Related
Hi,
guess this will be more of a review as it is hard to say which feature i like BEST:
Got my MAX 3gb/64gb (helium) delievered yesterday. Since it came with the 7.3 MIUI first thing i had to do was read up on how to install the MIUI8 China dev rom to the device. After a bit of fiddling and translating chinese / indian websites i came up with a workable solution, even with the bootloader locked. So since yesterday evening i got MIUI8 6.6.23 running on the device - weeded out some apps i did not understand (chinese) and installed Play Store.
So far i must say - this phone is glorious. MIUI8 is fast and seemingly stable, i did not come across any big bugs and there doesnt even seem to be the typical micro-stuttering. Im really happy i bought the phone and hoping there will be a multilanguage (i.e. german) MIUI8 for it. For now im perfectly good with the Dev Rom and english localisation.
Thanks Xiaomi!
To anybody interested - flashing the China Development ROM (MIUI 8 6.6.23) with the locked bootloader was not exactly easy, here is how to:
- get the rom image from here: http://en.miui.com/thread-299033-1-1.html (be sure to download the Mi Max Pro fastboot image - 1418mb)
- get MiFlash Beta from here: http://xiaomitips.com/download/new-miflash-beta-one-click-install-miui-fastboot-rom/
- extract tgz fastboot image - keep folder structure!
- enable developer options -> usb debugging in additional settings then turn off phone
- boot phone into EDL mode (phone off, press simultaneously vol+&vol- then connect usb cable)
- open miflash beta - there should be an entry with "id 1" and "device" something like "COM10" in the bottom table now - SEE ATTACHED SCREENSHOTS!
- select the folder where extracted image is located
- tick "clean all" in the bottom right
- hit flash
- enjoy.
First of all, thank you for sharing this. I went step by step (vol up and down didn't work for me, tried power and vol up and device didn't show up in fast boot, did vol down and power and it showed up) then I flashed the image and it successfully flashed, when the device booted it still showed the 7.4.16 global stable Rom the vendor installed : /, I did it again and the same thing, the rom didn't change. could you please help/?
Sorry, I followed the steps exactly as described and it worked out perfectly, thank you very much, its just that when I pressed vol + and - I didn't see anything on the screen so I thought it wasn't working, miui 8 is nice indeed, could you explain how you installed the play store, the one on the Mi store is crashing on me.
it's a little tricky but there is a thread on here that should get you started. you have to use the Google installer and then update some Google components before you restart your phone.
Tapatalk on Mi Max
g_BonE said:
Hi,
Got my MAX 3gb/64gb (helium) delievered yesterday.
Click to expand...
Click to collapse
where you buy the 64 GB Mi Max ?
Greets, Peter
bought it through nis-store.com had it delivered 3 days later. can recommend. they ship with DHL.
Tapatalk on Mi Max
Is it possibile to get it rooted?
e753 said:
Is it possibile to get it rooted?
Click to expand...
Click to collapse
Nothing is impossible... Unlock bootloader (not even required anymore), flash TWRP, flash latest SuperSu or prerooted ROM... Done.
Hi, friends
I bought my first Xiaomi device, it' MI MAX Pro (snapdragon 652) I found other link MIUI 8 China Developer ROM 6.7.7 from en.miui, so I'm very confused what is difference between
MIUI 8 China Developer ROM 6.6.23 link from OP
http://en.miui.com/forum.php?mod=viewthread&tid=306329&extra=page=1&mobile=2
Please advise me.
Thank you.
memooffon said:
Hi, friends
I bought my first Xiaomi device, it' MI MAX Pro (snapdragon 652) I found other link MIUI 8 China Developer ROM 6.7.7 from en.miui, so I'm very confused what is difference between
MIUI 8 China Developer ROM 6.6.23 link from OP
http://en.miui.com/forum.php?mod=viewthread&tid=306329&extra=page=1&mobile=2
Please advise me.
Thank you.
Click to expand...
Click to collapse
6.6.23 is older (june 23)
6.7.7 is the newest sofar (July 7)
I use the weekly multi rom on my MI Max since its better tuned with translations and the china apps that I don't use are removed
https://xiaomi.eu/community/threads/6-7-7-11.32639/
the process for installing the new Version does not change with the newer miui8 6.7.7 so you're good to go with the same Instructions from OP.
Meanwhile on my Max I have boot loader unlocked and root. Works flawlessly with the new MIUI weekly Releases.
Tapatalk on Mi Max
I am on China stable rom
Already unlocked bootloader
Does official twrp hydrogen work properly with helium model?
nijel8 said:
Nothing is impossible... Unlock bootloader (not even required anymore), flash TWRP, flash latest SuperSu or prerooted ROM... Done.
Click to expand...
Click to collapse
May we ask you to share your experience for helium.
There are few resources for this device.
Thanx!
s2k7 said:
May we ask you to share your experience for helium.
There are few resources for this device.
Thanx!
Click to expand...
Click to collapse
I have hydrogen but reading the forums people are using same TWRP for helium. Just read XDA and official MIUI forums...
g_BonE said:
it's a little tricky but there is a thread on here that should get you started. you have to use the Google installer and then update some Google components before you restart your phone.
Tapatalk on Mi Max
Click to expand...
Click to collapse
Would you mind pointing that thread where it's explained?
Thanks a lot for you experience sharing,
I was wondering maybe you solved this: i can't get whatsapp to run on this rom, even with all permissions given, whatapps and skype cant access my contacts. I got my contacts on the system using the old google installer apk which worked wonders except now i can't get past the looking for backup screen in whatsapp.
If anyone has ideas pls let me know and in the meanwhile i will try to flash other roms to see if one works..
I answered my own question playing with the settings. You have to register under accounts mi accounts to unable contact sync for all apps .... ? anyway it all works now!
BTW I have updated MUIU using http://en.miui.com/download-302.html#446 new dev rom and followed instructions.
pocketjose said:
Would you mind pointing that thread where it's explained?
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=UgdsvrtFji0 follow that! step by step
ispeedca said:
I answered my own question playing with the settings. You have to register under accounts mi accounts to unable contact sync for all apps .... ? anyway it all works now!
BTW I have updated MUIU using http://en.miui.com/download-302.html#446 new dev rom and followed instructions.
Click to expand...
Click to collapse
Thanks heaps for the tutorial about installing Google Play services
By the way, can this rom you're talking about be flashed following the instructions by original poster?
Do I need to flash in first place the rom from original poster (MIUI 8 6.6.23) and then flash your new one (MIUI 8 6.7.14)?
Or can I flash directly latest one?
pocketjose said:
Thanks heaps for the tutorial about installing Google Play services
By the way, can this rom you're talking about be flashed following the instructions by original poster?
Do I need to flash in first place the rom from original poster (MIUI 8 6.6.23) and then flash your new one (MIUI 8 6.7.14)?
Or can I flash directly latest one?
Click to expand...
Click to collapse
I can't tell you for sure but i think you have to use the instructions from the muiu site if you want the lastest dev rom.
1- I used OP instructions and links to install muiu 8
2- updated to last china dev rom following muiu site instructions.
3- installed all gapps stuff
PS if you want to ROOT, do this between 2 and 3: (unlocked boot loader)
1-Download SuperSu to root Xiaomi Mi Max and copy it to your phone sd card from this site: http://www.stechguide.com/root-install-twrp-recovery-xiaomi-mi-max/
2-Download xiaomi twrp flasher and use it to flash from: http://forum.xda-developers.com/mi-max/development/tool-xiaomi-twrp-flasher-mauronofrio-win-t3405207
3-Follow instructions from step 9 : http://www.stechguide.com/root-install-twrp-recovery-xiaomi-mi-max/
Last thing im playing with trying to activate LTE bands on the phone. If anyone can help for that, i can't get the drivers to install propertly
Hi all I have finally got the Pixel experience rom booted on my mi max 3 with the fixes from this post https://forum.xda-developers.com/mi-max-3/how-to/guide-android-9-pie-aosp-phh-treble-rom-t3862708
To do is it takes a while but is worth it latest update 11/01/2019 is stable
ok here we go
first you need to flash or factory reset your phone on the latest china beta so as of today its 9.1.10
next downlaod the xiaomi.eu rom latest rom whatever it is
https://xiaomi.eu/community/threads/9-1-10.48651/
download the pixel rom for ARM64 A ONLY
https://github.com/EnesSastim/Downloads/releases THIS IS THE ACTUAL WEBSITE
HERES THE DIRECT ROM LINK
https://github.com/EnesSastim/Downl...A-2019-11-01/PixelExperienceP-arm64-aonly.zip
Magisk if you need it
https://github.com/topjohnwu/Magisk/releases/download/v18.0/Magisk-v18.0.zip
patches and fixes for brightness etc
https://forum.xda-developers.com/attachment.php?attachmentid=4680047&d=1546632878
ALL IN ONE TOOL USED TO FLASH TWRP
https://forum.xda-developers.com/android/software/tool-tool-one-driversunlocktwrpfactory-t3358711
OK HERES HOW TO INSTALL IT
FIRST COPY ALL FILES ABOVE TO YOUR PHONE THEN FOLLOW THIS GUIDE
Flash the original China dev via miflash (no lock Bootloader option tick). Because the original China dev Fastboot Rom recreate the original Partitions.
Start the system until welcome Screen(don't know why but it was one solution)
Then in Fastboot mode: Fastboot format userdata
Then flash newest original twrp in Fastboot. USING THE ALL IN ONE TOOL
Then install xiaomi.eu
Start system until welcome screen.
Reboot to recovery
Factory reset
Reboot to recovery
Install PixelExperienceP-arm64-aonly.IMG FROM 11/01/2019
Reboot recovery
Install magisk 18.0
REBOOT RECOVERY AGAIN
MOUNT AND MAKE SURE VENDOR IS MOUNTED
NOW FLASH THE ZIP FILE FOR THE FIXES
Reboot to system
HOPEFULLY IN ABOUT 5 MINUTES THE PHONE SHOULD BOOT UP ENJOY
:good:
Mistake
will the exFat SD sard could be read?
jacklau2000 said:
will the exFat SD sard could be read?
Click to expand...
Click to collapse
Yes, mine is working 100% fine, keep all my Maps and Spotify data on it.
Thanks, I will try it later.
What is this thread doing here...!? Did you build/developed anything! At least you could've integrated all "fixes" in a single install package... Otherwise what's different from other guides we already have.
nijel8 said:
What is this thread doing here...!? Did you build/developed anything! At least you could've integrated all "fixes" in a single install package... Otherwise what's different from other guides we already have.
Click to expand...
Click to collapse
Wrong section ! Move it to Guide one
Theseusperse said:
because in China they have 3 different Mi Max 3 variants: Nitrogen, Helium and Hydrogen, and the first firmware on the Chinese download page is to the 32GB Hydrogen Mi Max 3, which will actually work!
Click to expand...
Click to collapse
What? Mi Max 3 has just "nitrogen" codename.
"helium" and "hydrogen" are just Mi Max 1! First one is equipped with Snapdragon 652, second one is equipped with Snapdragon 650. I guess that if you'll flash helium/hydrogen firmware on nitrogen you'll get bricked
@moderator @admin @engloa @MikeChannon
Please MOVE this thread to its correct place: https://forum.xda-developers.com/mi-max-3/how-to
This is not an original developing/ROM Building as @nijel8 said...just a copy of this description:
china rom
where do i find thee china tgz rom for miflash? cant find it anywhere...
meruelodaniel said:
where do i find thee china tgz rom for miflash? cant find it anywhere...
Click to expand...
Click to collapse
:silly: You can find it on the Internet
Have try a lot of GSI rom on Max 3 and it's never smooth and stable like Miui (Xiaomi.eu for me)....wait a true custom rom
Totally agree with you
What happens if I don't install Chinese ROM, and flash this Pixel Experience ROM on Xiaomi.eu right away?
SerikKr said:
What happens if I don't install Chinese ROM, and flash this Pixel Experience ROM on Xiaomi.eu right away?
Click to expand...
Click to collapse
I do this and it's ok, but you'll see, it's not perfect
Shuyin10 said:
Have try a lot of GSI rom on Max 3 and it's never smooth and stable like Miui (Xiaomi.eu for me)....wait a true custom rom
Click to expand...
Click to collapse
I agree, they all have too many issues. It's been 7 months now and we don't have any custom ROM's despite this being one of the most popular Xiaomi phones (according to their offical forums and rom download stats), so why the hell is nooone developing for it? At this rate the Mi Max 4 will be out before the we even have a single native custom ROM.
I to was pissed off because there are no custom romI order another phone, not xiaomi and when i receive it will sell my mi max 3.I am not sure that will try xiaomi phones again..
I'm currently using Miui PRO - latest version and it is Android 9 - working flawlessly, no errors found so far and battery is pretty amazing Go on and try it guys, it's the best thing and it is regularly updated. Not changing my Mi Max 3 for anything so far. The russians have done amazing job with this rom
Havoc 2.0 is epic on this phone guys. I have been using for over a month now and its solid. Few issues were BT audio and adaptive brightness for which there are fixes. I using it right now and its solid and as stable as can be
shingers5 said:
Havoc 2.0 is epic on this phone guys. I have been using for over a month now and its solid. Few issues were BT audio and adaptive brightness for which there are fixes. I using it right now and its solid and as stable as can be
Click to expand...
Click to collapse
is wifi hotspot and google cam working as well?
can you confirm when you free please
also did you wipe system while installing that gsi image?
Released April 20, 2019 - 777.09MB
OmniROM Beta 1
Can it be installed on RNE-L21 (currently having OmniROM Pie Alpha 5.2)
Actually I am confused over EMUI version, Plz help shall I flash OmniROM Beta 1 from
fastboot and as per normal procedure described there
usman400 said:
Released April 20, 2019 - 777.09MB
OmniROM Beta 1
Can it be installed on RNE-L21 (currently having OmniROM Pie Alpha 5.2)
Actually I am confused over EMUI version, Plz help shall I flash OmniROM Beta 1 from
fastboot and as per normal procedure described there
Click to expand...
Click to collapse
I messed up, wrong post.
Edit: I've read that page and a believe you are good to go if you already are running one of their 9.0 builds
usman400 said:
Released April 20, 2019 - 777.09MB
OmniROM Beta 1
Can it be installed on RNE-L21 (currently having OmniROM Pie Alpha 5.2)
Actually I am confused over EMUI version, Plz help shall I flash OmniROM Beta 1 from
fastboot and as per normal procedure described there
Click to expand...
Click to collapse
I tested it, it does not start for us (emui 8.0).
*** it is only for emui 9.0 .
Chisetdel31260 said:
I tested it, it does not start for us (emui 8.0).
*** it is only for emui 9.0 .
Click to expand...
Click to collapse
Were you running one of the pie alpha builds?
AztekSoul said:
I messed up, wrong post.
Edit: I've read that page and a believe you are good to go if you already are running one of their 9.0 builds
Click to expand...
Click to collapse
Yup I am already on OmniROM Pie Alpha 5.2, which is Android 9 version
Thanks, I will give it a shot surely
I had 2 mate 10 RNE-L21 phones both having OmniROM Pie Alpha 5.2, so I tried OmniROM Beta 1 on one of
them and got bootloop on Factory Reset (it restarts around 20/25%)
usman400 said:
I had 2 mate 10 RNE-L21 phones both having OmniROM Pie Alpha 5.2, so I tried OmniROM Beta 1 on one of
them and got bootloop on Factory Reset (it restarts around 20/25%)
Click to expand...
Click to collapse
Yes, that's because you (we) need to wait the official update to Android 9 Pie, after that, we can flash these ROMs.
How is OmniROM Pie Alpha 5.2? Works fine? Battery life etc...?
davideakc said:
Yes, that's because you (we) need to wait the official update to Android 9 Pie, after that, we can flash these ROMs.
How is OmniROM Pie Alpha 5.2? Works fine? Battery life etc...?
Click to expand...
Click to collapse
Yup I was thinking like that as well
Yes ROM is very good, I am using it now on both phones, satisfied, only problem is stock camera
gets stuck if u switch between vdo/image, and some time even if u do not switch, still it will close after a while
So have to use Open camera or Google camera, for which I am not satisfied with both of them
usman400 said:
Yup I was thinking like that as well
Yes ROM is very good, I am using it now on both phones, satisfied, only problem is stock camera
gets stuck if u switch between vdo/image, and some time even if u do not switch, still it will close after a while
So have to use Open camera or Google camera, for which I am not satisfied with both of them
Click to expand...
Click to collapse
what about the microphone? recording and such? for instance, everytime I tried recording voice messages on Instagram or messenger it would always sound glitched/robotic
usman400 said:
Yup I was thinking like that as well
Yes ROM is very good, I am using it now on both phones, satisfied, only problem is stock camera
gets stuck if u switch between vdo/image, and some time even if u do not switch, still it will close after a while
So have to use Open camera or Google camera, for which I am not satisfied with both of them
Click to expand...
Click to collapse
Have you test this https://forum.xda-developers.com/pr...abled-device-development/9-0-omnirom-t3901305 ??
all I'd like to know is if there's any pie rom without the microphone problem
usman400 said:
Yup I was thinking like that as well
Yes ROM is very good, I am using it now on both phones, satisfied, only problem is stock camera
gets stuck if u switch between vdo/image, and some time even if u do not switch, still it will close after a while
So have to use Open camera or Google camera, for which I am not satisfied with both of them
Click to expand...
Click to collapse
How do you have installed the ROM?
I followed the guide on OpenKirin site but I'm stuck in the page says my device is unlocked and can't be trusted, I've pressed power key to confirm the boot but nothing, it says: "Your device is booting now" but it doesn't go on.
I've tried with another ROM (OmniROM Pie Alpha 5.2 and OmniROM Pie Alpha 4) but same error...
Why?
davideakc said:
How do you have installed the ROM?
I followed the guide on OpenKirin site but I'm stuck in the page says my device is unlocked and can't be trusted, I've pressed power key to confirm the boot but nothing, it says: "Your device is booting now" but it doesn't go on.
I've tired with another ROM (OmniROM Pie Alpha 5.2 and OmniROM Pie Alpha 4) but same error...
Why?
Click to expand...
Click to collapse
https://openkirin.net/user_guide/openkirin-rom-installation-instructions/
here you go, also the microphone isn't working in this Pie ROM either.
shevoK said:
https://openkirin.net/user_guide/openkirin-rom-installation-instructions/
here you go, also the microphone isn't working in this Pie ROM either.
Click to expand...
Click to collapse
I followed that guide but nothing.
Now I'm restoring it with eRecovery because the ROM doesn't start.
What you mean with "microphone isn't working"?
davideakc said:
I followed that guide but nothing.
Now I'm restoring it with eRecovery because the ROM doesn't start.
What you mean with "microphone isn't working"?
Click to expand...
Click to collapse
if you try recording a voice message, the sound is very glitchy and it has a lot of static in it, it's probably happening cause we don't officially have EMUI 9
tho it will release in july or late october for mate 10 lite
davideakc said:
I followed that guide but nothing.
Now I'm restoring it with eRecovery because the ROM doesn't start.
What you mean with "microphone isn't working"?
Click to expand...
Click to collapse
Hi,
I installed it on my rne-l21c432b338, then on b340 and on b341.
he always starts.
I use hurupdater to install the stock firmware. (check that you have the three firmware files of the same version.)
a faith installed, I go to REBOOT, select recovery. do factory rest and wipe cache. it restarts clean.
then connect to the PC.
with adb and fastboot, I install SYSTEM.img omnirom. (of course omnirom alpha 5.2
not the new version it is only for emui 9.)
faith flashed, unplug the cable and pushed it into recovery mode and make factory rest and wipe cache.
he starts for me.
Chisetdel31260 said:
Hi,
I installed it on my rne-l21c432b338, then on b340 and on b341.
he always starts.
I use hurupdater to install the stock firmware. (check that you have the three firmware files of the same version.)
a faith installed, I go to REBOOT, select recovery. do factory rest and wipe cache. it restarts clean.
then connect to the PC.
with adb and fastboot, I install SYSTEM.img omnirom.
faith flashed, unplug the cable and pushed it into recovery mode and make factory rest and wipe cache.
he starts for me.
Click to expand...
Click to collapse
In the past I had already installed a ROM from OpenKirin, but there was some problems with it and then I removed it with eRecovery. It has downloaded stock ROM (about 2,7GB if I remember right) and installed it. So I think I'm already on stock ROM (or am I wrong?)
Today I've tried to install 2 ROMs from OpenKirin and nothing happen, I get stuck on "The device is booting now..."
I've never used HuRUpdater (like I said before, I've always installed the stock ROM using eRecovery).
I don't understand what files I need (I know where to find files, here, but there I don't understand anything ahaha)
Probably is this the problem?
how do i upgrade to emui on my mate 10 pro is it even possible with an unlocked bootloader without relocking? the omnirom one is extremely laggy for me even the notificationpanel is extremely difficult to pull down, trying to install the latest rom thats for emui9 just gives a bootloop
Hi guys, sorry for posting here but I really need some help becasue I bricked my Mate 10 lite, here is a link for more explonation:
https://forum.xda-developers.com/mate-10/help/bricked-mate-10-lite-t3926714
Thanks in advance
shevoK said:
what about the microphone? recording and such? for instance, everytime I tried recording voice messages on Instagram or messenger it would always sound glitched/robotic
Click to expand...
Click to collapse
I never tried that thing, calls work fine on Phone and Whatsapp etc.
It appears MIUI 11 (Chinese Beta only) for the Redmi Note 4/4X is available for testing. You can download it via the page below:
https://www.xda-developers.com/download-miui-11-beta-now-for-13-xiaomi-devices-changelog/
I believe you can flash it via TWRP, make sure to do the lazyflash afterwards or it may bootloop.
New 9.9.25 is out...download here
Its recommended to use orangefox recovery
Saky22 said:
New 9.9.25 is out...download here
Its recommended to use orangefox recovery
Click to expand...
Click to collapse
where can i find the link to update?
New 9.9.26 update here
From telegram group
For me, I have chosen to stay with MIUI 9 since last year because the MIUI 10 broke the Google Camera. I have never updated since then.
If anyone is currently testing this beta MIUI 11, would you be able to let us know here if Google Camera works for this now?
yohyah said:
For me, I have chosen to stay with MIUI 9 since last year because the MIUI 10 broke the Google Camera. I have never updated since then.
If anyone is currently testing this beta MIUI 11, would you be able to let us know here if Google Camera works for this now?
Click to expand...
Click to collapse
Up. I hope in miui 11 works out of the box
How do I get Gapps to work?
Hirs_E_Fruit said:
How do I get Gapps to work?
Click to expand...
Click to collapse
Try this
https://forum.xda-developers.com/mi-pad-4/how-to/guide-install-google-play-china-rom-t3841149
Hello Guys
I just received MI 9T EEA variant. I want it to update to MIUI 12 but i can't apply MIUI 12 update directly because the system version is old MIUI V11.0.3.0.PFJEUXM and i am not able to apply my downloaded MIUI 12 because it needs an updated software version. Bootloader is locked and i have to wait 7 days to unlock. Is there a way to quick update it to MIUI 12 instead of step by step updates?
Get thru the 5GB of updates just like i did, updated it from MIUI 10 (didn't check the version) to MIUI 12.. but did it step by step
ammaralidj said:
Hello Guys
I just received MI 9T EEA variant. I want it to update to MIUI 12 but i can't apply MIUI 12 update directly because the system version is old MIUI V11.0.3.0.PFJEUXM and i am not able to apply my downloaded MIUI 12 because it needs an updated software version. Bootloader is locked and i have to wait 7 days to unlock. Is there a way to quick update it to MIUI 12 instead of step by step updates?
Click to expand...
Click to collapse
You can try the following:
- Download the latest QFJEUXM (supposing you are on *FJEUXM = eea) 12.0.2 Recovery/zip package to your phone from:
https://xiaomifirmwareupdater.com/miui/davinci/
- Go to Settings, Update and tap seven (or so) times over the big 11 (MIUI version number) in the center
- That would unhide few additional options in the menu (three dots top right), namely the option: Choose update package
- Take that option and navigate to the downloaded zip package for 12.0.2
If it doesn't want to update directly, it would probably tell you (once, by mistake I tried updating from eea to global and it stopped me telling that it's not the right package for my phone), then I used the eea package and it worked fine (but I was not jumping from MIUI 11.03 to 12.0.2)
This method does not require the unlocked Bootloader (root, flashing, anything special)
zgfg said:
You can try the following:
- Download the latest QFJEUXM (supposing you are on *FJEUXM = eea) 12.0.2 Recovery/zip package to your phone from:
https://xiaomifirmwareupdater.com/miui/davinci/
- Go to Settings, Update and tap seven (or so) times over the big 11 (MIUI version number) in the center
- That would unhide few additional options in the menu (three dots top right), namely the option: Choose update package
- Take that option and navigate to the downloaded zip package for 12.0.2
If it doesn't want to update directly, it would probably tell you (once, by mistake I tried updating from eea to global and it stopped me telling that it's not the right package for my phone), then I used the eea package and it worked fine (but I was not jumping from MIUI 11.03 to 12.0.2)
This method does not require the unlocked Bootloader (root, flashing, anything special)
Click to expand...
Click to collapse
Thank you for reply. I already tried this method but it didn't update from MIUI 11 to MIUI 12 but its working for step by step upgradation, but this process is very slow because my internet is just ****ty
Finally updated to MIUI 12
Sent from my Redmi Note 8 using Tapatalk
ammaralidj said:
Finally updated to MIUI 12
Sent from my Redmi Note 8 using Tapatalk
Click to expand...
Click to collapse
Do you like Miui 12 better or do you regret it?
Princeland said:
Do you like Miui 12 better or do you regret it?
Click to expand...
Click to collapse
Actually i am AOSP based custom rom user but as i need to wait 7 days for bootloader unlock, i have to use MIUI and there are some new things in MIUI 12 and that's the only reason to update to MIUI 12. I can't say about battery life right now but the new UI is good.
ammaralidj said:
Actually i am AOSP based custom rom user but as i need to wait 7 days for bootloader unlock, i have to use MIUI and there are some new things in MIUI 12 and that's the only reason to update to MIUI 12. I can't say about battery life right now but the new UI is good.
Click to expand...
Click to collapse
Ok, I'll be on the lookout for a new post before you go to AOSP to see your final assessment so I can get a more concrete idea on whether it's better to stay on Miui 11 or go up to Miui 12 ... I've read a lot of bad things about the battery or lag throughout the interface. A greeting!