Database Users

Partition problems, no ERI, Unknown IMEI, no USB

I was attempting to troubleshoot another phone I had and it was suggested somewhere on here that I back up my efs partition and gave directions to use the command "reboot nvbackup". Well the result was not good. I've searched the forums for over a week and have decided to finally post as I'm out of ideas.
I followed radionerd's thread here and was able to get the Baseband back but I still do not have anything in "Hardware Version", and show "0" in PRL version, "None" in ERI version, "Unknown" in IMEI. The kicker is that somehow my USB no longer works when connecting to the PC. The cord works fine with other phones and it charges this phone but gives a "USB device is not recognized" error when connecting, under device manager it shows up as "Device Descriptor Request Failed".
I have been able to flash back to a stock ROM using TWRP (RUEOF1 is what I've been flashing) but that hasn't helped at all. I've attempted to copy mmcblk1 from the sd but it always fails, both from TWRP file manager and from the ES File Explorer. I'm guessing if I was able to flash a new PIT file I'd be good but I have no idea how to do that without having USB support. I do have working WIFI and SD card access, along with a good operating system.
I've tried a lot of stuff over the past week so I apologize if I haven't already mentioned it but I'm looking for help to see if anyone has an idea about what can be done.
Thanks!

If you unlocked your bootloader using the "standard method" then the "debrick" image you created on the SD card has a backup of literally every partition EXCEPT the ones that you would normally flash with Odin (or a ROM, e.g. boot, system, userdata, cache etc).
The reason that that unlocking method created a debrick image is so that people could save it so they would have it for emergencies. Such as the one you created.
Even the PIT data is included in a hidden partition inside the debrick image. But having a PIT file only allows you to re-partition flash memory, which you don't need; it's partitioned already. Re-writing the PIT is not going to magically recreate data inside those partitions that you erased.
Here's the bottom line: factory images, just like ROM files have NEVER had 100% of the partitions needed to restore the phone back to working condition. So there's darn good reasons to have backups or avoid wiping all of memory.
I think that @hsbadr had posted some debrick images taken during older ROM releases (N* series, I think) on his AFH (androidfilehost.com) site. Whether or not substituting some subset of those partitions (e.g. efs, persist, etc) onto your device will work correctly or not, but it's certainly worth a try at this point.
Skills you need to learn: figuring out byte offsets from the GPT partition table at the beginning of the debrick file to get the partition offsets in the "debrick" blob, and "dd" command options for grabbing exactly the byte ranges you want out of a single large blob file containing many partitions. (e.g. "skip=", "bs=", "count=").
Note also that the Unix GPT partitioning tools "gdisk" will let you examine the Primary GPT (UEFI?) partition table in the debrick image even though the secondary GPT is not present. That way, you can figure out the exact length and initial offset of partitions that you want to copy out of the debrick image into your device. (The reason for the missing secondary GPT is that the GPT/UEFI partition table indicates the presence of very large partitions such as /system, /cache, and /userdata, and the secondary GPT is always near the very end of the disk. Because the "debrick" image is literally a byte-for-byte copy of only the first 256 MB of the mmcblk0 flash device, there is no secondary GPT some 32GB "later" then the beginning of the debrick image.
red indicates partitions in debrick not appearing in Odin factory Images
Code:
$ gdisk /tmp/mj7-debrick-unlocked.img
Command (? for help): p
Disk /tmp/mj7-debrick-unlocked.img: 524288 sectors, 256.0 MiB
Logical sector size: 512 bytes
Disk identifier (GUID): NNNNNNNN-NNNN-NNNN-NNNN-NNNNNNNNNNNN
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 61071326
Partitions will be aligned on 2-sector boundaries
Total free space is 8158 sectors (4.0 MiB)
Number Start (sector) End (sector) Size Code Name
1 8192 38911 15.0 MiB 8300 apnhlos
2 38912 156543 57.4 MiB 0700 modem
3 156544 157567 512.0 KiB FFFF sbl1
4 157568 157631 32.0 KiB FFFF dbi
5 157632 157695 32.0 KiB FFFF ddr
6 157696 161791 2.0 MiB FFFF aboot
7 161792 162815 512.0 KiB FFFF rpm
8 162816 163839 512.0 KiB FFFF tz
[color=red] 9 163840 184319 10.0 MiB FFFF pad
10 184320 204799 10.0 MiB 8300 param
11 204800 233471 14.0 MiB 8300 efs
12 233472 239615 3.0 MiB FFFF modemst1
13 239616 245759 3.0 MiB FFFF modemst2[/color]
14 245760 268287 11.0 MiB FFFF boot
15 268288 294911 13.0 MiB FFFF recovery
[color=red] 16 294912 321535 13.0 MiB FFFF fota
17 321536 335853 7.0 MiB 8300 backup
18 335854 341997 3.0 MiB FFFF fsg
19 341998 341999 1024 bytes FFFF fsc
20 342000 342015 8.0 KiB FFFF ssd
21 342016 358399 8.0 MiB 8300 persist
22 358400 376831 9.0 MiB 8300 persdata [/color]
--------- debrick image ends ~72 MB into the start of the system partition --------
23 376832 5931007 2.6 GiB 8300 system
24 5931008 8028159 1024.0 MiB 8300 cache
25 8028160 61071326 25.3 GiB 8300 userdata
I would start by restoring as few partitions are necessary e.g. "efs" and "persist" before I would bother with the others.
Example using data given above. (You should check your own work.)
efs partition: blocks 204800 to 233471 in debrick image, blocks are 512 bytes.
check length:
(233471-204800+1)*512 = 14680064
14680064 / (1024 * 1024) = 14 O.K.
so:
# dd if=/sdcard/debrick.img bs=512 skip=204800 count=28672 of=/dev/block/platform/msm_sdcc.1/by-name/efs
(or get clever and faster)
# dd if=/sdcard/debrick.img bs=1048576 skip=100 count=14 of=/dev/block/platform/msm_sdcc.1/by-name/efs
You should be pretty sure what you are doing with byte offset calculations with the "dd" command. Fortunately you are relying on the partitioning already present on the output side of things, so the worst that you could do is write misaligned garbage to a partition. So long as you don't do something incredibly stupid like overwrite a bootloader partition you should be OK.
cheers

Thanks for the reply, I forgot to subscribe so I just saw the post.
I have been able to copy all of the partitions from another phone but it hasn't helped. I'm now wondering if I'm missing a hidden partition.

LG V20 9008 Error

I screwed up my V20.
Now the only thing the device manager sees is Qualcomm HS-USB QDLoader 9008.
Anybody know a fix?

bump
---------- Post added at 07:58 PM ---------- Previous post was at 07:52 PM ----------
looks like we just need board diag settings for the lg boardiag tool here https://forum.xda-developers.com/android/development/guide-fixing-hard-bricks-t3403868

For now, only LG can fix that. If your phone is still under warranty with your carrier, or with LG -- send it back. When I was starting off with the V20 before I understood that they used UFS memory now, and had updated protected boot, I bricked one phone twice, and another on purpose (to test something), and LG fixed both phones all three times.
-- Brian

Yeah. I ended up shipping it to them.
Already had an overheating issue so they didn't even check to see what was going on. They just replaced the mobo.
Thank you for the reply though.

Do you mind me asking what you did to get the 9008?
-- Brian

No not at all.
Let's see...If I remember right I was flashing firmware in LG UP and LG UP froze the device. And without thinking about it I pulled the battery and caused it not to install anything.
I have a H910 variant so there was no KDZ for it. So I had flashed the H910PR originally and it worked but I wanted root back so I was trying to flash I think either the H915 or H918. Pretty sure H915 KDZ.

H915 flashes fine on the H910 (only way to root it now). The H918 uses a different RSA key, so if you flash any other model's KDZ onto the H918, or the H918 KDZ onto any other model, it will have the wrong RSA key, and go into 9008 mode.
The other possibility, is that depending on which H910PR KDZ you flashed, it may have incremented the ARB (anti-rollback) version. If you then flashed the H915 KDZ, it may have had a lower ARB. If you flash firmware that has a lower ARB than what is on your phone, it also goes into 9008 mode.
-- Brian

Huh. Thank for that info.
Speaking of that I saw your H910M root and it worked but I ran into issues with LineageOS so I ended up forced to go back to stock and in doing so had to update to the SW:H91010p. Build:NRD90M.
I still have the dump from the root process though.
ARB is 0 you think I could flash it back to the H910M?

Yep! You can flash any firmware for a given model as long as the ARB is the same version or greater. ARB gets burned into QFPROM the first time XBL loads. So if you flash firmware that has a greater ARB, and your phone boots, you are now stuck on that ARB version. The H910 is ARB 0 for 10p, so you are fine flashing 10m.
-- Brian

Awesome. I'm doing a dumb just in case something goes awry.
Thank you.

runningnak3d said:
Do you mind me asking what you did to get the 9008?
-- Brian
Click to expand...
Click to collapse
I was shipping mine to them for a couple other issues, and was rooted with TWRP running the latest firmware on H918. I wanted to flash stock firmware to undo the root and TWRP so they wouldn't know it had been modified, but I also wanted to put it on an earlier firmware so I could root it again when I got it back, I was gonna tell them not to update the FW. Long story short I guess anti roll back was tripped despite the root and TWRP so LGUP wouldnt flash older firmware. I thought I'd be slick and flash the bootloader to an older one from twrp and see if LGUP would flash it then. Nope. Total brick. This is the first time I have ever full on bricked a device in over 10 years of modifying phones starting with windows mobile.

kdz extract for linux sd card write done
command link https://mega.nz/#!cJ9WUAiA!TSt9L5G3C...n8vx0pQ9ToxCFw
https://forum.xda-developers.com/g4/...-qfil-t3748946
[[email protected] ~]$ sudo dmesg -c >> /dev/null
[sudo] password for android:
[[email protected] ~]$ dmesg
[13324.923241] usb 1-2: new full-speed USB device number 11 using ohci-pci
[13325.594494] usb 1-2: config 1 interface 0 altsetting 0 endpoint 0x81 has invalid maxpacket 512, setting to 64
[13325.594499] usb 1-2: config 1 interface 0 altsetting 0 endpoint 0x2 has invalid maxpacket 512, setting to 64
[13325.618041] usb-storage 1-2:1.0: USB Mass Storage device detected
[13325.634811] scsi host3: usb-storage 1-2:1.0
[13326.672238] scsi 3:0:0:0: Direct-Access Mass Storage Device 1.00 PQ: 0 ANSI: 0 CCS
[13326.695215] sd 3:0:0:0: [sdb] 61857792 512-byte logical blocks: (31.7 GB/29.5 GiB)
[13326.707634] sd 3:0:0:0: [sdb] Write Protect is off
[13326.707636] sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00
[13326.722615] sd 3:0:0:0: [sdb] No Caching mode page found
[13326.722617] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[13326.802629] sdb: sdb1
[13326.859174] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[[email protected] ~]$ sudo fdisk -l /dev/sdb
Disk /dev/sdb: 29.5 GiB, 31671189504 bytes, 61857792 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00000000
Device Boot Start End Sectors Size Id Type
/dev/sdb1 8192 61857791 61849600 29.5G c W95 FAT32 (LBA)
[[email protected] ~]$ cd /home/android/21y/
[[email protected] 21y]$ sudo -s
[fwul 21y]# dd if=PrimaryGPT.bin of=/dev/sdb
32768+0 records in
32768+0 records out
16777216 bytes (17 MB, 16 MiB) copied, 43.9727 s, 382 kB/s
[fwul 21y]# sync
[fwul 21y]# ls -la /dev/disk/by-partlabel/sbl1
lrwxrwxrwx 1 root root 10 May 3 09:17 /dev/disk/by-partlabel/sbl1 -> ../../sdb3
[fwul 21y]# cd /home/android/21y/
[fwul 21y]# sudo -s
[fwul 21y]# for i in $(ls *.bin |egrep -v "(GPT|userdata)");do echo dd if=$i of=/dev/disk/by-partlabel/${i/\.bin};done
dd if=abootbak.bin of=/dev/disk/by-partlabel/abootbak
dd if=aboot.bin of=/dev/disk/by-partlabel/aboot
dd if=apdp.bin of=/dev/disk/by-partlabel/apdp
dd if=boot.bin of=/dev/disk/by-partlabel/boot
dd if=factory.bin of=/dev/disk/by-partlabel/factory
dd if=felica.bin of=/dev/disk/by-partlabel/felica
dd if=hypbak.bin of=/dev/disk/by-partlabel/hypbak
dd if=hyp.bin of=/dev/disk/by-partlabel/hyp
dd if=laf.bin of=/dev/disk/by-partlabel/laf
dd if=modem.bin of=/dev/disk/by-partlabel/modem
dd if=msadp.bin of=/dev/disk/by-partlabel/msadp
dd if=persist.bin of=/dev/disk/by-partlabel/persist
dd if=pmicbak.bin of=/dev/disk/by-partlabel/pmicbak
dd if=pmic.bin of=/dev/disk/by-partlabel/pmic
dd if=raw_resourcesbak.bin of=/dev/disk/by-partlabel/raw_resourcesbak
dd if=raw_resources.bin of=/dev/disk/by-partlabel/raw_resources
dd if=recovery.bin of=/dev/disk/by-partlabel/recovery
dd if=rpmbak.bin of=/dev/disk/by-partlabel/rpmbak
dd if=rpm.bin of=/dev/disk/by-partlabel/rpm
dd if=sbl1bak.bin of=/dev/disk/by-partlabel/sbl1bak
dd if=sbl1.bin of=/dev/disk/by-partlabel/sbl1
dd if=sdibak.bin of=/dev/disk/by-partlabel/sdibak
dd if=sdi.bin of=/dev/disk/by-partlabel/sdi
dd if=sec.bin of=/dev/disk/by-partlabel/sec
dd if=system_691200.bin of=/dev/disk/by-partlabel/system_691200
dd if=tzbak.bin of=/dev/disk/by-partlabel/tzbak
dd if=tz.bin of=/dev/disk/by-partlabel/tz
[fwul 21y]# for i in $(ls *.bin |egrep -v "(GPT|userdata)");do dd if=$i of=/dev/disk/by-partlabel/${i/\.bin};done
4096+0 records in
4096+0 records out
2097152 bytes (2.1 MB, 2.0 MiB) copied, 4.99972 s, 419 kB/s
4096+0 records in
4096+0 records out
2097152 bytes (2.1 MB, 2.0 MiB) copied, 5.16635 s, 406 kB/s
1024+0 records in
1024+0 records out
524288 bytes (524 kB, 512 KiB) copied, 1.42203 s, 369 kB/s
81920+0 records in
81920+0 records out
41943040 bytes (42 MB, 40 MiB) copied, 136.39 s, 308 kB/s
94208+0 records in
94208+0 records out
48234496 bytes (48 MB, 46 MiB) copied, 118.618 s, 407 kB/s
16384+0 records in
16384+0 records out
8388608 bytes (8.4 MB, 8.0 MiB) copied, 20.8579 s, 402 kB/s
1024+0 records in
1024+0 records out
524288 bytes (524 kB, 512 KiB) copied, 1.41575 s, 370 kB/s
1024+0 records in
1024+0 records out
524288 bytes (524 kB, 512 KiB) copied, 1.36919 s, 383 kB/s
98304+0 records in
98304+0 records out
50331648 bytes (50 MB, 48 MiB) copied, 121.167 s, 415 kB/s
176128+0 records in
176128+0 records out
90177536 bytes (90 MB, 86 MiB) copied, 219.763 s, 410 kB/s
1024+0 records in
1024+0 records out
524288 bytes (524 kB, 512 KiB) copied, 1.57476 s, 333 kB/s
65536+0 records in
65536+0 records out
33554432 bytes (34 MB, 32 MiB) copied, 82.7691 s, 405 kB/s
1024+0 records in
1024+0 records out
524288 bytes (524 kB, 512 KiB) copied, 1.48758 s, 352 kB/s
1024+0 records in
1024+0 records out
524288 bytes (524 kB, 512 KiB) copied, 1.36699 s, 384 kB/s
8192+0 records in
8192+0 records out
4194304 bytes (4.2 MB, 4.0 MiB) copied, 10.0502 s, 417 kB/s
8192+0 records in
8192+0 records out
4194304 bytes (4.2 MB, 4.0 MiB) copied, 10.0968 s, 415 kB/s
81920+0 records in
81920+0 records out
41943040 bytes (42 MB, 40 MiB) copied, 103.158 s, 407 kB/s
1024+0 records in
1024+0 records out
524288 bytes (524 kB, 512 KiB) copied, 1.43053 s, 366 kB/s
1024+0 records in
1024+0 records out
524288 bytes (524 kB, 512 KiB) copied, 1.37484 s, 381 kB/s
2048+0 records in
2048+0 records out
1048576 bytes (1.0 MB, 1.0 MiB) copied, 2.61353 s, 401 kB/s
2048+0 records in
2048+0 records out
1048576 bytes (1.0 MB, 1.0 MiB) copied, 2.616 s, 401 kB/s
1024+0 records in
1024+0 records out
524288 bytes (524 kB, 512 KiB) copied, 1.38069 s, 380 kB/s
1024+0 records in
1024+0 records out
524288 bytes (524 kB, 512 KiB) copied, 1.35592 s, 387 kB/s
1024+0 records in
1024+0 records out
524288 bytes (524 kB, 512 KiB) copied, 1.37754 s, 381 kB/s
884736+0 records in
884736+0 records out
452984832 bytes (453 MB, 432 MiB) copied, 26.0372 s, 17.4 MB/s
2048+0 records in
2048+0 records out
1048576 bytes (1.0 MB, 1.0 MiB) copied, 2.63721 s, 398 kB/s
2048+0 records in
2048+0 records out
1048576 bytes (1.0 MB, 1.0 MiB) copied, 2.6402 s, 397 kB/s
[fwul 21y]#

aaya888 said:
kdz extract for linux sd card write done
command link https://mega.nz/#!cJ9WUAiA!TSt9L5G3C...n8vx0pQ9ToxCFw
https://forum.xda-developers.com/g4/...-qfil-t3748946
[[email protected] ~]$ sudo dmesg -c >> /dev/null
[sudo] password for android:
[[email protected] ~]$ dmesg
[13324.923241] usb 1-2: new full-speed USB device number 11 using ohci-pci
Why are you posting this in multiple threads?, zip it up and upload it somewhere, no one wants to scroll through that crap
Sent from my LG-H910 using XDA Labs
Click to expand...
Click to collapse

@aaya888 Dude, that is for creating a bootable SD card for the G4. The G4 uses eMMC NAND. It is NOT possible to create a bootable SD card for a phone that uses UFS NAND (like the G5, V20, G6, V30, G7).
Let me rephrase that. It is not possible without a firehose. With a firehose, you can change the bootpath to /dev/block/mmcblk0. However, if you have a firehose, then you don't need a bootable SD card to unbrick your phone.
-- Brian

runningnak3d said:
@aaya888 Dude, that is for creating a bootable SD card for the G4. The G4 uses eMMC NAND. It is NOT possible to create a bootable SD card for a phone that uses UFS NAND (like the G5, V20, G6, V30, G7).
Let me rephrase that. It is not possible without a firehose. With a firehose, you can change the bootpath to /dev/block/mmcblk0. However, if you have a firehose, then you don't need a bootable SD card to unbrick your phone.
-- Brian
Click to expand...
Click to collapse
https://mega.nz/#!UJk1HYRQ!SMufYIICHn1mC5UuzGJafKPVc4_IiV-Bf8Xp8T6oD-M
[email protected]:~/Downloads$ cd kdz
[email protected]:~/Downloads/kdz$ ls
abootbak.bin eksst.bin mksdcard recovery.bin
aboot.bin encrypt.bin modem.bin reserve.bin
apdp.bin factory.bin modemst1.bin rpmbak.bin
boot.bin fota.bin modemst2.bin rpm.bin
cdt.bin fsc.bin mpt.bin sd.img
cmnlib64bak.bin fsg.bin msadp.bin sec.bin
cmnlib64.bin hypbak.bin -o sns.bin
cmnlibbak.bin hyp.bin op.bin spare1.bin
cmnlib.bin -i partitions.txt spare2.bin
ddr.bin keymasterbak.bin persist.bin system.bin
devcfgbak.bin keymaster.bin pmicbak.elf tzbak.bin
devcfg.bin keystore.bin pmic.elf tz.bin
devinfo.bin lafbak.bin raw_resourcesbak.bin xbl2bak.elf
dip.bin laf.bin raw_resources.bin xbl2.elf
dpo.bin misc.bin rct.bin xblbak.elf
drm.bin mkgpt recoverybak.bin xbl.elf
[email protected]:~/Downloads/kdz$ sudo ./mksdcard -g -o f800l.img -p partitions.txt -i lk_sdrescue/build-msm8996 -i bootloaders-sdboot
[sudo] password for aaya:
=== Entry: name: laf, size: 49152, align: , type: 98523EC6-90FE-4C67-B50A-0FC59ED6F56D, format: , file: laf.bin
=== Entry: name: mpt, size: 49152, align: , type: EBD0A0A2-B9E5-4433-87C0-68B6B72699C7, format: , file: mpt.bin
=== Entry: name: drm, size: 12288, align: , type: EBD0A0A2-B9E5-4433-87C0-68B6B72699C7, format: , file: drm.bin
=== Entry: name: sns, size: 8192, align: , type: EBD0A0A2-B9E5-4433-87C0-68B6B72699C7, format: , file: sns.bin
=== Entry: name: misc, size: 49152, align: , type: 82ACC91F-357C-4A68-9C8F-689E1B1A23A1, format: , file: misc.bin
=== Entry: name: factory, size: 16384, align: , type: 20117F86-E985-4357-B9EE-374BC1D8487D, format: , file: factory.bin
=== Entry: name: encrypt, size: 1024, align: , type: 323EF595-AF7A-4AFA-8060-97BE72841BB9, format: , file: encrypt.bin
=== Entry: name: eksst, size: 1024, align: , type: 45864011-CF89-46E6-A445-85262E065604, format: , file: eksst.bin
=== Entry: name: rct, size: 64, align: , type: 8ED8AE95-597F-4C8A-A5BD-A7FF8E4DFAA9, format: , file: rct.bin
=== Entry: name: ssd, size: 1024, align: , type: 2C86E742-745E-4FDD-BFD8-B6A7AC638772, format: , file: ssd.bin
=== Entry: name: keystore, size: 1024, align: , type: DE7D4029-0F5B-41C8-AE7E-F6C023A02B33, format: , file: keystore.bin
=== Entry: name: persist, size: 32768, align: , type: 6C95E238-E343-4BA8-B489-8681ED22AD0B, format: , file: persist.bin
=== Entry: name: lafbak, size: 49152, align: , type: E0B10BE8-8B5F-46D0-BC9A-A629CC3E063D, format: , file: laf.bin
=== Entry: name: system, size: 1024, align: , type: 97D7B011-54DA-4835-B3C4-917AD6E73D74, format: , file: system.bin
=== Entry: name: cache, size: 1024, align: , type: 5594C694-C871-4B5F-90B1-690A6F68E0F7, format: , file: cache.bin
=== Entry: name: cust, size: 1024, align: , type: EBD0A0A2-B9E5-4433-87C0-68B6B72699C7, format: , file: cust.bin
=== Entry: name: op, size: 1024, align: , type: EBD0A0A2-B9E5-4433-87C0-68B6B72699C7, format: , file: op.bin
=== Entry: name: userdata, size: 1024, align: , type: 1B81E7E6-F50D-419B-A739-2AEEF8DA3335, format: , file: userdata.bin
=== Entry: name: grow, size: 4096, align: , type: EBD0A0A2-B9E5-4433-87C0-68B6B72699C7, format: , file: grow.bin
=== Entry: name: xbl, size: 2048, align: , type: DEA0BA2C-CBDD-4805-B4F9-F428251C3E98, format: , file: xbl.bin
=== Entry: name: xblbak, size: 2048, align: , type: DF24E5ED-8C96-4B86-B00B-79667DC6DE11, format: , file: xbl.bin
=== Entry: name: fota, size: 4096, align: , type: 86A7CB80-84E1-408C-99AB-694F1A410FC7, format: , file: fota.bin
=== Entry: name: fsg, size: 2048, align: , type: 638FF8E2-22C9-E33B-8F5D-0E81686A68CB, format: , file: fsg.bin
=== Entry: name: dip, size: 1024, align: , type: 4114B077-005D-4E12-AC8C-B493BDA684FB, format: , file: dip.bin
=== Entry: name: devinfo, size: 1024, align: , type: 65ADDCF4-0C5C-4D9A-AC2D-D90B5CBFCD03, format: , file: devinfo.bin
=== Entry: name: grow2, size: 4096, align: , type: EBD0A0A2-B9E5-4433-87C0-68B6B72699C7, format: , file: grow2.bin
=== Entry: name: xbl2, size: 2048, align: , type: DEA0BA2C-CBDD-4805-B4F9-F428251C3E98, format: , file: xbl.bin
=== Entry: name: xbl2bak, size: 2048, align: , type: DF24E5ED-8C96-4B86-B00B-79667DC6DE11, format: , file: xbl.bin
=== Entry: name: grow3, size: 4096, align: , type: EBD0A0A2-B9E5-4433-87C0-68B6B72699C7, format: , file: grow3.bin
=== Entry: name: ddr, size: 2048, align: , type: 20A0C19C-286A-42FA-9CE7-F64C3226A794, format: , file: ddr.bin
=== Entry: name: reserve, size: 64, align: , type: 7A37A18E-48F0-BCA5-935E-5795DBB57FF8, format: , file: reserve.bin
=== Entry: name: cdt, size: 8, align: , type: A19F205F-CCD8-4B6D-8F1E-2D9BC24CFFB1, format: , file: cdt.bin
=== Entry: name: spare1, size: 4096, align: , type: 7EFE5010-2A1A-4A1A-B8BC-990257813512, format: , file: spare1.bin
=== Entry: name: grow4, size: 4096, align: , type: EBD0A0A2-B9E5-4433-87C0-68B6B72699C7, format: , file: grow4.bin
=== Entry: name: boot, size: 32768, align: , type: 20117F86-E985-4357-B9EE-374BC1D8487D, format: , file: boot.bin
=== Entry: name: recovery, size: 32768, align: , type: 9D72D4E4-9958-42DA-AC26-BEA7A90B0434, format: , file: recovery.bin
=== Entry: name: recoverybak, size: 32768, align: , type: DF24E5ED-8C96-4B86-B00B-79667DC6DE11, format: , file: recovery.bin
=== Entry: name: tz, size: 2048, align: , type: A053AA7F-40B8-4B1C-BA08-2F68AC71A4F4, format: , file: tz.bin
=== Entry: name: tzbak, size: 2048, align: , type: E6C8667F-8044-44A7-B1D9-BEFE88AAD86C, format: , file: tz.bin
=== Entry: name: aboot, size: 2048, align: , type: 400FFDCD-22E0-47E7-9A23-F16ED9382388, format: , file: aboot.bin
=== Entry: name: abootbak, size: 2048, align: , type: C993E3DF-FE66-49C9-8D8D-7C681C4DCAE9, format: , file: aboot.bin
=== Entry: name: raw_resources, size: 4096, align: , type: 4627AE27-CFEF-48A1-88FE-99C3509ADE26, format: , file: raw_resources.bin
=== Entry: name: raw_resourcesbak, size: 4096, align: , type: C1DAB2CF-697D-4665-B43D-00BA47487528, format: , file: raw_resources.bin
=== Entry: name: rpm, size: 256, align: , type: 098DF793-D712-413D-9D4E-89D711772228, format: , file: rpm.bin
=== Entry: name: rpmbak, size: 256, align: , type: 680CA584-238C-4E0F-8438-15F43257A055, format: , file: rpm.bin
=== Entry: name: hyp, size: 384, align: , type: E1A6A689-0C8D-4CC6-B4E8-55A4320FBD8A, format: , file: hyp.bin
=== Entry: name: hypbak, size: 384, align: , type: 24C03326-2523-4E03-8C5E-B07ED7A44CD9, format: , file: hyp.bin
=== Entry: name: pmic, size: 64, align: , type: C00EEF24-7709-43D6-9799-DD2B411E7A3C, format: , file: pmic.bin
=== Entry: name: pmicbak, size: 64, align: , type: 4E646DCC-29E2-459A-B7C5-618E6F3AD76A, format: , file: pmic.bin
=== Entry: name: devcfg, size: 64, align: , type: F65D4B16-343D-4E25-AAFC-BE99B6556A6D, format: , file: devcfg.bin
=== Entry: name: devcfgbak, size: 64, align: , type: 10A0C19C-516A-5444-5CE3-664C3226A794, format: , file: devcfg.bin
=== Entry: name: modem, size: 98304, align: , type: EBD0A0A2-B9E5-4433-87C0-68B6B72699C7, format: , file: modem.bin
=== Entry: name: sec, size: 16, align: , type: 303E6AC3-AF15-4C54-9E9B-D9A8FBECF401, format: , file: sec.bin
=== Entry: name: keymaster, size: 384, align: , type: 4F772165-0F3C-4BA3-BBCB-A829E9C969F9, format: , file: keymaster.bin
=== Entry: name: keymasterbak, size: 384, align: , type: 7C29D3AD-78B9-452E-9DEB-D098D542F092, format: , file: keymaster.bin
=== Entry: name: cmnlib, size: 384, align: , type: 73471795-AB54-43F9-A847-4F72EA5CBEF5, format: , file: cmnlib.bin
=== Entry: name: cmnlibbak, size: 384, align: , type: 7C29D3AD-78B9-452E-9DEB-D098D542F092, format: , file: cmnlib.bin
=== Entry: name: cmnlib64, size: 384, align: , type: 8EA64893-1267-4A1B-947C-7C362ACAAD2C, format: , file: cmnlib64.bin
=== Entry: name: cmnlib64bak, size: 384, align: , type: 379D107E-229E-499D-AD4F-61F5BCF87BD4, format: , file: cmnlib64.bin
=== Entry: name: apdp, size: 64, align: , type: E6E98DA2-E22A-4D12-AB33-169E7DEAA507, format: , file: apdp.bin
=== Entry: name: msadp, size: 64, align: , type: ED9E8101-05FA-46B7-82AA-8D58770D200B, format: , file: msadp.bin
=== Entry: name: dpo, size: 1024, align: , type: 11406F35-1173-4869-807B-27DF71802812, format: , file: dpo.bin
=== Entry: name: grow5, size: 4096, align: , type: EBD0A0A2-B9E5-4433-87C0-68B6B72699C7, format: , file: grow5.bin
=== Entry: name: modemst1, size: 2048, align: , type: EBBEADAF-22C9-E33B-8F5D-0E81686A68CB, format: , file: modemst1.bin
=== Entry: name: modemst2, size: 2048, align: , type: 0A288B1F-22C9-E33B-8F5D-0E81686A68CB, format: , file: modemst2.bin
=== Entry: name: fsc, size: 1024, align: , type: 57B90A16-22C9-E33B-8F5D-0E81686A68CB, format: , file: fsc.bin
=== Entry: name: spare2, size: 4096, align: , type: 40270447-93EC-4805-9779-83A3AE37CFF0, format: , file: spare2.bin
=== Entry: name: grow6, size: 4096, align: , type: EBD0A0A2-B9E5-4433-87C0-68B6B72699C7, format: , file: grow6.bin
=== Entry: name: persistent, size: 4096, align: , type: EBD0A0A2-B9E5-4433-87C0-68B6B72699C7, format: , file: persistent.bin
=== Entry: name: grow7, size: 4096, align: , type: EBD0A0A2-B9E5-4433-87C0-68B6B72699C7, format: , file: grow7.bin
=== Create file with size (kb): 559145
=== Create image file: f800l.img
1+0 records in
1+0 records out
1024 bytes (1,0 kB, 1,0 KiB) copied, 0,0229406 s, 44,6 kB/s
=== Create part: name:laf, size:49152, type:98523EC6-90FE-4C67-B50A-0FC59ED6F56D, align:, format:, file:
Creating new GPT entries.
Setting name!
partNum is 0
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:mpt, size:49152, type:EBD0A0A2-B9E5-4433-87C0-68B6B72699C7, align:, format:, file:
Setting name!
partNum is 1
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:drm, size:12288, type:EBD0A0A2-B9E5-4433-87C0-68B6B72699C7, align:, format:, file:
Setting name!
partNum is 2
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:sns, size:8192, type:EBD0A0A2-B9E5-4433-87C0-68B6B72699C7, align:, format:, file:
Setting name!
partNum is 3
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:misc, size:49152, type:82ACC91F-357C-4A68-9C8F-689E1B1A23A1, align:, format:, file:
Setting name!
partNum is 4
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:factory, size:16384, type:20117F86-E985-4357-B9EE-374BC1D8487D, align:, format:, file:
Setting name!
partNum is 5
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:encrypt, size:1024, type:323EF595-AF7A-4AFA-8060-97BE72841BB9, align:, format:, file:
Setting name!
partNum is 6
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:eksst, size:1024, type:45864011-CF89-46E6-A445-85262E065604, align:, format:, file:
Setting name!
partNum is 7
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:rct, size:64, type:8ED8AE95-597F-4C8A-A5BD-A7FF8E4DFAA9, align:, format:, file:
Setting name!
partNum is 8
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:ssd, size:1024, type:2C86E742-745E-4FDD-BFD8-B6A7AC638772, align:, format:, file:
Setting name!
partNum is 9
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:keystore, size:1024, typeE7D4029-0F5B-41C8-AE7E-F6C023A02B33, align:, format:, file:
Setting name!
partNum is 10

REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: nameersist, size:32768, type:6C95E238-E343-4BA8-B489-8681ED22AD0B, align:, format:, file:
Setting name!
partNum is 11
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:lafbak, size:49152, type:E0B10BE8-8B5F-46D0-BC9A-A629CC3E063D, align:, format:, file:
Setting name!
partNum is 12
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:system, size:1024, type:97D7B011-54DA-4835-B3C4-917AD6E73D74, align:, format:, file:
Setting name!
partNum is 13
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:cache, size:1024, type:5594C694-C871-4B5F-90B1-690A6F68E0F7, align:, format:, file:
Setting name!
partNum is 14
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:cust, size:1024, type:EBD0A0A2-B9E5-4433-87C0-68B6B72699C7, align:, format:, file:
Setting name!
partNum is 15
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: namep, size:1024, type:EBD0A0A2-B9E5-4433-87C0-68B6B72699C7, align:, format:, file:
Setting name!
partNum is 16
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:userdata, size:1024, type:1B81E7E6-F50D-419B-A739-2AEEF8DA3335, align:, format:, file:
Setting name!
partNum is 17
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:grow, size:4096, type:EBD0A0A2-B9E5-4433-87C0-68B6B72699C7, align:, format:, file:
Setting name!
partNum is 18
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:xbl, size:2048, typeEA0BA2C-CBDD-4805-B4F9-F428251C3E98, align:, format:, file:
Setting name!
partNum is 19
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:xblbak, size:2048, typeF24E5ED-8C96-4B86-B00B-79667DC6DE11, align:, format:, file:
Setting name!
partNum is 20
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:fota, size:4096, type:86A7CB80-84E1-408C-99AB-694F1A410FC7, align:, format:, file:
Setting name!
partNum is 21
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:fsg, size:2048, type:638FF8E2-22C9-E33B-8F5D-0E81686A68CB, align:, format:, file:
Setting name!
partNum is 22
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:dip, size:1024, type:4114B077-005D-4E12-AC8C-B493BDA684FB, align:, format:, file:
Setting name!
partNum is 23
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:devinfo, size:1024, type:65ADDCF4-0C5C-4D9A-AC2D-D90B5CBFCD03, align:, format:, file:
Setting name!
partNum is 24
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:grow2, size:4096, type:EBD0A0A2-B9E5-4433-87C0-68B6B72699C7, align:, format:, file:
Setting name!
partNum is 25
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:xbl2, size:2048, typeEA0BA2C-CBDD-4805-B4F9-F428251C3E98, align:, format:, file:
Setting name!
partNum is 26
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:xbl2bak, size:2048, typeF24E5ED-8C96-4B86-B00B-79667DC6DE11, align:, format:, file:
Setting name!
partNum is 27
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:grow3, size:4096, type:EBD0A0A2-B9E5-4433-87C0-68B6B72699C7, align:, format:, file:
Setting name!
partNum is 28
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:ddr, size:2048, type:20A0C19C-286A-42FA-9CE7-F64C3226A794, align:, format:, file:
Setting name!
partNum is 29
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:reserve, size:64, type:7A37A18E-48F0-BCA5-935E-5795DBB57FF8, align:, format:, file:
Setting name!
partNum is 30
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:cdt, size:8, type:A19F205F-CCD8-4B6D-8F1E-2D9BC24CFFB1, align:, format:, file:
Setting name!
partNum is 31
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:spare1, size:4096, type:7EFE5010-2A1A-4A1A-B8BC-990257813512, align:, format:, file:
Setting name!
partNum is 32
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:grow4, size:4096, type:EBD0A0A2-B9E5-4433-87C0-68B6B72699C7, align:, format:, file:
Setting name!
partNum is 33
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:boot, size:32768, type:20117F86-E985-4357-B9EE-374BC1D8487D, align:, format:, file:
Setting name!
partNum is 34
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:recovery, size:32768, type:9D72D4E4-9958-42DA-AC26-BEA7A90B0434, align:, format:, file:
Setting name!
partNum is 35
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:recoverybak, size:32768, typeF24E5ED-8C96-4B86-B00B-79667DC6DE11, align:, format:, file:
Setting name!
partNum is 36
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:tz, size:2048, type:A053AA7F-40B8-4B1C-BA08-2F68AC71A4F4, align:, format:, file:
Setting name!
partNum is 37
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:tzbak, size:2048, type:E6C8667F-8044-44A7-B1D9-BEFE88AAD86C, align:, format:, file:
Setting name!
partNum is 38
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:aboot, size:2048, type:400FFDCD-22E0-47E7-9A23-F16ED9382388, align:, format:, file:
Setting name!
partNum is 39
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:abootbak, size:2048, type:C993E3DF-FE66-49C9-8D8D-7C681C4DCAE9, align:, format:, file:
Setting name!
partNum is 40
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:raw_resources, size:4096, type:4627AE27-CFEF-48A1-88FE-99C3509ADE26, align:, format:, file:
Setting name!
partNum is 41
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:raw_resourcesbak, size:4096, type:C1DAB2CF-697D-4665-B43D-00BA47487528, align:, format:, file:
Setting name!
partNum is 42
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:rpm, size:256, type:098DF793-D712-413D-9D4E-89D711772228, align:, format:, file:
Setting name!
partNum is 43
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:rpmbak, size:256, type:680CA584-238C-4E0F-8438-15F43257A055, align:, format:, file:
Setting name!
partNum is 44
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:hyp, size:384, type:E1A6A689-0C8D-4CC6-B4E8-55A4320FBD8A, align:, format:, file:
Setting name!
partNum is 45
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:hypbak, size:384, type:24C03326-2523-4E03-8C5E-B07ED7A44CD9, align:, format:, file:
Setting name!
partNum is 46
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: namemic, size:64, type:C00EEF24-7709-43D6-9799-DD2B411E7A3C, align:, format:, file:
Setting name!
partNum is 47
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: namemicbak, size:64, type:4E646DCC-29E2-459A-B7C5-618E6F3AD76A, align:, format:, file:
Setting name!
partNum is 48
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:devcfg, size:64, type:F65D4B16-343D-4E25-AAFC-BE99B6556A6D, align:, format:, file:
Setting name!
partNum is 49
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:devcfgbak, size:64, type:10A0C19C-516A-5444-5CE3-664C3226A794, align:, format:, file:
Setting name!
partNum is 50
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:modem, size:98304, type:EBD0A0A2-B9E5-4433-87C0-68B6B72699C7, align:, format:, file:
Setting name!
partNum is 51
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:sec, size:16, type:303E6AC3-AF15-4C54-9E9B-D9A8FBECF401, align:, format:, file:
Setting name!
partNum is 52
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:keymaster, size:384, type:4F772165-0F3C-4BA3-BBCB-A829E9C969F9, align:, format:, file:
Setting name!
partNum is 53
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:keymasterbak, size:384, type:7C29D3AD-78B9-452E-9DEB-D098D542F092, align:, format:, file:
Setting name!
partNum is 54
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:cmnlib, size:384, type:73471795-AB54-43F9-A847-4F72EA5CBEF5, align:, format:, file:
Setting name!
partNum is 55
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:cmnlibbak, size:384, type:7C29D3AD-78B9-452E-9DEB-D098D542F092, align:, format:, file:
Setting name!
partNum is 56
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:cmnlib64, size:384, type:8EA64893-1267-4A1B-947C-7C362ACAAD2C, align:, format:, file:
Setting name!
partNum is 57
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:cmnlib64bak, size:384, type:379D107E-229E-499D-AD4F-61F5BCF87BD4, align:, format:, file:
Setting name!
partNum is 58
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:apdp, size:64, type:E6E98DA2-E22A-4D12-AB33-169E7DEAA507, align:, format:, file:
Setting name!
partNum is 59
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:msadp, size:64, type:ED9E8101-05FA-46B7-82AA-8D58770D200B, align:, format:, file:
Setting name!
partNum is 60
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:dpo, size:1024, type:11406F35-1173-4869-807B-27DF71802812, align:, format:, file:
Setting name!
partNum is 61
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:grow5, size:4096, type:EBD0A0A2-B9E5-4433-87C0-68B6B72699C7, align:, format:, file:
Setting name!
partNum is 62
REALLY setting name!
---------- Post added at 06:29 AM ---------- Previous post was at 06:28 AM ----------
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:modemst1, size:2048, type:EBBEADAF-22C9-E33B-8F5D-0E81686A68CB, align:, format:, file:
Setting name!
partNum is 63
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:modemst2, size:2048, type:0A288B1F-22C9-E33B-8F5D-0E81686A68CB, align:, format:, file:
Setting name!
partNum is 64
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:fsc, size:1024, type:57B90A16-22C9-E33B-8F5D-0E81686A68CB, align:, format:, file:
Setting name!
partNum is 65
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:spare2, size:4096, type:40270447-93EC-4805-9779-83A3AE37CFF0, align:, format:, file:
Setting name!
partNum is 66
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:grow6, size:4096, type:EBD0A0A2-B9E5-4433-87C0-68B6B72699C7, align:, format:, file:
Setting name!
partNum is 67
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: nameersistent, size:4096, type:EBD0A0A2-B9E5-4433-87C0-68B6B72699C7, align:, format:, file:
Setting name!
partNum is 68
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
=== Create part: name:grow7, size:4096, type:EBD0A0A2-B9E5-4433-87C0-68B6B72699C7, align:, format:, file:
Setting name!
partNum is 69
REALLY setting name!
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
[email protected]:~/Downloads/kdz$ sudo parted f800l.img print
Model: (file)
Disk /home/aaya/Downloads/kdz/f800l.img: 573MB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:
Number Start End Size File system Name Flags
1 17,4kB 50,3MB 50,3MB laf
2 50,3MB 101MB 50,3MB mpt msftdata
3 101MB 113MB 12,6MB drm msftdata
4 113MB 122MB 8389kB sns msftdata
5 122MB 172MB 50,3MB misc
6 172MB 189MB 16,8MB factory
7 189MB 190MB 1049kB encrypt
8 190MB 191MB 1049kB eksst
9 191MB 191MB 65,5kB rct
10 191MB 192MB 1049kB ssd
11 192MB 193MB 1049kB keystore
12 193MB 227MB 33,6MB persist
13 227MB 277MB 50,3MB lafbak
14 277MB 278MB 1049kB system
15 278MB 279MB 1049kB cache
16 279MB 280MB 1049kB cust msftdata
17 280MB 281MB 1049kB op msftdata
18 281MB 282MB 1049kB userdata
19 282MB 286MB 4194kB grow msftdata
20 286MB 288MB 2097kB xbl
21 288MB 291MB 2097kB xblbak
22 291MB 295MB 4194kB fota
23 295MB 297MB 2097kB fsg
24 297MB 298MB 1049kB dip
25 298MB 299MB 1049kB devinfo
26 299MB 303MB 4194kB grow2 msftdata
27 303MB 305MB 2097kB xbl2
28 305MB 307MB 2097kB xbl2bak
29 307MB 312MB 4194kB grow3 msftdata
30 312MB 314MB 2097kB ddr
31 314MB 314MB 65,5kB reserve
32 314MB 314MB 8192B cdt
33 314MB 318MB 4194kB spare1
34 318MB 322MB 4194kB grow4 msftdata
35 322MB 356MB 33,6MB boot
36 356MB 389MB 33,6MB recovery
37 389MB 423MB 33,6MB recoverybak
38 423MB 425MB 2097kB tz
39 425MB 427MB 2097kB tzbak
40 427MB 429MB 2097kB aboot
41 429MB 431MB 2097kB abootbak
42 431MB 435MB 4194kB raw_resources
43 435MB 440MB 4194kB raw_resourcesbak
44 440MB 440MB 262kB rpm
45 440MB 440MB 262kB rpmbak
46 440MB 440MB 393kB hyp
47 440MB 441MB 393kB hypbak
48 441MB 441MB 65,5kB pmic
49 441MB 441MB 65,5kB pmicbak
50 441MB 441MB 65,5kB devcfg
51 441MB 441MB 65,5kB devcfgbak
52 441MB 542MB 101MB modem msftdata
53 542MB 542MB 16,4kB sec
54 542MB 542MB 393kB keymaster
55 542MB 543MB 393kB keymasterbak
56 543MB 543MB 393kB cmnlib
57 543MB 543MB 393kB cmnlibbak
58 543MB 544MB 393kB cmnlib64
59 544MB 544MB 393kB cmnlib64bak
60 544MB 544MB 65,5kB apdp
61 544MB 544MB 65,5kB msadp
62 544MB 545MB 1049kB dpo
63 545MB 549MB 4194kB grow5 msftdata
64 549MB 552MB 2097kB modemst1
65 552MB 554MB 2097kB modemst2
66 554MB 555MB 1049kB fsc
67 555MB 559MB 4194kB spare2
68 559MB 563MB 4194kB grow6 msftdata
69 563MB 567MB 4194kB persistent msftdata
70 567MB 572MB 4194kB grow7 msftdata
[email protected]:~/Downloads/kdz$ sudo dmesg -c >> /dev/null
[email protected]:~/Downloads/kdz$ dmesg
[email protected]:~/Downloads/kdz$ sudo fdisk -l /dev/sdb
Disk /dev/sdb: 58,4 GiB, 62730010624 bytes, 122519552 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00000000
Device Boot Start End Sectors Size Id Type
/dev/sdb1 * 2048 122519551 122517504 58,4G c W95 FAT32 (LBA)
[email protected]:~/Downloads/kdz$ cd kdz
bash: cd: kdz: No such file or directory
[email protected]:~/Downloads/kdz$ sudo -s
[email protected]:~/Downloads/kdz# dd if=f800l.img of=/dev/sdb
1118290+0 records in
1118290+0 records out
572564480 bytes (573 MB, 546 MiB) copied, 160,036 s, 3,6 MB/s
[email protected]:~/Downloads/kdz# sync
[email protected]:~/Downloads/kdz# ls -la /dev/disk/by-partlabel
total 1935116
drwxr-xr-x 2 root root 1160 Луу 27 13:17 .
drwxr-xr-x 8 root root 160 Луу 27 07:19 ..
-rw-r--r-- 1 root root 2097152 Луу 27 13:14 aboot
-rw-r--r-- 1 root root 2097152 Луу 27 13:14 abootbak
-rw-r--r-- 1 root root 524288 Луу 27 13:14 apdp
-rw-r--r-- 1 root root 41943040 Луу 27 13:14 boot
-rw-r--r-- 1 root root 4096 Луу 27 13:14 cdt
-rw-r--r-- 1 root root 524288 Луу 27 13:14 cmnlib
-rw-r--r-- 1 root root 524288 Луу 27 13:14 cmnlib64
-rw-r--r-- 1 root root 524288 Луу 27 13:14 cmnlib64bak
-rw-r--r-- 1 root root 524288 Луу 27 13:14 cmnlibbak
-rw-r--r-- 1 root root 2097152 Луу 27 13:14 ddr
-rw-r--r-- 1 root root 131072 Луу 27 13:14 devcfg
-rw-r--r-- 1 root root 131072 Луу 27 13:14 devcfgbak
-rw-r--r-- 1 root root 1048576 Луу 27 13:14 devinfo
-rw-r--r-- 1 root root 1048576 Луу 27 13:14 dip
-rw-r--r-- 1 root root 524288 Луу 27 13:14 dpo
-rw-r--r-- 1 root root 10485760 Луу 27 13:14 drm
-rw-r--r-- 1 root root 524288 Луу 27 13:14 eksst
-rw-r--r-- 1 root root 524288 Луу 27 13:14 encrypt
-rw-r--r-- 1 root root 69206016 Луу 27 13:14 factory
-rw-r--r-- 1 root root 4194304 Луу 27 13:14 fota
-rw-r--r-- 1 root root 524288 Луу 27 13:14 fsc
-rw-r--r-- 1 root root 2097152 Луу 27 13:14 fsg
-rw-r--r-- 1 root root 17920 Луу 27 13:14 gpt
-rw-r--r-- 1 root root 34304 Луу 27 13:14 gpt_both0
-rw-r--r-- 1 root root 524288 Луу 27 13:14 hyp
-rw-r--r-- 1 root root 524288 Луу 27 13:14 hypbak
-rw-r--r-- 1 root root 524288 Луу 27 13:14 keymaster
-rw-r--r-- 1 root root 524288 Луу 27 13:14 keymasterbak
-rw-r--r-- 1 root root 524288 Луу 27 13:14 keystore
-rw-r--r-- 1 root root 50331648 Луу 27 13:14 lafbak
-rw-r--r-- 1 root root 21757952 Луу 27 13:14 misc
-rw-r--r-- 1 root root 0 Луу 27 13:14 modem
-rw-r--r-- 1 root root 2097152 Луу 27 13:14 modemst1
-rw-r--r-- 1 root root 2097152 Луу 27 13:14 modemst2
-rw-r--r-- 1 root root 0 Луу 27 13:14 mpt
-rw-r--r-- 1 root root 0 Луу 27 13:14 msadp
-rw-r--r-- 1 root root 33554432 Луу 27 13:14 persist
-rw-r--r-- 1 root root 0 Луу 27 13:14 raw_resources
-rw-r--r-- 1 root root 0 Луу 27 13:14 raw_resourcesbak
-rw-r--r-- 1 root root 524288 Луу 27 13:14 rct
-rw-r--r-- 1 root root 0 Луу 27 13:14 recovery
-rw-r--r-- 1 root root 0 Луу 27 13:14 recoverybak
-rw-r--r-- 1 root root 32768 Луу 27 13:14 reserve
-rw-r--r-- 1 root root 0 Луу 27 13:14 rpm
-rw-r--r-- 1 root root 0 Луу 27 13:14 rpmbak
-rw-r--r-- 1 root root 0 Луу 27 13:14 sec
-rw-r--r-- 1 root root 0 Луу 27 13:14 sns
-rw-r--r-- 1 root root 4194304 Луу 27 13:14 spare1
-rw-r--r-- 1 root root 2097152 Луу 27 13:17 spare2
-rw-r--r-- 1 root root 1720893440 Луу 27 13:15 system
lrwxrwxrwx 1 root root 10 Луу 27 10:52 Test\x20Partition -> ../../sda4
-rw-r--r-- 1 root root 0 Луу 27 13:15 tz
-rw-r--r-- 1 root root 0 Луу 27 13:15 tzbak
-rw-r--r-- 1 root root 0 Луу 27 08:07 xbl2
-rw-r--r-- 1 root root 0 Луу 27 08:07 xbl2bak
-rw-r--r-- 1 root root 0 Луу 27 08:07 xblbak

[email protected]:~/Downloads/kdz#
[email protected]:~/Downloads/kdz# for i in $(ls *.bin |egrep -v "(GPT|userdata)");do echo dd if=$i of=/dev/disk/by-partlabel/${i/\.bin};done
dd if=abootbak.bin of=/dev/disk/by-partlabel/abootbak
dd if=aboot.bin of=/dev/disk/by-partlabel/aboot
dd if=apdp.bin of=/dev/disk/by-partlabel/apdp
dd if=boot.bin of=/dev/disk/by-partlabel/boot
dd if=cdt.bin of=/dev/disk/by-partlabel/cdt
dd if=cmnlib64bak.bin of=/dev/disk/by-partlabel/cmnlib64bak
dd if=cmnlib64.bin of=/dev/disk/by-partlabel/cmnlib64
dd if=cmnlibbak.bin of=/dev/disk/by-partlabel/cmnlibbak
dd if=cmnlib.bin of=/dev/disk/by-partlabel/cmnlib
dd if=ddr.bin of=/dev/disk/by-partlabel/ddr
dd if=devcfgbak.bin of=/dev/disk/by-partlabel/devcfgbak
dd if=devcfg.bin of=/dev/disk/by-partlabel/devcfg
dd if=devinfo.bin of=/dev/disk/by-partlabel/devinfo
dd if=dip.bin of=/dev/disk/by-partlabel/dip
dd if=dpo.bin of=/dev/disk/by-partlabel/dpo
dd if=drm.bin of=/dev/disk/by-partlabel/drm
dd if=eksst.bin of=/dev/disk/by-partlabel/eksst
dd if=encrypt.bin of=/dev/disk/by-partlabel/encrypt
dd if=factory.bin of=/dev/disk/by-partlabel/factory
dd if=fota.bin of=/dev/disk/by-partlabel/fota
dd if=fsc.bin of=/dev/disk/by-partlabel/fsc
dd if=fsg.bin of=/dev/disk/by-partlabel/fsg
dd if=hypbak.bin of=/dev/disk/by-partlabel/hypbak
dd if=hyp.bin of=/dev/disk/by-partlabel/hyp
dd if=keymasterbak.bin of=/dev/disk/by-partlabel/keymasterbak
dd if=keymaster.bin of=/dev/disk/by-partlabel/keymaster
dd if=keystore.bin of=/dev/disk/by-partlabel/keystore
dd if=lafbak.bin of=/dev/disk/by-partlabel/lafbak
dd if=laf.bin of=/dev/disk/by-partlabel/laf
dd if=misc.bin of=/dev/disk/by-partlabel/misc
dd if=modem.bin of=/dev/disk/by-partlabel/modem
dd if=modemst1.bin of=/dev/disk/by-partlabel/modemst1
dd if=modemst2.bin of=/dev/disk/by-partlabel/modemst2
dd if=mpt.bin of=/dev/disk/by-partlabel/mpt
dd if=msadp.bin of=/dev/disk/by-partlabel/msadp
dd if=op.bin of=/dev/disk/by-partlabel/op
dd if=persist.bin of=/dev/disk/by-partlabel/persist
dd if=raw_resourcesbak.bin of=/dev/disk/by-partlabel/raw_resourcesbak
dd if=raw_resources.bin of=/dev/disk/by-partlabel/raw_resources
dd if=rct.bin of=/dev/disk/by-partlabel/rct
dd if=recoverybak.bin of=/dev/disk/by-partlabel/recoverybak
dd if=recovery.bin of=/dev/disk/by-partlabel/recovery
dd if=reserve.bin of=/dev/disk/by-partlabel/reserve
dd if=rpmbak.bin of=/dev/disk/by-partlabel/rpmbak
dd if=rpm.bin of=/dev/disk/by-partlabel/rpm
dd if=sec.bin of=/dev/disk/by-partlabel/sec
dd if=sns.bin of=/dev/disk/by-partlabel/sns
dd if=spare1.bin of=/dev/disk/by-partlabel/spare1
dd if=spare2.bin of=/dev/disk/by-partlabel/spare2
dd if=system.bin of=/dev/disk/by-partlabel/system
dd if=tzbak.bin of=/dev/disk/by-partlabel/tzbak
dd if=tz.bin of=/dev/disk/by-partlabel/tz
[email protected]:~/Downloads/kdz# for i in $(ls *.bin |egrep -v "(GPT|userdata)");do dd if=$i of=/dev/disk/by-partlabel/${i/\.bin};done
4096+0 records in
4096+0 records out
2097152 bytes (2,1 MB, 2,0 MiB) copied, 0,0643486 s, 32,6 MB/s
4096+0 records in
4096+0 records out
2097152 bytes (2,1 MB, 2,0 MiB) copied, 0,0526737 s, 39,8 MB/s
1024+0 records in
1024+0 records out
524288 bytes (524 kB, 512 KiB) copied, 0,0249284 s, 21,0 MB/s
81920+0 records in
81920+0 records out
41943040 bytes (42 MB, 40 MiB) copied, 0,770998 s, 54,4 MB/s
8+0 records in
8+0 records out
4096 bytes (4,1 kB, 4,0 KiB) copied, 0,000361113 s, 11,3 MB/s
1024+0 records in
1024+0 records out
524288 bytes (524 kB, 512 KiB) copied, 0,023943 s, 21,9 MB/s
1024+0 records in
1024+0 records out
524288 bytes (524 kB, 512 KiB) copied, 0,0197682 s, 26,5 MB/s
1024+0 records in
1024+0 records out
524288 bytes (524 kB, 512 KiB) copied, 0,0210129 s, 25,0 MB/s
1024+0 records in
1024+0 records out
524288 bytes (524 kB, 512 KiB) copied, 0,0205953 s, 25,5 MB/s
4096+0 records in
4096+0 records out
2097152 bytes (2,1 MB, 2,0 MiB) copied, 0,0528205 s, 39,7 MB/s
256+0 records in
256+0 records out
131072 bytes (131 kB, 128 KiB) copied, 0,0161039 s, 8,1 MB/s
256+0 records in
256+0 records out
131072 bytes (131 kB, 128 KiB) copied, 0,00298831 s, 43,9 MB/s
2048+0 records in
2048+0 records out
1048576 bytes (1,0 MB, 1,0 MiB) copied, 0,0283786 s, 36,9 MB/s
2048+0 records in
2048+0 records out
1048576 bytes (1,0 MB, 1,0 MiB) copied, 0,0326182 s, 32,1 MB/s
1024+0 records in
1024+0 records out
524288 bytes (524 kB, 512 KiB) copied, 0,0400563 s, 13,1 MB/s
20480+0 records in
20480+0 records out
10485760 bytes (10 MB, 10 MiB) copied, 0,22146 s, 47,3 MB/s
1024+0 records in
1024+0 records out
524288 bytes (524 kB, 512 KiB) copied, 0,00814724 s, 64,4 MB/s
1024+0 records in
1024+0 records out
524288 bytes (524 kB, 512 KiB) copied, 0,0052311 s, 100 MB/s
135168+0 records in
135168+0 records out
69206016 bytes (69 MB, 66 MiB) copied, 1,38552 s, 49,9 MB/s
8192+0 records in
8192+0 records out
4194304 bytes (4,2 MB, 4,0 MiB) copied, 0,106935 s, 39,2 MB/s
1024+0 records in
1024+0 records out
524288 bytes (524 kB, 512 KiB) copied, 0,00975353 s, 53,8 MB/s
4096+0 records in
4096+0 records out
2097152 bytes (2,1 MB, 2,0 MiB) copied, 0,0546581 s, 38,4 MB/s
1024+0 records in
1024+0 records out
524288 bytes (524 kB, 512 KiB) copied, 0,0183304 s, 28,6 MB/s
1024+0 records in
1024+0 records out
524288 bytes (524 kB, 512 KiB) copied, 0,0188219 s, 27,9 MB/s
1024+0 records in
1024+0 records out
524288 bytes (524 kB, 512 KiB) copied, 0,113713 s, 4,6 MB/s
1024+0 records in
1024+0 records out
524288 bytes (524 kB, 512 KiB) copied, 0,00687672 s, 76,2 MB/s
1024+0 records in
1024+0 records out
524288 bytes (524 kB, 512 KiB) copied, 0,00577225 s, 90,8 MB/s
98304+0 records in
98304+0 records out
50331648 bytes (50 MB, 48 MiB) copied, 1,08353 s, 46,5 MB/s
dd: writing to '/dev/disk/by-partlabel/laf': No space left on device
1+0 records in
0+0 records out
0 bytes copied, 0,00924235 s, 0,0 kB/s
dd: writing to '/dev/disk/by-partlabel/misc': No space left on device
42497+0 records in
42496+0 records out
21757952 bytes (22 MB, 21 MiB) copied, 0,403093 s, 54,0 MB/s
dd: writing to '/dev/disk/by-partlabel/modem': No space left on device
1+0 records in
0+0 records out
0 bytes copied, 0,0290838 s, 0,0 kB/s
4096+0 records in
4096+0 records out
2097152 bytes (2,1 MB, 2,0 MiB) copied, 0,0590141 s, 35,5 MB/s
4096+0 records in
4096+0 records out
2097152 bytes (2,1 MB, 2,0 MiB) copied, 0,0569646 s, 36,8 MB/s
dd: writing to '/dev/disk/by-partlabel/mpt': No space left on device
1+0 records in
0+0 records out
0 bytes copied, 0,0378504 s, 0,0 kB/s
dd: writing to '/dev/disk/by-partlabel/msadp': No space left on device
1+0 records in
0+0 records out
0 bytes copied, 0,0192231 s, 0,0 kB/s
dd: writing to '/dev/disk/by-partlabel/op': No space left on device
1+0 records in
0+0 records out
0 bytes copied, 0,0228324 s, 0,0 kB/s
65536+0 records in
65536+0 records out
33554432 bytes (34 MB, 32 MiB) copied, 0,617191 s, 54,4 MB/s
dd: writing to '/dev/disk/by-partlabel/raw_resourcesbak': No space left on device
1+0 records in
0+0 records out
0 bytes copied, 0,0215163 s, 0,0 kB/s
dd: writing to '/dev/disk/by-partlabel/raw_resources': No space left on device
1+0 records in
0+0 records out
0 bytes copied, 0,00581143 s, 0,0 kB/s
1024+0 records in
1024+0 records out
524288 bytes (524 kB, 512 KiB) copied, 0,0158591 s, 33,1 MB/s
dd: writing to '/dev/disk/by-partlabel/recoverybak': No space left on device
1+0 records in
0+0 records out
0 bytes copied, 0,0129297 s, 0,0 kB/s
dd: writing to '/dev/disk/by-partlabel/recovery': No space left on device
1+0 records in
0+0 records out
0 bytes copied, 0,00115132 s, 0,0 kB/s
64+0 records in
64+0 records out
32768 bytes (33 kB, 32 KiB) copied, 0,016151 s, 2,0 MB/s
dd: writing to '/dev/disk/by-partlabel/rpmbak': No space left on device
1+0 records in
0+0 records out
0 bytes copied, 0,0118379 s, 0,0 kB/s
dd: writing to '/dev/disk/by-partlabel/rpm': No space left on device
1+0 records in
0+0 records out
0 bytes copied, 0,00103714 s, 0,0 kB/s
dd: writing to '/dev/disk/by-partlabel/sec': No space left on device
1+0 records in
0+0 records out
0 bytes copied, 0,00582426 s, 0,0 kB/s
dd: writing to '/dev/disk/by-partlabel/sns': No space left on device
1+0 records in
0+0 records out
0 bytes copied, 0,00913119 s, 0,0 kB/s
8192+0 records in
8192+0 records out
4194304 bytes (4,2 MB, 4,0 MiB) copied, 0,103569 s, 40,5 MB/s
4096+0 records in
4096+0 records out
2097152 bytes (2,1 MB, 2,0 MiB) copied, 0,0530615 s, 39,5 MB/s
dd: writing to '/dev/disk/by-partlabel/system': No space left on device
3361121+0 records in
3361120+0 records out
1720893440 bytes (1,7 GB, 1,6 GiB) copied, 31,5384 s, 54,6 MB/s
dd: writing to '/dev/disk/by-partlabel/tzbak': No space left on device
1+0 records in
0+0 records out
0 bytes copied, 0,0140009 s, 0,0 kB/s
dd: writing to '/dev/disk/by-partlabel/tz': No space left on device
1+0 records in
0+0 records out
0 bytes copied, 0,127579 s, 0,0 kB/s
[email protected]:~/Downloads/kdz# dd if=abootbak.bin of=/dev/disk/by-partlabel/abootbak
4096+0 records in
4096+0 records out
2097152 bytes (2,1 MB, 2,0 MiB) copied, 0,0562202 s, 37,3 MB/s
[email protected]:~/Downloads/kdz# dd if=aboot.bin of=/dev/disk/by-partlabel/aboot
4096+0 records in
4096+0 records out
2097152 bytes (2,1 MB, 2,0 MiB) copied, 0,0509847 s, 41,1 MB/s
[email protected]:~/Downloads/kdz# dd if=apdp.bin of=/dev/disk/by-partlabel/apdp
1024+0 records in
1024+0 records out
524288 bytes (524 kB, 512 KiB) copied, 0,0198957 s, 26,4 MB/s
[email protected]:~/Downloads/kdz# dd if=boot.bin of=/dev/disk/by-partlabel/boot
81920+0 records in
81920+0 records out
41943040 bytes (42 MB, 40 MiB) copied, 0,771567 s, 54,4 MB/s
[email protected]:~/Downloads/kdz# dd if=cache.bin of=/dev/disk/by-partlabel/cache
dd: failed to open 'cache.bin': No such file or directory
[email protected]:~/Downloads/kdz# dd if=cdt.bin of=/dev/disk/by-partlabel/cdt
8+0 records in
8+0 records out
4096 bytes (4,1 kB, 4,0 KiB) copied, 0,000216207 s, 18,9 MB/s
[email protected]:~/Downloads/kdz# dd if=cmnlib64bak.bin of=/dev/disk/by-partlabel/cmnlib64bak
1024+0 records in
1024+0 records out
524288 bytes (524 kB, 512 KiB) copied, 0,0289889 s, 18,1 MB/s
[email protected]:~/Downloads/kdz# dd if=cmnlib64.bin of=/dev/disk/by-partlabel/cmnlib64
1024+0 records in
1024+0 records out
524288 bytes (524 kB, 512 KiB) copied, 0,0250437 s, 20,9 MB/s
[email protected]:~/Downloads/kdz# dd if=cmnlibbak.bin of=/dev/disk/by-partlabel/cmnlibbak
1024+0 records in
1024+0 records out
524288 bytes (524 kB, 512 KiB) copied, 0,0177252 s, 29,6 MB/s
[email protected]:~/Downloads/kdz# dd if=cmnlib.bin of=/dev/disk/by-partlabel/cmnlib
1024+0 records in
1024+0 records out
524288 bytes (524 kB, 512 KiB) copied, 0,0159855 s, 32,8 MB/s
[email protected]:~/Downloads/kdz# dd if=ddr.bin of=/dev/disk/by-partlabel/ddr
4096+0 records in
4096+0 records out
2097152 bytes (2,1 MB, 2,0 MiB) copied, 0,0672052 s, 31,2 MB/s
[email protected]:~/Downloads/kdz# dd if=devcfgbak.bin of=/dev/disk/by-partlabel/devcfgbak
256+0 records in
256+0 records out
131072 bytes (131 kB, 128 KiB) copied, 0,00671658 s, 19,5 MB/s
[email protected]:~/Downloads/kdz# dd if=devcfg.bin of=/dev/disk/by-partlabel/devcfg
256+0 records in
256+0 records out
131072 bytes (131 kB, 128 KiB) copied, 0,0130537 s, 10,0 MB/s
[email protected]:~/Downloads/kdz# dd if=devinfo.bin of=/dev/disk/by-partlabel/devinfo
2048+0 records in
2048+0 records out
1048576 bytes (1,0 MB, 1,0 MiB) copied, 0,0344104 s, 30,5 MB/s
[email protected]:~/Downloads/kdz# dd if=dip.bin of=/dev/disk/by-partlabel/dip
2048+0 records in
2048+0 records out
1048576 bytes (1,0 MB, 1,0 MiB) copied, 0,0525063 s, 20,0 MB/s
[email protected]:~/Downloads/kdz# dd if=dpo.bin of=/dev/disk/by-partlabel/dpo
1024+0 records in
1024+0 records out
524288 bytes (524 kB, 512 KiB) copied, 0,0367111 s, 14,3 MB/s
[email protected]:~/Downloads/kdz# dd if=drm.bin of=/dev/disk/by-partlabel/drm
20480+0 records in
20480+0 records out
10485760 bytes (10 MB, 10 MiB) copied, 0,206695 s, 50,7 MB/s
[email protected]:~/Downloads/kdz# dd if=eksst.bin of=/dev/disk/by-partlabel/eksst
1024+0 records in
1024+0 records out
524288 bytes (524 kB, 512 KiB) copied, 0,00657176 s, 79,8 MB/s
[email protected]:~/Downloads/kdz# dd if=encrypt.bin of=/dev/disk/by-partlabel/encrypt
1024+0 records in
1024+0 records out
524288 bytes (524 kB, 512 KiB) copied, 0,00701394 s, 74,7 MB/s
[email protected]:~/Downloads/kdz# dd if=factory.bin of=/dev/disk/by-partlabel/factory
135168+0 records in
135168+0 records out
69206016 bytes (69 MB, 66 MiB) copied, 1,40961 s, 49,1 MB/s
[email protected]:~/Downloads/kdz# dd if=fota.bin of=/dev/disk/by-partlabel/fota
8192+0 records in
8192+0 records out
4194304 bytes (4,2 MB, 4,0 MiB) copied, 0,10445 s, 40,2 MB/s
[email protected]:~/Downloads/kdz# dd if=fsc.bin of=/dev/disk/by-partlabel/fsc
1024+0 records in
1024+0 records out
524288 bytes (524 kB, 512 KiB) copied, 0,00887572 s, 59,1 MB/s
[email protected]:~/Downloads/kdz# dd if=fsg.bin of=/dev/disk/by-partlabel/fsg
4096+0 records in
4096+0 records out
2097152 bytes (2,1 MB, 2,0 MiB) copied, 0,0509349 s, 41,2 MB/s
[email protected]:~/Downloads/kdz# dd if=grow2.bin of=/dev/disk/by-partlabel/grow2
dd: failed to open 'grow2.bin': No such file or directory
[email protected]:~/Downloads/kdz# dd if=grow3.bin of=/dev/disk/by-partlabel/grow3
dd: failed to open 'grow3.bin': No such file or directory
[email protected]:~/Downloads/kdz# dd if=grow4.bin of=/dev/disk/by-partlabel/grow4
dd: failed to open 'grow4.bin': No such file or directory
[email protected]:~/Downloads/kdz# dd if=grow5.bin of=/dev/disk/by-partlabel/grow5
dd: failed to open 'grow5.bin': No such file or directory
[email protected]:~/Downloads/kdz# dd if=grow6.bin of=/dev/disk/by-partlabel/grow6
dd: failed to open 'grow6.bin': No such file or directory
[email protected]:~/Downloads/kdz# dd if=grow.bin of=/dev/disk/by-partlabel/grow
dd: failed to open 'grow.bin': No such file or directory
[email protected]:~/Downloads/kdz# dd if=hypbak.bin of=/dev/disk/by-partlabel/hypbak
1024+0 records in
1024+0 records out
524288 bytes (524 kB, 512 KiB) copied, 0,0266637 s, 19,7 MB/s
[email protected]:~/Downloads/kdz# dd if=hyp.bin of=/dev/disk/by-partlabel/hyp
1024+0 records in
1024+0 records out
524288 bytes (524 kB, 512 KiB) copied, 0,0173174 s, 30,3 MB/s
[email protected]spire-E1-531:~/Downloads/kdz# dd if=keymasterbak.bin of=/dev/disk/by-partlabel/keymasterbak
1024+0 records in
1024+0 records out
524288 bytes (524 kB, 512 KiB) copied, 0,00618144 s, 84,8 MB/s
[email protected]:~/Downloads/kdz# dd if=keymaster.bin of=/dev/disk/by-partlabel/keymaster
1024+0 records in
1024+0 records out
524288 bytes (524 kB, 512 KiB) copied, 0,00514745 s, 102 MB/s
[email protected]:~/Downloads/kdz# dd if=keystore.bin of=/dev/disk/by-partlabel/keystore
1024+0 records in
1024+0 records out
524288 bytes (524 kB, 512 KiB) copied, 0,00609891 s, 86,0 MB/s
[email protected]:~/Downloads/kdz# dd if=lafbak.bin of=/dev/disk/by-partlabel/lafbak
98304+0 records in
98304+0 records out
50331648 bytes (50 MB, 48 MiB) copied, 0,911995 s, 55,2 MB/s
[email protected]:~/Downloads/kdz# dd if=laf.bin of=/dev/disk/by-partlabel/laf
dd: writing to '/dev/disk/by-partlabel/laf': No space left on device
1+0 records in
0+0 records out
0 bytes copied, 0,00618895 s, 0,0 kB/s
[email protected]:~/Downloads/kdz# dd if=misc.bin of=/dev/disk/by-partlabel/misc
dd: writing to '/dev/disk/by-partlabel/misc': No space left on device
42497+0 records in
42496+0 records out
21757952 bytes (22 MB, 21 MiB) copied, 0,410335 s, 53,0 MB/s
[email protected]:~/Downloads/kdz# dd if=modem.bin of=/dev/disk/by-partlabel/modem
dd: writing to '/dev/disk/by-partlabel/modem': No space left on device
1+0 records in
0+0 records out
0 bytes copied, 0,0249778 s, 0,0 kB/s
[email protected]:~/Downloads/kdz# dd if=modemst1.bin of=/dev/disk/by-partlabel/modemst1
4096+0 records in
4096+0 records out
2097152 bytes (2,1 MB, 2,0 MiB) copied, 0,0639324 s, 32,8 MB/s
[email protected]:~/Downloads/kdz# dd if=modemst2.bin of=/dev/disk/by-partlabel/modemst2
4096+0 records in
4096+0 records out
2097152 bytes (2,1 MB, 2,0 MiB) copied, 0,0402436 s, 52,1 MB/s
[email protected]:~/Downloads/kdz# dd if=mpt.bin of=/dev/disk/by-partlabel/mpt
dd: writing to '/dev/disk/by-partlabel/mpt': No space left on device
1+0 records in
0+0 records out
0 bytes copied, 0,0221325 s, 0,0 kB/s
[email protected]:~/Downloads/kdz# dd if=msadp.bin of=/dev/disk/by-partlabel/msadp
dd: writing to '/dev/disk/by-partlabel/msadp': No space left on device
1+0 records in
0+0 records out
0 bytes copied, 0,0142649 s, 0,0 kB/s
[email protected]:~/Downloads/kdz# dd if=persist.bin of=/dev/disk/by-partlabel/persist
65536+0 records in
65536+0 records out
33554432 bytes (34 MB, 32 MiB) copied, 0,621584 s, 54,0 MB/s
[email protected]:~/Downloads/kdz# dd if=pmicbak.bin of=/dev/disk/by-partlabel/pmicbak
dd: writing to '/dev/disk/by-partlabel/pmicbak': No space left on device
1+0 records in
0+0 records out
0 bytes copied, 0,000650274 s, 0,0 kB/s
[email protected]:~/Downloads/kdz# dd if=pmic.bin of=/dev/disk/by-partlabel/pmic
dd: writing to '/dev/disk/by-partlabel/pmic': No space left on device
1+0 records in
0+0 records out
0 bytes copied, 0,00025464 s, 0,0 kB/s
[email protected]:~/Downloads/kdz# dd if=raw_resourcesbak.bin of=/dev/disk/by-partlabel/raw_resourcesbak
dd: writing to '/dev/disk/by-partlabel/raw_resourcesbak': No space left on device
1+0 records in
0+0 records out
0 bytes copied, 0,0157091 s, 0,0 kB/s
[email protected]:~/Downloads/kdz# dd if=raw_resources.bin of=/dev/disk/by-partlabel/raw_resources
dd: writing to '/dev/disk/by-partlabel/raw_resources': No space left on device
1+0 records in
0+0 records out
0 bytes copied, 0,00922587 s, 0,0 kB/s
[email protected]:~/Downloads/kdz# dd if=rct.bin of=/dev/disk/by-partlabel/rct
1024+0 records in
1024+0 records out
524288 bytes (524 kB, 512 KiB) copied, 0,0247106 s, 21,2 MB/s
[email protected]:~/Downloads/kdz# dd if=recoverybak.bin of=/dev/disk/by-partlabel/recoverybak
dd: writing to '/dev/disk/by-partlabel/recoverybak': No space left on device
1+0 records in
0+0 records out
0 bytes copied, 0,0176765 s, 0,0 kB/s
[email protected]:~/Downloads/kdz# dd if=recovery.bin of=/dev/disk/by-partlabel/recovery
dd: writing to '/dev/disk/by-partlabel/recovery': No space left on device
1+0 records in
0+0 records out
0 bytes copied, 0,000869766 s, 0,0 kB/s
[email protected]:~/Downloads/kdz# dd if=reserve.bin of=/dev/disk/by-partlabel/reserve
64+0 records in
64+0 records out
32768 bytes (33 kB, 32 KiB) copied, 0,0476047 s, 688 kB/s
[email protected]:~/Downloads/kdz# dd if=rpmbak.bin of=/dev/disk/by-partlabel/rpmbak
dd: writing to '/dev/disk/by-partlabel/rpmbak': No space left on device
1+0 records in
0+0 records out
0 bytes copied, 0,00965593 s, 0,0 kB/s
[email protected]:~/Downloads/kdz# dd if=rpm.bin of=/dev/disk/by-partlabel/rpm
dd: writing to '/dev/disk/by-partlabel/rpm': No space left on device
1+0 records in
0+0 records out
0 bytes copied, 0,000823096 s, 0,0 kB/s
[email protected]:~/Downloads/kdz# dd if=sec.bin of=/dev/disk/by-partlabel/sec
dd: writing to '/dev/disk/by-partlabel/sec': No space left on device
1+0 records in
0+0 records out
0 bytes copied, 0,0037476 s, 0,0 kB/s
[email protected]:~/Downloads/kdz# dd if=sns.bin of=/dev/disk/by-partlabel/sns
dd: writing to '/dev/disk/by-partlabel/sns': No space left on device
1+0 records in
0+0 records out
0 bytes copied, 0,00548995 s, 0,0 kB/s
[email protected]:~/Downloads/kdz# dd if=spare1.bin of=/dev/disk/by-partlabel/spare1
8192+0 records in
8192+0 records out
4194304 bytes (4,2 MB, 4,0 MiB) copied, 0,102285 s, 41,0 MB/s
[email protected]:~/Downloads/kdz# dd if=spare2.bin of=/dev/disk/by-partlabel/spare2
4096+0 records in
4096+0 records out
2097152 bytes (2,1 MB, 2,0 MiB) copied, 0,0504355 s, 41,6 MB/s
[email protected]:~/Downloads/kdz# dd if=ssd.bin of=/dev/disk/by-partlabel/ssd
dd: failed to open 'ssd.bin': No such file or directory
[email protected]:~/Downloads/kdz# dd if=system.bin of=/dev/disk/by-partlabel/system
dd: writing to '/dev/disk/by-partlabel/system': No space left on device
3361121+0 records in
3361120+0 records out
1720893440 bytes (1,7 GB, 1,6 GiB) copied, 31,5257 s, 54,6 MB/s
[email protected]:~/Downloads/kdz# dd if=tzbak.bin of=/dev/disk/by-partlabel/tzbak
dd: writing to '/dev/disk/by-partlabel/tzbak': No space left on device
1+0 records in
0+0 records out
0 bytes copied, 0,000273897 s, 0,0 kB/s
[email protected]:~/Downloads/kdz# dd if=tz.bin of=/dev/disk/by-partlabel/tz
dd: writing to '/dev/disk/by-partlabel/tz': No space left on device
1+0 records in
0+0 records out
0 bytes copied, 0,000330047 s, 0,0 kB/s
[email protected]:~/Downloads/kdz# dd if=xbl2bak.bin of=/dev/disk/by-partlabel/xbl2bak
dd: writing to '/dev/disk/by-partlabel/xbl2bak': No space left on device
1+0 records in
0+0 records out
0 bytes copied, 0,000430381 s, 0,0 kB/s
[email protected]:~/Downloads/kdz# dd if=xbl2.bin of=/dev/disk/by-partlabel/xbl2
dd: writing to '/dev/disk/by-partlabel/xbl2': No space left on device
1+0 records in
0+0 records out
0 bytes copied, 0,000282129 s, 0,0 kB/s
[email protected]:~/Downloads/kdz# dd if=xblbak.bin of=/dev/disk/by-partlabel/xblbak
dd: writing to '/dev/disk/by-partlabel/xblbak': No space left on device
1+0 records in
0+0 records out
0 bytes copied, 0,000217358 s, 0,0 kB/s
[email protected]:~/Downloads/kdz# dd if=xbl.bin of=/dev/disk/by-partlabel/xbl
dd: writing to '/dev/disk/by-partlabel/xbl': No space left on device
1+0 records in
0+0 records out
0 bytes copied, 0,000417175 s, 0,0 kB/s
[email protected]:~/Downloads/kdz#

Mods need to ban this guy for posting this stuff in multiple threads after he was told previously not to.
Sent from my LG-H910 using XDA Labs

@cnjax I wish he wouldn't have posted this until we get Oreo, but since it is out there, he has almost figured out how to boot from an SD card. Also, the massive posts weren't needed, a link to pastebin would have sufficed.
This is the ultimate hole that LG can't patch (can't modify the PBL).
I won't post the proper way until we get Oreo (LG has wasted enough time trying to close holes), but if someone else wants to do a little work, this method will root the LS997, and the H932 V30.

runningnak3d said:
@cnjax I wish he wouldn't have posted this until we get Oreo, but since it is out there, he has almost figured out how to boot from an SD card. Also, the massive posts weren't needed, a link to pastebin would have sufficed.
This is the ultimate hole that LG can't patch (can't modify the PBL).
I won't post the proper way until we get Oreo (LG has wasted enough time trying to close holes), but if someone else wants to do a little work, this method will root the LS997, and the H932 V30.
Click to expand...
Click to collapse
It doesn't matter what he's almost figured out, there's no reason to post dumps on the forum in multiple places, he could simply post what he's done or figured out and if anyone wanted to see it, he could send it to them directly.
Sent from my LG-H910 using XDA Labs

Where is the BCT image on the TPT?

Can someone explain me how the TPT does the booting? According to the nvidia manual there should be a BCT image somewhere on the device, either in SPI or in eMMC but I can not find it. According to this post: https://forum.xda-developers.com/showthread.php?t=2318140 there should be 16 partitions, but it looks like I only have 10:
Code:
[email protected]:/ # cat /proc/partitions
major minor #blocks name
179 0 15387648 mmcblk0
179 1 6144 mmcblk0p1
179 2 8192 mmcblk0p2
179 3 786432 mmcblk0p3
179 4 921600 mmcblk0p4
179 5 2048 mmcblk0p5
179 6 524288 mmcblk0p6
179 7 20480 mmcblk0p7
259 0 143360 mmcblk0p8
259 1 20480 mmcblk0p9
259 2 12939264 mmcblk0p10
[email protected]:/ # ls -al /dev/block/platform/sdhci-tegra.3/by-name/
lrwxrwxrwx root root 2018-08-16 09:07 AP -> /dev/block/mmcblk0p3
lrwxrwxrwx root root 2018-08-16 09:07 CC -> /dev/block/mmcblk0p4
lrwxrwxrwx root root 2018-08-16 09:07 LX -> /dev/block/mmcblk0p2
lrwxrwxrwx root root 2018-08-16 09:07 MC -> /dev/block/mmcblk0p5
lrwxrwxrwx root root 2018-08-16 09:07 PA -> /dev/block/mmcblk0p6
lrwxrwxrwx root root 2018-08-16 09:07 SC -> /dev/block/mmcblk0p7
lrwxrwxrwx root root 2018-08-16 09:07 SS -> /dev/block/mmcblk0p1
lrwxrwxrwx root root 2018-08-16 09:07 UA -> /dev/block/mmcblk0p10
lrwxrwxrwx root root 2018-08-16 09:07 UP -> /dev/block/mmcblk0p8
As p1 is the recovery image and p2 is the kernel, I do not see any more partitions where the BCT image could be.
nvflash does not work on my device, as the APX mode is locked.
What I find a little bit worrying, is that fdisk says I have no partition table:
Code:
[email protected]:/ # fdisk -l mmcblk0
Disk mmcblk0: 15.7 GB, 15756951552 bytes
4 heads, 16 sectors/track, 480864 cylinders
Units = cylinders of 64 * 512 = 32768 bytes
Disk mmcblk0 doesn't contain a valid partition table
Should this command fail?
But there must be the configuration somewhere, right?
I have a TPT 1839-22G

I imaged now the whole eMMC using dd and found out that in difference to the posted partition table, the partitions BCT, PT, EBT and GP1 are missing. the Partitions SOS starts 0x100000 bytes earlier as given in the other thread.
Between 0x0 and 0x00d00000 I can find some non zero bytes but nothing which caught my attention.
Using gdisk I could restore the partition table:
Code:
GPT fdisk (gdisk) version 1.0.3
Unsupported GPT version in backup header; read 0x00000000, should be
0x00010000
Partition table scan:
MBR: not present
BSD: not present
APM: not present
GPT: not present
Creating new GPT entries.
Command (? for help): p
Disk mmcblk0.img: 30775296 sectors, 14.7 GiB
Sector size (logical): 512 bytes
Disk identifier (GUID): D3A36F54-6FB0-48C2-B599-DFD0D4E294BF
Partition table holds up to 128 entries
Main partition table begins at sector 2 and ends at sector 33
First usable sector is 34, last usable sector is 30775262
Partitions will be aligned on 2048-sector boundaries
Total free space is 30775229 sectors (14.7 GiB)
Number Start (sector) End (sector) Size Code Name
Command (? for help): r
Recovery/transformation command (? for help): b
Recovery/transformation command (? for help): p
Disk mmcblk0.img: 30775296 sectors, 14.7 GiB
Sector size (logical): 512 bytes
Disk identifier (GUID): D3A36F54-6FB0-48C2-B599-DFD0D4E294BF
Partition table holds up to 128 entries
Main partition table begins at sector 2 and ends at sector 33
First usable sector is 34, last usable sector is 30775262
Partitions will be aligned on 2048-sector boundaries
Total free space is 30775229 sectors (14.7 GiB)
Number Start (sector) End (sector) Size Code Name
Recovery/transformation command (? for help): c
Warning! This will probably do weird things if you've converted an MBR to
GPT form and haven't yet saved the GPT! Proceed? (Y/N): y
Caution! After loading partitions, the CRC doesn't check out!
Recovery/transformation command (? for help): p
Disk mmcblk0.img: 30775296 sectors, 14.7 GiB
Sector size (logical): 512 bytes
Disk identifier (GUID): D3A36F54-6FB0-48C2-B599-DFD0D4E294BF
Partition table holds up to 128 entries
Main partition table begins at sector 2 and ends at sector 33
First usable sector is 34, last usable sector is 30775262
Partitions will be aligned on 2048-sector boundaries
Total free space is 30653 sectors (15.0 MiB)
Number Start (sector) End (sector) Size Code Name
1 26624 38911 6.0 MiB 0700 体S
2 38912 55295 8.0 MiB 0700 乌X
3 55296 1628159 768.0 MiB 0700 偁P
4 1628160 3471359 900.0 MiB 0700 䅃C
5 3471360 3475455 2.0 MiB 0700 卍C
6 3475456 4524031 512.0 MiB 0700 䥐A
7 4524032 4564991 20.0 MiB 0700 䕓C
8 4564992 4851711 140.0 MiB 0700 单P
9 4851712 4892671 20.0 MiB 0700 䑐A
10 4892672 30771199 12.3 GiB 0700 䑕A
Which also shows, that there are no partitions before 0xd00000.
But where is the BCT stored then?

LG G2 bricked, partition table corrupt

Update:
Somehow, the phone came back, sort of (battery low?!), and I was able to see all partitions again.
So I tried fixing the problem by copying boot.img and laf.img to the respective partitions ... I guess you shouldn't try these things at 1:30 am after already getting yourself in a horrible mess, but here I am. Now the phone is stuck at the LG logo screen, the LED flashes green and blue, and nothing happens. All I can do is to push the power button, and the process repeats.
Naturally, I cannot see any partitions any longer. Now the device seems to be REALLY dead.
Anything I can still try?!
Original problem description
I have tried, after somehow messing things up when following the guide to install LineageOS on the LG G2 (d802, international version with 32 GB), to resurrect my phone using this guide.
However, it failed to solve my problem, and when I tried to boot, the phone still showed only the LG logo, the secure booting error, and then the screen went black, just as before. I guess I should have used dd as well to copy the boot, dbi and laf partitions.
Instead, I figured maybe I should try the TWRP Recovery v2.6.3.2 instead of either TWRP v2.8.7.3 or the LineageOS Recovery image, and that probably has been my (final) mistake. Because, before, the output from gdisk looked liked this:
Code:
Found valid GPT with protective MBR; using GPT.
Disk /dev/sdb: 61071360 sectors, 29.1 GiB
Model: MMC Storage
Sector size (logical/physical): 512/512 bytes
Disk identifier (GUID): 98101B32-BBE2-4BF2-A06E-2BB33D000C20
Partition table holds up to 36 entries
Main partition table begins at sector 2 and ends at sector 10
First usable sector is 34, last usable sector is 61071326
Partitions will be aligned on 2-sector boundaries
Total free space is 257992 sectors (126.0 MiB)
Number Start (sector) End (sector) Size Code Name
1 32768 163839 64.0 MiB 0700 modem
2 163840 165887 1024.0 KiB FFFF sbl1
3 165888 166911 512.0 KiB FFFF dbi
4 196608 197631 512.0 KiB FFFF DDR
5 229376 231423 1024.0 KiB FFFF aboot
6 231424 233471 1024.0 KiB FFFF rpm
7 262144 294911 16.0 MiB FFFF boot
8 294912 296959 1024.0 KiB FFFF tz
9 296960 296961 1024 bytes 0700 pad
10 327680 333823 3.0 MiB FFFF modemst1
11 333824 339967 3.0 MiB FFFF modemst2
12 339968 339969 1024 bytes FFFF pad1
13 360448 393215 16.0 MiB FFFF misc
14 393216 458751 32.0 MiB 0700 persist
15 458752 491519 16.0 MiB FFFF recovery
16 491520 497663 3.0 MiB FFFF fsg
17 524288 525311 512.0 KiB FFFF fsc
18 525312 526335 512.0 KiB FFFF ssd
19 526336 526337 1024 bytes FFFF pad2
20 526338 527361 512.0 KiB FFFF encrypt
21 557056 573439 8.0 MiB 0700 drm
22 573440 589823 8.0 MiB 0700 sns
23 589824 655359 32.0 MiB FFFF laf
24 655360 720895 32.0 MiB FFFF fota
25 720896 786431 32.0 MiB 0700 mpt
26 786432 787455 512.0 KiB FFFF dbibak
27 787456 789503 1024.0 KiB FFFF rpmbak
28 789504 791551 1024.0 KiB FFFF tzbak
29 791552 791567 8.0 KiB FFFF rct
30 819200 6488063 2.7 GiB 0700 system
31 6488064 7733247 608.0 MiB 0700 cache
32 7733248 7897087 80.0 MiB 0700 tombstones
33 7897088 7929855 16.0 MiB 0700 spare
34 7929856 8028159 48.0 MiB 0700 cust
35 8028160 60948479 25.2 GiB 0700 userdata
36 60948480 61071326 60.0 MiB 0700 grow
Now, it looks like this, so I am unable to use dd to copy any files to the (now apparently deleted or at least unavailable) partitions of the LG G2:
Code:
***************************************************************
Found invalid GPT and valid MBR; converting MBR to GPT format
in memory.
***************************************************************
Warning! Main partition table overlaps the first partition by 32 blocks!
You will need to delete this partition or resize it in another utility.
Warning! Secondary partition table overlaps the last partition by
33 blocks!
You will need to delete this partition or resize it in another utility.
Disk /dev/sdb: 2014208 sectors, 983.5 MiB
Model: Mighty Drive
Sector size (logical/physical): 512/512 bytes
Disk identifier (GUID): DEF7EA8F-7D62-49A1-8F27-4F59EF0FDF29
Partition table holds up to 128 entries
Main partition table begins at sector 2 and ends at sector 33
First usable sector is 34, last usable sector is 2014174
Partitions will be aligned on 2-sector boundaries
Total free space is 0 sectors (0 bytes)
Number Start (sector) End (sector) Size Code Name
1 2 2014207 983.5 MiB 0700 Microsoft basic data
I am afraid I have no backup of the partition table other than the output above, because I only learned of this feature of gdisk when looking for solutions of this (last) issue.
Is there any way I can restore the partition table of my device?
Any help in unbricking my phone is, of course, GREATLY appreciated. :fingers-crossed:

Resizing /system and /userdata in Note 3 SM-N9005

Hello to all.
I am trying to resize the partition /system using the parted and gdisk commands. But none of these commands succeed in changing mmcblk0 partitions after execution.
The things I do are as follows:
- install adb and fastboot and put them to the system variables.
- enable Settings>developer options>USB debugging and Root debugging
- install TWRP recovery.
- run cmd in adminitsrator permission.
- write these command in CMD :
adb root
adb reboot recovery
adb push gdisk /sbin
adb push parted /sbin
adb shell chmod 777 /sbin/gdisk
adb shell chmod 777 /sbin/parted
adb shell
~#> cd /dev/block
dev/block> gdisk mmcblk0
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Found valid GPT with protective MBR; using GPT.
Command (? for help): p
Disk /dev/block/mmcblk0: 61071360 sectors, 29.1 GiB
Sector size (logical/physical): 512/512 bytes
Disk identifier (GUID): 98101B32-BBE2-4BF2-A06E-2BB33D000C20
Partition table holds up to 128 entries
Main partition table begins at sector 2 and ends at sector 33
First usable sector is 34, last usable sector is 61071326
Partitions will be aligned on 2-sector boundaries
Total free space is 8158 sectors (4.0 MiB)
Number Start (sector) End (sector) Size Code Name
1 8192 38911 15.0 MiB 8300 apnhlos
2 38912 156543 57.4 MiB 0700 modem
3 156544 157567 512.0 KiB FFFF sbl1
4 157568 157631 32.0 KiB FFFF dbi
5 157632 157695 32.0 KiB FFFF ddr
6 157696 161791 2.0 MiB FFFF aboot
7 161792 162815 512.0 KiB FFFF rpm
8 162816 163839 512.0 KiB FFFF tz
9 163840 184319 10.0 MiB FFFF pad
10 184320 204799 10.0 MiB 8300 param
11 204800 233471 14.0 MiB 8300 efs
12 233472 239615 3.0 MiB FFFF modemst1
13 239616 245759 3.0 MiB FFFF modemst2
14 245760 268287 11.0 MiB FFFF boot
15 268288 294911 13.0 MiB FFFF recovery
16 294912 321535 13.0 MiB FFFF fota
17 321536 335853 7.0 MiB 8300 backup
18 335854 341997 3.0 MiB FFFF fsg
19 341998 341999 1024 bytes FFFF fsc
20 342000 342015 8.0 KiB FFFF ssd
21 342016 358399 8.0 MiB 8300 persist
22 358400 376831 9.0 MiB 8300 persdata
23 376832 5095423 2.3 GiB 8300 system
24 5095424 5709823 300.0 MiB 8300 cache
25 5709824 5730303 10.0 MiB 8300 hidden
26 5730304 61071326 26.4 GiB 8300 userdata
Command (? for help): d
Partition number (1-26): 26
Command (? for help):w
(curser blinking) and device goes to hang!!!!!
anyone can help me? I do this in parted command. It is like above.
after restarting the device, all of the partition are there, like before...

I also used PIT file with different partition sizes, but nothing change. Odin shown : RQT_CLOSE!!