Hi mate,
i did a stupid mistakes i guess, well yeah very stupid a newbie like me trying to lock with wrong method,
ok the point is, now i have my RN7 it was Unlocked bootloader. but few days ago, i made a mistake.
im trying to lock it through adb fastboot.
by typing fastboot oem lock and tadaa "system destroyed" message appear :s
i tried to flash it through miflash tool, but there is another message "Antirbpass" and its stuck,
trying to EDL, the message of hello packet appear.
then what should i do?
i need to unbricked it
just open your device on fastboot and connect it to your pc , laptop
and and unlock bootloader again with miflash unlock tool
Related
hey guys,
i was trying to convert ZUI to CM and i messed up somewhere and i am only able to access fastboot mode now, my phones bootloader was unlocked before but some xda member told me to relock bootloader and try unlocking again to flash files but it didnt get unlocked after relocking.
so the present situation is i have a locked bootloader in fastboot mode and no recovery.
i want to flash system images through fastboot mode to bring it back to life, but it wont let me do it as bootloader is locked.
i tried unlocking the bootloader and it gives me the below error.
"FAILED. remote: oem unlock is not allowed"
how to get rid of this error and unlock the bootloader?
any help would be appreciated guys.
thanks in advance!
Try to flash via QPST tool with QFil
maryankomar said:
Try to flash via QPST tool with QFil
Click to expand...
Click to collapse
device doesnt show up in QFil
bump! someone please help
Go to fastboot .
Connect zuk to computer
Start adb
Use "fastboot -i 0x2b4c reboot-edl" y will reboot to dl mod and y can install right drivers for 9008 port.
If it not work than when y boot windows , press f8 chose "dont check drivers ....(something)"
Boot windows , uninstall zuk drivers , install it one more time and try to use qfil one more time .
Hi,
I think my P9 Lite is bricked (L31) :crying:
It happened because I've tried to downgrade from Android N EMUI 5 beta to Android M (EMUI 4.1.1) with the dload folder method. I've extracted and put update.app of my B151 firmware inside then 3 buttons and update said successful, but now bootloop and I can't enter recovery or fastboot (vol down + pwr).... I'm stuck in eRecovery and Wifi check for update fails....
>>> EDIT: Okay, good, I can enter fastboot but it says:
"Please connect usb cable, blah blah" (My phone is connected)
Android boot reason
AP_S_COLDBOOT
NA
Volume_down_press_process_func
PHONE locked
FRP Unlock
----
Do I have to unlock the bootloader? If yes, how can I do since I can't boot on Android?
Can I unlock it with fastboot commands or other ways? How?
----
Currently, with fastboot commands, I can't flash system.img or recovery.img. For instance, trying to flash system.img or recovery.img, it says:
C:\Users\Supergren>fastboot flash system "d:/system.img"
target reported max download size of 471859200 bytes
sending sparse 'system' (451070 KB)...
OKAY [ 19.381s]
writing 'system'...
FAILED (remote: Command not allowed)
finished. total time: 19.395s
I guess it's because my bootloader is locked...
I'm a bit lost
>>> EDIT 2: to solve the bootloop after downgrading from N beta to M (b151), I just had to:
1- Shutdown my phone
2- Plug to my computer. That's what I forgot previously to be able to start fastboot mode!
3- Press Volume down + PWR
4- Once in fastboot/rescue mode, open cmd window on my PC and type:
fastboot oem unlock <unlock code> . (For instance: fastboot oem unlock 1234567890123456)
5- Follow unlock procedure instructions and then the phone does a factory reset.
6- The phone reboots and it's done
Wood Man said:
Hi,
I think my P9 Lite is bricked (L31) :crying:
I can enter fastboot but it says:
"Please connect usb cable, blah blah" (My phone is connected)
Android boot reason
AP_S_COLDBOOT
NA
Volume_down_press_process_func
PHONE locked
FRP Unlock
----
Do I have to unlock the bootloader? If yes, how can I do since I can't boot on Android?
Can I unlock it with fastboot commands or other ways? How?
----
Currently, with fastboot commands, I can't flash system.img or recovery.img. For instance, trying to flash system.img or recovery.img, it says;
...
FAILED (remote: Command not allowed)
...
I guess it's because my bootloader is locked...
I'm a bit lost
Click to expand...
Click to collapse
Maybe unlocking the bootloader may help. On fastboot you type fastboot oem unlock
Wood Man said:
Hi,
I think my P9 Lite is bricked (L31) :crying:
I can enter fastboot but it says:
"Please connect usb cable, blah blah" (My phone is connected)
Android boot reason
AP_S_COLDBOOT
NA
Volume_down_press_process_func
PHONE locked
FRP Unlock
----
Do I have to unlock the bootloader? If yes, how can I do since I can't boot on Android?
Can I unlock it with fastboot commands or other ways? How?
----
Currently, with fastboot commands, I can't flash system.img or recovery.img. For instance, trying to flash system.img or recovery.img, it says;
...
FAILED (remote: Command not allowed)
...
I guess it's because my bootloader is locked...
I'm a bit lost
Click to expand...
Click to collapse
To unlock bootloader type ,,fastboot oem unlock.......,,(.....is your unlock code)
To unlock the bootloadee you have to type :
fastboot oem unlock 1234567891234
Sent from my HUAWEI VNS-L31 using XDA Labs
You are all gods! It's solved!
Thanks a lot guys! I really appreciate your fast answers :good:
I've read on the web about the "fastboot oem unlock" method but I didn't know if it worked with P9 Lite. I was afraid to totally brick the phone.
See you later!
Edit: I've updated the thread title with [SOLVED] and wrote what I did to achieve this.
Hey ! You got the same problem as me, excuse me how did you get the unlock code if you couldn't boot the phone... I read and read and your problem was the same i have ... but when i got to fastboot i can't unlock, i dont have the unlock code sh**. Thank you and sorry for my english everybody i hope your eyes didn't hurt hehe
EDIT: I just got the unlock code but I think i'm screwed up... When in fastboot&rescue mode it says FRP Lock... sh**
1francis said:
Hey ! You got the same problem as me, excuse me how did you get the unlock code if you couldn't boot the phone... I read and read and your problem was the same i have ... but when i got to fastboot i can't unlock, i dont have the unlock code sh**. Thank you and sorry for my english everybody i hope your eyes didn't hurt hehe
EDIT: I just got the unlock code but I think i'm screwed up... When in fastboot&rescue mode it says FRP Lock... sh**
Click to expand...
Click to collapse
Frp lock means Factory Reset Protection. If it says Phone UNLOCKED means ur bootloader is unlocked.
1francis said:
Hey ! You got the same problem as me, excuse me how did you get the unlock code if you couldn't boot the phone... I read and read and your problem was the same i have ... but when i got to fastboot i can't unlock, i dont have the unlock code sh**. Thank you and sorry for my english everybody i hope your eyes didn't hurt hehe
EDIT: I just got the unlock code but I think i'm screwed up... When in fastboot&rescue mode it says FRP Lock... sh**
Click to expand...
Click to collapse
go to developer option and activate oem unlocking
this will unlock frp
Right. The issue is that phone is stuck on huawei logo
1francis said:
Right. The issue is that phone is stuck on huawei logo
Click to expand...
Click to collapse
Buy DC phoenix 15euros and flash it same happen to me last day
Hi everyone,
I am the owner of an A2017G, unlocked bootloader.
I tried them all, but all of them and I can't get into fastboot / bootloader mode.
Ihave flash rom via MIFLASH and AXON7 EDL TOOL using rom Nougat and Oreo, but the result is always the same !!!
Do you have any ideas to help me, perpetuate?
Thank you.
Use miflash and flash unlock bootloader image by Turkdev, even in oreo it will give you fastboot menu.
I did this 3 days ago to relock my bootloader
Use this tutorial:
https://forum.xda-developers.com/axon-7/how-to/guide-unlock-bootloader-easily-t3704595
The reason you lose your fastboot menu because you unlock BL with another image (using Axon 7 EDL tool perhaps), but if you do unlock with turkdev image in tutorial, your fastboot menu will stay there
YoungAll said:
Use miflash and flash unlock bootloader image by Turkdev, even in oreo it will give you fastboot menu.
I did this 3 days ago to relock my bootloader
Use this tutorial:
https://forum.xda-developers.com/axon-7/how-to/guide-unlock-bootloader-easily-t3704595
The reason you lose your fastboot menu because you unlock BL with another image (using Axon 7 EDL tool perhaps), but if you do unlock with turkdev image in tutorial, your fastboot menu will stay there
Click to expand...
Click to collapse
Thank you very much, YoungAll.
You were really very kind and extremely helpful.
In the coming days I will try the guide you posted to me.
Until next time :good::fingers-crossed:
Hi everyone,
Today I tried unlocking the bootloader on my Lenovo Z6 Pro to root my phone but I've hit a dead end.
I've enabled OEM unlocking and USB debugging on the developer options before using "adb reboot bootloader". I managed to get to bootloader mode alright, but neither "fastboot flashing unlock" nor "fastboot oem unlock-go" works; I always get "remote: flashing unlock is not allowed" or "remote: oem unlock is not allowed".
This makes it seem like I didn't enable OEM unlocking before, but I made sure it was enabled. Any ideas how I might solve this?
Hi,
First you have to get the sn.img file for unlocking your bootloader from the zui website. Reboot to bootloader, first flash the img file and then enter the command for unlocking. As far as I have tried, you have to use this image file every time you need to unlock the bootloader(if you have locked it)
Good luck
Sayi Keshkar said:
Hi,
First you have to get the sn.img file for unlocking your bootloader from the zui website. Reboot to bootloader, first flash the img file and then enter the command for unlocking. As far as I have tried, you have to use this image file every time you need to unlock the bootloader(if you have locked it)
Good luck
Click to expand...
Click to collapse
Thanks for the reply. I gave up rooting my device for a while but I got tired of my phone bugging all the time so decided to give it another shot. This time I have another problem and it's driving me crazy: ADB wouldn't detect my phone when it's connected so I still can't unlock my bootloader. I tried installing every driver I could find but nothing works, but I can transfer files through explorer just fine. It occured to me that the USB might be the problem but it's the exact same one I used the last time I tried rooting it and I didn't have this problem back then.
Ill try explaining it clearly
Yesterday I decided to go back to the stock firmware by flashing it and choosing the option to "clean and lock the bootloader" for the Redmi 3s MIUI 10.2. However I got many problems when going through my phone. First, Wifi and hotspot wont work, the message "device storage is corrupted, your device is unsafe" keeps showing up and lastly, i cannot connect to the MI account as it'll show the message "Couldn't check device security info".
This makes my phone unusable, so my choice is to flash a new firmware, if i don't unlock the bootloader the message "critical partition flashing is not allowed" will show up when flashing the firmware. So I need to unlock the bootloader.
The first one is the Mi unlock tool. This unlocks the device by signing into the MI account, which i can't because it'll show the message "Couldn't check device security info" again. This means that I can't use the Mi unlock tool.
The second one is the ADB and fastboot method. When booted to fastboot, i typed in "fastboot oem unlock" but the error shows and says "token verification failed" error and just reboots into fastboot again.
This then leaves me into nowhere to how to unlock my bootloader. Please help and thank you so much!
Redmi 3s 3/32gb Completely Bricked. No Edl, No Fastboot ...https://xiaomi.eu › ... › Xiaomi Redmi 3S / 3X
you have to cross wires on usb cable to view in flash image orignal// this will bypass