still working today?
Just DL this morning to test
I followed https://forum.xda-developers.com/oneplus-6t/how-to/t-mobile-6t-to-international-t3888307 to get the non-Tmobile version of the OS running, This worked, but the "oem unlock" option is still greyed out for me. The first reply to the thread says that "If you want to unlock bootloader after it's converted, then it's just a simple fastboot oem unlock", which returns the FAILED (remote: 'Flashing Unlock is not allowed') message for me, as it did before.
00gogo00 said:
I followed https://forum.xda-developers.com/oneplus-6t/how-to/t-mobile-6t-to-international-t3888307 to get the non-Tmobile version of the OS running, This worked, but the "oem unlock" option is still greyed out for me. The first reply to the thread says that "If you want to unlock bootloader after it's converted, then it's just a simple fastboot oem unlock", which returns the FAILED (remote: 'Flashing Unlock is not allowed') message for me, as it did before.
Click to expand...
Click to collapse
Hi there!
I caught your post and am here to try and assist you. Can you provide a screen shot with your system info and developer options? I had zero issues rooting my phone.
Thanks.
sameog said:
Hi there!
I caught your post and am here to try and assist you. Can you provide a screen shot with your system info and developer options? I had zero issues rooting my phone.
Thanks.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I think these are all the relevant bits, tell me if there's anything else I should upload.
Sorry for the images being so large, don't know how to control size.
00gogo00 said:
I think these are all the relevant bits, tell me if there's anything else I should upload.
Sorry for the images being so large, don't know how to control size.
Click to expand...
Click to collapse
After going through all the images, I saw that you are on 9.0.17. In your initial post, you *did* download the version for 9.0.11, right? After your phone got setup, you went through developer options first and enabled oem unlocked, correct?
Thoughts?
---------- Post added at 02:42 PM ---------- Previous post was at 02:39 PM ----------
sameog said:
After going through all the images, I saw that you are on 9.0.17. In your initial post, you *did* download the version for 9.0.11, right? After your phone got setup, you went through developer options first and enabled oem unlocked, correct?
Thoughts?
Click to expand...
Click to collapse
https://drive.google.com/open?id=1dY...EBOjau1BRvtnJQ
You also downloaded the files from the above link, correct? If not, they're part of the process. Unzip the folder and copy and paste the two files into the msm download tool 9.0.11 and use this file: MsmDownloadTool V4.0_factory_patched -- it's an EXE file -- double click it to launch the application.
sameog said:
After going through all the images, I saw that you are on 9.0.17. In your initial post, you *did* download the version for 9.0.11, right? After your phone got setup, you went through developer options first and enabled oem unlocked, correct?
Thoughts?
Click to expand...
Click to collapse
After it got setup, I went through developer options, but OEM unlock was still greyed out. After that, I did the update to 9.0.17.
sameog said:
- the link was here but I can't quote it because I'm new -
You also downloaded the files from the above link, correct? If not, they're part of the process. Unzip the folder and copy and paste the two files into the msm download tool 9.0.11 and use this file: MsmDownloadTool V4.0_factory_patched -- it's an EXE file -- double click it to launch the application.
Click to expand...
Click to collapse
That might be where I went wrong - I only copied MsmDownloadTool V4.0_factory_patched, not MsmDownloadTool V4.0_factory_mcl_op1_patched.exe. Would repeating the same steps with both files copied potentially help, or now that I have changed to the generic OxygenOS would I need to do something else?
00gogo00 said:
After it got setup, I went through developer options, but OEM unlock was still greyed out. After that, I did the update to 9.0.17.
That might be where I went wrong - I only copied MsmDownloadTool V4.0_factory_patched, not MsmDownloadTool V4.0_factory_mcl_op1_patched.exe. Would repeating the same steps with both files copied potentially help, or now that I have changed to the generic OxygenOS would I need to do something else?
Click to expand...
Click to collapse
I would copy BOTH (caps for emphasis) files and copy them into the MSM directory. Yes, repeat the process you initially went through.
It hope this helps.
sameog said:
I would copy BOTH (caps for emphasis) files and copy them into the MSM directory. Yes, repeat the process you initially went through.
It hope this helps.
Click to expand...
Click to collapse
Just did that, OEM unlocking still greyed out.
Also tried the MsmDownloadTool V4.0_factory_patched.exe, same result.
00gogo00 said:
Just did that, OEM unlocking still greyed out.
Also tried the MsmDownloadTool V4.0_factory_patched.exe, same result.
Click to expand...
Click to collapse
UPDATE: This will get involved but it should get your phone back to where you want it to be.
1. msm 9.0.11: push and hold down both volume buttons while connecting your phone. NOTE: I plug the USB C end of the cord into the phone first and plug the fat end into an open USB port. The reason is my case has a lip that covers the usb C. Provided that your oneplus drivers have been installed previously, MSM should "see" your phone and it will be connected -- look at the top of the screen. When you see it, click start and the process will finish itself. Exit MSM when your phone reboots itself.
2. when your phone reboots itself to the "welcome screen zip through setup. Enable developer options and enable oem unlocking.
3. download this tool: https://androidfilehost.com/?fid=11410963190603873631 The dev who created this tool is a beast. Follow me closely.
4. Reboot into fastboot.
5. see screen shot here
View attachment 4873751
6. Click unlock bootloader.
7. click I have a normal device.
8. Screen will flash momentarily and use your down volume key to highlight unlock bootloader (this will wipe your phone). Phone will reboot itself after the wipe.
9. After the phone reboots itself, go back into fastboot. Click on recovery flasher and rooter.
10.. select the latest twrp build for oneplus 6t fro the drop-down list.
11. uncheck delete zip from phone after flash. NOTE: I do this in case something goes wrong -- I've been lucky.
I
12. check root after boot. Select magisk v20. I personally transfered a copy to my phone to save time in stead of downloading it.
13. click flash and root.
14. copy these 2 files to your phone:
twrp-3.3.1-20-fajita-Pie-mauronofrio
magisk v20
15. Run twrp-3.3.1-20-fajita-Pie-mauronofrio like this:
advanced ----> install recovery ramdisk ------> twrp-3.3.1-20-fajita-Pie-mauronofrio --------> swipe to install
16. When that's done, reboot back into twrp and install magisk v20. press reboot system.
17. if you want 9.0.17 back, copy it into your phone and install via twrp. HUGE NOTE: 9.0.17 made me lose twrp. Go back into tool all in one (see line 3 for reference) -- that tool will re-instate root for you -- simply follow the steps above starting with line 9.
Whew! Lots of steps yes and incredibly verbose but necessary to assist you. Please keep these instructions close to you to reclaims your sanity and time. Cheers and enjoy!
sameog said:
UPDATE: This will get involved but it should get your phone back to where you want it to be.
1. msm 9.0.11: push and hold down both volume buttons while connecting your phone. NOTE: I plug the USB C end of the cord into the phone first and plug the fat end into an open USB port. The reason is my case has a lip that covers the usb C. Provided that your oneplus drivers have been installed previously, MSM should "see" your phone and it will be connected -- look at the top of the screen. When you see it, click start and the process will finish itself. Exit MSM when your phone reboots itself.
2. when your phone reboots itself to the "welcome screen zip through setup. Enable developer options and enable oem unlocking.
3. download this tool: https://androidfilehost.com/?fid=11410963190603873631 The dev who created this tool is a beast. Follow me closely.
4. Reboot into fastboot.
5. see screen shot here
View attachment 4873751
6. Click unlock bootloader.
7. click I have a normal device.
8. Screen will flash momentarily and use your down volume key to highlight unlock bootloader (this will wipe your phone). Phone will reboot itself after the wipe.
9. After the phone reboots itself, go back into fastboot. Click on recovery flasher and rooter.
10.. select the latest twrp build for oneplus 6t fro the drop-down list.
11. uncheck delete zip from phone after flash. NOTE: I do this in case something goes wrong -- I've been lucky.
I
12. check root after boot. Select magisk v20. I personally transfered a copy to my phone to save time in stead of downloading it.
13. click flash and root.
14. copy these 2 files to your phone:
twrp-3.3.1-20-fajita-Pie-mauronofrio
magisk v20
15. Run twrp-3.3.1-20-fajita-Pie-mauronofrio like this:
advanced ----> install recovery ramdisk ------> twrp-3.3.1-20-fajita-Pie-mauronofrio --------> swipe to install
16. When that's done, reboot back into twrp and install magisk v20. press reboot system.
17. if you want 9.0.17 back, copy it into your phone and install via twrp. HUGE NOTE: 9.0.17 made me lose twrp. Go back into tool all in one (see line 3 for reference) -- that tool will re-instate root for you -- simply follow the steps above starting with line 9.
Whew! Lots of steps yes and incredibly verbose but necessary to assist you. Please keep these instructions close to you to reclaims your sanity and time. Cheers and enjoy!
Click to expand...
Click to collapse
Thank you for the in depth insructions, but I still can't get past the second step - OEM unlocking remains greyed out.
dang.....
The above is what I used. There's gotta be a thread out there for your oem unlocking issue.
sameog said:
dang.....
The above is what I used. There's gotta be a thread out there for your oem unlocking issue.
Click to expand...
Click to collapse
Have you unlocked your sim?
sameog said:
dang.....
The above is what I used. There's gotta be a thread out there for your oem unlocking issue.
Click to expand...
Click to collapse
I think I might have figured out the problem... after the first step, should it show up as being version 9.0.11 or 9.0.13?
00gogo00 said:
Just did that, OEM unlocking still greyed out.
Also tried the MsmDownloadTool V4.0_factory_patched.exe, same result.
Click to expand...
Click to collapse
00gogo00 said:
I think I might have figured out the problem... after the first step, should it show up as being version 9.0.11 or 9.0.13?
Click to expand...
Click to collapse
Hey there,
You just made my memory click. Yes, make good and sure you're on 9.0.11. Reason being is that the dev who created this tool stated that T-Mobile closed the loophole in later builds, starting with 9.0.13, I think.
Now, back to 9.0.11: go into developer options and hit that oem unlock slider and then launch that tool all in one in my previous post to you.
sameog said:
Hey there,
You just made my memory click. Yes, make good and sure you're on 9.0.11. Reason being is that the dev who created this tool stated that T-Mobile closed the loophole in later builds, starting with 9.0.13, I think.
Now, back to 9.0.11: go into developer options and hit that oem unlock slider and then launch that tool all in one in my previous post to you.
Click to expand...
Click to collapse
Your instructions worked perfectly for my T-Mo 6T! Hopefully it will work for the OP.
fiffan86 said:
Your instructions worked perfectly for my T-Mo 6T! Hopefully it will work for the OP.
Click to expand...
Click to collapse
Excellent! I'm glad that my instructions were easy to follow. I honestly tried not to be verbose or even wordy but I felt that it would be detrimental to and for the process.
By the way, reach out to me if you have any other questions. I will try to have the best solution considering all the threads out there, can be overwhelming to say the least.
:good:
sameog said:
Hey there,
You just made my memory click. Yes, make good and sure you're on 9.0.11. Reason being is that the dev who created this tool stated that T-Mobile closed the loophole in later builds, starting with 9.0.13, I think.
Now, back to 9.0.11: go into developer options and hit that oem unlock slider and then launch that tool all in one in my previous post to you.
Click to expand...
Click to collapse
Yeah, I went back and checked, and I had downloaded the 9.0.13 version instead of the 9.0.11 one.
Now to just wait 2 hours to download a couple gigs from androidfilehost...
EDIT: this worked thanks
sameog said:
Excellent! I'm glad that my instructions were easy to follow. I honestly tried not to be verbose or even wordy but I felt that it would be detrimental to and for the process.
By the way, reach out to me if you have any other questions. I will try to have the best solution considering all the threads out there, can be overwhelming to say the least.
:good:
Click to expand...
Click to collapse
I haven't rooted a phone since Chainfire's SuperSU ? it feels great to flash again, it's been a few years.
same problem
hey bro I did the same thing you did but still I have the same problem
i almost broke the screen today getting mad
---------- Post added at 04:29 AM ---------- Previous post was at 04:25 AM ----------
sameog said:
Excellent! I'm glad that my instructions were easy to follow. I honestly tried not to be verbose or even wordy but I felt that it would be detrimental to and for the process.
By the way, reach out to me if you have any other questions. I will try to have the best solution considering all the threads out there, can be overwhelming to say the least.
:good:
Click to expand...
Click to collapse
please help me bro
Did you use the msm tool to install 9.11? not .13, has to be .11
NaShMiJo said:
hey bro I did the same thing you did but still I have the same problem
i almost broke the screen today getting mad
---------- Post added at 04:29 AM ---------- Previous post was at 04:25 AM ----------
please help me bro
Click to expand...
Click to collapse
1. Don't break your phone's screen. Take a step back and think about how much your phone costed to buy.
2. In my previous post, use msm tool 9.0.11. Why? T-Mobile closed the damn loophole with msm 9.0.13 (I think it was that build)
3. Go my previous post and take it a step a time. I do understand the urgency but don't rush it and trust the process.
4. Go for it.
Hello,
I have recently acquired an Xiaomi Mi A1 device to try LineageOS.
I follow the steps of the official installation guide here: https://wiki.lineageos.org/devices/tissot/install
I'm facing problems to unlock the bootloader. Despite many tries, the command "fastboot oem unlock" return the following error code "0x1002"
ADB version: 1.0.41
fastboot version: 33.0.3-8952118
USB debugging: ON
OEM unlock: ON
I have access to the fastboot mode, the device is listed with adb command "fastboot devices" and an entry appears on Windows Device Manager.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here is the command result:
I have tried to factory reset the phone but the problem still occurs.
Also Mi Unlock tool seems not be usable because Mi Account APK (com.xiaomi.account) is not installed on the phone.
Yoru2647 seems facing the same issue: https://forum.xda-developers.com/t/urgent-help-xiaomi-mi-a1-unlock-bootloader.4295115/post-87995167
Did i miss something? Any ideas about this 0x1002 error code?
Thanks for your advices.
Eren'X said:
Hello,
I have recently acquired an Xiaomi Mi A1 device to try LineageOS.
I follow the steps of the official installation guide here: https://wiki.lineageos.org/devices/tissot/install
Thanks for your advices.
Click to expand...
Click to collapse
You must have a Xiaomi account with the associated phone,
If you don't have an account, create one and use the official Xiaomi tool to unlock the bootloader.
Unlocking bootloader:
https://new.c.mi.com/global/post/101245
https://en.miui.com/unlock/index.html
Thank you for the answer.
I tried that but I'm unable to finish it, the problem is that I cannot bind the Xiaomi account on the phone.
I'm stuck in this step:
The phone was delivered with Android 12 (Go edition) without MIUI's layer. The build number indicate: 12 V13.0.8.0SGMEUXM
That means i have not "Mi Unlock status" on developer options or "Mi Account" on phone settings.
Is it possible to install additional components for bind Mi account on the phone? or any workaround to bypass it?
I desperately tried to install Xiaomi Account APK manually with adb: https://www.apkmirror.com/apk/xiaomi-inc/mi-account/mi-account-r-22-12-26-01-release/
But it failed with the error : "Reconcile failed: Package com.xiaomi.account requires unavailable shared library security-device-credential-sdk.jar; failing!]"
Is it possible to put one of the official MIUI ROM on phone even with a locked bootloader? (like these ones: https://xiaomifirmwareupdater.com/miui/tissot/)
Eren'X said:
Thank you for the answer.
I tried that but I'm unable to finish it, the problem is that I cannot bind the Xiaomi account on the phone.
I'm stuck in this step:
The phone was delivered with Android 12 (Go edition) without MIUI's layer. The build number indicate: 12 V13.0.8.0SGMEUXM
That means i have not "Mi Unlock status" on developer options or "Mi Account" on phone settings.
Is it possible to install additional components for bind Mi account on the phone? or any workaround to bypass it?
I desperately tried to install Xiaomi Account APK manually with adb: https://www.apkmirror.com/apk/xiaomi-inc/mi-account/mi-account-r-22-12-26-01-release/
But it failed with the error : "Reconcile failed: Package com.xiaomi.account requires unavailable shared library security-device-credential-sdk.jar; failing!]"
Is it possible to put one of the official MIUI ROM on phone even with a locked bootloader? (like these ones: https://xiaomifirmwareupdater.com/miui/tissot/)
Click to expand...
Click to collapse
check your model version: My phone/features/version
Example:
220733SG, 220733SH, 220733SI, 220733SL,MDG2, MDI2
Hi,
My model version is: 220733SG
Eren'X said:
Hi,
My model version is: 220733SG
Click to expand...
Click to collapse
Code name ACE not TISSOT.
And the phone is up to date
https://xiaomifirmwareupdater.com/archive/miui/ice/.
If you really want to unlock the bootloader.
Try: download Platform tools and run CMD/Power shell from platform tools folder.
CMD fastboot oem unlock
Power shell ./fastboot oem unlock
NOSS8 said:
Code name ACE not TISSOT.
Click to expand...
Click to collapse
Good catch, I should have paid more attention to this point.
I did not find any LineageOS ROM for it. I assume it is not supported on my phone for now.
However, i tried "fastboot oem unlock" command on both command promp and powershell with and without admin rights.
The result is the same: FAILED (remote: 'Unlock failed - Err:0x1002)
In the next days, i will continue to try few others things like changing USB cable, USB port, computer, ...
The problem also may be linked to FRP mode? i will check that too.
I will share the solution if i success.
Thanks
Eren'X said:
Good catch, I should have paid more attention to this point.
I did not find any LineageOS ROM for it. I assume it is not supported on my phone for now.
However, i tried "fastboot oem unlock" command on both command promp and powershell with and without admin rights.
The result is the same: FAILED (remote: 'Unlock failed - Err:0x1002)
In the next days, i will continue to try few others things like changing USB cable, USB port, computer, ...
The problem also may be linked to FRP mode? i will check that too.
I will share the solution if i success.
Thanks
Click to expand...
Click to collapse
Have you enabled usb debugging?
And why would you want to unlock the bootloader?
may be try https://forum.xda-developers.com/t/...ck-twrp-factory-image-stock-recovery.3695256/
Eren'X said:
Hello,
I have recently acquired an Xiaomi Mi A1 device to try LineageOS.
I follow the steps of the official installation guide here: https://wiki.lineageos.org/devices/tissot/install
I'm facing problems to unlock the bootloader. Despite many tries, the command "fastboot oem unlock" return the following error code "0x1002"
ADB version: 1.0.41
fastboot version: 33.0.3-8952118
USB debugging: ON
OEM unlock: ON
I have access to the fastboot mode, the device is listed with adb command "fastboot devices" and an entry appears on Windows Device Manager.
View attachment 5821853
Click to expand...
Click to collapse
Your device has to be listed like Android Bootloader Interface, this image is referential, taken from the net.
Eren'X said:
Thank you for the answer.
I tried that but I'm unable to finish it, the problem is that I cannot bind the Xiaomi account on the phone.
I'm stuck in this step:
View attachment 5822313
The phone was delivered with Android 12 (Go edition) without MIUI's layer. The build number indicate: 12 V13.0.8.0SGMEUXM
That means i have not "Mi Unlock status" on developer options or "Mi Account" on phone settings.
Click to expand...
Click to collapse
Your device is not Xiaomi Mi A1 (Tissot) but Redmi A1 (Ice), they're very different devices, even one came with Snapdragon when yours come with MediaTek.
Pay attention specially if you think to root it or install some custom ROM on it.
It runs Android One, not Android Go (Edition).
Eren'X said:
Is it possible to install additional components for bind Mi account on the phone? or any workaround to bypass it?
I desperately tried to install Xiaomi Account APK manually with adb: https://www.apkmirror.com/apk/xiaomi-inc/mi-account/mi-account-r-22-12-26-01-release/
But it failed with the error : "Reconcile failed: Package com.xiaomi.account requires unavailable shared library security-device-credential-sdk.jar; failing!]"
Click to expand...
Click to collapse
In Xiaomi devices running Android One, you don't need (nor can't) to bind an account, and the Xiaomi Unlock tool is useless for.
Unlocking bootloader is done through command fastboot oem unlock
Eren'X said:
The problem also may be linked to FRP mode? i will check that too.
Click to expand...
Click to collapse
FRP has nothing to do with.
Eren'X said:
Good catch, I should have paid more attention to this point.
I did not find any LineageOS ROM for it. I assume it is not supported on my phone for now.
However, i tried "fastboot oem unlock" command on both command promp and powershell with and without admin rights.
The result is the same: FAILED (remote: 'Unlock failed - Err:0x1002)
In the next days, i will continue to try few others things like changing USB cable, USB port, computer, ...
The problem also may be linked to FRP mode? i will check that too.
I will share the solution if i success.
Thanks
Click to expand...
Click to collapse
Facing the same issue, FAILED (remote: 'Unlock failed - Err:0x1002) when trying "fastboot oem unlock". I have tried Please share if you find solution thanks
If all the mentioned were met, and the error persists, then try opening the CMD as admin.
NOSS8 said:
Code name ACE not TISSOT.
Click to expand...
Click to collapse
SubwayChamp said:
Your device is not Xiaomi Mi A1 (Tissot) but Redmi A1 (Ice), they're very different devices, even one came with Snapdragon when yours come with MediaTek.
Click to expand...
Click to collapse
Helpful answers.
Finally, i did it.
This article give the soluce: https://www.droidwin.com/unlock-bootloader-on-mediatek-devices-using-mtkclient
"However, there are a few MediaTek devices that don’t accept any of these Fastboot Commands. if your device also falls in this domain, then this guide shall help you out. In this tutorial, we will show you the detailed steps to unlock the bootloader on your MediaTek device using MTKClient."
I followed it step by step and it works!
SubwayChamp said:
Pay attention specially if you think to root it or install some custom ROM on it.
Click to expand...
Click to collapse
Yep, I haven't found a lot of custom ROM who support (ice) codename.
Any better place here to post about "Redmi A1/POCO C50/A1+ (ice)"?
I don't seem to be the only one to make this confusion.
Eren'X said:
Helpful answers.
Finally, i did it.
View attachment 5828629
This article give the soluce: https://www.droidwin.com/unlock-bootloader-on-mediatek-devices-using-mtkclient
"However, there are a few MediaTek devices that don’t accept any of these Fastboot Commands. if your device also falls in this domain, then this guide shall help you out. In this tutorial, we will show you the detailed steps to unlock the bootloader on your MediaTek device using MTKClient."
I followed it step by step and it works!
Yep, I haven't found a lot of custom ROM who support (ice) codename.
Any better place here to post about "Redmi A1/POCO C50/A1+ (ice)"?
I don't seem to be the only one to make this confusion.
Click to expand...
Click to collapse
Well, not, unfortunately, it seems that your device is not popular at all among developers. As a "deposit" of custom ROMs, you should try AFH, SourceForge, PlingOS, apart than from Twitter.
Depending on how many similar are the two linked devices, then you should search for something for them.
The device is young, it's been released in September 2022. I don't expect to find a custom ROM before long time.
The generic system images may be a good alternative in this case, like this one: https://forum.xda-developers.com/t/gsi-13-lineageos-20-light.4509315/
It's not my daily phone, i get it specifically to experiment. I would be careful, but for 80$ it's not a big loss if i brick it.
I will try it when i have more free time.
Thanks for helping
Eren'X said:
The device is young, it's been released in September 2022. I don't expect to find a custom ROM before long time.
The generic system images may be a good alternative in this case, like this one: https://forum.xda-developers.com/t/gsi-13-lineageos-20-light.4509315/
It's not my daily phone, i get it specifically to experiment. I would be careful, but for 80$ it's not a big loss if i brick it.
I will try it when i have more free time.
Thanks for helping
Click to expand...
Click to collapse
Yes, it's not much time since was released, the normal waiting time could be at least 6 months.
Yes, GSIs, are a good alternative.
Don't forget to back up all the partitions available, less userdata, that occupy a really huge size (about 100 GB of storage), and super partition (don't care about). And a last advice, never user format all feature through SPFT, otherwise you'll erase NVRAM partition, fingerprint, LTE signal, IMEI and more.