Database Users

Post Your Current or Last Boot Issues here (READ BEFORE POSTING PLEASE)

Hi A7 users,
Let's start this off be saying, bare with me English is not my primary language.....
OK now, the reason for this Thread is to find a definite solution for current users and future users who have run into boot issues cuz they were trying to :
A- Go back to Un-rooted and lock bootloader state.
B- Started Playing with root tools and make a huge mistake
C- Started playing with twrp not knowing what they were doing
D- All the above + started flashing images files and got worts.
E- Any other type of situation.
I Know we make mistakes and we learn from them and well here today we are going to try or rather say Find a permanent /define solution to all this issues with your help, so PLEASE ONLY POST IF YOU HAVE RUN INTO ANY OF THIS ISSUES AND HOW YOU GOT INTO THE ENCHILADA ( MESS ) .
If you have the solution to your previous boot problems send me a PM and I'll keep this Thread updated for everyone to see with your solution and of course credit to the user/s.​
NOTE : Please mention which Axon 7 you are using e.g. :
- A2017 (Chinese Variant)
- A2017U (USA Variant)
-A2017G (UK/Europe/International Variant)

reserve 1

reserve 2

reserve 3

reserve solution 4

reserve solution 5

Anyone this issues please post you issue, how to got into the problem, device model and if you got it fix let us know.

https://www.youtube.com/shared?ci=05LD4Ja-h3k
You'd think with all the other posts about problems there'd be something here by now.
Always thank those who are helpful...and just ignore those who aren't.

Mine happened when I wiped Internal storage from twrp. This caused the phone to only see 4gb of internal storage. Came to xda and it was suggested to flash back original boot.img. once that was done 4gb issue was fixed and the radio was gone.
I did indeed try every solution offered (thanks again for all the effort, DrakenFX and others). But, I've come to the conclusion that this is not going to get fixed until XTE releases US images. For other people's sake I hope I am wrong, but I myself decided to proceed with the exchange where I bought it, as I was right at the end of my 14 days (newegg doesn't seem to give the 30 days that xte does). I may be out of an Axon 7 for a while, so for now I am on my amazon ads, Blu R1 HD (with ads defeated

Is there a guide to go back to stock for the A2017G?
i'm on B02 with root and the bootloader still locked.
Like to go back to stock now that ZTE is working on an update to give the A2017G an unlocked bootloader.

Hi all,
I am currently experiencing a bootloop on my Chinese Axon 7. Some of you regulars may have seen me asking in other threads because I've tried to fix it myself, but I've kind of run out of options. Sincerely hoping one of you can help me out!!! I'll buy the winner a beer or 2, haha!
Back story:
Was on B07 with root (tenfar's tool) with locked bootloader and had some issues with the ROM. Like vibrating when I opened the camera and battery drops. So I decided to upgrade to B09. Placed the OTA on SD card and went to: Settings -> update. Worked fine. So I connected it to my PC and made a dump (tenfar's dump tool) of my recovery and boot and stored them. Then I ran the Tenfar's tool, the B09 version and it went like the last one. But when I booted I didn't have wifi, and other issues came up. So I thought: did I make a mistake? So I read it again, checked the COM port again... all checked out. And used Tenfar's tool again. After that it didn't even boot anymore! It plays the nice boot animation and then gets stuck on the end screen with all the pictures.
So after that I restored my dumped recovery.img and boot.img. This is when I knew something was wrong: it still didn't boot! I reset data/cache in the stock recovery: no boot. Still stuck at the end of the boot animation.
What I've tried:
- Flashing the stock B09 update.zip with TWRP.
- Flashing the stock B09 update.zip without updater-script 'assert' and 'get-prop' line. TWRP says 'update.zip is corrupt'. Doesn't install.
- The I put it on SD card and internal memory and tried updating it with stock recovery: 'sorry you cant sdcard upgrade'. That's all it says.
- ADB sideload stock recovery: 'cannot load update.zip'.
I tried different ADB versions, Windows and Mac, different drivers... I tried formatting SD card as FAT32.. Tried different SD card.. Doesn't make a difference.
TWRP log says it can't pass the Zip verification when I try that. If I turn that off it says re.product.name is wrong. But I checked build.prop and updater-script. It's the same! But somehow TWRP comes up with a different one. Also tried removing getprop and assert lines from updater-script. But then it says: ZIP file is corrupt.
TWRP log after trying original, stock B09 flash:
http://pastebin.com/cJivE2TK
Build.prop: moved from /system with TWRP:
http://pastebin.com/b6rryc2n
Build.prop: ro.product.name=P996A03
Updater-script:
Code:
getprop("ro.product.device") == "ailsa_ii" || abort("This package is for \"ailsa_ii\" devices; this is a \"" + getprop("ro.product.device") + "\".");
assert(getprop("ro.product.name") == "P996A03");
But TWRP log: ro.product.name=cm_ailsa_ii
So, yeah, I've been trying on and off for the past couple of days in between work and travelling. Got a back-up phone so it's not that bad. But I really like this phone! It's just been such a pain in the ass the past few days...
I tried researching online and reading all the XDA posts. It is my fault this has happened and feel such a newb for not being able to fix it myself
Many thanks in advance!

aPexalpha said:
Hi all,
I am currently experiencing a bootloop on my Chinese Axon 7. Some of you regulars may have seen me asking in other threads because I've tried to fix it myself, but I've kind of run out of options. Sincerely hoping one of you can help me out!!! I'll buy the winner a beer or 2, haha!
Back story:
Was on B07 with root (tenfar's tool) with locked bootloader and had some issues with the ROM. Like vibrating when I opened the camera and battery drops. So I decided to upgrade to B09. Placed the OTA on SD card and went to: Settings -> update. Worked fine. So I connected it to my PC and made a dump (tenfar's dump tool) of my recovery and boot and stored them. Then I ran the Tenfar's tool, the B09 version and it went like the last one. But when I booted I didn't have wifi, and other issues came up. So I thought: did I make a mistake? So I read it again, checked the COM port again... all checked out. And used Tenfar's tool again. After that it didn't even boot anymore! It plays the nice boot animation and then gets stuck on the end screen with all the pictures.
So after that I restored my dumped recovery.img and boot.img. This is when I knew something was wrong: it still didn't boot! I reset data/cache in the stock recovery: no boot. Still stuck at the end of the boot animation.
What I've tried:
- Flashing the stock B09 update.zip with TWRP.
- Flashing the stock B09 update.zip without updater-script 'assert' and 'get-prop' line. TWRP says 'update.zip is corrupt'. Doesn't install.
- The I put it on SD card and internal memory and tried updating it with stock recovery: 'sorry you cant sdcard upgrade'. That's all it says.
- ADB sideload stock recovery: 'cannot load update.zip'.
I tried different ADB versions, Windows and Mac, different drivers... I tried formatting SD card as FAT32.. Tried different SD card.. Doesn't make a difference.
TWRP log says it can't pass the Zip verification when I try that. If I turn that off it says re.product.name is wrong. But I checked build.prop and updater-script. It's the same! But somehow TWRP comes up with a different one. Also tried removing getprop and assert lines from updater-script. But then it says: ZIP file is corrupt.
TWRP log after trying original, stock B09 flash:
http://pastebin.com/cJivE2TK
Build.prop: moved from /system with TWRP:
http://pastebin.com/b6rryc2n
Build.prop: ro.product.name=P996A03
Updater-script:
Code:
getprop("ro.product.device") == "ailsa_ii" || abort("This package is for \"ailsa_ii\" devices; this is a \"" + getprop("ro.product.device") + "\".");
assert(getprop("ro.product.name") == "P996A03");
But TWRP log: ro.product.name=cm_ailsa_ii
So, yeah, I've been trying on and off for the past couple of days in between work and travelling. Got a back-up phone so it's not that bad. But I really like this phone! It's just been such a pain in the ass the past few days...
I tried researching online and reading all the XDA posts. It is my fault this has happened and feel such a newb for not being able to fix it myself
Many thanks in advance!
Click to expand...
Click to collapse
PM I'll help you create a flashable zip base on B10 (Full update release), just make sure to have the following apps:
- 7Zip
- Notepad++

I am was rooting my axon a2017 on b10 chinnese version without any backup after rooting got password screen after boot then i was do factory reset and format data and all looking good but after that i saw that i dont have google play app so i installed macro gapps 6.0 after flashing phone stuck on axon screen (after zte logo) for long time i been wait up to 30 minutes and nothing was done..also i have the message on twrp about the modification(dont understand why i have this message all the time) i saw in xda forum that need to install supersu so i search on internet and was flash super su 2.65 and then when i am was boot device go to zte logo screen and then turning off when i connect the device as mtp device named as a2017u (whats worng with it??? I was flashed b10 root boot.img)
I regret about this root and want to back all to stock without any problems need help from someone
I need stock b10 boot.img if someone can upload
Many thanks!
---------- Post added at 04:23 AM ---------- Previous post was at 04:11 AM ----------
DrakenFX said:
PM I'll help you create a flashable zip base on B10 (Full update release), just make sure to have the following apps:
- 7Zip
- Notepad++
Click to expand...
Click to collapse
Its will help me too i think

Dear All,
ZTE Axon 7 A2017 (Chinese version) Stuck on Bootloader mode.
Device after power on will Stuck on ZTE logo even power button press longer also will Off and came back to square one and the only way to power off is via selection on bootloader page via volume button which consists of Recovery mode, Power Off, Bootloader and some other mode which I can't recall.
History of this issue. Please bear with long story.
Manage to install MM ROM with B13 via sd card installation via update software in phone setting. follow by Unlocked bootloader and Install TWRP 3.1.1.0 then try few different ROM until one day when I use Xiaomi flashtool my PC crash half way through during flashing resulting in device with Pure Chinese ROM and TWRP also got corrupted, when I said corrupted because I install TWRP 3.1.1.0 but when I go to Recovery mode it shows TWRP 3.0 something. with this corrupted TWRP when I try to install ROM it will show loading but end result is NIL meaning same ROM nothing change.
Until this stage I never did a TWRP backup because all this while the ROM is Not my type of ROM from this junction when I boot back to TWRP and I did Advance Wipe most of it except external sd card thinking that I may be able to install fresh TWRP but my Recovery TWRP is residing in phone storage resulting in No more TWRP recovery software. next thing I did was I connect phone to PC and ran adb fastboot tool to detect device and managed to detect device in recovery mode and I make decision to Locked back the bootloader and did just that and Locked bootloader is Succes and it also Erased everything during the process.
To cut short the story after Locked back bootloader only Bootloader mode is accessible and when I connect to PC and enable Recovery mode (Black screen) and EDL mode (Black screen) from Windows PC Device Manager COM port able to see Qualcomm 9008 for this 2 mode.
I must admit after few days of trying to resolve this Stuck Bootloader issue I almost give up.
Then I remember this Woodo magic by jcadduno which recommends XM flashtool version 2016.08.30.0 but unable to flash after trying few version Xiaomi flashtool and the very latest and I mean from Xiaomi Flashtool webpage http://xiaomiflashtool.com/
version 20170425 that break the ice and finally able to load A2017U ROM because this US ROM my phone No Network detected.
From here onwards I unlocked bootloader and install back TWRP (Installation of TWRP via Axon7toolkit) because of Network issue since I got TWRP I install back A2017 ROM but still Not satisfied because Chinese ROM certain Apps having issue because of Google services and I chance upon this Conversion A2017 to A2017U ROM (Hybrid ROM caused ROM is US and Modem from Chinese Modem)
that I'm stay put right now and my phone now is A2017U model.
I hope this experience can help others with similar Stuck bootloader and those who wish to convert A2017 to A2017U ROM.
below is the link that I described Woodo magic.
https://forum.xda-developers.com/axon-7/development/edl-emergency-dl-mode-twrp-unlock-t3553514
Straight forward Axon7toolkit, please don't use Chrome browser cause Chrome will Automatically Delete it after complete download for my case I used Microsoft Edge.
https://forum.xda-developers.com/axon-7/development/tool-axon7toolkit-t3573108
below is the link to Hybrid ROM for A2017U
https://androidfilehost.com/?fid=457095661767154458 by Michael Warner After flash install No verity patch for the bootloader.
Cheers.

I am stuck in a position where I can restore my nandroid backups but get Error 7
when trying to reinstall any Rom on a2017u I was able to fix the unlocked bootloop
by the EDL method. The Rom's are the same as the backups. I think I tried to role back to B29 Causing the bootloop) and have had problems ever since.
Should I try flashing A2017Uv1.1.0B32_Bootstack_by_DrakenFX since the Rooms are all B32?
The B15 and B19 Nandroid's still Restore fine.

Hello all,
i don't get onto forums very often but i thought this was a nice one to add to. i've rooted a few motorolas, a few ztes, a cat; i've also bricked those ztes, cat & a few samsungs. i'm dealing with two Axon7U's; one is factory MM-b29, the other is N-b35.
while screwing around with TWRP, i bricked the b35 (the b29 has been bricked for a month at this time) after i had it almost perfected. by perfected i mean a custom recovery & root user access fully acquired. with DrakenFX's {YOURS; thanks so much. i'm learning to get along with linux} extensive files created to save people from themselves i was able to unbrick the b35. albeit its CELLULAR DATA became unhinged; that's something i could've lived with except it was a loaner and had NO CAMERA! it's camera (along with the ability to push both volume buttons at once for say EDL mode...) was damaged having been beaten across a steering wheel several times. so with my newfound unbricking superpowers i decided to take another crack at the b29. managed to get it unbricked but couldn't get it setup with both TWRP & SuperSU without losing one, the other or, both. at times it didn't even boot up. i was doing pretty much everything cited above for reasons 'why'. best way to learn is by trial & error (if one can afford it).
the b29 is rooted right at this moment; i'm working on it as soon as i leave this posting. i used Axon7_EDL_Tool. i used Axon7root. i used MiFlash. i used Fastboot. I used ADB App Controller software too. back & forth i fought for three days mostly due to downloading glitches and i prevailed. i manipulated a stock OTA full system update.zip by happenstance and it Auto_Updated over itself. in other words it already had the same ROM installed. i don't know what it tested to realize it needed to update to what it already had. it didn't have CELLULAR DATA either. just like the b35, it broke somehow while flashing TWRP or SuperSU. funny thing is it still wanted to update that same ROM after it did. while perusing the system update setting(s) i noticed it had downloaded N-b15 and it wanted to update b29 AGAIN! i opted for the Nougat update. it did alright and appears to have fixed it's CELLULAR DATA too. i haven't looked at it since but i'm confident i can gain root user access with a minimal amount of effort.
The main problem i've had with dealing with bricked devices is the age of the file downloads. most of them are simply GONE!, expired links and whatnot. if i'd had a clear path say from a custom recovery and rooted boot image of my factory version or the path that leads to it, i'd have been fixed up long ago. i've found partial 'paths' if you will that almost get me there but no quite all the way. flashing images & zips through fastboot are different from their counterparts entered through TWRP or Emergency Download Mode which of course are both different too. three different ways to get into one's phone makes it almost impossible to keep them perfected.
i'm not sure i did what i'm supposed to regarding this thread. Thank you DrakenFX for your time & knowledge; you've saved my old Axon7!

Hello all update;
b35 Nougat phone is retired. b29 managed to update itself to b35 7.1.1. however, its CELLULAR DATA is still broken. i haven't managed to figure out how or where it's broken so i cannot fix it.
what i'm trying to do now is flash Magisk instead of SuperSU and using a TWRP version 3.0.3-1. heck i've used all of TWRP's versions in my efforts to reacquire CELLULAR DATA.
crazy part is the phone knows its CELLULAR DATA carrier and freely displays all of its hookup info. this is very frustrating.

Stock recovery extraced from BTV-W09C233B019 ROM - untested

Hi M3 users,
I'm a long time lurker and reader on XDA. Now it's time to give something back or at least participate
Following my recent M3 purchase a dugg a bit deeper into this topic and tried to get us the stock recovery for our devices.
I'm not really a dev. I just used the information I found here and in the russian forum where greatslon (thank you guy) is posting his work.
If you find an error in the process please let me know. The files have not been tested in any way. I have no idea if this would even work (encryption and so on).
So I managed to extract the recovery.img file from the chinese rom. This method will also work for the LTE variant.
Maybe @greatslon or @somboons can share their view on the topic or maybe @somboons can even use it in his tool.
Resources
http://4pda.ru/forum/index.php?showtopic=780572&st=120
http://forum.xda-developers.com/showthread.php?t=2433454
http://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
https://play.google.com/store/apps/details?id=com.teammt.gmanrainy.huaweifirmwarefinder
Tools used
Huawei Firmware Finder (Team MT)
Huawei Update Extractor
Download
M3_BTV-W09C233B019_recovery.zip
Process
1. Start firmware finder (did use the android version)
2. Change device to BTV-W09C233
3. Downloaded the firmware B019 for BTV-W09C233 (no firmware for other variants present ATM)
4. Extracted and copied update.app to SD card
5. copy to PC
6. Extract recovery.img and recovery2.img using Huawei Update Extractor
Best regards,
Benjamin

Don't quite understand what's this for. First of all, recovery should be the same version as your ROM. I don't know if their mismatch will immediately lead to some malfunction, but some people on 4pda said they should match. Second - stock recovery's functions are limited to factory reset (wiping data, cache, etc.) and installing OTA updates. Without changing OEMINFO (and it's still unconfirmed), you won't be able to install any OTA except those, intented for your model and region, so again there's no need to install a higher version of recovery than your ROM is. But anyway, thank you for the extraction instruction.
P.S. I think there's no need to flash both recovery and recovery2. Recovery2 can be successfully replaced with TWRP and this combination is really great, cause you can launch TWRP by holding Volume Up button only.
And the only reason why you should keep recovery original is that it doesn't really wipe /data - it also creates some files there like custom.bin, containing your regional settings.

Hi Slavon,
Thanks for your highly appreciated comment. @somboons was looking for a stock recovery so I thought this might help.
Your given information are really helpful. I did not know that you could flash TWRP in recovery2 and replace erecovery Handy information.
I'm pretty new to the Huawei structure so always glad to learn something.
EDIT
A lot of good information can be found here: http://forum.xda-developers.com/honor-7/general/dual-recovery-honor-7-t3308398
Thank you very much,
sselpeelsxx

Giving Back
Benjamin,
I've also been a long time XDA lurker. Most of the devices I have owned were mainstream and thus already had a very active XDA developer community; Even if root had yet to be achieved, there would be hundreds of messages on the topic.
It seems the Mediapad M3 is just getting started. I am a developer of over 20 years, but very little android experience. However, I have recently spent a considerable amount of time (about 50-100 hours) working with the low level ADB protocol source code. And I have rooted and flashed no less than 50 devices, everything from cell phones to Android TV devices to routers.
I'm going to take this device on as my first real dev effort in this arena.
I have a few goals:
1. Get working backups for people that soft-brick or need to revert (including myself).
2. Recompile TWRP for the M3 to confirm greatslon's work, and better understand the process.
3. Release a stock rom that's pre-rooted and cleaned up (not that there was a lot of bloat on my device).
4. Release a custom rom that's not MIUI (perhaps based of CyanogenMod).
Since I have virtually no experience, I am sure these goals are quite lofty and will take some time. But hey, you got to have a plan, and I don't have anything else to work on right now.
Let me know if you want to work on anything together, or if you need any help with anything development related.
- 0D0A

Hey hey 0D0A,
I totally agree with you regarding the backups, I think once the first OTA update is pushed for the EU and US devices we have a good and safe way to go back.
Especially the US owners are struggling with greatslons TWRP version, that's the first thing we should tackle after the backup topic is cleared
I will contact you regarding possible work
Best regards,
Benjamin

can flash twrp via fastboot but get error saying and no recovery
hi, first thanks greatslon for doing the work on m3.
i seem to have succeeded in getting stuck and can't get it to boot into your custom twrp. adb on linux was working fine, but no longer. ditto for fastboot just get "waiting for devices" now. i switched to win10 and installed the hisuite app so i can use fastboot but still no adb. so i have tried to flash recovery and recovery2 but when i try to boot recovery i get error "Func NO: 11 (recovery image) ERROR NO: 2 (load failed)."
i then downloaded your custom rom and tried to flash the boot for that still no luck. i can't use adb so i am not sure how to just flash the custom rom with fastboot without being able to get into any recovery.
i did have this all rooted and working with your twrp but kept having issues with dpi and there was an ota update (b003) which wouldn't apply. so i tried to restore backup and it wen't south from there. basically now can't do much other than see the unlock "can't be trusted" page and bootloader.
any suggestions?

Desperately need stock recovery img, not sure exactly what when wrong, but it is stuck in a horrible boot loop. Tried Benjamin's recovery files and they seem to remove twrp and put it somewhat back to normal, but can only access the emui recovery and that fails to load the files. Put twrp back and tried greatslon's ROMs, they load but goes back to boot loop. Wipe and format everything, install my original backup through twrp recovery, it says it works, but again, back to boot loop... at this point I think I'm dead... any ideas, any word on the official recovery img? anything? Help!!

What device do you have? And what version were you on?

sselpeelsxx said:
What device do you have? And what version were you on?
Click to expand...
Click to collapse
I have the M3, BTV-W09, not sure what version, MM6.0 EMUI 4.1

Anyone have any other ideas on horrendous boot loop?

sselpeelsxx said:
Hey hey 0D0A,
I totally agree with you regarding the backups, I think once the first OTA update is pushed for the EU and US devices we have a good and safe way to go back.
Especially the US owners are struggling with greatslons TWRP version, that's the first thing we should tackle after the backup topic is cleared
I will contact you regarding possible work
Best regards,
Benjamin
Click to expand...
Click to collapse
Hello, I am unlocked, TWRPed, and rooted, but am trying to reverse all of that. My build number is BTV-W09C128B002. Is it safe to download the stock recovery from the OP for my device? Or do I really need the C128 version?

Hello and sorry for the late response, you would need the matching version for your C128 device.
I may be able to extract recovery from an update, I have to look into this tomorrow.
Regards

sselpeelsxx said:
Hello and sorry for the late response, you would need the matching version for your C128 device.
I may be able to extract recovery from an update, I have to look into this tomorrow.
Regards
Click to expand...
Click to collapse
Thanks! I have been able to use the Huawei Extractor to extract a recovery.img from OTA updates, but have been afraid to try flashing it. It has been recommended to hold off on trying that since that recovery.img is from an OTA and not a FULL update. Any thoughts?

Recovery unaviable after Nougat update

Hey people,
I've updated to the unofficial Nougat leak here and ever since I can't get into the recovery. The ROM is OK but no matter what I do I can't get into the recovery. After "adb reboot recovery" I just get stuck in a boot loop and I must get into the upgrade utility and restart phone into the system from there. I've tried to flash few other recovery but nothing works. So far I'm fine with the system and I'd like to also try LineageOS but I have no way to flash the ROM. I have tried "Fastboot flash zip xx.zip" from the bootloader to flash LineageOS but it told me I don't have permissions so it was no good.
So do you folks here have any idea what I did wrong and how to make the recovery work again? I'm kind of learn from the tutorial guy so I'll post the sources I've been using to do the flash.
Unlocking bootloader and flashing new recovery
I've only used the unlock bootloader and flash twrp sections with their provided recovery. I've also tried to flash THIS recovery by Meticulus after the nougat update.
Flashing the ROM + used ROM
Used the old process because upgrade with system utility kept giving me errors.
Model number - VNS-L21
Also if this issue can't be (yet) fixed do you know any way to safely flash ROMs without recovery?
Thanks for any kind of help

You cannot flash any ROM in the nougat recovery, because it does not support /data mounting. Downgrade to MM and install the ROM you want from there.

@SALVO9
Ok, thank you for the reply. I'll probably try to downgrade and flash it afterwards to know which ROM suits me better. All I need to do is find the stock ROM copy it to the phone and restart with all buttons pushed right? Also, do you have any info about when there will be a nougat recovery that can mount /data?

TheAstaros said:
@SALVO9
All I need to do is find the stock ROM copy it to the phone and restart with all buttons pushed right?
Click to expand...
Click to collapse
No.
Flash proper OEMinfo first!

@Schlengge
Thanks for the advice. I did my research because I didn't know a thing about oeminfo and I have hit a wall since my phone is not rooted(Should have mentioned that earlier I know) and I'm supposed to replace custom.bin and then flash the img. So afterwards I searched how to root this nougat ROM and found nothing no app was working and everything I found was just using the phone's recovery which I can't access. Does anything come to mind? I will continue getting through the pages of google but I don't think I'll find anything useful.
EDIT> After some searching I found the official rollback package. I have yet to test it (downloading on slow connection atm) and I hope it will work.

Ok it's finally done and I'm back at old stock ROM(EMUI 4.1.1 VNS-L21C432B160) after hours of searching I gave up on the oeminfo or rooting the phone. I searched for the stock firmware and found some rollback packages on the Huawei site. I will post the links in there you even have instructions packed with the zip.
LINK1
LINK2
Download both start with the smaller one because it's flashing first and follow the instructions in the pdf. Worked for me so hope it also helps you.
Also as I found out just now this rollback also locks back your bootloader so be sure to unlock it back again with the code.

How to unroot and get locked bootloader again

Hi, I rooted my tablet about 2 months ago - Now I have root and TWRP. Now I need to remove root and put a stock image with locked bootloader.
Do you think I can do it by my own? (for example, with fastboot?)
Many thanks
Daniela

Huawei Mediapad M3 - Unroot - Lock bootloader
danibyte27 said:
Hi, I rooted my tablet about 2 months ago - Now I have root and TWRP. Now I need to remove root and put a stock image with locked bootloader.
Do you think I can do it by my own? (for example, with fastboot?)
Many thanks
Daniela
Click to expand...
Click to collapse
Hi,
You can achieve this by following methods.
Method 1
Since you have TWRP
you can flash the stock firmware from TWRP and it should lock the bootloader, unroot and then overwrite the twrp with stock recovery.
What you need?
For this method you need the stock firmware zip files and firmware finder app from google store.
Method 2 (risky, not recommended)
Download SRK tools by somboons
From here https://forum.xda-developers.com/showpost.php?p=66627615&postcount=2
Unzip the file
Open the application
Then on the main screen, you will have plenty of options to type 1, 2, 3, etc..
Just type 000 to enter the command prompt here.
Once you are in that command prompt you can type the adb commands.
to lock the bootloader you need to type
fastboot oem relock xxxxxxx (just check this command. I think
xxxxx is your bootloader unlock code (yes you have to use the unlock code here again)
this will relock the bootloader.
now to unroot
you can just flash stock firmware using dload method.
How?
download the stock firmware
extract the update.app
put this update.app in a dload folder in sdcard.
you have to create this folder on sdcard and name it as dload.
then you can use the code from dialer pad
*#*#2846579#*#*
from there select SDcard upgrade.
It will reboot and flash the stock firmware. You no longer have root. It will also overwrite the twrp recovery with stock recovery.
I would recommend the method 1. It is safe, easy and should complete the desired tasks within no time.
Method 2 has lot of steps and there is risk involved so I cannot recommend this procedure as confidently as the first one.
I have the Huawei Mediapad M3 LTE version and also Huawei Mate 8. There are few similar functions in Huawei devices.
So now the question is where you will find the stock firmware?
You can find the stock firmwares using firmware finder app in google store.
From here -> https://play.google.com/store/apps/details?id=com.teammt.gmanrainy.huaweifirmwarefinder&hl=en
Install the app.
Open the app
It will automatically find the right firmware's by detecting your tablet model.
All links might not work
So check the one that is working and download that firmware - preferably full firmware.
You will get the zip files if there are two or just one.
then you can follow the method 1.
Hope this works out for you. Hope you find this information useful. :good::good::good:

Hi and many thanks for your kind response!! I tried as you adviced, the problem is that now i have a custom rom and this is the reason, I suppose, for which, every firmware i try to flash, it says "this version is not compatible with the one installed". For what you know, is there a way to flash the firmware without it to check the one already installed?
Thankssss again!!
Daniela

Installing Stock Rom - Huawei Mediapad M3
danibyte27 said:
Hi and many thanks for your kind response!! I tried as you adviced, the problem is that now i have a custom rom and this is the reason, I suppose, for which, every firmware i try to flash, it says "this version is not compatible with the one installed". For what you know, is there a way to flash the firmware without it to check the one already installed?
Thankssss again!!
Daniela
Click to expand...
Click to collapse
Hi,
Can you give me more details about your tablet ? It will be in settings - > about device
like
tablet version - is it BTV-DL09 or BTV-DW09?
DL09 is the LTE version
W - is the wifi version
which OS are you running currently?
TWRP version ?
How did you try to flash ? When method did you follow?
I don't know if there is a way to check what you are asking. But we can certainly resolve your issue.
When I was flashing and experimenting on my Huawei Mate 8 last week I came across similar errors. That time I had to dload rollback package from SDcard and then I flashed the EMUI4.1 OS to get back to stock. Now I feel that is the case with your tablet too.
Process is same for both devices. But the files used to flash are different (naturally). That is why I am confident that we can try to come up with a solution.
Point to note
to flash stock rom, the following play a key role.
1) bootlocker - locked
2) recovery - stock
3) Rollback package ( this was really file for Huawei Mate 8, but is it important for Huawei Mediapad M3? I will try to find out).
At the moment, you have custom OS and custom recovery.
so best thing to do is flash the Stock ROM zip files from TWRP. I explained why it is better to do it this way.
Were you able to get the stock rom zip files?
Also please answer all the questions in this post so that I can help you better. :good::good::good::good::good:

Hi Sama, below in bold my answers.
Samavb said:
Hi,
Can you give me more details about your tablet ? It will be in settings - > about device
like
tablet version - is it BTV-DL09 or BTV-DW09?
It's the LTE version, BTV-DL09
which OS are you running currently?
Android 6.0, EMUI 4,1, Greatslon mod B030
TWRP version ?
Twrp doesn't start anymore and so did root. This happens since yesterday, after installing the custom rom.
How did you try to flash ? When method did you follow?
I installed firmware finder and tried the following firmwares :
BTV-DL09C233B332, 1273 MB, OTA
BTV-DL09C233B035, 173 MB, OTA
BTV-DL09C233B030, 1801 MB, FULL
and always I get the same response : your firmware version is not compatible - upgrade failed.
I don't know if there is a way to check what you are asking. But we can certainly resolve your issue.
When I was flashing and experimenting on my Huawei Mate 8 last week I came across similar errors. That time I had to dload rollback package from SDcard and then I flashed the EMUI4.1 OS to get back to stock. Now I feel that is the case with your tablet too.
Process is same for both devices. But the files used to flash are different (naturally). That is why I am confident that we can try to come up with a solution.
Point to note
to flash stock rom, the following play a key role.
1) bootlocker - locked
2) recovery - stock
3) Rollback package ( this was really file for Huawei Mate 8, but is it important for Huawei Mediapad M3? I will try to find out).
The bootloader is still unlocked. Do I need the unlock code, in order to lock it again?
At the moment, you have custom OS and custom recovery.
so best thing to do is flash the Stock ROM zip files from TWRP. I explained why it is better to do it this way.
I'm not sure that I still have custom recovery, cause I cannot go into it anymore...
Were you able to get the stock rom zip files?
Also please answer all the questions in this post so that I can help you better. :good::good::good::good::good:
Click to expand...
Click to collapse
Many many thanks again!!!!!!
Dany

Steps
danibyte27 said:
Hi Sama, below in bold my answers.
Many many thanks again!!!!!!
Dany
Click to expand...
Click to collapse
ok
so your root doesn't seem to work
you don't know if you have custom recovery
you are using EMUI 4.1
1) do the factor reset from the settings > go to -> Settings -> Advanced settings - > backup & reset - > factory data reset
do this - it should take few minutes
2) then -> developer options - > turn on "oem unlock" and " usb debugging " - on
3) please download the srk tools - I think I gave you the link to that software in my previous posts - > please download - extract keep it ready.
4) open the SRK tools - > type 000 in the place where it asks you to type 1 or 2 or 3 .. - you should get command prompt
5) Now press volume down button and hold .. and then connect your tablet to computer ( you have to enter bootloader mode)
6) now we need to lock the bootloader - so run the adb command ( for this you need to put the tablet in bootloader mode )
fastboot oem relock xxxxxxx or fastboot oem lock xxxxxxx
yes you will need the unlock code and in the above command replace the xxxxxx with your unlock code.
lock your bootloader.
7) it will do factory reset - and then your bootloader is locked.
Now at this point you have bootloader locked and you have normal firmware but since you want to go back to stock rom
I am still not clear about the build number. Can you give me the build number ? its in settings - > about tablet - > mine is BTV-DL09C100B006
Model number you and I have the same version. BTV-DL09. But it is the build number which matters.
I checked the firmware finder - unfortunately it is not giving the full firmware - only ota updates.
so the factory reset in the first step above is very very crucial.
The other safe way to get the firmware is through Hisuite
for this you need Hisuite software - you can either go forward to B009 or if it is giving you that option to switch to earlier version then you can go back. But I highly doubt it will give anything. So just try to go forward with B009 ROM.
try all these steps... see if you can succeed to any extent. In the mean time I will try to search for full firmware and if I do I will update this reply or give a new reply.
My name is Sam Hope this works out for you. Don't worry if this doesn't work then we will think about alternatives. But these are very important steps. Good luck. :good::good::good::good::good:
Cheers!
Sam
Update: After going through some of the threads on xda I came across one russian website
http://4pda.ru/forum/index.php?showtopic=780572&st=0#entry54523165
you can check the firmwares. They are all custom firmwares. But I am not sure if the version is compatible. check if your tablet buildnumber is BTV-DL09C100B006 or BTV-DL09C233XXX . that is something you need to be careful.
update2 :- http://hwmt.ru/oth/HWFF/info/view.php
this link contains all stock firmwares - but they are all OTA and not Full package.

I have the US version (I believe it is distinguished as BTV-W09C128Bxxx). Using the firmware finder, it appears the only old firmware available for my build is B001_demo and it's only an OTA. If my goal is restore stock recovery, will downloading this and flashing this do anything? I currently have greatslon's TWRP rooted running stock firmware version BTV-W09C128B002. Thanks!

Btv-w09c128xxx
asianpianoman said:
I have the US version (I believe it is distinguished as BTV-W09C128Bxxx). Using the firmware finder, it appears the only old firmware available for my build is B001_demo and it's only an OTA. If my goal is restore stock recovery, will downloading this and flashing this do anything? I currently have greatslon's TWRP rooted running stock firmware version BTV-W09C128B002. Thanks!
Click to expand...
Click to collapse
if you check this Russian site
http://hwmt.ru/oth/HWFF/info/view.php
you will find 8 matches for your model.
unfortunately, all are OTA and not full firmware. OTA is good for updating from lower version to higher version. But for downgrading or returning to stock I am not sure. In my experience, I always used the FULL package.
your current situation
1) you have TWRP
2) Rooted ( so bootloader unlocked)
your options
1) Returning to stock seems to be difficult. Only possible way is Hisuite but it won't recognize your device as your tablet is rooted and bootloader unlocked.
To return to stock
a) you need stock recovery ( you will get this once you flash Stock rom in twrp or through erecovery - download stock rom)
b) bootloader locked (this is possible by adb commands using SRK tools )
c) Stock rom (this is the problem - I couldn't find a single site which is hosting FULL stock rom )
d) rollback package ( If there is one, Huawei had it for Huawei mate 8 but for mediapad m3, does it have? I don't know) - I hope this is not mandatory. We should be able to get the job done using a,b,c . previous points.
From my experience, I found that if you have a, b, c you can go back to stock easily.
I saw another Russian site where they have custom roms. But you have to be careful. Check if the version they put out is compatible with yours. You mentioned that your tablet version is BTV-W09C128Bxxx. It looks they have custom roms for BTV-W09C233xxx Can you flash this firmware on your tablet? that is tricky and can be risky too. If any one has done it, then it would be nice if they can share their experience.
Link to this Russian site - > http://4pda.ru/forum/index.php?showtopic=780572&st=0#entry54523165
The OTA in the firmware finder is not enough to go back to stock. You can try but I am not hopeful because it is not complete firmware and it might get stuck in between or fail.
For now. you can do factory reset from TWRP. That is the only thing that seems possible. Without stock rom or rollback package, it is very difficult to go back to stock. But if you manage to get stock rom for your device. Then flash it in TWRP. Once it completes you will have stock rom installed on your device.
Hope you find this information useful :good::good::good::good:

Samavb said:
if you check this Russian site
http://hwmt.ru/oth/HWFF/info/view.php
you will find 8 matches for your model.
unfortunately, all are OTA and not full firmware. OTA is good for updating from lower version to higher version. But for downgrading or returning to stock I am not sure. In my experience, I always used the FULL package.
your current situation
1) you have TWRP
2) Rooted ( so bootloader unlocked)
your options
1) Returning to stock seems to be difficult. Only possible way is Hisuite but it won't recognize your device as your tablet is rooted and bootloader unlocked.
To return to stock
a) you need stock recovery ( you will get this once you flash Stock rom in twrp or through erecovery - download stock rom)
b) bootloader locked (this is possible by adb commands using SRK tools )
c) Stock rom (this is the problem - I couldn't find a single site which is hosting FULL stock rom )
d) rollback package ( If there is one, Huawei had it for Huawei mate 8 but for mediapad m3, does it have? I don't know) - I hope this is not mandatory. We should be able to get the job done using a,b,c . previous points.
From my experience, I found that if you have a, b, c you can go back to stock easily.
I saw another Russian site where they have custom roms. But you have to be careful. Check if the version they put out is compatible with yours. You mentioned that your tablet version is BTV-W09C128Bxxx. It looks they have custom roms for BTV-W09C233xxx Can you flash this firmware on your tablet? that is tricky and can be risky too. If any one has done it, then it would be nice if they can share their experience.
Link to this Russian site - > http://4pda.ru/forum/index.php?showtopic=780572&st=0#entry54523165
The OTA in the firmware finder is not enough to go back to stock. You can try but I am not hopeful because it is not complete firmware and it might get stuck in between or fail.
For now. you can do factory reset from TWRP. That is the only thing that seems possible. Without stock rom or rollback package, it is very difficult to go back to stock. But if you manage to get stock rom for your device. Then flash it in TWRP. Once it completes you will have stock rom installed on your device.
Hope you find this information useful :good::good::good::good:
Click to expand...
Click to collapse
Thanks for the reply and the useful information. It seems as though I'm out of luck unless I can find a FULL stock firmware package. However, you did mention that I can use Hisuite? Even though I am unlocked, TWRPed, and rooted, Hisuite still does recognize my device (I think it's because I'm on stock rom). When I click on System Recovery it just says "Your device system is running properly and does not need to be recovered." Is there another method I can go through using Hisuite to restore stock recovery?

Hope - Stock Rom - BTV- W09C128XXX
asianpianoman said:
Thanks for the reply and the useful information. It seems as though I'm out of luck unless I can find a FULL stock firmware package. However, you did mention that I can use Hisuite? Even though I am unlocked, TWRPed, and rooted, Hisuite still does recognize my device (I think it's because I'm on stock rom). When I click on System Recovery it just says "Your device system is running properly and does not need to be recovered." Is there another method I can go through using Hisuite to restore stock recovery?
Click to expand...
Click to collapse
That's great news.
Good that your tablet was recognized by Hisuite.
For system recovery to work. You have to press volume down and then connect the tablet.
Did you do it this way? I think you did.
Do you have "update" or "restore" option in Hisuite?
If yes when you click on "update" did you get "switch to earlier version" If it gives that then yes you can try but even then we have to keep fingers crossed until it completes the process successfully.
One more thing you can try is using HiCare. But this is for updating to nougat or for OS early adopters.
All the options are coming down to stock rom. If you have one stock rom. Then you can flash it in TWRP or extract the update.app and dload it using 3 finger rule.
Full stock rom - that is the key here. Is it possible for you to get the stock rom for your device? So far I found only OTA's from those Russian sites or custom roms for different models. It will be great if can find all stock firmware's for all the models. It will help many people. Since my tablet was working very well, I didn't think about rooting at all. Mine is BTV-DL09C100B006.
One last option is Unroot your tablet using Supersu app. And then flash boot.img (it is recovery.img not boot.img) from one of the OTA firmwares. that way you can get back to stock firmware. But this is tricky. You have to be very careful about this. If anything goes wrong here then you won't be able to boot into tablet. That is why I cannot recommend this option.
Sorry I made a mistake in this post. It is recovery.img not boot.img. Please be aware.
You can try - Factory reset - from inside the OS or from TWRP. :good::good::good::good:

Samavb said:
That's great news.
Good that your tablet was recognized by Hisuite.
For system recovery to work. You have to press volume down and then connect the tablet.
Did you do it this way? I think you did.
Do you have "update" or "restore" option in Hisuite?
If yes when you click on "update" did you get "switch to earlier version" If it gives that then yes you can try but even then we have to keep fingers crossed until it completes the process successfully.
One more thing you can try is using HiCare. But this is for updating to nougat or for OS early adopters.
All the options are coming down to stock rom. If you have one stock rom. Then you can flash it in TWRP or extract the update.app and dload it using 3 finger rule.
Full stock rom - that is the key here. Is it possible for you to get the stock rom for your device? So far I found only OTA's from those Russian sites or custom roms for different models. It will be great if can find all stock firmware's for all the models. It will help many people. Since my tablet was working very well, I didn't think about rooting at all. Mine is BTV-DL09C100B006.
One last option is Unroot your tablet using Supersu app. And then flash boot.img from one of the OTA firmwares. that way you can get back to stock firmware. But this is tricky. You have to be very careful about this. If anything goes wrong here then you won't be able to boot into tablet. That is why I cannot recommend this option.
You can try - Factory reset - from inside the OS or from TWRP. :good::good::good::good:
Click to expand...
Click to collapse
1) When you say pressing volume down and connecting the tablet, I'm not quite sure what you mean. Do you mean from power off? Anyways, from a power on state, I tried using the Update process within Hisuite and it downloads the B003 firmware, then boots into recovery (TWRP), attempts to flash it, fails, and then I manually have to hit restart system within TWRP.
2) I downloaded an OTA update.zip and could not find a boot.img.
3) Also, what does factory reset from inside the OS or from TWRP do exactly?
Thanks again!

Answers
asianpianoman said:
1) When you say pressing volume down and connecting the tablet, I'm not quite sure what you mean. Do you mean from power off? Anyways, from a power on state, I tried using the Update process within Hisuite and it downloads the B003 firmware, then boots into recovery (TWRP), attempts to flash it, fails, and then I manually have to hit restart system within TWRP.
2) I downloaded an OTA update.zip and could not find a boot.img.
3) Also, what does factory reset from inside the OS or from TWRP do exactly?
Thanks again!
Click to expand...
Click to collapse
I am sorry. I should have explained it better.
Pressing volume down and holding it for few seconds and then connecting to computer will take you to bootloader mode.
Then you can do the system recovery.
Yes, if you have stock recovery it will go smoothly. You have BTV-W09C128B002. So you need boot.img of the stock firmware belonging to this OS. then you have to flash that using the below adb command
fastboot flash recovery recovery.img
this should get back the stock recovery. Once you have this. You can try the Hisuite again, this time hopefully it should complete the process.
- you have the update.zip - > extract the update.app -> use Huawei update extractor (software in the attachment) -> extract this zip - > run Huawei UpdateExtractor - now open the update.app - > you will be able to see the recovery.img extract it. Flash it using the adb command in SRK tools.
you can download SRK tool from here -> https://forum.xda-developers.com/showpost.php?p=66627615&postcount=2
Open this tool - > type 000 where it is giving you an option to type 1, 2, or 3 etc.. you will get command prompt . there you have to type the fastboot command to flash the boot.img.
But once again. Just want you to know this process is risky. Wrong file or if anything goes wrong you won't be able to boot into your device. So please be careful. It is risky. Please do not proceed with these steps. Flashing the stock rom is the right way. Or Hisuite. Those are safe methods. But not this.
Factory reset from inside the OS means - > go to settings - > advanced systems -> backup & reset -> factory data reset
that will do the factory reset on your device.
or
since you have TWRP. you can boot into TWRP - go to wipe - > there you will have factory reset. you can do it that way too.
I apologize for not explaining properly. I am sorry I made a mistake. It is recovery.img not boot.img.
Hope you found this information useful. :good::good::good::good::good:

Hi Sam!
unfortunately the custom rom I put 2 days ago hiddens the build numer (it says "B030 greatslon mod") but I annotated the previous one, which was the one you said "BTV-DL09C100B006".
Now I'm at work but this evening I'll try to do what you adviced. Thanks again and have a good day
Daniela

Samavb said:
I am sorry. I should have explained it better.
Pressing volume down and holding it for few seconds and then connecting to computer will take you to bootloader mode.
Then you can do the system recovery.
Yes, if you have stock recovery it will go smoothly. You have BTV-W09C128B002. So you need boot.img of the stock firmware belonging to this OS. then you have to flash that using the below adb command
fastboot flash recovery recovery.img
this should get back the stock recovery. Once you have this. You can try the Hisuite again, this time hopefully it should complete the process.
- you have the update.zip - > extract the update.app -> use Huawei update extractor (software in the attachment) -> extract this zip - > run Huawei UpdateExtractor - now open the update.app - > you will be able to see the recovery.img extract it. Flash it using the adb command in SRK tools.
you can download SRK tool from here -> https://forum.xda-developers.com/showpost.php?p=66627615&postcount=2
Open this tool - > type 000 where it is giving you an option to type 1, 2, or 3 etc.. you will get command prompt . there you have to type the fastboot command to flash the boot.img.
But once again. Just want you to know this process is risky. Wrong file or if anything goes wrong you won't be able to boot into your device. So please be careful. It is risky. Please do not proceed with these steps. Flashing the stock rom is the right way. Or Hisuite. Those are safe methods. But not this.
Factory reset from inside the OS means - > go to settings - > advanced systems -> backup & reset -> factory data reset
that will do the factory reset on your device.
or
since you have TWRP. you can boot into TWRP - go to wipe - > there you will have factory reset. you can do it that way too.
I apologize for not explaining properly. I am sorry I made a mistake. It is recovery.img not boot.img.
Hope you found this information useful. :good::good::good::good::good:
Click to expand...
Click to collapse
Yes, I continue to find your information very useful!
I have downloaded the Huawei Extractor and was able to use it to extract boot.img, fastboot.img, and recovery.img. However, this is for B003 and I am currently on B002. B002 does not appear to be available through the links you previously provided (neither OTA nor Full). Using B003 extracted files, what would be the proper sequence of flashing? Should I install the B003 boot.img first, hope that it boots into fastboot, and then flash B003 recovery.img in fastboot mode? How do I even go about installing B003 boot.img? Through SRK tools or adb? Or is this all too risky, and I should not even bother with B003 OTA files while I am still on B002?
Thanks again!

Hi Sam!!
I recovered my huawei unlock code and tried to relock the tablet, after having resetted it to factory (remember I still have custom rom).
After putting the tablet in bootloader mode and typing the following command on sk tools:
fastboot oem relock xxxxxxxxxxxxxxxxx (my unlock code)
I get:
....
FAILED (remote: stat not match)
finished. total time: 0.00 secs
I also tried "fastboot oem lock xxxxx" but it says "command not allowed".
Do you have ideas? I am blocked there...
Thanks!!
Daniela
Samavb said:
Hi,
You can achieve this by following methods.
Method 1
Since you have TWRP
you can flash the stock firmware from TWRP and it should lock the bootloader, unroot and then overwrite the twrp with stock recovery.
What you need?
For this method you need the stock firmware zip files and firmware finder app from google store.
Method 2 (risky, not recommended)
Download SRK tools by somboons
From here https://forum.xda-developers.com/showpost.php?p=66627615&postcount=2
Unzip the file
Open the application
Then on the main screen, you will have plenty of options to type 1, 2, 3, etc..
Just type 000 to enter the command prompt here.
Once you are in that command prompt you can type the adb commands.
to lock the bootloader you need to type
fastboot oem relock xxxxxxx (just check this command. I think
xxxxx is your bootloader unlock code (yes you have to use the unlock code here again)
this will relock the bootloader.
now to unroot
you can just flash stock firmware using dload method.
How?
download the stock firmware
extract the update.app
put this update.app in a dload folder in sdcard.
you have to create this folder on sdcard and name it as dload.
then you can use the code from dialer pad
*#*#2846579#*#*
from there select SDcard upgrade.
It will reboot and flash the stock firmware. You no longer have root. It will also overwrite the twrp recovery with stock recovery.
I would recommend the method 1. It is safe, easy and should complete the desired tasks within no time.
Method 2 has lot of steps and there is risk involved so I cannot recommend this procedure as confidently as the first one.
I have the Huawei Mediapad M3 LTE version and also Huawei Mate 8. There are few similar functions in Huawei devices.
So now the question is where you will find the stock firmware?
You can find the stock firmwares using firmware finder app in google store.
From here -> https://play.google.com/store/apps/details?id=com.teammt.gmanrainy.huaweifirmwarefinder&hl=en
Install the app.
Open the app
It will automatically find the right firmware's by detecting your tablet model.
All links might not work
So check the one that is working and download that firmware - preferably full firmware.
You will get the zip files if there are two or just one.
then you can follow the method 1.
Hope this works out for you. Hope you find this information useful. :good::good::good:
Click to expand...
Click to collapse
Samavb said:
ok
so your root doesn't seem to work
you don't know if you have custom recovery
you are using EMUI 4.1
1) do the factor reset from the settings > go to -> Settings -> Advanced settings - > backup & reset - > factory data reset
do this - it should take few minutes
2) then -> developer options - > turn on "oem unlock" and " usb debugging " - on
3) please download the srk tools - I think I gave you the link to that software in my previous posts - > please download - extract keep it ready.
4) open the SRK tools - > type 000 in the place where it asks you to type 1 or 2 or 3 .. - you should get command prompt
5) Now press volume down button and hold .. and then connect your tablet to computer ( you have to enter bootloader mode)
6) now we need to lock the bootloader - so run the adb command ( for this you need to put the tablet in bootloader mode )
fastboot oem relock xxxxxxx or fastboot oem lock xxxxxxx
yes you will need the unlock code and in the above command replace the xxxxxx with your unlock code.
lock your bootloader.
7) it will do factory reset - and then your bootloader is locked.
Now at this point you have bootloader locked and you have normal firmware but since you want to go back to stock rom
I am still not clear about the build number. Can you give me the build number ? its in settings - > about tablet - > mine is BTV-DL09C100B006
Model number you and I have the same version. BTV-DL09. But it is the build number which matters.
I checked the firmware finder - unfortunately it is not giving the full firmware - only ota updates.
so the factory reset in the first step above is very very crucial.
The other safe way to get the firmware is through Hisuite
for this you need Hisuite software - you can either go forward to B009 or if it is giving you that option to switch to earlier version then you can go back. But I highly doubt it will give anything. So just try to go forward with B009 ROM.
try all these steps... see if you can succeed to any extent. In the mean time I will try to search for full firmware and if I do I will update this reply or give a new reply.
My name is Sam Hope this works out for you. Don't worry if this doesn't work then we will think about alternatives. But these are very important steps. Good luck. :good::good::good::good::good:
Cheers!
Sam
Update: After going through some of the threads on xda I came across one russian website
http://4pda.ru/forum/index.php?showtopic=780572&st=0#entry54523165
you can check the firmwares. They are all custom firmwares. But I am not sure if the version is compatible. check if your tablet buildnumber is BTV-DL09C100B006 or BTV-DL09C233XXX . that is something you need to be careful.
update2 :- http://hwmt.ru/oth/HWFF/info/view.php
this link contains all stock firmwares - but they are all OTA and not Full package.
Click to expand...
Click to collapse

Path forward - Huawei Mediapad M3
asianpianoman said:
Yes, I continue to find your information very useful!
I have downloaded the Huawei Extractor and was able to use it to extract boot.img, fastboot.img, and recovery.img. However, this is for B003 and I am currently on B002. B002 does not appear to be available through the links you previously provided (neither OTA nor Full). Using B003 extracted files, what would be the proper sequence of flashing? Should I install the B003 boot.img first, hope that it boots into fastboot, and then flash B003 recovery.img in fastboot mode? How do I even go about installing B003 boot.img? Through SRK tools or adb? Or is this all too risky, and I should not even bother with B003 OTA files while I am still on B002?
Thanks again!
Click to expand...
Click to collapse
Yes it is very risky. Please proceed with caution or don't do it at all as these steps are risky and can turn your tablet into brick. I say this because we are not getting the right set of files to test properly. We don't have the rollback package or stock ROM so the situation is precarious. If anything goes wrong, it would only increase your problems. For going back to Stock all you need is Stock Recovery & Stock ROM and unroot.
You are in stock rom but rooted. You just need to flash the right recovery.img file using SRK tools. Please check my previous posts on how to run adb commands using SRK tools. You have to do this in bootloader mode. Fastboot or bootloader mode are one the same. You need only recovery.img and that should be flashed in fastboot or bootloader mode. Check the Russian site http://hwmt.ru/oth/HWFF/info/view.php this has B003 firmware
For the moment it appears like there is only one way forward if nothing else work for you. I hope you have seen the Greatslon ROM files in the other threads. You can download his EMUI 5.0 it looks gr8 and seems to be stable from what I read. He has uploaded all the required files for his ROM. Have a look and see if it interests you.
danibyte27 said:
Hi Sam!
unfortunately the custom rom I put 2 days ago hiddens the build numer (it says "B030 greatslon mod") but I annotated the previous one, which was the one you said "BTV-DL09C100B006".
Now I'm at work but this evening I'll try to do what you adviced. Thanks again and have a good day
Daniela
Click to expand...
Click to collapse
You and I have same tablet version. I bought my tablet on Amazon.de. Please make a note of your steps and how your tablet responded. Based on that we can see how to move forward. It will be really helpful to know your experience.
To both of you @danibyte27 and @asianpianoman
Please be careful while handling these .img files or any system files. Flashing wrong files or any mistakes or errors during flashing can be detrimental for your tablets. There is huge amount of risk. So please proceed with extreme caution. Do not proceed if you have doubts. Please do not hesitate to ask if you are in doubt.
It appears that Greatslon - Android Nougat ROM seems to be the best way forward. As you have seen FULL Rom is not available anywhere. So that complicates things. Going back to stock ROM seems to be very tricky for now until we get the right Stock ROM and other important files.
Please check all my posts. If you like my posts and find it useful. Please don't forget to press :good::good::good::good::good::good::good: for all my posts This will help me a lot and it is a kind of encouragement for my efforts. I appreciate your feedback.:good::good:
---------- Post added at 12:31 AM ---------- Previous post was at 12:26 AM ----------
danibyte27 said:
Hi Sam!!
I recovered my huawei unlock code and tried to relock the tablet, after having resetted it to factory (remember I still have custom rom).
After putting the tablet in bootloader mode and typing the following command on sk tools:
fastboot oem relock xxxxxxxxxxxxxxxxx (my unlock code)
I get:
....
FAILED (remote: stat not match)
finished. total time: 0.00 secs
I also tried "fastboot oem lock xxxxx" but it says "command not allowed".
Do you have ideas? I am blocked there...
Thanks!!
Daniela
Click to expand...
Click to collapse
Did you put the oem unlocking - ON & usb debugging on ?
1) check the bootloader - take a photo and see if it is showing phone locked or unlocked
hold volume down on your tablet for 3 seconds and then connect to computer
update : Can you check if your unlock code is correct?. it says "stat not matched" please check the unlock code.
risky steps
[[[try fastboot oem unlock xxxxxxx even if it says your phone is unlocked. ]]]
[[[then fastboot oem relock xxxxxxxx]]]
if this doesn't work
then flash the recovery of your current firmware using
use SRK tools - go to command prompt - type the below command ( this recovery.img should be in SRK folder )
fastboot flash recovery recovery.img
I would suggest you not to go back to stock. Please try to move forward to greatslon EMUI 5.0 ROM.
https://forum.xda-developers.com/mediapad-m3/development/twrp-greatslon-mod-t3489232
Please check this link https://androidfilehost.com/?w=files&flid=125388 he has uploaded all the files.

Hi Sam,
I think I'll follow your advice and don't try to install stock image until I find a clean and reliable solution
Could you please link me the address to download Greatslon nougat rom? I can only find 6.0 greatslon rom here:
https://www.androidfilehost.com/?w=files&flid=125388
Thanks!!
Dany

Not found
danibyte27 said:
Hi Sam,
I think I'll follow your advice and don't try to install stock image until I find a clean and reliable solution
Could you please link me the address to download Greatslon nougat rom? I can only find 6.0 greatslon rom here:
https://www.androidfilehost.com/?w=files&flid=125388
Thanks!!
Dany
Click to expand...
Click to collapse
It appears he didn't upload the EMUI 5 ROM for BTV-DL09C100 in that link.
However, he uploaded EMUI 5.0 on this Russian forum
http://4pda.ru/forum/index.php?showtopic=780572
But those seem to be for C233 and other versions.
So I think it is better to check with him on the other thread https://forum.xda-developers.com/mediapad-m3/development/twrp-greatslon-mod-t3489232 and see if it is ok to install C233 on C100. It is his work so I feel he is in best position to answer this question . :good::good::good::good::good:

Good news!!! Stock ROM link
danibyte27 said:
Hi Sam,
I think I'll follow your advice and don't try to install stock image until I find a clean and reliable solution
Could you please link me the address to download Greatslon nougat rom? I can only find 6.0 greatslon rom here:
https://www.androidfilehost.com/?w=files&flid=125388
Thanks!!
Dany
Click to expand...
Click to collapse
Hi,
Hope you remember me.
Finally I have some good news for you.
Some wonderful person found the link to download the Stock ROM & Rollback package in another thread.
here is the link
http://consumer.huawei.com/it/support/search/index.htm?keywords=btv-dl09&t=SupportSearch
Go to this link and download the Rollback package and then do the dload method. You will come back to Stock ROM and your bootloader will be locked again. Download both files. Site is in Italian, you can translate it to English. This is the file I was talking about in my previous posts. It was uploaded by Huawei only on March 30th.
This is straight from Huawei so no risk at all and very safe.
They also have the B009 firmware so you can use dload method again and update it to that firmware. After that you can do whatever you want
I hope this is useful for you.
Cheers!
Sam :good::good:

info
drooblz said:
Thank you for this! Been fighting trying to restore my tablet to default settings and apply the latest update. Sitting at B006 right now.
Click to expand...
Click to collapse
I am glad you found it useful. Please have a look at all my posts in other threads as well. I have explained the steps in detail.
There is Android nougat available too. B006 -> B009 -> B010 - > B301 - > this is the path you need to take to get to nougat if your tablet model is C100BXXX. And all these firmwares starting from B010 are available on firmware finder app.
https://play.google.com/store/apps/details?id=com.teammt.gmanrainy.huaweifirmwarefinder

How to unbrick my ZTE Axon 7 mini b2017g

Dear Seniors.
I am facing great hardship because my phone is stuck at boot logo.
No booting in recovery mode to flash another rom.
I did unlock bootloader of it by using tuliptool with success. After that i flashed custom rom in it. after reboot it is happening that.
Please suggest to recover it.

Did you flash twrp after unlocking? Did you make backup of stock ROM? Perhaps find a version of the factory firmware and flash that.

Dear I have no backup and i flashed TWRP recovery.......
It is to aware you that i did relock bootloader now my phone is working properly. but i am unable to enter recovery mode. !!!
Now my phone is running android 6.0.1 B02
But i am failed to root this rom uptill now due above mentioned problem.

modorate said:
Dear I have no backup and i flashed TWRP recovery.......
It is to aware you that i did relock bootloader now my phone is working properly. but i am unable to enter recovery mode. !!!
Now my phone is running android 6.0.1 B02
But i am failed to root this rom uptill now due above mentioned problem.
Click to expand...
Click to collapse
I found software update notification but when i update an error accruing while update. (This update not compatible with this device"
In easy words......... my recovery.img has been corrupted. I have no idea to get rid of this situation.

I planned to unlock my Mini's bootloader this weekend. After reading this post, I decided to act later until the root cause has been figured out.

bao_gg said:
I planned to unlock my Mini's bootloader this weekend. After reading this post, I decided to act later until the root cause has been figured out.
Click to expand...
Click to collapse
Several people myself included have been able to use tuliptool to successfully unlock and root the device.

mine is hard bricked too. but I think it is worse than the case listed on the op.
if you want to hard bricked these are the steps:
follow the procedure to install the Spanish ROM 6.1, than another android m b12, than finally the android seven......use tulip tool and install twpr fine, root ect. amazing ROM.......buuuuut......I lost my IMEI somewhere in this process, and the original FTM which had a small menu changes to another static one, without the menu.
I needed this menu to open the com port to fix the IMEI. than I had the brilliant idea to re-flash android M via twrp (without modifying the zip file to remove the recovery, something I knew so well from the older axon mini).
results:
-lost twpr because the stock ROM wrote over it,
-cannot boot the OS because I flashed android m but the phone had the aboot 7.
-i now have a brick
I need a genious to sujest something to bring it back to life........sh....t...sh...t.....sh...t
any chances I could inject aboot7 via ADB through my dead recovery which somehow the phone recognises? ADB shell still seems to be working
thanks