Database Users

[Q] Xoom files doesnt change

Hello guys,
i got a serious and frustrating problem here.
A few days ago my xoom was stuck on the M screen, so I used a thread in the forum and recovered it.
It solved myh problem back then, but since I had 3.2 before this and the solution injected me with Android 3.01 my problems started to show themselves.
the first one is that
<b> Through Fastboot, RecoveryMod, ADB </b> and any other way you can Imagine to install a new ROM or even remove or create a file,
All of them show success message but when I check them out I see no changes.
i tried fastboot and Recovery to install nearly every ROM,Recovery and bootimage in this site but so far it was wild goose chase.
so I want to ask if I'm doing anything wrong or if you need any more information here, but please help me with this

wow I cant believe it, All these masterminds here and no answer to my distress signal??
Guys I am so in trouble and this is the only place I hoped to get answered.
I can provide you with more info if you need, but please dont say I'm on my own here.
all these years this forum was the last hope for me.
i know I'll get my answer here one day

You are not being very clear about what you have done,, but I'm assuming that you reinstalled the stock image that got you back to HC 3.01. Can you see if you are able to get OTA updates to get you back to at least 3.1, or 3.2 if possible?

If that's my problem forgive me please, Ive written that post in 3:00AM
for the sake of clearity I should add some info:
1. I even tried stock ROMs but you see I cant even flash them (Not from Recovery nor Fastboot) the steps seem successful : it opens the package,it installs them and it says everything was a success. But when I restart the device I see nothing has changed.
2. OTA updates are the same, they keep downloading and when the sysem reboots to recovery to install them it cant find them.
3. You dont believe it if I say even files and programs that I remove from device by my hand(Android OS) are back after the first restart.
And you see it's dark magic! everything from a file to a partition are back by one reboot. I dont know what should I call it but I havent seen anything like it on the whole Internet.
So seems like I should make a competition for the xda experts here
Can you publish it so all of them can see it?

Mohfath said:
If that's my problem forgive me please, Ive written that post in 3:00AM
for the sake of clearity I should add some info:
1. I even tried stock ROMs but you see I cant even flash them (Not from Recovery nor Fastboot) the steps seem successful : it opens the package,it installs them and it says everything was a success. But when I restart the device I see nothing has changed.
2. OTA updates are the same, they keep downloading and when the sysem reboots to recovery to install them it cant find them.
3. You dont believe it if I say even files and programs that I remove from device by my hand(Android OS) are back after the first restart.
And you see it's dark magic! everything from a file to a partition are back by one reboot. I dont know what should I call it but I havent seen anything like it on the whole Internet.
So seems like I should make a competition for the xda experts here
Can you publish it so all of them can see it?
Click to expand...
Click to collapse
Actually, I have seen someone with the same problem here on this forum, but I can't recall exactly what the solution was.
Can you describe, step by step what you are doing, what cable you are connecting to your pc with, etc?

okantomi said:
Actually, I have seen someone with the same problem here on this forum, but I can't recall exactly what the solution was.
Can you describe, step by step what you are doing, what cable you are connecting to your pc with, etc?
Click to expand...
Click to collapse
That would be relief to know this could be solvable.
I will look more too.
As for your post I must say:
1. I plug the Xoom to the PC using the included cable
2. I start the xoom and start fastboot
3. on the PC system has the drivers and completely knows it
4. I start with SDK:
I. Fastboot oem unlock (Completing onscreen instructions and reboot device)
II. Fastboot mode again I use Fastboot flash boot boot.img
III. Continuing with Recovery,System
IV. Rebooting the device anything is the same.
My ROM is unchanged by the process and keeeeeeeeps giving the damn error of System process error please submit
5. And with ClockworkrecoveryMod I have the stock ROM on my sd card.
I. I choose install zip from sd card.
II.Choose the correct zip file and start flashing.
III. Choosing Wipe Data/Factory reset will take the device into a complete hang. unless I first use the mount page to mount the System/Data
IV. I reboot the device and ..... you know nothing changed.
so thats my story.
Still hope to find something about it.

Thanks...that was helpful. But now I want to know the following:
Were you rooted before the trouble started?
What did you do to recover?
If rooted, what version of CWM recovery did you have installed? Did you do a nanadroid backup? (I guess the answer is no, because you could have just restored with that).
What recovery are you accessing when trying to flash a zip file?
If you can answer these questions I will continue to wrack my brain trying to recall where I saw that thread.
Edit: please check out this thread http://forum.xda-developers.com/showthread.php?t=1370312
Some of what I said to him may help you .

okantomi said:
Were you rooted before the trouble started?
What did you do to recover?
If rooted, what version of CWM recovery did you have installed? Did you do a nanadroid backup? (I guess the answer is no, because you could have just restored with that).
What recovery are you accessing when trying to flash a zip file?
If you can answer these questions I will continue to wrack my brain trying to recall where I saw that thread.
Edit: please check out this thread http://forum.xda-developers.com/showthread.php?t=1370312
Some of what I said to him may help you .
Click to expand...
Click to collapse
Being rooted? -> Yes, The world is more beautiful with root!
to recover -> I followed this: http://forum.xda-developers.com/showthread.php?t=1097997 Shame it was Android 3.0
I use ClockworkRecovery 3.0.0.28 and I cant upgrade it cause of ... you know
And for your help I must say you are definitely the most caring person I know...
I'm off to check the provided link now

I was thinking of something that might be a reason.
I have this tiny problem:
When I go to CWM and choose Erase userData/Factory Reset Device Hangs
Click to expand...
Click to collapse
I was thinking of may be the userdata partition is corrupted and I gotta find a way to flash it completely.
Somehow I used Fastboot utility to do this and after saying Success, Nothing changed again.
Do you know any other way to physically do this job?

flash write failure

Dear guys,
due to problems within this morning, i restarted my phone to wipe dalvik/cache.
But it occured that TWRP somehowe needs to have a password (which i didn't ever set though).
Didn't boot up at all now. Even with toolkit no chance to do anything with the device.
Any further suggestions/ideas?

Try flashing the factory image without using a tool kit. Google nexus 4 factory image. Download it to your pc and extract it. Run the flash-all.bat you'll find in there.
Sent from my Nexus 5

r4ff0r said:
Dear guys,
due to problems within this morning, i restarted my phone to wipe dalvik/cache.
But it occured that TWRP somehowe needs to have a password (which i didn't ever set though).
Didn't boot up at all now. Even with toolkit no chance to do anything with the device.
Any further suggestions/ideas?
Click to expand...
Click to collapse
Some Partitions of the phone have got some bad blocks causing it to act in such a way !! Seems RMA(if available) is the best recourse since there is no definative solution to this problem !! You can try hard reboot as well as someone once pointed out that his n4 magically restored during it but others dint have that much of luck !! Also u could give LGNPST a try but since that also writes the partition it is highly unlikely to get you through !! One Solution I know will surely work is Qualcomm PST using the HighSpeed USB Device . But unfortunately we need an expert help, probably a Qualcomm employee to get in touch with since the tool has still not been cracked by anyone for n4 though I read somewhere that someone was able to restore using QPST !! Also mostly a JTAG Repair can help you but thats a rip off !! I'll anyday prefer a official LG/Google Repair over a JTAG !!
Hope you find my post useful !!

THanks Guys,
JD5, it didn't work.
Corresponding to Nabendu's post i guess it is the issue mentioned here.
http://forum.xda-developers.com/nexus-4/help/dead-nexus-4-strange-advice-welcome-t2259334
So therefore i don't see any chance :-/

r4ff0r said:
THanks Guys,
JD5, it didn't work.
Corresponding to Nabendu's post i guess it is the issue mentioned here.
http://forum.xda-developers.com/nexus-4/help/dead-nexus-4-strange-advice-welcome-t2259334
So therefore i don't see any chance :-/
Click to expand...
Click to collapse
I was afraid of that. Try one thing. Relock the bootloader, fastboot oem lock, then re-boot and see if the bootloader locks. If it doesn't, and it probably won't, then rma is your option.
Edit, haha, I just read that thread you posted and they tried the same thing
Sent from my Nexus 5

i was already trying that. at first it seems that the bootloader got locked again but right after restart it is already unlocked again.
I guess RMA will cause problems due to the fact that it was a rooted Nexus, using a custom rom.

r4ff0r said:
i was already trying that. at first it seems that the bootloader got locked again but right after restart it is already unlocked again.
I guess RMA will cause problems due to the fact that it was a rooted Nexus, using a custom rom.
Click to expand...
Click to collapse
Google seems to have been pretty good with rma's when it's a hardware failure. Pretty sure your emmc is borked. But you never know until you send it in. Hopefully there won't be a problem.
Sent from my Nexus 5

Ok I'll give it a try on monday. But as far as i know, i'll need to call them first.
I could imagine that they'll try to let me wipe my data or give me any kind of instructions to see if they can resolve the problem right away? What do i tell them?
At latest when they'll lead me to the recovery i'll get stuck using TWRP at latest.
Any kind of conversation dialogue i can follow up?

Let's try one more thing, inside the factory image is a zip file, extract that. In there is recovery.img. Put that file in the same folder as fastboot.exe. In fastboot try fastboot flash recovery recovery.img
If it works it'll put the stock recovery on.
Sent from my Nexus 5

Nope, same issue " flash write failure"
I can't get any kind o access...
But don't leave any more thoughts on it. Won't work though, i won't want to bother you all the time

jd1639 said:
Let's try one more thing, inside the factory image is a zip file, extract that. In there is recovery.img. Put that file in the same folder as fastboot.exe. In fastboot try fastboot flash recovery recovery.img
If it works it'll put the stock recovery on.
Sent from my Nexus 5
Click to expand...
Click to collapse
It won't let you flash that either to the best of my knowledge !! Just don't tell those operators that you have unlocked your bootloader and have a custom recovery !! Basically they won't tell u to go into stock recovery !! They'll just ask you hard reset the phone using physical keys !! Bdw check my pm !!

r4ff0r said:
Nope, same issue " flash write failure"
I can't get any kind o access...
But don't leave any more thoughts on it. Won't work though, i won't want to bother you all the time
Click to expand...
Click to collapse
Np, not sure what to tell them. It still boots I assume so you can't tell them it won't boot. I guess just the truth, it is a developer phone after all so it should be flashable
Sent from my Nexus 5

[Q] Bricked Nexus 4

Hello Guys,
yesterday I restarted my Nexus 4, running the cm-13.0-20160520-NIGHTLY-mako. It stuck at the bootlogo, so I tried to reflash it in the twrp 2.8.7.0 recovery. But I got the error message "E:/ unable to mount /cache".
After that I was trying to solve this issue by wiping the cache, but I got the same error message -> The phone wasn't booting
From now on I did several things to solve my problem. I don't know the exact order.
- I've downloaded the Nexus Root Toolkit from WugFresh -> Tried to use the Flash Stock + Unroot Option with Soft-Bricked/Bootloop status enabled -> I choosed the 5.1.1 Factory Image -> In the cmd window, I get in every point the same error message "Falied (remote: flash write failure) -> I get the same message when I'm trying to manually flash each part of the factory image via fastboot
- Within the Toolkit I also tried to format cache, system and Userdata, but afther this I get the same error when trying to do the step before
- I think also used the Fastboot Flash options, but I'm not sure.
- After that I attempted to flash the cm13.zip via adb-sideload in TWRP. Here is a part from the error message I get:
"(...) could not detect filesystem for /dev/block/platform/msm_sdcc.1/by-name/system, assuming ext4
mount: failed to mount /dev/block/platform/msm_sdcc.1/by-name/system at /system: Invalid argument
unmount of /system failed: no such volume (...)
E: Error executing updater binary in zip 'sideload/package.zip'
E: Unable to mount '/data'
- In TWRP the Internal Storage is shown with 0mb
- Currently only the bootloader is working fine and I also can get a fastboot and adb connection to the phone
-> Loading the recovery is only possible by booting a recovery image in fastboot
Can somebody tell me if it is possible to restore my Nexus 4 and how to do it?
Thank you in advance :fingers-crossed:
PS: I hope I mentioned all the important points. If some information is missing, feel free to ask me.

Did you try to manually flash the latest rom?
Did you try to flash a stock 4.2 rom?
Tried different USB cables and USB ports?

audit13 said:
Did you try to manually flash the latest rom?
Did you try to flash a stock 4.2 rom?
Tried different USB cables and USB ports?
Click to expand...
Click to collapse
Thank you for your answer.
I tried to flash the newest cm13 in TWRP and with adb Sideload. I get the same error.
Also the 4.2 Stock rom doesn't work. Same problem as with the 5.1.1 factory image.
I also switched the cable and the USB ports, but it leads to the same error messages.

Try flashing the userdata.img file in fastboot. As soon as userdata finishes flashing, use the buttons to boot into recovery and perform a factory wipe. User the usedata.img file included with the stock ROM you flashed.

From what I see, your partitions got completely messed up. I reckon if it's fixable at all (assuming your chip ain't dead), the only thing that can fix it is fully reflashing everything via emergency mode. Now I can't seem to find the exact link, but I do know there was a thread on xda with instructions and everything. I'll keep digging around to see if I can find anything and then I'll link it here.

audit13 said:
Try flashing the userdata.img file in fastboot. As soon as userdata finishes flashing, use the buttons to boot into recovery and perform a factory wipe. User the usedata.img file included with the stock ROM you flashed.
Click to expand...
Click to collapse
I get the same error message as always: Falied (remote: flash write failure)
nerotNS said:
From what I see, your partitions got completely messed up. I reckon if it's fixable at all (assuming your chip ain't dead), the only thing that can fix it is fully reflashing everything via emergency mode. Now I can't seem to find the exact link, but I do know there was a thread on xda with instructions and everything. I'll keep digging around to see if I can find anything and then I'll link it here.
Click to expand...
Click to collapse
In Meanwhile I also think that my partitions are messed up. I saw one thread that could help me (http://forum.xda-developers.com/nexus-4/general/tutorial-how-to-unbrick-n4-t2347060), but some of the links are down.
Thank you for your help. :good:

Does the bootloader remain unlocked after rebooting? The emmc chip could be messed up and need replacement.

audit13 said:
Does the bootloader remain unlocked after rebooting? The emmc chip could be messed up and need replacement.
Click to expand...
Click to collapse
Unfortunately yes. After locking the bootloader via fastboot, the bootloader is marked as unlocked after rebooting.
Do I have to change the mainboard?

This confirms that the emmc chip is damaged and can only be fixed via a motherboard swap.
I had similar problems with two nexus 5 phones where I would unlock the bootloader but would always relock on reboot.

audit13 said:
This confirms that the emmc chip is damaged and can only be fixed via a motherboard swap.
I had similar problems with two nexus 5 phones where I would unlock the bootloader but would always relock on reboot.
Click to expand...
Click to collapse
Ok. Doesn't sound very good.
Nevertheless I will try the method of nerotNS, if he finds the thread.

tobi.king said:
I get the same error message as always: Falied (remote: flash write failure)
In Meanwhile I also think that my partitions are messed up. I saw one thread that could help me (http://forum.xda-developers.com/nexus-4/general/tutorial-how-to-unbrick-n4-t2347060), but some of the links are down.
Thank you for your help. :good:
Click to expand...
Click to collapse
Aye that's the thread I've been talking about. And yeah, the links are down for quite a while, I reckon the OP doesn't maintain it anymore. Anyways I used the tool once, I found all the files by Googling for like 4 hours or so - the most difficult one being the .dll file and getting the program itself to run. I'd upload them to you but there were on my C disk on my main rig and that got wiped when I reinstalled Windows :S I'm sure the files are on the net even now tho, I remember getting the .dll file from some Chinese website, Chrome's translator gave me enough info to actually download the file. Once I got it up and running the flash was OK, I've tested the method from that thread myself, the only problem is getting the files from the links that are down. I wish you good luck in your search for them, I know what an awful feeling it is for your nexus to die, my mako is still my daily driver, still kickin' ass
tobi.king said:
Ok. Doesn't sound very good.
Nevertheless I will try the method of nerotNS, if he finds the thread.
Click to expand...
Click to collapse
I did however have to change the motherboard out, since, while the flash was ok, the chip was not, so it didn't help much. I had an issue with my /data partition where it was completely gone, and the while filesystem got messed up, the only thing I could boot to was bootloader and even that only while on charger. Eventually I swapped my motherboard with a friends who didn't need her nexus 4 anymore and now it's ok. I suggest you first attempt the method from that link and if that fails, then you should resort to getting a new motherboard, but imo only if you can get it either dirt cheap or in a way like I did. Caching out around 100$ for a new nexus 4 mb, with phones like nexus 5X 32Gb costing 300$ is not a good investment if you ask me.

nerotNS said:
Aye that's the thread I've been talking about. And yeah, the links are down for quite a while, I reckon the OP doesn't maintain it anymore. Anyways I used the tool once, I found all the files by Googling for like 4 hours or so - the most difficult one being the .dll file and getting the program itself to run. I'd upload them to you but there were on my C disk on my main rig and that got wiped when I reinstalled Windows :S I'm sure the files are on the net even now tho, I remember getting the .dll file from some Chinese website, Chrome's translator gave me enough info to actually download the file. Once I got it up and running the flash was OK, I've tested the method from that thread myself, the only problem is getting the files from the links that are down. I wish you good luck in your search for them, I know what an awful feeling it is for your nexus to die, my mako is still my daily driver, still kickin' ass
I did however have to change the motherboard out, since, while the flash was ok, the chip was not, so it didn't help much. I had an issue with my /data partition where it was completely gone, and the while filesystem got messed up, the only thing I could boot to was bootloader and even that only while on charger. Eventually I swapped my motherboard with a friends who didn't need her nexus 4 anymore and now it's ok. I suggest you first attempt the method from that link and if that fails, then you should resort to getting a new motherboard, but imo only if you can get it either dirt cheap or in a way like I did. Caching out around 100$ for a new nexus 4 mb, with phones like nexus 5X 32Gb costing 300$ is not a good investment if you ask me.
Click to expand...
Click to collapse
I found all the necessary files for doing the method subscribed in the thread, but afther flashing the firmware nothing changed. Only thing that worked was the bootloader, everthing else still wasn't working.
Fortunately I had a broken Nexus 4 from a friend. So I switched both mainboards and my Phone is working again
Thank you for your help.

tobi.king said:
I found all the necessary files for doing the method subscribed in the thread, but afther flashing the firmware nothing changed. Only thing that worked was the bootloader, everthing else still wasn't working.
Fortunately I had a broken Nexus 4 from a friend. So I switched both mainboards and my Phone is working again
Thank you for your help.
Click to expand...
Click to collapse
Awesome, glad to be of service

Wifi/bluetooth keep trying to turn on but fail everytime.

When I try to enable wifi (or bluetooth), it says 'Turning on...' underneath the icon but the process never succeeds.
Note:
-Under About > Status I see no MAC address for Wifi or Bluetooth.
-Phone is not rooted.
-Bootloader is unlocked.
-No custom recovery.
-Airplane mode is off.
-I am able to access the internet when I put in my SIM card and use my cellular data.
-EDIT: Model is listed as IN2025. The Build number is Oxygen OS 11.0.2.2.IN11AA.
-EDIT: I keep my SIM out of this phone (it's in my fully working phone). Can insert if need be.
My attempts to solve this issue (none have worked):
-I updated to OxygenOS 11.
-I booted into recovery and wiped everything, including cache. I also did a System Reset.
-I went to Settings > System > Reset Wifi, mobile and Bluetooth. I also did Erase all data (factory reset) in the same place.
Is there anything else left to try? Is there a way to flash the modem image maybe, I remember having to do that with my Nexus 4 many years ago.
Thanks!

A factory reset never finds the root cause. A virus or an old load are the only reasons to use it otherwise find the root cause. Usually a bad setting. If it's software caused the solution is right in front of you.
Network reset, worth a shot.
Clear system cache, can't hurt.
Clear data in sim card tool kit apk.
Both are probably redundant since you already did a hard reset, but try anyway.
Otherwise...
Bad sim card (try reseating it or replace otherwise) , corrupted firmware, or defective hardware.

Which phone do you have? I've seen this when a user has had a Chinese version and converted to global then when they updated to 11 it all went wrong.
If you're not using a converted Chinese phone then it could very well be your boot image. Extract it using payload then flash it.
If not that then MSM restore your current firmware.

dladz said:
Which phone do you have? I've seen this when a user has had a Chinese version and converted to global then when they updated to 11 it all went wrong.
If you're not using a converted Chinese phone then it could very well be your boot image. Extract it using payload then flash it.
If not that then MSM restore your current firmware.
Click to expand...
Click to collapse
Sorry, what is **MSM** restore?
Under About phone the Model is listed as IN2025. The Build number is Oxygen OS 11.0.2.2.IN11AA.
So I extracted all the images(?) using payload and very foolishly decided to
Code:
fastboot flash modem modem.img
The phone doesn't boot up anymore/remains stuck in loading phase (spinner...). I did a
Code:
fastboot flash boot boot.img
+ wipe + factory reset but still stuck in loading phase.
Any ideas as to how I can fix my mistake?
I appreciate all your help guys.

bassamanator said:
Sorry, what is **MSM** restore?
Under About phone the Model is listed as IN2025. The Build number is Oxygen OS 11.0.2.2.IN11AA.
So I extracted all the images(?) using payload and very foolishly decided to
Code:
fastboot flash modem modem.img
The phone doesn't boot up anymore/remains stuck in loading phase (spinner...). I did a
Code:
fastboot flash boot boot.img
+ wipe + factory reset but still stuck in loading phase.
Any ideas as to how I can fix my mistake?
I appreciate all your help guys.
Click to expand...
Click to collapse
Ah yea that's not good. 2025 AFAIK is global mainly sold in the US.
The MSM tool is in discussion I believe and it's a tool you use to restore your phone using EDL mode, to get to EDL.
Power off your phone.
Connect it to your computer (if it turns on again turn it back off)
Then open up the MSM tool and press and hold volume up and down
Your computer will recognise the the device and at this point you should start the process as it will try again to reboot shortly after without any input from you.
This is the thread you need.
[OP8PRO][OOS 11AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
Bare in mind this will relock your bootloader but it's easy to get that back unlocked.
Any questions regarding the tool just ask in the thread.
(you shouldn't need to providing you download the right one)
Download the latest firmware within the tool. If you get stuck don't just guess, ask someone.

@dladz
So I've managed to unbrick the phone using that tool. Thanks.
I'm going to install the latest oxygenos again, extract the boot.img from that zip, and flash it again as per your recommendation.

So I flashed OnePlus8ProOxygen_15.O.32_OTA_0320. No wifi. I extracted the boot.img and then flashed it via fastboot. Still no wifi.
Anything else that I can try?
I guess this is a hardware problem?

bassamanator said:
So I flashed OnePlus8ProOxygen_15.O.32_OTA_0320. No wifi. I extracted the boot.img and then flashed it via fastboot. Still no wifi.
Anything else that I can try?
I guess this is a hardware problem?
Click to expand...
Click to collapse
But now you have bt?

blackhawk said:
But now you have bt?
Click to expand...
Click to collapse
No bluetooth either. Same exact issue as with the Wifi, it says Turning on... then it doesn't.

bassamanator said:
No bluetooth either. Same exact issue as with the Wifi, it says Turning on... then it doesn't.
Click to expand...
Click to collapse
How/when did it start? Anything happen to the phone?

bassamanator said:
@dladz
So I've managed to unbrick the phone using that tool. Thanks.
I'm going to install the latest oxygenos again, extract the boot.img from that zip, and flash it again as per your recommendation.
Click to expand...
Click to collapse
So if you've used that tool then it'll have relocked your bootloader.
Did you unlock it again? AFAIK you can't flash another boot image unless you unlock it again.
The only other thing i can recommend (if you really don't want to RMA)
Would be to downgrade to 10 but in all fairness that really shouldn't even be an option at this point, you've flashed a clean OS back as oxygen would have, you've updated via the official OTA route.
No I think it's time to contact OnePlus for an RMA.
Unless someone else had seen this issue personally I haven't.
Had you rooted in the past btw? Flashed many magisk modules??
I find it highly unlikely that they could survive this but you could potentially try the magisk removal command, can never remember it it's in my payload dumper guide.
If no one else chimes in I'd say it's an RMA, I've not seen it before, it's strange.
Also (and please don't put it on here) but is your IMEI missing too?
This could be your EFS partition if so.
Edit: found this super old thread for the OnePlus one, same issue.
I think this is fixable, potentially remotely from OnePlus and or anyone else who has access to the updated tool, might be worth mentioning in the MSM thread if you haven't already.
PS: don't follow the guide in the link btw it's for the 1+1 lol, in just putting it here as a reference
OnePlus Community
Introducing our new OnePlus Community experience, with a completely revamped structure, built from the ground-up.
forums.oneplus.com

blackhawk said:
How/when did it start? Anything happen to the phone?
Click to expand...
Click to collapse
I got the phone used right before Christmas. It still had the protective plastic on it until I removed it today. It really is in mint condition (or looks to be). I've been away and finally got around to moving things over from my old oneplus 3T.
It's certainly possible that I bought a lemon but at this point I'd like to just fix it if I can.

bassamanator said:
I got the phone used right before Christmas. It still had the protective plastic on it until I removed it today. It really is in mint condition (or looks to be). I've been away and finally got around to moving things over from my old oneplus 3T.
It's certainly possible that I bought a lemon but at this point I'd like to just fix it if I can.
Click to expand...
Click to collapse
I think it's fixable now I really do
From what I've been reading I think it's a mixture of partitions that have been borked z namely the EFS and potentially the persist.img partition if the same position structure exists that did back in the day.
With that in mind are you able to use your fingerprint? I only ask as persist is linked to it so if that's not working then we may have a correlation between problems.
If it is then it's a ? Over the theory.
I'll keep reading but from what I can gather it seems that EFS and persist at least were linked, can't be sure if they are this point.
Have a look at that link I sent see if anything raises a flag for you, bare in mind it's for an older device

dladz said:
So if you've used that tool then it'll have relocked your bootloader.
Did you unlock it again? AFAIK you can't flash another boot image unless you unlock it again.
The only other thing i can recommend (if you really don't want to RMA)
Would be to downgrade to 10 but in all fairness that really shouldn't even be an option at this point, you've flashed a clean OS back as oxygen would have, you've updated via the official OTA route.
No I think it's time to contact OnePlus for an RMA.
Unless someone else had seen this issue personally I haven't.
Had you rooted in the past btw? Flashed many magisk modules??
I find it highly unlikely that they could survive this but you could potentially try the magisk removal command, can never remember it it's in my payload dumper guide.
If no one else chimes in I'd say it's an RMA, I've not seen it before, it's strange.
Also (and please don't put it on here) but is your IMEI missing too?
This could be your EFS partition if so.
Edit: found this super old thread for the OnePlus one, same issue.
I think this is fixable, potentially remotely from OnePlus and or anyone else who has access to the updated tool, might be worth mentioning in the MSM thread if you haven't already.
PS: don't follow the guide in the link btw it's for the 1+1 lol, in just putting it here as a reference
OnePlus Community
Introducing our new OnePlus Community experience, with a completely revamped structure, built from the ground-up.
forums.oneplus.com
Click to expand...
Click to collapse
Yes I had to oem unlock again.
As far as I know the phone was not rooted but it's a used phone. Superficially it's in mint condition, I just removed the plastic film just earlier. I'll post in the MSM thread and checkout the new one you posted.
EDIT: the phone has 2 IMEI numbers.

bassamanator said:
Yes I had to oem unlock again.
As far as I know the phone was not rooted but it's a used phone. Superficially it's in mint condition, I just removed the plastic film just earlier. I'll post in the MSM thread and checkout the new one you posted.
Click to expand...
Click to collapse
I've already posted in the MSM thread for you.
What about your fingerprint? Is that still working?

dladz said:
I think it's fixable now I really do
From what I've been reading I think it's a mixture of partitions that have been borked z namely the EFS and potentially the persist.img partition if the same position structure exists that did back in the day.
With that in mind are you able to use your fingerprint? I only ask as persist is linked to it so if that's not working then we may have a correlation between problems.
If it is then it's a ? Over the theory.
I'll keep reading but from what I can gather it seems that EFS and persist at least were linked, can't be sure if they are this point.
Have a look at that link I sent see if anything raises a flag for you, bare in mind it's for an older device
Click to expand...
Click to collapse
So I've never registered my fingerprint on a smartphone, ever, but I thought I would register one of my toes just to figure this thing out. When I get to the Fingerprint Setup screen I get the following error: Enrollment was not completed. Fingerprint registration error, please try again.
Does this help narrow down the issue?

bassamanator said:
So I've never registered my fingerprint on a smartphone, ever, but I thought I would register one of my toes just to figure this thing out. When I get to the Fingerprint Setup screen I get the following error: Enrollment was not completed. Fingerprint registration error, please try again.
Does this help narrow down the issue?
Click to expand...
Click to collapse
Yea for me it does, it shows there's a correlation between the persist problem and the EFS problem and a direct connection to your IMEI or Mac address issue.
With this in mind I would recommend the persist.img fix thread..
Getting that working may be key to solving the Mac / IMEI problem.
At this point nothing is going to hurt.

Here is the thread you'll need.
[GUIDE] Fix PERSIST.IMG Loss Of Finger Print Sensor
New video guide below VIDEO GUIDE 1. *VERY IMPORTANT* We need to back up your broken persist.img and store it in a safe place. PC preferred. We will need this later. Do not leave the backup on the device as the next step will wipe the device...
forum.xda-developers.com
Now I have not been through this but again it can't hurt at this point.

dladz said:
Here is the thread you'll need.
[GUIDE] Fix PERSIST.IMG Loss Of Finger Print Sensor
New video guide below VIDEO GUIDE 1. *VERY IMPORTANT* We need to back up your broken persist.img and store it in a safe place. PC preferred. We will need this later. Do not leave the backup on the device as the next step will wipe the device...
forum.xda-developers.com
Now I have not been through this but again it can't hurt at this point.
Click to expand...
Click to collapse
I was about to say, I want to try something along the lines of
fastboot erase modemst1
fastboot erase modemst2
fastboot erase persist
Click to expand...
Click to collapse
or something along those lines from this post https://forums.oneplus.com/threads/no-imei-and-no-efs-backup.322534/page-4#post-14545355 on that old oneplus forum thread you posted.
I'll try the new link you posted instead though.
IMEI is fine btw, the phone dials and connects just fine to cellular.

bassamanator said:
I was about to say, I want to try something along the lines of or something along those lines from this post https://forums.oneplus.com/threads/no-imei-and-no-efs-backup.322534/page-4#post-14545355 on that old oneplus forum thread you posted.
I'll try the new link you posted instead though.
IMEI is fine btw, the phone dials and connects just fine to cellular.
Click to expand...
Click to collapse
Ok don't do the EFS fix you do not have an EFS back up.
Give this a shot
go to data/misc/wifi (required root)
-backup file wpa_supplicant.conf in this folder which contains usename and password wifi
- delete all file in this folder
- turn on wifi ( if you careful, you can reboot )
- now you can connect to wifi
- recovery file wpa_supplicant.conf
This isn't my writing. The English is a little broken but you get the point

(HELP NEEDED) Onn 8" gen 2, 100011885 no boot

So I didn't happen to back up my scatter or boot.img files when I used fastboot to try and flash the TWRP for the onn 10 inch, I was assuming it would work, but now I'm stuck with no recovery, no fastboot, no system, won't boot up when you hold the power button.
The only method of recovery I have is through MTK preloader and spflash, but I don't have the correct factory images or scatter file required to reflash stock. I've been looking everywhere online and can't find the right recovery files or any guides on how to recover from this.
Any help/files/advice would be greatly appreciated!!

Two things, I got access to my old account after a password reset
and, I got my tab back up and running, as well as root & xposed + gravitybox
I'm working on a guide as we speak.

Also, I will be dumping my firmware and adding the 10001885 to the list of stock image dumps on the main onn thread.

Hope this helps if still needing it, scatter file for the 100011885 mt8168 , good luck not responsible for anything lol i still cant get mine to work, anklosburner
Ankylo'sburner said:
So I didn't happen to back up my scatter or boot.img files when I used fastboot to try and flash the TWRP for the onn 10 inch, I was assuming it would work, but now I'm stuck with no recovery, no fastboot, no system, won't boot up when you hold the power button.
The only method of recovery I have is through MTK preloader and spflash, but I don't have the correct factory images or scatter file required to reflash stock. I've been looking everywhere online and can't find the right recovery files or any guides on how to recover from this.
Any help/files/advice would be greatly appreciated!!
Click to expand...
Click to collapse
hope this helps if you still need it for 100011885 mt8168 scatter file, but not responsible for any damages, because i still cant get mine to work, i had it to where it would come on, or i could see back light but thats it, which im impatient too, maybe it takes a min, but i did a readback on every downloadable item and flashed it but idk, let me know if you or how you get yours to work if you do

bbcdt22 said:
Hope this helps if still needing it, scatter file for the 100011885 mt8168 , good luck not responsible for anything lol i still cant get mine to work, anklosburner
hope this helps if you still need it for 100011885 mt8168 scatter file, but not responsible for any damages, because i still cant get mine to work, i had it to where it would come on, or i could see back light but thats it, which im impatient too, maybe it takes a min, but i did a readback on every downloadable item and flashed it but idk, let me know if you or how you get yours to work if you do
Click to expand...
Click to collapse

Hey, i've had that same issue but have since fixed it by flashing the rom to the 100011886. I used some of the posts here to flash both vbmeta.img and boot.img to gain root, with success https://drive.google.com/drive/folders/17LtLtjKg4JJU9EJdIXPsyNjen0H-ilMX?usp=sharing . i eventually went too far and currupted my rom and had a hard time finding the stock ROM. I found the stock ROM to the 100011886 and flashed that to fix the problem, now i run that as my system and it boots up just fine. https://www.mediafire.com/file/107jp6gwbiwq87q/MT8168_ONN_Gen2_100011886.zip/file
fastboot erase super
fastboot flash super super.img

Would you happen to have the preloader bin file for the MT8168? After digging around, you have helped me get closer to bringing my hard brick back to life.
Edit: @bbcdt22

onn. said:
Would you happen to have the preloader bin file for the MT8168? After digging around, you have helped me get closer to bringing my hard brick back to life.
Edit: @bbcdt22
Click to expand...
Click to collapse
I don't, but this thread may help:
[STOCK] Stock Backups/Images/OTAs
Since these tablets don't have an external online resource for downloading system updates, only a sketchy OTA app (com.adups.fota) I'm collecting a library of OTAs, as well as boot/recovery/system images. I have access to a 10.1 with keyboard...
forum.xda-developers.com
Any rom you come across has to be extracted in order to get any necessary files from it. The thread mentions using 7zip but I've personally had better results extracting using ZArchiver. Also, a workaround I've found very useful when dealing with extraction issues, is removing the extension from the file. If all else fails, you may need to erase the super partition and reflash THAT

KMerrimanJr said:
I don't, but this thread may help:
[STOCK] Stock Backups/Images/OTAs
Since these tablets don't have an external online resource for downloading system updates, only a sketchy OTA app (com.adups.fota) I'm collecting a library of OTAs, as well as boot/recovery/system images. I have access to a 10.1 with keyboard...
forum.xda-developers.com
Any rom you come across has to be extracted in order to get any necessary files from it. The thread mentions using 7zip but I've personally had better results extracting using ZArchiver. Also, a workaround I've found very useful when dealing with extraction issues, is removing the extension from the file. If all else fails, you may need to erase the super partition and reflash THAT
Click to expand...
Click to collapse
Thanks for the response. I'm at the end of that thread currently trying to see what I can find to fix my issue. Aside from buying another one from Walmart and trying to see if I can pull everything from a vanilla tablet, I'm not sure if I'll ever find the exact files.

onn. said:
Thanks for the response. I'm at the end of that thread currently trying to see what I can find to fix my issue. Aside from buying another one from Walmart and trying to see if I can pull everything from a vanilla tablet, I'm not sure if I'll ever find the exact files.
Click to expand...
Click to collapse
onn. said:
Thanks for the response. I'm at the end of that thread currently trying to see what I can find to fix my issue. Aside from buying another one from Walmart and trying to see if I can pull everything from a vanilla tablet, I'm not sure if I'll ever find the exact files.
Click to expand...
Click to collapse
When my tab crashed on me, flashing the super image solved my issue but it was a different rom. My tab's model number ended in 885 but the super file I flashed came from an 886, it still worked though

KMerrimanJr said:
When my tab crashed on me, flashing the super image solved my issue but it was a different rom. My tab's model number ended in 885 but the super file I flashed came from an 886, it still worked though
Click to expand...
Click to collapse
I wish I would have waited until I read this today instead of further messing with it yesterday. It looks like everything you have is what I need, but now I am battling trying to get the COM port to stay active when the device is plugged in. I'll tinker with it and see if I can get back to the state I had it in yesterday where it was staying connected.

KMerrimanJr said:
When my tab crashed on me, flashing the super image solved my issue but it was a different rom. My tab's model number ended in 885 but the super file I flashed came from an 886, it still worked though
Click to expand...
Click to collapse
Would you happen to know/remember all the settings you checked in SP Flash Tool (I assume you used that) when you flashed things to get it working? It seems that my PC is able to communicate with the device again, but I'm unsure of how to proceed next.

Have you installed all of the adb & mtk drivers? If so, you should be able to use adb to reboot into the boot loader then use fast boot to flash the super file

KMerrimanJr said:
Have you installed all of the adb & mtk drivers? If so, you should be able to use adb to reboot into the boot loader then use fast boot to flash the super file
Click to expand...
Click to collapse
It's hard bricked at the moment unfortunately, so there's no appearance of life to it. Attached picture is the error I get. https://www.gizmoadvices.com/list-sp-flash-tool-error-codes-solution-fix/ appears show info about the error, but it's not something I know how to fix yet.
The only way I can get the tablet to make moves in device manager (which I assume is a sign that the PC can at least partially recognize/see the device) is to click on Download in SPFT, connect tablet to PC via USB cord, and then hold down power button, which led to the error. Errors in SPFT I've received so far are 0xC0060001 and 0xC0060003.
When the tablet is active in the device manager, I assume that the device is in a powered state. However, when the device is grayed out, I assume it's in a powered off state (see other pic). I've yet to find away to actually flash anything to it.

KMerrimanJr said:
Have you installed all of the adb & mtk drivers? If so, you should be able to use adb to reboot into the boot loader then use fast boot to flash the super file
Click to expand...
Click to collapse
Also, apologies if I'm being a bother, but do you know what version of SPFT you used as well as which DA file?

bbcdt22 said:
Hope this helps if still needing it, scatter file for the 100011885 mt8168 , good luck not responsible for anything lol i still cant get mine to work, anklosburner
hope this helps if you still need it for 100011885 mt8168 scatter file, but not responsible for any damages, because i still cant get mine to work, i had it to where it would come on, or i could see back light but thats it, which im impatient too, maybe it takes a min, but i did a readback on every downloadable item and flashed it but idk, let me know if you or how you get yours to work if you do
Click to expand...
Click to collapse
where did you get this? did you dump it? if so how?