Database Users

[RECOVERY] TWRP 3.x for Cube Talk 9X(U65GT)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP 3.x
for Cube Talk 9X (U65GT)​
Disclaimer
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included in this
* recovery before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Always backup your device before flashing any rom/recovery/whatever
*/
​
Introduction
TWRP 3 built from Omnirom 5.1 sources
+ Omnirom 6.0 sources (TWRP 3.0.2)
+ Omnirom 7.1 (TWRP 3.0.3 and 3.1.x)
+ Omnirom 8.0 (TWRP 3.2.1)
+ Omnirom 8.1 (TWRP 3.2.3)
+ Omnirom 9.0 (TWRP 3.3.1)
+ Omnirom 9.0 (TWRP 3.4.0, 3.5.2)
Prebuilt stock kernel
Features
TWRP functions (flash zip, flash img, backup, restore...)
USB OTG, Internal and external SD cards
NTFS support
Know issues
graphics performance is not optimal (swipe gesture is a little slow)
touchscreen response is bad when plugged to AC
?
Changelog
Because of recovery partition size, these features are disabled :
SD Card partitioning
NTFS-3G
screnshots
logcat
Because of these regressions, 3.4.0 is still to be prefered
3.6.0 (2021/12/05) :
Updated TWRP sources from Teamwin 9.0 branch (2021/12/05)
3.5.2 (2021/04/24) :
Updated TWRP sources from Teamwin 9.0 branch (2021/04/20)
Allows flashing Magisk apk
3.4.0 (2020/08/11) :
Updated TWRP sources from Teamwin 9.0 branch (2020/07/30)
Allows flashing Magisk zip
Older versions
3.3.1 (2019/07/07) : updated TWRP sources from Omnirom 90 branch
3.2.3 (2018/08/12) : updated TWRP sources from Omnirom 8.1 branch (2018/08/09)
v0.97 : updated TWRP 3.2.1 sources from Omnirom 8.0 branch (2017/12/08)
v0.68 : updated TWRP 3.1.1 sources from Omnirom 7.1 branch (2017/05/20). Wipes should be faster
v0.25 : updated omnirom sources (2016/06/19). sd-ext is not "storage" anymore
v0.24 : initial TWRP 3.0.2 release - removed
Downloads
latest file from androidfilehost
Installation instructions
3 ways to install this recovery
Using SP Flash Tool
Prerequisites
Install MTK USB Drivers (windows xp/vista/7 - Windows 8/8.1/10 - other windows 10)
SP Flash Tool (howto)
In SP Flash Tool, always use "Download Only" mode when not explicitly asked to do otherwise (you could lose your IMEI/WIFI/BT) or if you don't know what you are doing.
Please do NOT ask about any problem with USB drivers or SP Flash Tool here in this thread, this is not the right place for it as these problems are not related to THIS particular recovery but to YOUR computer setup. There are other threads and/or sites about such problems.
Installation
power off the tablet
launch SP Flash Tool, click on "Download" tab
click "scatter-loading" button and choose the downloaded scatter file (MT6592_Android_scatter-recovery_only.txt is based on KK stock rom)
on the "RECOVERY" line, click the empty "Location", and choose the downloaded recovery img file
click "Download"
plug your tablet on USB
Using previous already installed TWRP
reboot to recovery
"Install"
"Install Image"
choose the recovery img to flash
choose "Recovery" partition
"swipe to confirm Flash"
Using an application (root needed)
such as Rashr
Boot to recovery
Turn your tablet off
Push Power button + Volume- + Volume+ buttons
Keep the buttons pushed untils boot logo appears
Thanks to/Credits
TeamWin
Omnirom
How to compile TWRP touch recovery (Dees_Troy)
TWRP Flags for BoardConfig.mk (MSF Jarvis)
Contributors
pix106
Source Code: https://github.com/pix106/android_device_twrp

Reserved

Cool, thanks! Do you have plans for porting lineage os?

6opo9a said:
Cool, thanks! Do you have plans for porting lineage os?
Click to expand...
Click to collapse
Nope, I only built recovery for this tablet.
FYI, there is already a ported CM13 on 4pda

Hello everybody. could someone give the link of the ported CM13 (on 4pda) for our device?

AGBOHOU said:
Hello everybody. could someone give the link of the ported CM13 (on 4pda) for our device?
Click to expand...
Click to collapse
Search 4pda instead of spamming a TWRP thread...

Many thanks for this, pix106.
........
P34c3
.....
...

TWRP 3.2.3 update is available in "Downloads" tab

AGBOHOU said:
Hello everybody. could someone give the link of the ported CM13 (on 4pda) for our device?
Click to expand...
Click to collapse
There are CM13 but also RROS v5.7.4 (both Android 6.0.1), see:
https://www.getdroidtips.com/resurrection-remix-cube-talk-9x/
http://freaktab.com/forum/mtk-based...s-recoverys-mods-etc-list?p=748059#post748059

zgfg said:
There are CM13 but also RROS v5.7.4 (both Android 6.0.1), see:
https://www.getdroidtips.com/resurrection-remix-cube-talk-9x/
http://freaktab.com/forum/mtk-based...s-recoverys-mods-etc-list?p=748059#post748059
Click to expand...
Click to collapse
Guys, this a twrp thread, not a general thread, please behave, or create a general thread if you want general talk.

Thank you very much ¡¡

TWRP 3.3.1 build is up

Thank you

TWRP 3.4.0 build is up

TWRP 3.5.2 build is up

TWRP 3.6.0 build is up

[UNOFFICIAL]PitchBlack Recovery for Sirius

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
*Disclaimer
*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
Introduction
Pitch Black Recovery is a fork of TWRP with many improvements to make your experience better. It's more flexible & easy to use.
Based on TWRP version: 3.3.1
PitchBlack version: 2.9.0
For device: Sirius
Maintainer/Authors build: @zakwanPHG
PitchBlack Source Code: https://github.com/PitchBlackRecoveryProject
PitchBlack Team: @rezaadi0105, @firewolfxda, @manjot.gni, @androiabledroid, Arbaz Khan
Features
Supports Treble and non-Treble ROMs
Up-to-date Pie kernel, built from sources
Full dark theme with changeable accents
Reorganized menus
MIUI OTA support
Disable DM Verity
Use AromaFM as default file manager
Various tools are include
Universal flash-able file for all variant of a device
Many bug fixes & optimization & much more
Click to expand...
Click to collapse
Installation Instructions
From previous version or other recovery
Download the PitchBlack zip to your device
Reboot to your current custom recovery
Flash the PitchBlack zip
The device will automatically reboot into PitchBlack Recovery after installation
Enjoy
From PC(Windows & Linux)
Download PBRP PC Installer zip from bellow
Download PitchBlack Recovery flashable zip from bellow
Extract the PBRP PC installer zip & copy the flashable zip to the installer folder
Goto fastboot mode in your device
Windows users open pbinstaller.bat file
Linux users execute pbinstaller.sh in a terminal
Follow the introductions on the installer from there
Enjoy
(LInux users will need unzip, adb & fastboot installed on their system)
Changelog
Code:
v2.9.0
- Update kernel
- Update DM Verity Logic
- Update magisk
- Update unroot magisk
- Some bug fixed
Downloads
Flashable zip
Download PitchBlack
Version Information
Status: Beta
Created: 2019-06-23
Last Updated: 2019-06-23

Device side Changelog :
23-06-19
* Initial build
* Fix vibration
* Add notched
* Magisk 19.3 included
* Fix brightness

Works great. Thx.

bro when i install it by twrp and reboot phone to recovery mode stuck at logo Mi why....my rom official rom cn 10.2.2 .

Android Alsafa7 said:
bro when i install it by twrp and reboot phone to recovery mode stuck at logo Mi why....my rom official rom cn 10.2.2 .
Click to expand...
Click to collapse
Use china beta/dev rom only

zakwanPHG said:
Use china beta/dev rom only
Click to expand...
Click to collapse
thanks bro?+do u have telegram please massage me @ali_b4

can i install it on miui eu??

Android Alsafa7 said:
can i install it on miui eu??
Click to expand...
Click to collapse
Yes, you can

Don't know why always stuck at pitch black logo for me. All version. I'm using twrp 9.4.23

Does not fully boot, stuck at Pitchblack screen adb server is open on the phone though

Which rom you on?its base twrp dev 0423

Surmoka said:
Does not fully boot, stuck at Pitchblack screen adb server is open on the phone though
Click to expand...
Click to collapse
Yeah, same thing happened to me too. Maybe, kind of an encryption issue. Below is the way I got it to work:
- Go to the fastboot mode and install a TWRP. I used this installer by @TacoNikky.
- Go to TWRP and wipe all the data (not the factory reset though).
- Copy the Pitch Black recovery zip to your storage and flash it.
- Now try booting to PitchBlack. It should boot up just fine. Cheers.
BTW, all of this I did was over the official MIUI, and the stock recovery.

Work great without problem for me... Thanx dev

Trần Anh VN said:
Don't know why always stuck at pitch black logo for me. All version. I'm using twrp 9.4.23
Click to expand...
Click to collapse
mình cũng vậy

Looking for some help/input. I installed this and it's stuck on the splash screen.
I tried to install a different TWRP using the below command but it tells me I don't have fastboot. The instructions in post 12 won't work because of this, anyone able to point me in the right direction?
fastboot flash recovery twrp.img

BJozi said:
Looking for some help/input. I installed this and it's stuck on the splash screen.
I tried to install a different TWRP... in the right direction?
fastboot flash recovery twrp.img
Click to expand...
Click to collapse
What do you mean, you don't have fastboot?

tanjir.h said:
What do you mean, you don't have fastboot?
Click to expand...
Click to collapse
Pc doesn't have it, I fixed that but I can't get anything to flash. I started a new thread here https://forum.xda-developers.com/mi-8-se/help/problems-installing-twrp-t3967968

BJozi said:
Pc doesn't have it, I fixed that but I can't get anything to flash. I started a new thread here https://forum.xda-developers.com/mi-8-se/help/problems-installing-twrp-t3967968
Click to expand...
Click to collapse
Try to see if your fastboot command works or not by typing
fastboot devices

It listed a device by number, that's why I'm not sure what's up. I'll try the flash tool this eve as per my other thread. Thanks for your help!

BJozi said:
It listed a device by number, that's why I'm not sure what's up. I'll try the flash tool this eve as per my other thread. Thanks for your help!
Click to expand...
Click to collapse
It's totally fine. It recognized your device. :good:

[RECOVERY] TWRP 3.x for Lenovo Tab2 A7-20F (MT8127)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP 3.x
for Lenovo Tab2 A7-20F
(MT8127 only)​Disclaimer
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included in this
* recovery before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Always backup your device before flashing any rom/recovery/whatever
*/
​Introduction
TWRP 3 built from Omnirom 5.1 sources + Teamwin 9.0 (TWRP 3.4.0, 3.5.2)
Prebuilt stock 3.10.54 kernel
Features
TWRP functions (flash zip, flash img, backup, restore...)
USB OTG, Internal and external SD cards
NTFS support
Crypto enabled (don't know if it works though)
Extra languages
Changelog
3.6.2 (2022/07/22) :
Updated TWRP sources from Teamwin 9.0 branch (2022/07/22)
Older versions
3.6.1 (2022/03/16) :
Updated TWRP sources from Teamwin 9.0 branch (2022/03/13)
3.6.0 (2021/12/05) :
Updated TWRP sources from Teamwin 9.0 branch (2021/12/05)
3.5.2 (2021/04/24) :
Updated TWRP sources from Teamwin 9.0 branch (2021/04/20)
Allows flashing Magisk apk
3.4.0 (2020/08/11) : updated TWRP sources from Teamwin 9.0 branch (2020/07/30)
Allows flashing Magisk zip
Downloads
latest file from androidfilehost
If you use an unmodified stock KK or LP rom, stock recovery will be self installing again unless you flash KK_LP_no_stock_recovery.zip patch.
In TWRP, you need to be sure that "Mount system partition read-only" is unchecked in "Mount" menu before flashing this patch
Installation instructions
3 ways to install this recovery
Using SP Flash Tool
Prerequisites
Install MTK USB Drivers (windows xp/vista/7 - Windows 8/8.1/10 - other windows 10)
SP Flash Tool (howto)
In SP Flash Tool, always use "Download Only" mode when not explicitly asked to do otherwise (you could lose your IMEI/WIFI/BT) or if you don't know what you are doing.
Please do NOT ask about any problem with USB drivers or SP Flash Tool here in this thread, this is not the right place for it as these problems are not related to THIS particular recovery but to YOUR computer setup. There are other threads and/or sites about such problems.
Installation
power off the tablet
launch SP Flash Tool, click on "Download" tab
click "scatter-loading" button and choose the downloaded scatter file (MT8127_Android_scatter-recovery_only.txt is based on LP stock rom)
on the "RECOVERY" line, click the empty "Location", and choose the downloaded recovery img file
click "Download"
plug your tablet on USB
Using previous already installed TWRP
reboot to recovery
"Install"
"Install Image"
choose the recovery img to flash
choose "Recovery" partition
"swipe to confirm Flash"
Using an application (root needed)
such as Rashr
Boot to recovery
Turn your tablet off
Push Power button + Volume- + Volume+ buttons
Keep the buttons pushed untils boot logo appears
Thanks to/Credits
TeamWin
Omnirom
How to compile TWRP touch recovery (Dees_Troy)
TWRP Flags for BoardConfig.mk (MSF Jarvis)
Contributors
pix106
Source Code: https://github.com/LenovoTab2A7[/hide]

Reserved

pix106 said:
Hi,
2 days ago I got a second-hand A7-20... so i built TWRP for it yesterday
TWRP XDA thread is created ...but file upload is broken... so i can't upload the recovery image yet.
Would you please try to flash magisk zip (normal install)....
Cheers
Click to expand...
Click to collapse
Just found this thread and subscribed, but it won't load in Labs app for now (in traditional XDA fashion). [Edit: loads in Labs now]
Anyway, Fantastic!
Put your twrp and Magisk 20.4 stable on USB and booted old twrp (yours, for tb2 A7-10), sees USB storage fine, flashed new A7-20 twrp, rebooted - no problem - sees USB storage, flashed Magisk 20.4 no problem, booted system, Magisk SU and manager installed and basic functions working fine!
Many thanks. Please let me know re any further information you have or refinements you make for this tablet!
All best with TB2 A7-20, kind regards, PW

TWRP 3.4.0 build is up

Any suggestion where to find newer ROM for this device?

pix106 said:
TWRP 3.x for Lenovo Tab2 A7-20F (MT8127)
Only for Tab2 A7-20F MT8127 variant​
Disclaimer
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included in this
* recovery before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Always backup your device before flashing any rom/recovery/whatever
*/
Introduction
TWRP 3 built from Omnirom 5.1 sources
+ Teamwin 9.0 (TWRP 3.4.0)
Prebuilt stock 3.10.54 kernel
Features
TWRP functions (flash zip, flash img, backup, restore...)
USB OTG, Internal and external SD cards
NTFS support
Crypto enabled (don't know if it works though)
Extra languages
Know issues
wrong idVendor and idProduct
?
Changelog
3.4.0 (2020/08/11) : updated TWRP sources from Teamwin 9.0 branch (2020/07/30) - Allows flashing Magisk zip
Downloads
latest file from AFH
If you use an unmodified stock KK or LP rom, stock recovery will be self installing again unless you flash KK_LP_no_stock_recovery.zip patch.
In TWRP, you need to be sure that "Mount system partition read-only" is unchecked in "Mount" menu before flashing this patch
Installation instructions
3 ways to install this recovery
Using SP Flash Tool
Prerequisites
Install MTK USB Drivers (windows xp/vista/7 - Windows 8/8.1/10 - other windows 10)
SP Flash Tool (howto)
[*][*]In SP Flash Tool, always use "Download Only" mode when not explicitly asked to do otherwise (you could lose your IMEI/WIFI/BT) or if you don't know what you are doing.
Please do NOT ask about any problem with USB drivers or SP Flash Tool here in this thread, this is not the right place for it as these problems are not related to THIS particular recovery but to YOUR computer setup.
There are other threads and/or sites about such problems.
Installation
power off the tablet
launch SP Flash Tool, click on "Download" tab
click "scatter-loading" button and choose the downloaded scatter file (MT8127_Android_scatter-recovery_only.txt from Download Tabs is based on LP stock rom)
on the "RECOVERY" line, click the empty "Location", and choose the downloaded recovery img file
click "Download"
plug your tablet on USB
Using previous already installed TWRP
reboot to recovery
"Install"
"Install Image"
choose the recovery img to flash
choose "Recovery" partition
"swipe to confirm Flash"
Using an application (root needed)
such as Rashr
Boot to recovery
Turn your tablet off
Push Power button + Volume- + Volume+ buttons
Keep the buttons pushed untils boot logo appears
Thanks to/Credits
TeamWin
Omnirom
How to compile TWRP touch recovery(Dees_Troy)
TWRP Flags for BoardConfig.mk(MSF Jarvis)
XDA:DevDB Information
TWRP 3.x for Lenovo Tab2 A7-20F (MT8127), Tool/Utility for the Android General
Contributors
pix106
Source Code: https://github.com/pix106/android_device_twrp
Version Information
Status: Alpha
Current Beta Version: 3.4.0
Beta Release Date: 2020-08-11
Created 2020-07-31
Last Updated 2020-08-11
Click to expand...
Click to collapse
Hi just flashed this TWRP on my A7-20F and it's stuck on ´lenovo screen any ideas?

ChingyM said:
Hi just flashed this TWRP on my A7-20F and it's stuck on ´lenovo screen any ideas?
Click to expand...
Click to collapse
try to flash it again with SP Flash Tool.
If you're on stock rom, be sure to boot to recovery (power + volume- + volume+) immediately after flashing it, and flash the KK_LP_no_stock_recovery.zip patch

pix106 said:
try to flash it again with SP Flash Tool.
If you're on stock rom, be sure to boot to recovery (power + volume- + volume+) immediately after flashing it, and flash the KK_LP_no_stock_recovery.zip patch
Click to expand...
Click to collapse
It was all good Just needed patience ! Thanks

TWRP 3.5.2 build is up

TWRP 3.6.0 build is up

TWRP 3.6.1 build is up

Works great! The only problem is that there aren't much roms for this tablet.

TWRP 3.6.2 build is up

thanks, I managed to place the twrp after many years. but I need help with the root, try to flash the Magisk-v24.3.zip and v25.2 but I get an error (ERROR: 1) and it does not install. Would you know which version of magisk can be installed on the LL stock rom (4.4.2)?

This is not a recovery issue, wrong place

KRou705 said:
thanks, I managed to place the twrp after many years. but I need help with the root, try to flash the Magisk-v24.3.zip and v25.2 but I get an error (ERROR: 1) and it does not install. Would you know which version of magisk can be installed on the LL stock rom (4.4.2)?
Click to expand...
Click to collapse
Flash v23 or older.
Sorry for off topic chat.

Nem1x said:
Flash v23 or older.
Sorry for off topic chat.
Click to expand...
Click to collapse
Thanks

[ROM][11][UNOFFICIAL][laurel_sprout][OSS] LineageOS 18.1

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 11, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Downloads :
DO NOT USE TWRP OR ANY OTHER CUSTOM RECOVERY. READ INSTALLATION INSTRUCTIONS BEFORE INSTALLING
SourceForge folder (includes rom, LineageOS recovery image)
OpenGapps
Magisk
Installation :
You MUST have unlocked botloader and running latest stock android 11 on your phone
You can find information about installing and using adb here
1) Flash LineageOS recovery via fastboot using command
fastboot flash boot <name of the file>
2) Reboot to recovery
3) Download copy-partitions-20200903_1329.zip (this script makes sure both slots on your phone uses same firmware by copying it from active to inactive slot and was created by official LineageOS maintainers)
4) Navigate Apply update -> apply from ADB
5) Sideload copy-partitions-20200903_1329.zip using command
adb sideload copy-partitions-20200903_1329.zip
Tap 'continue' on your phone when prompted
6) Perform factory reset
7) Navigate Apply update -> apply from ADB
8) Sideload rom .zip
adb sideload <rom zip name>
9) Reboot recovery (Advanced -> Reboot to recovery)
Now you can sideload gapps or magisk if you need them (recovery might give you a warning about flashing unsigned files, just click second option and installation process will continue)
10) Navigate Apply update -> apply from ADB
11) Sideload rom .zip
adb sideload <zip name>
* For new Magisk versions change file extension to zip to be able to sideload it
12) Tap 'Reboot system now'
Updating to a new version:
1) Reboot recovery
2) Navigate Apply update -> apply from ADB
3) Sideload rom .zip using
adb sideload <rom zip name>
4) Reboot recovery (Advanced -> Reboot to recovery)
Now you need to sideload gapps or magisk if had them installed (recovery might give you a warning about flashing unsigned files, just click second option and installation process will continue)
5) Navigate Apply update -> apply from ADB
6) Sideload .zip package
adb sideload <zip name>
* For new Magisk versions change file extension to zip to be able to sideload it
7) Tap 'Reboot system now'
Notes :
- This is personal build for my own usage, I'm just sharing it
- Custom recoveries, kernels, mods are not supported
Trees :
Common tree: https://github.com/HarukeyUA/android_device_xiaomi_sm6125-common
Device tree: https://github.com/HarukeyUA/android_device_xiaomi_laurel_sprout
Kernel: https://github.com/HarukeyUA/android_kernel_xiaomi_laurel_sprout
Vendor: https://github.com/HarukeyUA/proprietary_vendor_xiaomi

Reserved

What is the difference between this lineageOS and the other android11 firmware one?

antoine62 said:
What is the difference between this lineageOS and the other android11 firmware one?
Click to expand...
Click to collapse
This is OSS build.

@HarukeyUA
Since it's your personal build can you add smart charging feature (cherry pick) please (for battery health) , hope you release next build with smart charging feature plox

1. Bugs?
2. Plans for going official?

Sairagav said:
1. Bugs?
2. Plans for going official?
Click to expand...
Click to collapse
All major features (including, but not limited to wfd, selinux enforcing, L1 drm) are working fine. But there still can be bugs I didn't discover because of my usage pattern and/or availability in my region.
I don't have any plans for official status.

i flashed this rom ... now my phone is dead and will not turn on. :-(
(happened at point 6: "Reboot recovery (Advanced -> Reboot to recovery)")
any tipps for de-bricking anyone?
//edit:
i managed to flash the service-rom via MiFlash... the phone is okay again, and this ROM does also work now.

Typhoon_Master said:
i flashed this rom ... now my phone is dead and will not turn on. :-(
(happened at point 6: "Reboot recovery (Advanced -> Reboot to recovery)")
any tipps for de-bricking anyone?
//edit:
i managed to flash the service-rom via MiFlash... the phone is okay again.
Click to expand...
Click to collapse
Are you sure you had latest Android 11 Firmware in both slots? Which device version do you have (Global, EU)?
Rom boots fine on my global Mi A3 (128/4) upgraded to Android 11 firmware via fastboot flash

Harukey said:
Are you sure you had latest Android 11 Firmware in both slots? Which device version do you have (Global, EU)?
Rom boots fine on my global Mi A3 (128/4) upgraded to Android 11 firmware via fastboot flash
Click to expand...
Click to collapse
Yes. I had the latest official EU Version 12.0.4.0 (Android 11) on my device.
//edit:
however: i then flashed the service-rom from here via MiFlash. The Phone bootet again and i just flashed this rom now and it is working.

New build is up
Changelog:
- LineageOS source sync
- Merged LA.UM.9.1.r1-09100-SMxxx0.0 into kernel
- Kernel version 4.14.223
- Switch to source built perf interface
- Init script upstream from caf
- Updated carrier config from LA.UM.9.11.r1-02800-NICOBAR.0
- Imported dpm properties from stock
Download: SourceForge

Harukey said:
- This is personal build for my own usage, I'm just sharing it
Click to expand...
Click to collapse
Thanks for your work...
- Any screen-shots?
- How is the SOT & overall battery life?

Typhoon_Master said:
The Phone bootet again and i just flashed this rom now and it is working.
Click to expand...
Click to collapse
Did you identify what went wrong at your first try?

XDAnewone said:
Thanks for your work...
- Any screen-shots?
- How is the SOT & overall battery life?
Click to expand...
Click to collapse
XDAnewone said:
Did you identify what went wrong at your first try?
Click to expand...
Click to collapse
Screenshots
Battery life is subjective and depends on your usage pattern
As for second post, I guess they had Android 11 firmware in one slot and Android 10 firmware in another, so when device switched slots it refused to boot due to firmware incompatibility.

XDAnewone said:
Did you identify what went wrong at your first try?
Click to expand...
Click to collapse
I have no idea.
Harukey said:
As for second post, I guess they had Android 11 firmware in one slot and Android 10 firmware in another, so when device switched slots it refused to boot due to firmware incompatibility.
Click to expand...
Click to collapse
Yes could be, but again: I have no idea.

Hi, I would like to know if it is possible to update the system from an old version of your rom without needing to reflash the rom and lose its data ?
Excuse me if my english is bad.
(I flashed the rom yesterday)

Dabrico said:
Hi, I would like to know if it is possible to update the system from an old version of your rom without needing to reflash the rom and lose its data ?
Excuse me if my english is bad.
(I flashed the rom tomorrow)
Click to expand...
Click to collapse
If you coming from 17.1 you must format data.
If you coming from my older 18.1 build you can follow instruction from this thread skipping recovery fastboot flashing and format data steps

Harukey said:
If you coming from 17.1 you must format data.
If you coming from my older 18.1 build you can follow instruction from this thread skipping recovery fastboot flashing and format data steps
Click to expand...
Click to collapse
Thank you
[Edit :] I reinstalled your rom because my phone didn't want to boot after I followed your instructions.

ok if we want to install with twrp

Brand new phone, had 9 so did the OTAa to 10 and 11, then I'm guessing this happened:
Harukey said:
As for second post, I guess they had Android 11 firmware in one slot and Android 10 firmware in another, so when device switched slots it refused to boot due to firmware incompatibility.
Click to expand...
Click to collapse
If your instructions have a decent chance of resulting in a bricked device, it might be helpful to include steps to check or correct that before leading slot-noobs such as myself down the path to no-no-more-bootey-boot-land.
Thanks asshole for my new EDL cable, and the sweet ROM. It's nice, so far I've noticed:
- Phone... Settings... Calling accounts... does not persist between reboots with one SIM and a SIP account; choosing the SIP account as default reverts to the SIM every time. Curiously, with two SIMs inserted, this will persist on any of the three settings between reboots.
- Phone... call recording does not appear to work, blank audio files are created, although this was only tested with a SIP account so may just be a limitation. Also tried Call Recorder by SKVALEX v2.1.0 via Magisk module, same blank audio files.
- fingerprint reader doesn't work, but that's possibly due to my EDL adventure as it booted up after rawprogram4+patch4 and I couldn't get it back into EDL to do 5... so now I'm not really sure what state my device is in, joy.

[ROM][Android 12][sirius] crDroid v8.2 [26.02.2022]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/12.0/README.mkdn
Flashing Instructions:
Pre-installation:
TWRP (Download from here)
gapps (Download from here)
Magisk 20.0 or newer for root (after first boot) - (Download from here)
First time installation:
<!-- change according to your needs -->
Backup your data to PC, OTG flash drive
Now reboot to recovery
Navigate to Factory reset and format data, wipe cache and wipe system
Now reboot to recovery
Flash crDroid zip
Flash recovery from the download link
Reboot to system
Update installation:
<!-- change according to your needs -->
Boot to recovery
Flash a zip with crDroid
Sources:
ROM: https://github.com/crdroidandroid
Kernel: https://github.com/crdroidandroid/android_kernel_xiaomi_sdm710
Download:
ROM https://crdroid.net/sirius>
Changelog: https://raw.githubusercontent.com/crdroidandroid/android_vendor_crDroidOTA/12.0/changelog_sirius.txt
Known issues:
[*]None
Visit official website @ crDroid.net
crDroid sirius Telegram
crDroid Community Telegram
crDroid Updates Channel
Donate to help our team pay server costs

thanks for you great work.

Is the face unlock work?

Yes it is.
-----
Love thise ROM thanks for you great work.
Only thing it miss is buld in call record.

Could anybody get OP's twrp from https://t.me/uixdessDrive/20 and upload to here?
I use latest official TWRP, this ROM installs and works like charm. but I can't boot into twrp ever after, it stuck at TWRP's logo screen forever.
I guess it's because this ROM flashes new keymaster partition which crashes official twrp.
Anyway I should try TWRP posted by OP but can't download from that link. Could anyone help?

NexusRunner said:
Could anybody get OP's twrp from https://t.me/uixdessDrive/20 and upload to here?
I use latest official TWRP, this ROM installs and works like charm. but I can't boot into twrp ever after, it stuck at TWRP's logo screen forever.
I guess it's because this ROM flashes new keymaster partition which crashes official twrp.
Anyway I should try TWRP posted by OP but can't download from that link. Could anyone help?
Click to expand...
Click to collapse
I tried to attach it here but not uploaded i don't know why.

yamabokra01 said:
I tried to attach it here but not uploaded i don't know why.
Click to expand...
Click to collapse
Could you upload it to MEGA?

NexusRunner said:
Could you upload it to MEGA?
Click to expand...
Click to collapse
Don't use it.
I just flash it then I got bootloop + no recovery + no bootloader.
Now I'm trying to open the back of the device to put it in edl mode

yamabokra01 said:
Don't use it.
I just flash it then I got bootloop + no recovery + no bootloader.
Now I'm trying to open the back of the device to put it in edl mode
Click to expand...
Click to collapse
omg wish your device recovered soon
I flashed the ROM using official twrp. It went OK but no longer boot into twrp.
I managed to install magisk without recovery (by patching and fastboot flash boot.img), but can't install gapps without a working recovery.
Maybe I should start over again and try the other A12 ROM with built in gapps. But for now I feel good with this ROM. I think maybe I will try it without gapps for a little longer.

NexusRunner said:
omg wish your device recovered soon
I flashed the ROM using official twrp. It went OK but no longer boot into twrp.
I managed to install magisk without recovery (by patching and fastboot flash boot.img), but can't install gapps without a working recovery.
Maybe I should start over again and try the other A12 ROM with built in gapps. But for now I feel good with this ROM. I think maybe I will try it without gapps for a little longer.
Click to expand...
Click to collapse
I payed 30$ and recovered my mobile.
Then i flashed a rom and for the second time i flashed the recovery again and my mobile again dead

UIxDess said:
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/12.0/README.mkdn
Flashing Instructions:
Pre-installation:
TWRP (Download from here)
gapps (Download from here)
Magisk 20.0 or newer for root (after first boot) - (Download from here)
First time installation:
<!-- change according to your needs -->
Backup your data to PC, OTG flash drive
Now reboot to recovery
Navigate to Factory reset and format data, wipe cache and wipe system
Now reboot to recovery
Flash crDroid zip
Flash recovery from the download link
Reboot to system
Update installation:
<!-- change according to your needs -->
Boot to recovery
Flash a zip with crDroid
Sources:
ROM: https://github.com/crdroidandroid
Kernel: https://github.com/crdroidandroid/android_kernel_xiaomi_sdm710
Download:
ROM https://crdroid.net/sirius>
Changelog: https://raw.githubusercontent.com/crdroidandroid/android_vendor_crDroidOTA/12.0/changelog_sirius.txt
Known issues:
[*]None
Visit official website @ crDroid.net
crDroid sirius Telegram
crDroid Community Telegram
crDroid Updates Channel
Donate to help our team pay server costs
Click to expand...
Click to collapse
Dear, I flashed the rom 3 times and followed the instructions, but I get loopboot + no rom + no recovery + no bootloader, meaning dead device. The from edl flash China Rom.
Do I have to be in certain FW? Or do I have to flash something before I start the process for this ROM??

yamabokra01 said:
Dear, I flashed the rom 3 times and followed the instructions, but I get loopboot + no rom + no recovery + no bootloader, meaning dead device. The from edl flash China Rom.
Do I have to be in certain FW? Or do I have to flash something before I start the process for this ROM??
Click to expand...
Click to collapse
I don't encouter anything special except I can't boot back to recovery after boot into this ROM
I flash FW from sirius_images_V12.5.1.0.QEBCNXM_20210625.0000.00_10.0_cn_0969fb8c9f.tgz (which is the latest stable stock ROM)
And use twrp-3.6.1_9-0-xmsirius.img (which is the latest official twrp from https://twrp.me/) to install crDroidAndroid-12.0-20220226-sirius-v8.2.zip

NexusRunner said:
I don't encouter anything special except I can't boot back to recovery after boot into this ROM
I flash FW from sirius_images_V12.5.1.0.QEBCNXM_20210625.0000.00_10.0_cn_0969fb8c9f.tgz (which is the latest stable stock ROM)
And use twrp-3.6.1_9-0-xmsirius.img (which is the latest official twrp from https://twrp.me/) to install crDroidAndroid-12.0-20220226-sirius-v8.2.zip
Click to expand...
Click to collapse
I will try now and report. Thanks bro

NexusRunner said:
I don't encouter anything special except I can't boot back to recovery after boot into this ROM
I flash FW from sirius_images_V12.5.1.0.QEBCNXM_20210625.0000.00_10.0_cn_0969fb8c9f.tgz (which is the latest stable stock ROM)
And use twrp-3.6.1_9-0-xmsirius.img (which is the latest official twrp from https://twrp.me/) to install crDroidAndroid-12.0-20220226-sirius-v8.2.zip
Click to expand...
Click to collapse
Appreciate it bro. at least I update the device and finished my 3 day fighting with this device

Bro this rom is amazing.
I have found a bug.
Double Tap Screen Wake doesn't work after when screen goes sleep about 10+ second later.
Screen doesn't wake up bro.
God bless you.
Edit
When pocket mode is on, it works fine.

Sure you can highly customize settings with this ROM. But experiences are not good enough. One Setting may collapse another; the number in the battery icon is hard to be recognized...It needs a product manager. If mobile phones get more standardized one day, it may be less hard to mantain a unified UI, just like gnome desktop on PCs.

yamabokra01 said:
I payed 30$ and recovered my mobile.
Then i flashed a rom and for the second time i flashed the recovery again and my mobile again dead
Click to expand...
Click to collapse
my problem is same as yours, how to fix it? I am a student currently I am having difficulty. Help me please.

12