Which Ethernet Adapter works with Mi A1 - Xiaomi Mi A1 Questions & Answers

I want to use the phone with a lan cable. I have tried a ugreen usb-c rj-49 adapter but it didn't work (apparently it has otg).
Is there an underlying issue with A1 or should I try another adapter?

I'm using a tp-link ue330 adapter. Phone recognizes ethernet, and other connected usb devices. For this I need an type-a -type c otg adapter too.
edit: not sure about stock rom, but on los since beginning it was working for me.

Related

OTG not working without the original USB Type-C Adapter

It seams, that standard Type-C OTG cables and flashdrives are not recognized by oneplus two?!
When using the original Type-C Adapter with an micro-USB Stick or cable, it works.
Is this a bug in Oxygen 2.X or the kernel? Or is this Onplus´ marketing strategy, that Oneplus Two Users have to buy their adapter?
A lot of adapters are charge-only, so you need to make sure they can handle data as well
I've got this flash drive, and my OPT does not recognize it. The other one with the original OnePlus micro/C adapter just works fine.
Devices Available in Market are USB 3.0 / 3.1 but OPT support USB2.0, USB 3.0 / 3.1 devices or adapters will not work directly.
For example: The JetFlash 890S with Both USB Type-C and USB 3.1 Interface for OTG-Enabled Devices is backwards compatible with USB 2.0, but it isn´t recognized.
DirtyTodd said:
Devices Available in Market are USB 3.0 / 3.1 but OPT support USB2.0, USB 3.0 / 3.1 devices or adapters will not work directly.
Click to expand...
Click to collapse
same problem.. have a usb c/micro usb adapter, a otg with usb 2.0 and it doesn't work..
opt A2001
NetDaemon said:
For example: The JetFlash 890S with Both USB Type-C and USB 3.1 Interface for OTG-Enabled Devices is backwards compatible with USB 2.0, but it isn´t recognized.
Click to expand...
Click to collapse
I have Kingston 64GB mikroduo flashdrive, USB-C , USB-A compatible USB3.1, USB3.0, USB2.0. Don1t work, but work with Xiaomi USB-C to micro USB adapter and Sony micro USB OTG cable combo.
Yes, Oneplus 2's usb type-c port is defective (hardware level not OS or kernel) it only detects official oneplus adapter and not any standard adapter with 56k resistor( As oneplus's adapter has 10k resistor- Non-standard/Defective).
[email protected] said:
Yes, Oneplus 2's usb type-c port is defective (hardware level not OS or kernel) it only detects official oneplus adapter and not any standard adapter with 56k resistor( As oneplus's adapter has 10k resistor- Non-standard/Defective).
Click to expand...
Click to collapse
can you cite the source for this info?
Only original will work !!! Verified that !!!

OTG support

I bought a type-c adapter for my Z1 to use OTG cable and Usb key. The key does not power on. I tried the adapter to charge the phone with a regular usb cable and it works.
Is this problem related to COS or is OTG function not supported on the Z1? Or is there a way to enable it?
Glops4 said:
I bought a type-c adapter for my Z1 to use OTG cable and Usb key. The key does not power on. I tried the adapter to charge the phone with a regular usb cable and it works.
Is this problem related to COS or is OTG function not supported on the Z1? Or is there a way to enable it?
Click to expand...
Click to collapse
I don't know if that has changed but for cm you have to use an app like StickMount to be able to mout the USB stick.
Ok thanks, I guess I have to root then.
I used only es file Explorer and it worked for me. I testet Ext hdd, mous, keyboard and controller
Same, no root required, just an usb C OTG and a file explorer. Be aware that the OTG or the device could be uncompatible...
Glops4 said:
I bought a type-c adapter for my Z1 to use OTG cable and Usb key. The key does not power on. I tried the adapter to charge the phone with a regular usb cable and it works.
Is this problem related to COS or is OTG function not supported on the Z1? Or is there a way to enable it?
Click to expand...
Click to collapse
I bought a USB-C to USB-A Converter and it works for me. Official USB type-c adapter has no support for OTG.
hfutxqd said:
I bought a USB-C to USB-A Converter and it works for me. Official USB type-c adaipter has no support for OTG.
Click to expand...
Click to collapse
This might be the proper solution, it seems.
" type-c adapter for my Z1 to use OTG cable and Usb key"
What speed did you get to ?
Lenovo Zuk Z1
I tried Xiaomi USB typeC adapter with a SanDisk micro USB memory and it doesn't work
I have the same problem.At my oneplus 2 with adapter working normal but at Z1 not working.
No solution about that ? I got 2 adapters now (noname and Victsing) but still no otg, and usb storage options are unavailable !
Does it support in twrp recovery.. i mean does otg recognising in twrp...???
Strange, it should work out of the box on COS 12.1...just received my second Zuk1 and hooked up the Z1 to my car to read out the ECU, it worked without an hitch! Did not try a USB stick though...
I have 2 cables, one is with the micro USB for which I use a micro USB to type C USB adapter, the second USB OTG cable already has already the Type C connector and connects straight up.
I never used my "charging cable" as the idea is to plug your USB stick straight onto the OTG interface cable.
i have rooted/unlocked zuk z1.
tried every possible stuff (es file explorer,stick mount, usb troubleshooting etc), tried changing the otg cable, tried changing pendrives, nothing helps.
can anyone please help me?
xda is my only hope

Ethernet connection using a Dell usb-c to ethernet adapter

Hey guys,
just wondering if anyone knows whether you could setup an ethernet connection directly to your Oneplus 2 using an adapter like this?
Hi,
I've actually tried this for fun just 2 days ago with this adapter, I'm usually using it for my Dell XPS 15:
http://accessories.euro.dell.com/sna/productdetail.aspx?c=de&l=de&s=dhs&cs=dedhs1&sku=470-ABND
And no, it won't work nor detect the adapter at all.
My guess is that the adapter is connected using USB 3.0 internally, which is not supported by the OnePlus Two.
Do we figure it would work if it was USB 2.0 inside?
Not necessarily, because quite a few USB Type C to Micro-USB B 2.0 adapters won't work with the OnePlus Two either.
To my knowledge only the original (overpriced) adapter and a Xiaomi one are actually working, so either them or the other manufacturers are differing from the standard USB Type C 2.0 pinout.
If you want to save yourself some hassle I'd say you should go for an Ethernet to Micro-USB B one and add the Xiaomi adapter to it.
A kernel with proper Ethernet-support is also needed, LordBoefflas Kernels include a kernel-module for this, you can enable it inside the "Boeffla-Config v2" app.

ROM suggestions needed for OTG/Ethernet Y cable pairing

According to this thread = http://forum.xda-developers.com/showthread.php?t=2238840, I need to have either a custom Kernel or ROM in order to able to use my newly purchased Plugable USB 2.0 to 10/100/1000 Gigabit Ethernet LAN Network Adapter and Micro USB Host OTG Cable with Micro USB Power.
Unfortunately, I'm having a bit of difficulty finding any that support or include the drivers for my adapter. Does anyone know of any that support USB Ethernet adapters out of the box?

Does xperia x compact support OTG ?

I change my phone to xperia x compact recently, I find the type-c USB is easy to use.
I have a otg usb drive with micro usb, which is working on samsung s7, dell tablet. I wonder if it can be used on XC.
Thanks
Not sure about your micro USB OTG drive, but I purchased a separate OTG type-C adapter which connects to my USB card reader just fine.
I tried to use a type-c to micro USB adapter, it doesn't work. Maybe I have to buy a type-c otg adapt first.
jiangjun413 said:
I tried to use a type-c to micro USB adapter, it doesn't work. Maybe I have to buy a type-c otg adapt first.
Click to expand...
Click to collapse
Yes I previously tried an adapter which failed as well
itandy said:
Not sure about your micro USB OTG drive, but I purchased a separate OTG type-C adapter which connects to my USB card reader just fine.
Click to expand...
Click to collapse
May I know what brand is your adaptor? I tried a couple of OTG type-C microSD card readers, but none of them work.. it simply don't seem to be providing power to the adaptor.
I could use a mouse using:
mouse -> usb to micro usb otg from z1 compact -> micro to usb c adapter
trewelu said:
I could use a mouse using:
mouse -> usb to micro usb otg from z1 compact -> micro to usb c adapter
Click to expand...
Click to collapse
Even this doesn't work for me. My phone seems not being able to act as USB host and not recognising anything plugged in the type-c port. My phone is rooted, not sure if it's the cause.
I use the sony type-c dual flash drive and it works flawlessly
Still not working. I used a voltage reader and found that there is no voltage coming out of the USB port, no wonder it won't detect anything. No sure if my phone is faulty (doubt it, as the port works perfectly when it is USB client) or due to setting/rom/kernel...
Sent from my F5321 using XDA Free mobile app
dohanin said:
May I know what brand is your adaptor? I tried a couple of OTG type-C microSD card readers, but none of them work.. it simply don't seem to be providing power to the adaptor.
Click to expand...
Click to collapse
Do you have a pop up screen asking you what to do when you connect anything to the USB port?
BTW, my USB OTG adapter is of a brand REMAX.
no, nothing happens as if the phone does not know something is connected. but works ok when connected to another host (pc or power source)
i'm using rooted 7.1.1 stock rom
Sent from my F5321 using XDA Free mobile app
itandy said:
Do you have a pop up screen asking you what to do when you connect anything to the USB port?
BTW, my USB OTG adapter is of a brand REMAX.
Click to expand...
Click to collapse
Thanks! Finally i got it to work. Sorry that I had been trying type-c usb reader instead of a true type-c otg adaptor + reader... so, it fact it would work with a type-c otg adaptor.

Categories

Resources