Tencent Ver's Switch is very cheap and it has sufficient supplies...
If it's possible to dump other version's ROM, fix the key and flash to tencent ver?
twinklerqm said:
Tencent Ver's Switch is very cheap and it has sufficient supplies...
If it's possible to dump other version's ROM, fix the key and flash to tencent ver?
Click to expand...
Click to collapse
You'll get support over on gbatemp, you will not get support here because xda = mobile operating systems
techjunky90 said:
You'll get support over on gbatemp, you will not get support here because xda = mobile operating systems
Click to expand...
Click to collapse
Technically Horizon OS is a mobile operating system
As for op here's a guide. You need to edit your prodinfo and clear your system saves https://forum.devchroma.nl/index.php/topic,222.msg520/boardseen.html
Related
Hi all,
I see a lot of things on xda.cn for the htc photon... But, i'm french and google's translate is not very good for china..
what do you think about that ?
http://bbs.xda.cn/forum.php?mod=forumdisplay&fid=260&page1
actually nothing special on there...there're only some "modified" versions from schlund's release...
They have some very active rom development (one of them has a wifi fix, battery saving algorithms and a gps fix). It should be interesting if someone skilled can apply this to schlund's release, so we have an english version of it
speedfreak007 said:
They have some very active rom development (one of them has a wifi fix, battery saving algorithms and a gps fix). It should be interesting if someone skilled can apply this to schlund's release, so we have an english version of it
Click to expand...
Click to collapse
for battery saving, it only removes a lot of systematic apps from the install zip
you could also do it by using "SystemApp Remover"
Remove some unnecessary apps from the system partition
peter08po said:
actually nothing special on there...there're only some "modified" versions from schlund's release...
Click to expand...
Click to collapse
Not just that ... they try replacing schlund's kernel with a Russian one.
xnym said:
Not just that ... they try replacing schlund's kernel with a Russian one.
Click to expand...
Click to collapse
you just have to perform this in the fastboot mode of schlund's release:
Code:
fastboot flash boot boot.img
*the boot.img is extracted from russian's release
and then reboot the phone
I have not read it wrong, it seems that Schlund has said that in the coming days will release a new kernel because of the problem of battery power ...
xnym said:
Not just that ... they try replacing schlund's kernel with a Russian one.
Click to expand...
Click to collapse
What should be better in that russian kernel?
speedfreak007 said:
What should be better in that russian kernel?
Click to expand...
Click to collapse
the black screen of incoming calls won't happen in russian's kernal
I install the xda.cn Version
Hi I installed android 2.3 and 2.2 but my wifi don't work, installed the xda.cn version and not see much diference and my wifi dont work.
Anyone can help me ?
osmarsilva said:
Hi I installed android 2.3 and 2.2 but my wifi don't work, installed the xda.cn version and not see much diference and my wifi dont work.
Anyone can help me ?
Click to expand...
Click to collapse
did you use the new lkbootloader? (the out.nb)
if not, wifi won't work. make sure you flash the correct out.nb for your corresponding rom.
I tried two Versions
HI I tried the two versions, lk-photonic.nb and out.nb but my wifi doesn't work.
How do I know the correct version for my correspondent rom ?
osmarsilva said:
Hi I installed android 2.3 and 2.2 but my wifi don't work, installed the xda.cn version and not see much diference and my wifi dont work.
Anyone can help me ?
Click to expand...
Click to collapse
I've already installed Chinese Roms and my WiFi worked as well as others, so the problem must be something especial for you.
Hi,
This is (as far as I know) the first dump of wp8. It's based on the 9900 (emulator) build and is meant for cooking roms (for WP7/8 devices)
It has all 51 languages and all 3 screen resolutions
Good luck devs,
Download link:
http://htcfanboys.com/download/sianto1997/?action=view&file=14516
If you use this in a rom, please mention me.
greetz
WOW!Thank you very much!:laugh:
Do you know that emulator have x86 version of WP8? It's impossible to use it. So your dump is really useless, even more than me.
Shhh... It's easy to dump the emulator, just mount VHD.
Useless guy said:
Do you know that emulator have x86 version of WP8? It's impossible to use it. So your dump is really useless, even more than me.
Shhh... It's easy to dump the emulator, just mount VHD.
Click to expand...
Click to collapse
I see, sorry, but now no one has to download 7 gb to get the emulator dump!
sianto1997 said:
7 gb to get the emulator dump!
Click to expand...
Click to collapse
Offline ISO weights 1.6GiB. But it's much faster to download using torrent than downloading from unknown hosting.
Sorry but in the future is possible to have a WP8 Rom on a WP 7/7.8 device?
POSSAASSDDE said:
Sorry but in the future is possible to have a WP8 Rom on a WP 7/7.8 device?
Click to expand...
Click to collapse
Yes and no. As it's possable to run on the hardware (all 1st gen are the same CPU wise and 2nd gen are pretty close still) and even Microsoft said so, there are no drivers designed for it. Nevermind the OS is designed for a dual core CPU, so performance could be a big hit.
The HD2 was the ONLY Windows Mobile device to get WP7 and the only reason why that is was because Microsoft used the HD2 in testing WP7 and someone "leaked" the drivers needed. If things follow suit, the chances of getting a WP8 rom running on a WP7.5 device might be like finding that needle in a haystack...might happen but, I would not hold my breath.
I also would love to see it tho.....
Hi all
Please help me to do this thing, I have a smart tlélévision with android OS, and I want to change the OS to add boot logo and specific application to me.
The module is RK2918, and the Android OS version 2.3.
Is that it is possible?
Thank you.
DarkAminoo said:
Hi all
Please help me to do this thing, I have a smart tlélévision with android OS, and I want to change the OS to add boot logo and specific application to me.
The module is RK2918, and the Android OS version 2.3.
Is that it is possible?
Thank you.
Click to expand...
Click to collapse
You may need to get ROM first.
FocusVideo said:
You may need to get ROM first.
Click to expand...
Click to collapse
But i have the module, and the android is already exist on it!
DarkAminoo said:
But i have the module, and the android is already exist on it!
Click to expand...
Click to collapse
So it works standalone? There should be a HDMI interface, right?
If so, maybe you can try to find RK2918 compiling environment to build your image.
FocusVideo said:
So it works standalone? There should be a HDMI interface, right?
If so, maybe you can try to find RK2918 compiling environment to build your image.
Click to expand...
Click to collapse
There's an HDMI interface but when the module is stillconnected on tv, else there's an 46 pin.
If I can reflash it with the hdmi or USB on interface, kindly tell me
Update from jerpelea
jerpelea said:
sorry for forgetting this info
i have updated the build guide
to flash system you have to use
fastboot -S 256M flash system system.img
br
J
Click to expand...
Click to collapse
This is now booting for me.
This thing flies on AOSP but there appears to be something wrong with the baseband info / wifi info as neither of them are working
Now Booting
Once I figure out why Cell Service / WiFi doesn't work I'll post a flashable zip or systme img
ChrisJ951 said:
Now Booting
Once I figure out why Cell Service / WiFi doesn't work I'll post a flashable zip or systme img
Click to expand...
Click to collapse
I just built an image as well. Do you want to try the version I built to rule out any possible issues in the build environment? I don't want to unlock my bootloader yet...
dl12345 said:
I just built an image as well. Do you want to try the version I built to rule out any possible issues in the build environment? I don't want to unlock my bootloader yet...
Click to expand...
Click to collapse
It's okay, jerpelea said it's because they haven't released the kernel wireless driver or GSM:
jerpelea said:
This is normal for an initial release
We have not added yet kernel wireless driver or GSM
Br
J
Click to expand...
Click to collapse
dl12345 said:
I just built an image as well. Do you want to try the version I built to rule out any possible issues in the build environment? I don't want to unlock my bootloader yet...
Click to expand...
Click to collapse
Do you think following parts of these guides:
http://forum.xda-developers.com/showthread.php?t=2475352
http://forum.xda-developers.com/crossdevice-dev/sony/guide-porting-custom-roms-t2828854
We may be able to get Wifi/cell working with the stock ROM libraries? We may be better off going to CM 5.0.1 isntead of AOSP 5.1.1 if we do this
We currently don't have a custom ROM for the A20,
but it would be the next logical step.
If someone could develop a custom ROM it would raise our status in the xda community.
Useful links.
1. Android ROM development from source to end.
https://forum.xda-developers.com/chef-central/android/guide-android-rom-development-t2814763
2. Building AOSP.
https://source.android.com/setup/build/requirements
3. Easy guide?
https://forum.xda-developers.com/showthread.php?t=2195858
4. Custom Rom Builder
https://forum.xda-developers.com/chef-central/android/tool-custom-rom-builder-t3947779
5. Android Kitchen.
https://forum.xda-developers.com/showthread.php?t=633246
6. SuperR's Kitchen.
https://forum.xda-developers.com/ap...dows-linux-superr-s-kitchen-v3-0-0-0-t3601702
Post 3
physwizz said:
We currently don't have a custom ROM for the A20,
but it would be the next logical step.
If someone could develop a custom ROM it would raise our status in the xda community.
Click to expand...
Click to collapse
Without the support from USA device owners and them being left out from rooting played a huge factor.
The Motog7power just got Lineage OS 16.
Twrp was done weeks ago. Buy a Motorola.
jhjhjhjhjhjh said:
Without the support from USA device owners and them being left out from rooting played a huge factor.
The Motog7power just got Lineage OS 16.
Twrp was done weeks ago. Buy a Motorola.
Click to expand...
Click to collapse
Yes. It has left us at a great disadvantage without you guys.
I tried Android Kitchen.
https://forum.xda-developers.com/showthread.php?t=633246
Made a ROM zip from my system.img and boot.img
Got updater error when installing.
physwizz said:
I tried Android Kitchen.
https://forum.xda-developers.com/showthread.php?t=633246
Made a ROM zip from my system.img and boot.img
Got updater error when installing.
Click to expand...
Click to collapse
Last update seems to be from 2013, i don't think that is compatible with Android Pie.
I recommend you to use SuperR's Kitchen (free version is only available for Linux, to use it on Windows you need to buy the full version).
TBM 13 said:
Last update seems to be from 2013, i don't think that is compatible with Android Pie.
I recommend you to use SuperR's Kitchen (free version is only available for Linux, to use it on Windows you need to buy the full version).
Click to expand...
Click to collapse
Should work on my Mac
TBM 13 said:
Last update seems to be from 2013, i don't think that is compatible with Android Pie.
I recommend you to use SuperR's Kitchen (free version is only available for Linux, to use it on Windows you need to buy the full version).
Click to expand...
Click to collapse
Couldn't execute binary on the Mac, but I got it running on a Linux virtual box.
physwizz said:
Couldn't execute binary on the Mac, but I got it running on a Linux virtual box.
Click to expand...
Click to collapse
Cool ... please keep us posted on any progress you make I will also take a look into a possible build for our phone.
Peace
....The box said to install under Windows 2000 or better ... so I installed it on Linux
Thibor69 said:
Cool ... please keep us posted on any progress you make I will also take a look into a possible build for our phone.
Peace
....The box said to install under Windows 2000 or better ... so I installed it on Linux
Click to expand...
Click to collapse
I just flashed a zip I cooked that was made from the patched boot and the stock system.img
No luck there.
Back to the drawing board.
physwizz said:
I just flashed a zip I cooked that was made from the patched boot and the stock system.img
No luck there.
Back to the drawing board.
Click to expand...
Click to collapse
Stuck at boot animation?
Any logs?
TBM 13 said:
Stuck at boot animation?
Any logs?
Click to expand...
Click to collapse
I'm going to try a non-stock system.img
physwizz said:
I'm going to try a non-stock system.img
Click to expand...
Click to collapse
How is it going for you, i try modding a GSI System.img but it also bootloops, i also try creating a EXT4 Img but it gives me system partition sizes error.
LietRell said:
How is it going for you, i try modding a GSI System.img but it also bootloops, i also try creating a EXT4 Img but it gives me system partition sizes error.
Click to expand...
Click to collapse
still working on it.
No luck yet
physwizz said:
still working on it.
No luck yet
Click to expand...
Click to collapse
Were all hoping to get a working custom rom for this device, Keep up bro. Thanks for trying
Seems like all the GSI ROMs break some hardware functionality at this stage so the best option for now is to root and debloat stock and load your own preferred apps in place of the Samsung / Google ones. Not quite a "Custom" ROM but makes for a pleasant enough phone that you can tolerate much more than the horror of stock.
Now a custom kernel to clock our severely crippled SoC back to its full glory would be a thing to smile about
LietRell said:
How is it going for you, i try modding a GSI System.img but it also bootloops, i also try creating a EXT4 Img but it gives me system partition sizes error.
Click to expand...
Click to collapse
My GSI based ROM gives me an error:7 during installation
physwizz said:
My GSI based ROM gives me an error:7 during installation
Click to expand...
Click to collapse
I think that's because you have to add the device in 8)Room tools, 4)Asserts menu, 1)Add/remove device, then try adding the device, in my case i added "a20,a205g", i don't really know what device name TWRP reads
LietRell said:
I think that's because you have to add the device in 8)Room tools, 4)Asserts menu, 1)Add/remove device, then try adding the device, in my case i added "a20,a205g", i don't really know what device name TWRP reads
Click to expand...
Click to collapse
When I flashed as A20, it told me the device was a20.
I added just a20. It flashed but froze on the Samsung screen.
Progress.
It's all a learning experience.
I also found this on GitHub.
https://github.com/alwayslivid/android_kernel_samsung_a202f
https://github.com/alwayslivid/android_platform_samsung_a202f
From Open Source Samsung.
http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=A20