Greetings.
I've brought my Z6 back from a brick and now need to reset my IMIE. I'm having trouble with Windows recognizing my phone. When in fastboot mode, it will show up in the device browser. However I can't get my computer to recognize it in ADB mode. Any ideas?
Thanks,
Related
Hi guys
I bricked my galaxy Spica a while a go und it was lieing around for a while no. I thought i could give it a try to unbrick it again.
The situation at the moment:
When I start it, bootloop.
Recovery isent working.
I can get it to download mode, but if i connect it to my win7 computer per usb, the pc doesent get a connection. The drivers are installed, but Odin cant connect to it.
I allso tryied AdamOutlers one click unbrick, but dident get a connection eather. http://forum.xda-developers.com/showthread.php?t=1153310
I also tried to get it connected over ADB. With the command ADB devices I ony get "list of al atached devices" followed by nothing.
Anybody here has an idea what else i could do to get the phone connected to the computer? Or do you think its a permanent brick?
Greetz Hilmy
Did you try remove battery then after some minutes put it back and try download mode?
I tried that to. Dident help.
Any other ideas?
Hilmy said:
Hi guys
I bricked my galaxy Spica a while a go und it was lieing around for a while no. I thought i could give it a try to unbrick it again.
The situation at the moment:
When I start it, bootloop.
Recovery isent working.
I can get it to download mode, but if i connect it to my win7 computer per usb, the pc doesent get a connection. The drivers are installed, but Odin cant connect to it.
I allso tryied AdamOutlers one click unbrick, but dident get a connection eather. http://forum.xda-developers.com/showthread.php?t=1153310
I also tried to get it connected over ADB. With the command ADB devices I ony get "list of al atached devices" followed by nothing.
Anybody here has an idea what else i could do to get the phone connected to the computer? Or do you think its a permanent brick?
Greetz Hilmy
Click to expand...
Click to collapse
May be you need to make youself a jig!!!!
All you should need is download mode after a full charge (!) and then either do a full reset (use the options in Odin to reset apart from EFS clear ;-) ) and then you should be able to use download mode properly.
For the drivers, how does it show up in Device Manager?? I had this myself a while back and it was simply that the drivers didn't match how it was showing up. After searching around for a while I found various packages on samdroid.net and the right ones for me then worked fine. Either the Kies ones, the google ones or the Nexus S drivers from tom3q's CM7 build...
Hi there,
I've tried root my Nexus 10 today, I've unlocked the bootloader first, then use the fastboot root the device.
However, when I reboot the device, it was stuck on the symbol "X".
I thought it might something wrong, so I try to flush the 4.2.2 ROM from Google.
When I using the fastboot flush the system.img, it got an error, so I terminate it.
After I reboot the device, my computer can't recognize the device anymore.
Currently my Nexus 10 can still get the fastboot mode, the only problem is that fastboot and adb both can't see my device on my computer.
I tried on Mac and Windows 8, same result..
Help! Any suggestions?
Thanks.
Update:
I change another cable which I use on my kindle, then every thing goes well...
Thanks
Hello,Today I stupidly tried to root with kingoroot and bricked my phone, now I downloaded a new rom to fix it but now I see that my computer (or any computer) can't recognize the phone but I can still charge it
When I connect it to my phone it says device is malfunctioning. I am out of options and very frustrated
Please someone help me
Malone555 said:
Hello,Today I stupidly tried to root with kingoroot and bricked my phone, now I downloaded a new rom to fix it but now I see that my computer (or any computer) can't recognize the phone but I can still charge it
When I connect it to my phone it says device is malfunctioning. I am out of options and very frustrated
Please someone help me
Click to expand...
Click to collapse
Plug to odin in download mode. Does odin recognise it?
The other day I was trying to flash my 6p back to stock so I can sell it, and I was flashing everything through cmd, until all of a sudden cmd stopped working towards the end for some reason. Now my phone only boots into fastboot mode and is NOT being detected by my pc. When it's plugged in, the fastboot menu says to connect the data cable. I've tried restarting my computer and reinstalling the drivers, but nothing seems to work. When I go into cmd and type adb devices, nothing shows up when it's plugged in, and device manager doesn't show any changes whether it's plugged in or not.
I've called local cellphone repair shops, but apparently if it's not Samsung or iPhone they can't help
Btw I've searched the forums and haven't found a solution to this problem.
Robertdudeman said:
The other day I was trying to flash my 6p back to stock so I can sell it, and I was flashing everything through cmd, until all of a sudden cmd stopped working towards the end for some reason. Now my phone only boots into fastboot mode and is NOT being detected by my pc. When it's plugged in, the fastboot menu says to connect the data cable. I've tried restarting my computer and reinstalling the drivers, but nothing seems to work. When I go into cmd and type adb devices, nothing shows up when it's plugged in, and device manager doesn't show any changes whether it's plugged in or not.
I've called local cellphone repair shops, but apparently if it's not Samsung or iPhone they can't help
Btw I've searched the forums and haven't found a solution to this problem.
Click to expand...
Click to collapse
Can you enter recovery?
No I can't enter recovery
Hi everybody,
ill try to make it short:
My 6p has entered into the bootlooping mode.
I have never unlocked the bootloader/changed ROM/kernal.
After I let it bootloop until the battery is dead it's changing from bootlooping into blinking red dot. Then when I charge it for a couple of minutes it comes back to life after 10~ min it's bootlooping again - so I have a window of possibilities to play with the setting. In that window I have used the "OEM unlocking" option.
In the bootlooping state when I boot into the bootloader and connect it into the PC the device doesn't recognize that it has been connected and a PC ,and the PC recognize a entry of new device but doesn't recognize it is a Nexus 6p.
this situation is the same when I connect the phone when it is alive.
I have installed adb and fastboot with this software
https://forum.xda-developers.com/showthread.php?t=2588979
with the 1.4.3 version it shows in the end of the process "0 files copied" and then I tried the 1.3 version and it showed that 4 files were copied but it also showed an error.
I have also downloaded ADB from google site but it does not work either.
When I try to open the powershell in a folder where I have downloaded an img and type in a fastboot command the computer doens't recognize any type of command.
So if anyone can help me ill be glad.
Thanks in advance,
Matan.
matan4442 said:
Hi everybody,
ill try to make it short:
My 6p has entered into the bootlooping mode.
I have never unlocked the bootloader/changed ROM/kernal.
After I let it bootloop until the battery is dead it's changing from bootlooping into blinking red dot. Then when I charge it for a couple of minutes it comes back to life after 10~ min it's bootlooping again - so I have a window of possibilities to play with the setting. In that window I have used the "OEM unlocking" option.
In the bootlooping state when I boot into the bootloader and connect it into the PC the device doesn't recognize that it has been connected and a PC ,and the PC recognize a entry of new device but doesn't recognize it is a Nexus 6p. Matan.
Click to expand...
Click to collapse
What is the new device identified as....Qualcomm HS-USB QDLoader 9008? Your phone may be stuck in EDL mode. If that is the case you need to search XDA and attempt solutions for that problem first.
Did you previously have your PC setup properly with the correct USB drivers and it was working OK, or just now trying to get your dead phone to communicate? If the former it may be the EDL issue above. If it was the latter, the communication problem may just be the drivers were never set up in the first place. Have you tried a different cable or port on your PC, or another PC?
With no access to the OS you will be unable unlock the bootloader or access to ADB because those have to be enabled FIRST in the OS, so there's no helping you here until you can actually boot into the OS. Do you have access to Recovery mode? Tried a factory reset? If you don't have recovery, that was a major omission.