Hi there
It's very strange. My phone is rooted and normally the update to a new version of OxygenOS works without problems. This time (update to 10.3.2) it's different. I use the following process:
Install full OTA version with TWRP
Install TWRP
Reboot
Install Magisk
After rebooting my 6T it shows immediately that there is a system update to version 10.3.2 available. The version I installed seconds ago. I tried full OTA version from several sources including the one from Oneplus itself. Always the same phenomenon.
Any idea what causes this behavior and how to solve it?
nobody has an idea?
e.m.m.a said:
nobody has an idea?
Click to expand...
Click to collapse
Hello, it seems somehow won't flash...
I would racommend to use LOCAL UPDATE to update your rom.
See THIS THREAD, post #3, very useful thread.
Would to thank @Striatum_bdr and @Scott for their awesome work..
Cheers
Try this method
- Flash 10.3.2
- Flash Twrp zip
- Reboot to Recovery
- Again Flash 10.3.2
- Flash Twrp zip
- Now Reboot to System
Sent from my OP6T using Tapatalk
DowneyHere said:
Try this method
- Flash 10.3.2
- Flash Twrp zip
- Reboot to Recovery
- Again Flash 10.3.2
- Flash Twrp zip
- Now Reboot to System
Sent from my OP6T using Tapatalk
Click to expand...
Click to collapse
Quick question:
How do I update when i'm on a patche OOS?
I only have Magisk. No TWRP
Hope you or someone can help me out
JP
Johan.constantin said:
Quick question:
How do I update when i'm on a patche OOS?
I only have Magisk. No TWRP
Hope you or someone can help me out
JP
Click to expand...
Click to collapse
Hey dude,
look at the link i posted above,
it explain exactly what you're looking for.
If you have any further doubts you just have to ask...
Cheers
DowneyHere said:
Try this method
- Flash 10.3.2
- Flash Twrp zip
- Reboot to Recovery
- Again Flash 10.3.2
- Flash Twrp zip
- Now Reboot to System
Sent from my OP6T using Tapatalk
Click to expand...
Click to collapse
Thank you. I will first try this method. does it make a difference if I use the TWRP zip or image to install it? Previously I used img.
And before rebooting system I would install magisk. but that should not affect the uodate, rught?
e.m.m.a said:
Thank you. I will first try this method. does it make a difference if I use the TWRP zip or image to install it? Previously I used img.
And before rebooting system I would install magisk. but that should not affect the uodate, rught?
Click to expand...
Click to collapse
Are you on 10.3.1?
Sent from my OP6T using Tapatalk
DowneyHere said:
Are you on 10.3.1?
Sent from my OP6T using Tapatalk
Click to expand...
Click to collapse
yes
worked. thank you for your help.
Related
Hello there,
I thought that there were more people with this problem, but I've this problem: first off, I got stock MM installed on my Style xt1572. Unlocked bootloader and the latest TWRP. But when I try to install SuperSU via TWRP, it just get stuck before the reboot animation. Any idea's what I could try perhaps?
Edit: Solution is just using the SuperSU in this thread: http://forum.xda-developers.com/moto-x-style/general/xt1572-mm-twrp-root-xposed-t3276792
Thanks.
Did you select install SuperSU when twrp asked ? After flashing newest supersu?
Sent from my XT1575 using Tapatalk
Settler11 said:
Hello there,
I thought that there were more people with this problem, but I've this problem: first off, I got stock MM installed on my Style xt1572. Unlocked bootloader and the latest TWRP. But when I try to install SuperSU via TWRP, it just get stuck before the reboot animation. Any idea's what I could try perhaps?
Thanks.
Click to expand...
Click to collapse
Which SuperSU version are you using?
Settler11 said:
Hello there,
I thought that there were more people with this problem, but I've this problem: first off, I got stock MM installed on my Style xt1572. Unlocked bootloader and the latest TWRP. But when I try to install SuperSU via TWRP, it just get stuck before the reboot animation. Any idea's what I could try perhaps?
Thanks.
Click to expand...
Click to collapse
Men i have the same problem and i dont know what to do :/
@patt yes.
@Doktaphex The one TWRP asked me to install and the latest beta. 2.49. Same problem.
Depending on the version of SuperSU that you are using there are 2 different rooting methods.
My suggestion would be to use the systemless root option here: http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
v2.65 is what you want. When you flash this in twrp it will automatically patch the boot image on your device (whilst also creating a backup of the original). It sounds as though you are both trying to use a version of SuperSU that implements the standard rooting method, this would mean that you must manually flash a modified boot image in order to bypass Android 6.0's internal system modification checks!
Flash the stock boot.img. Then see if it boots. Then ^^^ this^^^
Settler11 said:
@patt yes.
@Doktaphex The one TWRP asked me to install and the latest beta. 2.49. Same problem.
Click to expand...
Click to collapse
Do not allow twrp to attempt to install superSU
IMPORTANT!!!!
Because you have already allowed twrp to do this, you will need to reflash your system partition to ensure that all traces of that version of SuperSU are removed before you flash the newer version.
I hope this helps you guys.
patt2k said:
...
reflash your system partition
....
Click to expand...
Click to collapse
What do you mean with that? We've to reflash a rom, kernel? What?
Settler11 said:
@patt yes.
@Doktaphex The one TWRP asked me to install and the latest beta. 2.49. Same problem.
Click to expand...
Click to collapse
You are not suppose to click install superSU when twrp asks for it.
Sent from my XT1575 using Tapatalk
patt2k said:
You are not suppose to click install superSU when twrp asks for it.
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
Yes.. But as you can see, I've done that already. But I got a restore without it. But even if I install that latest beta, the problem still presumes.
Settler11 said:
What do you mean with that? We've to reflash a rom, kernel? What?
Click to expand...
Click to collapse
Sorry, I should have been more clear in my instructions. I would go ahead and reflash the rom that you want to use and then flash superSU v2.65.
Reboot and if twrp asks if you want it to install superSU choose the option for it NOT to do so.
Settler11 said:
Yes.. But as you can see, I've done that already. But I got a restore without it. But even if I install that latest beta, the problem still presumes.
Click to expand...
Click to collapse
I had this issue but I had backup of my stock rooted rom. I'd suggest maybe go back to stock with restore tool?
Sent from my XT1575 using Tapatalk
patt2k said:
I had this issue but I had backup of my stock rooted rom. I'd suggest maybe go back to stock with restore tool?
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
I'M on stock! And that restore tool is for Pure, not Style! And I don't want to install a custom rom. Stock rom is still fine for me.
Settler11 said:
I'M on stock! And that restore tool is for Pure, not Style! And I don't want to install a custom rom. Stock rom is still fine for me.
Click to expand...
Click to collapse
Idk then sorry I have pure
Sent from my XT1575 using Tapatalk
Also tried Kingo root funny enough, but no go.
Edit: Wow, okay. Installing some kind of version of SuperSU does the trick apparently. It's in here:
http://forum.xda-developers.com/moto-x-style/general/xt1572-mm-twrp-root-xposed-t3276792
I flashed TWRP and SuperSU onto my op2 and now it doesnt want to go further than boot animation (can boot into TWRP and fastboot). any help?
trying to adb sideload the stock rom, serving stuck at 45% what gives?
EDIT: rom was corrupted downloaded another one and it works
anyone know if super su flashing is broken on the latest op2 firmware or is it just me?
What version of SuperSU you flashed ? If you flashed v2.46 then try flashing latest stable built (v2.65) ---> http://download.chainfire.eu/supersu-stable
Sent from my ONE A2001 using XDA-Developers mobile app
B!Gguy said:
What version of SuperSU you flashed ? If you flashed v2.46 then try flashing latest stable built (v2.65) ---> http://download.chainfire.eu/supersu-stable
Sent from my ONE A2001 using XDA-Developers mobile app
Click to expand...
Click to collapse
i tried flashing both latest stable and beta with same result
lpgfinmark said:
i tried flashing both latest stable and beta with same result
Click to expand...
Click to collapse
What Rom you currently on ? What TWRP (Modified or Official) ?
B!Gguy said:
What Rom you currently on ? What TWRP (Modified or Official) ?
Click to expand...
Click to collapse
Already solved: had to download a modified version of superSU.
lpgfinmark said:
Already solved: had to download a modified version of superSU.
Click to expand...
Click to collapse
@lpgfinmark
Which one and where did you get it? What result were you getting? Which recovery were you in when you flashed? I am currently having an issue gaining root on latest firmware on an encrypted phone.
HypnoSquid said:
@lpgfinmark
Which one and where did you get it? What result were you getting? Which recovery were you in when you flashed? I am currently having an issue gaining root on latest firmware on an encrypted phone.
Click to expand...
Click to collapse
This one i found it in the oneplus official forums. When i tried to flash normal SU i were stuck on boot animation but with this one it worked wonderfully. i believe the recovery i were using is the latest Modified TWRP (for op2)
lpgfinmark said:
This one i found it in the oneplus official forums. When i tried to flash normal SU i were stuck on boot animation but with this one it worked wonderfully. i believe the recovery i were using is the latest Modified TWRP (for op2)
Click to expand...
Click to collapse
I can't use adb when using a custom recovery and this one fails for me too when trying to flash with the stock recovery. Thanks anyway!
HypnoSquid said:
I can't use adb when using a custom recovery and this one fails for me too when trying to flash with the stock recovery. Thanks anyway!
Click to expand...
Click to collapse
TWRP has adb sideload support built in, doesn't that work?
hello guys
i am not getting any update after 7.10.14
can any one also facing it
i am rooted with magisk and also twrp is installed
i have also done no. of tweaks on my device
is there any solution to solve it
Red_Man 898 said:
hello guys
i am not getting any update after 7.10.14
can any one also facing it
i am rooted with magisk and also twrp is installed
i have also done no. of tweaks on my device
is there any solution to solve it
Click to expand...
Click to collapse
Same this side. I can see there is an update from the notifications. When I am clicking it.. its not opening.
Sent from my ONEPLUS A3003 using Tapatalk
When you install twrp, forget about updates. You need to flash full stock image using miflash application on Windows. I had the same problem, flashed stock images using miflash and update worked! I did not even lose my phone data.
Edit: Just boot into twrp to flash magisk. Don't flash twrp or system update will fill after downloading.
I was in the same situation (even if i've never flashed twrp).
Solved by flashing 17.10.30 Rom (after that I got the update)
Cheers.
tonycapuozzo said:
I was in the same situation (even if i've never flashed twrp).
Solved by flashing 17.10.30 Rom (after that I got the update)
Cheers.
Click to expand...
Click to collapse
How do I flash this version now ? I am already on 17.10.30
ProudRed said:
How do I flash this version now ? I am already on 17.10.30
Click to expand...
Click to collapse
Well...try re-flashing the same image or wait for the full November Rom.
Cheers
tonycapuozzo said:
Well...try re-flashing the same image or wait for the full November Rom.
Cheers
Click to expand...
Click to collapse
Just the boot image ? Where do I get the extracted boot image ?
If you have done multiple tweaks, I suppose that those were done to system directly. In such case you'll need to flash system partition as well. Both are included in full ROM, just extract them from archive http://en.miui.com/download-333.html.
https://www.youtube.com/watch?v=5Ozdhl-JdvU
give it a try.
If not getting updates (like: Your phone is already update) try to clean Google Service Framework app data from Settings - App - 3 dots on corner - Show system apps
If your device is rooted, then make clean installation of os. There will be ota update.
I am stock not rooted nor unlocked. Ad still stuck no more updates for me
So this week i hadn't time enough to install the august update since my phone is rooted so i decided to do it now. What i did before trying to download the update :
1.Deleted all magisk modules that i had then rebooted
2.Unistalled magisk using restore image then rebooted
3.Went to sys update downloaded and it says installation failed
What do to? I'm not rooted now and i don't have twrp installed.
PS. don't want to install it via fastboot/miflash
Follow this guide in future. https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips
To fix your problem now, find a stock boot image for your update version you are currently on and flash it.
emiljano539 said:
PS. don't want to install it via fastboot/miflash
Click to expand...
Click to collapse
If you don't want to use Miflash (Why ?) you can boot temporary TWRP and flash .zip here:
https://forum.xda-developers.com/showpost.php?p=77353883&postcount=542
sipollo said:
If you don't want to use Miflash (Why ?) you can boot temporary TWRP and flash .zip here:
https://forum.xda-developers.com/showpost.php?p=77353883&postcount=542
Click to expand...
Click to collapse
Do i lose my data if i flash this via twrp?
Idk i don't really trust miflash
emiljano539 said:
Do i lose my data if i flash this via twrp?
Idk i don't really trust miflash
Click to expand...
Click to collapse
You won't lose your data.
ludditefornow said:
Follow this guide in future. https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips
To fix your problem now, find a stock boot image for your update version you are currently on and flash it.
Click to expand...
Click to collapse
flashed the stock boot image tried to install it but again it shows that error , i guess the only thing i can do is to flash it manually via fastboot/miflash
sipollo said:
You won't lose your data.
Click to expand...
Click to collapse
Okay thanks, do i have to remove the magisk and flash the stock boot.img or it doesn't matter?
emiljano539 said:
Okay thanks, do i have to remove the magisk and flash the stock boot.img or it doesn't matter?
Click to expand...
Click to collapse
It doesn't matter. You'll have to reinstall Magisk (if you want to).
sipollo said:
It doesn't matter. You'll have to reinstall Magisk (if you want to).
Click to expand...
Click to collapse
which one should i install from them because there are 2 tissot-T files ( for twrp)
"tissot-T-OPM1.171019.026.8.8.23.zip" or "tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip" ?
emiljano539 said:
which one should i install from them because there are 2 tissot-T files ( for twrp)
"tissot-T-OPM1.171019.026.8.8.23.zip" or "tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip" ?
Click to expand...
Click to collapse
tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip
The other file is the latest beta.
sipollo said:
tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip
The other file is the latest beta.
Click to expand...
Click to collapse
I installed the zip from twrp and now after reboot i am stucked in bootloop now i can't even boot into twrp. What to do?
After i flashed it in the end says:
Failed to mount /system Invalid argument
Which TWRP did you use?
sipollo said:
Which TWRP did you use?
Click to expand...
Click to collapse
the official one. what version should i use?
its funny now that i flashed the stock rom via mi flash tool and now again the installation shows error..
ludditefornow said:
Follow this guide in future. https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips
To fix your problem now, find a stock boot image for your update version you are currently on and flash it.
Click to expand...
Click to collapse
I'm facing same issue and I was following the guide.
Same here, can't install set Ota, even after remove magisk.
Other thing, cell won't show screen to put pin to boot, previous pin of sim so I think encryption is disable!? Any idea?
Is it possible to use the official TWRP app to install on the 6T? Thanks in advance to anyone nice enough to answer ?
Bildo41383 said:
Is it possible to use the official TWRP app to install on the 6T? Thanks in advance to anyone nice enough to answer ?
Click to expand...
Click to collapse
I'm sure it is. I don't see why it wouldn't be seeing how we just got an official TWRP now.
https://www.androidpolice.com/2018/...ble-for-oneplus-6t-moto-z3-and-other-devices/
TheKnux said:
I'm sure it is. I don't see why it wouldn't be seeing how we just got an official TWRP now.
https://www.androidpolice.com/2018/...ble-for-oneplus-6t-moto-z3-and-other-devices/
Click to expand...
Click to collapse
Will I need to reflash majisk as well?
Bildo41383 said:
Will I need to reflash majisk as well?
Click to expand...
Click to collapse
More than likely. A lot of people reported that after flashing Magisk via the zip in TWRP, the phone doesn't boot until you flash Magisk. I as well encountered this issue. If you flash TWRP and reboot recovery and then reboot to system you'll be stuck with a recovery loop until you flash Magisk. Hope this helps.