Related
Hi,
First sorry for my bad English.
I'm not a dev and i don't know hot to make flashable zip's and all other stuf, but i thing it's possible to make one thing to revert back to old bootloader.
First in new roms we have two new files, one is persdata.img.ext4 and i think here is some knox app files. Other is sbl1.mbn and that file i thing is for bootloader to show knox in download mode. In previous roms we dont have sbl1.mbn, we have only sbl2 and sbl3 files.
In Es File Explorer i see that sbl1.mbn is in /firmware-mdm/image folder
First i think to delete that file and after that to test flashing BMGA rom with odin to replace other two sbl files, but i don't know if i delete that file do i have a download mode.
And if its possible some dev to make one flashable file with some script to delete that file with instalation and replacing sbl2 file in /firmware-mdm/image and sbl3.mbn with that from BMGA rom (i don't know where is placed sbl3, i don't find them in root directory.)
Odin got fail after trying to replace aboot.mbn if found any way way to flash or repace aboot.mbn in phone i think we go back to previous bootloader.
mitky82 said:
Hi,
First sorry for my bad English.
I'm not a dev and i don't know hot to make flashable zip's and all other stuf, but i thing it's possible to make one thing to revert back to old bootloader.
First in new roms we have two new files, one is persdata.img.ext4 and i think here is some knox app files. Other is sbl1.mbn and that file i thing is for bootloader to show knox in download mode. In previous roms we dont have sbl1.mbn, we have only sbl2 and sbl3 files.
In Es File Explorer i see that sbl1.mbn is in /firmware-mdm/image folder
First i think to delete that file and after that to test flashing BMGA rom with odin to replace other two sbl files, but i don't know if i delete that file do i have a download mode.
And if its possible some dev to make one flashable file with some script to delete that file with instalation and replacing sbl2 file in /firmware-mdm/image and sbl3.mbn with that from BMGA rom (i don't know where is placed sbl3, i don't find them in root directory.)
Odin got fail after trying to replace aboot.mbn if found any way way to flash or repace aboot.mbn in phone i think we go back to previous bootloader.
Click to expand...
Click to collapse
Is not posible. I tried to do this ... But the thing is that the new bootloader is eFused with the soft. Anyhow i managed yo get MF8 on my baseband and MF8 as rom . but no luck to change the bootloader
Sent from my GT-I9505 using xda app-developers app
Hi,
Like, I'll send my phone to the SAV, because cracked glass, I don't want that they make the update, I'm with Android 4.2.2, I prefer to put a custom 4.3 or 4.4 with the old bootloader. I would like to put an official touchwizz 4.3 but without new bootloader, so they won't update it if they see that it is version 4.3 official.
Do you think that's possible? - It's possible, but does it work?
Or do you know how I could remove the new bootloader of the rom installing via ODIN? - Method below.
Is there an official 4.3 rom flashable via ODIN? - I made one but no tested!!!
Is there a risk to remove the bootloader of the rom? - I don't think but we are never sure of anything.
Because at worst, if they saw it, I could say that I did the normal update and it had to go wrong!
Here, a mate explain how make it!
explication of the Android structure:
sbl1.mbn - part of new bootloader , safe to delete
sbl2.mbn - part of new bootloader , safe to delete
sbl3.mbn - part of new bootloader , safe to delete
aboot.mbn - New Knox bootloader , DELETE
rpm.mbn - Resource power Management link
tz.mbn - Trusted zone ( Wifi won`t work if u don`t flash it together with new Modem )
boot.img - Kernel
recovery.img - Recovery/Download mode
system.img.ext4 - your apps/framework/android
NON-HLOS.bin - modem
cache.img.ext4 - CSC / APN settins / What bloat is to be installed depending on zone / carrier
hidden.img.ext4 - Another "system" part of apps that are too big for /system ( for now almost empty ) on S2 was full of apps
I've successful to make the modification with ubuntu, but I've a doubt, I wonder why he has not put the modem.bin file to inside. Reason in the post below.
Is someone can inform me if it is reliable or not?
I know why I believed he removed the file modem.bin, there isn't to modem.bin file on the S4 mini.
Edited: I misunderstood his answer!
so did you try it?
No, I don't know if I must do it, SAV sometimes make updates without thinking, so I do not think it's worth trying. But I think it should work, there is no reason!
Hey guys how do we add all csc codes to the phone?
I see some people (devs) add certain things from csc how can we do it ourselfs ?
Thanks
juDGEY2k10 said:
Hey guys how do we add all csc codes to the phone?
I see some people (devs) add certain things from csc how can we do it ourselfs ?
Thanks
Click to expand...
Click to collapse
There are single-CSC firmware and also multi-CSC firmware available. Instead of adding the CSC yourself, you can choose the appropriate firmware (that contains the CSC you want) to flash. I see there is no reason to add an CSC manually.
If you still want to add CSC, we will discuss further...
vndnguyen said:
There are single-CSC firmware and also multi-CSC firmware available. Instead of adding the CSC yourself, you can choose the appropriate firmware (that contains the CSC you want) to flash. I see there is no reason to add an CSC manually.
If you still want to add CSC, we will discuss further...
Click to expand...
Click to collapse
Hey dude, i was going to get a stock rom de bloat it (with a mod on here) and then add all csc mods to the stock rom.
thanks for getting back to me.
juDGEY2k10 said:
Hey dude, i was going to get a stock rom de bloat it (with a mod on here) and then add all csc mods to the stock rom.
thanks for getting back to me.
Click to expand...
Click to collapse
Did you add CSC to the stock ROM successfully? If so, can you share the instruction?
No mate thats what im looking for, i dont know how it would be done.
none of the devs want to help it seems.
If i find a way ill let u know m8
bump
bump
juDGEY2k10 said:
bump
Click to expand...
Click to collapse
Are you familiar with creating the TAR.MD5 file?
Sent from my SM-N9005 using Tapatalk
seen this mate might work for the s5
http://forum.xda-developers.com/showthread.php?t=2446269
juDGEY2k10 said:
seen this mate might work for the s5
http://forum.xda-developers.com/showthread.php?t=2446269
Click to expand...
Click to collapse
And also, are you familiar with creating the EXT4 partition image?
If so, I will tell you how to add the CSC to the stock firmware (I have NOT tried, but hope it works )
@vndnguyen
dont look to hard mate, i can read up on it. What do you want me to do?
juDGEY2k10 said:
@vndnguyen
dont look to hard mate, i can read up on it. What do you want me to do?
Click to expand...
Click to collapse
I asked this because I don't know how to create tar.md5 archive nor ext4 image file.
And as I have said, I have never tried that, but will try to do with you.
Give me some time, I will get back to this thread.
bump
CSC mods manually
juDGEY2k10 said:
Hey guys how do we add all csc codes to the phone?
I see some people (devs) add certain things from csc how can we do it ourselfs ?
Thanks
Click to expand...
Click to collapse
#1 Root your phone
for s5 I prefer towerroot as the knox counter is not flagged
#2 install SuperSU
Premade MODS
OPTIONAL install xposed installer for premade mods not all work depending
my phone G900W8 does not use feature.xml for CSC info like G900F
#3 Simplest way is to buy a decent file browser FX with root addon (I personnaly USE)
or use ES (Free) think it works
edit the CSC file by remounting the file system as writable and a file editor right on your phone. REBOOT for results!
*** recommend you backup the CSC files before modification,
@vndnguyen @learning1
I Saw in other forum how to flash on Rom with (signal-csc) other Roms with other csc (multi -csc) without ROOT!
no all ways this app will work with Signal-csc:
https://play.google.com/store/apps/details?id=com.manniakk.cscselector&feature
the error in odin was:
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> FAIL! (Ext4)
-My friend try this way in Section 2 (after it fail in the first time)
he extract the with 7zip the file" MODEM.BIN" from the rom with multi-csc and flash with odin in CP with the device in Download mode.
Tricks for Changing CSC Code While Flashing the Stock Firmware:
Sometimes when you just flashed the stock firmware it will not change the CSC code in jut one way around.
The below method might help to obtain the CSC file you want.
Make sure to recharge your phone before anything else.
Fully back-up all important data stored from your phone. You may use Kies 3 to back up and restore or through your Google and Samsung account.
1. Run and configure Odin. Do not check “Re-Partition” and “Auto Reboot” check boxes.
2. Load the stock firmware in the PDA button.
3. Set the phone in download mode (Volume Down+Home+Power button). Then connect the phone in your computer.
4. Hit the “Start” button and then wait.
5. Once the flashing successfully completed. Do not let it reboot into the normal mode.
6. Reboot into recovery mode (Volume Up+Home+Power button).
7. See if it’s applying the CSC file then wait until it finishes and reboot.
8. If you do not see the CSC installation, instead choose the “Wipe data/Factory reset”. Then repeat flashing the stock firmware. You may then achieved the CSC code flashing the stock firmware on the second attempt.
10. Confirm the CSC code by using Kies 3 and see if the CSC code has changed.
1.There is other way to flash other rom with multi-CSC from signal-CSC (mayby with PIT files?)
2.when we do flash PIT other then it corrupted or missed from your device?
3.there is a chance that there is a differences (in partition ) between ROMS form the same Module but other rigons?
Source:
"Tricks for Changing CSC Code While Flashing the Stock Firmware"
http://www.galaxys5update.com/change-csc-code-samsung-galaxy-s5/
Hi everyone.
I stuck while installing Dr.Ketan ROM on my N9000Q, which is descriebed on this web site. And I need a help about this issue.
First I updated my N9000Q to Android 5.0 Lolipop using Russia Rom ( I downloaded it from SamMobile) and now it seems like N900 in about section in phone.
After this update, I used it for a while, but now i want to insall a custom rom. But when i try to install CWM/TWRP or try to root it using Odin, I get the error message "NAND Write Start!! FAIL!!" I used different version of recovery files like "n900-cwm-recovery-6.0.4.4(1009)" , "n900-cwm-recovery-6.0.4.7-kk(0125)" , "n900-cwm-recovery-6.0.5.0-kk_L5.0(0812)" , "openrecovery-twrp-2.6.3.7-ha3g.img.tar" or root file "CF-Auto-Root-ha3g-ha3gxx-smn900.tar.md5". and also tried them with many different Odin version, like 1.85 up to 3.10.6.
Everytime I have tried, I got same error message. Did I something wrong, or what should I do?
Can anyone help me about this problem???
Edit 1: My Odin output.
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Edit 2: I just can install Android 5.0 Ukraine Rom. but not stil root or custom roms..
Last Edit: I can both root my device and also install Custom Rom.
Firstly I installed Android 4.4.2 Stock Rom for n9000q. After that, I ll regularly root and install cwm and Custom Rom. Thanks for all your helping.
kantimur said:
Hi everyone.
I stuck while installing Dr.Ketan ROM on my N9000Q, which is descriebed on this web site. And I need a help about this issue.
First I updated my N9000Q to Android 5.0 Lolipop using Russia Rom ( I downloaded it from SamMobile) and now it seems like N900 in about section in phone.
After this update, I used it for a while, but now i want to insall a custom rom. But when i try to install CWM/TWRP or try to root it using Odin, ...
Edit 2: I just can install Android 5.0 Ukraine Rom. but not stil root or custom roms..
Click to expand...
Click to collapse
I think that's an Exynos chip phone. Are you sure you are getting SW for that or are you trying to flash normal (Snapdragon) files?
Journyman16 said:
I think that's an Exynos chip phone. Are you sure you are getting SW for that or are you trying to flash normal (Snapdragon) files?
Click to expand...
Click to collapse
Yes it's true. It is an exynos chip Phone. I was trying to install Dr. Ketan Rom which is giden this thread. http://forum.xda-developers.com/showthread.php?t=2519897
I guess it suit with my phone. At least it is written that the rom is for exynos n900.
Does anyone have An idea? I cant still install custom rom or root my phone.
kantimur said:
Does anyone have An idea? I cant still install custom rom or root my phone.
Click to expand...
Click to collapse
It's normal that you are stuck if you don't know what device you are using. Do you own a N900 or N9000Q? Coz they are different phones. For root it ofc too:
1. CF-Auto Root for N900.
or
2. CF- Auto Root for N9000Q.
Joku1981 said:
It's normal that you are stuck if you don't know what device you are using. Do you own a N900 or N9000Q? Coz they are different phones. For root it ofc too:
1. CF-Auto Root for N900.
or
2. CF- Auto Root for N9000Q.
Click to expand...
Click to collapse
Thanks for your reply. I m trying your root files soon. but as i said in my #1 Message, I have a n9000q (Turkey version) but after i install Russia Stock Rom (and also Ukrain Stock Rom), It is written in version section in phone as "N900". That's why i try to install N900 root files. and also there is many threads that n900 and n9000q are same specification so that we can install both n900 root files.
Thanks again and again for your helping. But after your reply i have another question in my mind, that i can install Dr.Ketar Rom for n900 into my phone or not. I have doubt because i could already install n900 Ukrain and Russian Stock Roms.
Edit 1: I just tried to root with 2nd files too. but i cant root either and I got same error message.
kantimur said:
Thanks for your reply. I m trying your root files soon. but as i said in my #1 Message, I have a n9000q (Turkey version) but after i install Russia Stock Rom (and also Ukrain Stock Rom), It is written in version section in phone as "N900". That's why i try to install N900 root files. and also there is many threads that n900 and n9000q are same specification so that we can install both n900 root files.
Thanks again and again for your helping. But after your reply i have another question in my mind, that i can install Dr.Ketar Rom for n900 into my phone or not. I have doubt because i could already install n900 Ukrain and Russian Stock Roms.
Edit 1: I just tried to root with 2nd files too. but i cant root either and I got same error message.
Click to expand...
Click to collapse
That you can install custom roms doesn't mean that will work on your device. You receive NAND error in ODIN for that too.
*COUNCIL: I will flash the stock ROM and will root with this file via ODIN too if I was you and DONE!.
In the S8 firmware Samsung are now providing 5 files.
Here is how to install an S8 firmware
Phone preparation:
1. Download and install Odin on your PC
2. Download firmware below
3. Download and unzip your firmware (do not use WinRAR as it can give errors)
4. From your download put these files into Odin:
BL
AP
CP
CSC (not HOME_CSC)
5. Now look at the Odin Settings (for this select Options)
F.reset time
Auto reboot
6. Installing another country CSC or a network CSC will need the system partition size changing.
For this select Options and add this setting
Re-partition
7 Put phone into Download Mode and connect to PC .
When the Odin ID:COM box changes color press START
Download link: https://drive.google.com/open?id=1-I2ZyNfyN4JCdcRO_ugkrxJ_sh-088z8
I download the official firmware from Samsung directly using this software (samfirm _v0.3.6) and use the most recent ODIN-v3.13.1, newest firmware for my Sprint S8 is G950USQS2BQL1 from January which my phone updated to G950USQS2BRB1 which must not be in a full firmware yet, just an OTA update it seems.
I got 6 files in this downloaded file(SM-G950U_1_20171206185327_w3c9ywqj6i_fac.zip.enc4) which are:
AP_G950USQS2BQL1
BL_G950USQS2BQL1
CP_G950USQS2BQL1
CSC_OYN_G950UOYN2BQL1
HOME_CSC_OYN_G950UOYN2BQL1
USERDATA_SPR_G950USQS2BQL1
What I learned is (HOME_CSC) does not wipe your data, but the (CSC) will just like a factory reset, so with this in mind
If your just upgrading your stock firmware and want to keep your Data,
then just flash these 4 files....
BL (bootloader)
AP (System)
CP (Radio)
HOME_CSC (Region)
To Wipe your phone and bring it back to Stock like brand new out of the box first time powering it up.
Flash all the above but replace (HomeCSC) with (CSC) and add in the (USERDATA_SPR) file too..
ALWAYS ALWAYS ALWAYS backup your stuff first.. I use Smart Switch to backup all my Samsung devices.
Does it lock my phone to sprint
MindTrix said:
I download the official firmware from Samsung directly using this software (samfirm _v0.3.6) and use the most recent ODIN-v3.13.1, newest firmware for my Sprint S8 is G950USQS2BQL1 from January which my phone updated to G950USQS2BRB1 which must not be in a full firmware yet, just an OTA update it seems.
I got 6 files in this downloaded file(SM-G950U_1_20171206185327_w3c9ywqj6i_fac.zip.enc4) which are:
AP_G950USQS2BQL1
BL_G950USQS2BQL1
CP_G950USQS2BQL1
CSC_OYN_G950UOYN2BQL1
HOME_CSC_OYN_G950UOYN2BQL1
USERDATA_SPR_G950USQS2BQL1
What I learned is (HOME_CSC) does not wipe your data, but the (CSC) will just like a factory reset, so with this in mind
If your just upgrading your stock firmware and want to keep your Data,
then just flash these 4 files....
BL (bootloader)
AP (System)
CP (Radio)
HOME_CSC (Region)
To Wipe your phone and bring it back to Stock like brand new out of the box first time powering it up.
Flash all the above but replace (HomeCSC) with (CSC) and add in the (USERDATA_SPR) file too..
ALWAYS ALWAYS ALWAYS backup your stuff first.. I use Smart Switch to backup all my Samsung devices.
Click to expand...
Click to collapse
If I FLASH with CSC USERDATA_SPR does it mean my phone will be locked to the sprint network? because it currently works with all networks. I'm just not clear
hello Guys, i got a G955U that camed with the firmware G955USQS3CRE2 from sprint, I flashed a Combination file (build number G955USQU4CRE1) via ODIN, phone boots well, no problem at this point, but when I try to return to Stock I place the original firmware (build Number G955USQS3CRE2) and all the files correspondig to its slot at ODIN, when I start te flashing proces I get normal message of intilializing, after a few secconds the program says Failed.
Ive tryed diferent firmwares but they dont work, phone remains with the Combination Firmware. Im stuck at combination Firmware.
Im using Odin3_v3.13.1 version. Here is teh Log
HTML:
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1301)..
<ID:0/008> File analysis..
<ID:0/008> skip file list for home binary
<ID:0/008> apdp.mbn
<ID:0/008> msadp.mbn
<ID:0/008> persist.img.ext4
<ID:0/008> userdata.img.ext4
<ID:0/008> Home Binary Download
<ID:0/008> Total Binary size: 4744 M
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> NAND Write Start!!
<ID:0/008> SingleDownload.
<ID:0/008> abl.elf
<ID:0/008> FAIL! (Auth)
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any suggestion?
A will atatch a image of what is displaying the devices after it fails.
bullracing said:
hello Guys, i got a G955U that camed with the firmware G955USQS3CRE2 from sprint, I flashed a Combination file (build number G955USQU4CRE1) via ODIN, phone boots well, no problem at this point, but when I try to return to Stock I place the original firmware (build Number G955USQS3CRE2) and all the files correspondig to its slot at ODIN, when I start te flashing proces I get normal message of intilializing, after a few secconds the program freezes and the progress bar never camed up.
Ive tryed diferent firmwares but they dont work, Im stuck at combination Firmware.
Im using Odin3_v3.13.1 version. Here is teh Log
HTML:
Added!! Odin engine v(ID:3.1301).. File analysis.. skip file list for home binary apdp.mbn msadp.mbn persist.img.ext4 userdata.img.ext4 Home Binary Download Total Binary size: 4744 M SetupConnection.. Initialzation.. Get PIT for mapping.. Firmware update start.. NAND Write Start!! SingleDownload. abl.elf FAIL! (Auth) Complete(Write) operation failed. All threads completed. (succeed 0 / failed 1)
Any suggestion?
Click to expand...
Click to collapse
The 5th number from the end in firmware/combination files is the bootloader version aka BL, they must be equivalent and or higher than your current bootloader. So you cannot flash BL 3 firmware are you flashed BL4 combination file, you must resource BL4 firmware or above to and you will be good to go.
Sent from my SM-G955U using XDA-Developers Legacy app
Quickvic30 said:
5the number from the end is the bootloader version aka BL, they must be equivalent and or higher than your current bootloader. So you cannot flash BL 3 firmware are you flashed BL4 combination file, you must resource BL4 firmware or above to and you will be good to go.
Sent from my SM-G955U using XDA-Developers Legacy app
Click to expand...
Click to collapse
Thanks for your reply.
Sorry I dont get it at all, Im trying to understand. Let me see. The combination file I installed its BL4, so the stock firmware must be BL4 or above to allow the Firmware to be flashed on the device?
How can I know the BL#number# of the firmware?
---------- Post added at 10:14 PM ---------- Previous post was at 10:08 PM ----------
Quickvic30 said:
The 5th number from the end in firmware/combination files is the bootloader version aka BL, they must be equivalent and or higher than your current bootloader. So you cannot flash BL 3 firmware are you flashed BL4 combination file, you must resource BL4 firmware or above to and you will be good to go.
Sent from my SM-G955U using XDA-Developers Legacy app
Click to expand...
Click to collapse
Ohh I got it "The 5th number from the end in firmware/combination files"
Thanks! So I will get the right firmware. :highfive:
Ive just downloaded the G955USQU4CRE9 firmware, I deploy it on ODIN to my device, but im getting the same error. I see that this firmwares that have de BLL4 are not from Sprint, there is a alternative to dowgrade my device BLL#number# to go back to Stock Sprint? like install from TWRP the firmware, that will be secure?
bullracing said:
Ive just downloaded the G955USQU4CRE9 firmware, I deploy it on ODIN to my device, but im getting the same error. I see that this firmwares that have de BLL4 are not from Sprint, there is a alternative to dowgrade my device BLL#number# to go back to Stock Sprint? like install from TWRP the firmware, that will be secure?
Click to expand...
Click to collapse
Sounds like the partitions are different with the file you flashed and the stock sprint firmware. I sometimes tell Odin to re-partition to get back to stock along with the nand erase option checked as well. Just a thought... its how I get a screwed up flash back to stock, but you need a stock sprint firmware not a combo file. if you have twrp then your not stock at all and flashing a stock firmware will replace it back to original.
MindTrix said:
Sounds like the partitions are different with the file you flashed and the stock sprint firmware. I sometimes tell Odin to re-partition to get back to stock along with the nand erase option checked as well. Just a thought... its how I get a screwed up flash back to stock, but you need a stock sprint firmware not a combo file. if you have twrp then your not stock at all and flashing a stock firmware will replace it back to original.
Click to expand...
Click to collapse
Thanks for the Reply.
I sove it with the G955USQS5CRF5 file from Verizon, seems that it its compatible with the Spint firmware. I flashed with Odin, and make a FactoryReset at Recovery menu. That fixed it!
Good evening,
None of this worked. I followed the steps to a T. Put all files in and received this error? What am I doing wrong? I tried rooting my Sprint G955U and that failed. Didn't trip knox, which says 0x0 currently, but disabled fingerprint id, face recognition, samsung pay - says device has been rooted. In about section, specifies "official". Also, a new update just came out a few days ago in August, 2018. I tried to update and that failed as well. I put all these files in odin and it failed pretty quickly. Please help me restore my phone. Please see attached photos. Currently, running Android Oreo.
Serious help!
Alright so bare with me guys I’ve been an android user for a very long time (don’t kill me) but i recently moved to iOS yes I know ? lol point is I bought my girl a s8+ (well she did with my money lol) and of course being a female she got played and bought a locked device meaning frp and since I haven’t been in the Android scene in a Lil I did some diggin but came up with nothing really the phone is on G955USQS5CRF5 but I can’t find a combination for it so is she/we screwed?
kiddPREMIERE said:
Alright so bare with me guys I’ve been an android user for a very long time (don’t kill me) but i recently moved to iOS yes I know ? lol point is I bought my girl a s8+ (well she did with my money lol) and of course being a female she got played and bought a locked device meaning frp and since I haven’t been in the Android scene in a Lil I did some diggin but came up with nothing really the phone is on G955USQS5CRF5 but I can’t find a combination for it so is she/we screwed?
Click to expand...
Click to collapse
You're gonna wanna check out jrkruses thread which as an frp remove flashable zip through safe strap
https://forum.xda-developers.com/verizon-galaxy-s8+/development/rom-t3771206
bullracing said:
Thanks for the Reply.
I sove it with the G955USQS5CRF5 file from Verizon, seems that it its compatible with the Spint firmware. I flashed with Odin, and make a FactoryReset at Recovery menu. That fixed it!
Click to expand...
Click to collapse
Do you have the Combination file for G955USQS5CRF5? Can you provide a link to it?
CLKeenan said:
Do you have the Combination file for G955USQS5CRF5? Can you provide a link to it?
Click to expand...
Click to collapse
Sorry I didnt saw your reply, do you still Need it? I erased it from my computer but I can get it for you if you need it
i have just installed rooted frimwire in my galaxy s8 plus g955u and trying to get back in fectory frimwire i have searched on google but nothing found but today i have seen this post for get back in recovery am downloding file thank you so much for the post have a nice day :laugh:
---------- Post added at 12:19 PM ---------- Previous post was at 12:14 PM ----------
Dear ' sir i have s8plus sm-g55u snapdragon with locked bootloader and i have installed a rooted frimwire in my phone pda is also G955USQS2BQL1 is that possible to use this file is done to get back in stock frimwire ?