Database Users

Bootloader Unlocked

OK so I have an issue that I just cannot seem to fix. I've followed Max Lee's guide to unlocking the bootloader, obtaining root, and getting twrp. I've followed the written and video instructions to the t and a few guides in here, I have installed and updated the proper drivers and sdk tools, but my hitch is when I type the "fastboot oem Unlock" command, it says it finishes but my device doesn't reboot and ask if I want to proceed to unlock my bootloader, instead it just stays on the fastboot logo and does nothing until I restart it. This happens on both my mac and my pc so I'm not sure what the issue is I have usb debugging enabled and the allow oem Unlock slider is in the on position, any help or advice 8s greatly appreciated, thank you.
Sent from my ONE A2005 using Tapatalk

do you run an actual version of sdk-tools? fastboot recognized your phone, right? You can test it with following command: fastboot devices
Output is something like this:
33a0cde4 fastboot
Click to expand...
Click to collapse

nevermind i just fixed it, thanks

Wiley Fox Swift2+ Bootloader Unlock

It seems that unlocking the BootLoader on the WileyFox Swift2+ is even easier.
To unlock the boot loader (WARNING!!! This wipes your user data!!!)
Go To 'Settings - About Phone' Tap 'Build Number' seven times to enable 'Developer Options'.
Go To 'Developer Options' Enable 'Advanced Reboot', Enable 'OEM Unlocking'
...## not sure if these next few steps are even needed!!
Connect to computer running "Minimal ADB and Fastboot"
Open command window as administrator (To prevent Win10 messing around).
Enter command "fastboot oem unlock"
...##
Press the phone 'Power Off - Reboot - FastBoot'
PC detects device and states "Follow instructions on device screen"
Phone screen issues dire warnings about unlocking Bootloader.
Proceed and job done Bootloader is Unlocked (device at this point not rooted).
The stock Swift2+ Cyanogen Rom is no longer available - seek out the LineageOS rom instead

I unlocked my bootloader the other day and those are the same steps I did so I can confirm this works.
I then proceeded to root the phone with SuperSU 2.78. Worked a treat.

Swift 2 Plus and SuperSU
FelixPiers said:
I unlocked my bootloader the other day and those are the same steps I did so I can confirm this works.
I then proceeded to root the phone with SuperSU 2.78. Worked a treat.
Click to expand...
Click to collapse
Yes initially the only version of SuperSU I could find was v2.46, which kept failing.

Any help? My reboot menu doesn't have a fastboot option. Yes I have advanced reboot and oem unlocking enabled.
Edit: Sorted it. Turns out you have to reboot into the bootloader.

thejackle123 said:
Any help? My reboot menu doesn't have a fastboot option. Yes I have advanced reboot and oem unlocking enabled.
Edit: Sorted it. Turns out you have to reboot into the bootloader.
Click to expand...
Click to collapse
Is it too hard to google your question?
Works on most devices:
1) Turn off device
2) Hold VOLUME UP button
3) Connect device to PC via usb-cable

I installed SuperSU, before that I installed TWRP. Now I am unable to install the latest update "cm-marmite-a1478a0ee9-to-7aa1c797975e-signed"
When I download this update and perform the actual install, it gives an error. Restarting the phone via TWRP recovery gives the same error. I am getting "Error 7"
So no I want to revert back, to get rid off SuperSU and TWRP to install all updates and then later root the device with TWRP and SuperSU. How do I get the original state of the phone back?
Or do you have any advice how to get the latest update installed?
Thx.

SMessy said:
It seems that unlocking the BootLoader on the WileyFox Swift2+ is even easier.
To unlock the boot loader (WARNING!!! This wipes your user data!!!)
Go To 'Settings - About Phone' Tap 'Build Number' seven times to enable 'Developer Options'.
Go To 'Developer Options' Enable 'Advanced Reboot', Enable 'OEM Unlocking'
...## not sure if these next few steps are even needed!!
Connect to computer running "Minimal ADB and Fastboot"
Open command window as administrator (To prevent Win10 messing around).
Enter command "fastboot oem unlock"
...##
Press the phone 'Power Off - Reboot - FastBoot'
PC detects device and states "Follow instructions on device screen"
Phone screen issues dire warnings about unlocking Bootloader.
Proceed and job done Bootloader is Unlocked (device at this point not rooted).
The stock Swift2+ Cyanogen Rom is here
http://builds.cyngn.com/factory/marmite/cm-13.1.4-ZNH2KAS5RM-marmite-signed-fastboot-c64f8f5d87.zip
Click to expand...
Click to collapse
Hi, mate
unfortunately teh link to the stock rom is not working.
Can u provide me with another working link?
I deleted my rom and i can't find the stock to reanimate my phone.....
EDIT!!!!
All done, device is restored
THy @ll

Rom location
RayfG said:
Hi, mate
unfortunately teh link to the stock rom is not working.
Can u provide me with another working link?
I deleted my rom and i can't find the stock to reanimate my phone.....
EDIT!!!!
All done, device is restored
THy @ll
Click to expand...
Click to collapse
Just to confirm the stock room is still at this location as at 2nd march 2017
http://builds.cyngn.com/factory/marmite/cm-13.1.4-ZNH2KAS5RM-marmite-signed-fastboot-c64f8f5d87.zip

"Just to confirm the stock ROM is still at this location as at 2nd march 2017 :"
Link above does not work now, however below one does.
https://androidfilehost.com/?w=files&flid=126553

Hmmm. I'm going to try again. Before I got fastboot in red and Dvice Status: Locked. But I'll try again, see where I get.
Image of issue: https://ibb.co/jfLPye
edit: Updating to the latest Oreo update (8.1 I think)
---------- Post added at 08:34 AM ---------- Previous post was at 08:14 AM ----------
ohhhhhhh, I had to turn the phone off while connected, already running "adb & fastboot" (not just adb) then (phone connected in USB debugging mode) turn off the phone and hold volume up (no need to hole the power key as connected and I got the option to unlock with a warning that I may void the warranty. Then my phone encrypted/re-encrypted itself (I think it was already encrypted).
Now to flash TWRP (3.2 I think) and flash a custom ROM (Lineage 15.1 / 8.1 Oreo) Not sure if I should root or not. And if I do, should I root before installing 8.1?

got damit i never understand how to flash twrp i followed what google said.
fastboot flash recovery XXX.img it does its thing i reboot still no recovery im on stock cm12 ? i think or cm13 android 6.0)

Hi, trying to unlock my S2+ bootloader with Ubuntu MATE. Have completed all the steps listed, entered fastboot oem unlock into the terminal which now just sits there displaying < waiting for any device >
Any idea where I go from here?

bl91 said:
Hi, trying to unlock my S2+ bootloader with Ubuntu MATE. Have completed all the steps listed, entered fastboot oem unlock into the terminal which now just sits there displaying < waiting for any device >
Any idea where I go from here?
Click to expand...
Click to collapse
your device isn't picked up by fastboot ...first of all install the very latest version of adb ...using the usual Ubuntu story
sudo apt-get install adb
sudo apt-get upgrade
sudo apt-get update
sudo reboot
then switch on your device
go to /settings/about/buildnumber
click until developer settings are enabled
go to developer settings
toggle oem unlock to on
toggle adb to on
WITHOUT SWITCHING OFF
connect device to pc/laptop with original orange wileyfox cable
now your Ubuntu machine
must install drivers and Mount the phone so it should appear as a mounted volume on desktop
now open a terminal
now run the following :
sudo adb
sudo adb devices
now look on your phone and pull down the notification shadse ..make sure you have adb connected and file transfer mode ..if not change from charge to file transfer ...
there should be a pop up window on phone screen asking for permission for adb ..select allways allow and give pernission / authorization ..
now in terminal run adb devices and it should return some value as connected device
run:
adb reboot bootloader
phone will reboot to bootloader
run:
fastboot oem unlock
*use volume up to select yes
**beware will erase DATA ...
***if it doesn't work and adb and fastboot doesn't detect your device it is a driver problem but i haven't used Ubuntu in ages so can't remember steps to update your drivers other than updating the whole adb package
****some ubuntu instructions might be a little off as I've explained previously it's been a while
*****your waiting for device means
-adb service didn't start
+try "sudo adb"
-adb drivers out of date
+try sudo apt-get update
-adb on device not toggled to on
+toggle adb in dev settings
*adb authorization not given **should still see unauthorized device
-bad usb cable
+try another usb cable
-bad usb port
+try a different usb port
_____for clarity double check Ubuntu adb instructions and commands but this should put you on the right track____
---------- Post added at 08:30 AM ---------- Previous post was at 08:19 AM ----------
reggiexp said:
got damit i never understand how to flash twrp i followed what google said.
fastboot flash recovery XXX.img it does its thing i reboot still no recovery im on stock cm12 ? i think or cm13 android 6.0)
Click to expand...
Click to collapse
don't reboot immediately ..stock recovery will be flashed back over twrp
*i assume you know how to get to fastboot
adb reboot bootloader
fastboot oem unlock
*volume up for yes
fastboot flash recovery recovery.img
*make sure you have a copy of twrp called recovery.img in adb folder
when it says sending...
then is says writing ...
then it says done
DON'T REBOOT
UNPLUG USB
***MANUALLY BOOT TO BOOTLOADER USING VOLUME UP AND POWER
**** IN BOOTLOADER SELECT "RECOVERY"
you should then just wait on wileyfox first time it takes a minute or two don't know why then
it should boot to twrp
***you can take stock boot.img and patch it with magisk
-use: fastboot flash boot boot.img
-then you will have magisk and rooted
-using twrp apk or something like root rasher or flasher ..give apk root permission
-download twrp ..flash with apk from inside system ..after flashing select yes to reboot directly to recovery

Thanks very much, I've unlocked my bootloader now! Onto the TWRP, Magisk and LineageOS business now

bl91 said:
Thanks very much, I've unlocked my bootloader now! Onto the TWRP, Magisk and LineageOS business now
Click to expand...
Click to collapse
okay no problem
*i know everybody likes lineage and its usually more stable and the base for many custom roms
however just my 2cents worth ...i tried all the roms for our device ..but the by far the best for me was following the tutorial on how to make our device treble compatible ..
Then ...after 3-4 months of trying different treble GSI's i have stopped on Viper Official Pie 64bit A-only treble system.img ... at least give it a try after trying out lineageOs ..
you might thank me .

I can't get my device to show up usb debugging is on, Advanced Reboot', 'OEM Unlocking' etc. I've been trying for hours and hours. It shows up to transfer files if I want that mode so my PC is recognising it, but it doesn't seem to have drivers for adb. I've tried installing google usb drivers and also this: https://afterthoughtsoftware.com/posts/using-adb-with-wileyfox-swift
sorry if I haven't explained clearly, I'm just so sleepy from going around in circles. :|
I've rooted phones before and never had this issue. please can anybody help?
edit: have fixed I think! did two things at once so not sure which. I revoked usb devices so that my computer would have to ask permission again to connect (or something like this) and also clicked a thing on my PC to allow it to update what I think said driver icons automatically, which I wouldn't have thought would help, but it seemed to find the adb driver this time. I'd probably make more sense if it weren't 1am. :|

When i got my Swift 2 X, it came updated with 8.1 Oreo out of the box and the issue I had was unlocking the bootloader.
Sure fastboot oem unlock unlocked so I could flash recovery and roms but whenever I tried flashing a bootloader via fastboot, it gave me "FAILED (remote: Critical partition flashing is not allowed)". So that part was still locked.
This I fixed way back after searching around on my own about it but since the solution to this aint mentioned around here and I can't be the only one who have encountered this I think, I am just gonna add it in here.
There are now other commands to unlock your device, fastboot flashing unlock that does the exact same thing that fastboot oem unlock does and fastboot flashing unlock_critical is the command that unlocks the bootloader.
Both commands prompts you with the usual to confirm unlock and wipes your data.
It doesn't matter if you already unlocked the device with the oem command or flashing command, fastboot flashing unlock_critical should be able to unlock the bootloader either way.

My swift was also at 8.1 I had no problem unlocking the bootloader.
DH
RavZ75 said:
When i got my Swift 2 X, it came updated with 8.1 Oreo out of the box and the issue I had was unlocking the bootloader.
Sure fastboot oem unlock unlocked so I could flash recovery and roms but whenever I tried flashing a bootloader via fastboot, it gave me "FAILED (remote: Critical partition flashing is not allowed)". So that part was still locked.
This I fixed way back after searching around on my own about it but since the solution to this aint mentioned around here and I can't be the only one who have encountered this I think, I am just gonna add it in here.
There are now other commands to unlock your device, fastboot flashing unlock that does the exact same thing that fastboot oem unlock does and fastboot flashing unlock_critical is the command that unlocks the bootloader.
Both commands prompts you with the usual to confirm unlock and wipes your data.
It doesn't matter if you already unlocked the device with the oem command or flashing command, fastboot flashing unlock_critical should be able to unlock the bootloader either way.
Click to expand...
Click to collapse

bubba_66 said:
My swift was also at 8.1 I had no problem unlocking the bootloader.
DH
Click to expand...
Click to collapse
Doesn't seem that many who have this lock on their bootloaders, the only ones I could find here who had locked bootloaders the same way as I had are in the LineageOS 14.1 thread.
So at least I am not alone with that but sure makes me wonder how it is so for some while others not.

After unlock bootloader Everytime reboot always like this https://ibb.co/NSZR818

Moto G5 Plus not being detected under adb devices.

I had rooted my Moto G5 plus a couple of months back, I had to relock the bootloader and install the stock recovery and rom due to some reasons. I followed a thread on this website which had all the files and commands given to restore stock rom. Later, I decided to unlock the bootloader again. I followed the steps to unlock the bootloader but, my device isn't appearing under adb devices so, I am not able to do anything. I have installed all the moto adb drivers and checked oem unlocking and usb debugging under developer options but, my device doesn't appear under adb.
I used the following thread-
https://forum.xda-developers.com/g5-plus/development/stock-firmware-npn25-137-67-5-fastboot-t3694738

Everything in that guide is done in fastboot, so if you're in fastboot when you're trying to find your phone, try "fastboot devices" instead of "adb devices"

So, how do I follow the steps on moto's website to unlock the bootloader?

ReckerRex said:
So, how do I follow the steps on moto's website to unlock the bootloader?
Click to expand...
Click to collapse
For some reason,
Code:
adb devices
didn't work for me right away.
I skipped that command and just ran
Code:
fastboot oem get_unlock_data
and that worked and I was able to continue with the process. Perhaps try that and see what happens.
Drivers must be installed too. This thread helped me:
https://forum.xda-developers.com/g5-plus/how-to/unlock-bootloader-lenovo-motorola-moto-t3581133
Another thing that didn't work for me:
USB Dev settings must be disabled in order to mount USB File Transfer Mode (MTP). After updating to latest version, it seems that has been fixed so I don't have to do that anymore.

Bricked Verizon VS995 in Fastboot loop

Hi,
I’ve got an older Verizon LG V20 that’s been bricked. I hid it in a drawer for the past year or so, and stumbled across it again. If I can get this fixed, I’d love to update it and give it as a gift to an older friend who has a 6 yr old crap android phone. But first, some history…
-bought used in great shape and rooted with Dirty Santa to run on TMobile. I don't recall which ROM I used, but it was very stock minus the carrier apps. My wife had a chance to go to Italy, so we bought a 3rd party european SIM with 30 days of data and voice from Three UK. Short story is that the phone never recognized the SIM, but she used it to take some great pics during her stay.
-once back in the US, I decided to try a different ROM and I think I flashed the wrong files or something… it’s my fault but I honestly can’t recall if I loaded a Samsung image instead, or what exactly happened.
Currently, the phone boots ONLY into fastboot mode. ADB does not recognize the device, and I’m thinking that I’ve lost TWRP Recovery since I can’t enter Recovery Mode at all.
If I do hold Vol Down + Power, I get a Hard Reset menu, but nothing in there helps.
I tried using LGUP, but the device is "not recognized."
I’m at a loss as to what to do at this point. If there IS a way to un-brick this, I think it would make a great phone for a good friend.
If anyone has any suggestions, I’d love any ideas that you may have. I tried looking to see if any other threads cover this, but I’m not seeing anything with specifics or pointers to How-Tos. If I missed the relevant links, I’d appreciate being pointed to them.
Also…
-if I can return to Stock condition, I can then unlock the bootloader and flash a more current ROM again. Would I need to pick a new radio so it better matches TMobile vs the Verizon setup it originally came with?
thanks for reading!
motionmonk

Since you can get to fastboot why not flash a twrp to see if you will get recovery

0x0null said:
Since you can get to fastboot why not flash a twrp to see if you will get recovery
Click to expand...
Click to collapse
When I run fastboot in Terminal, I get a blank response-- that is, a simple carraige return with no info listed.
This is on a fresh Win10 install with the latest Platform Tools package (Justt adb & fastboot) from the Android Studio website.
Are there other drivers that I need? When I installed LGUP, I did install the LGMobileDriver_WHQL_Ver_4.1.1.exe installer as well.
-motionmonk

motionmonk said:
When I run fastboot in Terminal, I get a blank response-- that is, a simple carraige return with no info listed.
This is on a fresh Win10 install with the latest Platform Tools package (Justt adb & fastboot) from the Android Studio website.
Are there other drivers that I need? When I installed LGUP, I did install the LGMobileDriver_WHQL_Ver_4.1.1.exe installer as well.
-motionmonk
Click to expand...
Click to collapse
That is bad, can you try it ona windows 7 PC?

0x0null said:
That is bad, can you try it ona windows 7 PC?
Click to expand...
Click to collapse
I could... I need to find my Win7 install disks for an old laptop.
I'll report back by tomorrow.
I don't do this often... what makes WIndows 7 a better method than Win 10?
-motionmonk

motionmonk said:
I could... I need to find my Win7 install disks for an old laptop.
I'll report back by tomorrow.
I don't do this often... what makes WIndows 7 a better method than Win 10?
-motionmonk
Click to expand...
Click to collapse
issues with drivers

It took longer than I thought to find my Win7 installers... I'm in the middle of the reinstall now.
I plan to load the Android Platform Tools, LG Mobile Drivers, LGUP framework... is there anything else I should install?
thanks for any suggestions; I don't root often at all and am rusty at this
-motionmonk

Win 7 update
Ok, I've installed WIN7, Android Platform Tools (just ADB & Fastboot), LG drivers and LGUP.
Now when I do the fastboot command, I get a true response:
fastboot devices
VS995aa11a111 fastboot (where a=letters, 1=numbers)
YAY!
So at this point, if I load a TWRP.zip, would I be able to boot into Recovery, instead of fastboot mode?
I checked the official TWRP website, and the latest is TWRP 3.2.3-0.
EDIT: I looked in the LG Section, and it appears that there is not an official TWRP for the LG V20. Is that right?
Having gotten to the point where the laptop recognizes the phone, I really don't want to make a dumb mistake :silly:
thanks for getting me this far!
-motionmonk

motionmonk said:
Win 7 update
Ok, I've installed WIN7, Android Platform Tools (just ADB & Fastboot), LG drivers and LGUP.
Now when I do the fastboot command, I get a true response:
fastboot devices
VS995aa11a111 fastboot (where a=letters, 1=numbers)
YAY!
So at this point, if I load a TWRP.zip, would I be able to boot into Recovery, instead of fastboot mode?
I checked the official TWRP website, and the latest is TWRP 3.2.3-0.
EDIT: I looked in the LG Section, and it appears that there is not an official TWRP for the LG V20. Is that right?
Having gotten to the point where the laptop recognizes the phone, I really don't want to make a dumb mistake :silly:
thanks for getting me this far!
-motionmonk
Click to expand...
Click to collapse
There is no official twrp build for the V20, search for Phoenix's unofficial twrp thread
Sent from my LG-H910 using XDA Labs

cnjax said:
There is no official twrp build for the V20, search for Phoenix's unofficial twrp thread
Sent from my LG-H910 using XDA Labs
Click to expand...
Click to collapse
Thank you cnjax... I think I got it now:
recovery-twrp-vs995-2018-10-18

Now that I have the TWRP Installer, I connect the phone (in perma-fastboot mode), and verify that it is connected by using fastboot devices. I get a recognition string in reply. So now I move on...
-rename recovery-twrp-vs995-2018-10-18.img as TWRP.img
-move TWRP.img to my platform-tools folder
-issue flashing command fastboot flash recovery TWRP.img
Here's what I get:
Sending 'recovery' (25984 KB)
OKAY [ 0.889s]
Writing 'recovery'
FAILED (REMOTE: 'unknown command'}
Finished. Total time: 1.092s
I'm pretty sure I have the syntax correct, and the TWRP.img file is being recognized, but -something- isn't working.
Have I missed something here?
thanks for any suggestions,
motionmonk

fastboot help pages
motionmonk said:
Now that I have the TWRP Installer, I connect the phone (in perma-fastboot mode), and verify that it is connected by using fastboot devices. I get a recognition string in reply. So now I move on...
-rename recovery-twrp-vs995-2018-10-18.img as TWRP.img
-move TWRP.img to my platform-tools folder
-issue flashing command fastboot flash recovery TWRP.img
Here's what I get:
Sending 'recovery' (25984 KB)
OKAY [ 0.889s]
Writing 'recovery'
FAILED (REMOTE: 'unknown command'}
Finished. Total time: 1.092s
I'm pretty sure I have the syntax correct, and the TWRP.img file is being recognized, but -something- isn't working.
Have I missed something here?
thanks for any suggestions,
motionmonk
Click to expand...
Click to collapse
Hi
I'm just a noob but I am interested in the problem you are having and am following it to see what comes up with it.
There is a good fastboot thread here:
https://forum.xda-developers.com/showthread.php?t=2277112
On the first page you have options to wipe before flashing - i.e. system, boot, data, RECOVERY etc,
Maybe give those pages a read while waiting for someone more knowledgeable to fix your phone...
Since you are not sure what happened maybe the modem was affected which I think is bad...
I think doing a "fastboot getvar all" might give you a status of what you are dealing with .... since it gives you versions
of things...
Anyhow, good luck reviving the phone - "rooting" for you haha!
---------- Post added at 10:33 PM ---------- Previous post was at 10:05 PM ----------
This link might also be a good read
https://forum.xda-developers.com/v20/how-to/guide-lg-v20-to-life-t3827732

secondhand2 said:
There is a good fastboot thread here:
https://forum.xda-developers.com/showthread.php?t=2277112
. . .
I think doing a "fastboot getvar all" might give you a status of what you are dealing with .... since it gives you versions
of things...[/url]
Click to expand...
Click to collapse
secondhand2,
THX for the links! Those were very helpful!
No need to call yourself a noob... I think I outrank you in that department at this point!
I did try your suggestion of fastboot getvar all, and found something interesting...
when I did the command it returned (bootloader) unlocked:no
which I thought was WEIRD, since the phone -was- unlocked with a custom ROM before I messed things up.
I have attached a screenshot to this msg with the full info report.
So now I'm wondering if that's why my previous attempt at flashing TWRP failed?
Does this mean I have a soft-brick or a hard-bricked phone at this point?
I"m learning more through everyone's help and input, but I'm still lost as to where to go from here.

Hi,
I have a US996 and I unlocked it using the lg web site - they send a bin file that you can use to unlock the phone.
There are different exploits on different versions of V20 phones. THere are also versions of Nougat that have an anti rollback that stop you from going from a recent OTA update back to an older one that can be exploited to get root. For example, on the US996 I have., if I had bought it and it had been patched with 10p (not 100% sure which version was the cutoff point) even if the phone was unlocked, I might not be able to get root. So the versions of the ROMs/firmware are imnportant. As it happened I had the 10f version so rooting was possible - but I followed the threads on this site for my specific phone and stuck to STOCK rom's.
So I'm not sure about what ROM you have - i..e which version of the vs995 is rootable after you unlock the phone. And the unlocking method to use - I'm not familiar with dirty santa or lafsploit (might not have spelled that correctly). There is a tool called LGUP and a good thread on that below that I was reading but it is long read which is good for learning.
I can only point you to some threads - but unlocking is the next hurdle.
You might also want to use the latest TWRP and Magisk if you do get to root the phone. I used PHOENIX591's TWRP
- there is a good thread on that. https://forum.xda-developers.com/v2...-t3720239/post78529520?nocache=1#post78529520
Sorry I can't help you more with this - you do need to get the phone unlocked first. Some of these things are very device specific
I'm still keeping an interested eye on this...
Here is the other thread
https://forum.xda-developers.com/v20/how-to/guide-patch-lgup-to-unlock-features-t3652222
Good Luck!

secondhand2 said:
Hi,
I have a US996 and I unlocked it using the lg web site - they send a bin file that you can use to unlock the phone.
There are different exploits on different versions of V20 phones. THere are also versions of Nougat that have an anti rollback that stop you from going from a recent OTA update back to an older one that can be exploited to get root. For example, on the US996 I have., if I had bought it and it had been patched with 10p (not 100% sure which version was the cutoff point) even if the phone was unlocked, I might not be able to get root. So the versions of the ROMs/firmware are imnportant. As it happened I had the 10f version so rooting was possible - but I followed the threads on this site for my specific phone and stuck to STOCK rom's.
So I'm not sure about what ROM you have - i..e which version of the vs995 is rootable after you unlock the phone. And the unlocking method to use - I'm not familiar with dirty santa or lafsploit (might not have spelled that correctly). There is a tool called LGUP and a good thread on that below that I was reading but it is long read which is good for learning.
I can only point you to some threads - but unlocking is the next hurdle.
You might also want to use the latest TWRP and Magisk if you do get to root the phone. I used PHOENIX591's TWRP
- there is a good thread on that. https://forum.xda-developers.com/v2...-t3720239/post78529520?nocache=1#post78529520
Sorry I can't help you more with this - you do need to get the phone unlocked first. Some of these things are very device specific
I'm still keeping an interested eye on this...
Here is the other thread
https://forum.xda-developers.com/v20/how-to/guide-patch-lgup-to-unlock-features-t3652222
Good Luck!
Click to expand...
Click to collapse
You're incorrect arb hasn't been incremented on the 996
Sent from my LG-H910 using XDA Labs

Hi cnjax
The thread I used discussed arb but from what I remember it was never clear how to know which arb ( 0 or 1 ) a particular update was at. Are you saying there is never an increment for the us996?
Thank you for clarifying

secondhand2 said:
Hi cnjax
The thread I used discussed arb but from what I remember it was never clear how to know which arb ( 0 or 1 ) a particular update was at. Are you saying there is never an increment for the us996?
Thank you for clarifying
Click to expand...
Click to collapse
Was just pointing out that through the 996 oreo release lg hasn't incremented arb on the 996
Sent from my LG-H910 using XDA Labs

Hi cnjax
It is a bit difficult to read everything n get a clear picture sometimes. I'm hoping you would clarify something
If TWRP is not installed and the phone is unlocked but not rooted which method could be used to install oreo 20f?
Would you be forced to install 10f (nougat) to root and install twrp first before moving on to oreo?
In this scenario I assumed nougat was on the phone originally and it seems the phone is locked from the fastboot info given...but let's say it gets unlocked
Is there a method to install oreo first instead of starting with nougat and version 10f? If there is that would be awesome
Thank you!

secondhand2 said:
Hi cnjax
It is a bit difficult to read everything n get a clear picture sometimes. I'm hoping you would clarify something
If TWRP is not installed and the phone is unlocked but not rooted which method could be used to install oreo 20f?
Would you be forced to install 10f (nougat) to root and install twrp first before moving on to oreo?
In this scenario I assumed nougat was on the phone originally and it seems the phone is locked from the fastboot info given...but let's say it gets unlocked
Is there a method to install oreo first instead of starting with nougat and version 10f? If there is that would be awesome
Thank you!
Click to expand...
Click to collapse
If his bootloader is locked he'll need to downgrade, root and unlock the bootloader with dirty santa, flash updated twrp, flash a rom and magisk
Sent from my LG-H910 using XDA Labs

Post #71 about dumping contents/partitions with lgup seems a good idea -
Then I would try fastboot oem unlock to see what happens but not sure if that can break the bootloader or not. I think you would be in a deeper hole if it went south on you. I'm not sure if doing fastboot oem unlock can be risky at this point

My moto g5 plus is bricked and is stuck at fastboot mode

I have Moto g5 plus xt 1686 Indian variant.I hadn't unlocked my bootloader. The device was working but suddenly one day it got bricked dont know why but it boots only in fastboot mode that to with no information.The only error i am able to verify is "failed to validate boot image"
After trying for around 1 week i have tried these things
1. Used rsd lite earlier it wasnot able to identify my device in windows 10 machine but in windows 7 machine its able to do that but unable to flash the device
2. tried to flash using adb commands but they are also not working
Since i tried to unlock the bootloader through the guide of motorola website then also i am not able to do that and get this error "'fastboot' is not recognized as an internal or external command,
operable program or batch file."
Please help ....

Anubhav074 said:
I have Moto g5 plus xt 1686 Indian variant.I hadn't unlocked my bootloader. The device was working but suddenly one day it got bricked dont know why but it boots only in fastboot mode that to with no information.The only error i am able to verify is "failed to validate boot image"
After trying for around 1 week i have tried these things
1. Used rsd lite earlier it wasnot able to identify my device in windows 10 machine but in windows 7 machine its able to do that but unable to flash the device
2. tried to flash using adb commands but they are also not working
Since i tried to unlock the bootloader through the guide of motorola website then also i am not able to do that and get this error "'fastboot' is not recognized as an internal or external command,
operable program or batch file."
Please help ....
Click to expand...
Click to collapse
You need to install fastboot in pc and then flash the device to make it work.
You can prefer this thread
https://forum.xda-developers.com/g5...-flash-stock-romfactory-t3691396/post74221633

Anubhav074 said:
I have Moto g5 plus xt 1686 Indian variant.I hadn't unlocked my bootloader. The device was working but suddenly one day it got bricked dont know why but it boots only in fastboot mode that to with no information.The only error i am able to verify is "failed to validate boot image"
After trying for around 1 week i have tried these things
1. Used rsd lite earlier it wasnot able to identify my device in windows 10 machine but in windows 7 machine its able to do that but unable to flash the device
2. tried to flash using adb commands but they are also not working
Since i tried to unlock the bootloader through the guide of motorola website then also i am not able to do that and get this error "'fastboot' is not recognized as an internal or external command,
operable program or batch file."
Please help ....
Click to expand...
Click to collapse
You cannot unlock bootloader anymore. So try flashing normally. If your hardware is not damaged then you might me able to make it work.

debdeep98 said:
You cannot unlock bootloader anymore. So try flashing normally. If your hardware is not damaged then you might me able to make it work.
Click to expand...
Click to collapse
Since it is booting into fastboot mode i dont think its damaged.But the problem is its my first time for flashing so i dont know very much about it.
What i know is that , i installed adb in my system ,and then through command prompt i tried to detect my device But its not getting detected.So if you can please provide me a brief guide for flashing phone.

Anubhav074 said:
Since it is booting into fastboot mode i dont think its damaged.But the problem is its my first time for flashing so i dont know very much about it.
What i know is that , i installed adb in my system ,and then through command prompt i tried to detect my device But its not getting detected.So if you can please provide me a brief guide for flashing phone.
Click to expand...
Click to collapse
K.. install adb(https://www.androidfilehost.com/?fid=745425885120698566 ). If you had installed moto assistant then you'll have the drivers. If not then google motorola drivers and install them(http://www.motorola.com/getmdmwin ).
Once it's done. Open the folder where adb is installed.
Hold shift and right click>open command promt here.
At this point boot into the bootloader on your phone (fastboot mode).
On cmd type fastboot devices.
If your device is detected then it will show on screen.
If you get to this part.
Start flashing thru fastboot.
Get the files from google( or https://mirrors.lolinet.com/firmware/moto/potter/official/RETAIL)
Instructions to flash are in xda.
If you get failed to flash: security version downgrade then you're probably flashing an older firmware. Download the latest.
If you get failed to flash: preflash validation failed then there's not much you can do. Or atleast i don't know a solution to that.

its not detecting my device
Actually the problem is that it is not detecting my device when i give this command, although i have installed device drivers and adb also....This is is the problem

Anubhav074 said:
Actually the problem is that it is not detecting my device when i give this command, although i have installed device drivers and adb also....This is is the problem
Click to expand...
Click to collapse
Did you lenovo moto smart assistant to flash the device, you can try that as it will flash the device for you.

riyan65 said:
Did you lenovo moto smart assistant to flash the device, you can try that as it will flash the device for you.
Click to expand...
Click to collapse
yeah i tried that but when it is not verifying my phone when i select id (which is xt 1686) it says that phone can not be verified try again.i have tried every given id but it is refusing to accept my device.

Anubhav074 said:
Since it is booting into fastboot mode i dont think its damaged.But the problem is its my first time for flashing so i dont know very much about it.
What i know is that , i installed adb in my system ,and then through command prompt i tried to detect my device But its not getting detected.So if you can please provide me a brief guide for flashing phone.
Click to expand...
Click to collapse
Here's a guide to flash stock firmware.
Try the linked Mini ADB & Fastboot, if your device isn't recognised try to connect it to another usb port or use another usb cable.
Are you sure that you're in fastboot mode when you type the commands?
Read the guide carefully.
You need:
Latest signed stock firmware:
Europe (RETEU):
https://drive.google.com/file/d/13WuhoogtAdoincAyTwCLvRj0d-Z9kL0P/view?usp=sharing
India (RETIN):
https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
US (RETUS):
https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
flashallO.bat:
https://www.dropbox.com/s/zfh67uzfle9hsco/flashallO.bat?dl=0
Motorola drivers:
https://drive.google.com/file/d/0B0WGdtNWubBJYnlDcWRBZXltanc/view?usp=sharing
Mini ADB & Fastboot
https://drive.google.com/file/d/1lLYfimKN1U5CJ9cfpTCkhtMiuG8EfXBZ/view?usp=sharing
1) Download the 8.1.0_OPS28.85-17-6-2 Indian firmware (it's the last one for the Moto G5+ (potter).
2) Install Mini ADB & Fastboot (best place is the root directory of C:/ or how the partition/hard drive is named where your OS resists), not in program files or another folder.
3) Extract the firmware to that ADB & Fastboot folder.
4) Download my "flashallO.bat" and move it to that folder too.It removes the need for you to manually flash all partitions, just double-click it and it'll run all the commands for you.
5) Download and install Motorola device drivers.The program is called "Motorola Device Manager".
6) Reboot your phone to the bootloader. To do this, turn it off, then hold down the power and volume down buttons until you see a bugdroid undergoing open-heart surgery.
7) Connect the phone to your PC with your USB cable. Type
Code:
fastboot devices
to check if your device is connected. A serial number should be shown.
8) Run the flashallO.bat script. (Caution: This will wipe your device completely!) It will take some time to flash, just be patient and don't worry.
NOTE: If the command window appears for a brief moment then disappears, device drivers may not be installed. Ask again then.
9) Once the command window closes, it should have completed the flashing process and you are safe to press the power key on the phone to start Android. Just make sure that the text near the buttons reads "START".
Sent from my Moto G5 Plus using XDA Labs

Followed your guide this time my device is getting detected and when typed command adb devices its giving some number also but the image you provided is not flashing it.Dont know why please help

Anubhav074 said:
Followed your guide this time my device is getting detected and when typed command adb devices its giving some number also but the image you provided is not flashing it.Dont know why please help
Click to expand...
Click to collapse
You're always talking about ADB commands, it's Fastboot that you have to use, it's described above how you get there.
What image do you mean when you say it's not flashing?
The guide is complete, read it carefully.
You have to download a zip file, in your case the Indian (RETIN) variant:
XT1686_POTTER_RETIN_8.1.0_OPS28.85-17-6-2_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Unpack it to fastboot folder, use the flashallO.bat to flash the firmware.
Please clarify what image you're talking about and if you do the fastboot flash like described above please provide the recovery.log , you can do that in TWRP->advanced->copy log, if TWRP is installed.
Try to flash the firmware and immediately after that grab a log and attach it here.
Sent from my Moto G5 Plus using XDA Labs

Wolfcity said:
You're always talking about ADB commands, it's Fastboot that you have to use, it's described above how you get there.
What image do you mean when you say it's not flashing?
The guide is complete, read it carefully.
You have to download a zip file, in your case the Indian (RETIN) variant:
XT1686_POTTER_RETIN_8.1.0_OPS28.85-17-6-2_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Unpack it to fastboot folder, use the flashallO.bat to flash the firmware.
Please clarify what image you're talking about and if you do the fastboot flash like described above please provide the recovery.log, you can do that in TWRP->advanced->copy log, it will be stored in your internal storage.
Try to flash the firmware and immediately after that grab the log (with TWRP file manager) and attach it here.
Sent from my Moto G5 Plus using XDA Labs
Click to expand...
Click to collapse
Sry it's fastboot not adb .But the image i am trying to use is indian(retin) as you provided.And i followed all steps as they were given.
But i dont know how to get log files.
Also i would like to mention that this is my first time trying flashing a phone and as per my knowledge we have to install twrp recovery which i haven't done.its a normal phone with locked oem.
So please guide me how to get log files.

Anubhav074 said:
Sry it's fastboot not adb .But the image i am trying to use is indian(retin) as you provided.And i followed all steps as they were given.
But i dont know how to get log files.
Also i would like to mention that this is my first time trying flashing a phone and as per my knowledge we have to install twrp recovery which i haven't done.its a normal phone with locked oem.
So please guide me how to get log files.
Click to expand...
Click to collapse
You don't need logs. Your phone is locked so you cannot flash twrp. Only thing you can do is flash using fastboot commands. Just download the firmware.. extract. Put all of those files in the adb folder and run the flashall.bat or individual commands like fastboot flash recovery recovery.img which ever you feel is easier for you.

Anubhav074 said:
Sry it's fastboot not adb .But the image i am trying to use is indian(retin) as you provided.And i followed all steps as they were given.
But i dont know how to get log files.
Also i would like to mention that this is my first time trying flashing a phone and as per my knowledge we have to install twrp recovery which i haven't done.its a normal phone with locked oem.
So please guide me how to get log files.
Click to expand...
Click to collapse
debdeep98 said:
You don't need logs. Your phone is locked so you cannot flash twrp. Only thing you can do is flash using fastboot commands. Just download the firmware.. extract. Put all of those files in the adb folder and run the flashall.bat or individual commands like fastboot flash recovery recovery.img which ever you feel is easier for you.
Click to expand...
Click to collapse
That´s what I´ve said. If you would have TWRP you would be able to send a recovery.log but all you want to do is to flash a signed fastboot firmware. That´s possible without TWRP or unlocked bootloader, just by fastboot. Unzip the indian firmware
https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
into your Mini ADB & Fastboot folder, place the flashallO.bat there too and double-click it, everything in fastboot mode as described before.
What happens when you do that? Are the commands executed in the command window of your Windows PC?
Can you make a screenshot of it? The guide I posted has everything you need in it, you have to tell me what happens when you try to flash the unzipped firmware.
Just to be clear, the firmware and everything has to be on your PC, not your moble device!

i tried to take screen shot of it but was unable to do it but was successful in copying the complete commands log in text file so here it is
View attachment batch.txt

Anubhav074 said:
i tried to take screen shot of it but was unable to do it but was successful in copying the complete commands log in text file so here it is
Click to expand...
Click to collapse
Ok, that doesn't look to good.
The whole process is failing right at the start when the device is trying to build the partition table.
Have you tried different USB cables and ports?
Imo there are only two possible solutions:
Your device isn't working with fastboot correctly or its a hardware failure, the eMMC (the internal SD) may be corrupted. As your device is locked and hasn't been modded in any way this is the most plausible scenario also because it crashed out of the blue.
The only thing you can try yet is to use a different ADB and Fastboot tool, this one for example:
Minimal ADB & Fastboot:
https://drive.google.com/file/d/10NEzpxKpYWfq-HdK42ctwoEnCg-BfsRQ/view?usp=drivesdk
If all that changing of ports, cables and tools doesn't help you have to bring your device to a service center, they will most probably change the motherboard which isn't a cheap repair so if your device isn't under guarantee anymore you have to consider it it's worth the money.
Good luck!
Sent from my Moto G5 Plus using XDA Labs

So i tried with different fastboot software which you provided but i get the same errors .On phone when these commands run i get these messages failed to validate bootloader image and some thing called piv is also not able to be validated.
So i think its the end of my testing journey. Now can you please tell me how much chances are there for software issue. And is there any thing else i could.Any way i got to learn so many things through this but if is there anything left. Or should i go to service center

Anubhav074 said:
So i tried with different fastboot software which you provided but i get the same errors .On phone when these commands run i get these messages failed to validate bootloader image and some thing called piv is also not able to be validated.
So i think its the end of my testing journey. Now can you please tell me how much chances are there for software issue. And is there any thing else i could.Any way i got to learn so many things through this but if is there anything left. Or should i go to service center
Click to expand...
Click to collapse
I think you've done everything that's possible.
The device wasn't rooted,modded,unlocked or something.
It showed the failure out of the blue.
You tried different fastboot tools, cables, ports and the correct firmware.
I asked someone with more knowledge about your log and the whole case and he is thinking the same as I do.
So the chance for a software problem is really small. I told you everything I know, maybe a service center has more options for software checks but as far as I know they use the good old Lenovo Motorola Software Assistant.
So I would recommend to go there and ask (before they do anything) what you have to pay if your eMMC is broken. Here in Germany they always change the whole motherboard, the costs are about the half of the price you paid for the device here.
If your still under guarantee it's a different story.
I'm sorry, I told you everything I know and I flashed my Moto G5+ several times.
My opinion is that the device has a hardware failure and visiting the service center is the only thing you could do now.
I really would like to give you better news.
Sent from my Moto G5 Plus using XDA Labs

Hi, please help.
I have factory unlocked Moto G5 plus. I never did anyrhing to. All factory.
Recently its stuck in bootloop.
I really want to save all my pictures and texts.
Please help
Thanks

phone crazy said:
Hi, please help.
I have factory unlocked Moto G5 plus. I never did anyrhing to. All factory.
Recently its stuck in bootloop.
I really want to save all my pictures and texts.
Please help
Thanks
Click to expand...
Click to collapse
Read this thread. You can flash signed Motorola firmware like discribed. If you don't want to lose your data you can try to omit the "erase user data" command. Just delete it out of the flashallO.bat.
https://forum.xda-developers.com/g5...ked-stuck-fastboot-mode-t3996599/post80792213
Sent from my Moto G5 Plus using XDA Labs