I recently received a Galaxy J7 over the Holidays which works fine as a daily driver with stock Android Oreo. However,it doesn't have NFC capabilities which means I can't utilize Google Pay at the register during this Global COVID-19 Pandemic to avoid having to touch the checkout keypad to enter the PIN. Also, the functionality in Android 5.0.1 Lollipop just doesn't compare to Android 8.0 and it'd be awesome to have Lineage OS 17.1 which is based on Android 10 Q for so many different reasons.
I recently found an old Galaxy S4 SGH-1337 jflteatt for AT&T - this phone does have NFC capabilities which is great, but has a locked bootloader as it is on Android Lollipop 5.0.1.
I started a Project to go from Android Lollipop 5.0.1 to Lineage OS 17.1 The aim is to downgrade from Android Lollipop 5.0.1 to Android Jelly Bean 4.2.2 which has the unlocked I337UCUAMDB bootloader which I can then root and install Lineage OS 17.1 .
I was able to downgrade Android Lollipop 5.01 to Android KitKat by flashing the stock Android KitKat 4.4.2 firmware via Odin3 v3.12.
However, when I tried to flash the stock Android Jelly Bean I received the SW REV Check Fail Fused: 5 Binary: 1 and the below from Odin3 v3.12:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1207)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> FAIL! (Auth)
Thru researching online, it seems the error is caused because the firmware on the phone is newer than the firmware that is trying to be installed.
But that doesn't make sense as I was able to downgrade firmware from Android Lollipop 5.0.1 to Android KitKat 4.4.2. I'm not certain what I'm missing. I was able to find this video which seems to have the fix but I don't know the language and there's no download links for the files that are utilized.
Video Title: Samsung SW REV CHECK FAIL Solution | By Sagar Mobile
I would greatly appreciate any assistance that you can provide as I've been working on this project for almost a week now and invested so many hours already into it and I believe I'm just so so close to success.
Thank you so much, and stay safe out there during these trying times.
your bootloader is preventing the downgrade.. afaik it won't be possible to revert back to 4.2.2, unbranded devices included.
also, i think 4.2.2 is pre-mendatory-knox. for that fact alone, i think the bootloader won't allow you to go below 4.4.2.
in general, at&t branded S4s are not the ones you want...
7adm said:
your bootloader is preventing the downgrade.. afaik it won't be possible to revert back to 4.2.2, unbranded devices included.
also, i think 4.2.2 is pre-mendatory-knox. for that fact alone, i think the bootloader won't allow you to go below 4.4.2.
in general, at&t branded S4s are not the ones you want...
Click to expand...
Click to collapse
Thanks for your response, which is in line with the research that I've been doing. With this stock firmware, I can't downgrade past 4.4.2. Oh well... it seems the only option I have left is to buy an unlocked phone that already has the stock 4.2.2 firmware that I'm after. Only thing is, they all say "unlocked to work with any GSM carrier, not for CDMA carrier."
If I were to buy this phone, would it be possible to utilize on AT&T which is a CDMA carrier [the research I did said yes and no] and is it a guarantee that the Android 4.2.2 firmware would have either of the unlocked bootloaders: I337UCUAMDB / I337UCUAMDL that I should be able to root and install Lineage OS...
Regarding COVID-19, wear gloves as the J7 runs circles around the S4.
That said, if you really want a Galaxy S4, the best models available to you are as follows:
SGH-I9505G (Google Play US model)
SGH-I337M (Canada)
SGH-M919 (T-Mobile)
Under no circumstances would I recommend an AT&T model, nor would I recommend a Verizon model. Both carriers lock their bootloaders to prevent you from doing what you're attempting. However, developers here on XDA released Safestrap, a recovery that bypasses the locked bootloader by dedicating a portion of the device's internal storage to the Android system. In effect, you have two systems on the device.
AT&T uses GSM. Verizon used CDMA, but as of 2020 that may no longer be the case due to their 3G network being shut down. Regardless, it's unlikely you will find a device of the S4's vintage that hasn't been upgraded from Android 4.2.2. You would be better served looking for one of the recommended Galaxy S4 devices in the short list above or, even better, getting a newer device with an unlockable bootloader, like the Nexus 5X, Pixel, Pixel 2, or Pixel 3a.
Strephon Alkhalikoi said:
Regarding COVID-19, wear gloves as the J7 runs circles around the S4.
That said, if you really want a Galaxy S4, the best models available to you are as follows:
SGH-I9505G (Google Play US model)
SGH-I337M (Canada)
SGH-M919 (T-Mobile)
Under no circumstances would I recommend an AT&T model, nor would I recommend a Verizon model. Both carriers lock their bootloaders to prevent you from doing what you're attempting. However, developers here on XDA released Safestrap, a recovery that bypasses the locked bootloader by dedicating a portion of the device's internal storage to the Android system. In effect, you have two systems on the device.
AT&T uses GSM. Verizon used CDMA, but as of 2020 that may no longer be the case due to their 3G network being shut down. Regardless, it's unlikely you will find a device of the S4's vintage that hasn't been upgraded from Android 4.2.2. You would be better served looking for one of the recommended Galaxy S4 devices in the short list above or, even better, getting a newer device with an unlockable bootloader, like the Nexus 5X, Pixel, Pixel 2, or Pixel 3a.
Click to expand...
Click to collapse
Thank you for the listing of the phones, I'll definitely look into them if I can't obtain a 4.2.2 firmware S4. It's interesting that you mentioned Safetrap, as I definitely did focus on in while researching in the XDA forums and web due to the locked bootloader issue ...but everything I found said that it's not compatible with AOSP ROMs and is only compatible with TouchWiz ROMs.
Is Lineage OS an AOSP ROM... if so I can finally complete this project...but I'd like to be fully certain before I take that leap of faith.
Dayus999 said:
Is Lineage OS an AOSP ROM... if so I can finally complete this project...but I'd like to be fully certain before I take that leap of faith.
Click to expand...
Click to collapse
LineageOS is based off of AOSP, so if Safestrap doesn't like it, then you know what not to get.
Related
Hello from Brazil to Grand 2 owners and developers!
I've just bought a Grand 2 Duos smartphone, to replace my Grand Duos (GT-I9082L) because of a broken screen. After reading many XDA posts on this phone, I found out that my model number is not the same mentioned here: mine is SM-G7102T, not SM-G7102. I guess "T" stands for "TV", as it has a digital TV receiver, with antenna and builtin app (see photo/screenshots attached).
I would like to try rooting my phone, but it seems dangerous to install @balliboxer's prerooted ROM, because of the different model number. Is there any safe way to test it? TV is not important, root access would be much more useful. But I'm afraid of bricking my phone with the custom ROM.
As it's a newly released phone, I couldn't even find its stock ROM on samfirmware.com or samsung-updates.com. Is there any way to backup my current firmware, so that I can restore if needed?
Can I help XDA members to find out some technical details about this specific model, so that balliboxer and other developers can assure if the custom ROMs can work with it?
-> UPDATED - April 1st (not April Fools!!): CF-ROOT file made for SM-G7102 works with SM-G7102T! Check this thread (thanks, chainfire!):
http://forum.xda-developers.com/galaxy-grand-2/development/-t2698428
Thanks a lot!
Francisco Mogadouro da Cunha
Campinas - Sao Paulo - Brazil
Francisco,
I think it will be hard to get root access because appearantely this model have just release only here in Brazil
Friend. I bought SM-G7102T but it is impossible to use. Lock too. It is very difficult to make and receive calls. Until changed by another but the default continues. Your gran 2 also came with this defect?
gerardojunior said:
Friend. I bought SM-G7102T but it is impossible to use. Lock too. It is very difficult to make and receive calls. Until changed by another but the default continues. Your gran 2 also came with this defect?
Click to expand...
Click to collapse
Have you this problem yet? I have the same problem and I'm trying to solve this, but no success
Root and call problems
I cant do the root and Im having trouble with calls (very slow with the contacts). Any solution?
rlfmeneses_ i have the same problem ;(
DELETED
Re:
rspaulo said:
DELETED
Click to expand...
Click to collapse
1) Install KIES on your desktop;
2) Plug your Grand 2 Duos (SM-G7102T) via USB cable;
3) When KIES recognizes device and it's version (SM-G7102T), it will automatically update with new firmware version that fix this problem. (Problem: Very slow to answer calls and to made new calls also to view contact list).
Thanks;
Jussa.
JussaSP said:
1) Install KIES on your desktop;
2) Plug your Grand 2 Duos (SM-G7102T) via USB cable;
3) When KIES recognizes device and it's version (SM-G7102T), it will automatically update with new firmware version that fix this problem. (Problem: Very slow to answer calls and to made new calls also to view contact list).
Thanks;
Jussa.
Click to expand...
Click to collapse
Just want a 4.4 rom, but thanks
chicao said:
Hello from Brazil to Grand 2 owners and developers!
I've just bought a Grand 2 Duos smartphone, to replace my Grand Duos (GT-I9082L) because of a broken screen. After reading many XDA posts on this phone, I found out that my model number is not the same mentioned here: mine is SM-G7102T, not SM-G7102. I guess "T" stands for "TV", as it has a digital TV receiver, with antenna and builtin app (see photo/screenshots attached).
I would like to try rooting my phone, but it seems dangerous to install @balliboxer's prerooted ROM, because of the different model number. Is there any safe way to test it? TV is not important, root access would be much more useful. But I'm afraid of bricking my phone with the custom ROM.
As it's a newly released phone, I couldn't even find its stock ROM on samfirmware.com or samsung-updates.com. Is there any way to backup my current firmware, so that I can restore if needed?
Can I help XDA members to find out some technical details about this specific model, so that balliboxer and other developers can assure if the custom ROMs can work with it?
-> UPDATED - April 1st (not April Fools!!): CF-ROOT file made for SM-G7102 works with SM-G7102T! Check this thread (thanks, chainfire!):
http://forum.xda-developers.com/galaxy-grand-2/development/-t2698428
Thanks a lot!
Francisco Mogadouro da Cunha
Campinas - Sao Paulo - Brazil
Click to expand...
Click to collapse
Hi friend... I´m from Brazil too and I have a g7102t. When you rooted the phone, the TV stay works?
I have some issues on my smartphone. The battery is very hot and terminate so fast. The GPS is very slow to connect.
I need to upgrade to 4.4.4 or 5.0 (CM12). But I can´t lose TV function.
Can you help me?
thiago.augusto.souza said:
Hi friend... I´m from Brazil too and I have a g7102t. When you rooted the phone, the TV stay works?
I have some issues on my smartphone. The battery is very hot and terminate so fast. The GPS is very slow to connect.
I need to upgrade to 4.4.4 or 5.0 (CM12). But I can´t lose TV function.
Can you help me?
Click to expand...
Click to collapse
Hi Thiago! I'll write in English, as the answer may be useful to people from other countries. I really don't know if there is GM-7102T in any other country, or if it's a Brazil-only version.
Everything works fine after rooting, including embedded TV. Unfortunately my phone broke some months ago, and I've changed to other model. So I think I can't help you with the other issues.
Francisco
Hi Francisco! Tks for response! I'll try to root too. But do you know if cm12 still works built in TV?
thiago.augusto.souza said:
Hi Francisco! Tks for response! I'll try to root too. But do you know if cm12 still works built in TV?
Click to expand...
Click to collapse
I don't know anything about CM12 on G7102T. I've used only a rooted stock ROM.
I guess TV won't work, as it requires specific software. But you can try it and reinstall original ROM back if it doesn't work.
chicao said:
I don't know anything about CM12 on G7102T. I've used only a rooted stock ROM.
I guess TV won't work, as it requires specific software. But you can try it and reinstall original ROM back if it doesn't work.
Click to expand...
Click to collapse
Dear Chicao,
Do you think that it´s possible do a backup of TV´s software (with Titanium Backup) and restore on CM12?
Regards,
Thiago.
thiago.augusto.souza said:
Dear Chicao,
Do you think that it´s possible do a backup of TV´s software (with Titanium Backup) and restore on CM12?
Regards,
Thiago.
Click to expand...
Click to collapse
The tv app uses a lot of libs and system files tb won't backup. I already did it.
We already lost the hope on getting an official update for the g7102, didn't we?
Sent from my Note3
I am have problem in Odin write failed... Can you help?
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1210)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Erase)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
I dont have permission for post picture or URL
Enviado de meu MI 5 usando Tapatalk
Hi guys, now i can confirm that there is a possibility to root newest official Samsung 4.4.2 roms ( newer than 6 jul ) without tripping knox. I just did that to my phone today - s4 mini LTE - i9195.
Quick guide to do that. In this case i downloaded newest rom for Germany (DBT region) - NH5 from sammobile.
1. Flash your phone with this rom and turn it on.
2. Again run Odin 3.09 and as AP give kernel from older rom - NE6
3. Run phone, google towel root, install, make it rain.
4. Run odin and flash back to newest kernel that matches your rom, in this case - NH5.
6. Install SuperSU and enjoy your rooted phone with newest 4.4.2 kit kat with knox 0x0 !
Kernel for NH5 (DBT) for s4 mini:
https://mega.co.nz/#!mtcBjbYD!CK6S5zoTU7qkaau0OCfNglL62roTWb2dvNMeYk1J8oU
Kernel for NE6 (DBT) for s4 mini:
https://mega.co.nz/#!ewMDWYIK!ZV9o-94hLyjvHyDKi8WCTXXLY-67UQRVwxaYEcVPO4A
You can do the same with different roms, just use this script to prepare kernel for flashing with odin:
http://forum.xda-developers.com/showthread.php?t=2446269
Thanks for:
@wajiman
@_alexndr
Confirmation photos:
https://mega.co.nz/#!WpNWFbRY!U0eWjuO2n-ZyMZSUARlDpqoj9mzvaCFWLah-9g9AAHM
https://mega.co.nz/#!648RhIAQ!v1vVrzMkh0zWhEPSbdanv_F-Ix0pXeqnO0wImzPtSRM
https://mega.co.nz/#!y4UmDCzb!5lcMCM4la_ogxC5r4MfXdtxl5YFZeAzgidMsCtJIQqw
if you like it, click thanks !
can it's supported i9192
can it's supported i9192
Rooted Samsung Galaxy S4 GT-I9515
Thanks a lot for the write-up, lefti696!
For what it's worth, I successfully rooted the Samsung Galaxy S4 VE (GT-I9515) with the newest firmware (I9515XXU1ANI3), applying your strategy.
The steps I took were:
download the current and an older stock firmware (I9515XXU1ANI3 and I9515XXU1AND3, respectively),
extract the boot.img from both
convert them to .tar.md5 using Odin 3.07 by mkh.mourad you mentioned
flash the older bootloader (using Odin 3.09)
use towelroot
install superSU and verify using Root Checker
flash the new bootloader (using Odin 3.09)
For convenience, I've uploaded the Odin-compatible stock bootloaders I used here (can't link them as this is my first post on this forum):
The current one (I9515XXU1ANI3): https://mega.co.nz/#!cgECARKK!mVpGXgXTeHDiQpQCKrTimBHbxy1R067L3I51VtwsptY
The older one (I9515XXU1AND3): https://mega.co.nz/#!Zh1jVaJI!0yJ6aYqsFnXMwxRSN-GAqo8iKFS2YfVx6hHcCT0VYUI
Disclaimer: As I'm a beginner, I've already tripped the Knox counter before I used that strategy (flashed the bootloader you posted from the Galaxy S4 Mini), so I could not verify that this strategy doesn't trigger it. Logically, it should not trigger it.
Unfortunately, there currently seem to be no custom ROMs for the GT-I9515 as it's just a "value edition" with different touch screen, wifi, etc.
I have bought a used phone in germany, but the OS seems to be a France version:
PDA: I9195XXUCNK1 CSC: I9195OXXCNK1
It does not matter, I can use german language. But would I be able switch to a german ROM without affecting KNOW?
For first: I want to root to get access to SD card. So I stay on the currentl installed FW for first.
Thanks, Yours Simon
hanswurst07 said:
I have bought a used phone in germany, but the OS seems to be a France version:
PDA: I9195XXUCNK1 CSC: I9195OXXCNK1
It does not matter, I can use german language. But would I be able switch to a german ROM without affecting KNOW?
For first: I want to root to get access to SD card. So I stay on the currentl installed FW for first.
Thanks, Yours Simon
Click to expand...
Click to collapse
Sir,
If you flash stock firmware, no matter country, you will not have any problems with warranty or KNOX.
Just be carefully and do a backup before all.
Regards
Nice !
But too late for me,I have already 0x1.
Is there any option to revert this thing ?
RobinNet1 said:
Nice !
But too late for me,I have already 0x1.
Is there any option to revert this thing ?
Click to expand...
Click to collapse
If you're from EU, it doesn't matter...
S3miniFin said:
If you're from EU, it doesn't matter...
Click to expand...
Click to collapse
Why? I'm in EU (Croatia) and the warranty is void if you have KNOX tripped.
Bullet92 said:
Why? I'm in EU (Croatia) and the warranty is void if you have KNOX tripped.
Click to expand...
Click to collapse
http://matija.suklje.name/rooting-and-flashing-your-device-does-not-void-the-warranty-in-eu
http://forum.xda-developers.com/showthread.php?t=2447832
S3miniFin said:
http://matija.suklje.name/rooting-and-flashing-your-device-does-not-void-the-warranty-in-eu
http://forum.xda-developers.com/showthread.php?t=2447832
Click to expand...
Click to collapse
Thanks.. I'll check with Samsung Croatia and the region distributor if the warranty is void if KNOX is tripped.
Ok,good news & thank you !
Bullet92 said:
Thanks.. I'll check with Samsung Croatia and the region distributor if the warranty is void if KNOX is tripped.
Click to expand...
Click to collapse
Ok, I've checked with all distributors (3) and directly with Samsung Croatia and all off them had the same answer. Your warranty is void if you have KNOX tripped.
That doesn't mean all over EU is like in my banana country but just first check with everyone before you touch your KNOX flag.
KNOX warranty void was the reason why I bought LG G2 now and going to sell S4Mini. Enjoy guys and again, if you're planning to change the K-flag, check everything about warranty conditions in your country.
Hi,
Do you check Autore boot and F. Reset Time?
Thx
I have a question for my friend : Flashing newest ROM with Odin (with check the box F Reset Time), without root the phone,Knox will be triggered and he lost the warranty ?
Knox warranty at this moment it is 0x0.
Thank you,
RobinNet1 said:
I have a question for my friend : Flashing newest ROM with Odin (with check the box F Reset Time), without root the phone,Knox will be triggered and he lost the warranty ?
Knox warranty at this moment it is 0x0.
Thank you,
Click to expand...
Click to collapse
If he flashes a stock rom via odin it won't trip knox.
Only rooting a device triggers knox to 0x01
thnx, working ok
I get an error
I get an error which is this: <ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can anyone help?
Rooted Samsung Galaxy S4 GT-I9195 (UCNJ6)
Thank you very much!!!
With your strategy I have successfully rooted my Samsung Galaxy S4 mini with the newest firmware I9515XXUCNJ6.
KNOX is like before root!!!
phedra61 said:
Thank you very much!!!
With your strategy I have successfully rooted my Samsung Galaxy S4 mini with the newest firmware I9515XXUCNJ6.
KNOX is like before root!!!
Click to expand...
Click to collapse
Which firmware do you put on your phone? I tried with the last 4.2.2 firmware (got iti on sammobile) but it doesn't work. odin said: FAIL! Can you link me the firmware you used? I already got the latest 4.4.2 firwarre, odin3.10, device's drivers.
WORKED!Thank you so much.!
Q&A for [ROM][4.3][E2][SM-G7102][GRAND2] GenNxt Pre-Rooted Stock
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][4.3][E2][SM-G7102][GRAND2] GenNxt Pre-Rooted Stock. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Missing applications
Hello guys - need help.
I have flashed by odin GenNxt_Advanced_E2 but im missing google play, wifi and gps notification in upper "status bar"...When i try to add google account i can't since google account option is not available (only samsung, Facbook an twitter accounts are available)...What could go worng? There are too many missing things so definitely it is not a bug of the rom - but dont know what could i do worng?
Also i have noticed now that i can use 3G on sim card 1 while on original 4.3 rom i used 3G on sim card 2 - too many strange things but dont know where to start from...
can installing of new rom in galaxy grand 2 v4.3 will replaced lost app??
good mam/sir
I am new in this rooting procedure so i accidentally root my galaxy grand 2 v4.3 using a wrong root procedure, then my galley application went not responding it says (com.sec.android.gallery3d is not responding). when i get root access i thought it may come back but suddenly it stays the same. so now i am wondering if it is possible to get back the gallery app by flashing a new rom in my device.
Please helm me..
Thanks to balliboxer..
Hi all!
I just get a new grand 2, so i'm very noob. i hope u guys can help me to answer some questions below:
-First, My grand 2 is running 4.4.2 but i feel it is very hot. performance is poor in web browser.some lag when pull down notification panel. Stand by time is suck. With the same process, Moto G is much better and doesnt get hot.
So, is the problem related to Rom? if i downgrade to 4.3, will it be better? ( I heard that 4.4.2 rom is suck with many errors)
- Second, i just want to know that if i can run this Rom or not? Cause my grand 2 is totally "virgin". Will flashing this rom via Odin be ok?
Thks for answer and help !
hii... i m trying to flash genext s5 zip on my rooted grand 2 via cwm but it faild... how to flash it plz help.... i m new in this field so elobrate it for me ?
I'm not a robot
hey bro after doing every thing just as you have posted in the post,and flash with your updated rom and everything my phone is just showing me the starting screen only. i have waited for 4 hours but nothing is happening what should i do????
Hello
I am on 4.3 Jb g7102ztuang1...can I flash this rom???
And any bugs in this rom?? Like wifi ... dual sim... messaging. . Call camera? ?
Any thing which is not working perfect. ..
Waiting for ur good reply
Thanks
hi
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GenNxt_Advanced_E2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
what to do now?
why does it tells me it fails all the time i did all the steps but the odin tells me fail
hi
Balli bro I flashed this rom
But it makes onlh one change and that it roots my mobile but nothing else....what should I do now.....it becomes to hot after a little use....Please give me solution
M waiting for ur reply
Grand 2
i am using custom rom based on android kitkat 4.4.2
can i install this rom
Anyone knows how to move the clock to the stock position? Thanks
Sent from my Note3
thank you
Thank you but not downlod
i can't install
Sir my name is sushil and i am trying to install but i can't can u help me my phone is root i use ur 1st rom but this time i can't
plz help me or if possible plz upload video
Plzz help I want install it but Odin give error plzzzzzzz help
Sent from my unknown using XDA Free mobile app
im not able to flash this rom
i did it everything according to the instructions ...
i was using gennxt s5 project rom ..
n nw i flashed this rom..
shud i hve to flash this rom while using stock rom or is it ok if i flash this on to gennxt S5 rom??
can i use this rom after cm11..do degrading cause any problems..rply pls
---------- Post added at 04:38 PM ---------- Previous post was at 04:29 PM ----------
sapycool0 said:
i did it everything according to the instructions ...
i was using gennxt s5 project rom ..
n nw i flashed this rom..
shud i hve to flash this rom while using stock rom or is it ok if i flash this on to gennxt S5 rom??
Click to expand...
Click to collapse
wats the error msg shown bro..
I Stuck in boot logo
I Stuck in boot logo what should i do?
What is n4 rom?
Sent from my SM-A500H using XDA Free mobile app
Hi
1st of all i have to say thnk you very much for your work, it's the best rom that i have tested in my G7102,
but there is some bugs that is annoying me, so please somebody help .
1- My Snote app starts correctly but when I select the account to It closes.
2- In Action Memo App I have the same problem it starts correctly but when is touch the plus icon on right up corner it closes too.
3- In activity zone app when I press the exercise It stops working.
4- My SNS app does not work correctly when it wants to have access to my twitter of facebook acccount for example it says login failed please try later.
All other apps work smooth and correct.
So please help me.
thanks
Hello every body here :
i have an S5 G900f have an old lollipop 5.0 which i dosn't like
so i went to choose an earliest firmware 5.0 from sammobile
when i try to install it using ODIN i get the error message below
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
searching for this in google say that the solution is to uncheck reactivation lock under security setting
the problem i can nnot find it in my s5
no reactivation lock under security setting
any help thank's
Are you sure you are running stock Lollipop?
And are you sure it is a G900F?
Check in download mode what it says the model is
*Detection* said:
Are you sure you are running stock Lollipop?
And are you sure it is a G900F?
Check in download mode what it says the model is
Click to expand...
Click to collapse
strange my download mode says it is G900P
but under about my device or when i remove the battery it says G900F
jamel-o said:
strange my download mode says it is G900P
but under about my device or when i remove the battery it says G900F
Click to expand...
Click to collapse
A lot of S5s are mislabelled - your device is the G900P
*Detection* said:
A lot of S5s are mislabelled - your device is the G900P
Click to expand...
Click to collapse
So i should download the firmware version for G900P andtry again
Yep, can't remember if Lollipop locks the bootloader on the G900P or not, but you should be able to 'upgrade' at least if it does
You must ALWAYS believe your phone's download screen model name
Enviado desde mi SM-G900F mediante Tapatalk
can i upgrade my firmware using samsung kies !!? which model i put ?
it says that it can not verify my model S/N
What ROM version is running on the phone at the minute?
Post a screenshot of Phone INFO Samsung
https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo&hl=en
Firmware section
Baseband version :
G900FXXU1BOD3
Try the latest for the G900P with ODIN, see how you get on
Looks like whoever you bought it from, has either modded the build.prop to display G900F info, or manage to flash enough of a G900F ROM to show that info
I can flash a G900T ROM without the bootloader and modem, and it shows G900T on my phone, but the phone is G900F
Either way, if download mode says G900P, that's your model
*Detection* said:
Try the latest for the G900P with ODIN, see how you get on
Looks like whoever you bought it from, has either modded the build.prop to display G900F info, or manage to flash enough of a G900F ROM to show that info
I can flash a G900T ROM without the bootloader and modem, and it shows G900T on my phone, but the phone is G900F
Either way, if download mode says G900P, that's your model
Click to expand...
Click to collapse
thank's man i will try the latest firmware for G900P and see
the update work now when i use a G900P Firmware
but seems that he IMEI has changed !!
and the Hands free activation appear !!!
my phone became not activated !!?
what happen i don't know
jamel-o said:
the update work now when i use a G900P Firmware
but seems that he IMEI has changed !!
and the Hands free activation appear !!!
my phone became not activated !!?
what happen i don't know
Click to expand...
Click to collapse
If you flashed a stock Samsung ROM, whatever was done to your phone prior to flashing this ROM is the problem - if it says G900P in download mode, and G900F in About and on the sticker, someone had changed something in order to make it look like a G900F (Likely because they are more popular)
Google how to disable hands free activation, there are youtube videos and forum posts about it
i can not find the hotspot future !!!
under more network or anywhere else
*Detection* said:
Google how to disable hands free activation, there are youtube videos and forum posts about it
Click to expand...
Click to collapse
do you have any idea why i can't find the hotspot future
thank's
Maybe it's not available for that ROM, the G900T firmware doesn't have Mobile Data toggle, but the G900F firmware does (Same phone)
*Detection* said:
Maybe it's not available for that ROM, the G900T firmware doesn't have Mobile Data toggle, but the G900F firmware does (Same phone)
Click to expand...
Click to collapse
i need to use a costum rom from the forum for that ?
jamel-o said:
i need to use a costum rom from the forum for that ?
Click to expand...
Click to collapse
Or find an app, check the play store, might find one that can make a hotspot
Ok I don't even know where to start. The s4 i9507 model is a specific model of the s4 released in Australia on optus network. From what I understand, it is the exact same phone as the s4 i9505. What I am trying to do is flash an unbranded ROM (xsa) for the i9505 onto the i9507. I downloaded the firmware from sammsmobile, but while trying to flash the phone it keeps coming up <ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth).
I don't understand why this may be happening. I have rooted the phone, I have read other forums that suggest to wipe the phone altogether?
P.S please only helpful suggestions, I don't need anyone telling me it's not a good idea to flash a ROM that's meant for another version because the i9505 and i9507 are the exact same phone/specs.
Anyone?
Flash i9507 stock firmware.
Sent from my ASUS_Z00AD using XDA Labs
steveracer said:
Ok I don't even know where to start. The s4 i9507 model is a specific model of the s4 released in Australia on optus network. From what I understand, it is the exact same phone as the s4 i9505. What I am trying to do is flash an unbranded ROM (xsa) for the i9505 onto the i9507. I downloaded the firmware from sammsmobile, but while trying to flash the phone it keeps coming up <ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth).
I don't understand why this may be happening. I have rooted the phone, I have read other forums that suggest to wipe the phone altogether?
P.S please only helpful suggestions, I don't need anyone telling me it's not a good idea to flash a ROM that's meant for another version because the i9505 and i9507 are the exact same phone/specs.
Click to expand...
Click to collapse
So is the GT-I9515, yet ROMs from GT-I9505 don't work on it.
Anyway, your problem may be a result of a faulty USB connection or cable. In other words, father USB wants to try another woman's hole
krasCGQ said:
Flash i9507 stock firmware.
Sent from my ASUS_Z00AD using XDA Labs
Click to expand...
Click to collapse
There is no unbranded stock rom for the i9507. It was released specifically for optus australia and asia. So the only stock rom i can get still has the telco's logos on boot up and shut down, I did see if i could find the file to delete them but couldn't see it anywhere
steveracer said:
Ok I don't even know where to start. The s4 i9507 model is a specific model of the s4 released in Australia on optus network. From what I understand, it is the exact same phone as the s4 i9505. What I am trying to do is flash an unbranded ROM (xsa) for the i9505 onto the i9507. I downloaded the firmware from sammsmobile, but while trying to flash the phone it keeps coming up <ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth).
I don't understand why this may be happening. I have rooted the phone, I have read other forums that suggest to wipe the phone altogether?
P.S please only helpful suggestions, I don't need anyone telling me it's not a good idea to flash a ROM that's meant for another version because the i9505 and i9507 are the exact same phone/specs.
Click to expand...
Click to collapse
The only helpful solution here is to flash a custom ROM. Attempting to install I9505 firmware on the I9507 will always fail as Odin compares the firmware to the device. Odin will refuse to install the firmware if there is a mismatch.
Strephon Alkhalikoi said:
The only helpful solution here is to flash a custom ROM. Attempting to install I9505 firmware on the I9507 will always fail as Odin compares the firmware to the device. Odin will refuse to install the firmware if there is a mismatch.
Click to expand...
Click to collapse
Funny you say that because odin recognizes the device as an i9505 not what it actually is (i9507)
steveracer said:
Funny you say that because odin recognizes the device as an i9505 not what it actually is (i9507)
Click to expand...
Click to collapse
And yet, Odin rejects it, meaning a mismatch. Ergo, Odin is doing its job and rejecting the ROM you're attempting to install. Therefore the only viable solution is to install a custom ROM.
Could u recomend one thats not full of bloatware? I tried cyanogenmod 13 and it was terrible
steveracer said:
Could u recomend one thats not full of bloatware? I tried cyanogenmod 13 and it was terrible
Click to expand...
Click to collapse
Well, I'd consider the entirety of Cyanogenmod to be bloatware since very little testing is done to the source code. However, if you believe Cyanogenmod to be bloatware, then you clearly want to install an AOSP ROM, as that's about as bloatware free as it gets.
If you want unbranded gt-i9507 the only available is the hk version. You can find the firmware here:
http://updato.com/firmware-archive-select-model?record=38777983479C11E6A0500CC47A44B7B2