Related
Okay , i dont know what really happened but.. I was running CM12 with custom kernel.. it were fine *for2days* , then there were some annoying bugs with the video and audio playbacks and also wifi.. Before i flashed cm12 i did twrp backup, so i restored it and when i rebooted to system.. the phone didnt seem to turn on. just a black screen and vibrating every 2 seconds. PC doesnt recognize it , i cant get to the boot logo , just vibrating.. I cant go in recovery neither download nor fastboot or anything else.. just vibrating every 2 seconds or less.
edit.. it stopped vibrating when i pulled out the battery for 10mins. now its doing nothing, just black screen. ill charge it for several hours and try again
smirnofz951 said:
edit.. it stopped vibrating when i pulled out the battery for 10mins. now its doing nothing, just black screen. ill charge it for several hours and try again
Click to expand...
Click to collapse
I think its not possible to revive your Lenovo A6000.
I too had a similar experience. The Motherboard of the phone may have have fried .
So I suggest you to visit the Lenovo Service Center & say that the phone doesn't turn ON after you updated to the new update version.
Say nothing about rooting or your custom ROM.
I hope you are still under warranty & they will probably repair it for Free. Also Enquire abt the charges if any.
Qualcomm Hs USB Qdloader 9008 (or 9006) mode
Hello friend your phone can be recovered. First, try doing this step by step:
I hope you are using Windows Os on PC
1. remove battery from your device (wait for atleast 5 seconds)
2. download Qualcomm Hs Usb drivers, install and resart your PC ( if you want help fetching drivers let me know I'm not allowed to post links here)
3. Open device manager form control panel
3. insert battery and connect the phone to your pc via USB ( I recommend USB 2.0 port) without pressing any buttons.
4. check if your device is detected and listed as qualcomm Hs USB qdloader 9008 (or 9006) in device manager under Ports
5. if showing your phone has life and it is recoverable for sure
6 if not showing repeat step 1 and 3 but, this time press and hold volume up + power button while connecting the phone to your computer
reply here and let me know if your device is showing as qdloader 9008 (or 9006) mode or not
Happy to help you
kartixda said:
Hello friend your phone can be recovered. First, try doing this step by step:
I hope you are using Windows Os on PC
1. remove battery from your device (wait for atleast 5 seconds)
2. download Qualcomm Hs Usb drivers, install and resart your PC ( if you want help fetching drivers let me know I'm not allowed to post links here)
3. Open device manager form control panel
3. insert battery and connect the phone to your pc via USB ( I recommend USB 2.0 port) without pressing any buttons.
4. check if your device is detected and listed as qualcomm Hs USB qdloader 9008 (or 9006) in device manager under Ports
5. if showing your phone has life and it is recoverable for sure
6 if not showing repeat step 1 and 3 but, this time press and hold volume up + power button while connecting the phone to your computer
reply here and let me know if your device is showing as qdloader 9008 (or 9006) mode or not
Happy to help you
Click to expand...
Click to collapse
I tried everything. But when i connect my phone to PC its just vibrating , its not recognized by pc.. Vibrating in different intervals, sometimes stops for a 5 - 10 seconds. I dont know what really happened to that phone. I just restored my twrp backup, rebooted and thats it... It cant be hardware issue.
averagegeek said:
I think its not possible to revive your Lenovo A6000.
I too had a similar experience. The Motherboard of the phone may have have fried .
So I suggest you to visit the Lenovo Service Center & say that the phone doesn't turn ON after you updated to the new update version.
Say nothing about rooting or your custom ROM.
I hope you are still under warranty & they will probably repair it for Free. Also Enquire abt the charges if any.
Click to expand...
Click to collapse
Yea i'm under warranty , ill go tomorrow and see what they will do.
Are u able to go into fastboot mode by pressing power + volume down .If yes then it is very easy to recover!
smirnofz951 said:
Yea i'm under warranty , ill go tomorrow and see what they will do.
Click to expand...
Click to collapse
Let me know what they said
Sent from my Lenovo A6000/Plus using Tapatalk
Sourav_8434 said:
Are u able to go into fastboot mode by pressing power + volume down .If yes then it is very easy to recover!
Click to expand...
Click to collapse
Its not going into fastboot mode. Just vibrating in intervals.
averagegeek said:
Let me know what they said
Sent from my Lenovo A6000/Plus using Tapatalk
Click to expand...
Click to collapse
So , i went to Lenovo's service center and as u said i told them that it happened after an OTA update. They told me that its software issue and will fix it soon. Can they understand that it have been rooted and flashed with custom ROM ? Before it died I flashed back the stock kitkat rom but the recovery is still twrp. And if so, will they charge me for that?
smirnofz951 said:
So , i went to Lenovo's service center and as u said i told them that it happened after an OTA update. They told me that its software issue and will fix it soon. Can they understand that it have been rooted and flashed with custom ROM ? Before it died I flashed back the stock kitkat rom but the recovery is still twrp. And if so, will they charge me for that?
Click to expand...
Click to collapse
I think they dont
Sourav_8434 said:
I think they dont
Click to expand...
Click to collapse
Thanks for supporting, ill let you guys know if something happen.
smirnofz951 said:
So , i went to Lenovo's service center and as u said i told them that it happened after an OTA update. They told me that its software issue and will fix it soon. Can they understand that it have been rooted and flashed with custom ROM ? Before it died I flashed back the stock kitkat rom but the recovery is still twrp. And if so, will they charge me for that?
Click to expand...
Click to collapse
I hope they don't. Probably they will replace the Motherboard .
I also had the same issue as yours. I told the same as you did & they haven't charged for me.
I expect that even if they found out ,they will probably ignore it
its recognizd what i should donow
Okay , the phone came back. For first 3 days it was in Sofia,Bulgaria and they didn't found out why its not booting. Then, they texted me that the phone is shipped to India ( i dont really know why ). 10 days later the phone arrived here with changed motherboard. They did not charged me and my warranty is still alive. I'm fully sure that its software issue , really don't know whats the point of changing mobo. Anyway , thanks for supporting.
Lol lol lol just booted in recovery and its still twrp .. how its possible when they said its changed mobo
Help ME!! Bricked my Lenovo A6000 plus
kartixda said:
Hello friend your phone can be recovered. First, try doing this step by step:
I hope you are using Windows Os on PC
1. remove battery from your device (wait for atleast 5 seconds)
2. download Qualcomm Hs Usb drivers, install and resart your PC ( if you want help fetching drivers let me know I'm not allowed to post links here)
3. Open device manager form control panel
3. insert battery and connect the phone to your pc via USB ( I recommend USB 2.0 port) without pressing any buttons.
4. check if your device is detected and listed as qualcomm Hs USB qdloader 9008 (or 9006) in device manager under Ports
5. if showing your phone has life and it is recoverable for sure
6 if not showing repeat step 1 and 3 but, this time press and hold volume up + power button while connecting the phone to your computer
reply here and let me know if your device is showing as qdloader 9008 (or 9006) mode or not
Happy to help you
Click to expand...
Click to collapse
I too have the same problem.The device is completely gone black but responds to power button.My PC detects Qualcomm Usb drivers 9008 .I tried flashing the stock rom but it is taking sooo long and does not finish flashing.{I even kept it overnight to flash}.Please help me recover my phone.
PLease Help
Hello,
I tried flashing the stock rom of a6000+ using twrp but after that my phone got bricked.
i am not able to boot in recovery mode. My device is not getting recognized in adb.
in the device manager section it show TP-Link Android Device->Android Bootloader Interface.
Please Help Me Unbrick My Phone.
the phone just restarts itself even if it is connected to computer.
email:[email protected]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
kartixda said:
Qualcomm Hs USB Qdloader 9008 (or 9006) mode
Hello friend your phone can be recovered. First, try doing this step by step:
I hope you are using Windows Os on PC
1. remove battery from your device (wait for atleast 5 seconds)
2. download Qualcomm Hs Usb drivers, install and resart your PC ( if you want help fetching drivers let me know I'm not allowed to post links here)
3. Open device manager form control panel
3. insert battery and connect the phone to your pc via USB ( I recommend USB 2.0 port) without pressing any buttons.
4. check if your device is detected and listed as qualcomm Hs USB qdloader 9008 (or 9006) in device manager under Ports
5. if showing your phone has life and it is recoverable for sure
6 if not showing repeat step 1 and 3 but, this time press and hold volume up + power button while connecting the phone to your computer
reply here and let me know if your device is showing as qdloader 9008 (or 9006) mode or not
Happy to help you
Click to expand...
Click to collapse
hello, I have a bricked A6000, maybe you can help...
now it is shown as qualcomm Hs USB qdloader 9008 in device manager. what should i do next?
I Use Flashfire App And Install N9005XXUGBOB6 Wrong Firmware After Install Firmware My Device Hard brick No Downloade Mode And No Recovery Mode No Power Up My Device Connect Pc Show HS USB QDLOADER 9008 Plz Help How To Recover My Device
GALAXY 12345 said:
I Use Flashfire App And Install N9005XXUGBOB6 Wrong Firmware After Install Firmware My Device Hard brick No Downloade Mode And No Recovery Mode No Power Up My Device Connect Pc Show HS USB QDLOADER 9008 Plz Help How To Recover My Device
Click to expand...
Click to collapse
The N9005 is an Exynos SOC chip. The VZW Note3 (SM-N900V) uses a completely different SOC - a Qualcomm 8974.
What you did got a similar result as to what you might expect if you flashed the firmware from a digital camera - or a vacuum cleaner - on to your phone. 100% certainty of disaster.
Take it in to a Verizon store and see if they can do anything. Don't explain anything at all about what you did; just say "I don't know what happened - it won't boot up, but something still happens when I connect it to a PC". Try to be very nice. Maybe even so nice that you (carefully) offer a bribe if you manage to talk to a tech.
Do this even if you are not a Verizon customer. The worst they can do is tell you "No, GTFO".
Desperate times call for desperate measures, and you are in a desperate situation.
PS: please report back as to what the outcome is.
.
Recover My Device with Jtag????
Yesterday when I updating my Asus zenfone max Z010D my phone hard brick. Nothing show, not indicating led, not charging, not going to bootloader.not going to recovery. The main thing is that I download ota updates zip from Asus website and flash from stock recovery. When I connect zenfone max to PC, in device manager show qualcomm hs-usb qdloader 9008 driver. And when I google, then I known that I need service ROM which can flashed through Qfil tool.
So, can you give me service ROM so that I fixed this problem.
Please not this is not battery problem. Its os problem. Sorry for my bad English and thanks.
sorry
im not an expert but im using zenphone max sd615 model so i just try to install custom rom on my device i just switch off my device through twrp and its turn off for ever not turning on not charging no led indicates nothing
Christy2375 said:
im not an expert but im using zenphone max sd615 model so i just try to install custom rom on my device i just switch off my device through twrp and its turn off for ever not turning on not charging no led indicates nothing
Click to expand...
Click to collapse
That is the offline charging bug caused by the hardware's reverse charging feature. No solution to date so be careful to not let the battery go below 20% without charging.
Reboot into Fastboot / CSC mode ( vol up + power) and plug the charger. Let it charge for 10-15 mins then reboot.
sir please help me i have already a reverse charging popup problem i try to change the os to solve the bug please any other option
Hello, I had a very little progress. I gave up about my asus zenfone max a year ago but glad that now looks like there's a hope in reviving my phone. I was able to download the right files to flash with QFIL. Most people here say that their PC detected QUALCOMM HS-USB QDLOADER 9008 but mine detect it as QUALCOMM HS-USB DIAGNOSTICS 9006. Due to excitement, I flashed it anyway and it created some memory partition on my hard drive whenever I plug the phone but QFIL gave me an error of :
** Download Fail: Switch To EDL Fail Failed to switch to Emergency Download Mode
I tried to google this error, some encountered it and was able to get a resolution by just removing the battery before plugging it in but our zenfone is with non removable battery. I have no luck yet. Anyone got suggestions ?
MJMarra34 said:
Hello, I had a very little progress. I gave up about my asus zenfone max a year ago but glad that now looks like there's a hope in reviving my phone. I was able to download the right files to flash with QFIL. Most people here say that their PC detected QUALCOMM HS-USB QDLOADER 9008 but mine detect it as QUALCOMM HS-USB DIAGNOSTICS 9006. Due to excitement, I flashed it anyway and it created some memory partition on my hard drive whenever I plug the phone but QFIL gave me an error of :
** Download Fail: Switch To EDL Fail Failed to switch to Emergency Download Mode
I tried to google this error, some encountered it and was able to get a resolution by just removing the battery before plugging it in but our zenfone is with non removable battery. I have no luck yet. Anyone got suggestions ?
Click to expand...
Click to collapse
Where do you get the right files? Could you post them?
Hi guys, I'm in really trouble.
I've got an Asus z010d and I think is hardbricked.
Screen is totally black, no vibrations, no recovery mode, nothing.
The only thing that I've done is to see it via QFIL like the image attached.
I've read some guides around the internet, for restore the device via QFIL with a stock rom, but I not able to get a single rom that has rawprogram0.xml and patch0.xml files that the program need...
I state that I am not a big expert.
Iif anyone knows how to help me, I can also pay him for the right assistance.
Thanks in advance.
After installing all the drivers and the flash tool the most important step is to boot the phone into edl mode or 9008 port which is very tricky step
STEPS:-
1. Power off the phone completely.
2. Press the volume up button for almost 15 sec without leaving press the power button for .5 sec (don't leave the volume button).
3. Again press the power button and hold it and immediately put the cable into the pc .
(note:- these time two buttons are pressed power button and the volume up button which was pressed in step two)
4. Leave both buttons when you receive the connection sound on the pc and check in the device manager now you connected to
the 9008 port instead of the 900E port.
(note:- step 4 can be symbolizes as you will get zuk logo flashed for a split of second after connecting the cable to the pc and
after that whole screen will be black and then after leave all the buttons and flash the phone with qpst)
refference:-http://forums.easy-firmware.com/showthread.php?97902-Lenovo-ZUK-Z2-Plus-EDL-Mode-And-Flashing-Process
how to turn off the phone completely while this phone hard bricked? im a noob, sorry
Aldhryy said:
how to turn off the phone completely while this phone hard bricked? im a noob, sorry
Click to expand...
Click to collapse
Press the power button for long time about 15-20sec until notification led gose off
Additional, some bricked devices may stuck in 900E mode, just keep on pressing in power botton and your device will reboot(screen may still be black, u must stare at the display of mode of your QFIL tool) .After rebooting some times(8∽9 times normally), your device will force boot into 9008 mode (you have to release the botton in a very short time or retry above lol) .
This method isnt from me and just tested on my phone succeefull .Hope helpful to someone.
Zuk Z2 Pro Stuck in EDL HS-USB 9008 Port and automatically connecting and disconnect
Hi,
My Zuk Z2 Pro is stuck in EDL 9008 Port. Phone is totally bricked and no sound, no light, no vibration. When i connect with the computer, phone is connecting on HS USB 9008 port and get disconnected after 20-22 seconds and again automatically connected with in half second time.
I am facing this issue after flashing a ZUI 1.9 by using a QPAST/QFIL application. I think i have made stupid mistake by flashing a phone with "ERASE ALL BEFORE DOWNLOAD" option.
I have tried every scenario to get stable this 9008 port but no luck. Since last 5 days i am studying forums and applying every kind of solution but same result.
I am writing this post with high expectations and hope someone will take notice and help me to get rid of this problem.
I can pay through paypal if someone wants to provide professional services to resolve this matter
I will appreciate if someone have any idea and can help me. Thanks
Farazk said:
Hi,
My Zuk Z2 Pro is stuck in EDL 9008 Port. Phone is totally bricked and no sound, no light, no vibration. When i connect with the computer, phone is connecting on HS USB 9008 port and get disconnected after 20-22 seconds and again automatically connected with in half second time.
I am facing this issue after flashing a ZUI 1.9 by using a QPAST/QFIL application. I think i have made stupid mistake by flashing a phone with "ERASE ALL BEFORE DOWNLOAD" option.
I have tried every scenario to get stable this 9008 port but no luck. Since last 5 days i am studying forums and applying every kind of solution but same result.
I am writing this post with high expectations and hope someone will take notice and help me to get rid of this problem.
I can pay through paypal if someone wants to provide professional services to resolve this matter
I will appreciate if someone have any idea and can help me. Thanks
Click to expand...
Click to collapse
1. Try uninstalling all the drivers you installed.
2.switch of your phone compeletly.
3.follow the link.
https://www.google.co.in/amp/s/foru...ecover-hard-bricked-zuk-z2-plus-t3576007/amp/
Solved: Zuk Z2 Pro Stuck in EDL 9008 mode and port auto connecting/disconnecting
[email protected] said:
1. Try uninstalling all the drivers you installed.
2.switch of your phone compeletly.
3.follow the link.
https://www.google.co.in/amp/s/foru...ecover-hard-bricked-zuk-z2-plus-t3576007/amp/
Click to expand...
Click to collapse
The Problem is resolved. I charged my battery 7-8 Hours and flashing done at first attempt. My phone was stuck in EDL mode and Port 9008 was continues connecting /disconnecting and i was not able to complete a flashing process. Flashing by using Qfil really sucked a battery. So if someone face such kind of issue, please charge your battery for 7-8 Hours and then try flashing.
Aldhryy said:
how to turn off the phone completely while this phone hard bricked? im a noob, sorry
Click to expand...
Click to collapse
The phone turns off completely when there's nothing on-screen (no error), notification, and no vibration
Hey
So I was flashing android 7.0 to an S8 and it completely died, this is how completely:
- No screen/LED/vibration motor
- No safety/recovery/download mode (and don't ask about button combos, I've tried them all)
- No USB recognition from device manager (not even as exynos in other devices, just nothing)
- USB jig does nothing
- It is however recognised by wireless chargers (but I doubt that has any real significance)
At this point my question is would a JTAG even work on it? Or is my only hope a complete motherboard replacement?
S8 Hard bricked
A_Bad_Marksman said:
Hey
So I was flashing android 7.0 to an S8 and it completely died, this is how completely:
- No screen/LED/vibration motor
- No safety/recovery/download mode (and don't ask about button combos, I've tried them all)
- No USB recognition from device manager (not even as exynos in other devices, just nothing)
- USB jig does nothing
- It is however recognised by wireless chargers (but I doubt that has any real significance)
At this point my question is would a JTAG even work on it? Or is my only hope a complete motherboard replacement?
Click to expand...
Click to collapse
hello!
same happened to me ......dont worry i will help u....
i think u flashed aosp rom
phone is not hard bricked its still not turned off believe me........
do the following:
donot charge phone for atlesat 24 hours .......
after 24 hours try to boot into download mode press button for like a minute it will work in multiple tries,,
immediately flash twrp and when flashed successfully suddenly press vol down + bixby + power it will boot into recovery
charge for 1 -2 hours , clear system and every thing if you have backup thats good other wise flash firmware......donot turn in till flashing the system and data in recovery mood......boot into download mood from recovery and there you go....if still a problem inbox me
Thanks, I'll give it a shot
ok let me know then
Jtag dead phone to life and rewrite IMEI
I had the same thing, sent it to Fonefunshop in England, they said they could fix it, the didn't even open it as discovered by the guys who fixed it and is necessary to use jtag.
Fonefunshop said eMMC chip was bad, which is not true, but that led me to search for someone to replace the chip. I found A2Z cellular in Ottawa, Canada. They got the phone to boot up, but IMMEI was null( I did this trying to flash back to stock after TWRP screwed up). They rewrote original IMEI , now phone works like new. These guys are amazing.
http://a2zcellular.com/
Thank you all for the advice.
But I have now managed to unbrick and reflash the firmware. khawarjaved's advice turned out to be what fixed it in the end.
That was close, nearly lost £30
A_Bad_Marksman said:
Thank you all for the advice.
But I have now managed to unbrick and reflash the firmware. khawarjaved's advice turned out to be what fixed it in the end.
That was close, nearly lost £30
Click to expand...
Click to collapse
I have been through that situation man.... So always ready to help, ??
Hi pros
I'm in kind of a similar situation....I think I flashed MY 950U PIE with wrong BL
This phone is dead....Doesn't boot...no download mode....No recovery mode....
When connected to pc....device manager Recognises device as QUALCOMM HS USB 9008
Any way to brig it back to life...?
Your phone is connected in edl download mod. It will accept special files which will allow it to boot to download mode and let you flash stock firmware
The tool used for this is emmcdl.exe
It has to come with phone specific files
No idea where to get it. Ask people here, those who root phones. They know.