Recently i am tested this work on our beloved htc 10 with RR os rom and android 7.1.2 ....and it seems works fine
as respect to the developer of this project i attached a link to his thread :http://forum.xda-developers.com/oneplus-3/themes/port-oxygenos-stock-camera-cm-t3451721
Some of features that i tested :
1) burst shot
2)slow motion
3)time lapse
4)video recording (4k -1080p -720p)
5)panorama is not working
Hope you enjoy
You just simply flash the camera zip file?
OxygenOS camera works on PureNexus ROM. For those of you on PureNexus, wait until the vidoe issues get sorted out for video to work flawlessly.
ali nz said:
You just simply flash the camera zip file?
Click to expand...
Click to collapse
Just Install as normal apps. Don't flash marshmallow's camera flashable zip !
HQ mode doesn't work. Snapdragon Camera lacks of feature and image quality for me
aligh2014 said:
Recently i am tested this work on our beloved htc 10 with RR os rom and android 7.1.2 ....and it seems works fine
as respect to the developer of this project i attached a link to his thread :http://forum.xda-developers.com/oneplus-3/themes/port-oxygenos-stock-camera-cm-t3451721
Some of features that i tested :
1) burst shot
2)slow motion
3)time lapse
4)video recording (4k -1080p -720p)
5)panorama is not working
Hope you enjoy
Click to expand...
Click to collapse
Thanks for sharing works greats on sense rom like viper 5.10 ....except the panorama
We also need camera hal1 enabler?
HTC 10 Matte Black Power
tested on DU,works fine,thank u for sharing:good:
any reason why would you prefer the camera in OxygenOS over than the stock one?
THIS IS ALPHA TEST BUILD PLEASE REPORT BACK AFTR FLASHING IT
THANKS HITO FOR BASE :-
MODDED BY ME
(only for 3t users)
BASED ON ZUI V2.5
BUGS:- NO ALERT SLIDER
NFC NOT WORKING
FRONT CAMER OF ZUI WILL GIVE FC USE ANOTHER CAM
PREROOTED SUPERSU WILL AUTOMATICALLY FLASH
INSTALL GAPPS VIA GOOGLE INSTALLER
OR FLASH THESE GAPPS AFTR BOOTING ROM REBOOT TO RECOVERY:-
https://drive.google.com/open?id=0B2CwNmLth6cUc0kzbWNuQWNPeWs
[QRCODE]
CHANGELOG V1:-
update zui official latest 2.5.470
Optimize the system power consumption
FIXED CRASHES
ADDED DASH CHARGING
OTHERS OPTIMIZATION
[/QRCODE]
Alpha builds bugs will be there :-
DOWNLOAD LINK HERE:-
https://drive.google.com/open?id=0B2CwNmLth6cUS0NkaWF6WFdRVkk
Dear Dev, Glad you shared the ROM. Upload Screenshots and Brief some Features please.
great thing man! many of us are looking out for a stable port of MIUI, ZUI, Flyme based on Android 7.0 and above and finally you come around with this. Thanks! If you need any help, let me know.
What's ZUI? ^^
Google installer v2 completes the process but u cannot open play store always stuck up white screen
ashokmor007 said:
Google installer v2 completes the process but u cannot open play store always stuck up white screen
Click to expand...
Click to collapse
Did you tired clearing data of playstore and google play services and rebooted?
https://mega.nz/#F!Vl4H2ITT!SyWEXLyzh1O6QlrtgIv50g
use this version and afr installing enable all permissions then run it
you are techibee guy right ? i love your videos would be glad if you make one on this
Dhairya said:
Did you tired clearing data of playstore and google play services and rebooted?
https://mega.nz/#F!Vl4H2ITT!SyWEXLyzh1O6QlrtgIv50g
use this version and afr installing enable all permissions then run it
you are techibee guy right ? i love your videos would be glad if you make one on this
Click to expand...
Click to collapse
Sure will review this by evening ... testing it..
ashokmor007 said:
Sure will review this by evening ... testing it..
Click to expand...
Click to collapse
thanks a ton bro here is the gapps file if all above things fail then flash modded gapps aftr booting rom
https://drive.google.com/open?id=0B2CwNmLth6cUc0kzbWNuQWNPeWs
is volte working on this ROM?
The download link for the rom isn't valid anymore. Can you reupload it?
Dhairya said:
THIS IS ALPHA TEST BUILD PLEASE REPORT BACK AFTR FLASHING IT
THANKS HITO FOR BASE :-
MODDED BY ME
(only for 3t users)
BASED ON ZUI V2.5
BUGS:- NO ALERT SLIDER
NFC NOT WORKING
FRONT CAMER OF ZUI WILL GIVE FC USE ANOTHER CAM
PREROOTED SUPERSU WILL AUTOMATICALLY FLASH
INSTALL GAPPS VIA GOOGLE INSTALLER
OR FLASH THESE GAPPS AFTR BOOTING ROM REBOOT TO RECOVERY:-
https://drive.google.com/open?id=0B2CwNmLth6cUc0kzbWNuQWNPeWs
[QRCODE]
CHANGELOG V1:-
update zui official latest 2.5.470
Optimize the system power consumption
FIXED CRASHES
ADDED DASH CHARGING
OTHERS OPTIMIZATION
[/QRCODE]
Alpha builds bugs will be there :-
DOWNLOAD LINK HERE:-
https://drive.google.com/open?id=0B2CwNmLth6cUS0NkaWF6WFdRVkk
Click to expand...
Click to collapse
link not available
Hi.... Please give additional description of what's working and what's not.
Major concerns of most porter roms
1. Battery backup, heating issues
2. Alert slider and finger print
3. Camera and camcorder
4. Volte and signal drops
5. Ram management.
Provide some screenshots if possible..
Small request. Can someone confirm is custom kernel like Blackbird or Radioactive are working on this rom. It would be awesome.
@Dhairya any link for downloading
Hello OP....
Is this Rom dead?
Thx. for answers ( I know you are on "more OS" working, so only a question....)
SuperNOVA-N
Bixby
Edge Panels
Power planning
Performance Mode
HDR Camera
Clock set in center of status bar
Samsung Account
Time Update
Aroma Installer
Pre Root Magisk v13.6
Video Link : [mod edit - link removed
thread closed
Sir rom are best but some problam
Volte sometimes appear and disappear ao often calling is not done propely
Pls fix this problam
FiX for MIUi 10 now!! ( xiaomi. eu Beta and global Beta Pie roms fix!!!!) (scroll to the end of post)
Update 23.12.2018. thanks to @dianluitao @EnesSastim and couple more people we have working GCam on MIUI 10 8.1
07.07.2019. *****UPDATE********
So for now cam2api is not buuged anymore on Pie roms (for now only beta) and here I will post how and files to go from 0 to full working GCam.
As usually you will need twrp and magisk or just magisk.
Flash in magisk file attached to enable Cam2api
Install recommended GCam (I am using it it doesn't mean it is the best one for you too)
Also there is file with preloaded GCam settings for easy use. How to load it? Well first open file explorer and make folder >>>GCam than make another inside of it >>>Configs than copy/paste Configs html file in it and not go and start GCam app, click couple of times on black area (around shutter button) option menu named :Choose confog pick the one you copy pasted in GCam folder and click Restore. Just to make sure close GCam clear from memory and open again. Settings is loaded and you are ready to use it.
Also thanks to @uvera we have this fix and thanks to all people involved in making GCam ports of html pre loaded settings for it.
Don't be twat, press that *****Thanks***** button below since I know you are all cheap m.... F.... and there will be 0 donations Cheers mates!
P. S. I have some troubles with attaching the files give me some time to work it out. Will update post during the day.
23.12.2018. Update - You will need china stable or miui.eu rom 10.2.3.0 for this to work ( I personal tested it on eu rom) all yopu need it root explorer, build prop editor and 2 files.
1) Download camera.sdm660.so and copy/paste it via root explorer into vendor/lib/hw/ and replace old file ( I used solid explorer to do so also you will need magisk since you need to give solid explorer root privileges ) (.so file is in zip so yes you need to extract it first than copy that file and replace it with old one).
2)go to build prop editor give it root privbileges and add this line : persist.camera.HAL3.enabled=1 (persist.camera.HAL3.enabled and in value box add 1) save it and restart phone
3) after this you will need to flash front camera fix to make front camera working. fix and rest of the files are at the end of this post !
Once again thanks to @dianluitao @EnesSastim @WebDingo and @Savitar (webdingo and savit for front camera fix) and all people responsable for this fix. :highfive:
Hi, I just want to make guide - simple step by step tutorial that people can follow and install GCam on our Mi Note 3 - Jason device. EVERYTHING you do is your own responsibility and I am not to be blamed if something goes wrong while you do so.
1. You NEED a rooted phone, for now, this ONLY works on rooted phones.
2.You need TWRP since you need to flash magisk and camera2api from there. Link to magisk >>> https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Thanks to @topjohnwu
3.Now when you flashed latest magisk you will need to do the same with camera2api (file will be at the end of this thread). Thanks to @uvera00
4.Now you can restart your device and install GCam apk from here >>>> https://www.celsoazevedo.com/files/android/google-camera/ I recommend Arnova's version 6 since it is the latest and it is working ok (it is not bugless) .
5.Now when you done all this start the camera and as you can see it is not working That is because you need to set it up correctly.
So correct (most stable ) settings are :
Advanced : Config camera HDR+ / Pixel 2017 ZSL HDR+
HDR+ parameters (you can play with this and decide which ones are best for you. I use Medium or Very High.
Disable front HDR+ / ON - THIS IS MUST HAVE
HDR+ image quality / Again this is to your own liking I use 97%
Well, this is basically it. Everything else is up to you to experiment with and share your best stable results. This setting I use every day and so far I didn't have any crashes. Also, a thing I forgot to mention in shooting mode you will see HDR+ icon up on the screen if you press it there is HDR+ enhanced mode and I do not recommend this since it is not working correctly with flash and it tends to crash app. I don't recommend it but it doesn't mean you cant use it
Share your best settings and some interesting pics! We are here to help each other.
GCam wouldn't be possible without Arnova, B-S-G, ivanich, scrubber, skulshady, cstark27, miniuser123, UriKill, Tolyan009, Charles_I, azevedo. This is their work and if you want to donate go to GCam donate link and donate to them. I am just here to make a bit simpler. Test GCam and have a nice day
Ok so there was some development for our device thanks to all GCam developers and @WebDingo for asking them to help us out. The new attacked zip is magisk module and it contains cam2api and front camera HDR fix for Mi Note 3. I tested it with couple of GCam versions and it works well. Flash it thry TWRP and enable (it should be enable by default ) in magisk. Also i there is now Arnova version on which manual focus works. The version is Arnova v7 test10 opt5-5t you can download it from official download page of Gcam ports i provided up in the thread. As always test and report
As you all know Gcam is not working on miui 10 builds. For now, we know "fix for it " i tried it on xiaomi.eu 10 stable build and it is working.
1. Download build pro editor from google play
2. Open build prop editor click on three dots in right up corner press + New - Name : persist.camera.HAL3.enabled and in Value field enter number 1 and click save.
3. in prop editor go to search and type persist.camera find this line - persist.camera.dxo=1 and delete it. Restart the phone. Now boot to twrp and flash camera fix for gcam and boot again.
4. Install Gcam you think will be good ( I tied it with OP6-1.2.1-Gcam and Gcam 5.1.018 by SerJo87)
The problem was (we think) during the broken blobs of OIS so by disabling it gcam works.
All of this wouldn't be possible without @dianlujitao @uvera and all other devs on MN3 telegram group. Special thanks to @rayser ( I don't know how are you signed up here buddy).
Findings so far:
Front camera has screen flash (when will MIUI camera implement this?)
HDR+ enhanced works correctly with flash in my case (MIUI EU 9.2.2.0)
HDR+ doesn't work correctly with flash (the flash is already off when the picture is taken)
HDR+ enhanced has greenish issue
60fps recording records 30fps (more like library issue from the base ROM)
Portrait mode doesn't work for front camera (lens blur works, though)
Are you using same settings as i mentioned above? What version of GCam ?
Video mode is very dark.....
I did intall difrently, because i dont know how to use magisk....but the result is the same.:angel:
Edit:
Forget it, video works normally..
You dont need magisk for GCam as an app. You need magisk to enable camera2api (which you did by fleshing it via TWRP) so you can just install/uninstall GCams apks normally. Also you can have more than one GCam installed on your device. I have currently 3 of them. V3.2 + v5 + v6.
What i did was wright the 2 lines with app Build.ini.
Did follow your sugestions for Gcam. Im at work without time to test....
Queston:
Why there isnt option for 13Mb in 16:9 mode? Only 9Mb....
You mean 13 megapixel and 9 megapixel ? Because 16:9 is cropped image and it is in 9mpx resolution.
dimi89 said:
Are you using same settings as i mentioned above? What version of GCam ?
Click to expand...
Click to collapse
Yes, v6.
Hi!
I'm on Xiaomi.EU 8.2.1 Rom .
When i activate the Camera2Api, Google Camera works, but i can not record 4K video with it, and the default Miui camera app also refuses the video recording in 4K.
I've tried a lot of camera apps, with same result. 1080p ok, but the 4K not at all.
What is the solution?
Another question:
It is possible somehow to achive 1080p with 60fps?
maybe with a modded media profiles.xml?
Thanks!
Good Questions...
Gonna try 4K too
P.S. NO problem on 4K both cameras...didnt see the sound.
is this quide for fully working google camera? or just somethings of it? like touch to focus, no crashing, hdr+? no greenish etc..
As I wrote, this is guide to set up GCam there are different versions with different bugs, in v6 manual focus inst working and hdr+ enhances sometimes crash when using with auto flash. There is version 3.2 where manual focus is working but low light images aren't that good. Also there is v5 where in my opinion are the best details. So you download different versions and try to see which one you prefer.
Послато са Mi Note 3 уз помоћ Тапатока
I tried many versions of GCam and stock camera since 8.2.1. is improved a lot. It makes similar photos (with HDR) to GCam.
But for me, best quality of photos is GCam V1,7. But sometimes it do not want to make photo on HDR+, only with enchanced.
So wich version of gcam should i install if i use all in auto with hdr on?
I'm on lineage
Try GCam 5v1.2 arnova or v6 arnova. But keep in mind that it depends a lot on settings of GCam. For GCam 5v1.2 use Nexus 6P and Pixel 2017 ZSL +
Послато са Mi Note 3 уз помоћ Тапатока
I strongly recommend to try this one https://forum.xda-developers.com/showpost.php?p=75850874&postcount=43
Antretng said:
I strongly recommend to try this one https://forum.xda-developers.com/showpost.php?p=75850874&postcount=43
Click to expand...
Click to collapse
That's the first app + settings I've found with no bugs. Haven't deeply tested quality, but everything works.
Night shoots are black for me. It appears flash isnt helping. Same settings i used as in pictures.
Sent from my Mi Note 3 using Tapatalk
GCam is not working
GCam Arnova v6 is not working. It shows Black Screen only after configuring everything on Mi Note 3.
Is there 1080P 120fps slow-motion video capture available ?
Doesnt work on my note 3, i just get black screen. Version V6 and i'm using miui eu 8.3.8
---------- Post added at 09:15 PM ---------- Previous post was at 08:55 PM ----------
OK i fixed, just enabled "Disable front HDR+"
this is the miui port camera (ANX) I found it on the network and it works in pixel experience (plus) with android 10 (Q)
other models try you try (I try in mi9 only)
instructions:
1.Install ANX camera unity_175
2. install module 48MPfixQ_171
3.reboot and its all
I recommend installing one by one module
note:
the camera works by itself,
but you need the other module for portrait mode to work
MOD EDIT: DOWNLOAD LINK REMOVED
Thread closed
Mirrors of this camera are not allowed according to the original developer..
strongst
Forum Moderator