my phone doesn't turn on and the message "Your device is corrupt. it will not be trusted and will not boot.".
I tried using "Rescue and Smart Assistant" he returned my phone to the ROM: "EVERT_PPWS29.116_16_24_subsidy_DEFAULT_regulatory_DEFAULT_CFC.xml".
What do I do? phone model is: XT1926-8 and OEM is blocked.
(Translated by Google)
FoxInfo said:
my phone doesn't turn on and the message "Your device is corrupt. it will not be trusted and will not boot.".
I tried using "Rescue and Smart Assistant" he returned my phone to the ROM: "EVERT_PPWS29.116_16_24_subsidy_DEFAULT_regulatory_DEFAULT_CFC.xml".
What do I do? phone model is: XT1926-8 and OEM is blocked.
(Translated by Google)
Click to expand...
Click to collapse
Flash magisk again.
FoxInfo said:
my phone doesn't turn on and the message "Your device is corrupt. it will not be trusted and will not boot.".
I tried using "Rescue and Smart Assistant" he returned my phone to the ROM: "EVERT_PPWS29.116_16_24_subsidy_DEFAULT_regulatory_DEFAULT_CFC.xml".
What do I do? phone model is: XT1926-8 and OEM is blocked.
(Translated by Google)
Click to expand...
Click to collapse
Flash stock until you can boot, try different versions, once you boot unlock bl to prevent it
Related
Hello I got this device (MS345) last week and today I was going to unlock bootloader, everything was going ok, i put the MS34510f_00 kdz and it got me an error (couldn't connect to server i think it was) but when I tried to reboot the phone it just gave me this lines that says "Secure booting error! Error Code: 1003" I can't get my phone booted normally or going to download mode or try recovery, when i try to do a factory reset I select the yes option but then it gives me the same security error, what can I do? please help me
It happened to me the same thing I had to use the warranty I did not find any solution
trixi3 said:
Hello I got this device (MS345) last week and today I was going to unlock bootloader, everything was going ok, i put the MS34510f_00 kdz and it got me an error (couldn't connect to server i think it was) but when I tried to reboot the phone it just gave me this lines that says "Secure booting error! Error Code: 1003" I can't get my phone booted normally or going to download mode or try recovery, when i try to do a factory reset I select the yes option but then it gives me the same security error, what can I do? please help me
Click to expand...
Click to collapse
When this occured with me i just reinstalled de stock rom with lg flash tool and this put me automatically into download mode when i connected my phone in pc
hello ,
i rooted my Phone and did a very stupid thing and in settings i turned of oem unlock and usb debugging off again. so now my Phone wont start cause of the message "custom binary(recovery) blocked by frp lock.
i tried something trough odin for the recovery but it failed so now the Phone wont turn off and when i try to go to recovery mode it says "an error has occurred while updating the device software .use the emergency recovery function in the smart switch pc software"
i tried that but the Phone is not compatible with smart switch and with samsung kies 3.
what can i do to unbrick my Phone , is it possible to fix my Phone after this?
regards, marco
been there
use samsung kies the normal edition ...not 3...that is compatible with our phone...emergency recovery and will work...sry 4 my english
streetfighter74 said:
hello ,
i rooted my Phone and did a very stupid thing and in settings i turned of oem unlock and usb debugging off again. so now my Phone wont start cause of the message "custom binary(recovery) blocked by frp lock.
i tried something trough odin for the recovery but it failed so now the Phone wont turn off and when i try to go to recovery mode it says "an error has occurred while updating the device software .use the emergency recovery function in the smart switch pc software"
i tried that but the Phone is not compatible with smart switch and with samsung kies 3.
what can i do to unbrick my Phone , is it possible to fix my Phone after this?
regards, marco
Click to expand...
Click to collapse
Its because you didnt explored smart switch properly ..
I have been there with my phone samsung galaxy j5 ... it happened just like yours ... i rooted my phone, forgot to check oem unlock and got the "custom binary blocked by frp lock" .. then i went to odin and flashed my firmware .. and it turns out .. the firmware i flashed is not the firmware of my phone .. so i got the message "an error occured while updating blah blah please go to smart switch blah blah blah " but i fixed it so theres solution for that ... smart switch
You said smart switch cant read your device?? Its because its bricked theres no way it can be read ..
So all you have to do:
1. Open smart switch
2. Go to "more"
3. Then go to "emergency software recovery and initialization"
5. Then go to "device initialization"
6.Put your model number and then your S/N or serial number .. it is found in the back of your edge plus.. it starts with letter R..
7.. after that .. you wait .. it will download the files for your phone...
That way you wont be flashing ramdom firmwares .. your phones firmware will be flashed since smart switch used the serial number.. i hope this helps..
Hi everyone, my G935F doesn't turn on at all and when I try to flash stock it's always "Custom Binary (RECOVERY) Blocked By FRP Lock".
Can't get into Recovery, when I try to reboot I get "Use the Emergency recovery function in the Smart Switch PC software" which doesn't work as well.
It seems that EVERYTHING is a Custom Binary and I can't flash anything at all. I was able to get to Recovery once and there was a red "dm-verity failed" line.
Is there anything I could try?
Watevah said:
Hi everyone, my G935F doesn't turn on at all and when I try to flash stock it's always "Custom Binary (RECOVERY) Blocked By FRP Lock".
Can't get into Recovery, when I try to reboot I get "Use the Emergency recovery function in the Smart Switch PC software" which doesn't work as well.
It seems that EVERYTHING is a Custom Binary and I can't flash anything at all. I was able to get to Recovery once and there was a red "dm-verity failed" line.
Is there anything I could try?
Click to expand...
Click to collapse
This has been discussed many many times.
Please read Rule #1
https://forum.xda-developers.com/announcement.php?a=81
"You stay classy San Diego"
Sent from my Echoe Driven G935F
Watevah said:
Hi everyone, my G935F doesn't turn on at all and when I try to flash stock it's always "Custom Binary (RECOVERY) Blocked By FRP Lock".
Can't get into Recovery, when I try to reboot I get "Use the Emergency recovery function in the Smart Switch PC software" which doesn't work as well.
It seems that EVERYTHING is a Custom Binary and I can't flash anything at all. I was able to get to Recovery once and there was a red "dm-verity failed" line.
Is there anything I could try?
Click to expand...
Click to collapse
smart switch will work but you need to use the emergency initialization feature.
open smart switch, click more, emergency initialization.
click the second tab and then enter your phone which is SM-G935F hit search
then enter your model serial number which was on sticker on he back of the phone or where ever you have put that sticker for safe keeping.
then it start.
it talks between 5 - 10 minutes before your phone reboots. unfortunately you will lose any data that is not backed up to the cloud or your gmail account.
Use Smart Switch. Put your device in Download Mode. in the smart switch use emergency feature. then wrote down your model number just like this SM-G935F.. Check the back of your mobile. it's written there. Then give serial number it's already there. Then follow the instructions. Downloading will start. And boom it will take minutes to hours depending on your connection. Don't use Odin method. It's useless.
Thanks everyone. I know this has been discussed but as I mentioned previously Smart Switch doesn't work. Emergency initialisation stays at 0%, I've waited for more than an hour, says the same thing - blocked by frp lock.
Watevah said:
Thanks everyone. I know this has been discussed but as I mentioned previously Smart Switch doesn't work. Emergency initialisation stays at 0%, I've waited for more than an hour, says the same thing - blocked by frp lock.
Click to expand...
Click to collapse
Try a full wipe in recovery then try emergency again in Smartswitch.
If this still​ fails you may need a repair by samsung service center
dezborders said:
Try a full wipe in recovery then try emergency again in Smartswitch.
If this still​ fails you may need a repair by samsung service center
Click to expand...
Click to collapse
Can't get to recovery, as I mentioned before.
KNOX is tripped by now, obviously, so I don't think Samsung will accept it.
Smart Switch tries to flash BTU so I've also tried downloading BTU and flashing HOME file via AP in Odin like the guy in the other thread suggested but it doesn't help - flashing is still blocked by FRP.
I'm starting to think I have a rather messed up phone on my hands right now.
Some progress here - was able to flash PIT file and flash up to system - now I get "Custom Binary (SYSTEM) Blocked By FRP Lock".
Watevah said:
Some progress here - was able to flash PIT file and flash up to system - now I get "Custom Binary (SYSTEM) Blocked By FRP Lock".
Click to expand...
Click to collapse
then the smart switch method should now work.
I have had that message a number of times and was able to restore with smart switch emergency feature.
Cosmic Blue said:
then the smart switch method should now work.
I have had that message a number of times and was able to restore with smart switch emergency feature.
Click to expand...
Click to collapse
It didn't, unfortunately. Have you had any problems with Smart Switch at all or it restored everything in the first run?
Watevah said:
It didn't, unfortunately. Have you had any problems with Smart Switch at all or it restored everything in the first run?
Click to expand...
Click to collapse
i have no problem with smart switch and started 1st time.
If you are using smart switch emergency feature it will not connect to smart switch, emergency feature is a stand alone app that does not need to connect smart switch to your phone.
Cosmic Blue said:
i have no problem with smart switch and started 1st time.
If you are using smart switch emergency feature it will not connect to smart switch, emergency feature is a stand alone app that does not need to connect smart switch to your phone.
Click to expand...
Click to collapse
It starts fine but I still get "Custom Binary (SYSTEM) Blocked By FRP Lock"
Watevah said:
It starts fine but I still get "Custom Binary (SYSTEM) Blocked By FRP Lock"
Click to expand...
Click to collapse
then you have a hardware issue with the memory chip it is not keeping the firmware after rebooting.
It sends you back into a boot loop which should not happen.
Don't connect your phone with Smartswitch. Just open Smartswitch go to the emergency mode. Select it. Enter your Model number which is on your back of phone. Then it will ask you about serial number. which is also on the back of your phone. Then follow instructions
Cosmic Blue said:
then you have a hardware issue with the memory chip it is not keeping the firmware after rebooting.
It sends you back into a boot loop which should not happen.
Click to expand...
Click to collapse
It's that, most likely. Nothing helps at this point.
SjDU said:
Don't connect your phone with Smartswitch. Just open Smartswitch go to the emergency mode. Select it. Enter your Model number which is on your back of phone. Then it will ask you about serial number. which is also on the back of your phone. Then follow instructions
Click to expand...
Click to collapse
I did exactly that, many times: "Custom Binary (SYSTEM) Blocked By FRP Lock"
Hey! I NEED HELP!
I was on Lineage OS 17.1 and wanted to try this ROM.
I entered to TWRP, format data, install Pixel Experience, restart and freeze on "Mi" logo for about 15 mins so I decided to try a cleaner mode.
Entered in Fastboot mode to flash a fastboot ROM with XiaomiFlash and selected last global ROM (davinci_eea_global_images_V10.3.15.0.PFJEUXM_2019 0921.0000.00_9.0_eea, always used this)
Flash and after some seconds an error like "connection error", I changed USB door on PC, refreshed devices list on PC and flash again, an error like "not corrisponding version"
and from now the phone is DEAD!
Don't turn on if I connect to PC, to charge, hold button for 1 minute, totally DEAD!! Have I hard bricked my phone?
Ok i entered in EDL mode but Mi flash tell me "Only nop and sig tag can be recevied before authentication"
riki075 said:
Hey! I NEED HELP!
I was on Lineage OS 17.1 and wanted to try this ROM.
I entered to TWRP, format data, install Pixel Experience, restart and freeze on "Mi" logo for about 15 mins so I decided to try a cleaner mode.
Entered in Fastboot mode to flash a fastboot ROM with XiaomiFlash and selected last global ROM (davinci_eea_global_images_V10.3.15.0.PFJEUXM_2019 0921.0000.00_9.0_eea, always used this)
Flash and after some seconds an error like "connection error", I changed USB door on PC, refreshed devices list on PC and flash again, an error like "not corrisponding version"
and from now the phone is DEAD!
Don't turn on if I connect to PC, to charge, hold button for 1 minute, totally DEAD!! Have I hard bricked my phone?
Ok i entered in EDL mode but Mi flash tell me "Only nop and sig tag can be recevied before authentication"
Click to expand...
Click to collapse
Sorry for you
I feel you must have flashed a fastboot chinese version instead of global.
Are you sure your model is a global MI9t and not a K20 reloaded global?
Now you have to go to service for Account certified in order to reset the phone.
Many offers are available on line.
Just a question:
Did you tick relock bootloader option in MIFLASH? (This can be the real mistake.)
lolo9393 said:
I feel you must have flashed a fastboot chinese version instead of global.
...
Did you tick relock bootloader option in MIFLASH? (This can be the real mistake.)
Click to expand...
Click to collapse
Normally the re-locking is the very last step in Miflash/flash_all_lock.bat (so only after everything got flashed) so it doesn't seem to be bricked because of this, plus it'd actually boot and display "this MIUI can't be installed on your device" message.
Looks like in this case the USB connection got interrupted during the flashing which depending on the partition that was being flashed can be disastrous.
Is your phone still being detected by your PC? Can you put it to fastboot even if the screen shows nothing?
I had a similar case (with another phone) of an interrupted flashing that lead to an apparently dead device, but it'd still be able to boot into fastboot, just display nothing.
Otherwise, EDL is your only solution, and you need an authorized account for it...
I installed ArrowOS on my phone. The problem is, when I was trying to lock the bootloader (I've heard that when it is open, you can't use bank apps) using the adb oem lock command, but my phone suddenly displayed "System has been destroyed" and bricked. I have unbricked it successfuly restoring the original MIUI. Now, i'm going to install ArrowOS again but, how do I lock the phone without getting the error again?
Sasori323 said:
I installed ArrowOS on my phone. The problem is, when I was trying to lock the bootloader (I've heard that when it is open, you can't use bank apps) using the adb oem lock command, but my phone suddenly displayed "System has been destroyed" and bricked. I have unbricked it successfuly restoring the original MIUI. Now, i'm going to install ArrowOS again but, how do I lock the phone without getting the error again?
Click to expand...
Click to collapse
You cannot relock bootloader without Miui stock rom.
So, I have to keep it open?
Sasori323 said:
So, I have to keep it open?
Click to expand...
Click to collapse
Yeap,if play store not certified or problem with banks apps,root and use Magisk hide.
Sasori323 said:
I installed ArrowOS on my phone. The problem is, when I was trying to lock the bootloader (I've heard that when it is open, you can't use bank apps) using the adb oem lock command, but my phone suddenly displayed "System has been destroyed" and bricked. I have unbricked it successfuly restoring the original MIUI. Now, i'm going to install ArrowOS again but, how do I lock the phone without getting the error again?
Click to expand...
Click to collapse
How did you unbrick it? My phone is in the same condition.
If you can enter in fastboot mode use :
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
NOSS8 said:
If you can enter in fastboot mode use :
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
Click to expand...
Click to collapse
Thanks, I fixed it