Database Users

[GUIDE]XT1068 stock | root | backup partitions | system & apps mods

Only valid for Moto G 2014!
Hello, forum mates. I have spent few days with this great device, I gave it meanwhile to my sister as present.
ATM, there are barely any custom ROMs, so I will list here few good things to do right after unlocking its bootloader and obtaining root access :angel:
So here you can read my little checklist and do whatever you prefer:
DISCLAIMER:
Code:
[I]your warranty is now void. All you do
with your phone is on your own risk!
Partitions info is valid for XT1068
international GSM dual-SIM only! Workflow
is tested only on KitKat factory image![/I]
Click to expand...
Click to collapse
Unlocking Bootloader: Motorola's website
Removing startup screen with warning of unlocked bootloader: flash attached zip in custom recovery
(I can confirm that the attached zip works, it will restore the white original Motorola splash screen)
1. Boot custom recovery without flashing it:
Copy and paste custom recovery (file format: img) into your SDK/platform-tools folder, I recommend here TWRP_2.8.0.1_Titan_v2 that I have successfully tested myself. Until this point the latest Motorola USB driver must be installed on your Windows PC, USB debugging (under "developer options") on your phone must be enabled. However, I generally recommend using Linux instead of Windows. You can check in my short guide for Ubuntu users how to install fastboot and ADB in Ubuntu. I have no clue about Mac iOS, sorry.
Here we go:
Navigate in CMD line into the directory where your adb.exe is saved. Example on my PC, it is in the folder "AndroidSDK", and there in the folder "platform-tools". So my commands would be:
Typing on keyboard Win+R
Enter cmd
the command line appears after that
Code:
cd c:\androidsdk\sdk\platform-tools
Now I'm in my desired folder. The next command is checking the USB driver / ADB connection:
Connect the phone to with your PC via USB cable and enter in cmd:
Code:
adb devices
Correct response:
HTML:
xxx(serial No)xxx device
If you don't see serial No of your Moto G, check if USB debugging is enabled. If serial No is there but "offline" instead of "device" appears, you will only have to confirm the promt on your phone's screen to allow USB debugging. If nothing appears, try to update your USB driver (don't go any further without working ADB connection!)
Now we will boot into bootloader mode and check there if fastboot connection is also working:
Code:
fastboot devices
Correct response:
HTML:
xxx(serial No)xxx fastboot
If the response looks like that, we can now boot into the custom recovery without flashing it onto device. The recovery.img will be booted directly from "platform-tools" folder, while stock recovery still remains installed on the phone. My recovery.img file's name is for example "TWRP-Titan", so after I've previously saved it in my "platform-tools" I will now enter in cmd:
Code:
fastboot boot TWRP-Titan.img
The phone will boot into the beautiful touch-recovery TWRP. Blue screen is there? Yesssss!! :good:
Now we can start with backups of our still 100% stock firmware in the next chapture.
Click to expand...
Click to collapse
2. Backup your stock firmware:
While still in the TWRP, simply create backup of all your partitions. It is strongly recommended to save backup on the external SD card, as many modifications or next unlocking of the bootloader (if relocked) will every time blow all your data from the internal memory.
Now still in TWRP, install SuperSU.zip
Reboot into the system
Now we will backup stock recovery, that we can later flash at any point back:
Code:
adb shell (enter)
su (enter)
Look at this point on the screen of your phone, SuperSU will promt you to allow SU access for shell, You should confirm that.
Code:
dd if=/dev/block/mmcblk0p32 of=/sdcard/recovery.img
It will save the "recovery.img" file in your /sdcard folder on your phone's internal memory. It is strongly recommended to create the new folder on your external SD card where you can move all backup img files. To move the files, use any root file browser like for example Root Browser. When you open Root Browser for the first time, it will prompt oyu to install few utilities (busybox, unrar etc) which you should allow.
At this point, your entire stock firmware has been saved as backup.
Click to expand...
Click to collapse
3. Backup all partitions of your factory image / firmware:
Just the same way as you have previously created backup of your "recovery.img" you can
create "img" backup files of all your partitions. Check the attached screenshots and simply replace in the adb shell command the number of the mmcblk0p block No with the one you desire to backup and change "recovery" to the proper partition names, just like in the screenshots:
Click to expand...
Click to collapse
4. Restore to 100% stock firmware:
To return to 100% stock, you simply need to flash (or only boot) again TWRP 2.8.0.1, to restore your nandroid backup of your stock firmware and -if custom recovery was flashed- to flash in bootloader mode your stock recovery back. Paste your (stock) "recovery.img" file into "platform-tools" folder and execute in bootloader mode:
Code:
fastboot flash recovery recovery.img
After that simply restore your TWRP backup of stock and flash in bootloader mode your stock recovery back. To unroot permanently, open SuperSU app and choose the option "Full unroot" under "settings".
To relock the bootloader again: reboot to bootloader mode and execute in cmd:
Code:
fastboot oem lock
Your Moto G should be now again 100% stock.
Click to expand...
Click to collapse
If you benefit from this guide, show me your love and please hit "THANKS" button.
Credits also to all guys who have created linked guides (please hit there "thanks" also)

EASY MODS (Moto G 2014 stock firmware)
I am myself very big fan of SlimRoms (I was AlphaBeta SlimKat tester on few devices), so I was desperately missing the "Real Dark Slim" mode (and several other mods) on the Moto G 2014 factory image 4.4.4
I had to darken my Moto G 2014, so here I share now quite easy way how to get dark UI on many apps:
Click to expand...
Click to collapse
DARK UI APPS:
On the attached screenshots is an example of the "normal" Play Store (light UI) YouTube app vs the modified, dark UI YouTube app.
Luckily, the Team BlackOut consisting out of some great developers and contributors has darkened out whole bunch of apps. Please visit their website or please visit their thread where you can get more info and download directly the app TBO updater (ver.5.0.0 is up to date ATM, it is a lot better than the v.3 which was suffering of regular FCs on many devices).
With the TBO app you will find also boot animations, wallpapers etc and info how to install, the most important to avoid data loss and crying is: don't forget to create nandroid backup before modifying!
List of modified apps by the TBO available in dark UI (choice, uncomplete list):
Apollo music
Calendar
Chromecast
Drive
DropBox
Ebay
ES File Explorer
Facebook
Google now
Google+
Gmail
Hangouts
Instagram
Keep
MMS (AOSP)
Netflix
PayPal
PlayStore
WhatsApp
Skype
Spotify
Translate
Twitter
YouTube
etc.
Small tipps for the flawless un/installation of the system apps:
Regarding the fact that issues could occur when replacing the system apps (probably caused by smaller scripts which might remain as "corpses" after removing the apps) here is quite reliable way to go:
gain root access (flash SuperSU zip in custom recovery)
backup all apps that should be replaced with the darkened ones (recommended: Titanium Backup to create backup, or SD Maid to create *apk file)
now uninstall the respective apps (also with TB or SD Maid)
Open Play Store, install again and uninstall respective apps (that will remove reliably all rests)
Install the darkened apps (apk files or flashable zips that you have downloaded with TBO Updater)
Enjoy dark apps!
TROUBLESHOOTING: If anything goes wrong (bootloop, dark app FCs etc) delete darkened app and restore your app backup. I have never faced bootloop, but some apps simply might not work and will FC. Even if somebody would face bootloop, restoring the nandroid backup will revert all changes.
For normally installed apps (non-system apps): simply uninstall them through Play Store and install darkened ones instead. If TBO apps don't work, uninstall them and install again from the Play Store normal versions.
Click to expand...
Click to collapse
All credits here go to @djdarkknight96, @B_Boytm, @Gunthermic, @dafoxs, @train, @darkknight and our beloved SlimGapps maintainer, @dankoman :highfive:
Sorry, if I forgot to mention someone- remind me please!
(please if you use their modified apps, don't forget to find some posts of those guys here on forum and hit several times "thanks" button!)
Xposed frameworks
Add hunderds of mods, change functions of your hardware buttons, add double-tap-to-sleep, make your phone to fly etc, endless mods possibilities with Xposed frameworks (main thread)
Little guide for people who never used Xposed frameworks before:
download Xposed installer apk (v. 2.7 experimental is my recommendation for 4.3 and newer firmwares)
download also Xposed-Disabler-Recovery.zip from the main thread (if anything goes wrong)
create nandroid backup!
install Xposed installer app
open the app and Install/Update framework
reboot
if anything goes wrong, you end up with bootloop or so, reboot recovery and flash Xposed-Disabler-Recovery.zip (if even that doesn't help, restore nandroid backup)
if the phone reboots fine (it should) download modules you desire to use and install them
reboot
enjoy your new, customized firmware
If you find this post useful, please hit "THANKS" and honour my time spent to share this with you. Please also hit thanks to all devs and contributors whose work brought you benefits.
Click to expand...
Click to collapse

Hope to see soon more tweaks from you

Gerriitw said:
Hope to see soon more tweaks from you
Click to expand...
Click to collapse
I will post in the second post few more ideas with smaller mods on the stock firmware like using dark UI apps, some useful little frameworks modules, debloating etc.
This thread is actually not so interesting for experienced users, it's all quite common stuff.
tetakpatalked from Nexus 7 flo

Very helpful for newbies....U have done great job...hope to see more...

Second post updated (mods of stock 4.4.4 firmware)

YD206>YD201[HOW TO] Install latest RU.134+Root+Xposed+Free space in system partition

YD206>YD201[HOW TO] Install latest RU.134+Root+Xposed+Free space in system partition
Note1: All commands are sent from "C:\Program Files (x86)\yotaphone_flasher"
Note2: Sometimes it looks like phone is stucked in boot animation. Please wait, cool your phone and wait. It Happened me a lot of times when I tuned this guide. But in this last it worked well. There was no need to restart phone.
1. install adb-setup-1.4.3.exe
2. install yotaphone2_flasher.exe
3. unzip 5.0.0-RU1.1.124.zip to "C:\Program Files (x86)\yotaphone_flasher\firmware"
4. unzip 4.4.3-S01-003-CN1.0.3.32a.zip to temporary folder
5. copy files from CN radio folder to "C:\Program Files (x86)\yotaphone_flasher\firmware\radio"
6. copy twrp_yotaphone2.img to "C:\Program Files (x86)\yotaphone_flasher\firmware"
7. enable USB debugging from developer options on your YotaPhone 2.
8. connect it to PC with a USB cable, if it asks for debugging authorization, permit it.
9. turn off. Then start phone in bootloader (Power+down)
10. unlock boot loader with: fastboot oem unlock
11. flash prepared firmware by running yotaphone_flasher.exe and select 1. later confirm replace user data. Please check if all images are sent successfully. Otherwise restart your PC or increase RAM.
12. start phone, add your google account (for able to update build-in applications)
13. Upload via USB to folder Download:
UPDATE-SuperSU-v2.46.zip
xposed-v87-sdk21-arm.zip
XposedInstaller_3.1.1.apk
14. Update to 1.134 via OTA
15. Wait until all applications are updated
16. Turn off phone. Boot to bootloader (power+down)
17. Flash TWRP: fastboot flash recovery twrp_yotaphone2.img
18. Turn off phone. Boot to Recovery (power+up, hold longer 5-7 seconds)
19. in TWRP: Mount>System>Back
20. Do backup of system+data+boot (for sure), byt Backup>Select>Swipe
21. There is too low space in system (<10MB). We need to remove application which will be updated anyway to latest version from GooglePlay. Will have >300MB
22. Click: Advanced>File manager
23. go to /system/app
24. Find Books click on it. Now you see apk file for built-in "Google Play Books application"
25. Click bottom (Google Play Books) icon, then delete, then swipe, then back.
26. Continue with these folders:
/Books
/CalendarGoogle (Calendar)
/Chrome (Chrome)
/CloudPrint (Cloud Print)
/Drive (Drive)
/Galaxy4 (some animated wallpaper)
/Hangouts (Hangouts)
/HoloSpiralWallpaper (...)
/Keep Keep
/Lingvo-release (ABBYY Lingvo)
/Maps (Maps)
/Music2 (Google Play Music)
/Newsstand (Google Play Newsstand)
/OfficeSuite_Free (OfficeSuite)
/Videos (Google Play Movies & TV)
/YouTube (Youtube)
27. Go to main menu inTWRP, click Install
28. Find your prepared files and install it. (UPDATE-SuperSU-v2.46.zip, xposed-v87-sdk21-arm.zip)
29. Reboot to System
30. Install XposedInstaller_3.1.1.apk
31. Update Super SU in Play store
32. Run super SU, it will try to update Super SU binary by script in TWRP
33. Later find Xposed application, download your programs and use
Questions to you guys, because now I can't test it. Is it needed to start flashing with 4.4.3EU, because i saw it in one thread.
And please, if I forgot anything, let me know.

It takes long time after step 11, right? I'm still waiting...

gdw1986 said:
It takes long time after step 11, right? I'm still waiting...
Click to expand...
Click to collapse
After unlocking bootloader, the first boot takes a while, 30min more or less. Anyway, I suggest you to follow this guide which is kept updated: https://forum.xda-developers.com/yotaphone-one/help/guide-everything-to-yotaphone2-t3547194

TheArt. said:
After unlocking bootloader, the first boot takes a while, 30min more or less. Anyway, I suggest you to follow this guide which is kept updated: https://forum.xda-developers.com/yotaphone-one/help/guide-everything-to-yotaphone2-t3547194
Click to expand...
Click to collapse
Thanks a lot.:good:

Excellent manual!
I have small comment:
Step 2 - It's better change Original yotaphone flasher on YotaFlasherReworked.zip - it's from that theme.

*UPDATED**UNLOCK TOOL (4-2019) for ALL Versions of BLU R1-HD

BLU R1-HD bootloader unlock script tool, and TWRP install tool.
Download is a zip file, unpack it to somewhere you will remember. Run the dirty-cow-tool.bat // mtk-su-tool.bat
The included files and folders are set to hidden, in effort to keep them safe from accidental delete.
Must have adb+fastboot + drivers installed and setup prior to using tool
Easiest method to install adb + fastboot on windows is with "15 second adb + fastboot install TOOL"
LINK==>ADB+FASTBOOT
It is for windows
In linux :
"sudo apt-get install android-tools-adb"
"sudo apt-get install android-tools-fastboot" Some fastboot commands were missing when i used this one ie "fastboot flashing get_unlock_ability"
"sudo apt-get install fastboot" worked better when I tried. ( i used that command as a check before doing the unlock, so it was needed only for that check)
Using Tool
On Windows?
Unzip the downloaded file to a new folder, open new
folder and click on "dirty-cow-tool.bat". // "mtk-su-tool.bat"
Do the steps in order (1-2-3-4) to be unlocked, then
Step (5) to get to second page where step (1) is root
The rest is optional
On Linux?
Unzip downloaded file to new folder folder .
Open folder. Then open R1-Linux-tool-v2 folder
Open terminal from that folder and type
" . R1-HD-TOOL.sh "
Same order of steps (1,2,3,4) step (5) for extra
Steps (1 on second menu) for superSU root.
Second menu steps (2,3,4,5,6,7,8) are optional.
**Linux Note**
The tool uses "fastboot flashing get_unlock_ability" as one of the methods to check before doing the unlock.
The version of fastboot that installed with "apt-get install android-tools-fastboot" did not recognize
this command. But "apt-get install fastboot" updated some version and then the command was recognized.
******OTHER NOTES****
--- this has been mentioned in the general thread and the modified v17 thread, but It has come up again so I wanted to make note of it.----
--- The newest blu versions (V7.4.2 and V17) Have made changes to "toolbox" and this effects things like "adaway" and "titanium backup"
--- The suggested fix is to install busy-box. I have had success with the version from play store, some prefer to use f-droid version. Either one will do. Install it and open the app. From in the app you need to do an install.
CHANGE LOG
V1:. Initial release : removed
V2:. : fixed typos preventing proper function
V3:.: switch file verification to md5 check instead of "ls-l" comparison.
V4: current version: add extras page, add SU flash, de-bloat script, Added Fm Radio, Added pre-loader roll back
V5: Fixed wrong loop "goto" line that made preloader rollback do "MTK_BLU Debloat v2" instead
V6: Added manual pause to script for mods that need recovery (Extra's 5) . Added redundent recovery flash command .
Few reports of recovery "not Sticking" and needed to run the flash commands manually one by one. Maybe the redundent
flash will make it survive. If still having problem with recovery "staying install" try manually flashing
here is link to the steps needed. FLASH RECOVERY
V7 Improved logs Added line to make batch run as sub-process so if error occurs , will not close
V7.1 : Updated the fm radio install zip and include the needed selinux mode changer app
V8: fixed dependency of needing to be unzipped to location w/o spaces in name. (when used from location with spaces, tool used to fail to push needed files).
.. added more time to allow dirtycow to "spawn" its root shell. Recent testing has shown sometimes it takes longer than the 60 seconds allowed in the script. Now it is looped 3 times.
V9 Added full path to abd push lines for recovery flash files. included fastboot.exe file to address some version issue where user s version would not output text file I coded into script for a verification ( included file is called by script, no need to do anything different with it)
V10: Moved zip file to included folder to help preserve locations when unpacked, added device check before running tool; So tool not used on wrong device, Rearranged order of operations on extra's page. (recovery installed options) Push files while in android before rebooting to recovery( should improve reliability for multiple reports of not automatically installing options for some)
******I have received some reports that some devices are reporting "ro.build.product =R1_HD and not "BLU_R1_HD" like mine, so the added device check is blocking tool from starting If this happens to you , you can make edit to the .bat file like below.
Change this line
Code:
:next_check
find "BLU_R1_HD" "%~dp0workingproduct.txt"
To this
Code:
:next_check
find "R1_HD" "%~dp0workingproduct.txt"
it is line #23
V11: Updated device model verification lines
MTK-SU: Replaced all dirty-cow part with New MTK-SU binary(elf) from @diplomatic
source
Click to expand...
Click to collapse
Credits to @Diplomatic for his work on the Mtk_su that I used used to make this tool work again after Dirty-Cow was patched.
DOWNLOAD LINK
Preferred to use the Downloads tab of this thread.
Archived downloads on android file host also == link
XDA:DevDB Information
R1-HD Dirty-cow Unlock Tool, Tool/Utility for the BLU R1 HD
Contributors
mrmazak, vampirefo for his recovery, lopestom for his recovery, emc2cube for his debloat zips, christianrodher for his dirtycow method,
Source Code: https://github.com/mrmazakblu/DirtyCow-R1_HD
Version Information
Status: Testing
Current Stable Version: V11
Stable Release Date: 2017-04-11
Current Beta Version: MTK-SU
Beta Release Date: 2019-04-14
Created 2017-02-22
Last Updated 2019-04-18

Reserved
Items planed to be addressed in next release:
--Add few more file integrity checks to the extra's page
--Add copy log to clipboard option so it is easier to post log entry if needed-------*********----already-_added to github copy of batch file
--Add a verification step that checks what recovery is installed( to prevent trying to do steps on extra's page with stock recovery)
--Possibly move to a "fastboot boot recovery" instead of "adb reboot recovery" for the same reason as above
--Add wget or similar to the extra's items so initial "TOOL" size is smaller (not that 40-50MB is big, but to some it may be )
--Add additional "selinux mode changer apk" for fm radio install rather than just the note that says it needs to be found.

Reserved

Works great on OEM 6.6, thanks for the tool!

So I got the one-click-root.sh done, maybe. Can some linux users go over it, make sure I didn't do anything stupid? I don't exactly have a device to check it with atm, and I am not pro with scripting, barely novice, so it is a pretty basic conversion of the batch file. Still, it might work . Just would like a few eyes on first.
https://github.com/theredbaron1834/Scripts/blob/master/one-click-root.sh
Also, I looked at dirty-cow-tool.bat. However, wow, more an advanced batch file, and I am not sure what the first half does, so not sure how to convert . However, it seems if anyone does get it, the eqiv of goto for linux is funtions. simple cheatsheet:
Code:
function stuff {
echo "this stuff is run via the function"
{
stuff #goes to stuff and runs function

theredbaron1834 said:
So I got the one-click-root.sh done, maybe. Can some linux users go over it, make sure I didn't do anything stupid? I don't exactly have a device to check it with atm, and I am not pro with scripting, barely novice, so it is a pretty basic conversion of the batch file. Still, it might work . Just would like a few eyes on first.
https://github.com/theredbaron1834/Scripts/blob/master/one-click-root.sh
Also, I looked at dirty-cow-tool.bat. However, wow, more an advanced batch file, and I am not sure what the first half does, so not sure how to convert . However, it seems if anyone does get it, the eqiv of goto for linux is funtions. simple cheatsheet:
Code:
function stuff {
echo "this stuff is run via the function"
{
stuff #goes to stuff and runs function
Click to expand...
Click to collapse
thank you for your input.
As far as the begining of the batch, It is adding a few folders to the "path" variable so help ensure the "adb push" commands find the files it is trying to push. Then it sets some folder "flags" to hidden so that the files the batch needs don't get accidentally moved or changed. Then the large section with mostly "echo" that is to set up the "simulated" G.U.I.
The lines of just "::::::::::" are simply used to help with reading the batch file. i use them to seperate functions. They are not needed.
The lines with only 2 "::" are standard windows comment / remark line entries
The lines with 1 ":" are the beginning line of the loop/ function == the line that "goto *" searches for

Does Works to unlock 7.4.2?

khyr said:
Does Works to unlock 7.4.2?
Click to expand...
Click to collapse
It is supposed to. It is the same base codes used from original script, and that one was confirmed to work. I Do not have first hand use of V7.4.2 so it is only confirmed through other users.
The dirty-cow being used has been patched by google in Dec but blu has not rolled out the patch. So there is no reason for it not to work.

edit:
I have the linux version ready.
-the first step, (ADB Push) is ready. including md5 file checks
-step 2 is ready= running dirty-cow with md5 check before final writing to mmcblk device
-step 3 is ready unlocking bootloader = including check if unlock is done, but need to fix the "unlock_adility" check
I can make to file to compare and grep the line needed, but cannot "sed" the extra information or do a > < comparison
-step 4 is ready .--flash twrp
Finished 90% of tool.
still need to tweek the log feature.
I ran tests on the lop back to menu and test ran
1. push files for dirty-cow and md5 check . then made push fail to verify the check method was valid ==pass
2. run dirty cow commands and md5 verification on resulting file. ==pass
3.unlock bootloader --- I ran it (needed to fake the already unlocked check) it works == pass
4 . flash twrp --installed both version i have, both install fine ===pass
5 extra menus -- ran . install su-----debloat---rebloat--- add fm radio--- preloader roll back =====all pass
(bootloader roll back needs manual intervention to re-enter fastboot during the boot loop that is unavoidable)
6. instruction ====not written yet
7. exit yes it closes == pass
8. logs --- needs completeing

I just loaded this on my OTA updated 7.4.2 device. I would note that the batch file does not actually create the /sdcard/Download folder so you might need to go into the terminal and actually create this on your sdcard... also worth noting that this batch file **requires** an sd card in the device to do any of the loads in the "5" menu.

torchredfrc said:
I just loaded this on my OTA updated 7.4.2 device. I would note that the batch file does not actually create the /sdcard/Download folder so you might need to go into the terminal and actually create this on your sdcard... also worth noting that this batch file **requires** an sd card in the device to do any of the loads in the "5" menu.
Click to expand...
Click to collapse
no it does not.
the /sdcard is the internal memory and the Download folder is already there.
you might be having issues but the folder is already part of normal system

mrmazak said:
no it does not.
the /sdcard is the internal memory and the Download folder is already there.
you might be having issues but the folder is already part of normal system
Click to expand...
Click to collapse
Fair enough, my restore didn't have /sdcard/Download and I made an assumption that /sdcard was my mounted card. Thanks for the insight.

OOPS
found typo on V4 of tool. batch files sets variables for "return", from loop functions. And two returns were set to same label9, so if you had tried to do extra's menu option #8. "ROLL Back Preloader" , instead it was running option # 5. " MTK_BLU Debloat v2"
fixed and still reading and re-reading to search for errors.
This looks bad.
The reason I put together this tool was I felt it was important to make a way to minimize the problems usually associated with android modifications. By making "typo's" a thing of the past, and I found them in my own script.
re-posted V5 combined with linux V2--

torchredfrc said:
I just loaded this on my OTA updated 7.4.2 device. I would note that the batch file does not actually create the /sdcard/Download folder so you might need to go into the terminal and actually create this on your sdcard... also worth noting that this batch file **requires** an sd card in the device to do any of the loads in the "5" menu.
Click to expand...
Click to collapse
I'm a total noob, and I'd like to know how to proceed with the supersu and all the other parts of step 5. Thank you

gabriel986 said:
I'm a total noob, and I'd like to know how to proceed with the supersu and all the other parts of step 5. Thank you
Click to expand...
Click to collapse
Ok. After you have completed upto twrp install. You can do the options on #5. It is all programed and automatic. What is does is put zip files onto the phone and reboots phone into recovery, then recovery installs them.

mrmazak said:
Ok. After you have completed upto twrp install. You can do the options on #5. It is all programed and automatic. What is does is put zip files onto the phone and reboots phone into recovery, then recovery installs them.
Click to expand...
Click to collapse
I get up to the recovery installation, but then I can not access such recovery on the phone, If I turn it on with power+vol up, it takes me to the default factory recovery by blu.
And If I try to the super su step with the phone on, it resets it, and get it to the screen with the dead android, while the script just shows the ADB DETECTED message.
In case it's needed, my R1 HD is running on
BLU_R0010UU_V7.4.2_GENERIC 09-11-2016 13:38

gabriel986 said:
I get up to the recovery installation, but then I can not access such recovery on the phone, If I turn it on with power+vol up, it takes me to the default factory recovery by blu.
And If I try to the super su step with the phone on, it resets it, and get it to the screen with the dead android, while the script just shows the ADB DETECTED message.
Click to expand...
Click to collapse
You missed a step in the process.
As tool finishes the recovery install it comes to a "pause" in the script, you need to hold the volume up button on phone "before" pressing button on pc keyboard to continue.
If phone does a normal reboot at this point then the system will replace the newly installed recovery with the stock one.
Giving you the situation you have now.
This step I cannot control, you must press volume button on phone to get the boot menu, and directly boot into recovery to ensure that the install sticks.

mrmazak said:
You missed a step in the process.
As tool finishes the recovery install it comes to a "pause" in the script, you need to hold the volume up button on phone "before" pressing button on pc keyboard to continue.
If phone does a normal reboot at this point then the system will replace the newly installed recovery with the stock one.
Giving you the situation you have now.
This step I cannot control, you must press volume button on phone to get the boot menu, and directly boot into recovery to ensure that the install sticks.
Click to expand...
Click to collapse
trying again....
for how long should I press the volume up key?

gabriel986 said:
trying again....
for how long should I press the volume up key?
Click to expand...
Click to collapse
When tool says Hold button , keep it held. Then continue the script. Phone should reboot to the boot menu. Then let go of volume
Some phones do not accept the fastboot reboot command, on those phones need to hold power to shut off. Then volume and power together to come on, release power when screen come on

mrmazak said:
When tool says Hold button , keep it held. Then continue the script. Phone should reboot to the boot menu. Then let go of volume
Some phones do not accept the fastboot reboot command, on those phones need to hold power to shut off. Then volume and power together to come on, release power when screen come on
Click to expand...
Click to collapse
ok.. trying again
---------- Post added at 02:00 PM ---------- Previous post was at 01:46 PM ----------
gabriel986 said:
trying again....
for how long should I press the volume up key?
Click to expand...
Click to collapse
it beat me!
I get stuck in that part of the process, If anyone uploads a video to check what i'm doing wrong, I'll be grateful.

Fool-proof, 100% squeaky clean oneplus 2 custom rom installation for max stability

​Welcome to a simple tutorial that will help OnePlus 2 (OP2) owners and possibly other device owners install custom ROMs in such a way that eliminates most, if not all possibility of system errors, resulting in the longest lasting and most stable custom ROM installations!
DISCLAIMER: Your Warranty was voided long before you were ever even ready to complete this tutorial.
Therefore, I am not responsible for a broken or bricked device, especially if your rage towards a bricked device caused you to throw your device into a wall. This tutorial is actually designed to reduce the amount of "Rage Quitting" on modifying your device.​
This Tutorial assumes you have already completed OEM Unlock, Root, installed TWRP or other Custom Recovery, and are basically ready to install a custom ROM on your OP2.
Before beginning, backup any files you may need, I upload mine to my Google Drive then download after completing the ROM install. You can also use Nandroid to backup your current system (optional as there are methods to restore even the most bricked OP2 that doesnt even have a working recovery or OS, trust me I have done it at least 5 times because I constantly try new ROMs and mods). There are three necessary prerequisite steps required to complete before using this method to install your custom ROM. These prerequisites are listed below:​
Prerequisite One: Ensure your OnePlus 2 has been FULLY updated on the stock Oxygen OS ROM before you install your TWRP or other Custom Recovery. If not, Return to factory ROM, Un-Root, and update until you cannot update any more, then return to this tutorial afterwards.
Prerequisite Two: Ensure your OnePlus 2 has the latest update of the TWRP or other Custom Recovery. The Latest TWRP for the OP2 can be found here: https://twrp.me/oneplus/oneplustwo.html
Prerequisite Three: Ensure your device can receive files via ADB PUSH while in custom recovery. To do this, reboot your phone into recovery, connect to PC, hold down the "Shift" key and while holding, right-click in a window containing a file you wish to transfer, and select "Open Windows PowerShell Here" or "Open Command Prompt Here". Use the command "adb push Lin15.zip /sdcard" (remove the quotes, "Lin15.zip" is an example file) to push the file onto your device. Then, if your custom recovery has a file explorer as TWRP does, use it to navigate to /sdcard and see if the file is there. Also, your windows should show a successful transfer and should say "Okay" underneath your command line. If unsuccessful, install OnePlus 2 Drivers along with Universal ADB drivers and then try again. If still unsuccessful, try TWRP 3.1.1-0 (Download Link Below 2 Paragraphs in Blue Text Section). If unsuccessful at this point, there is something wrong as Win 10 with OP2 Drivers, Universal ADB Drivers, and TWRP 3.1.1-0 is my exact setup.
There are many custom ROMs available for the OP2. The method for installing custom ROMs is generally the same, but can differ in certain ways. This method SHOULD work for your custom ROM, but is not guaranteed. If this method fails, then visit your custom ROM's development page, and follow their instructions instead.
In this Example, I will be installing the latest (at the time of writing) Lineage 15 Android Oreo 8.0 Third Alpha Build OS/ROM and will be including instructions for the proper installation of the A.R.I.S.E. Magnum Opus System Sound Mod (Based on Viper4Android). I will include links to downloads, but their main XDA page can be found here: https://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709 This installation will use the latest (at the time of writing) TWRP 3.1.1-0 Custom Recovery.
INSTALL TIME:​
Begin by rebooting into recovery. Under "Wipe" options, you will first want to format data, select the option and type "yes" when prompted to confirm the operation. Repeat this step once again to ensure a squeaky clean wipe.
Next, also under "Wipe" Options, select the "Advanced Wipe" Options. You will then select EVERY BOX (Yes, this includes Internal Storage and will wipe EVERY SINGLE FILE from your device, this is INTENTIONAL and is why you MUST have a device that can accept ADB PUSH files in recovery!). This will wipe every file from existence, completely. This is what allows such a stable, squeaky clean install, as not a single piece of evidence from any other ROM/OS will be left behind, leaving basically no chance for errors or conflicts during installation of new ROM. You will want to complete this step again to ensure a squeaky clean wipe.
Navigate to the TWRP Home/Start-Up Screen and connect your device to your PC (WARNING: DO NOT USE ADB SIDELOAD MODE!!! I HAVE NEVER, EVER HAD A SUCCESSFUL ROM INSTALL FROM SIDELOAD!!!). Simply leave the device at this screen, and do not touch it. At this point, if you do not have all the necessary files to install your custom ROM and mods, you will need to download them now. I ALWAYS recommend the "Pico" Gapps package if installed in a ROM (some ROMs include Gapps). The reason for this is because the Pico package includes the bare minimum to get Google Play Services and Google Play Store up and running. This eliminates unwanted Gapps and reduces the chance of installation conflicts. The golden rule is: The less you install in TWRP, the better. If you want more Gapps, then after setting up the phone at the end of the ROM install, just search for them in the Google Play Store, its how I get mine every time. In the case of Lineage 15, the list of downloads is below:
Lineage 15 OS/ROM: https://www.androidfilehost.com/?fid=961840155545594199 (Dev Page: https://forum.xda-developers.com/oneplus-2/development/rom-lineageos-15-0-t3668056)
Android Oreo 8.0 Pico Gapps Package: https://www.androidfilehost.com/?fid=817550096634796662
Super SU 2.82 Root Installer (Select the Flashable 2.82 ZIP file): http://www.supersu.com/download
BusyBox Flashable Zip Package (Large page with many tools, scroll down to find the BusyBox tool): https://forum.xda-developers.com/showthread.php?t=2239421
A.R.I.S.E. Magnum Opus System Sound Mod (Select the "ARISE+Deuteronomy+2.94+Modular+AROMA+Installer.zip" Option): https://www.androidfilehost.com/?w=files&flid=176171
Once all necessary files are downloaded, give them their own folder inside Windows and rename all of them to something simple as shown here:
View attachment 4273530
(Lin15.zip, Gap.zip, SU.zip, Busy.zip, Arise.zip)
Ensure your device is in custom recovery at the home/startup screen and is plugged firmly into your PC. DO NOT navigate ANYWHERE inside custom recovery or touch the device.
Now we will ADB PUSH these fresh install ZIP files over to your device. Inside the window containing your downloaded ROM files, hold down the "Shift" key and while holding, right-click and select "Open Windows PowerShell Here" or "Open Command Prompt Here". To ADB PUSH files, simply type "adb push FILE.zip /sdcard" where "FILE" is the target file and "/sdcard" is the target destination. Correct capitalization of letters is IMPORTANT! My window looked like this when finished:
View attachment 4273532
(adb push Lin15.zip /sdcard, adb push Gap.zip /sdcard, adb push SU.zip /sdcard, adb push Busy.zip /sdcard, adb push Arise.zip /sdcard)
Your ROM files should now appear on your device at your target destination. Disconnect your device and use the Custom Recovery File Explorer to navigate to the destination to confirm. "/sdcard" is the easiest to use destination.
Now we will install ALL of the ROM files, back-to-back with NO REBOOTS, NO WIPES, NO OPERATIONS WHATSOEVER INBETWEEN INSTALLS, THIS IS EXTREMELY IMPORTANT!!! Navigate to the Custom Recovery "Install" Section and navigate to your destination for your files. Flash the ZIP files in this order EXACTLY: Lin15, Gap, SU, Busy, Arise.
The A.R.I.S.E. Instillation is an AROMA style installer. It is a HUGE Sound Mod suite containing many options. Select the sound mods you like, but there is a module that is REQUIRED and 4 others that are highly recommended, listed below:
CORE Module is REQUIRED!!! Uninstall MusicFX, Remove Deep_Buffer, Set SELinux to Permissive, and SD Card Permissions fix are all highly recommended no matter what the ROM or mods, just in case. If these problems do not exist, selecting the options will not change anything, so do not worry.
My personal A.R.I.S.E. install included the following modules and delivers absolutely AMAZING sound quality while keeping installed modules to a minimum (otherwise known as a "Lightweight" install): Core Module, Viper4Arise 2.5.0.5, Viper4Arise Profiles, Uninstall MusicFX, Remove Deep_Buffer, Set SELinux to Permissive, and SD Card Permissions Fix. Its a highly recommended package
ONLY AFTER ALL FILES HAVE BEEN INSTALLED, navigate to Custom Recovery "Wipe" section, select "Advanced Wipe" and then check the "Dalvik Cache" and "Cache" options, DO NOT SELECT ANYTHING ELSE OR YOU WILL NEED TO START COMPLETELY OVER, WIPE PHONE AND RE-ADB PUSH FILES TO ENSURE A SQUEAKY CLEAN INSTALL!!! Perform this step again to ensure a squeaky clean wipe.
YOU ARE NOW FINISHED WITH A SQUEAKY CLEAN ROM INSTALL BUT THERE ARE A FEW MORE RECOMMENDED STEPS!
Recommended: DO NOT immediately reboot into system after install. Instead, navigate to Custom Recovery "Reboot" Section and select "Power Off" Instead. Once device is off, plug into A/C Outlet charger (DO NOT USE A PC, DETECTION OF PC WILL CAUSE DEVICE TO BOOT), and allow to fully charge, then cool off. This will ensure that Battery Calibration is set to 100% upon Initial Boot
Initial Boot: Boot Device, Initial boot will take around 5-10 minutes. DO NOT TOUCH THE DEVICE DURING THIS TIME. When you see the startup screen, STILL DO NOT TOUCH THE DEVICE! Instead, allow device to sit and idle, allowing the ROM to "Settle" for a MINUMUM of 5 minutes, 10 is recommended. Then, BEFORE setting up the device, reboot and allow another 5 minutes of "settling".
Run through the Device Initial Setup. You will want to select any desired options now, and avoid having to search settings later. Once at Device Home Screen, immediately open app drawer and select SuperSU app. Inside SuperSU, navigate to settings and apply the following options:
Disable Re-Authentication, Default Access: Grant, Enable SU During Boot, Trust System User
These SuperSU options will allow mods to function with complete stability and no interference, leading to a smoother experience. After, completing this step, Reboot your phone and ENJOY YOUR NEW, ROCK-SOLID, STABLE ROM INSTALL!!!

Nice job bro thanks working here!

Nopes. It did not work out for me. I flashed ROM, Gapps, and Magisk before and landed on your thread and flashed only the ARISE zip. But it did not flashed properly and I got an error 1 or something like that. What could be the reason?

Why are people recommending using adb push to get the files on the phone.
I always just drag and drop them on the phone in windows explorer, never had any problems.
Only time I ever need adb is for flashing recovery.

shailinder said:
Nopes. It did not work out for me. I flashed ROM, Gapps, and Magisk before and landed on your thread and flashed only the ARISE zip. But it did not flashed properly and I got an error 1 or something like that. What could be the reason?
Click to expand...
Click to collapse
Now I tried it again and this time flashed busy box as well but the same error.
Screen shot for your reference. Is there another way to install it?

shailinder said:
Nopes. It did not work out for me. I flashed ROM, Gapps, and Magisk before and landed on your thread and flashed only the ARISE zip. But it did not flashed properly and I got an error 1 or something like that. What could be the reason?
Click to expand...
Click to collapse
Error 1 is what occurs on the non-AROMA older A.R.I.S.E. package install if you have not set up any settings in the customizable .prop file that comes with the ZIP. Upon initial install, this "Error 1" will install a .prop file under /sdcard. If you open this .prop file with a text editor, you can then use examples such as "install.core=true" to install the core. However, the AROMA installer requires none of this. And as far as I experienced, NONE of the other packages work on Lineage 15. You will want to delete whatever A.R.I.S.E. zip you have now, and follow my download link for the AROMA version. Then, wipe everything and perform a "Squeaky Clean" ROM install as shown in this thread, and it should work and be rock-solid stable.

pops106 said:
Why are people recommending using adb push to get the files on the phone.
I always just drag and drop them on the phone in windows explorer, never had any problems.
Only time I ever need adb is for flashing recovery.
Click to expand...
Click to collapse
Well we all know performing this method of install is not a requirement for installing ROMs, but it is the most fool-proof method and ensures there are no file conflicts between old and new ROMs/OS's. I cannot even tell you how many times I have done quick, minimal work installs and end up with tons of errors, laggy or freezing screens at random times, force closing apps, busybox system link failures, the list goes on and on. After using the "Squeaky Clean" method, I can honestly say Lineage 15 is as stable as the Stock/Factory Oxygen OS.

wallacengineering said:
Error 1 is what occurs on the non-AROMA older A.R.I.S.E. package install if you have not set up any settings in the customizable .prop file that comes with the ZIP. Upon initial install, this "Error 1" will install a .prop file under /sdcard. If you open this .prop file with a text editor, you can then use examples such as "install.core=true" to install the core. However, the AROMA installer requires none of this. And as far as I experienced, NONE of the other packages work on Lineage 15. You will want to delete whatever A.R.I.S.E. zip you have now, and follow my download link for the AROMA version. Then, wipe everything and perform a "Squeaky Clean" ROM install as shown in this thread, and it should work and be rock-solid stable.
Click to expand...
Click to collapse
Thanks. I got it install using a different method and it is working wonderfully.

wallacengineering said:
Error 1 is what occurs on the non-AROMA older A.R.I.S.E. package install if you have not set up any settings in the customizable .prop file that comes with the ZIP. Upon initial install, this "Error 1" will install a .prop file under /sdcard. If you open this .prop file with a text editor, you can then use examples such as "install.core=true" to install the core. However, the AROMA installer requires none of this. And as far as I experienced, NONE of the other packages work on Lineage 15. You will want to delete whatever A.R.I.S.E. zip you have now, and follow my download link for the AROMA version. Then, wipe everything and perform a "Squeaky Clean" ROM install as shown in this thread, and it should work and be rock-solid stable.
Click to expand...
Click to collapse
Fair enough
And thanks to the opp for the thread

pops106 said:
Fair enough
And thanks to the opp for the thread
Click to expand...
Click to collapse
No problem, the thread was a random idea after accidentally stumbling across the fact that TWRP can accept ADB PUSH files. I honestly had no idea, and was stuck in a bootloop after a custom ROM failed to install correctly. I had no backup and was getting ready to just give up, enter Qualcomm Diagnostics Mode and perform the Oxygen OS Firmware/Software OEM install when I decided to reboot into Recovery and attempt SideLoad of a previous ROM that had worked.
This did not work, as sideload is apparently a dumb way of doing things. I never understood why sideload tries to install a file that is in the middle of transferring. Just seems like a flawed concept to me. Anyways the install was very slow, buggy and laggy, and when finished had installed such a corrupt system, due to installing a partially transferred file while it is being transfered and then sticking all the pieces together, was so unstable that more than a minute idling at the home screen or any attempt to open ANY app caused the phone to reboot.
Sideload is a worthless feature in my opinion and I will never use it for any operation ever again so long as I live. So all of a sudden I decide to plug the phone into my PC while in recovery and observe how Windows detects the phone when you turn Sideload mode on and off, as to try and troubleshoot my sideload to get an effective install (which by the way will never happen, to this day I have never had a sideload install work correctly), and noticed when I turned it off, the device still showed up as a recognized Android device under Windows Device Manager. Then, you may not believe me on this, but I did actually randomly decide that more than likely, it was interfaced on Universal ADB, and that it I typed "adb devices" into a windows command prompt, it should show, and it did. The rest is history.
I know the feature had been around for some time as I found out later on, but I had never seen any information about it anywhere on any thread, and even when I asked for ideas for troubleshooting, while XDA users helped for sure, I guess they just didnt have that idea, and gave me alternative routes as well such as the Qualcomm Diagnostics full OEM wipe method which I was already familiar with. This does show, however; that experimenting and troubleshooting on your own can be a great way to learn new things!

Hi, thank you for the post.
I am enjoying v4a bcoz of you only.
I got a query btw, can I install dolby & atmos along with v4Arise?

Please add a note for HaruhiOS
HaruhiOS checks if a clean flash is required before flashing and will abort to tell the user that a clean flash is necessary if ever. It is my design goal to avoid the need for clean flashing as much as possible
Due to this the user should avoid unnecessary clean flashing, which actually ruins performance and battery life and reduces device health when using my ROM

if already.....
hey,
if one would already go thus far to wipe internal storage as well, i'd say that it's making sense to format storage by changen from ext4 to ext2 and back to ext4. wiping is not always getting us rid of all residues while changing the file system and going back to the one we want/need does indeed reformat everything, this is a procedure that is useful once the storage card is corrupted.

magnamentis said:
hey,
if one would already go thus far to wipe internal storage as well, i'd say that it's making sense to format storage by changen from ext4 to ext2 and back to ext4. wiping is not always getting us rid of all residues while changing the file system and going back to the one we want/need does indeed reformat everything, this is a procedure that is useful once the storage card is corrupted.
Click to expand...
Click to collapse
Apparently e2fsck and fsck.f2fs is too hard
Once the storage card is corrupt no formatting will help you anyways
Just stop believing in dumb stuff. If you have to clean flash every other build a ROM developer releases they messed up big time and they should fix their code

COMPLETE GUIDE: Installing Android 11 with GApps and Rooted System with Magisk on Razer Phone 2

Update: At the time of writing this, I completely forgot that I am running Linux Mint - Cinnamon 20.1 on my laptop, which connects the bluetooth with my phone just fine. However, it did NOT work when I booted into windows and tried it. I am not sure why this is, but just beware. I recommend that you look into it yourself and see if you can find a resolution that works for you if you aren't using a linux os.
Hi everyone, after using another guide on here by Marcos8760, I noticed that there were a lot of things missing from the steps layed out, and decided to create my own guide with every step that should be done to have a fully functional Razer 2 with Android 11 OS. I will be using a part of his guide in this tutorial, and the link to his if you want to check it out is: https://forum.xda-developers.com/t/guide-android-11-gsi-with-gapps-and-root-magisk.4216117/
**DISCLAIMER**
First, I am not responsible for any bricked devices or errors that occur. This is completely at your own risk.
Second, this OS is NOT supported by Verizon. If you use Verizon then this will not be able to work on your phone.
Third, MAKE SURE that you have backed up all your files and data before doing this, again, I am not responsible
for you losing your data, because you will lose it if it isn't backed up, and I have warned you to do so.
Fourth, any commands will be in '' quotes, do not type these into your own cmd window, they are just to indicate what the commands are.
Last, This is not a troubleshooting guide, I am not covering how to fix errors, only simply how to install and get working with the Android 11 GSI. If there are errors please try to do research and resolve them on your own.
Before we begin anything, we need a few tools. These are the download links to all the files you will need to complete this process.
1. You will need a program such as WinRar, 7zip, or my personal fav, WinZip, to be able to extract these files, make sure you have one of these installed before proceeding.
2. We need to have a backup of the stock firmware in case of any kind of bootlooping or other bricking that might occur that you can revert back to. Extract this.
Link: https://s3.amazonaws.com/cheryl-factory-images/aura-p-release-3201-user-full.zip
3. This is the link to the GSI we will be installing. If you want a rooted system, you need to download system-roar-arm64-ab-vndklite-gapps.img.xz file. This will allow you to install Magisk and enable Google's Play Protect which is what this guide will be about, of course you can choose your own, however you will have to figure out how to get play protect certified yourself. Extract This.
https://github.com/phhusson/treble_experimentations/releases
4. We need the kernel that allows TWRP to be installed, which is the file manager we will be using for some of the programs we need to install, as well as being able to boot the phone up during this process. Extract This.
https://github.com/francisrosario/a...load/4.0/TrinityKernel-kernel-r4-20200512.zip
5. This is a file system program used to write large scale data with much faster read and write speeds for Linux and Android systems alike. Here is a link to learn more about it: https://c.mi.com/thread-2487060-1-0.html
*DL link: https://arter97.com/browse/aura/f2fs/20190114/f2fs_fstab.zip
*Leave this as a zip file, you just simply need to save it.
6. Here is the link to the latest Magisk version. (Needed to root the device) Leave as zip file.
https://github.com/topjohnwu/Magisk/releases/tag/v21.3
7. We need a program called VoLTE Fix-It. This is needed to enable your mobile network and data for LTE on this GSI.
*https://github.com/KhushrajRathod/VoLTE-Fix
*Just press the green 'Code' button and download as zip. Leave this as a zip file as well.
8. We need the Android ADB Driver to be able to enter commands to install everything.
https://developer.android.com/studio/run/win-usb Click download zip, accept agreement, and download and extract.
9. We need Android SDK Platform Tools to be able to run fastboot and adb commands. Extract this.
https://developer.android.com/studio/releases/platform-tools
10. Lastly, (I promise), you need the Qualcomm Android USB Driver. The link explains why. Extract this and go through the setup and install.
https://gsmusbdrivers.com/download/android-qualcomm-usb-driver/
Now we can begin the process.
First, copy all of the files in the aura-p-release folder, and paste them into the platform tools folder where all of those files are. Then enable USB debugging on your phone. Go to settings, click on About Phone, scroll to bottom and tap "Build Number' 7 times. You are now in dev mode. Search in the search bar for usb debug, tap it, then enable it and select allow.
To install the Android ADB driver, right click on start (Windows icon in bottom left of task bar), select device manager. Then we need to go into fastboot mode. Hold both volume buttons and power button down, be patient, it takes a second. When the screen goes black immediately press and hold the Volume down button for at least 3-5 seconds until a screen comes up that has an option to 'Restart Bootloader' at the top. Now we can install the driver. You should have device manager open, an option called 'Other devices' should come up, with Android that has a yellow exclamation mark by it. If it doesn't, unplug and replug the phone's usb, and it should. Once that shows up, right click and select update driver. Select Browse computer, select Let me pick. Show All devices should be selected, if not, go ahead and do so, then click next. Select 'Have Disk', Select Android ADB Interface, click browse and go to the folder where you downloaded the ADB driver, then select 'android_winusb' and click ok. Click ok again, a warning will come up, you don't need to worry it is needed to install this OS, so go ahead and click yes. It should install, you can close out when it is finished.
Next, in file explorer open the folder with all of the platform tools and aura-p-release files. Erase what is in the address bar, and type 'cmd', press enter. This will open a command prompt window in this location. Now, type in the cmd window, 'fastboot devices' and a serial number should show up. If not, then you have done something wrong or missed a step and need to uninstall the driver and go back into fastboot mode and do it again, or refer to the last disclaimer I made. Now, if the serial number did show, we can proceed. First we need to unlock the bootloader (if it isn't already) to be able to root and install. Type in the cmd window 'fastboot flashing unlock' and press enter, a confirmation should pop up on the device, use the volume buttons to navigate and the power button to select and confirm. When thats done, type in 'fastboot flashing unlock_critical', again a confirmation should come up so just do the same.
We can get into the meat of the installation process now.
You should still be in fastboot mode. In the cmd window, type 'fastboot flash system' and drag and drop the system-roar file you downloaded and extracted in file explorer into the cmd window.
Your command will look a little something like this: fastboot flash system C:\Users\user\Desktop\system-roar-arm64-ab-gapps.img
The file path will be different depending on where you downloaded the image to.
Wait until it says complete or something similar like done and has no errors. Then, its time to flash the kernel. Navigate to the where you downloaded the TrinityKernel file, open it. There should be a .img filed simply called 'boot.img'. Go back to your cmd window, and we will be typing in: "fastboot flash boot" then drag and drop the boot.img file, like you did with the system file, again, wait until it says done or complete and has no errors.
After that is done, use the volume buttons to select restartt bootloader with your power button on your phone. When it reboots, go to recovery mode, check never show this screen, and swipe where it says to swipe. Go to the wipe menu and then tap on format data. Type yes and then press enter/ok. Go back to your computer and open file explorer.
Next, copy and paste the f2fs zip file using windows explorer into the Razer 2's internal storage.
Head back to your phone, and press install. Scroll down until you find the zip file and press it and install it. (ignore the errors that may or may not be there) After that go back to the TWRP home screen, button that looks like a house at the bottom in the middle, go to the reboot menu, then reboot into recovery. When it reboots, go to wipe menu, and tap on format data and type in "yes" and tap ok again. Click on "don't install" because you don't need the TWRP app on your phone.
Next we need to install magisk to enable google play protect cert and have a rooted system. Just do the exact same thing that you just did with the f2fs file, except do not format data this time.
Select mount and check all the boxes. Go back to home page and select install, scroll to magisk and swipe to install.
Now, this is where you have to make a big decision. Bluetooth on this rom is a fickle son of a gun. I have tried to make it work on a pc that doesn't have bluetooth software built into it for a very lengthy amount of time, trying all sorts of things. The only way I could get it to connect is by setting it as a device to control with my keyboard and mouse. Maybe you will have better luck, but I have confirmed that the bluetooth works on devices with already built in bluetooth software. It works perfectly on my laptop and in my car. So, if you want to proceed with this, then I will tell you, if not, you can skip over it.
Select advanced on the home menu, go to file manager, select vendor then overlay. delete BOTH the bluetoothcommon.apk and razeraurabluetooth.apk.
This step applies to those who skipped the bt part as well. Go back to home, select reboot and click system, when it reboots, select allow usb debugging, DO NOT DO ANYTHING ELSE. THIS IS CRITICAL. Go back to your cmd window and type "adb devices", a serial number should show, then type the following cmds in order: "adb root", "adb shell", "mount -o remount,rw /", "mv /bin/resetprop_phh /bin/phh-resetprop" - if this one gives an error saying its in use, don't worry, just do the next cmd, which is "phh-securize.sh"
If the 3rd cmd gave the error, the last cmd will ask if you want to confirm it, click y for yes for each option it gives, it should go thru and the device should reboot.
Now then, it may seem slow during set up, but set it up like normal. Everything should be well and good. after you finish setup, to enable better fps, go into settings, select phh settings, select misc features, scroll down to and click on 'force fps', select the last option to have 120fps, but you have to do it twice because for some reason it doesn't change to the very last option the first time.
Now, we have to setup your mobile network with volte, it is a program that allows LTE coverage from your carrier to enable data on custom gsi roms. Now, go to the volte fix it zip file in file explorer, copy paste to the phone's internal storage. Go into fastboot mode, select recovery, it will boot into twrp. Do the same thing as the other zip files, install then select and swipe. Now press home button and select reboot, click system. Go to phh settings, click ims features, check the boxes on the bottom 2 options, click on create ims apn, it wont do anything, then click install ims apk, when it is done a notification will pop up on the bottom that says to reboot, you may now reboot the phone. Once it is booted up, go to network and internet, select mobile network, change pref network type to lte, then enable volte. You should have full service of your mobile network.
There are a few last things. The default camera sucks, I've tested some from the play store, and YouCam is by far the best free camera you can get from there. 2nd, to enable the backlight on the Razer 2, download and install logo+ apk, grant it root perms, and you can select the effects and colors you want it to be. This should be everything to get you going on the gsi. If you want to do custom things like custom boot animations or alarm sounds or whatever, download either root browser or pay for root explorer on the play store, and you can look up how to do whatever you want and you can do it through one of those. There it is. Enjoy the new os and have fun with it!
**IF YOU DO RUN INTO A BOOTLOOP OR ANY SORT OF BRICKING, RETURN TO FASTBOOT MODE BY HOLDING POWER, AND HOLD VOL DOWN WHEN THE SCREEN TURNS BLACK. You can go into platform folder, find the flash_all.bat file, double click and it should bring the phone back to original stock, and you can start over. IF YOU HAVE ANY OTHER ERRORS DURING THIS PROCESS PLEASE TRY TO FIND THE RESOLUTION YOURSELF. This is NOT a troubleshooting guide.**

Nice guide!

The link in Step 4 is broken.

hey i am attempting to install VOLTE because my data works just fine, but i cant make any calls from my phone. I get the error `mobile network is not available` but my data not connected to wifi works. Any ideas. I followed your instructions to a T. i am also on verizon RP2 on Havoc OS if that helps
Thank you Ahead of time!