Hi all,
I have an issue with my D802 int LG G2.
I attempted to flash the 4.4 update from this thread via CMW recovery however part way through the install, the phone turned off and tried to restart.
As a result, the phone now only shows the LG logo and the LED changes colour constantly.
I cannot seem to get it to boot into a recovery mode, nor download mode..
Any ideas? I've had a search around but there doesn't seem to be too much help..
FYI, I can access the 'hard reset' menu by holding Vol - and power twice on boot, but that seems about it.
Looks like i've managed to resolve the problem - Get to the hard reset screen and opt to reset it to then go back to the custom recovery. Simply restoring my old backup worked.
hello
I Dont know what i have do to my g2
first of all
i tried to do factory reset to my g2 so
i called this number 3845#*802#
then i pressed
factory reset
then accept
then the phone is rebooted and is entering me to recovery mode ...
and every time is entering me to recovery mode
and dosnt allow me to enter my phone or anything
just recovery mode :crying::crying:
notice that my phone have root access
plz help
Hello
I have a big problem with an LG G2.
After trying to install factory image kdz, something screw up.
Actually, the phone is stuck on LG logo.
I can't enter download mode.
I can't enter recovery mode.
My PC doesn't even detect its.
I can only get the factory reset screen...
And the phone boot when I plug it.
I really need a solution, HELP :crying:
Thanks !
[Q] D802 hard bricked after wiping & flashing TWRP, no recovery, stuck in boot loop
TL;DR: Wanted to install CM12.1, wiped everything except Internal Storage from TWRP, flashed new version of TWRP (3.0.0-0), hard bricked my D802 (stuck in LG logo, can't get into recovery mode)
ISSUE: My LG G2 is stuck in a boot loop. Only the LG logo is displayed and when I try to turn off the phone by holding down the power button, it will blank out for a few seconds and then display the LG logo again. I tried accessing recovery mode via the hardware buttons and it takes me to the factory reset screen, and after I do press the power button twice it just takes me to a blank screen. I can get the phone into download mode, although my Windows machine doesn't recognize the phone even though its drivers are installed.
I am currently trying this guide. Although I'm not sure what KDZ/TOT to download for my phone :/
All the important files on my phone like photos and contacts are stored in the cloud so I can basically reset the phone to its factory state, if it comes to that.
If someone could help me with a guide or anything that can lead me into the right steps for fixing the phone, I would be really thankful.
Purrado said:
TL;DR: Wanted to install CM12.1, wiped everything except Internal Storage from TWRP, flashed new version of TWRP (3.0.0-0), hard bricked my D802 (stuck in LG logo, can't get into recovery mode)
ISSUE: My LG G2 is stuck in a boot loop. Only the LG logo is displayed and when I try to turn off the phone by holding down the power button, it will blank out for a few seconds and then display the LG logo again. I tried accessing recovery mode via the hardware buttons and it takes me to the factory reset screen, and after I do press the power button twice it just takes me to a blank screen. I can get the phone into download mode, although my Windows machine doesn't recognize the phone even though its drivers are installed.
I am currently trying this guide. Although I'm not sure what KDZ/TOT to download for my phone :/
All the important files on my phone like photos and contacts are stored in the cloud so I can basically reset the phone to its factory state, if it comes to that.
If someone could help me with a guide or anything that can lead me into the right steps for fixing the phone, I would be really thankful.
Click to expand...
Click to collapse
Then I don't think what just happened with me is a coincidence, hmmmmmm
Does't anybody have an idea for a solution other than using KDZ? something like flashing the bootstack or recovery through PC?
---------- Post added at 06:34 PM ---------- Previous post was at 05:40 PM ----------
HHHHHHHHHHHHHHHHEY
I just got something:
So after using this tool http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076
I got my phone to boot to recovery, I used Unbrick to get my phone working again, now the only thing left is to get phone to actually boot to ROM
Anybody got a solution? Should I just reflash the ROM?
Update 2: I re-flashed the ROM, wiped cache and fixed permissions, still waiting for it to boot, I don't know, I think you're better off just backing up the ROM, clean install and then restore apps using TB from the nandroid backup
Final update: yup, clean flash it is
I hope this has helped
Purrado said:
TL;DR: Wanted to install CM12.1, wiped everything except Internal Storage from TWRP, flashed new version of TWRP (3.0.0-0), hard bricked my D802 (stuck in LG logo, can't get into recovery mode)
ISSUE: My LG G2 is stuck in a boot loop. Only the LG logo is displayed and when I try to turn off the phone by holding down the power button, it will blank out for a few seconds and then display the LG logo again. I tried accessing recovery mode via the hardware buttons and it takes me to the factory reset screen, and after I do press the power button twice it just takes me to a blank screen. I can get the phone into download mode, although my Windows machine doesn't recognize the phone even though its drivers are installed.
I am currently trying this guide. Although I'm not sure what KDZ/TOT to download for my phone :/
All the important files on my phone like photos and contacts are stored in the cloud so I can basically reset the phone to its factory state, if it comes to that.
If someone could help me with a guide or anything that can lead me into the right steps for fixing the phone, I would be really thankful.
Click to expand...
Click to collapse
You are goinf good mate ! follow the guide.
Hi, I have problem with my Stylo 2 Verizon, I tried to update to the VS83512A update via the verizon software upgrade tool, and I leave the phone in the update proccess and I come back, and I see what its stuck in 25% in the lg verizon tool, and leave more time, and the program freezes, I discconect the phone and tried again and I can't, if I turn on the phone, the phone boot to download mode, and if I press the combination, Vol Down+Power, boot to the recovery menu, and if I choose, Wipe cache, factory data reset, USB debug mode, and safe mode, the phone every time boot to download mode, and if I flash via LGUP I have 2 error. First image I tried with the VS83512A.kdz and the second image I tried with the VS83520b (Nougat Update). And if I tried with the LG mobile Support Tool I choose the Recovery From update, and I have another error see the third picture. Please let me know if have any information.
same!
I am having the same exact problem as you! Any fix to this ?
I have the sale problem