HI All I have a moto G7 X1962-1 which I tried to root, and failed. I unlocked the bootloader, and did that correctly. I tried to use magisk to make a new boot img and when I installed it, it became stuck in this boot loop.
I can connect to it in fastboot with powershell, but the device doesnt show up on my device manager.
It was completely deleted, and I did manage to get the "boot.img" onto one of the slots, and went through a step by step of wiping everything else.
I located the factory ROM and have it to install and it will not install. In the PS command line everything says it installed ok, but it still hangs in the boot loop with the "bad key" image from the unlocked bootloader, but now it doesnt even show the mortorola logo. I have gone through several threads on this site and nothing seems to make it boot.
I haven been messing with this thing for 2 days, can anyone help me?
Related
Bottom half of the screen is cracked which makes it very difficult to " swipe to" do anything in TWRP. I locked my device and was unable to unlock with backup pin because the keyboard does not function properly. So I rebooted into recovery and accidentally wiped Calvin Cache, System, Data, Internal Storage and Cache. Rebooted phone and it's stuck in a boot loop. I tried using adb but I could not get it to swipe into adb sideload. I found that connecting the phone to my PC does open up /SDCARD/TWRP but there are no other folders in /SDCARD. I moved a ROM from my PC to the TWRP folder and was able to flash it but got stuck in boot loop. Tried flashing a different ROM and it shows a new loading screen but still stuck in boot loop. No other folders are being created to SDCARD.. Haven't had this pphone for more than a week.... Was thinking I could maybe flash a non touch TWRP or CWM to avoid having to swipe to get things done and use the hardware keys.. but why is it being stuck in boot loop after it says it successfully flashed the ROM.
I did flash the 30b file it says to flash prior to flashing the 2 custom lollipop ROMs in the tmo dev forum. Any help, links, advise would be much appreciated. Thanks.
I am having a problem with my OnePlus two device. I used qcom download tool on my device, because my OnePlus two didn't want to reset. So after qcom download tool was done My phone rebooted and stayed in a boot logo. I tried It again and again and so on. After doing that a lot over and over I thought It could fix it, I got the same output over and over. My phone got the OS completely wiped and the recovery. The only thing that works is fastboot mode. I get now is the boot loop. I've tried everything and nothing has helped.
I have tried to fix it the hard way but my OEM is locked so I have no luck.
• (fastboot continue) I've tried it I got nothing out of it.
does anyone have a solution to fix this problem.
fd
Hello,
You bricked your phone. Use this guidr step by step, it works 100%
http://forum.xda-developers.com/oneplus-2/general/guide-unbrick-recover-oneplus-2-to-t3269543
Try boot with recovery image (fastboot > boot recovery.img), I got unlocked boot loader even after a reset (using qcom tool).
Hi,
I have been using my P Smart (FIG-LX1) for a while with LineageOS 16 and decided to move on to Android 10. Installed LineageOS 17.1 (found it on this forum) and pph-Magisk 20.3 for root - it did work, but the system was unstable so i decided to try AOSP 10.0 instead. I entered TWRP, wiped cache,dalvik,system and data, flashed the ROM, gapps etc. It was advised to now flash stock recovery and use it to do a factory reset - and now i'm stuck here.
After flashing the recovery_ramdisk img the phone stopped being able to enter any recovery at all. The system itself does not boot (stuck on the "Your device has been unlocked (...) Your device is booting now..." screen forever), the recovery never appears (previously in the start screen with 'unlocked device' warning it used to suggest pressing volume UP to enter recovery, now it only shows "Your device is booting now"). As i can still access fastboot, I tried flashing TWRP again - the TWRP splash screen does appear, but the phone gets stuck on it. Also tried flashing another system's img - nothing changed.
Is there anything I can do or did i just brick it completely?
Thanks for help!
SOLVED:
Apparently running fastboot erase on system and userdata partitions made me able to boot into recovery/erecovery again. I do have another problem now, but it's not connected with this one so I will create another thread for that.
Could you try help me? I can't even get ADB to work anymore
Hi all,
I hope someone can guide me through. My MI A1 device has suddenly stopped booting for no reason. To fix up I tried many thing but with no luck.
here is link to one of the thread I have followed
Reddit thread
This guy exactly had the same issue as mine but on different model and I followed all the instruction as in this thread.
Summary of things I tried so far (Including instructions from the thread I mentioned) :
- Try mi flash tool to flash stock rom (Which succeeds and nothing actually works )
- Tried my luck with lineage os 17 and GPAPPS but no luck. (Interestingly, when I Install LOS and I the reboot device, it boots in LOS recovery fine but when I try to boot system it just keep rebooting and then finally stops at charging screen.)
PS. One more observation, when I flash it with MIflash tool with stock rom and it boots up for the first time, an intermediate screen with circle logo and erasing text appears just like when we get update screen not sure why!
Guys, this is my last bet on XDA. I almost wasted my whole day searching for solution on #Youtube and other forums, nearly read a ton of things but still no luck!
Please Help!
UPDATE :
Here is a little more progress,
So, I tried flashing the original stock rom boot image with fastboot
Code:
fastboot flash boot boot.img
and as usual first it just got rebooted with no luck but later somehow booted the device. I tried the same with recursion OS ROM and then again flashed boot image and just like prev attempt it rebooted first & then booted normally.
Also, when device was booted normally, I received a call and when I tried to pick it, It just got rebooted and I am where I started!
I really don't get the point why it boot when I manually boot it with fastboot and its not able to boot itself.
Anyone knows, why this is happening? Is there a way to clean whole and then install? am I doing something wrong here?
Update :
Yes, confirmed when I flash the boot image from fastboot it does boots up. the only problem is after a few seconds/minutes it just reboot and goes back to problematic state.
This thing is really pissing me off! Can someone help?
Update:
After a few more attempts now, it seems like the device is completely broken! It only boots up in fastboot and does not even boot in recovery ( Volume up + Power)
I also tried with pushing twrp recovery image with fastboot but even though the command succeeds the device just reboots with MI logo continuously.
I had already installed TWRP and decided to wipe the whole data from my phone, thinking that it's going to be the same as a factory reset because I want to reset my phone. Phone startup went well, no hiccups or anything. Then I decided to flash TWRP again. But I never managed to actually install it. I follow the manuals from here and here, but I somehow always can't boot into the recovery. I use the same ADB and fastboot I used to install TWRP from before. Flashed .img, reboot, can't enter the recovery, starts over again, and this goes on and on. Until now, whenever I want to boot normally, I keep getting stuck at the "Zenfone" logo screen. The only different thing that I could think of that caused this is when I decided to use Universal ADB Helper, because maybe it'll work there i thought, and I flash the twrp.img using the "Flash Recovery via fastboot" command. If there's anything that could help me, even if it meant resetting the phone again, I'd very much appreciate it.