Hello i recently got a zte blade from my provider (tmn in portugal) here they call it a5 i already installed two diferent froyo roms but i lose the camera and everytime the device goes to sleep thouchscreen just stops responding, i'm guessing its a drivers issue, is there any way to add my stock rom camera and thouchscreen drivers to a froyo custom rom ?
Thx in advance
no, it is kernel based. wait for the Japanese froyo dump.
another reminder, wrong thread. please keep to forum rules
can't he just use the stock kernel instead of the one from the custom rom?
Hello,
I have actually a samsung galaxy s i9000 device, running on CM 10.1
After a reboot, the screen turns pink.
Ive flashed and changed roms, formatted, cleaned partitions, did just about anything and it only works with stock rom and no with custom roms
I think there is no problem with the LCD at all
Thank you for your feedbacks / your help !
[Q&A] [KERNEL][20-Feb] ThunderZap 2.0 | Custom Gestures | Charger Control | Much Mor
Q&A for [KERNEL][20-Feb] ThunderZap 2.0 | Custom Gestures | Charger Control | Much More
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL][20-Feb] ThunderZap 2.0 | Custom Gestures | Charger Control | Much More. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Will it work on crdroid rom?
Will this kernel work on Crdroid rom?
Does this kernel work on tmo Samsung Galaxy Note 4 running cm12?
I have my Yu Yureka flashed with UNOFFICIAL CyanogenMod ROM CM-11.0 (by dumtara).
Can I use ThunderZap Kernel for the YU Yureka with this ROM?
Settings Reset
Everytime i restart my phone settings of app reset and disable special feature..
This kernel should work on all custom roms currently we have based on cm sources. SO it should work on CRdroid rom. i have personally tested and its working fine.
And about the settings getting reset aftr reboot. Its happening to me also. Havent found a solution yet.
But instead of this You can use Set-cpu app which has an option to retain settings (governor, scheduler, clock frequencies) even aftr reboot.
How to download it ? Download link redirects to its app .
I am a newbie to all this help :/
Will It Void Warranty Will I get OTA updates from cyanogen after flashing It?? and if it gives OTA update support should I reflash it after update again??
according to you which is better philztouch or CWM or TWRP and which one should i use to flash this??
for updating it to a newer version of the kernel should i reflash the stock kernel and flash the new version???
How to reduce charge time ?
Control: 95% of the features can be controlled with my app to work with this kernel,
you talked about post #3. Where is this post 3? How can I control other features of this kernel?
Phone overheats after flashing this kernel!
I've been using the stock kernel with no problem of heating whatsover (except when on charging and playing some HD games
simulataneously).
Flashed this kernel and received a call of about 2-3 mins. The phone was burning in my hand and the temperatures sky-rocketed to 65 C.
Rebooted the phone a couple of times with no change. Have used the kernel for almost a week now and now switching back to stock one for now.
From where do I enable ThunderPlug, and edit the Number of active cores etc.? Please reply, I see no such options. Also, what is the best and the safest current value to charge the battery real quick without harming anything.?
Sent from my Yu Yureka (AO5510), from the XDA Android App.
hey varun i just want to know is this kernel compatible with lollipop 64 bit
waiting for your kernel for 5.1..
i hav been using thunderzap 3.0 on my yureka.. now i upgraded to lollipop.. waitingto flash ur kernel,
Resurrection Remix android 5.1.1
Can this Kernel be used with Resurrection Remix android 5.1.1 (yu yureka), because I've tried so many ROMs nothing worked except for sandy's kernel. Plz help
Blue screen, bootloop
I am in CM12.1 stock. After flashing I get the bootscreen and then a blue screen and it loops. I don't know how to go back to stock kernel.
When I connect my phone to pc via usb, it shows the Yu screen and then shows a blue screen and boot loops. I can't go to fast boot or recovery. Is there a way to fix this ?
can't flash thunderzap kernel on you yureka running on cm 12.1
Hi,I have tried many times to flash the thunderzap kernel.but whenever I flash it and
Reboot my device, I always see a blue screen and then my device
Goes into a bootloop.I have cwm recovery installed.
stuck at blue screen
i flashed cm12.1 and now after the thunderzap flash bluescreen bootloop is shown please help ....
---------- Post added at 10:26 PM ---------- Previous post was at 10:17 PM ----------
vinay1010 said:
Hi,I have tried many times to flash the thunderzap kernel.but whenever I flash it and
Reboot my device, I always see a blue screen and then my device
Goes into a bootloop.I have cwm recovery installed.
Click to expand...
Click to collapse
how did you flash or boot into recovery after the thunderzap flash as soon as the thunderzap is flashed a bluescreen a bootloop starts
Can I use this kernel on stock cm11????? As I need fast charge option+ good battery life :thumbup:
Sent from my AO5510
For those who have their phones go into bootloop because of flashing this kernel
if your phone shows a blue screen at startup and then bootloops,
you can boot and nto fastboot and flash recovery by this method(it worked for me)
1)remove the battery of your yu yureka
2)plug it into a pc(with the battery already removed)
3)hold the up volume button with the battery already removed(i know its daifficult to do with the cover off but its doable)
4)now insert the battery into your phone(holding the up volume button and your phone should be plugged into th pc)
your phone should now go into fastboot mode
hit thanks if this helped
queries are welcome
---------- Post added at 08:38 AM ---------- Previous post was at 08:31 AM ----------
hi, this kernel is a 32 bit kernel and most of the roms of yu yureka are 64 bit ones
which is why yu yureka goes into a bootloop after flashing this kernel....
i have tried many kernels and till date only sandy kernel has worked for me
as it is a 64 bit kernel....
hit thanks if this helped
Hello everyone,
for some time I'm having problems with the touchscreen of my zuk z1, as you can see from the image Screenshot of my display , can someone help me to understand how to solve the problem?
moreover now there are also slowdowns of the touchscreen, I've already tried with app type: touchscreen calibrator, touchscreen repair, etc, but until now nothing has worked.
my zuk has cyanogen OS rom
version: 12.1-YOG4PAS9IG
android version 5.1.1
build number: LMY49J
I have an replaced lcd on j7 2017 and running android oreo. I'm not sure if the touch will work if I install a rom. I just need your feedback if somebody already tried flashing a custom rom on an replaced lcd screen. to be sure I'll be making a backup before I install a rom.