AI Upscaling model, where is it stored? - Nvidia Shield TV & Shield TV Pro (2019) Questions

I've been trying to figure out if it's possible to extract the pre-trained AI upscaling model from the Nvidia Shield ROM. Has anyone managed to find where the model is stored?

Related

Is possible Activate Flash?

I use apps as tv gratis online thar uses flash, and now with my s4 9505 it´s impossible.
Are there any way to activate it?
Thanks

Xtrons TD695AB, how to root it ?

Hello everybody,
I just bought this model and install it in my car.
I wish to root it, but haven't found any explanation to do it, and don't know exactly the model of the CPU (0:30 in the video on Xtrons website, sorry but I'm not able to put the address).
Does somebody have a idea ?
Thank's
I recently bought an XTRONS D714A, Android 4. Kingroot worked, Towelroot not.
Hope this helps.
Hello,
Thank's for your reply, but after trying Kingroot, I got a message saying that this model (AC83XX) was not supported.
what a pity. I thought they are not very different.
What do you try next? Flash a custom firmware?
Hello,
I also have try Towelroot, but without success.
I don't think I will try a custom firmware, it seems difficult to find a root for this model, then a firmware it will be worse
vingtsept said:
Hello everybody,
I just bought this model and install it in my car.
I wish to root it, but haven't found any explanation to do it, and don't know exactly the model of the CPU (0:30 in the video on Xtrons website, sorry but I'm not able to put the address).
Does somebody have a idea ?
Thank's
Click to expand...
Click to collapse
I'm thinking of buying this head unit, what's your opinion of it?
Any flaws/downsides that you have discovered yet?
Can you post some more information about it, to go with the processor that you have found out? 'About device' etc.
It is a very good car radio, chip is the RK3188. Working flawless.
MCU says LM-AND841...
If you google it, there is almost nothing to find about that.
So I do not know if I should try to flash a custom firmware.
And I can not get into recovery, only the lying Android with a red triangle and a "!" appears.
I don´t know if this has something to do with rooting.
TWRP or CWM can not be installed, device unknown.
So I even do not know how to flash a CFW.
vingtsept, can you try if you can get into recovery mode? Thanks in advance.
Did you try Kingoroot?
Do you know the "universal root for Rena3"? Maybe its worth a try? Worked with another Android-car-radio I had, but a bit older. Probably not the right thing...
http://androidstereo.mobile.eu.org/?dir=root
maybe here is something for you?
Hello,
Thank's for the link; I trued Kingoroot, but also without success.
I will stop my recherch for the moment, this model seems to be unknow by root apk.
At BlackSprint, Xtrons models are pleasant to use, very fast to start (more than the original car stereo !) and reagent.
But if you want a model who's can be rootable, it can be a better idea to choose another model than the TD695AB.
For exemple the XTRONS D714A like x_rainer_x (single DIN), or the Xtrons TD696A (double DIN) , which seems him to be rootable (thing to check).
At x_rainer_x, I have also try some key combinaison, but impossible to find how go to the recovery mode
vingtsept said:
Hello,
At BlackSprint, Xtrons models are pleasant to use, very fast to start (more than the original car stereo !) and reagent.
But if you want a model who's can be rootable, it can be a better idea to choose another model than the TD695AB.
For exemple the XTRONS D714A like x_rainer_x (single DIN), or the Xtrons TD696A (double DIN) , which seems him to be rootable (thing to check).
Click to expand...
Click to collapse
Thanks for your help with this (and x_rainer_x too)
I was looking at the TD695AB because it was Quad Core on Android 4.4 and has all the features that I want, although finding out that it's not an MTCB/D unit is a disappointment.
The TD696A looks very nice but it has no front facing USB or SD slots and no 'hard' buttons, its also 50% again more expensive.
I think my other alternative is the TD618AS, it has a slightly smaller screen but is 1024 by 600; a higher resolution but an odd 'squashed' aspect ratio which I'll have to think about.
There are plenty of reports on here of MTCD units not going so well with Android 5.1 so I have reservations about it but at least I'll be able to put other ROMs on it to resolve some of the issues.
. . . . And I thought I had come to a decision, looks like more research & thinking ahead of me
Looks like the links didn't work...I'll try again:
TD618AS: _http://xtrons.co.uk/td618as-6-2-android-5-1-lollipop-quad-core-64-bit-operating-system-double-din-car-dvd-player.html_
TD695AB: _http://xtrons.co.uk/td695ab-6-95-inch-double-din-android-4-4-4-kitkat-quad-core-car-dvd-player-with-screen-mirroring-function-obd2.html_
TD696A: _http://xtrons.co.uk/td696a-6-95-inch-android-4-4-4-kitkat-quad-core-digital-multi-touch-screen-double-din-car-dvd-player-with-obd2.html_
vingtsept said:
Hello,
Thank's for the link; I trued Kingoroot, but also without success.
I will stop my recherch for the moment, this model seems to be unknow by root apk.
At BlackSprint, Xtrons models are pleasant to use, very fast to start (more than the original car stereo !) and reagent.
But if you want a model who's can be rootable, it can be a better idea to choose another model than the TD695AB.
For exemple the XTRONS D714A like x_rainer_x (single DIN), or the Xtrons TD696A (double DIN) , which seems him to be rootable (thing to check).
At x_rainer_x, I have also try some key combinaison, but impossible to find how go to the recovery mode
Click to expand...
Click to collapse
Hello,
try this to root your device ,go to settings -> Factory Settings -> Password : *#hct#root#

backup firmware

Hi all, somebody know how do a firmware backup from a fire stick?
I have 2 fire sticks
one bought in amazon USA, and another bought in Amazon MX, so the Amazon MX has a different firmware and I can use my amazon prime account on it, while in the amazon USA I can't because the software is not the same.
I want to know if there is a way to copy the firmware from MX to USA.
Thank you for you help
Regards

Alps 825X_PRO 10.1"

I got alps 825x_PRO. 10.1" Android ver. 10, It can't remember settings, video out is not working, lights are not working. Need reload firmware. So far I got 8888, 8877, 8878, for settings. But it won't remember. If anyone can help me where to get firmware, or why it can't remember settings. Seller Ossuret Factory Store is bad. Sending videos of different models and useless solutions. Refused to give me the firmware.

(URGENCY) Firmware for TV BOX MXQ PRO 4K 5G

Firmware for TV BOX MXQ PRO 4K 5G
Processor: Allwinner H3 J5034BA 682X
Wifi chip: XR819 69076AA 69L1
Bord: MXQ-HX-V3.0 2022-09-19
All firmware I test is stuck on the home screen, And I don't have the official firmware so I'm not able to use the tv box, I want

Categories

Resources