After installing an unofficial build of Pixel Experience and having some issues with it i decided to flash my G6 back to firmware, but when tried doing it with LG UP i kept giving me Error messages about DLL's not matching each time i did it and it was weird to me cause i flashed it to firmware before with all the same files and it worked just fine, i tried LG Bridge but it won't install as it's stopping at 14%, my G6 is now on the Frimware Update screen, when i reboot it by pressing Volume Down + Power Button it shows the G6 Logo and boots straight back into Firmware Update, any ideas what im supposed to do at this point?
protectedcharms said:
After installing an unofficial build of Pixel Experience and having some issues with it i decided to flash my G6 back to firmware, but when tried doing it with LG UP i kept giving me Error messages about DLL's not matching each time i did it and it was weird to me cause i flashed it to firmware before with all the same files and it worked just fine, i tried LG Bridge but it won't install as it's stopping at 14%, my G6 is now on the Frimware Update screen, when i reboot it by pressing Volume Down + Power Button it shows the G6 Logo and boots straight back into Firmware Update, any ideas what im supposed to do at this point?
Click to expand...
Click to collapse
Have you fixed the phone ? If not I can provide you tommorow with the exact files you need to get your device working, but mainly you need for lg up the lg v40 dll so your device can be recognized and then you need a kdz file ( stock software ) that you care going to flash on your device.
AlexMihai26 said:
Have you fixed the phone ? If not I can provide you tommorow with the exact files you need to get your device working, but mainly you need for lg up the lg v40 dll so your device can be recognized and then you need a kdz file ( stock software ) that you care going to flash on your device.
Click to expand...
Click to collapse
I haven't fixed it yet, it'd be lovely if you'd be able to provide those files.
protectedcharms said:
I haven't fixed it yet, it'd be lovely if you'd be able to provide those files.
Click to expand...
Click to collapse
Get the dev patched LG UP from this post:
https://forum.xda-developers.com/showpost.php?p=76510671&postcount=168
and get the KDZ firmware specific or compatible to your phone from the lg firmwares website (just google it for the website link). You should still be able to enter download mode. Start LG UP on your PC and connect USB cable to the phone. then restart the phone by holding vol-down and power buttons, once the phone screen flickers and it starts restarting, let go of power and vol-down buttons and hold the vol-up button. You should now be back in download mode. Good luck.
Android# said:
Get the dev patched LG UP from this post:
https://forum.xda-developers.com/showpost.php?p=76510671&postcount=168
and get the KDZ firmware specific or compatible to your phone from the lg firmwares website (just google it for the website link). You should still be able to enter download mode. Start LG UP on your PC and connect USB cable to the phone. then restart the phone by holding vol-down and power buttons, once the phone screen flickers and it starts restarting, let go of power and vol-down buttons and hold the vol-up button. You should now be back in download mode. Good luck.
Click to expand...
Click to collapse
I did what you advised yet im getting a 0x2000 error and can't proceed further
protectedcharms said:
I did what you advised yet im getting a 0x2000 error and can't proceed further
Click to expand...
Click to collapse
This error is probably due to older dll, you are still using the older LG UP still installed on your computer. Remember, to use the Dev patched LG UP, you just unzip the file you downloaded and go inside the folder and doubleclick on the LGUPD.exe to start it.
If that doesn't work, need more information:
Did you uninstall all LG UP before installing Dev patched LG UP? Make sure you uninstall all LG UP from your PC and then use the Dev patched LG UP directly from the downloaded folder. Make sure you reboot the computer afterwards before trying. Try different USB cable if you have one. Try different USB port on the computer.
Make sure you are opening/using the LG UP you just downloaded. Which option did you pick in LG UP? Try Partition DL or Refurbish, both options if either works? Do not try any options that you don't know about, some options can delete everything on phone including IMEI information so don't try options such as chip erase.
What is your phone's model number and which kdz are you using? Does 0x2000 error give any more information on the popup?
If none of this works, post back here.
Android# said:
This error is probably due to older dll, you are still using the older LG UP still installed on your computer. Remember, to use the Dev patched LG UP, you just unzip the file you downloaded and go inside the folder and doubleclick on the LGUPD.exe to start it.
If that doesn't work, need more information:
Did you uninstall all LG UP before installing Dev patched LG UP? Make sure you uninstall all LG UP from your PC and then use the Dev patched LG UP directly from the downloaded folder. Make sure you reboot the computer afterwards before trying. Try different USB cable if you have one. Try different USB port on the computer.
Make sure you are opening/using the LG UP you just downloaded. Which option did you pick in LG UP? Try Partition DL or Refurbish, both options if either works? Do not try any options that you don't know about, some options can delete everything on phone including IMEI information so don't try options such as chip erase.
What is your phone's model number and which kdz are you using? Does 0x2000 error give any more information on the popup?
If none of this works, post back here.
Click to expand...
Click to collapse
I've tried the provided dev lg up on a whole different pc, and that's the error im getting so im 100% sure it's not due to an older lgup, in the error message it shows that it's some kind of dll problem and i should install a new package .msi, i've tried different cables, ports, i did Partition DL & Refurbish, got 0x2000 both times
Related
All thanks goes to there respective threads i just stringed this list together to work for me
NOTE- LG G2 D801 Windows 8- works for all i believe
first you obviously need root, and in order for that to work at this time 4.4 doesnt have root. you nee to revert back to stock here-----------------
http://forum.xda-developers.com/showthread.php?t=2432476
You can find the firmware and dlls for your specific device there as well
The TOT method, With LGflashtool is the easiest and once you download the dll and tot firmware you NEED TO SET THE COMPUTERS DATE BACK TO JANUARY 2010 or lower(somewhere around there), this is by far the easiest method for me... Then you need to turn off wifi or turn on airplane mode... you then need a code found here in this thread scroll down some and there will be a few serialish code try each one the second one worked first try.
http://forum.gsmhosting.com/vbb/f177/lg-flash-tool-free-no-need-b2b-user-pass-1628819/
then unless you already changed the com port for your device to 41 your nearly there. Then you need to get your g2 into download mode, you do this by having your g2 off then without pressing the power button press the up volume button and plug it into the the computer.
then hit the right arrow button and try different ports if it doesnt get connected.
Then you need root here-------------
http://forum.xda-developers.com/showpost.php?p=48709232&postcount=869
Youtube tutorial------------
https://www.youtube.com/watch?v=HKuedInhdjU
Boom then get recovery tools from the playstore-------------
https://play.google.com/store/apps/details?id=de.mkrtchyan.recoverytools
Install twrp each device is listed
http://teamw.in/project/twrp2/197
For some reason i kept getting stuck in adb so just download TWRP in its zip format and just flash it in your current TWRP then reboot into system or back to bootloader then you have the latest 2.7.0 boyyyyyyyyeeee so bawesome.
Thanks for clicking on my messy newbish thread i just though some people might have wanted to know
Hi guys, can anyone help me with this, I recently acquired a lg e400 and rooted it, was going to flash cyanogenmod for it but i messed up and flashed a different baseband for a different model phone first(i know it was stupid, now i have a semi-hard brick and the only mode i can get into is a black screen, computer sees the phone as lge androidnet usb, i enter this by holding the vol down and power as i plug into the computer. I've tried every other key combo but cannot get into any other mode....i've tried using the lg flash tool with no success, tried uptest with no result, tried the lg mobile support tool and it picks up my phone as the correct phone lge400r with a software version of v20e which used to be a v10b....how can i flash just the correct baseband?....i also tried kdz and when i try and flash the original kdz file it starts but fails with wparam:100 lparam:1002, i'm thinking maybe i have the incorrect firmware kdz....could anyone point me in the right direction with this?....it's driving me nuts
dantheman1977 said:
Hi guys, can anyone help me with this, I recently acquired a lg e400 and rooted it, was going to flash cyanogenmod for it but i messed up and flashed a different baseband for a different model phone first(i know it was stupid, now i have a semi-hard brick and the only mode i can get into is a black screen, computer sees the phone as lge androidnet usb, i enter this by holding the vol down and power as i plug into the computer. I've tried every other key combo but cannot get into any other mode....i've tried using the lg flash tool with no success, tried uptest with no result, tried the lg mobile support tool and it picks up my phone as the correct phone lge400r with a software version of v20e which used to be a v10b....how can i flash just the correct baseband?....i also tried kdz and when i try and flash the original kdz file it starts but fails with wparam:100 lparam:1002, i'm thinking maybe i have the incorrect firmware kdz....could anyone point me in the right direction with this?....it's driving me nuts
Click to expand...
Click to collapse
I think that you should use this site LINK. There you have all of the firmwares for L3, and you can choose baseband
Daniolki said:
I think that you should use this site LINK. There you have all of the firmwares for L3, and you can choose baseband
Click to expand...
Click to collapse
yes, i tried that, but the only mode i can enter is download mode.....kdz updater fails, is there a way to flash in download mode?
1. Download THIS, your firmware as .kdz file and LG PC Suite
2. Install msxml.msi, and LG PC Suite
3. Run KDZ_FW_UPD (some antivirus software can recognize it as malicious software, but I have used it, and there is not any problem with this)
4. Select Type: 3GQCT, PhoneMode: DIAG or PhoneMode: Emergency (I don't know what is difference between them, so you have to test it)
5. In KDZ File you are choosing your previously downloaded firmware which is in .kdz format file
6. Boot to Download Mode (vol down + power) in the same moment you have to plug your LG to PC.
7. Wait for drivers installation, if nothing is installing go to the next step.
8. In KDZ_FW_UPD hit Launch Software Update and you have to wait until you see message "===FINISHED==="
That's all.
I used THIS guide.
Hello guys,
So I bricked my D802 , how? first it was bricked because of a wrong version of TWRP, untill here no problem, i tried many tutorials on how to go back to stock rom, then i found that it was a Qualcom thing problem, so I found that tutorial about replacing the .img files etc... , pretty easy, i could enter the recovery menu, but it had no rom, i downloaded the stock rom kdz file , started flashing it, then, for some dumb reason the flashing stopped, I ... plug out the usb cable... I didn't notice untill I saw that the program froze, and now the phone is stuck at the LG logo, impossible to do anything, pc doesn't recognize it, can't go to recovery menu, can someone help me please? or at least tell me if I should just throw that phone or keep it if it has a chance of living a bit longer
Kicha0 said:
Hello guys,
So I bricked my D802 , how? first it was bricked because of a wrong version of TWRP, untill here no problem, i tried many tutorials on how to go back to stock rom, then i found that it was a Qualcom thing problem, so I found that tutorial about replacing the .img files etc... , pretty easy, i could enter the recovery menu, but it had no rom, i downloaded the stock rom kdz file , started flashing it, then, for some dumb reason the flashing stopped, I ... plug out the usb cable... I didn't notice untill I saw that the program froze, and now the phone is stuck at the LG logo, impossible to do anything, pc doesn't recognize it, can't go to recovery menu, can someone help me please? or at least tell me if I should just throw that phone or keep it if it has a chance of living a bit longer
Click to expand...
Click to collapse
This guide is pretty good.
https://forum.xda-developers.com/lg-g2/help/noob-friendly-recovery-download-mode-t3112805
Jan Philipp said:
This guide is pretty good.
https://forum.xda-developers.com/lg-g2/help/noob-friendly-recovery-download-mode-t3112805
Click to expand...
Click to collapse
I forgot to add this:
For D800:
Master archive of 5 files needed to do this:
https://www.androidfilehost.com/?fid=95747613655047114
Just had the same issue and answered in another thread but I'll quote myself again.
https://forum.xda-developers.com/sho....php?t=2663369
https://www.youtube.com/watch?v=Lg693AYgoTo
ATT 4.4.2 KitKat:
https://mega.nz/#!n0RTUYZD!MVntiPxuyW...
ATT 4.2.2 JellyBean:
https://mega.nz/#!e5RERS4L!FjZyopcvwM...
T-Mobile 4.2.2 JellyBean:
https://mega.nz/#!qsRSBDwD!KKCETp41O1...
Modified DLL file if nothing else works:
https://mega.nz/#!f5xTGKrC!ifBCOAnK4j...
I had a very similar problem with it getting stuck at the logo after pushing supersu to the phone. I followed Supersport every single step of the way in his video. I think his links are the only valid ones online now, so just download them and reflash your phone. If your G2 is anything like mine, drivers will never appear to be installed correctly and it never restarts, only shuts down.
His method is:
1) Download and install LG drivers on PC
2) Download and install the flash tool and patch it
3) Download and load the .tot and .dll files into the flash tool
4) Enter download mode on G2 by holding volume up while connecting USB
5) Switch G2 Com port to 41 in device manager
6) Once Flash tool shows that all ports are ready, power down G2 and disconnect
7) Hold volume up and reconnect to get back into download mode
8) LG Flash tool starts flashing
9) Complete
Note: If your G2 was screwed up as bad as mine, it'll say failed but all the main system files will load to the device before it restarts and it'll even shut itself off while doing it's installation on first reboot. Mine somehow was still revived from this state with his method.
I was trying to update with LGUP application for firmware update but didn't success, so I removed the USB cable and pressed Volume down and power button to restart. But it went straight into Firmware Update and LGUP application can't find the port.
So, my phone is stucking in Firmware update screen, please help me how to restore the firmware and get out from Firmware Update screen, many thanks and greatly appreciated.
Hold the power button until you get a black screen. Download LG Mobile Support tool and the LG Drivers. Plug USB In and then hold the Power + Volume Up key. On your screen, click Upgrade Recovery. From there, you can do a factory reset through download mode of your phone.
Enter download mode and connect the phone in the PC. Download LG brige and open it. When you are inside the programe you will see a window of Software update enter here and there is an option that is for bad installation otas (to reinstall and correct errors). Use this and I think this will handle.
Another option I think is using LG Up you will see your device in download mode. Try to enter download mode and see if this works also.
Thanks both - I ran into a similar situation. I pulled down both the 11a and 14a KDZ files, and used UpperCut and LGUP to flash first the 14a and then the 11a image. Unfortunately in both cases after LGUP does its thing, I'm getting the LG logo, followed by fastboot screen.
I cannot reboot to get past it, and I cannot flash recovery (it says the boot loader is locked). I cannot flash the Unlock.bin from LG because apparently the KDZ re-enabled the software lock prohibiting bootloader unlocks.
So I'm suck with a phone that will only boot into fastboot, stock recovery or into download mode, and I cannot figure out how to get back to something functional. I've tried reflashing with LGUP - that doesn't work. And the LG Bridge "Update Error Recovery" option gives an error "Connect your mobile device to the USB Port" even though it is, and the LG USB drivers are installed.
Would appreciate any pointers someone could offer.
gewecht said:
Thanks both - I ran into a similar situation. I pulled down both the 11a and 14a KDZ files, and used UpperCut and LGUP to flash first the 14a and then the 11a image. Unfortunately in both cases after LGUP does its thing, I'm getting the LG logo, followed by fastboot screen.
I cannot reboot to get past it, and I cannot flash recovery (it says the boot loader is locked). I cannot flash the Unlock.bin from LG because apparently the KDZ re-enabled the software lock prohibiting bootloader unlocks.
So I'm suck with a phone that will only boot into fastboot, stock recovery or into download mode, and I cannot figure out how to get back to something functional. I've tried reflashing with LGUP - that doesn't work. And the LG Bridge "Update Error Recovery" option gives an error "Connect your mobile device to the USB Port" even though it is, and the LG USB drivers are installed.
Would appreciate any pointers someone could offer.
Click to expand...
Click to collapse
In older LG phones work LG Flashtool (2014)...Maybe with this you can flash KDZ firmware https://forum.xda-developers.com/showthread.php?t=2797190
gewecht said:
Thanks both - I ran into a similar situation. I pulled down both the 11a and 14a KDZ files, and used UpperCut and LGUP to flash first the 14a and then the 11a image. Unfortunately in both cases after LGUP does its thing, I'm getting the LG logo, followed by fastboot screen.
I cannot reboot to get past it, and I cannot flash recovery (it says the boot loader is locked). I cannot flash the Unlock.bin from LG because apparently the KDZ re-enabled the software lock prohibiting bootloader unlocks.
So I'm suck with a phone that will only boot into fastboot, stock recovery or into download mode, and I cannot figure out how to get back to something functional. I've tried reflashing with LGUP - that doesn't work. And the LG Bridge "Update Error Recovery" option gives an error "Connect your mobile device to the USB Port" even though it is, and the LG USB drivers are installed.
Would appreciate any pointers someone could offer.
Click to expand...
Click to collapse
I have the same issue - I was on Lineage os and flashing the OTA update caused bootloop to recovery. So I wanted to flash back to stock using LGUP and 14A. I did that before without issues.
This time though all installed fine but after reboot the phone immediately goes to fastboot, exactly as described above. I just spend several hours trying to fix it but with no results. The LG Bridge won't recognize the phone no matter what I do in Windows (tried 3 different PCs). On a Mac it will start connecting and will end up saying "you need to enable MTP connection".
From what I garther the stock rom flashed fine - the factory reset works, even shows "erasing data", the LG UP recognizes the phone as 14A (I tried 11A, 13A too - seems to install fine but goes immediately to fastboot after reboot).
The only thing I realized I did different when flashing the stock rom with LGUP was not using the original LG USB cable. But reflashing with original cable makes not difference now - still going to fastboot.
Any help would be greatly appreciated.
Have you guys been able to do the Upgrade recovery in the LG support tool? Did it work? It starts fine for me but after downloading the recovery file I always get and error, see the screenshot.
I was able to grab the kdz file and tried to flash it with LGUP but still the same thing. It seems like it flashes fine but after reboot it immediately goes to fastboot
kloubik said:
Have you guys been able to do the Upgrade recovery in the LG support tool? Did it work? It starts fine for me but after downloading the recovery file I always get and error, see the screenshot.
I was able to grab the kdz file and tried to flash it with LGUP but still the same thing. It seems like it flashes fine but after reboot it immediately goes to fastboot
Click to expand...
Click to collapse
Sadly I'm in the same boat as well. I'll pull some of their error messages I've gotten with LG Flash Tool this afternoon. I've tried 2014 and 2017. Both to no success.
I suspect it may be something with the /misc partition. Im going out on a limb, but I'm guessing that the AOSP and Lineage ROMs may touch misc. That partition may have some key identifiers for the LG tools. And the KDZ doesn't have a misc partition embedded inside it.
I was hoping the kdz file I was able to grab from the Lg Support tool would be different from regular stock rom 14a that is available around the internet but it appears to be exactly the same file (based on the file size). My original hope was that the file would support "Refurbish" option in the LGUP tool but it only works with "Upgrade".
I wonder if the "Refurbish" option would fix this and re-flashed all partitions - if only we could find a kdz file that would work with the refurbish option. So far all files I tried (11a, 13a, 14a) only support the upgrade option.
Thanks for all of your helps, I used LGUP and WondersMobile application on the computer and LGUP can not see the port. I did un-install the WondersMobile and LGUP can see the port and finally upgraded to latest firmware.
gewecht said:
Thanks both - I ran into a similar situation. I pulled down both the 11a and 14a KDZ files, and used UpperCut and LGUP to flash first the 14a and then the 11a image. Unfortunately in both cases after LGUP does its thing, I'm getting the LG logo, followed by fastboot screen.
I cannot reboot to get past it, and I cannot flash recovery (it says the boot loader is locked). I cannot flash the Unlock.bin from LG because apparently the KDZ re-enabled the software lock prohibiting bootloader unlocks.
So I'm suck with a phone that will only boot into fastboot, stock recovery or into download mode, and I cannot figure out how to get back to something functional. I've tried reflashing with LGUP - that doesn't work. And the LG Bridge "Update Error Recovery" option gives an error "Connect your mobile device to the USB Port" even though it is, and the LG USB drivers are installed.
Would appreciate any pointers someone could offer.
Click to expand...
Click to collapse
kloubik said:
I have the same issue - I was on Lineage os and flashing the OTA update caused bootloop to recovery. So I wanted to flash back to stock using LGUP and 14A. I did that before without issues.
This time though all installed fine but after reboot the phone immediately goes to fastboot, exactly as described above. I just spend several hours trying to fix it but with no results. The LG Bridge won't recognize the phone no matter what I do in Windows (tried 3 different PCs). On a Mac it will start connecting and will end up saying "you need to enable MTP connection".
From what I garther the stock rom flashed fine - the factory reset works, even shows "erasing data", the LG UP recognizes the phone as 14A (I tried 11A, 13A too - seems to install fine but goes immediately to fastboot after reboot).
The only thing I realized I did different when flashing the stock rom with LGUP was not using the original LG USB cable. But reflashing with original cable makes not difference now - still going to fastboot.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
I too am having same problem. I've tried all the images from 11A to 14A, all of them flash with no errors on LGUP and every time LGUP detects the phone as having the last version flashed. Unfortunately, the phone also boots to fastboot every time. Nothing else to add to your descriptions at this time I'm afraid...
gewecht said:
Sadly I'm in the same boat as well. I'll pull some of their error messages I've gotten with LG Flash Tool this afternoon. I've tried 2014 and 2017. Both to no success.
I suspect it may be something with the /misc partition. Im going out on a limb, but I'm guessing that the AOSP and Lineage ROMs may touch misc. That partition may have some key identifiers for the LG tools. And the KDZ doesn't have a misc partition embedded inside it.
Click to expand...
Click to collapse
I am absolutely positive my problem is at least in part due to a messed up /misc partition though. @gqo actually described what I did pretty thoroughly in his thread, albeit in a G5. Post #9 has the fix but it didn't work for me.
I've also stumbled upon a menu under the Firmware Update screen that I had never seen before and cannot fin any mention to... Would any of you guys know what it is for? It reads something like:
Code:
** SELECT MENU **
** Select : Power Key(Long) **
** Move : Power Key(Short) **
-> MA-USB(WIFI) DL
POWER OFF
PHONE INFO
BACK
Okay, I figured it out. The menu, at least the first option, appears to be for Wi-Fi firmware update. I wonder what file the phone actually downloads... And if it would be able to fix our phones. The only unprotected network I had in hand was a mobile hotspot in my not-so-LTE Nexus 5, so I got as far the firmware download start but didn't risk it on such a slow and unpredictable network. On top of that my Nexus 5 has also gotten pretty good at bootlooping, that's why I got this G6 in the first place. If anyone out there has a reliable unprotected network and nerves of steel it could be interesting to see if the outcome of this update is different from the LGUP one.
How do you access this menu?
What I started working on yesterday is trying to build a image file for the Qualcomm Flash Image loader and see if I can flash the phone using this tool... But I have never used this tool before, right now it does not detect my phone - I need to work on that + see if I can correctly build the image file from kdz. I found some youtube step by step tutorials so we will see. I will post update on the progress tonight or tomorrow.
kloubik said:
How do you access this menu?
What I started working on yesterday is trying to build a image file for the Qualcomm Flash Image loader and see if I can flash the phone using this tool... But I have never used this tool before, right now it does not detect my phone - I need to work on that + see if I can correctly build the image file from kdz. I found some youtube step by step tutorials so we will see. I will post update on the progress tonight or tomorrow.
Click to expand...
Click to collapse
I'm not sure if there's a better way to do it, but I access it by removing the usb cable after I successfully get in Download Mode. Then I'm not sure if there's any specific key combo, I've been randomly pressing the power and the volume down buttons and at some point I get into that menu. In the menu though, for some reason, I think I can only select an option if I long press both the volume down and power buttons. The "POWER OFF" option has come in handy because so far is the only way I can actually turn my phone off. The "PHONE INFO" hasn't worked for me yet. The menu also reacts when you add/remove the microsd card... I wonder if it can be used for something other than a WiFi firmware upgrade. I haven't had the chance to connect the phone to a computer to see how the device is recognized, if at all.
And that image you're working on sounds like a neat idea, I wish I could help but I'm afraid I wouldn't have the skill. I may be able to test though. Anyway, Godspeed!
Unundra said:
I too am having same problem. I've tried all the images from 11A to 14A, all of them flash with no errors on LGUP and every time LGUP detects the phone as having the last version flashed. Unfortunately, the phone also boots to fastboot every time. Nothing else to add to your descriptions at this time I'm afraid...
I am absolutely positive my problem is at least in part due to a messed up /misc partition though. @gqo actually described what I did pretty thoroughly in his thread, albeit in a G5. Post #9 has the fix but it didn't work for me.
I've also stumbled upon a menu under the Firmware Update screen that I had never seen before and cannot fin any mention to... Would any of you guys know what it is for? It reads something like:
Code:
** SELECT MENU **
** Select : Power Key(Long) **
** Move : Power Key(Short) **
-> MA-USB(WIFI) DL
POWER OFF
PHONE INFO
BACK
Okay, I figured it out. The menu, at least the first option, appears to be for Wi-Fi firmware update. I wonder what file the phone actually downloads... And if it would be able to fix our phones. The only unprotected network I had in hand was a mobile hotspot in my not-so-LTE Nexus 5, so I got as far the firmware download start but didn't risk it on such a slow and unpredictable network. On top of that my Nexus 5 has also gotten pretty good at bootlooping, that's why I got this G6 in the first place. If anyone out there has a reliable unprotected network and nerves of steel it could be interesting to see if the outcome of this update is different from the LGUP one.
Click to expand...
Click to collapse
I'll play around a bit and see if I can land on this menu. At this point I'll try anything. I'm on an iPhone until I get this fixed - so I'm motivated!
I can setup an open guest network off my main wi-fi this evening and see what I can find out.
EDIT Sorry, I tried playing around here, but I couldn't figure out how to get back into the the menu you uncovered. If you could give some instructions on how to do it, I'm happy to give it a shot on my device.
I was able to access the menu today...what worked for me was at the firmware screen unplug the usb cable and then press volume down and power button three times quickly. I tried to connect to a wifi and it does not really do anything. I think it just establishes wifi connection but it does not download anything on it's own - it's waiting for another connection.
Also I got stuck with building the image file from kdz, it has no information on partitions. At this point I decided to ship to LG for a quote and will see how much they will ask for a reflash.
I got as far as selecting a network and getting some sort of a download start screen, but I interrupted it right away so I wasn't sure the download would actually go through... Apparently it does not. If this menu has some sort of flashing capabilities though, it might be worth checking how secure it is. If someone can get it to download and flash a modded file perhaps there could be a chance of flashing a custom recovery or something... I'm thinking about those guys that have an unlockable bootloader (which we ironically also have now).
Anyway, all of this goes well beyond my skill so I followed your example and submitted a repair service request to LG. It'll take quite long but shipping is free, so I figured I'd give it a try. I'm assuming this is an easy fix with the right software tools, so I hope LG doesn't overcharge for it. I'm even half hoping they'll do it under the limited warranty... If I recall correctly unlocking the bootloader doesn't immediately void all warranty, there's room to prove the bootloader was never actually unlocked. And after all LG does say that once unlocked, it cannot be undone and our phones are, in fact, running stock firmware and have a locked bootloader.
Update: My phone was received today by LG. In LG's Track Repair page, the status briefly showed as Undergoing Diagnostic but quickly moved to Repair In Progress, it's current status. Given that LG was supposed to contact me in case the repair was not covered by the limited warranty, meaning that an extra fee would've to be paid, I'm assuming the phone will be fixed (if possible, that is) free of charge. I will update you guys again soon, but if anyone out there is still struggling with this issue I'd recommend considering sending the phone to LG.
I have the exact same problem. Please keep us in the loop of what happens to your phone with LG
My phone has been received by LG for this issue on 9/26. It quickly moved through diagnostic to "repair in progress" on the first day plus showed ETA back to me in 6 business days. Ever since that it's stuck in that mode, no update or contact from LG. I check the status every day - every day it says the same - ETA 6 business days. It's been a week and half now with no update. I kind of expected it's going to take 2-3 weeks but annoyed that they say 6 days ETA and then you don't hear from anyone for almost 2 weeks with no change in status.
Update #2: The status finally moved to Shipped To Customer. I haven't been contacted by LG yet, so I guess the phone could've been shipped fixed as much as it could've been shipped as is for being unfixable. Either way, I wasn't and most likely won't be charged. FedEx hasn't got an ETA for the delivery, but I'll let you guys know as soon as I get my phone back.
Edit: Got an e-mail from LG. It reads something like:
Defect: Software failure
Payment Type: NOT APPLICABLE
Repair Results: S/W upgrade (download)
Repair Cost: $ 0.00
Warranty Status: In Warranty
Tax: $ 0.00
Total: $ 0.00
I guess I got away with it, I hope you guys do too.
Sent from my Nexus 5 using Tapatalk
Hey everyone,
I'm very new to Android development and XDA, but a few years ago I bricked this LG G2 and I don't really remember how, except that I rooted it and tried to install a custom ROM, which obviously didn't work.
I have tried a number of different guides on these forums, but somewhere or another I get stuck on them.
[HOW TO] Fix your soft-bricked LG G2 (All Variants)
I'll be very specific, something most people lack of. Okay lets get to it, I recently bricked my LG G2 (D801) by installing a ROM that wasn't compatible with my model. I fixed it by doing the following steps. This worked for me using Windows 8.1...
forum.xda-developers.com
With this one, although the device shows up in Devices and Printers, neither Fastboot nor the LG Flash Tool detect it. I have installed both the LG Mobile Driver and the LG United Mobile Driver.
“./fastboot devices” is empty.
I have the TOT file and the DLL that the (patched version of the) LG Flash Tool requires.
I have an Ubuntu 20.04 install as well as Windows 11. I can get into Firmware Update with a USB icon ("Do not unplug the USB connection until the process is complete. 0%." ...etc), when I turn it on normally it shows a battery made out of grey and white bars and a percentage, and sometimes the LG logo.
If you need to know anything else don't hesitate to ask \
Much appreciated,
ninjadev64
use a usb 2.0 port, update adb/fastboot, update drivers, remove previous related devices using nirsoft usbdeview. try using a windows 7 or earlier system. can you manually get into recovery? if so update to latest blastagator twrp which should be 3.3.1.
DvineLord said:
use a usb 2.0 port, update adb/fastboot, update drivers, remove previous related devices using nirsoft usbdeview. try using a windows 7 or earlier system. can you manually get into recovery? if so update to latest blastagator twrp which should be 3.3.1.
Click to expand...
Click to collapse
- I was using a 3.0 port, although it still showed up in Control Panel - I’ll try with a 2.0 port today
- I installed “Minimal ADB and Fastboot” and the drivers yesterday, so they should be up to date
- I’ll use usbdeview too
- I can’t use an older system unfortunately
- How do I get into recovery?
Recovery: With the device powered off and usb unplugged, hold Volume Down + Power. When the LG logo appears, release both buttons and hold Volume Up + Volume Down.
Ok, so I got into a factory reset screen that way, I said yes to factory reset, is that the right thing to do? (@DvineLord)
ADB recognises the device, but it's unauthorised. And I obviously can't boot it up to authorise it.
Factory reset just got me back to the LG screen for a long time, so I powered it off again.
Also, when I try to change the COM port to 41, when I click Advanced in Port Settings, it just stops me with "You must have write privileges in the registry for this device in order to modify the device's advanced settings".
I can't find the right path for the device in regedit to follow these steps: https://forums.techguy.org/threads/need-write-permission-for-com1-port.577543/#post-4756991
Were you able to get into Recovery? or did you get into Bootloader/Fastboot/Download?
Bootloader/Fastboot/Download: With the device powered off, hold Volume Up and connect the USB cable.
You want to be in Recovery like I posted above. Do you have TWRP on your device?
DvineLord said:
Were you able to get into Recovery? or did you get into Bootloader/Fastboot/Download?
Bootloader/Fastboot/Download: With the device powered off, hold Volume Up and connect the USB cable.
You want to be in Recovery like I posted above. Do you have TWRP on your device?
Click to expand...
Click to collapse
The recovery method you said to try got me into a factory reset screen, as I stated. All the other recovery methods I saw online didn’t work, so maybe I have no recovery?
I said in the original post that I can obtain download mode. I recognise “TWRP” but I’m pretty sure I botched it up while installing it, because I didn’t know how any of this worked, 4 years ago.
Thank you!
Unfortunate you can't get ADB/Fastboot working.
DvineLord said:
Unfortunate you can't get ADB/Fastboot working.
Click to expand...
Click to collapse
Soo... what can I do?
Try to recall as closely as possible the exact steps you used to modify your device. autorec, ioroot, stump root, avicohh, stock build you were on, custom rom you tried to flash, custom recovery, bootstacks, custom kernel, etc.
Odds are you'll have to try again to flash back to stock, something which I haven't done yet.
Unfortunately all I know is that I tried to install a custom ROM, scuffed up when I was installing twrp, the ROM didn't work and now I have no recovery to fix it. Flash back to stock *is* what I'm trying to do (that's your third question/point which I've already explained in the original post).
If anyone with the same problem visits this in the future, please save this post and share your solution if you find one, cause I'm still stuck!
hope you get it flashed back to stock. make sure to do the first 5 things i listed in my initial post to see if that helps you flash back to stock. the data cable can also make a difference sometimes too.