Related
Hello everyone,
With the recent update of Google's security patches for November, most custom ROMs won't boot anymore when Xposed modules are installed.
This problem seems related to a whitlelist, which makes it impossible for Xposed to activate modules and results in a endless bootloop.
So at the moment, there are (only) two solutions:
Downgrade to an older build (recommended: before November)
Or just wait until @rovo89 found a solution and updated Xposed
But for everyone else who don't have time to wait, I have found a solution: Just replace libandroid_runtime.so with the one from former builds.
So I've made a flashable zip with lib files from a previous build which was working with Xposed fine (I've used cm-13.0-20161102-NIGHTLY-kenzo) for arm64 devices and it seems to work fine
Before flashing please make a backup of /system/lib/libandroid_runtime.so and /system/lib64/libandroid_runtime.so, I am not taking any responsibility for soft-bricked devices
Instructions:
Download flashable zip file
Reboot to recovery
Flash xposed-v86-bootloopfix-sdk23-arm64.zip
Reboot!
Now your phone should be able to boot back without getting a bootloop :fingers-crossed:
Thanks a lot for this solution to @aviraxp on GitHub!
Download: bit[dot]ly[slash]2g7DXoE
Yes, It saved my phone after flashing this new version of Xposed.
pudup said:
Here's a an xposed update that you can try and see if it fixes the problem.
http://dl-xda.xposed.info/framework/sdk23/arm64/xposed-v87-sdk23-arm64-test1.zip
Click to expand...
Click to collapse
pudup said:
Here's a an xposed update that you can try and see if it fixes the problem.
http://dl-xda.xposed.info/framework/sdk23/arm64/xposed-v87-sdk23-arm64-test1.zip
Click to expand...
Click to collapse
link not working plz proved correct magisk xposed framwork for redmi 3s prime
Hi all !
As I did not find a similar thread yet for the OnePlus 3T, I am starting one now.
I put some flashable zips together, which contain the modem and firmwares (NOT the complete rom, only other parts like bootloader etc.) of several OOS versions.
This allows you to change modems and firmware quickly and easily without flashing the full roms.
Why would you need this?
For instance if you are on OOS 4.0.3 and want to get rid of the nasty dm-verity message during every start.
Then you can flash this 4.0.2 firmware in recovery, boot into fastboot mode, enter the commands to get rid of dm-verity message ("fastboot oem disable_dm_verity", then "fastboot oem enable_dm_verity"), reboot straight back into recovery, flash 4.0.3 firmware again and bamm - done.
Installation
1. Download a Firmware+Modem package from below
2. Go into Recovery (TWRP recommended)
3. Flash the downloaded .zip file
4. Reboot
5. Enjoy
Notes
These packages are ONLY FOR THE ONEPLUS3 T, no other phone !!!
Under normal circumstances, you cannot flash this zips on a wrong device as the flash zip checks for the device and will fail if you are not on an OnePlus 3 T.
However, if you are unsure and have adb debug connection, try
Code:
adb shell grep Hardware /proc/cpuinfo
On a OnePlus3T, this gives you "Hardware : Qualcomm Technologies, Inc MSM8996pro" back.
Alternatively you can also check in a local terminal app by entering the following command:
Code:
grep Hardware /proc/cpuinfo
DO NOT flash this package on a OnePlus 3 !!!
All packages are assembled by me from original OOS stock roms only.
Disclaimer
As always - Flash on your own risk !!
Make sure you flash the correct version depending on your device!
I can and will not take any responsibility for bricked phones or lost data.
I will not give any support as the content of the packages come from OnePlus and not from me.
Downloads
OOS 5.0.2 - DOWNLOAD LINK
OOS 5.0.1 - DOWNLOAD LINK
OOS 5.0.0 - DOWNLOAD LINK
OOS 4.5.1 - DOWNLOAD LINK
OOS 4.5.0 - DOWNLOAD LINK
OOS 4.1.7 - DOWNLOAD LINK
OOS Open Beta 11 - DOWNLOAD LINK
OOS 4.1.6 - DOWNLOAD LINK
OOS 4.1.5 - DOWNLOAD LINK
OOS 4.1.3 - DOWNLOAD LINK
OOS 4.1.1 - DOWNLOAD LINK
OOS 4.1.0 - DOWNLOAD LINK
Open Beta 3 - DOWNLOAD LINK
OOS 4.0.3 - DOWNLOAD LINK
OOS 4.0.2 - DOWNLOAD LINK
OOS 3.5.4 - DOWNLOAD LINK
Hi @Lord Boeffla,
I have a question about dm-verity: does fastboot commands used while under 4.0.2 firmware have same result has flashing this zip (from @jcadduono) ?
If yes, why do we simply just flash this zip while under 4.0.3 firmware ?
casual_kikoo said:
Hi @Lord Boeffla,
I have a question about dm-verity: does fastboot commands used while under 4.0.2 firmware have same result has flashing this zip (from @jcadduono) ?
If yes, why do we simply just flash this zip while under 4.0.3 firmware ?
Click to expand...
Click to collapse
Good question. Without analyzing what the zip you refer to does exactly, I cannot answer that.
And I will probably not do that as I personally prefer to work with OnePlus original methods only (flashing their firmware, using official commands is my preferred choice).
So - I cannot say. Up to you how you remove dm-verity best for you.
Andi
Hey andi, there is a similar thread i think
https://forum.xda-developers.com/showthread.php?t=3468628
My bad sorry. This is for OP3
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Crazy_Oni said:
Hey andi, there is a similar thread i think
https://forum.xda-developers.com/showthread.php?t=3468628
My bad sorry. This is for OP3
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Click to expand...
Click to collapse
Exactly, it is for the OP3. And the firmwares are NOT the same.
Andi
Firmware/Modem of Open Beta 3 added, as this is required to install latest LineageOS version of 9th of March 2017.
Andi
Firmware of todays OOS 4.1.5 added.
Enjoy
Andi
Firmware of todays OOS 4.1.6 added.
Enjoy
Andi
Firmware of Open Beta 11 added, so latest LineageOS can be flashed again properly.
Andi
Firmware of yesterdays OOS 4.1.7 added.
Enjoy
Andi
Firmware of yesterdays OOS 4.5.0 added.
Enjoy
Andi
Firmware of yesterdays OOS 4.5.1 added.
Enjoy
Andi
Firmware of OOS 5.0.0 added.
Enjoy
Andi
Firmware of OOS 5.0.1 and OOS 5.0.2 added.
Enjoy
Andi
Does anubody have, or know, where I can get a flashable zip file of the EEA rom?
Found a file to flash with the Mi Flash Tool, but then the anti rollback kicks in and prevents the rom from being flashed.
Here it is: https://bigota.d.miui.com/V10.3.8.0...EAGlobal_V10.3.8.0.PFJEUXM_5820b982aa_9.0.zip
Schnedi said:
Here it is: https://bigota.d.miui.com/V10.3.8.0...EAGlobal_V10.3.8.0.PFJEUXM_5820b982aa_9.0.zip
Click to expand...
Click to collapse
Thank you!
I tried xiaomi.eu a short while but no widevine L1 (yet), couldn't enter battery optimisation, translation errors.
I guess xiaomi.eu rom is a bit too early for me atm.
Here https://mifirm.net/model/davinci.ttt#other-euf
or here https://xiaomifirmwareupdater.com/miui/
hello, I need betatesters for lineage 15.0 (Android 8.0) for T280, can someone test the rom for me?
Updated links!
And I tested this rom and its working!
EDIT2: I added patches in this rom to resolve error of /proc/sys/vm/mmap_rnd_bits.
Everything should work now.
Download links:
boot.img: Download boot.img
system.img: Download system.img
Install the boot.img file and system.img rebooting into twrp
If you can confirm it is not bricking device. Yes why not. This too suspicious. Where did you get this files?
@emirefek I compiled lineage os 15.0 from source.
@emirefek And if these files are bricking the device then I will recompile lineage 15.0 and repost the link updated ...
Cristian0808 said:
@emirefek And if these files are bricking the device then I will recompile lineage 15.0 and repost the link updated ...
Click to expand...
Click to collapse
If you are not sure it will brick or not. First you should try. We are also paid for this tablet. You test it first, than we can try.
@emirefek Ok.
@emirefek I didn't test this rom, but I added patches to the kernel. Test this rom for me and if you get a error please give me the logs. (give me the log of /proc/last_kmsg or the logcat if the device booted to system.)
I'm really willing to help but after I installed boot and system img it stucked at bootloader and keeped restarting.
But I can say that it doesn't hardbrick your device, just don't forget to make a backup
My system are looping reboot, solve this please!
Cristian0808 said:
hello, I need betatesters for lineage 15.0 (Android 8.0) for T280, can someone test the rom for me?
Updated links!
And I tested this rom and its working!
EDIT2: I added patches in this rom to resolve error of /proc/sys/vm/mmap_rnd_bits.
Everything should work now.
Download links:
boot.img: Download boot.img
system.img: Download system.img
Install the boot.img file and system.img rebooting into twrp
Click to expand...
Click to collapse
Can you build a rom for sm-t280 android 9 with treble support.. Zip file for flashing plss can you make it.. I don't have lap or computer.. Can you make it plsss..
Cristian0808 said:
hello, I need betatesters for lineage 15.0 (Android 8.0) for T280, can someone test the rom for me?
Updated links!
And I tested this rom and its working!
EDIT2: I added patches in this rom to resolve error of /proc/sys/vm/mmap_rnd_bits.
Everything should work now.
Download links:
boot.img: Download boot.img
system.img: Download system.img
Install the boot.img file and system.img rebooting into twrp
Click to expand...
Click to collapse
This rom won't brick the tablet??
If is the case can test it
apadron1304 said:
This rom won't brick the tablet??
If is the case can test it
Click to expand...
Click to collapse
Mmm
apadron1304 said:
This rom won't brick the tablet??
If is the case can test it
Click to expand...
Click to collapse
Before you flashing which rom was in you're tab... Mine was briked.. If anyone can create a flashable zip using this img files... Which twrp.. How did you flash it
I have lineageos 14.1
Mr. Cletus said:
Mmm
Before you flashing which rom was in you're tab... Mine was briked.. If anyone can create a flashable zip using this img files... Which twrp.. How did you flash it eos 14.1 in my smt280
Click to expand...
Click to collapse
Cristian0808 said:
hello, I need betatesters for lineage 15.0 (Android 8.0) for T280, can someone test the rom for me?
Updated links!
And I tested this rom and its working!
EDIT2: I added patches in this rom to resolve error of /proc/sys/vm/mmap_rnd_bits.
Everything should work now.
Download links:
boot.img: Download boot.img
system.img: Download system.img
Install the boot.img file and system.img rebooting into twrp
Click to expand...
Click to collapse
I texted this rom my tab was briked... .. And i tired to flash with odin the boot. Img works fine... While flashing system.img it says fail.... Maybe i think you have recompile it... Or the best way is to make flashable zip for twrp...
ROM doesnt boot, you could try making a flashable zip.
I am attempting to build resurection remix android oreo for this device
Edit: i gave up
Bonjour,
J'ai la même chose en flashant boot.img et system.img la tablette boucle ....
Quelle version de twrp faut il ?
Sinon est il possible de créer une version flashable en zip.
D'avance merci
Denis
Translated by GT:
Hello,
I have the same thing flashing boot.img and system.img the tablet loops ....
Which version of twrp do I need?
Otherwise it is possible to create a flashable zip version.
Thanks in advance
Denis
zippzYT said:
ROM doesnt boot, you could try making a flashable zip.
I am attempting to build resurection remix android oreo for this device
Edit: i gave up
Click to expand...
Click to collapse
What happened....?,
Try lineage os 16 or something
Links updated!
boot.img: https://drive.google.com/file/d/1OIo9JfrlzITBFpx9HmFTmnPdQEuqaXLl/view?usp=sharing
system.img: https://drive.google.com/file/d/1-JFJyE0EWfcn5pESjxL3n7ECYx1n1jI9/view?usp=sharing
This time I made progress with bringing up adb.
Report bugs and errors to me by posting here the content of /proc/last_kmsg, or logcat.
Does it work?
Also, I'm kinda new, so how do you use ADB?
Like, go in to TWRP?
Cristian0808 said:
Links updated!
boot.img: https://drive.google.com/file/d/1OIo9JfrlzITBFpx9HmFTmnPdQEuqaXLl/view?usp=sharing
system.img: https://drive.google.com/file/d/1-JFJyE0EWfcn5pESjxL3n7ECYx1n1jI9/view?usp=sharing
This time I made progress with bringing up adb.
Report bugs and errors to me by posting here the content of /proc/last_kmsg, or logcat.
Click to expand...
Click to collapse
It doesn't work
Has anyone been able to flash and have the latest magisk version work on shield? I've had no look thus far
bump
I use magisk delta 25.2, I think it is the latest version.
Did it by flashing modified boot.img available in 2019 section.