My Mom has an SM-G900FD > I think Russian because of the letters on the packaging and I recall the starting language to be russian or maybe Ukrainian.
My mom was taking pictures when suddenly the damn thing turned off and now stuck in bootloop.
I have tried flashing through ODIN the following firmwares and I cant get the damn thing to boot.
BOF1
ANJ1
BOE2
BOB2
BNL9
I dont have any information on the phone model other than what I mentioned earlier. I used Odin 3.10.7 and added the md5 file to the AP button. All of the firmwares I mentioned above resulted in bootloop. Any help/guidance would be truly appreciated. Am I flashing the correct firmware? Correct ODIN? Correct button in ODIN? (AP, CP, CSC, BL)??
Thanks a bundle
Model: G900FD
same here ... but here I have one g900fd with product code: g900wd (assuming wrong flash). After flashing via KIES sometimes hangs while playing samsung logo or hangs/crashes right after with black screen.
any help
guntherguerra6 said:
I dont have any information on the phone model other than what I mentioned earlier. I used Odin 3.10.7 and added the md5 file to the AP button. All of the firmwares I mentioned above resulted in bootloop. Any help/guidance would be truly appreciated. Am I flashing the correct firmware? Correct ODIN? Correct button in ODIN? (AP, CP, CSC, BL)??
Thanks a bundle
Click to expand...
Click to collapse
hbushi said:
Model: G900FD
same here ... but here I have one g900fd with product code: g900wd (assuming wrong flash). After flashing via KIES sometimes hangs while playing samsung logo or hangs/crashes right after with black screen.
any help
Click to expand...
Click to collapse
Install Smart Switch on a PC, and use the option Emergency software recovery and initialization.
Hi
i have Galaxy Grand dous G531H Stuck on logo
i tried with odin the official firmware From samsung and it's Success But Still stuck on logo
i tried the repair From this page
http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82
But with 3 BL , CP and CSC it Fail with me
and With AP it Give Wrong
Custom binary blocked by FRP
i tried with rooted ROM but it Fail
i try with kies but i Can't connect to it
Model : SM-G531h/DS
FCC ID: A3LSMG531H
SSN:-G531H/DSGSMH
any ideas
or
ROM it should try
roo7_shmali said:
Hi
i have Galaxy Grand dous G531H Stuck on logo
i tried with odin the official firmware From samsung and it's Success But Still stuck on logo
i tried the repair From this page
http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82
But with 3 BL , CP and CSC it Fail with me
and With AP it Give Wrong
Custom binary blocked by FRP
i tried with rooted ROM but it Fail
i try with kies but i Can't connect to it
Model : SM-G531h/DS
FCC ID: A3LSMG531H
SSN:-G531H/DSGSMH
Click to expand...
Click to collapse
Download this : https://mega.nz/#!IMFj0CAK!iVB3amQ1vesRuRpDwNHmc8zvUoL3nrPRXq1KanBdJJA
Unzip it
Put it in the AP (in Odin)
If fail then try use the included Odin in the stock ROM zip (but if you can access recovery, please factory reset first)
naimrlet said:
Download this : https://mega.nz/#!IMFj0CAK!iVB3amQ1vesRuRpDwNHmc8zvUoL3nrPRXq1KanBdJJA
Unzip it
Put it in the AP (in Odin)
If fail then try use the included Odin in the stock ROM zip (but if you can access recovery, please factory reset first)
Click to expand...
Click to collapse
it worked till last second gives me Fail
look at attach file
roo7_shmali said:
it worked till last second gives me Fail
look at attach file
Click to expand...
Click to collapse
Extract the stock tar.md5 file.(using winrar or 7zip)
You will see a lot of files with .img at the end of them.
Rename the file "hidden.img" to "hidden.img.tar"
Go to odin and choose AP and find the file "hidden.img.tar" (in the extracted tar.md5 folder)
Click START
After that your device will show the android logo and it will looks like it's updating.
Leave it. Your phone will reboot after that. (If not then turn the phone on manually)
^^
Before i read your reply i unzip the file and delete Hidden file and i repack to tar file with 7zip
and start with odin and it Give me pass
but when reboot still stuck on logo
after that i tried your way
give me pass but still stuck on logo
naimrlet said:
Extract the stock tar.md5 file.(using winrar or 7zip)
You will see a lot of files with .img at the end of them.
Rename the file "hidden.img" to "hidden.img.tar"
Go to odin and choose AP and find the file "hidden.img.tar" (in the extracted tar.md5 folder)
Click START
After that your device will show the android logo and it will looks like it's updating.
Leave it. Your phone will reboot after that. (If not then turn the phone on manually)
Click to expand...
Click to collapse
any new ideas plz
roo7_shmali said:
any new ideas plz
Click to expand...
Click to collapse
Try using smart switch/kies and then go to "firmware initialization..." and restore your phone there
If not detect click the "reinstall driver" and reconnect your device.
If still not detect maybe you mess up something on your phone...
Still not working?
After installing TWRP, following the instructions precisely - at least as far as I can recall - I somehow messed up my PIT (partition information table fwiw). I noticed that I couldn't access my SD-card while in the recovery and upon exiting TWRP I encountered a bootloop. I tried to reflash my phone with a stock ROM but got an error message stating that 'There is no PIT partition'. Lovely. After owning the majority of the Galaxy S series and flashing them to tears, I finally encountered this issue.
I was rooting my S8 to tinker with remapping the Bixby button the hard but right way, without work-arounds. Found a thread on the S8+ forums, here's the link.
Anyway, long story short: I need a new PIT file from someone with an Exynos 64GB model. It's pretty easy to extract but you do need to be rooted.
The required terminal command is:
Code:
dd if=/dev/block/mmcblk0 of=/sdcard/out.pit bs=8 count=580 skip=2176
It can be run on the device and through adb, superuser rights are required.
Would anyone be kind enough to help me out?
EDIT:
Welp, looks like I might be fine after all. There's a PIT file in the CSC-part of a stock ROM. Flashing stuff as we speak, will update. I feel stupid about not googling, I panicked because it's a brand new device and I assumed there wouldn't be any available. Goes to show how tricky assumptions are.`
EDIT 2:
Kill me now. I didn't read the instructions properly and forgot to hold the key-combo to enter recovery immediately after flashing TWRP.
I have the same problem but nothing works for me. I am unable to do anything with the phone at the moment. Please help me!
I can hopefully help..
TarekElsakka said:
I have the same problem but nothing works for me. I am unable to do anything with the phone at the moment. Please help me!
Click to expand...
Click to collapse
I've just overcome this issue with my S8 also however it took me over a day of research. This should hopefully help as for some reason my S8 doesn't like TWRP.
Firstly Download the BL file for AQG5 (google will reveal it).
Next, you should have your regions AP, BL, CSC and CP files to hand.
Open the CSC file with winzip or 7zip and extract just the .PIT file onto your desktop.
Now put your phone into download mode (power, bixby, volume down).
Open ODIN and connect your phone, in 'options' select 'repartition', then click the PIT tab and after the warning select the extracted PIT file that you placed on your desktop.
Also select the AQG5 BL file and ensure that this box is ticked.
Now in ODIN press start and it should repartition your phone. If it doesn't work for some reason (it didn't for me a couple of times) and gives the DEVICEINFO failure, you need to reenter download mode, and keep your fingers over those buttons (power, bixby, volume down). Now click start (it's a multi finger juggle proceedure) and keep hitting 'start' just as you've pressed the 'volume up' to go into download mode. For some reason the PIT will now be flashed and although you'll still have the boot screen you'll at least have the partition to be able to flash the rest of the software.
Finally, reset ODIN and restart, then select your regions Ap, BL, CSC and CP files, ensure that 'repartion isn't selected and click start.
Problem solved.. now try and find an alternative custom recovery because i can't find one.
Good luck.
Barry
holidayaddict1 said:
I've just overcome this issue with my S8 also however it took me over a day of research. This should hopefully help as for some reason my S8 doesn't like TWRP.
Firstly Download the BL file for AQG5 (google will reveal it).
Next, you should have your regions AP, BL, CSC and CP files to hand.
Open the CSC file with winzip or 7zip and extract just the .PIT file onto your desktop.
Now put your phone into download mode (power, bixby, volume down).
Open ODIN and connect your phone, in 'options' select 'repartition', then click the PIT tab and after the warning select the extracted PIT file that you placed on your desktop.
Also select the AQG5 BL file and ensure that this box is ticked.
Now in ODIN press start and it should repartition your phone. If it doesn't work for some reason (it didn't for me a couple of times) and gives the DEVICEINFO failure, you need to reenter download mode, and keep your fingers over those buttons (power, bixby, volume down). Now click start (it's a multi finger juggle proceedure) and keep hitting 'start' just as you've pressed the 'volume up' to go into download mode. For some reason the PIT will now be flashed and although you'll still have the boot screen you'll at least have the partition to be able to flash the rest of the software.
Finally, reset ODIN and restart, then select your regions Ap, BL, CSC and CP files, ensure that 'repartion isn't selected and click start.
Problem solved.. now try and find an alternative custom recovery because i can't find one.
Good luck.
Barry
Click to expand...
Click to collapse
I had the same issue as you, after making a multitude of mods to my phone (S8+) I ended up bricking it pretty good. It would not boot to recovery, like the recovery partition image was not there. I could only get it into download mode. After pissing with different versions of ODIN, I saw that it told me I had no PIT
I stumbled across your post and man o man, the amout of time and the way you have to finagle ODIN and the putting the phone in download mode sucks! You have like milliseconds to put the phone in download mode and start the flash via odin. Took me like 20 tries, but was finally able to flash the PIT file and the other AP, BL, CP, and CSC and finally, FINALLY got my phone back.
I will pay more attention to the mods I make, but at least I know I can recover from it.
Thanks Barry
i have a s8 with the same problem, but the pit way dosent work.
every flash ends in3 sec. with fail.
nighty said:
i have a s8 with the same problem, but the pit way dosent work.
every flash ends in3 sec. with fail.
Click to expand...
Click to collapse
Hi Nighty,
It does work...like I said in my post, you have to be lightening quick with putting the phone in download mode and hitting start in ODIN. Its almost like you have to hit start in ODIN a split second before ODIN shows the device as added. Its nerve racking and frustrating as hell, but it does work. I was using ODIN 3.12 if that helps. Not sure what version you use or what version Barry used.
Good luck and keep trying.
it works .. thx
I emailed TWRP about this issue as it's clearly not just my phone with the problem. They didn't reply.
Has anyone else found an alternative custom recovery for the S8 Exynos?
holidayaddict1 said:
I've just overcome this issue with my S8 also however it took me over a day of research. This should hopefully help as for some reason my S8 doesn't like TWRP.
Firstly Download the BL file for AQG5 (google will reveal it).
Next, you should have your regions AP, BL, CSC and CP files to hand.
Open the CSC file with winzip or 7zip and extract just the .PIT file onto your desktop.
Now put your phone into download mode (power, bixby, volume down).
Open ODIN and connect your phone, in 'options' select 'repartition', then click the PIT tab and after the warning select the extracted PIT file that you placed on your desktop.
Also select the AQG5 BL file and ensure that this box is ticked.
Now in ODIN press start and it should repartition your phone. If it doesn't work for some reason (it didn't for me a couple of times) and gives the DEVICEINFO failure, you need to reenter download mode, and keep your fingers over those buttons (power, bixby, volume down). Now click start (it's a multi finger juggle proceedure) and keep hitting 'start' just as you've pressed the 'volume up' to go into download mode. For some reason the PIT will now be flashed and although you'll still have the boot screen you'll at least have the partition to be able to flash the rest of the software.
Finally, reset ODIN and restart, then select your regions Ap, BL, CSC and CP files, ensure that 'repartion isn't selected and click start.
Problem solved.. now try and find an alternative custom recovery because i can't find one.
Good luck.
Barry
Click to expand...
Click to collapse
THANNK YOU SOOOO MUCH,I i had a recovery seandriod brick,and your method save me!!!
bricked my s8 with an attemt at TWRP flash, this perfect instruction unbricked it. Many kudo's!!! Saved me hundreds of $ can't thank you enough
sorry to resurrect an old thread, but would this method work with nand erase all with S8?
Hi.
Any chance someone can translate this into English?
"Firstly Download the BL file for AQG5 (google will reveal it).
Next, you should have your regions AP, BL, CSC and CP files to hand."
BL = Bootloop?
AQG5 = ???
AP = ??
BL = Bootloop?
CSC = Country Specific Code??
CP = ???
Have just bought a Galaxy SIII Mini GT-I8200 which I am trying to Root and/or install TWRP, with zero luck after 48 hours solid of trying various methods... ADB, ODIN, TWRP.apk etc. etc.
Have been using Linux Mint 20 but am gonna install Windows tomorrow as this is now beyond a joke. All I wanted to do was erase all the Google Nazi stuff.
ADB keeps coming back as unverified signature and ODIN is stuck on 'corrupted PIT file'.
So HOW does one resolve a fecked PIT file? when the instructions above are in a foreign language?
Any help will be greatly appreciated.
Two Tonne Tubbs said:
Hi.
Any chance someone can translate this into English?
"Firstly Download the BL file for AQG5 (google will reveal it).
Next, you should have your regions AP, BL, CSC and CP files to hand."
BL = Bootloop?
AQG5 = ???
AP = ??
BL = Bootloop?
CSC = Country Specific Code??
CP = ???
Have just bought a Galaxy SIII Mini GT-I8200 which I am trying to Root and/or install TWRP, with zero luck after 48 hours solid of trying various methods... ADB, ODIN, TWRP.apk etc. etc.
Have been using Linux Mint 20 but am gonna install Windows tomorrow as this is now beyond a joke. All I wanted to do was erase all the Google Nazi stuff.
ADB keeps coming back as unverified signature and ODIN is stuck on 'corrupted PIT file'.
So HOW does one resolve a fecked PIT file? when the instructions above are in a foreign language?
Any help will be greatly appreciated.
Click to expand...
Click to collapse
BL = Bootloader
AQG5 = Software version
AP = System firmware
CSC =Country specific code
CP= Modem
Flash your latest firmware first, with this pit file
Account Suspended
https://twrp.me/Devices/Samsung/ find the twrp version here and flash through odin.
Nice one.
I actually saw all the abbreviations in the Windoze version of Odin. They don't show in the Linux version.
Thank you
Hello everyone!
I have a Samsung SM-G935F which after a system update (a patch) is no longer working, it's stuck in boot loop.
When I turn it on I get: Kernel Rev check file Device 1, Binary 0.
I can get into the Download Mode and it will be recognized by ODIN.
But I don't know how to proceed in order to solve the presented scenario. Can you help me out? Thanks!
Regards,
Oliver
Hi, First you need to try to perform a format through recovery,holding power+home+volume up.
If phone did not boot,Then download firmware from sammobile using an app called SamFrim you can find it by simple search on google.
After you downloaded thr firmware,Launch odin and boot your phone into download mode by holding power+home+volume down.
Extract the firmware and it will generate 5 files
AP
BL
CP
CSC
Home_Csc
Add every file to its correct place in odin
AP
CP
BL
Csc( don't use Home_Csc,Because we want to perform a full wipe)
Then hit start, be careful not to unplug the cable,once it's done phone will auto reboot,leave it,It will do everything by its own.
Btw you must use latest odin version because older version doesn't support Oreo roms
Good Luck