Database Users

[ROM] CM-12.1 for Meizu M2 Note [5.1.1]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1(LP), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it!
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Unofficial build of CyanogenMod 12.1 (Android 5.1.1) for the M2 Note​
Working:
Everything :victory:
Hardware acceleration
SELinux enforced
RIL for SMS/Calls/Internet
GPS
WiFi
Vibration
Audio
Bluetooth / A2DP
MTP and Mass Storage mode
External SD
Camera (Videos & Photos)
All Sensors
Tethering
USB Otg
Gestures!
mBack button!
LiveDisplay (natively smooth)
Download:
Build 15 (Stable 3 "Elpun") : Download
/! Make a backup, This build needs a full wipe /!
[security] November Security Bulletin from CM
[usb] Charge Only can be enabled (and usb can be renabled)
[fix] Zram should be working correctly now (reduces longterm slowdowns)
[camera] Recording in stereo should work now (Thanks @goodoane)
[kernel] security feature : now uses CC_STACK_PROTECTOR_STRONG, more info
[signed-build] the build is now using release-keys instead of public "test-keys" meant for debug, improves a bit security and fixes some bugs in Google Apps (ex: Android Wear refusing to work, asking for an "user/signed" or "userdebug/unsigned" rom)
Build 14 (Stable 2 aka "Ololo") : Download
/! Make a backup, dirty update works but if not, do a clean wipe or don't complain about bugs/crash/FC/whatever /!
[security] Dirty COW fixed (CVE-2016-5195)
[battery] small improvements, battery stats should be more accurate
[stability] Clock wakelocks should be fixed
[improvement] built as user instead of userdebug (rom size is a bit smaller, less logs)
[SafetyNet] is properly "suported", banking apps and pokemon Go perfectly works without installing anything else (no more systemless root, xposed or w/e to make it work )
[kernel] general updates (3.10.104)
Build 13 (Stable 1 aka "Olala") : Download
/! Make a backup and do a clean wipe or don't complain about bugs/crash/FC/whatever /!
[LiveDisplay] is now natively working (perfectly smooooooth)
[kernel] general updates, security updates, cleanup, Live Display Implementation
[stability] CM updates
[usb] Charging mode only should work correctly when plugged in usb.
[decoder] AwesomePlayer is now enabled by default instead of NuPlayer (known to cause Google Photos crash, etc.)
[gestures] CMActions is now correctly using Russians strings, Spanish translation added.
[misc] root should be allowed from Dev Options now, anyway if not, flash SuperSU
Build 12 (Release Candidate 2) : Download
/! Make a backup and wipe /system before you flash this RC to be sure you got rid off the ANT+ files /!
This RC2 will probably be renamed "stable 1" if no major problem arise.
[kernel] general updates, cleanup , disabled KSM & UKSM for battery performance
[removed] ANT+ was only partially working and caused battery drain (it seems)
[battery] disabled both ANT (see above) and a few unneeded kernel features that might have caused a bit of draining issues, this should be better now ! :good:
[stability] overall cleanup (overlays, values, etc..)
[gestures] CMActions was cleaned and a few bugs were fixed, the gestures are now enabled/disabled by a switch but remains customisable when you press on them :good:
[misc] adb is not root by default anymore (this might help those who play PoGo) use the dev settings to change that
Build 11 (Release Candidate 1) : Download
(I told you I wouldn't release a beta next time)
changelog :
[bugfix] wifi hotspot is working (both in secured and unsecured AP mode)
[bugfix] fix the back button not being active at first touch when home was pressed to wake the device (elexogic)
[bugfix] back button vibration renabled
[improvement] Gestures are fully customisable now, choose what app/action is triggered (thanks elexogic again)
[kernel] general updates, config_aio disabled for security
[battery] IOscheduler reverted to "deadline" for better battery life
[stability] wifi, mobile, bluetooth, gps stability improved (blobs update to 5.1.10G)
Build 10 (latest beta before stable ) :
Download
(changelog : trully fixed back button for all M2 Note variants)
Issues
Data on second sim in a dual-sim configuration. (hardware limitation)
If you find a bug please check if there's no issue already mentioning it and create one with details and logs here : Bug reports @ Github issues
BUT FIRST :
Do a clean install first, wipe everything.
Make sure you don't use modifications (flash clean, try again)
Check the closed issues
Check google first, there might already be solutions
Explain and give details, add logs as much as possible
How to install:
It's usually a good idea to download the newest build version. Just install it via recovery. I tested it on TWRP but it should also work on other recoveries.
You will also need gapps if you want to use Google services. stock OpenGApps - use the arm64 versions.
How to install TWRP - I don't support unlocking bootloader, installing TWRP or the ROM, you should know what you do first or start learning.
Sources:
Device Tree: https://github.com/Moyster/android_device_meizu_m2note
Kernel: https://github.com/Moyster/android_kernel_m2note
Thanks to:
@BlueFlame4
@Elexogic for his fixes on back button and gestures
@scafroglia93 for his kernel updates
Meizu & Mediatek for releasing their sources!
Appendix:
If you want to mirror the files or port the ROM to another device, I encourage you to do so! Only please respect my work and give proper credits. Thank you!
XDA:DevDB Information
[STABLE] CM-12.1 for Meizu M2 Note [5.1.1], ROM for the Meizu MX
Contributors
Moyster, BlueFlame4, Elexogic, Everyone I forgot, those who translated the gestures modules (Alex Lartsev (RU), LBA97 (ES))
Source Code: http://github.com/Moyster
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: No Longer Updated
Current Stable Version: Stable two
Stable Release Date: 2016-11-09
Created 2016-09-10
Last Updated 2017-02-05

Great job was visiting your github daily downloading now
Sent from my M2 Note using XDA-Developers mobile app

Thanks a lot for hard work!
You could add a link for the recovery twrp?
Inviato dal mio m2 note utilizzando Tapatalk

ro11er said:
Great job was visiting your github daily downloading now
Sent from my M2 Note using XDA-Developers mobile app
Click to expand...
Click to collapse
Sent from my M2 Note using XDA-Developers mobile app

ro11er said:
Sent from my M2 Note using XDA-Developers mobile app
Click to expand...
Click to collapse
done

Moyster said:
done
Click to expand...
Click to collapse
Moyster nega quota exceeded any chance of uploading somewhere else?
Sent from my M2 Note using XDA-Developers mobile app

Good job ...thanks you

COOL JOB!!!!!!
THX
Please port MIUI rom the M2 Note........
Soory my bad English!!
Grat!
The new cm 12.1 rom!!!

Thanks for hard work.

:< My SIM1 tray was broken, I won't be able to use this rom.
Anyway, thanks for your hard work.

ro11er said:
Moyster nega quota exceeded any chance of uploading somewhere else?
Sent from my M2 Note using XDA-Developers mobile app
Click to expand...
Click to collapse
I don't really have time to post it anywhere else now, if someone is kind enough to do it, you're welcomed
I'll try to find a way and have them online, maybe OTA too, if anyone is kind enough to host all that ^^
qamu74 said:
COOL JOB!!!!!!
THX
Please port MIUI rom the M2 Note........
Soory my bad English!!
Grat!
The new cm 12.1 rom!!!
Click to expand...
Click to collapse
I don't port roms, sorry.
Next step :
1. fixing bluetooth
2. stable CM-12.1 release
3. CM13

Moyster said:
I don't really have time to post it anywhere else now, if someone is kind enough to do it, you're welcomed
I'll try to find a way and have them online, maybe OTA too, if anyone is kind enough to host all that ^^
I don't port roms, sorry.
Next step :
1. fixing bluetooth
2. stable CM-12.1 release
3. CM13
Click to expand...
Click to collapse
OH cm13 Very COOL!
Good Job Bro.!!!!

fantasticlord said:
:< My SIM1 tray was broken, I won't be able to use this rom.
Anyway, thanks for your hard work.
Click to expand...
Click to collapse
Good to know, I didn't try both slots but it will be fixed that's why it's a beta and reviews are welcome, I can't test everything alone

Nice!

Moyster sim not detected in sim2. Unfortunately on my way out and need phone when back will get catlog.
Sent from my M2 Note using XDA-Developers mobile app

My sim isn't recognized and the m-back button is off. Will you fix this bugs?
Enviado desde mi m2 note mediante Tapatalk

ro11er said:
Moyster sim not detected in sim2. Unfortunately on my way out and need phone when back will get catlog.
Sent from my M2 Note using XDA-Developers mobile app
Click to expand...
Click to collapse
Hello, I just fixed the second simcard I'll upload a clean build during the night so :
easy fix : wait tomorrow, flash beta 2
"I'm not gonna wait" fix : flash the rom, edit /system/build.prop
and delete the line :
(line ~148)
"persist.radio.multisim.config=dsdsro.mediatek.platform=MT6735"
Edit :
m-back button is off.
Click to expand...
Click to collapse
touch doesn't act for now, simple press is home, long press is "app drawer", It's not off, only back doesn't work, eventually will be fixed

Moyster said:
touch doesn't act for now, simple press is home, long press is "app drawer", It's not off, only back doesn't work, eventually will be fixed
Click to expand...
Click to collapse
Please try to repair the touch, it is a very useful feature!
Thanks a lot for your work!
Inviato dal mio m2 note utilizzando Tapatalk

Moyster said:
Hello, I just fixed the second simcard I'll upload a clean build during the night so :
easy fix : wait tomorrow, flash beta 2
"I'm not gonna wait" fix : flash the rom, edit /system/build.prop
and delete the line :
(line ~148)
"persist.radio.multisim.config=dsdsro.mediatek.platform=MT6735"
Edit :
touch doesn't act for now, simple press is home, long press is "app drawer", It's not off, only back doesn't work, eventually will be fixed
Click to expand...
Click to collapse
Are you gonna fix the back function for tomorrow's update?
Enviado desde mi m2 note mediante Tapatalk

Great job...
The ROM work fine... My second Sim is recognized but only works on "edge" or GSM and the internet connection speed is too slow..

Rom 5.0.2 MIUI9 7.9.14 MiuiPRO beta For Meizu M2/Mini

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credits Romul35 Developed It for Our Meizu M2/mini
Qus 1 Custom kernel expert thanks for its custom Kernel
Xiaomi has unveiled MIUI 9, the much-anticipated new version of its MIUI custom Android ROM. MIUI 9 is based on Android 7.0 Nougat, and apart from Nougat features like split screen, it boasts of faster app launch times, a more dynamic resource allocation for a fluid experience, and other smart features and improvements. As for the question you're probably itching to know the answer to - when will you be able to download MIUI 9? August 11, says Xiaomi, but more on that later.
Code:
[SIZE="5"][B][COLOR="Cyan"]Installation[/COLOR][/B]
1. Take care of backup of the system and data in advance!
2. Installation is carried out through the recommended TWRP!
3. Download the downloaded firmware file on internal memory or MicroSD.
4. Boot into the recovery.
5. Select the "Clean" tab and then "Custom" to mark Dalvik / ART Cache, Cache, System, Data and move the slider "Run" to the right.
6. Go to the "Installation" tab and select the firmware archive.
7. Confirm the desire to flash with the slider.
8. After successful execution of the script, auto-reloading to the system will follow.
9. Downloading is long, have patience and wait until the start menu appears.
10. Customize the system to fit your needs.[/SIZE]
Works
- Communication
- Wi-Fi
- Bluetooth
- Mobile Internet
- Sensors
- Video
- Camera
- Autofocus
- Flashlight
- Wake-up button "HOME"
Detailed Changelog
https://miuipro.by/obnovleniya-miuipro-7-9-14-opublikovanyi/
Use Google translate to read it
Do Not Work
- Slow motion
Bugs Found by me and by my friends
1)While listening Audio from Whatsapp System UI Crashes.
2)While Rebooting device or rebooting it to recovery it switches off in Deep Sleep by 3rd party apps to just simply hold power button and volume up button it will boot up in recovery or boot phone normally by holding power button.
3)Brightness Increases itself (Fixed in Custom Kernel)
Some Suggestions by me
You may find rom bit laggy after installing apps dont worry
just go to setting enable developer options first and then go to developer option and drag to last options in last you will find option like "Memory Optimization" Just turn it off and reboot your device you will get Lagless performance But will reduce Battery backup
Use Custom kernel in this rom i suggest it it will fix battery bug if you customize it well
and will solve brightness automatic increase bug Thanks Qus 1 For it
Rom Version:-Android 5.0.2
Rom Status:-Under Development
Screen Shots
[url]https://drive.google.com/open?id=0Bz6Fq2POoJTlOEd3NmZOZ3l3Wms[/URL]
Download Links
Rom
http://www.mediafire.com/file/y9etctoh4azcday/MIUI9_M2MINI_MPRO_15.09.17_7.9.14.zip
G-Apps
Go to [url]opengapps.org[/URL] there select arm 64 android 5.0.2 and pico and download it
Qus 1 Custom Kernel
[url]https://yadi.sk/d/uOLjvqM33MYPtu[/URL]
Open Sources By Devis 1969
Kernel Sources :good: :good:
[url]https://github.com/divis1969/android_kernel_meizu_meilan2[/URL]
Vendor Blobs :good: :good:
[url]https://github.com/divis1969/android_vendor_meizu_meilan2[/URL]
Device Tree :good: :good:
[url]https://github.com/divis1969/android_device_meizu_meilan2[/URL]
Don't Forget To Press Thanks if you like it :good: :good:
Regards~
Murtaza Piplod

Thank you so much for sharing, but..
murtaza1326 said:
Xiaomi has unveiled MIUI 9, the much-anticipated new version of its MIUI custom Android ROM. MIUI 9 is based on Android 7.0 Nougat
Click to expand...
Click to collapse
I'm sorry, Android 7?

ChakibDEV said:
Thank you so much for sharing, but..
I'm sorry, Android 7?
Click to expand...
Click to collapse
it's universal discription for miui 9 i already have written android version it's 5.0.2

post updated with latest download links enjoy

I'm using it as my daily driver I really like this ROM. But I couldn't install Xposed, it gets stuck at boot. I had to install an alternative to the huge stock navigation bar. I don't use Swype because it interferes easily with the keyboard when writing

ChakibDEV said:
I'm using it as my daily driver I really like this ROM. But I couldn't install Xposed, it gets stuck at boot. I had to install an alternative to the huge stock navigation bar. I don't use Swype because it interferes easily with the keyboard when writing
Click to expand...
Click to collapse
I'm using miui 8 at the moment and miui 9 before. If I don't remember wrong, xposed works okay with miui 9. I will try miui 9 with xposed and report back if it works or not.

irt118 said:
I'm using miui 8 at the moment and miui 9 before. If I don't remember wrong, xposed works okay with miui 9. I will try miui 9 with xposed and report back if it works or not.
Click to expand...
Click to collapse
Thank you so much. I tried the last 3 versions but no success. Always stuck at boot. I wiped dalvik cache of course. It takes time to generate odex files but not that much.

Brightness increase self
I use custom kernel for fix bug brighness increase self,, but its not work.
I pull left, but its change self.
Are you same this??
*Sorry, bad english

my problem is weird one it was in all miui 8 rom and now on miui 9 also
The problem is when I use single sim with jio my jio4gvoice always say connecting or offline but when I use dual sim jio4gvoice shows online. I tried every possible solution i.e add apn, change to manual network, etc etc nothing works.
This bug is only present in all miui rom. All the flyme rom and nougat base rom works very well.
Please can anybody post any solution.

apri_setiawan said:
I use custom kernel for fix bug brighness increase self,, but its not work.
I pull left, but its change self.
Are you same this??
*Sorry, bad english
Click to expand...
Click to collapse
Yes when I'm in a well lit environment it increases a little bit and there's no way to change that. When I turn the lights off it stays at minimum. But I like this feature actually. It saves me when I'm outside with the brightness set to minimum.

ChakibDEV said:
Thank you so much for sharing, but..
I'm sorry, Android 7?
Click to expand...
Click to collapse
I have flashed miuipro 9 in my meizu m2 mini, its running great except the battery draining issue. Which custom kernel should I flash to shoot this battery draining issue?
---------- Post added at 02:11 PM ---------- Previous post was at 01:43 PM ----------
murtaza1326 said:
Credits Romul35 Developed It for Our Meizu M2/mini
Qus 1 Custom kernel expert thanks for its custom Kernel
Xiaomi has unveiled MIUI 9, the much-anticipated new version of its MIUI custom Android ROM. MIUI 9 is based on Android 7.0 Nougat, and apart from Nougat features like split screen, it boasts of faster app launch times, a more dynamic resource allocation for a fluid experience, and other smart features and improvements. As for the question you're probably itching to know the answer to - when will you be able to download MIUI 9? August 11, says Xiaomi, but more on that later.
Code:
[SIZE="5"][B][COLOR="Cyan"]Installation[/COLOR][/B]
1. Take care of backup of the system and data in advance!
2. Installation is carried out through the recommended TWRP!
3. Download the downloaded firmware file on internal memory or MicroSD.
4. Boot into the recovery.
5. Select the "Clean" tab and then "Custom" to mark Dalvik / ART Cache, Cache, System, Data and move the slider "Run" to the right.
6. Go to the "Installation" tab and select the firmware archive.
7. Confirm the desire to flash with the slider.
8. After successful execution of the script, auto-reloading to the system will follow.
9. Downloading is long, have patience and wait until the start menu appears.
10. Customize the system to fit your needs.[/SIZE]
Works
- Communication
- Wi-Fi
- Bluetooth
- Mobile Internet
- Sensors
- Video
- Camera
- Autofocus
- Flashlight
- Wake-up button "HOME"
Detailed Changelog
https://miuipro.by/obnovleniya-miuipro-7-9-14-opublikovanyi/
Use Google translate to read it
Do Not Work
- Slow motion
Bugs Found by me and by my friends
1)While listening Audio from Whatsapp System UI Crashes.
2)While Rebooting device or rebooting it to recovery it switches off in Deep Sleep by 3rd party apps to just simply hold power button and volume up button it will boot up in recovery or boot phone normally by holding power button.
3)Brightness Increases itself (Fixed in Custom Kernel)
Some Suggestions by me
You may find rom bit laggy after installing apps dont worry
just go to setting enable developer options first and then go to developer option and drag to last options in last you will find option like "Memory Optimization" Just turn it off and reboot your device you will get Lagless performance But will reduce Battery backup
Use Custom kernel in this rom i suggest it it will fix battery bug if you customize it well
and will solve brightness automatic increase bug Thanks Qus 1 For it
Rom Version:-Android 5.0.2
Rom Status:-Under Development
Screen Shots
[url]https://drive.google.com/open?id=0Bz6Fq2POoJTlOEd3NmZOZ3l3Wms[/URL]
Download Links
Rom
http://www.mediafire.com/file/y9etctoh4azcday/MIUI9_M2MINI_MPRO_15.09.17_7.9.14.zip
G-Apps
Go to [url]opengapps.org[/URL] there select arm 64 android 5.0.2 and pico and download it
Qus 1 Custom Kernel
[url]https://yadi.sk/d/uOLjvqM33MYPtu[/URL]
Open Sources By Devis 1969
Kernel Sources :good: :good:
[url]https://github.com/divis1969/android_kernel_meizu_meilan2[/URL]
Vendor Blobs :good: :good:
[url]https://github.com/divis1969/android_vendor_meizu_meilan2[/URL]
Device Tree :good: :good:
[url]https://github.com/divis1969/android_device_meizu_meilan2[/URL]
Don't Forget To Press Thanks if you like it :good: :good:
Regards~
Murtaza Piplod
Click to expand...
Click to collapse
How to customize after flashing this custom kernel said in the post to shoot battery draining issues? please guide me

AnjanDas said:
I have flashed miuipro 9 in my meizu m2 mini, its running great except the battery draining issue. Which custom kernel should I flash to shoot this battery draining issue?
---------- Post added at 02:11 PM ---------- Previous post was at 01:43 PM ----------
How to customize after flashing this custom kernel said in the post to shoot battery draining issues? please guide me
Click to expand...
Click to collapse
I have MIUI9 as-it-is. I didn't flash any custom kernel and the battery last longer in this ROM than any other one (RR, other LOS-based ROMs and even flyme). I think the apps you're using are the ones draining your battery.

anyone use MIUI 9 Pro stable??
I got link from 4pda.
N I want use custom kernel, but magisk not active / not root.
I think this custom kernel not for stable version..

Update kernel link please.

anyone here still have the custom kernel? please reupload it

[INDEX] List of ROMs for Y6(2018)

Hi guys! This is a compilation of working and non-booting Treble Oreo ROMs for Huawei Y6 (2018). Full list of Treble Project ROMs is here. This list is still incomplete as I have not tested all ROMs listed in the link above. Therefore, if anyone tried a custom ROM not listed on this thread, please post it here so I can update this thread.
Please do note that I am not a ROM developer, you can still post bugs here so others will know and also on the ROM thread so we can hope for fixes.
We should thank @phhusson for all the works he's done to Project Treble
Project Treble ROMs are ROMs that are built to support as many devices as possible that support Treble. Treble devices, usually ship with Android Oreo pre-installed, therefore, our Huawei Y6 (2018) should technically boot any GSI/Treble ROM. But still, custom GSI ROMs are still not perfect and some devices may have bugs and some devices may not be unable to boot a particular ROM at all
Please read the wiki here about Y6 first
Prerequisites:
unlocked bootloader
adb and fastboot installed on your computer
How to flash ROMs for our device?
Before flashing, follow my guide HERE so you can always go back to stock ROM just in case. Also, make sure you downloaded an ARM64 A only image. This procedure erases your files so have a backup of your important files
Some ROM threads provide downloads in .zip file or in tar.xz file instead of .img files to save internet usage. Install 7-zip on Windows, open the file and extract the flashable .img file
1. Plug your device to the computer and reboot to download mode using this command:
Code:
adb reboot bootloader
2. Flash your desired ROM using this command:
Code:
fastboot flash system <ROM file here, should be a .img file>
3. Reboot!
Code:
fastboot reboot
4. When you see the warning "Your device has been unlocked and can't be trusted", press the Volume up button and your device will go to erecovery. There, you can select Factory Reset
Usually, custom ROMs come with 2 variants:
Vanilla - this is a plain ROM with no GApps and su (root access)
GApps - a ROM with Google Apps (Play Store, etc.). Usually comes with root access too!
Here is the list of ROMs that are tested. Feel free to post ROMs that are working for our device
1. CrDroid by @Dil3mm4
2. LineageOS by @phhusson
3. OmniROM Treskmod by @Letzen
4. Resurrection Remix by @mracar
5. Pixel Experience by @jhenrique09
6.AOSP 8.1 - older than v25 ONLY!! by @phhusson Download the old version here
7.Bootleggers ROM by @Dil3mm4
8. Havoc OS 08/19 build by @
EnesSastim
9.Descendants threedotzero by @Dil3mm4
Tested not working:
1. AOSP Extended by @AryanPatidar - I only tried the latest version v5. 8, older versions may/may not work
2. AOKP by @sixohtew - I only tried the latest version, older versions may/may not work
3.AOSP v25 and later(?) by @phhusson

Ai ai ai, mine (OmniROM Treskmod) was meant to be work on Huawei anyway so it should work fine. Good luck, everyone.

pascua28 said:
Hi guys! This is a compilation of working and non-booting Treble Oreo ROMs for Huawei Y6 (2018). Full list of Treble Project ROMs is here. Feel free to test so that this list may be updated
We should thank @phhusson for all the works he's done to Project Treble
Project Treble ROMs are ROMs that are built to support as many devices as possible that support Treble. Treble devices, usually ship with Android Oreo pre-installed, therefore, our Huawei Y6 (2018) should technically boot any GSI/Treble ROM. But still, custom GSI ROMs are still not perfect and some devices may have bugs and some devices may not be unable to boot a particular ROM at all
The bugs for Y6 (2018) is found here :
Bootloop for all Android 9.0 ROM's
Bootloop for the latest AOSP 8.1 v25
Signal bar stays empty on h/h+ but works on e
GPS isn't working.
Prerequisites:
unlocked bootloader
adb and fastboot installed on your computer
How to flash ROMs for our device?
Before flashing, follow my guide HERE so you can always go back to stock ROM just in case. Also, make sure you downloaded an ARM64 A only image. This procedure erases your files so have a backup of your important files
1. Plug your device to the computer and reboot to download mode using this command:
Code:
adb reboot bootloader
2. Flash your desired ROM using this command:
Code:
fastboot flash system <ROM file here>
3. Reboot!
Code:
fastboot reboot
4. When you see the warning "Your device has been unlocked and can't be trusted", press the Volume up button and your device will go to recovery mode. There, you can select Factory Reset
Usually, custom ROMs come with 2 variants:
Vanilla - this is a plain ROM with no GApps and su (root access)
GApps - a ROM with Google Apps (Play Store, etc.). Usually comes with root access too!
Here is the list of ROMs that are tested. Feel free to post ROMs that are working for our device
1. CrDroid by @Dil3mm4
2. LineageOS by @phhusson
3. OmniROM Treskmod by @Letzen
4. Resurrection Remix by @mracar
5. Pixel Experience by @jhenrique09
Tested not working:
1. AOSP Extended by @AryanPatidar - I only tried the latest version v5. 8, older versions may/may not work
2. AOKP by @sixohtew - I only tried the latest version, older versions may/may not work
Click to expand...
Click to collapse
Try Aosp extended v5.4 and see if it boots up

AryanPatidar said:
Hi guys! This is a compilation of working and non-booting Treble Oreo ROMs for Huawei Y6 (2018). Full list of Treble Project ROMs is here. Feel free to test so that this list may be updated
We should thank @phhusson for all the works he's done to Project Treble
Project Treble ROMs are ROMs that are built to support as many devices as possible that support Treble. Treble devices, usually ship with Android Oreo pre-installed, therefore, our Huawei Y6 (2018) should technically boot any GSI/Treble ROM. But still, custom GSI ROMs are still not perfect and some devices may have bugs and some devices may not be unable to boot a particular ROM at all
The bugs for Y6 (2018) is found here :
Bootloop for all Android 9.0 ROM's
Bootloop for the latest AOSP 8.1 v25
Signal bar stays empty on h/h+ but works on e
GPS isn't working.
Prerequisites:
unlocked bootloader
adb and fastboot installed on your computer
How to flash ROMs for our device?
Before flashing, follow my guide HERE so you can always go back to stock ROM just in case. Also, make sure you downloaded an ARM64 A only image. This procedure erases your files so have a backup of your important files
1. Plug your device to the computer and reboot to download mode using this command:
2. Flash your desired ROM using this command:
3. Reboot!
Try Aosp extended v5.4 and see if it boots up
Click to expand...
Click to collapse
Have you tried? If so, I will add it to the list

pascua28 said:
Hi guys! This is a compilation of working and non-booting Treble Oreo ROMs for Huawei Y6 (2018). Full list of Treble Project ROMs is here. Feel free to test so that this list may be updated
We should thank @phhusson for all the works he's done to Project Treble
Project Treble ROMs are ROMs that are built to support as many devices as possible that support Treble. Treble devices, usually ship with Android Oreo pre-installed, therefore, our Huawei Y6 (2018) should technically boot any GSI/Treble ROM. But still, custom GSI ROMs are still not perfect and some devices may have bugs and some devices may not be unable to boot a particular ROM at all
The bugs for Y6 (2018) is found here :
Bootloop for all Android 9.0 ROM's
Bootloop for the latest AOSP 8.1 v25
Signal bar stays empty on h/h+ but works on e
GPS isn't working.
Prerequisites:
unlocked bootloader
adb and fastboot installed on your computer
How to flash ROMs for our device?
Before flashing, follow my guide HERE so you can always go back to stock ROM just in case. Also, make sure you downloaded an ARM64 A only image. This procedure erases your files so have a backup of your important files
1. Plug your device to the computer and reboot to download mode using this command:
Code:
adb reboot bootloader
2. Flash your desired ROM using this command:
Code:
fastboot flash system <ROM file here>
3. Reboot!
Code:
fastboot reboot
4. When you see the warning "Your device has been unlocked and can't be trusted", press the Volume up button and your device will go to recovery mode. There, you can select Factory Reset
Usually, custom ROMs come with 2 variants:
Vanilla - this is a plain ROM with no GApps and su (root access)
GApps - a ROM with Google Apps (Play Store, etc.). Usually comes with root access too!
Here is the list of ROMs that are tested. Feel free to post ROMs that are working for our device
1. CrDroid by @Dil3mm4
2. LineageOS by @phhusson
3. OmniROM Treskmod by @Letzen
4. Resurrection Remix by @mracar
5. Pixel Experience by @jhenrique09
Tested not working:
1. AOSP Extended by @AryanPatidar - I only tried the latest version v5. 8, older versions may/may not work
2. AOKP by @sixohtew - I only tried the latest version, older versions may/may not work
Click to expand...
Click to collapse
can u give me a list that in which devices u tested those roms? like atu-lxx?

nafis5566 said:
can u give me a list that in which devices u tested those roms? like atu-lxx?
Click to expand...
Click to collapse
I tested this on my ATU-L22 but the ROMs should work with any Y6 (2018) ATU-Lxx

pascua28 said:
I tested this on my ATU-L22 but the ROMs should work with any Y6 (2018) ATU-Lxx
Click to expand...
Click to collapse
was thinking about to go for the pixel experience but gps is really important thing. any suggestion? and what about the battery life?

nafis5566 said:
was thinking about to go for the pixel experience but gps is really important thing. any suggestion? and what about the battery life?
Click to expand...
Click to collapse
Nothing I can do about GPS as I'm not a ROM developer. Battery life is a bit less compared to stock

Thread updated!
Added Bootleggers and AOSP 8.1 to the list
Updated instruction for non img downloads

pascua28 said:
Nothing I can do about GPS as I'm not a ROM developer. Battery life is a bit less compared to stock
Click to expand...
Click to collapse
ok and should i download the generic version of pixel experience? ( https://download.pixelexperience.org/treble_gsi/ ) from here? and do u think those issues can be fixed in next updates?

nafis5566 said:
ok and should i download the generic version of pixel experience? ( https://download.pixelexperience.org/treble_gsi/ ) from here? and do u think those issues can be fixed in next updates?
Click to expand...
Click to collapse
Yes arm64 a. Maybe

pascua28 said:
Yes arm64 a. Maybe
Click to expand...
Click to collapse
ok thanx. will let you know if i face any issues.

GPS works perfectly in my device (ATU-L42)
I've tried pixel experience and lineage 15.1
In pixel experience signal bar works on all connection types but not in lineage 15.1
Only bug I found in pixel experience is auto brightness isn't working

vihanga123 said:
GPS works perfectly in my device (ATU-L42)
I've tried pixel experience and lineage 15.1
In pixel experience signal bar works on all connection types but not in lineage 15.1
Only bug I found in pixel experience is auto brightness isn't working
Click to expand...
Click to collapse
does the pixel experience has gcam build in?

pascua28 said:
Hi guys! This is a compilation of working and non-booting Treble Oreo ROMs for Huawei Y6 (2018). Full list of Treble Project ROMs is here. This list is still incomplete as I have not tested all ROMs listed in the link above. Therefore, if anyone tried a custom ROM not listed on this thread, please post it here so I can update this thread.
Please do note that I am not a ROM developer, you can still post bugs here so others will know and also on the ROM thread so we can hope for fixes.
We should thank @phhusson for all the works he's done to Project Treble
Project Treble ROMs are ROMs that are built to support as many devices as possible that support Treble. Treble devices, usually ship with Android Oreo pre-installed, therefore, our Huawei Y6 (2018) should technically boot any GSI/Treble ROM. But still, custom GSI ROMs are still not perfect and some devices may have bugs and some devices may not be unable to boot a particular ROM at all
The bugs for Y6 (2018) is found here :
Bootloop for all Android 9.0 ROM's
Bootloop for the latest AOSP 8.1 v25
Signal bar stays empty on h/h+ but works on e
GPS isn't working.
Prerequisites:
unlocked bootloader
adb and fastboot installed on your computer
How to flash ROMs for our device?
Before flashing, follow my guide HERE so you can always go back to stock ROM just in case. Also, make sure you downloaded an ARM64 A only image. This procedure erases your files so have a backup of your important files
Some ROM threads provide downloads in .zip file or in tar.xz file instead of .img files to save internet usage. Install 7-zip on Windows, open the file and extract the flashable .img file
1. Plug your device to the computer and reboot to download mode using this command:
Code:
adb reboot bootloader
2. Flash your desired ROM using this command:
Code:
fastboot flash system <ROM file here, should be a .img file>
3. Reboot!
Code:
fastboot reboot
4. When you see the warning "Your device has been unlocked and can't be trusted", press the Volume up button and your device will go to erecovery. There, you can select Factory Reset
Usually, custom ROMs come with 2 variants:
Vanilla - this is a plain ROM with no GApps and su (root access)
GApps - a ROM with Google Apps (Play Store, etc.). Usually comes with root access too!
Here is the list of ROMs that are tested. Feel free to post ROMs that are working for our device
1. CrDroid by @Dil3mm4
2. LineageOS by @phhusson
3. OmniROM Treskmod by @Letzen
4. Resurrection Remix by @mracar
5. Pixel Experience by @jhenrique09
6.AOSP 8.1 - older than v25 ONLY!! by @phhusson Download the old version here
7.Bootleggers ROM by @Dil3mm4
Tested not working:
1. AOSP Extended by @AryanPatidar - I only tried the latest version v5. 8, older versions may/may not work
2. AOKP by @sixohtew - I only tried the latest version, older versions may/may not work
3.AOSP v25 and later(?) by @phhusson
Click to expand...
Click to collapse
Getting this wired error both in pixel experience and crdroid. device-atu-l42
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

nafis5566 said:
Getting this wired error both in pixel experience and crdroid. device-atu-l42
Click to expand...
Click to collapse
You have to certify your device
Use the last link and follow this guide https://www.xda-developers.com/how-to-fix-device-not-certified-by-google-error/
For the navigation bar issue you just have to go settings>systrm>buttons>Manage navigation bar and choose a layout
nafis5566 said:
does the pixel experience has gcam build in?
Click to expand...
Click to collapse
Nope. The same cam in lineage os

vihanga123 said:
You have to certify your device
Use the last link and follow this guide https://www.xda-developers.com/how-to-fix-device-not-certified-by-google-error/
For the navigation bar issue you just have to go settings>systrm>buttons>Manage navigation bar and choose a layout
Nope. The same cam in lineage os
Click to expand...
Click to collapse
i certified following that threat. registration was successful. but still getting that error. then rolled back to rros.
and wasnt asking about the navigation bar.

nafis5566 said:
i certified following that threat. registration was successful. but still getting that error. then rolled back to rros.
and wasnt asking about the navigation bar.
Click to expand...
Click to collapse
For me it took like 10 mins to certify.. it doesn't work instantly

vihanga123 said:
For me it took like 10 mins to certify.. it doesn't work instantly
Click to expand...
Click to collapse
actually i waited more than 10 min.

vihanga123 said:
For me it took like 10 mins to certify.. it doesn't work instantly
Click to expand...
Click to collapse
actually i tried it again and now its working. thanx mate.

[ROM][10/Q][OFFICIAL][2020/05/29] AICP 15.0 for the redmi 5 plus

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP and then changed to be based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
We changed again for Android Q with a base of AOSP repositories and some additions from LineageOS for device specific repositories.
If there are any bugs, either we will sort them out, if it concerns our code base. This ROM isn't LineageOS supported, so there is no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@Maxwen and the rest of the OmniRom team
DU team
Resurrection Remix team
AOSiP team
Community
...
@LorD ClockaN
@eyosen
@semdoc
@SpiritCroc
@wartomato
@Miccia
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build weeklies and everything that comes with this, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 15.0
Download link: https://dwnld.aicp-rom.com/
(click on xiaomi, then click on the phone picture and just click download on the zip with the lastest date)
Full Changelog link: https://dwnld.aicp-rom.com/
(Just click the changelog button next to the download link in the list of builds available for your device)
Google Apps:
(link the best one for your device, there are several variants out there right now, nano/micro GApps from opengapps.org is almost always a good choice though)
You tell...
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look here to see what day your device is built on.
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP. Custom ROMs modify the framework a lot, so Xposed can cause a ton of issues on custom ROMs. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. Information about Xposed, EdXposed or Riru Core can be obtained from the XPosed General forums .
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, this is the usual behaviour on flashing a new official build by (or using) the build-in updater service.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash and reboot afterwards.
Using the ROM:
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat AND the model name. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.
The ROM should contain everything you need to enjoy Android Q. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery.
3. Wipe the System, Cache, and Data (you might need to format the data partition!).
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work).
6. Reboot and set up your device, enable developer settings and in them OEM unlock/Advanced reboot/USB tethering.
7. Reboot back into your recovery.
8. Flash the root solution of your choice (optional).
9. Reboot your device.
The procedure may vary on system updates!
Currently supported Root Solution:
Magisk stable
Magisk versions >= 20.3 don't usually need to be flashed on every dirty flash.
If you want to contribute to AICP, or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
https://github.com/Blacksuan19/kernel_dark_ages_vince
Device tree source:
https://github.com/ender1324/android_device_xiaomi_vince
Vendor source:
https://github.com/ender1324/vendor_xiaomi_vince
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
AICP Telegram channel for server notifications on official builds​
XDA:DevDB Information
[ROM][10/Q][OFFICIAL][2020/05/29] AICP 15.0 for the redmi 5 plus, ROM for the Xiaomi Redmi Note 5 / 5 Plus
Contributors
ender1324, @KenHV, Blacksuan19
Source Code: https://github.com/AICP
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: Lastest stock firmware
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 15.0
Stable Release Date: 2020-05-18
Created 2020-05-19
Last Updated 2020-05-30

reserved

Es la pole?

Awesome !! This has been my fav rom from old days...

We're official now

ender1324 said:
We're official now
Click to expand...
Click to collapse
ok zoomer

ender1324 said:
We're official now
Click to expand...
Click to collapse
Can you tell me what is the difference between official and un official roms ,I am new to this stuff
Sent from my Redmi Note 5 / 5 Plus using XDA Labs

PlayStore certified?

Shivaprasad.G.I said:
Can you tell me what is the difference between official and un official roms ,I am new to this stuff
Sent from my Redmi Note 5 / 5 Plus using XDA Labs
Click to expand...
Click to collapse
well one is supported by the official aicp team and yeah its unmodified aicp source
when unofficial is either unmodified or modified, its not supported by the official team

luistro said:
PlayStore certified?
Click to expand...
Click to collapse
it passes safetynet by default

new ota is pushed

I really love this rom and its the most stable of the Android 10 ROMs ive tried so far, but I am having a weird problem with calls on it. My voice starts not going through to the other end mid call sometimes and i have to recall or just the call ends randomly etc. I was on the latest version of the firmware when this happened, im not sure what it can be caused by if not ROM and the firmware.
I changed back to EU MIUI to avoid having this problems but I was totally satisfied with AICP other than that, I just want to know if its fixed so I can flash the ROM again. Or maybe understand what its caused by if its not the ROM.

Devs please look problem with DATA and two SIM cards. Data of SIM 1 not working , when switch Data to SIM 2 - all is fine.
If replace SIM slots - same story, SIM 1 data not work, SIM 2 - work.
Dont know why but all android 10 builds have this problem, only in Nitrogen OS - all is fine.
Thank you

AlienCreature7 said:
I really love this rom and its the most stable of the Android 10 ROMs ive tried so far, but I am having a weird problem with calls on it. My voice starts not going through to the other end mid call sometimes and i have to recall or just the call ends randomly etc. I was on the latest version of the firmware when this happened, im not sure what it can be caused by if not ROM and the firmware.
I changed back to EU MIUI to avoid having this problems but I was totally satisfied with AICP other than that, I just want to know if its fixed so I can flash the ROM again. Or maybe understand what its caused by if its not the ROM.
Click to expand...
Click to collapse
Hey!, We're working on a fix with the developers

oddi541 said:
Devs please look problem with DATA and two SIM cards. Data of SIM 1 not working , when switch Data to SIM 2 - all is fine.
If replace SIM slots - same story, SIM 1 data not work, SIM 2 - work.
Dont know why but all android 10 builds have this problem, only in Nitrogen OS - all is fine.
Thank you
Click to expand...
Click to collapse
Its a tree bug, we're working on a fix for that too

ender1324 said:
Hey!, We're working on a fix with the developers
Click to expand...
Click to collapse
Great to hear that, I assume its fixed now? Just saw the ROM has been getting weekly updates so I am going to try it again now!

Just flashed the latest version and it already rebooted 2 times in the middle of setup.

[ROM][13.0][TOCO][OFFICIAL] Project Elixir 3.x

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Project Elixir for the Xiaomi Mi Note 10 Lite [toco]
Code:
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
"This is a user-friendly thread, all your suggestions, and proper bug reports are important to us but don't be disrespectful to anyone here. Your suggestions and proper bug reports will be taken into consideration.."​
Project Elixir is another aftermarket AOSP ROM which basically offers minimal UI enhancement & close to Stock Android ROM with great performance, security and stability. Most of the OEMs' these days will provide slow and untimely updates, but we don't do that here. We closely follow Google to bring the latest updates to our users, and even prolong support for devices that have been declared obsolete by OEMs. Our ROMs' source code is open-source, secure, stable, and outstanding. Your experience while using Project Elixir will be butter smooth without compromising the quality of the Android experience. In short, it's perfectly balanced between Great Performance, Security, stability, minimal UI & awesome features including pixel goodies So do not hesitate anymore, join us now and start enjoying the beauty of stock Android. Download and enjoy Project Elixir on your respective devices!​
- Saurav - Founder / lead Developer
- Nishant - Co-lead Developer / Team
- Probir - Developer / Team
- Mayur - Developer / Team
- And Also Our Hardworking Maintainers​
// Checkout the latest changes you get //
Spoiler: Click Here to see
Latest Changelog: https://projectelixiros.com/changelog
NOTE : In Project Elixir you get all the useful features and with updating source every month it's hard to keep all the threads updated everytime everywhere so kindly visit our website for latest changes and screenshots.
// A screenshot is worth of thousand words //
Spoiler: Click Here to see
Latest Screenshots : https://projectelixiros.com/gallery
NOTE : In Project Elixir you get all the useful features and with updating source every month it's hard to keep all the threads updated everytime everywhere so kindly visit our website for latest changes and screenshots.
--------- > OFFICIAL Download Server < ---------
NOTE: Please keep in mind that these are Gapps Builds and there is no vanilla build of this rom available.
--------- > Visit Our OFFICIAL Website < --------- ​
NOTE: It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine. If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
CLEAN FLASH (Moving From A12 to A13)
- Download the latest build
- Take a backup for safe side
- Boot to Recovery
- Format Data by typing yes
- Flash the latest build
- Reboot
What works?
Wifi | RIL | Mobile data | GPS | Camera
Flashlight | Camcorder | Bluetooth | Fingerprint reader | Lights | Sound | vibration
Almost everything
What doesn't work? or Any Bug ?
You tell me!
BUG REPORT !!
As soon as the problem occurs, take a logcat and please inform us via Telegram or XDA.
for more READ THIS​
- Android Open-Source Project
- Pixel Experience
- LineageOS
- Proton AOSP
- Arrow OS
XDA Banner and Template Credit goes to Amaan
- Others, I may have forgot to mention​
- Android OS version: 13.0
- Security patch: October 2022
- Build author/Device Maintainer : @AndroidHQ254
- DEVICE: Xiaomi Mi Note 10 Lite
- DEVICE CODENAME: toco
---- Sources and Documentation ----
-- ROM Source Code --
-- Kernel Source --
-- Documentation & Maintainership --​
-- OFFICIAL Website and Telegram Support --
-- Visit our OFFICIAL Website --
-- Device Update Telegram Channel --
-- Support/Discussion Telegram Group --​
// Giving a little can HELP a lot //
- As you know build is free but building ROM needs server and in order to maintain the source, we need High-End Servers that are generally very expensive and need to be renewed every single month and as a student its quite difficult. To meet with our technical expenses, a cup of coffee, and the efforts of the developers we need your monetary support!
- Do consider donating or buying me a coffee on Paypal or join us on Patreon for sustainable support and rewards if you want to appreciate our work.
- Thank you for your support !
​

Nice

i don't know if this is a bug, but under screen fingerprint reader does not work when the screen is off

everything works so well, this rom is much better than miui hahaha, awesome work!

Hi to all. Are the banking apps works normally ?
Or do we need any hacks for security checks ?
Thanks

John Crush said:
everything works so well, this rom is much better than miui hahaha, awesome work!
Click to expand...
Click to collapse
Hi. What recovery did you use to flash this ROM please ?
Ps: I'm from stock Miui 13.02

teknocorse said:
Hi. What recovery did you use to flash this ROM please ?
Ps: I'm from stock Miui 13.02
Click to expand...
Click to collapse
Hi, I followed the installation guide on the official website:
Project Elixir
projectelixiros.com
So I used this twrp version:
[RECOVERY][3.6.2_12][TOCO][UNOFFICIAL] Stable TWRP for Android 13 AOSP Roms
Team Win Recovery Project or TWRP for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added a lot of our...
forum.xda-developers.com
And I installed the "MIUI V13.0.2.0 Firmware" in the global version, even though my phone is from Europe

John Crush said:
Hi, I followed the installation guide on the official website:
Project Elixir
projectelixiros.com
So I used this twrp version:
[RECOVERY][3.6.2_12][TOCO][UNOFFICIAL] Stable TWRP for Android 13 AOSP Roms
Team Win Recovery Project or TWRP for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added a lot of our...
forum.xda-developers.com
And I installed the "MIUI V13.0.2.0 Firmware" in the global version, even though my phone is from Europe
Click to expand...
Click to collapse
Thank you !

John Crush said:
everything works so well, this rom is much better than miui hahaha, awesome work!
Click to expand...
Click to collapse
Thanks. Glad you are enjoying

teknocorse said:
Hi to all. Are the banking apps works normally ?
Or do we need any hacks for security checks ?
Thanks
Click to expand...
Click to collapse
SafetyNet passes out of the box without root

i flash it i follow procedure but keep on rebooting and back to recovery mode

Hey, I installed this ROM with TWRP but the camera app doesn't work. Am i doing something wrong? I installed by clean flash method.

lucy42 said:
Hey, I installed this ROM with TWRP but the camera app doesn't work. Am i doing something wrong? I installed by clean flash method.
Click to expand...
Click to collapse
In addition, only the native camera app crashes. Like, if i open the google lens app camera actually opens. But, the native camera app comes with the ROM crashes. @AndroidHQ254

lucy42 said:
In addition, only the native camera app crashes. Like, if i open the google lens app camera actually opens. But, the native camera app comes with the ROM crashes. @AndroidHQ254
Click to expand...
Click to collapse
I ported the BSG's GCam 8.1 with the config files designated to Mi Note 10 Lite and fixed this problem.

lucy42 said:
I ported the BSG's GCam 8.1 with the config files designated to Mi Note 10 Lite and fixed this problem.
Click to expand...
Click to collapse
extremely confusing... where to get the configs? and which file to download exactly? im given like 6 different options and none seem intuitive.
"
Download:​
MGC_8.1.101_A9_GV2b_snap.apk (org.codeaurora.snapcam) #
MGC_8.1.101_A9_GV2b_MGC.apk (com.android.mgc) #
MGC_8.1.101_A9_GV2b_ENG.apk (com.google.android.GoogleCameraEng) #
MGC_8.1.101_A9_GV2b_ruler.apk (com.samsung.android.ruler) #
MGC_8.1.101_A9_GV2b_scan3d.apk (com.samsung.android.scan3d) #
MGC_8.1.101_A9_GV2b_qcamera3.apk (org.codeaurora.qcamera3) #"
EDIT ok i got help here - any of these are fine, except the ones for Samsung, as they are esentially the same thing.

Fingerprint scanner doesnt work when in sleep, doesnt wake phone. need to hit power button then scan finger.
also, wifi button doesnt seem to toggle in the quick drop down menu. Visually.
Edit - wifi button works, just had to reboot system. maybe phone brain fart.

Any plans for a vanilla build at some point?

Idaho1911 said:
Any plans for a vanilla build at some point?
Click to expand...
Click to collapse
no

eishey said:
i flash it i follow procedure but keep on rebooting and back to recovery mode
Click to expand...
Click to collapse
Ensure you use the recommended Android 13 recoveries

maxlieb said:
Double tap to wake does not work after ~5 seconds after screen off (after the always on display dims down)
* Might be related to a broken screen replacement.
* I DID verify that the problem is a software problem - flashed xiaomi.eu rom and it DOES work there.
* I'm NOT at all sure it worked even with original screen (screen was fully functional, just a few cracks in the glass)
Update:
Tried derpfest and project elixir, same problem.
also found this on pixel-experience github issue tracker...
exactly the same issue - AOD becomes too dim and tap to wake stops working.
seems it's a known problem.
Click to expand...
Click to collapse
Quoting myself from the thread for Evolution rom... same problem with Elixir and DerpFest.