{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
crDroid 6.x: https://github.com/crdroidandroid/crdroid_features/blob/10.0/README.mkdn
crDroid 7.x: https://github.com/crdroidandroid/crdroid_features/blob/11.0/README.mkdn
crDroid 8.x: https://github.com/crdroidandroid/crdroid_features/blob/12.1/README.mkdn
Flashing Instructions:
Pre-installation:
OrangeFox (Download from here)
Gapps (Download from here)
Magisk 23 or newer for root (after first boot) - (Download from here)
First time installation:
Download the ROM, GApps (Optional), Magisk (Optional) from the links above.
Wipe System, Vendor, Data, Dalvik, Cache.
Flash the ROM, GApps (Optional), Magisk (Optional).
Reboot
Update installation:
Wipe System, Vendor, Dalvik, Cache or only Dalvik, Cache.
Flash the ROM, GApps (Optional), Magisk (Optional).
Reboot
Sources:
ROM: https://github.com/crdroidandroid
Kernel: https://github.com/crdroidandroid/android_kernel_xiaomi_msm8937
Download:
ROM Sourceforge
Changelog:
crDroid 6.x: https://raw.githubusercontent.com/c..._vendor_crDroidOTA/10.0/changelog_santoni.txt
crDroid 7.x: https://raw.githubusercontent.com/c..._vendor_crDroidOTA/11.0/changelog_santoni.txt
crDroid 8.x: https://raw.githubusercontent.com/c..._vendor_crDroidOTA/12.1/changelog_santoni.txt
Known issues:
- FPC fingerprint doesn't work on encrypted device
- VoLTE SIM switching (only crDroid 8.x)
Visit official website @ crDroid.net
crDroid Santoni Telegram
crDroid Community Telegram
Donate to help our team pay server costs
Bootloop on trying to encrypt.
Sent from my MI PAD 4 using Tapatalk
Labaga said:
Bootloop on trying to encrypt.
Sent from my MI PAD 4 using Tapatalk
Click to expand...
Click to collapse
The issue will be resolved in the next crDroid 6 release.
It fixed now. Enjoy.
Installed CRDroid 7 2 weeks ago and it seems to work like a charm !
Still no support for wifi via eap sim nor fonctionning android auto (wich could be a great enhancement ;p) but overalll great all day rom!
Thx for the build
Is it possible to impement radio FM into this ROM?
Apart from this lack in my opinion is great!
Hi everybody, crdroid 7 is based on android 11, right?
Where can I get gapps for android 11?
Thank you
vasskliss said:
Hi everybody, crdroid 7 is based on android 11, right?
Where can I get gapps for android 11?
Thank you
Click to expand...
Click to collapse
Visit official website crDroid.net - Download crDroid for Redmi 4X (santoni)
@vasskliss, I use NikGapps+crDroidAndroid-11.0-20201215-santoni-v7.1...with BitGapps was a problem Chrome browser not synchronizing.
I installed the 7.1 on Santoni, and I say that it is PERFECT rom, 1% discharge over the night, fast, correct!!!
Congratulation for the maker!!!
A big problem is that "Mobile network" greyed out in the settings! I just could switch on the Mobile data by pull down menu, but I had to search the "SIM" word in the menu because the mobile data didn't work I had to rest APN and I worked hard with switching on and off and after all it works and I have internet mobile data connection however the Mobile network is greyed out yet... Any idea?
One disappointment: Android Auto installed from Nikgapss and it is impossible to exceed the "Display over other apps" settings, though it is enabled or not it could not be step over this point... any suggestion?
blackbile said:
One disappointment: Android Auto installed from Nikgapss and it is impossible to exceed the "Display over other apps" settings, though it is enabled or not it could not be step over this point... any suggestion?
Click to expand...
Click to collapse
Et violá - HERE is the solution:
I made two change in my system, I don't know which was the solution or both needed:
1.
Check all the other permissions that Android Auto might need. For me, the notification access permission was disabled for some reason, but Android Auto never took me to that setting until after I rebooted. There are instances where apps need some permissions toggled off then on again in order to work properly after an update. For instances, after updating LightFlow, the app gets me to toggle notification access off and on.
source: https://android.stackexchange.com/q...eeps-asking-to-enable-drawing-over-other-apps
Yep - it was disabled in my system!!!
UPDATE: it is not enough alone! It needs flashing SafetyPatch v3!
2.
Android Auto works when you do this steps:
flash magisk
flash SafetyPatch v3: https://magiskroot.net/md/SafetyPatch-v3.zip
Activate MagiskHide Probs Config
source: https://gitlab.com/LineageOS/issues/android/-/issues/1930
Well, I had already Magisk and enabled MagiskHide Probs Config! I disabled it, installed SafetyPatch v3 from Magisk and rebooted and enabled MagiskHide Probs Config.
After all I connected USB cable to my car and I could enable and stepped over the "Display over other apps" settings.
installed the 7.1 version + nikgapps basic package yesterday and its working like a charm, congrats again to the developers, no issues so far and the battery is also pretty good;
its amazing how our modest device keeps getting updates to the latest android versions thanks to the amazing work of the community
pckloss said:
Is it possible to impement radio FM into this ROM?
Apart from this lack in my opinion is great!
Click to expand...
Click to collapse
Next build FMRadio will be added crDroid 7.1
Yep, the radio is working... but doesn't show channel names...
blackbile said:
Yep, the radio is working... but doesn't show channel names...
Click to expand...
Click to collapse
crDroid 6.x it shows channel name? i never seen channel name.
I thought that it is like an RDS device which shows the name of the radio...
hi guys, thanks jabieff for the rom, awesome work! Am i the only one with charging slowly problem? (the battery info on lockscreen (nice feature by the way) keeps fluctuating in 60 to 600mA range)
xandefloripa said:
hi guys, thanks jabieff for the rom, awesome work! Am i the only one with charging slowly problem? (the battery info on lockscreen (nice feature by the way) keeps fluctuating in 60 to 600mA range)
Click to expand...
Click to collapse
I have not any problem: 1,5A max. charging current.
You maybe have weak quality cable or adapter...
blackbile said:
I have not any problem: 1,5A max. charging current.
You maybe have weak quality cable or adapter...
Click to expand...
Click to collapse
I'm coming from the pixel experience rom (android 10), and in computer was slow charge, in the charger was fast. So I don't think is a hardware issue...but thanks mate
I really enjoy the ROM when the phone is on. Great to have a Android 11 on my Redmi 4x! Works very welland i haven´t found any bugs so far.
I used Syberian at first, then Lineage 16 and now this.
But i have some issue with it and i don´t know how to solve them:
I have to shutdown my phone every day. (Working in a security company) and i have to press the power button for like 15 seconds to turn it on again!?!? Is this Rom or OrangeFox Recovery "issue"?
I cant Reboot my phone, not into system, recovery or bootloader.
Today i shut down my phone with 48% battery, as i want to turn it on again it shuts down and the battery was empty.
i am on GEN_PACK-1_V048 Firmware...
thanks for the ROM
Related
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features
Click for feature list (helps shorten the OP.)
Always Have a full functional Backup. Just in case!
DOWNLOAD ROM
GAPPS: DOWNLOAD GAPPS
First time installing crDroid to your ENTER-PHONE-NAME, or coming from another ROM: <--THESE MAY NEED UPDATING FOR YOUR PARTICULAR DEVICE; BE THOROUGH IN INSTRUCTIONS-->
** Make sure you're running a proper working Recovery (CWM or TWRP)
1) Copy crDroid zip, gapps zip <--& vendor img, if applicable--> to your device
2) Boot into Recovery
3) Wipe cache, system, & data (or just cache & system for a dirty flash).
4) Flash ROM
8) Flash gapps
9) Boot up
For root, AFTER you boot into the ROM, you can go back to recovery and install Magisk XX.x (whatever is most recent).
Upgrading from earlier version of crDroid:
The only difference between clean flash as above and upgrading is you just wipe system & cache, leaving data. Everything else is the same. ***Remember to always clean flash before reporting problems. Clean flashing is always the best method of ROM install.
KNOWN ISSUES
LIST-KNOWN-ISSUES-ON-YOUR-DEVICE-HERE
Don't expect any support if you:
- are not running the included kernel
- have installed any mods such as Xposed!
- have modified system files
Thanks to:
- ENTER-SPECIFIC-THANKS-HERE-IF-YOU-HAVE-THEM
- Google
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
DONATE
Hit Thanks :good: if you liked it!
crDroid G+ community
XDA:DevDB Information
crdroid, ROM for the Lenovo P2
Contributors
ruturajjena, Subham, arghyac35, Priyesh, Firelord
Source Code: https://github.com/crdroidandroid
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: unlocked bootloader, TWRP
Based On: Lineage OS
Version Information
Status: Stable
Current Stable Version: 4.6
Created 2018-05-13
Last Updated 2018-08-27
Thank you very much dev!!!
Omg, quotes full op to say thx, dont do that!
There is a dedicated button just for this purpose.
Regarding the rom - i took a quick look at it, but iam missing blurr effect if u pull down notifications, which i fell in love with. But its good to see, that there r more and more los-based oreo roms with fp-gestures working.
Imo, best customizations, including the mentioned blurr effect, and fp-gestures comes with RR.
Screenshot please?
For some reason this failed to recognize my jio India sim. Signal strength is very week with airtel as well. Anyone else.? Going back to Los 15.1
What's the difference between this ROM and the one by gamefreaksuraj?
IshtaNoob said:
What's the difference between this ROM and the one by gamefreaksuraj?
Click to expand...
Click to collapse
This is made from the new sources of subham and firelord, probably less bugs.
potatoman4321 said:
This is made from the new sources of subham and firelord, probably less bugs.
Click to expand...
Click to collapse
Would it be acceptable to dirty flash this over the other crdroid...? It'll be a hassle to install everything all over... Plus, the other one has FP gestures.
IshtaNoob said:
Would it be acceptable to dirty flash this over the other crdroid...? It'll be a hassle to install everything all over... Plus, the other one has FP gestures.
Click to expand...
Click to collapse
You can try it, but i think you will get issues, because it's from other sources. This rom has fp gestures to.
Forced closed of startup wizard, cant continue set up
Truzzman2 said:
Forced closed of startup wizard, cant continue set up
Click to expand...
Click to collapse
restart system...
or,
reboot in recovery, clean dalvik/art/cache
for me, evrythink is ok!
used this rom for one day, then I restarted the phone, but phone keeps hanging on bootanimation screen
potatoman4321 said:
used this rom for one day, then I restarted the phone, but phone keeps hanging on bootanimation screen
Click to expand...
Click to collapse
with me too! I'm going back to the great bootleggers rom!
wlan1 said:
restart system...
or,
reboot in recovery, clean dalvik/art/cache
for me, evrythink is ok!
Click to expand...
Click to collapse
Thanks, setup ok
---------- Post added at 12:42 PM ---------- Previous post was at 12:41 PM ----------
WPS doesn't works, tested whit two different router
potatoman4321 said:
used this rom for one day, then I restarted the phone, but phone keeps hanging on bootanimation screen
Click to expand...
Click to collapse
U have to press home button for home screen to appear
Sohit5s said:
U have to press home button for home screen to appear
Click to expand...
Click to collapse
Tried that but didn't work
Well, unlike previous posters, I've had no issue so far. Clean flashed, flashed pico gapps and magisk, and everything went fine. No problems rebooting, no need to press anything.
Just flashed Subham's kernel, and it's still working fine
Bluetooth is always on. Paired only with xiaomi mi band 2. Huge battery drain!!!
Sent from my Lenovo P2 using Tapatalk
abderazakallouch said:
Bluetooth is always on. Paired only with xiaomi mi band 2. Huge battery drain!!!View attachment 4502363
Sent from my Lenovo P2 using Tapatalk
Click to expand...
Click to collapse
I tried leaving bluetooth on for a few hours, and got 63% battery usage from it, with nothing paired.
Still about 7h SoT, which is usual for me, so I'm guessing it's a misread, and not an actual drain. Will try a full charge with BT on and see the resulting SoT.
I cannot find fingerprint anywhere, phone is encrypted.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience for Redmi 5 Plus [vince]
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential features for the proper functioning of the device
Based on Android 9.0
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FMRadio
Fingerprint reader
Lights
Sound / vibration
Facelock
Known issues
Nothing
DON'T FLASH GAPPS, ALREADY INCLUDED
Download from Pixel Experience website
Translation
Help with project translation
Telegram channel
Stay tuned
Android OS version: 9.0.0_r16
Security patch level: November 2018
Build author: LuizH007
Source code: https://github.com/PixelExperience
ROM Developer: LuizH007
XDA:DevDB Information
Pixel Experience, ROM for the Xiaomi Redmi Note 5 / 5 Plus
Contributors
LuizH007, jhenrique09, rama982
Source Code: github.com/pixelexperience
ROM OS Version: 9.x Pie
Based On: AOSP
Version Information
Status: Stable
Created 2018-11-08
Last Updated 2018-11-10
Nice smooth rom.
Volte also working?
Hi! I'm using latest unofficial build (11-06), are there differences between this two releases?
Not even booting for me..
I flashed PE and magisk..
Wiped caches..
Reboot to system..
Then it shows to enter decryption password
After checking it reboots and stuck on black screen..
I never faced such issue with any rom..
I tried to install this last week but it constantly reboots all the time. It seems to stop rebooting when my sim connection is off. Can someone post the steps on how to flash this rom cause maybe im missing some steps during installation thats why its rebooting. Now im back on PE that i got on xda and not on their official website. This seems to be stable except for the hotspot that is not working. TIA
Ravi_sh594 said:
Not even booting for me..
I flashed PE and magisk..
Wiped caches..
Reboot to system..
Then it shows to enter decryption password
After checking it reboots and stuck on black screen..
I never faced such issue with any rom..
Click to expand...
Click to collapse
I also encountered this problem, its because of the automatic encryption of MIUI ROM.
This is how I solved it:
1. Boot to fastboot, then format userdata (fastboot format userdata)
2. Flash OrangeFox, then complete wipe
3. Install the ROM
---------- Post added at 03:04 AM ---------- Previous post was at 02:58 AM ----------
I tried this ROM yesterday and compared it with AEX Pie.
This is much better for users who prefer Pure AOSP.
Fast, stable, and beautiful UI.
Thanks dev :good:
oh sweet
please provide step by step installation guide for new user to install this rom from stock Miui10
Is this different with PE Extend or is the same rom ?
AbdulNadeem2 said:
please provide step by step installation guide for new user to install this rom from stock Miui10
Click to expand...
Click to collapse
Unlock your bootloader > Install TWRP (such as orange fox TWRP) > Clean Flash (wipe data, system, cache, dalvik) > Install the rom and dont forget to back up your data in case something goes wrong do it with your own risk.
Volte Didn't work
Any gcam ports that work in this rom?
Just now I enable cam2api and the default camera take green image.
Bugs that I found:
- Charging LED Indicator doesnt work.
- Finger Print works slow (2-3 seconds) while phone is sleeping.
- Sometimes it doesnt respond to my FP, then 2nd time it recognizes.
Except that it is a perfect rom for me.
Mahmud08 said:
Only one bug that I found is:
- Charging LED Indicator doesnt work.
Except that it is a perfect rom for me.
Click to expand...
Click to collapse
Is it as stable as oreo?
Crusiefire said:
Is it as stable as oreo?
Click to expand...
Click to collapse
I didnt use oreo version of pixel experience and yeah this one is stable. didnt crash yet. I am using for more than a week.
Writing Last updated 2018-11-07 on the first page.
In official site has 2018-10-24 version. WTF?
alieserizm said:
Writing Last updated 2018-11-07 on the first page.
In official site has 2018-10-24 version. WTF?
Click to expand...
Click to collapse
Yeah I think that was beta and now it's stable but rom is of an earlier date
For the people compaining about random reboots, download and install the latest MIUI10 developer ROM using MiFlash, then re-install your custom recovery and the ROM. Other users have reported that this procedure solves that problem. (or you can just flash the latest firmware using a custom recovery, I don't like this way because it caused problems in other Redmi device, but is your choice).
While trying the latest available OFFICIAL build (10/24th)
0.- UI is a little bit laggy. Things get worse if you use a live wallpaper, so avoid them and use a lighter launcher if possible.
1.- Youtube and other cast-enabled apps won't detect cast receivers in the network (no cast button in the app), the screen mirroring settings can detect them but trying to connect to any receiver results in a soft-reboot (SystemUI crashes).
2.- Wifi hotspot is broken.
3.- Waking up the device (either using the power button or the fingerprint sensor) takes almost 1 second.
4.- Automatic brightness is too high, and the minimum brightness (moving the slider to the left and disabling automatic brightness) is too low.
5.- Battery life seems subpar compared to Oreo builds (even if using greenify or similar apps). Is not *that* bad (like 1 hour less of SOT), but it seems like the kernel or the battery management settings still need customization (inb4 "use greenify").
6.- Some times the gesture-based navigation don't work or crashes (swipe up to see recents stops working and quick app switch doesn't work). This started happening after installing another launcher, when it happens the device must be restarted to make it work again). So, if possible, keep the old navigation buttons enabled.
Just as a sidenotes:
* After installing the Magisk ZIP, the Magisk Manager APK must be donwloaded and installed manually.
* Device fingerprint can be altered using Magisk to pass Safety Net without issues. vince's and whyred stock MIUI fingerprints works just fine.
* Camera2 is disabled. Can be enabled manually by altering build.prop, or by Magisk modules. After enabling it, ARnova's GCAM modded APK works flawlessly. Snap camera it's still crap.
*
Greetings!
Yong_Uno said:
Is this different with PE Extend or is the same rom ?
Click to expand...
Click to collapse
It's not the same rom. PE extended is, as the name suggests, an extended version of pixel experience (this rom)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
<<< WARNING >>> <<< WARNING >>> <<< WARNING >>>
Please note that this is still under development, so don't install unless you want to live with some bugs
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Flashing Instructions:
1. Download the ROM, Magisk (Optional) from the links above.
2. Wipe System, Data, Dalvik, Cache.
3. Flash the ROM, Magisk (Optional).
4. Reboot and Enjoy.
Sources:
ROM - https://github.com/crdroidandroid
Kernel source - https://github.com/davidviba/kernel_kuntao_BlaZeMaX
Download:
ROM - CRDROID V6.0
XDA:DevDB Information
[ROM][10.0][kuntao] crDroid v6.0 [05.11.2019], ROM for Lenovo Vibe P2
Contributors
DeGRuS
ROM OS Version: Android 10
ROM Kernel: Linux 3.18.x
ROM Firmware Required: TWRP
Version Information
Status: Stable
Created 2019-11-05
Last Updated 2019-12-19
Initial Build: 05/11/2019
— Supporting both F2FS and Ex4 Data partition file system
— Supporting 2 GB Zram Swap
— Enhenced Misound Inbuilt
— Vendor Cleaned and more optimized
— More and more stuff to be discoverd
Change log 19/12/2019
* December Security Patch R16
* Fingerprint Gesture Full working
* Vendor Blob Full Updated
* WFD Full Working Sound and Picture
* Xiaomi Part (Dirac sound, Vibration intensity, Screen color option, Spectrum option)
* Sepolicy Enforcing Full Working
I'm downloqding the rom
I'll post if i find any bug
I hope fp gestures work
degrus said:
Initial Build: 05/11/2019
— Supporting both F2FS and Ex4 Data partition file system
— Supporting 2 GB Zram Swap
— Enhenced Misound Inbuilt
— Vendor Cleaned and more optimized
— More and more stuff to be discoverd
Click to expand...
Click to collapse
I flashed the ROM but when i reboot crdroid logo shows up then it asked me for pin code I entered the right pin code but it keep telling wrong pin then I went to twrp because it ask for the pin also I entered the pin and everything is okay then reflashed my old ROM
The Home/Launcher app's App drawer settings are empty!
Any suggestions about what i reported
HACKIMTOSH said:
Any suggestions about what i reported
Click to expand...
Click to collapse
Try this https://forum.xda-developers.com/showpost.php?p=80744349&postcount=39
Flashed it today, but had to backup all data and format internal storage. Rom kept asking for the pin code at startup, but even with the correct code, phone doesn't boot.
Rom is pretty much stable, has lots of features but I also found some bugs
Since gapps are included, I couldn't restore all my apps, settings call logs etc
- scrolling the settings menu is a bit weird, notice the search bar dissapearing
-navigation bar appears after every reboot, even if it shows disabled. To disable it I had to re enable and the n disable only to find out that it would appear again after next reboot.
Dev, if you read this, please have a look. And thanks for the work!
HACKIMTOSH said:
I flashed the ROM but when i reboot crdroid logo shows up then it asked me for pin code I entered the right pin code but it keep telling wrong pin then I went to twrp because it ask for the pin also I entered the pin and everything is okay then reflashed my old ROM
Click to expand...
Click to collapse
You have to wipe data and then you can freely install the ROM and have fun with it. The phone needs to be decrypted for the ROM to work.
TheEvilSkeleton said:
You have to wipe data and then you can freely install the ROM and have fun with it. The phone needs to be decrypted for the ROM to work.
Click to expand...
Click to collapse
That means no FP gestures. Unacceptable for me.
Wysłane z mojego Lenovo P2a42 przy użyciu Tapatalka
I have a bootloop problem...!?
Android auto
Hello
I just got to say I've tried the ROM it is awesome, the only problem I had is the ANDROID AUTO app, it is not loading properly on the cars screen it recognizes the phone.
Then it wouldn't load properly on the cars screen it remains black and the phone freezes and reboots.
To me it is a real concern, and just because of this problem I had to quit this awesome ROM and load back PIE.
Just for the record I have tried all of the ROMS running out for the ANDROID 10 AND out of this problem which they all have they are not as smooth as this ROM (personal opinion).
I hope to get a nice reply with a solution if there is one.
Cheers
LEIBE said:
Hello
I just got to say I've tried the ROM it is awesome, the only problem I had is the ANDROID AUTO app, it is not loading properly on the cars screen it recognizes the phone.
Then it wouldn't load properly on the cars screen it remains black and the phone freezes and reboots.
To me it is a real concern, and just because of this problem I had to quit this awesome ROM and load back PIE.
Just for the record I have tried all of the ROMS running out for the ANDROID 10 AND out of this problem which they all have they are not as smooth as this ROM (personal opinion).
I hope to get a nice reply with a solution if there is one.
Cheers
Click to expand...
Click to collapse
try to flash Full Gapps or Aroma Gapps and see the result
degrus said:
try to flash Full Gapps or Aroma Gapps and see the result
Click to expand...
Click to collapse
did it no success
CrDroid or havoc which will be good?
Best android 10 for p2 ever
Excellent rom
So smooth
So FP gestures are not working on this one either? They used to on CrDroid 5.2.
Fp gesture working in this rom
momen.helal said:
Fp gesture working in this rom
Click to expand...
Click to collapse
That's incredible!!!!
Hahaha
momen.helal said:
Fp gesture working in this rom
Click to expand...
Click to collapse
This rom only fp gestures work. Others not work
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/12.1/README.mkdn
Flashing Instructions:
Pre-installation:
Recommended recovery (Recovery)
gapps (mindthegapps)
First time installation:
1. Flash latest firmware
2. Unlock bootloader
3. Flash recovery
4. Format /data
5. Flash ROM
6. Flash Gapps, Magisk (optional)
7. Reboot
Update installation:
1. Download new build
2. Flash as usual (without formatting data)
3. Reboot
Sources:
ROM: https://github.com/crdroidandroid
Kernel: kernel_xiaomi_sm6150
Download:
ROM: crDroid
Changelog:
https://crdroid.net/toco/8
Known issues:
none?
Visit official website @ crDroid.net
crDroid Community Telegram
crDroid Updates Channel
Donate to help our team pay server costs
reserved
P.S: for working OTA pls use the suggested recovery.
reserved x2
How fast does it charge?
I’m currently using Fork LineageOS 18.1, the charging speed with it is really slow.
Jisaka said:
How fast does it charge?
I’m currently using Fork LineageOS 18.1, the charging speed with it is really slow.
Click to expand...
Click to collapse
Fast charging should work fine. Otherwise, try changing your charging cable
IGor2Orel said:
Fast charging should work fine. Otherwise, try changing your charging cable
Click to expand...
Click to collapse
For this ROM specifically? I've used HavocOS 4.8 before switching to Fork LineageOS 18.1 and it worked like it should, only after the ROM-change it got really slow. (Using the same cable)
Jisaka said:
For this ROM specifically? I've used HavocOS 4.8 before switching to Fork LineageOS 18.1 and it worked like it should, only after the ROM-change it got really slow. (Using the same cable)
Click to expand...
Click to collapse
i didn't say you have to get another one. i only suggested what can you try if it won't work
IGor2Orel said:
i didn't say you have to get another one. i only suggested what can you try if it won't work
Click to expand...
Click to collapse
Yeah, i know.
It just seems weird to me that it works with one ROM and doesn't work for another.
Wondering if it would work again after switching to your version of crDroid.
Everything works fine, thank you for this awesome work.
I took the latest edition of this rom for a spin, used the latest firmware 12.5.7, latest nikgapps, latest vantom kernel. Installed in order format data, flash firmware, rom, gapps, kernel, format data, boot rom.
Everything is fine except for one problem, also commonly found on stock xiaomi phones from my co-workers which is, i cant reach emergency services.
I work as an ambulance medic and when i dialed 124 i got an automated voice which i can not bypass in any way. This is my first time ever experiencing this on a custom rom. I also cant call police or firefighters.
So i have no choice but to use another rom.
sage of six paths said:
I took the latest edition of this rom for a spin, used the latest firmware 12.5.7, latest nikgapps, latest vantom kernel. Installed in order format data, flash firmware, rom, gapps, kernel, format data, boot rom.
Everything is fine except for one problem, also commonly found on stock xiaomi phones from my co-workers which is, i cant reach emergency services.
I work as an ambulance medic and when i dialed 124 i got an automated voice which i can not bypass in any way. This is my first time ever experiencing this on a custom rom. I also cant call police or firefighters.
So i have no choice but to use another rom.
Click to expand...
Click to collapse
more likely it's your gapps package. everything works fine here.
oh yea, consider using the absolute bare minimum it provides
IGor2Orel said:
Click to expand...
Click to collapse
7.14 is the latest for now, 8 eta soon i guess
IGor2Orel said:
more likely it's your gapps package. everything works fine here.
oh yea, consider using the absolute bare minimum it provides
Click to expand...
Click to collapse
I used nickgapps basic or the one above..I moved back to evox 12 because of the issue ive had and because i had a pretty big battery drain. Now i suspect it could be the firmware since i had that drain on your rom and msm 12 as well, same latest vantom kernel. I moved to 12.5.4 and latest evox and no issues at all. The above basic package has all the apps i would use anyways, and i believe that the evox comes with flame or nikgapps full.
If I install this rom and recommended gapps, will the play store be certified? and will the google pay work?
Answering myself: YES! everything works great!
My bluetooth isnt working properly, it keeps disconnecting even though it works for a short time.
Logcat says:
Fatal signal 11 (SIGSEGV), code 1 (SEGV_MAPERR), fault addr 0x20 in tid 12126 (bt_main_thread), pid 12082 (droid.bluetooth)
Any update about crDroid 8.x ?
cr8 is out
v8.7 is out! check crdroid.net for changelog and downloads. miui camera included
Awesome rom! works very good! Thanks for your job!
Toons of customizations!
I noticed 2 problems:
- on camera: when I select 0.6x, app says "can't connect to the camera"
- o screen dt2w seems not working
kobra_89 said:
Awesome rom! works very good! Thanks for your job!
Toons of customizations!
I noticed 2 problems:
- on camera: when I select 0.6x, app says "can't connect to the camera"
- o screen dt2w seems not working
Click to expand...
Click to collapse
1. expected behaviour, works in pro mode and video anyway
2. dt2w works
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/12.1/README.mkdn
Flashing Instructions:
Pre-installation:
OrangeFox (Download from here)
Magisk 20.0 or newer for root (after first boot) - (Download from here)
First time installation:
Wipe necessary partitions
Format data
Flash DFE if needed & reboot recovery
Flash ROM package
Flash GApps/Magisk (your choice)
Update installation (dirty flash):
Boot to recovery
Flash ROM package
Wipe cache
Reboot
Update installation (clean flash):
Wipe necessary partitions
Format data
Flash DFE if needed & reboot recovery
Flash ROM package
Flash GApps/Magisk (your choice)
Sources:
ROM: https://github.com/crdroidandroid
Kernel: Platinum Kernel
Download:
ROM https://crdroid.net/vince
Changelog: https://crdroid.net/vince/8#changelog
Known issues:
None so far, you tell me
Visit official website @ crDroid.net
crDroid vince Telegram
crDroid Community Telegram
crDroid Updates Channel
Donate to help our team pay server costs
rk134 said:
Flash DFE if needed & reboot recovery
Click to expand...
Click to collapse
Is disk encryption supported?
NetDwarf said:
Is disk encryption supported?
Click to expand...
Click to collapse
no, its been dead since A10, it causes infinite MI logo, and you cannot pull any form of log even with engineering build type.
rk134 said:
no, its been dead since A10, it causes infinite MI logo, and you cannot pull any form of log even with engineering build type.
Click to expand...
Click to collapse
It does work on CrDroid 7 (Android 11)
NetDwarf said:
It does work on CrDroid 7 (Android 11)
Click to expand...
Click to collapse
Can you send me a screenshot to prove encryption is working?
rk134 said:
Can you send me a screenshot to prove encryption is working?
Click to expand...
Click to collapse
This is in CrDroid 7.15 and I have to enter password at startup and in recovery (as one would expect with FDE).
Official site does not list crdroid 8 in download section:
Download here: https://sourceforge.net/projects/crdroid/files/vince/8.x/
knot2006 said:
Official site does not list crdroid 8 in download section:
View attachment 5587443
Download here: https://sourceforge.net/projects/crdroid/files/vince/8.x/
Click to expand...
Click to collapse
It's on crdroid.net down below at least. (It's separate from the "stable" entry)
Hi, this version is with Gaaps,
can you post version without Gaaps please ?
version 8.2 was more stable. This version reboots randomly.
attaching logs
Hi,
Does it pass cts without Magisk? Is it a user build (will banking apps work flawlessly)?
Fingerprint unlock is not working on my device (Redmi 5 Plus Vince) . Do I have to enable Something special? The Fingerprint Sensor itself is working in other Apps.
I am using crDroid Version 8.4 April 10 2022
I tried to create a log file with Andy log but it did not work.
I can't switch off 3 buttons vibration, there is no such option in vibration/haptic menu settings.
Bruh new version 8.4 for Vince device is unstable
It's crashing in every 30 min apps are not working properly please help
RyDeg4999 said:
Fingerprint unlock is not working on my device (Redmi 5 Plus Vince) . Do I have to enable Something special? The Fingerprint Sensor itself is working in other Apps.
I am using crDroid Version 8.4 April 10 2022
I tried to create a log file with Andy log but it did not work.
Click to expand...
Click to collapse
Bruh is your rom stable on 8.4 version mine is crashing every 30 min ಠ︵ಠ
Manish## said:
Bruh is your rom stable on 8.4 version mine is crashing every 30 min ಠ︵ಠ
Click to expand...
Click to collapse
I switch to a cutom asopExtended Rom where everything is Fine only Battery Life could be a lot better
RyDeg4999 said:
I switch to a cutom asopExtended Rom where everything is Fine only Battery Life could be a lot better
Click to expand...
Click to collapse
I think SparkOS has good battery life.
hursant said:
version 8.2 was more stable. This version reboots randomly.
attaching logs
Click to expand...
Click to collapse
I have the same issues with 8.4...
Installed it on my mothers phone. With no additional GAPPS flashed and only a handful of Apps from the Playstore installed, it is just not stable
Is it still supported or should I move to a different ROM?
rofi03 said:
I have the same issues with 8.4...
Installed it on my mothers phone. With no additional GAPPS flashed and only a handful of Apps from the Playstore installed, it is just not stable
Is it still supported or should I move to a different ROM?
Click to expand...
Click to collapse
moved to Project Elixir. It is more stable and rarely reboot.
What do you mean when you say, "wipe necesary partitions". what should i do "wipe" when installing your clean rom? Thanks, downloading it.