Hey,so I have the Note 3 HLTE and I need NEE since I live in scandinavia and I need the baseband and BootLoader and there is alot of new things since back in 2013 or so I flashed and tested out several AOSP ROMS including PacMan,RR,Carbon and others. So I have gone stock android 5.0 for close to 3-4years now and I watched a newly updated URL on the net about the best and newest ROMs that are based on android 9.0 and 10.0 and I found the Havoc Rom pretty interesting.
But there are so much to delve into, and I kinda forgot the process in order to Root from installing Odin,picking the CSC,BL,AP to installing TWRP to installing Custom ROMs. So I need a step by step guide on how to do this. I used to use the SuperSU app,but found out Magiska stops even more. I have also downloaded the GAPP pico and nano.
I have installed Odin 3.13.1, had to get a stock SAM 5.0 android FW image, managed to find the PIT file in case, and I'm using this and I'm thinking this is the correct to use; N9005XXUGBNL8_CL3643614_QB3415922. If not please redirect me to the correct one. So I think I have all that I need,but I'm not sure.
I have found several guides here on XDA and read them when it comes to the ROM installation,outside of XDA and a updated YT video that has been updated in 2020,but they are different in the step-by-step and so I dont know which to follow.
So I need somone who is kind enough to guide and write down step by step on how to flash with Odin, TWRP via Odin and the Custom ROMs. THe installing of Custom ROMs I have no problems to do. But I need the correct order so I dont brick my phone or bootloop it.
Kind regards
Anders
Odin and flash
TWRP Recovery as per version required by each rom .
Flash Custom rom as per that roms instructions .
CSC NA
BL NA unless instructed to update .Likewise baseband/ modem
CSC BL AP are for stock rom Odin flashing not custom .
JJEgan said:
Odin and flash
TWRP Recovery as per version required by each rom .
Flash Custom rom as per that roms instructions .
CSC NA
BL NA unless instructed to update .Likewise baseband/ modem
CSC BL AP are for stock rom Odin flashing not custom .
Click to expand...
Click to collapse
Thanks for replying.
can you do a little more detailed explaination of of each steps please, It would highyl appreciated and help me calm down and worry a lot less.
bump
Successfully rooted the phone,thanks for the help
Related
Hello,
I tried flashing my n910g with "Dr.Ketan ROM I N5 Port I Full Theme store support I S6 Edge features L12" ROM.
After flashing, I also flashed the bootloader and modem mentioned by Dr.Ketan. The phone is stuck at the bootscreen with an error seandroid.
RECOVERY BOOTING Recovery is NOT SEANDROID ENFORCING Set Warrenty Bit. I used cwm recovery before flashing my ROM and my phone was already rooted with cf autoroot before flashing this rom.
I wanted to try this rom in my phone and I'm a noob. Can somebody please help me with this ? It'd be a great favor.
I'm a noob, please help me with the appropriate files/instructions so that I can start using my phone. As of now, my phone is still stuck at the boot screen with that error.
Download Stock firmware from sammobile for your phone and flash it with ODIN.
dork997 said:
Download Stock firmware from sammobile for your phone and flash it with ODIN.
Click to expand...
Click to collapse
Does it mean I would not be able to use the N5 port rom?
I see many people using this rom for N910G in India. I've shared much detailed info about my issue. Somebody please help.
Funny Sykes said:
I see many people using this rom for N910G in India. I've shared much detailed info about my issue. Somebody please help.
Click to expand...
Click to collapse
i have no idea about note 5 port as i have never used it.
dork997 said:
i have no idea about note 5 port as i have never used it.
Click to expand...
Click to collapse
Alright, now that my n910g is stuck with that I tried installing some nameless rom and the screen doesn't really work. I need to use Spen always even to click on the dial button.
Can you suggest any good rom for Note 4 N910g?
I really need to give my phone a fresh start as this will be my first time to flash my phone.
Please help!!
Listen, Dr. Ketan's note 5 port L12 with S6 edge features is based on android 5.1.1 Australian "COH4" baseband version. So first download and install that stock firmware having COH4 baseband version using odin. Here's the link for that: www.sammobile.com/firmwares/download/56424/N910GDTU1COH4_N910GXSA1COH4_XSA/
And after installing this, root your phone, then install CWM recovery and install dr. Ketan's L12 version rom which you have downloaded. Your phone will work fine after that.
Baseband version of your phone plays a very important role in determining which rom you can install on your phone. For example if u liked and downloaded a samsung stock modified custom rom that has baseband version say "PQR" and suppose if your phone has baseband version "XYZ" then you cannot install that rom on your phone. To install that rom you will first need to flash the stock rom of PQR baseband version in Odin. To check which baseband version your phone is running, go to (settings >> about phone/device >> baseband version). Look at the last 3 or 4 alphabets.
Shane_Picardo said:
Listen, Dr. Ketan's note 5 port L12 with S6 edge features is based on android 5.1.1 Australian "COH4" baseband version. So first download and install that stock firmware having COH4 baseband version using odin. Here's the link for that: www.sammobile.com/firmwares/download/56424/N910GDTU1COH4_N910GXSA1COH4_XSA/
And after installing this, root your phone, then install CWM recovery and install dr. Ketan's L12 version rom which you have downloaded. Your phone will work fine after that.
Baseband version of your phone plays a very important role in determining which rom you can install on your phone. For example if u liked and downloaded a samsung stock modified custom rom that has baseband version say "PQR" and suppose if your phone has baseband version "XYZ" then you cannot install that rom on your phone. To install that rom you will first need to flash the stock rom of PQR baseband version in Odin. To check which baseband version your phone is running, go to (settings >> about phone/device >> baseband version). Look at the last 3 or 4 alphabets.
Click to expand...
Click to collapse
Alright, downloading the stock firmware and then will try flashing it with the kd.Ketan's L12 rom. I hope it works.
Funny Sykes said:
Alright, downloading the stock firmware and then will try flashing it with the kd.Ketan's L12 rom. I hope it works.
Click to expand...
Click to collapse
downloaded the mentioned stock rom and then tried flashing the dr.ketan rom.
It always kept saying android media stopped working and when i click ok, again the same pop up and nothing works.
No icons are displayed but the edge+ feature was showing.
What is the best way to have this rom ?
Funny Sykes said:
Alright, downloading the stock firmware and then will try flashing it with the kd.Ketan's L12 rom. I hope it works.
Click to expand...
Click to collapse
Did you try my method? Did it work?
Used coh4 baseband which you said. But could not find the proper root file. Please help with the root and cwm files for 910g which work. Then i will try flashing dr.ketan rom
Yes I tried, now I am using the same baseband you have mentioned which is Australian, now the touch doesn't work well but with s pen it works fine. What to do ?>
Shane_Picardo said:
Did you try my method? Did it work?
Click to expand...
Click to collapse
"Shane_Picard"
Downloaded the stock from from sammobile and my phone was able to boot successfully. But the problem is that ever since, I tried flashing twrp recovery to flash dr.ketan rom which did not work. My phone's touch is really not working well. I have enabled touches in developer options and confirm that my s-pen works fine but when I touch the phone, it gets detected 1 cm below where I actually touch. This problem might have been created when I flashed twrp recovery because that was the first time I saw this issue.
Please help how to fix this ?
found my country is familiar with this modem:
i9500xxuhoc5
Israel (Cellcom) 5.0.1 I9500XXUHOC5
or
I9500XXUHOI1
I want to download the full rom and then extract only the modem and flash it
is it possible? how to do it?
found the download link but when I extract all I have is 1 file:
tar.md5
thanks so much!!
Hey are you referring to the official full rom/firmware downloaded from sammobile.com?
I know this sounds ridiculous, but I got around my modem issues by installing the official rom/firmware from the above website (thus installing the proper modem), then flashing everything I wanted from there (TWRP, custom rom, xposed, etc.)
(I couldn't find a mirror for my exact modem...... :s)
Hope this helps
LogicalJunkie549 said:
Hey are you referring to the official full rom/firmware downloaded from sammobile.com?
I know this sounds ridiculous, but I got around my modem issues by installing the official rom/firmware from the above website (thus installing the proper modem), then flashing everything I wanted from there (TWRP, custom rom, xposed, etc.)
(I couldn't find a mirror for my exact modem...... :s)
Hope this helps
Click to expand...
Click to collapse
thanks for answering
I have custom rom infules v4
and have serious signal issues
what do you recommend to flash?
darixtorento1 said:
I have custom rom infules v4
and have serious signal issues
what do you recommend to flash?
Click to expand...
Click to collapse
Hi sorry I'm unaware of a rom named "infules v4", but I'd first would go flash stock OFW just to ascertain that its a software/modem fault, rather than a hardware fault.
For instance, me being in Australia and having an Optus sim card, I flashed the firmware package with the XXUHOJ3 Modem in it (http://www.sammobile.com/firmwares/download/62513/I9505XXUHOJ3_I9505OPSHOJ1_OPS/).
Assuming you downloaded: (http://www.sammobile.com/firmwares/download/57455/I9500XXUHOI1_I9500OJKHOI1_CEL/);
Open up ODIN and load the firmware to PDA/AP (depending on which version of ODIN you've got).
From there you can root, flash twrp, install "infules v4", and whatever other goodness you like
Note: Just whatever you do, make sure you do a nandroid backup prior
You can't Odin to NK3 from MM PE3, so in order to do this you've gotta Odin downgrade to LP COK2 and THEN flash recovery flash the selected KK rom of choice and then whatever KK kernel ya can find that ya like, I've found that LLFK is still active and alive. You might also wanna Odin flash the KK modem too for better GPS location.
Samsung made it or tried to make it irreversible ever since COK2, it's impossible to Odin back down to NK3 KK, so you have to flash a rom, kernel and modem for matching baseband.
1st: Odin COK2 Firmware LP 5.1.1: https://www.androidfilehost.com/?fid=24545065934258546
2nd: Odin Your Desired Custom Recovery
3rd: Flash Desired KitKat Rom of Your Choosing
4th: Flash KitKat Low Lying Fruit Kernel N915T: http://forum.xda-developers.com/note-edge/general/kernel-allows-selinuxpermissive-n915t-t3017469
5th: Odin KitKat NK3 N915T Modem: http://www.mediafire.com/download/s3l46lx7dfs26on/modem.tar.md5
Trust me I played around for a day and a half until I discovered it was possible to boot a KK rom off of COK2 and messing with Odin too, just a warning if ya don't flash a kernel you won't have working WiFi at all. Can't even Odin to LP 5.0.1.
I tried 3 times, regular flashing once, no kernel or modem, WiFi toggles would stick and just freeze as if they hadn't been touched and switched on, another time with the kitkat modem Odin flashed after installing the KK rom, again no response to the WiFi toggles no sign of WiFi connectivity, GPS location was better than no old KK modem and faster at picking up a location and then I flashed a kernel and suddenly everything was working as it should.
n1nj4Lo said:
You can't Odin to NK3 from MM PE3, so in order to do this you've gotta Odin downgrade to LP COK2 and THEN flash recovery flash the selected KK rom of choice and then whatever KK kernel ya can find that ya like, I've found that LLFK is still active and alive. You might also wanna Odin flash the KK modem too for better GPS location.
Samsung made it or tried to make it irreversible ever since COK2, it's impossible to Odin back down to NK3 KK, so you have to flash a rom, kernel and modem for matching baseband.
1st: Odin COK2 Firmware LP 5.1.1: https://www.androidfilehost.com/?fid=24545065934258546
2nd: Odin Your Desired Custom Recovery
3rd: Flash Desired KitKat Rom of Your Choosing
4th: Flash KitKat Low Lying Fruit Kernel N915T: http://forum.xda-developers.com/note-edge/general/kernel-allows-selinuxpermissive-n915t-t3017469
5th: Odin KitKat NK3 N915T Modem: http://www.mediafire.com/download/s3l46lx7dfs26on/modem.tar.md5
Trust me I played around for a day and a half until I discovered it was possible to boot a KK rom off of COK2 and messing with Odin too, just a warning if ya don't flash a kernel you won't have working WiFi at all. Can't even Odin to LP 5.0.1.
I tried 3 times, regular flashing once, no kernel or modem, WiFi toggles would stick and just freeze as they hadn't been touched and switched on, another time with the kitkat modem Odin flashed after installing the KK rom, again no response to the WiFi toggles no sign of WiFi connectivity, GPS location was better than no old KK modem and faster at picking up a location and then I flashed a kernel and suddenly everything was working as it should.
Click to expand...
Click to collapse
So does it allow you to go back to 5.1.1 from 6.0.1 by just flashing 5.1.1 In Odin with everything working?
Yes you can, no I couldn't go any further back than COK2 5.1.1 Odin firmware everything working fresh like new out the box, any earlier Odin firmware attempts ended in the fail error everyone is posting about, tried with BOD7 5.0.1 Odin firmware and got the same error as KK firmware.
TL;DR Simplicity - COK2 LP 5.1.1 is the earliest you can back to in Odin, I think COK2 locked the previous version firmwares bootloader, trying to make downgrading to Original KK firmware irreversible.
Sent from my SM-N915T using Tapatalk
n1nj4Lo said:
Yes you can, no I couldn't go any further back than COK2 5.1.1 Odin firmware everything working fresh like new out the box, any earlier Odin firmware attempts ended in the fail error everyone is posting about, tried with BOD7 5.0.1 Odin firmware and got the same error as KK firmware.
TL;DR Simplicity - COK2 LP 5.1.1 is the earliest you can back to in Odin, I think COK2 locked the previous version firmwares bootloader, trying to make downgrading to Original KK firmware irreversible.
Sent from my SM-N915T using Tapatalk
Click to expand...
Click to collapse
Cool, I just want to go to 5.1.1 maybe to check out some of those roms. I'm using tekhd 6.0.1 deodex and saw some interesting 5.1.1 roms I might want to try as I just received a note edge after trading in my note 4 for a broken camera that didn't focus so I'm ready to start roming this bad boy. But a simple Odin back to 5.1.1 and I'm good to go sounds great. I was hesitant to update to 6.0.1 as I thought I wouldnt be able to go back but did the update anyway. Thanks for the response. I'll try in a few days after playing around with 6.0 for a few days.
In theory you could probably go down to LP 5.1.1 just by flashing a LP rom and a LP kernel, I don't see why the same method wouldn't work for that. So before ya Odin get a good LP kernel and LP rom and try that out, I seen someone say to do that to LP for KK and that's what made me try and find out.
n1nj4Lo said:
In theory you could probably go down to LP 5.1.1 just by flashing a LP rom and a LP kernel, I don't see why the same method wouldn't work for that. So before ya Odin get a good LP kernel and LP rom and try that out, I seen someone say to do that to LP for KK and that's what made me try and find out.
Click to expand...
Click to collapse
True, but I'll want to have a clean install for any rom I use on 5.1.1 just in case. Thanks again, team work makes the dream work.....of being a flashaholic. Lol
Do you have to be rooted for this to work? Honestly I just want to root my phone, but it seems like you can't root MM if you're on T-mo. I figured downgrading was my only option.
This thread should be a sticky
I can't seem to find any Kitkat kernels and LLFK dropbox links won't load for me. Anyone know where to get kitkat kernels?
EDIT: Seems it was a problem with my computer. Got it to load on my phone. But the Mediafire link also seems broken with a captcha that won't load properly. I'll see how it goes without it.
@MikeChannon Should this be stickied? @Zuffle I'll see if I can find a mirror or if db works me then make one myself.
n1nj4Lo said:
@MikeChannon Should this be stickied? @Zuffle I'll see if I can find a mirror or if db works me then make one myself.
Click to expand...
Click to collapse
Well a couple of things. Tutorials normally go in the device General forum so they don't get lost in a sea of question threads, but the decision about whether it should be a sticky or not I normally leave to the Forum Moderators who are a bit more in touch with what's happening in the forum and know better what should be stickied.
So let's summon the Mods for this device: @Whiskey103 @Jonny @Razvan @Bajanman @sawdoctor @TEKHD @The Merovingian @mark manning
Mike
MikeChannon said:
Well a couple of things. Tutorials normally go in the device General forum so they don't get lost in a sea of question threads, but the decision about whether it should be a sticky or not I normally leave to the Forum Moderators who are a bit more in touch with what's happening in the forum and know better what should be stickied.
So let's summon the Mods for this device: @Whiskey103 @Jonny @Razvan @Bajanman @sawdoctor @TEKHD @The Merovingian @mark manning
Mike
Click to expand...
Click to collapse
lazy see,lazy do... .....:silly:
Theoretically this could be done for any version of the note edge, just remember to rollback and odin flash the matching version of 5.1.1 for your edge and then get the modem for it if possible and the kitkat rom of your choice, as well as root and twrp. But I believe and don't see why this side-step method wouldn't work for other versions of the edge and I imagine they (Sammy) locked the bootloader on all versions of 5.1.1, which is what people are getting hung up on in odin trying to flash 5.0.1 and 4.4.4
It's just the US models that Samsung locked the bootloader. I don't know about the Korean models but the other international models you can downgrade to any firmware of your choice.
Hey guys ..
I need a real help here.. since I'd neither rooted a phone nor installed a custom ROM before.. Its also my first thread here in xda :laugh:
and I'm now about to do so with a used "Note 3 N9005" which I've bought recently.. now I want to install the "Phronseis latest Note 5 Marshmallow ROM port"
knowing that this device condition now is "Official and not rooted" with the latest official Lollipop 5.0 from Samsung via OTA update.. and the Knox is tripped showing "0x1 (4)" in the bootloader..
My problem now is that when I've read the step by step guide of the installation process I found myself lost because of some terms that I have no idea about which made me afraid of messing the things up or bricking the phone :crying:.. for example they talked about the "kernel" and I don't know if I could just ignore this part and go through the steps resulting in installing that ROM with the stock kernel??
and all that brings other questions to my mind :
1-what exactly should I do to get this phone from this official state to the desired one?
2-what about the battery life and screen on time? will it be affected by that ROM or the kernel that going to be used with it??
3-will I be able to go back to official state anytime later by flashing the official Kitkat ROM with Odin for example?
4-will this thing change my IMEI or CSC and if it does will it be irreversible?
Any help is appreciated but please there is no room to give "opinions".. because in my condition I need "facts" :good:..
Thank you in advance
A rom has instructions start by reading them .
You can revert to stock by flashing via Odin.
Facts there are a number of faqs and stickies.
Opinion unless you understand the basics flash nothing.
http://forum.xda-developers.com/galaxy-note-3/general/samsung-galaxy-note-3-sticky-roll-t3237249
Rule 1 backup EFS
Rule 2 read the instructions .
Rule 3 Understand the instructions .
Regarding the rom you want to flash all the details re kernel etc are in the OP page 1.
Sent from my SM-N920C using XDA-Developers mobile app
Root
Install custom recovery
Use custom recovery to backup your current rom.
Install custom rom as per instructions .
Hi guys
I recently moved to the note 4 910F from another device.
As I have always favored custom roms ( regardless if I was using a samsung or LG or another brand device ).
The problem I am facing now is that the xda Note4 forum seems to be incredibly messed up. There are literally tens of threads with useless information and whole new threads just for one download link or something.
If someone new like me comes to the Note 4 forum he will not know where to start. The previoux device I used had a beautifully organized XDA section.
Anyway. What I did until now was to flash :
1. flashed cf-root over the stock firmware and verified that it worked
2. installed busybox
3. tried to install TWRP as I have always used it . But , Their page said to make sure I have the correct bootloader installed.
So, I got back to the rom page that I wanted to use and the dev had links there for the correct bootloader and modem. Downloaded and flashed them with odin. Now my device was restarting every 1 minute or so and I no longer had any IMEI and baseband version was unknown
I fixed it by flasks the stock firmware with odin
Can you guys help me out with some correct information on how to be able to flash a custom rom ? I know how to root it but what bootloader do I need in order to install the custom recovery and flash a new rom ?
Thank you in advance.