Database Users

02 GPRS

Does anyone know the GPRS setting for 02 PAYG UK sim cards?
Thanks.

hi,
I have also posted a thread asking for the settings but no luck at all, the only way so far is to pay for dial up

o2 GPRS setting for PAYG
Try This: http://www.filesaveas.com/o2wap.html
Good Luck

These settings will allow you to access the whole of the internet on your phone using PAYG, as currently you cannot access any site except google.com and o2.co.uk. If i was you i would sign up for the 7.50 a month unlimited browsing bolt on(Not actually true as you are limited to 200mb a month). You should get 1mb free a month, but as you will find out 1mb doesnt last very long,if you go browsing, i would say it would be good for about 5 pages then its gone and you will be paying top wack for the internet.
Please note that only Mobile Internet Explorer will work with these settings, you will not be able to use or access Mobile MSN or Outlook as these are not supported.
• Go to Start > Settings > Connections > Advanced (Tab) > Select Networks (Button)
• You should now be on a screen titled “Network Management”. Now select both drop boxes to “My Work Network” then tap OK
• You now need to tap the Tasks tab and then the “Manage existing connections” link
• From here, tap the New button
• Name the new connection “O2 GPRS” and select modem as “Cellular Line (GPRS)” then tap Next
• You will now asked for the Access point name, here you should enter: “payandgo.o2.co.uk”, then tap Next
• You will now be asked for the username and password. The username is “payandgo”, and the password is “password”
• Ignore the Domain box and ignore the Advanced button, just tap Finish
• You will now be presented with a screen with your connections listed. Simply tap “O2 GPRS”. (There will now be a dot besides the name “O2 GPRS”. There may be other connections, you can delete if you wish. You also may have an “Auto pick” option, do not select this)
• You now need to tap the Proxy Settings tab
• On this screen you need to make sure that both the “This network connects to the Internet”, and “This network uses a proxy server to connect to the internet” tick boxes are both ticked
• In the Proxy server box below the tick boxes, enter: “193.113.200.195”
• Now tap the “Advanced” button
• Tap HTTP, enter server as “193.113.200.195”, port: “8080”, tap OK
• Tap WAP, enter server as ”193.113.200.195”, port: “9201”, tap OK.
• Leave Secure WAP blank (if there is anything in this entry, delete it)
• Tap Socks, enter server as “193.113.200.195”, port: “1080” and the type as “Socks 4”, then tap OK
• Tap OK 3 more times. Then tap X
• Now launch Mobile Internet Explorer to test the new settings

worked a treat, thanks mate.

8525 Set For T-Mobile Not Receiving MMS or Internet

Hello I'm new to this community and I'm also new at modifying these phones, however yesterday I went to the T-Mobile store and checked the settings for my MMS and still wasn't able to receive MMS no matter what picture they sent me it will only show a thumbnail of only 3K in size, when going to my messaging options I can only see the Inbox, Outbox & Draft folder but no Sent folder... The T-Mobile emailed me the settings but I still can't get it to work, they said Cingular phones aren't capable to connecting with T-Mobile MMS I don't know if is BS or what but here's what he emailed me
Configuring MMS on a Windows Mobile 6.1 Standard Device
1. Tap on Start
2. Scroll to and tap on Messaging
3. Tap on Menu (lower right corner)
4. Tap on MMS Configuration
5. Tap on the Preferences tab and verify the following settings
6. Verify that Retrieve messages Automatically is: [checked]
7. Verify that Download on home network only is: [unchecked]
8. Save sent messages is: [optional]
9. Reject all messages is: [optional]
10. Allow delivery report is: [optional]
11. Allow read report is: [optional]
12. Use signature with this account is: [optional]
13. Attempts before giving up is: [3]
14. Photo Resolution is: [original]
15. Tap on the Servers tab
16. Tap on New
17. Tap on Server Name and enter [Picture Messaging]
18. Tap on Gateway and enter: [216.155.165.050]
19. Tap on Port and enter: [8080]
20. Tap on Server Address and enter: [http://216.155.174.84/servlets/mms]
21. Tap on Connect Via and select [T-zones] or My Work Network
Note: Connect Via should be the name or catagory that the Wap settings were entered under
22.
23. Tap on Sending Size Limitation and enter: [300k]
24. Tap on Wap version and select: [2.0]
25. Tap on OK
26. Highlight [Picture Messaging] then tap on Set As Default
27. Tap Ok
WAP Configuration on Windows Mobile 6.1 Standard
1. From the main screen tap Start
2. Scroll to and tap on Settings
3. Tap on the Connections tab
4. Tap on the Connections icon
5. Under My Work Network tap on Add A New Modem Connection
6. Tap on Name and enter: [T-Zones]
7. Tap on Next
8. Tap on Modem Type and choose [Cellular Line GPRS]
9. Tap on next
10. Tap on Access Point Name and enter: [wap.voicestream.com
]
11. Ensure that Username is left: [blank]
12. Ensure that Password is left: [blank]
13. Ensure that Domain is left: [blank]
14. Tap on Finish
15. Tap the tab for Proxy Settings
16. Verify that the box next to This Network Connects to the Internet is: [checked]
17. Verify that the box next to This Network uses a Proxy server to connect to the internet is: [checked]
18. Tap on the Proxy Server box and enter: [216.155.165.050]
19. Tap on the Advanced button
20. Tap on the HTTP field
21. Verify that the server is listed as: [216.155.165.050]
22. Tap in the Port field and enter: [8080]
23. Tap OK in the upper right corner 3 (three) times to return to the main screen
24. If the device has a wap data package already provisioned then open Internet Explorer and attempt to browse a wap page such as [wap.myvoicestream.com]
On top of that after installing the CAB file which allows you to set up the internet for the 39.99 package it doesn't even go on the internet, I'm using the Manila2D package with TouchFLO 2d included, the weather won't update either so as you can see couple of different issues, I've tried flashing the phone couple of times with different ROMs and always having the same problem... your help is greatly appreciated
thanks

can anyone help me please?
thanks

Do a search for and download Arcsoft mmscomposer.cab - I use 5.0.31.11.
Then run the configuration tool, if you have a rom that has it cooked in otherwise do a search, download the .cab and install it.
This should set you right...

SPB Free Panel - Weather

Hello guys
I was wondering what your experiences are with the weather feature on the free SPB panel. Is the weather supposed to auto update? there is an option set to automatically update, but for some reason mine doesnt. But when im connected to wifi or active sync it updates.
I have made sure non of the other options are ticked like docked or free connection as I want it to update through GPRS.
Can someone tell me if its supposed to update through GPRS or whether its designed to update only through wi-fi and active sync.
I have a vodafone x1 if that helps.

I had the same problem, and fixed it by either:
1 - amending the MMS settings (voda sent me the settings which needed to be entered manually), if you're getting MMS messages OK then it isn't this.
2 - Change connection settings from post #7 here: http://forum.xda-developers.com/showthread.php?t=450502
Not sure which one it was cos I did them both at around the same time and noticed weather updates regularly then!

Sounds like you are using the Vodafone WAP settings to surf the web (classed as MyISP). This tends to block most requests that aren't done via a browser* and instead you should use Vodafone Internet settings (classed as WEB).
*that said quite a lot off apps now run over the WAP APN on Vodafone as they have tweaked the firewall

Does anyone know if I need to change any settings on AT&T? I love the graphics of this app, but it won't initiate its own internet connection. I have to check email or use the browser first to get the weather to update. I looked at SPB forums and no one knows why. Tried re-installing, but that didn't help either.

Thanks alot guys
Your help is greatfully appreciated.
for anyone who shares the problem:
On your Xperia go to....
settings
then select the connections tab
then the connections icon
followed by the advanced tab
Now chosse the select networks button and in the top drop down menu (the connection for programs which automatically connect to the net to use) and change it to "WEB" rather than "My ISP".
Then you need to set up mms again otherwise you wont be able to send messages
Setting up MMS
1. From the main display Tap the Start tab.
2. Tap on Settings.
3. Tap the Connections Tab at the bottom of the Screen.
4. Tap on Connections Icon.
5. Tap on the Advanced Tab,
6. Tap the Select Networks button,
7. Tap on New… under the upper drop-down box,
8. Enter a name for the connection in the box, Enter Vodafone MMS.
9. Tap the Modem tab, and then Tap New…
10. Enter a name for the connection in the box, Enter Voda MMS.
11. Tap the Arrow icon in select modem box, Tap Cellular line (GPRS, 3G).
12. Tap Next.
13. In the Access point name Box, and enter:
for Pay monthly customer: wap.vodafone.co.uk
for Pay as you Talk customer: pp.vodafone.co.uk
14. Tap Next.
15. In the User Name Box, Enter wap
16. In the password Box, Enter wap
17. The Domain should be left blank
18. Tap on the Advanced button,
19. Tap to select Use Server assigned IP Address,
20. Tap OK in the top right hand corner of the screen.
21. Tap Finish,
22. Tap OK in the top right hand corner of the screen.
23. On the Network management page, tap the Arrow icon below “programs that
automatically connect to the internet should connect using” and select My ISP or My
Gprs.
24. Tap OK in the top right hand corner of the screen three times.
25. From the standby screen Tap Start, then Messaging, then SMS/MMS,
26. Tap Menu, then select MMS Options,
27. Tap the servers tab and then the default option (vodafone MMS) by clicking on it once,
38. Change the Connect via box to Vodafone MMS,
32. Tap done.
this should fix the mms problem and allow the panel to update without proxy

artesea said:
Sounds like you are using the Vodafone WAP settings to surf the web (classed as MyISP). This tends to block most requests that aren't done via a browser* and instead you should use Vodafone Internet settings (classed as WEB).
*that said quite a lot off apps now run over the WAP APN on Vodafone as they have tweaked the firewall
Click to expand...
Click to collapse
Can you please confirm if vodafone live stops working after changing from my ISP to WEB

Settings on O2

Having a few problems
currently own a HTC HD2 but 02 dont have this phone yet but i currently have a 02 sim in it and they have no wap or 3g settings for it. Is there a way to manualy imput the internet settings into the phone as 02 have given the settings to me but they have no idea how to manualy imput them as they cant see the menus on the phone but here as XDA im sure you can help..

no need for any of that mate - just plug it in and away it goes
the HTC connection manager kicks in when you first bootup, it'll recognise you have an o2 sim and ask you to if it can configure the device - simple as

Before getting my HD2 unlocked today I was using an O2 PAYG sim. The autoconfigure on the O2 HD2 doesn't work for PAYG settings only contract settings.
I contacted O2 and they sent me the details which I have included below. It takes a bit of following and isn't 100% described correctly, but they do work properly when set up :-
GPRS setup
• Go to Start > Settings > Connections > Connections Icon > Advanced (Tab) > Select Networks (Button)
• You should now be on a screen titled “Network Management”. Now select both drop boxes to “My Work Network” then tap OK
• You now need to tap the Tasks tab and then the “Manage existing connections” link
• From here, tap the New button
• Name the new connection “O2 GPRS” and select modem as “Cellular Line (GPRS)” then tap Next
• You will now asked for the Access point name, here you should enter: “payandgo.o2.co.uk”, then tap Next
• You will now be asked for the username and password. The username is “payandgo”, and the password is “password”
• Ignore the Domain box and ignore the Advanced button, just tap Finish
• You will now be presented with a screen with your connections listed. Simply tap “O2 GPRS”. (There will now be a dot besides the name “O2 GPRS”. There may be other connections, you can delete if you wish. You also may have an “Auto pick” option, do not select this)
• You now need to tap the Proxy Settings tab (make sure the on-screen keyboard is not hiding this)
• On this screen you need to make sure that both the “This network connects to the Internet”, and “This network uses a proxy server to connect to the internet” tick boxes are both ticked
• In the Proxy server box below the tick boxes, enter: “193.113.200.195”
• Now tap the “Advanced” button
• Tap HTTP, enter server as “193.113.200.195”, port: “8080”, tap OK
• Tap WAP, enter server as ”193.113.200.195”, port: “9201”, tap OK.
• Leave Secure WAP blank (if there is anything in this entry, delete it)
• Tap Socks, enter server as “193.113.200.195”, port: “1080” and the type as “Socks 4”, then tap OK
• Tap OK 3 more times. Then tap X
• Now launch Mobile Internet Explorer to test the new settings
MMS setup – ensure GPRS settings are completed
· Select 'Start' > Select 'Messaging' > Select 'Menu' > Select 'MMS Configuration' or ‘tools’ > Select 'Servers' tab > Select 'New'
· Type in Server name or 'O2 MMS'
· Select 'Gateway' and type in '193.113.200.195'
· Select 'Port number' and type in '9201'
· Select 'Server address' and enter 'http://mmsc.mms.o2.co.uk:8002'
· Select 'Connect via' and select 'My Work Network''
· Click 'OK'
· Highlight 'O2 MMS' and click on 'Set As Default'

Big thanks
Ah thanks Axemcop great help and once again thanks mate nd this will be one of those questions people will be pleased to hear answered as im sure alot of people will want to know this.. cheers mate

No problem mate, glad it sorted it for you.

Hotspot workaround - Oreo updates

This method was borrowed from another thread.
Thanks to @heathmcabee and @daddymikey1975
Open quick shortcut maker
Enter "test" into the search box (without quotes)
Select the last entry (com.test.LTEfunctionality)
Once it expands, select the last entry
Tap on "try"
Scroll to and select the entry that says "APN setting"
Tap the entry that's already selected (blue dot)
- COPY / SCREENSHOT ALL SETTINGS -
- TAP BACK AND SELECT THE TOP RIGHT CORNER AND CREATE A NEW APN -
- COPY ALL SETTINGS OVER EXCEPT APN TYPE -
Scroll down to "APN type"
Tap the box and change it to read "default,mms,dun"
Make sure there's no quotes or spaces.
Tap the three dot menu on the very top right and select save.
SELECT THE NEW APN YOU CREATED
PROFIT

My sister updated her phone and I did think and it worked but I have a question, do you have to make a new APN every single time or does it stay saved

natejames11 said:
My sister updated her phone and I did think and it worked but I have a question, do you have to make a new APN every single time or does it stay saved
Click to expand...
Click to collapse
It stays saved, but a reboot or network change will revert you to the default apn. She will need to run the shortcut app and change it back to the new APN she created when that happens, but she won't need to make a new one.

???
Once it expands, select the last entry. What exactly does your last entry say that you select?

wwoodrum said:
This method was borrowed from another thread.
Thanks to @heathmcabee and @daddymikey1975
Open quick shortcut maker
Enter "test" into the search box (without quotes)
Select the last entry (com.test.LTEfunctionality)
Once it expands, select the last entry
Tap on "try"
Scroll to and select the entry that says "APN setting"
Tap the entry that's already selected (blue dot)
- COPY / SCREENSHOT ALL SETTINGS -
- TAP BACK AND SELECT THE TOP RIGHT CORNER AND CREATE A NEW APN -
- COPY ALL SETTINGS OVER EXCEPT APN TYPE -
Scroll down to "APN type"
Tap the box and change it to read "default,mms,dun"
Make sure there's no quotes or spaces.
Tap the three dot menu on the very top right and select save.
SELECT THE NEW APN YOU CREATED
PROFIT
Click to expand...
Click to collapse
Hi- would love for this to work... I'm on CRC5 ... am I screwed? the "add" button appears grayed out... so I can't seem to add a new APN to choose... have I messed up somehow?

This does not work because the APN settings have been disabled and no such way to add a new one and if you did there is no way to select it because all the functions in the APN settings have been disabled like I said before, only way to change them after OREO is to get root and then you can edit the system telephony.db file to add DUN.

wwoodrum said:
This method was borrowed from another thread.
Thanks to @heathmcabee and @daddymikey1975
Open quick shortcut maker
Enter "test" into the search box (without quotes)
Select the last entry (com.test.LTEfunctionality)
Once it expands, select the last entry
Tap on "try"
Scroll to and select the entry that says "APN setting"
Tap the entry that's already selected (blue dot)
- COPY / SCREENSHOT ALL SETTINGS -
- TAP BACK AND SELECT THE TOP RIGHT CORNER AND CREATE A NEW APN -
- COPY ALL SETTINGS OVER EXCEPT APN TYPE -
Scroll down to "APN type"
Tap the box and change it to read "default,mms,dun"
Make sure there's no quotes or spaces.
Tap the three dot menu on the very top right and select save.
SELECT THE NEW APN YOU CREATED
PROFIT
Click to expand...
Click to collapse
So this was working wonderfully for me for the whole day then tonight im watching a youtube video and the internet just goes out. ive got wifi and its connected but its saying no internet. Any ideas?
---------- Post added at 07:19 AM ---------- Previous post was at 06:52 AM ----------
Try This:
-follow the instructions here and copy everything like they said to do.
-disable Hotspot tether & mobile data
-now enable hotspot tether(wait until its fully turned on)
-now enable mobile data once hotspot tether is turned on