MIUI Official V11.0.3.0 Global Download and Install (fastboot and update)

MIUI Official V11.0.3.0 Global Download and Install (fastboot and update) - Xiaomi Mi 6 Guides, News, & Discussion

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Method 1: Local Update
Note
You can upgrade your phone by Local Update method without unlocking your phone. The method suits for the situations listed below for sure:
Update to Global Stable ROM from Global Stable ROM, Update to Global Beta ROM from Global Beta ROM, Update to Global Beta ROM from Global Stable ROM and vice versa.
If you encounter the issue that the reboot page keep loading for a long time after flashing, you can choose to wipe all data via entering Recovery Mode.
You can turn off your device and then hold both Volume+ button and Power button at the same time to enter Recovery Mode.
STEP 1
Download the latest MIUI V11.0.3.0.PCAMIXM ROM file Click here to download
There is no need to do it again if you’ve already downloaded the latest ROM file.
STEP 2
Connect your device to the Windows PC/laptop via a micro USB cable, and copy the ROM file downloaded in Step 1 into the folder ‘downloaded_rom’ in the internal storage of your device.
STEP 3
Launch ‘Settings’ app on your device, select ‘About phone’, click ‘System update’, then press ‘three dots’ icon at the top-right corner, and select ‘choose update package’ to enter.
Choose the ROM file you’ve put in ‘downloaded_rom’ in Step 2.
STEP 4
After choosing the right ROM file, your device will begin upgrading.
Your device should automatically boot to the new version when the update is completed.
Method 2: Fastboot Update
This method requires the unlocked bootloader.
In mi6 there is no waiting time to unlock the boot(STEP 1), at least on my device.
Note
A Windows PC/laptop will be needed for the following steps. Make sure that your device is fully charged or has enough power for this process.
This guide will help you update your device to the latest MIUI ROM version.
All user data will be purged in this process. Please back up your data and think twice before proceeding.
STEP 1
Download MIUI ROM Flashing Tool (Size: 46 MB).
Devices marked with locked. If your device is locked, please click here to unlock it first.
If your device is unlocked, please just follow the following tutorial to complete the ROM flashing.
STEP 2
Select the right MIUI ROM version for your phone from the listed below, and download the corresponding package file.
Xiaomi Mi 6 Latest MIUI Official V11.0.3.0 Fastboot File Download
STEP 3
Turn off the device. Press the Volume– key and the Power button at the same time to enter Fastboot mode. Then connect the device to the Windows PC/laptop via a micro USB cable
STEP 4
Double click on the downloaded ROM file to decompress it.
Open the file folder for the decompressed ROM pack, and copy its path on the computer.
STEP 5
Decompress the MIUI ROM flashing tool downloaded in Step 1, and double click on it to install (if there is security warning, select 'Run').
After installation is completed, open MiFlash.exe and paste into the address bar the ROM file folder path copied in the last step.
Click on the first button (circled out in yellow) to Refresh, and MiFlash should automatically recognize the device.
Then click the second button (circled out in red) to flash the ROM file to the device.
STEP 6
Wait until the progress bar inside MiFlash turns fully green, which means the ROM has been successfully installed. Then your device should automatically boot to the new version.
If the flashing guide could not help you, please download Mi PC Suite here
(After Mi PC Suite is installed, make sure that your phone is in fastboot mode, connect your phone to a computer, and select the correct ROM file to flash)
Hope it helps the newbies, thanks.
Credits for Xiaomi Mi Community

This version works on redmi k20 mobile
This version works on redmi k20 mobile

Related

Installation TWRP + [AUTOMATED SCRIPT]

EDIT: Glad you got it straightened out.
He explained this isn't to compete with @bhb27 efforts, but to be able to flash TWRP without typing in fastboot commands. It's to make it easier to use TWRP. It's not a redundant thread, like it looked at first glance.

Dup thread closed, see link to original thread above
UPDATE: thread open Feb 6th
After communicating with the OP, he has explained this is more of a tool to be used while installing recovery. This explanation will be added to the OP for clarity.

Hello everyone, Explaining what I want to pass on to you.
The TWRP file developed by the site:
https://twrp.me
The same as teaching how to install:
[RECOVERY][OFFICIAL TWRP 3.1.1][For all Quark][Moto Maxx/Turbo and Droid Turbo]
https://forum.xda-developers.com/mot...overy-t3180308
[TOOLS][All quark] MultiROM_TWRP [TWRP 3.1.1_Mod_3][MR 35][20171111]
https://forum.xda-developers.com/mot...mtwrp-t3658605
Using the command
* mfastboot flash recovery TWRP 3.2.1-0.img
Click to expand...
Click to collapse
So to make it easier I created a script that does this for you, every new version they launch I'll be creating the installation script

[Guide][STOCK] How download latest fastboot firmware with Lenovo Moto Smart Assistant

This guide show you how to download latest fastboot images from your device from the official servers, using the Lenovo Moto Smart Assistant software.
If you find mistakes or you do not understand sentences, tell me.
Lenovo Moto Smart Assistant (LMSA) allow you to perform various actions on your phone, such as installing the latest update of the manufacturer, perform backups / restores, manage files stored on the phone... But I recommend to do this actions only if your phone runs the official stock ROM.
Another nice feature of LMSA is that you can download and reinstall the official ROM in case of system corruption. To do this, the software downloads the ROM in fastboot version : then you can take it.
Requirements
- Be able to start your phone in fastboot mode.
- Have the phone's USB port functional + a functional USB cable.
- Have a computer running on Windows 7 - 10 (later version need test, if ok let me know)
- Have internet on your computer
Method
0) Download and install if this is not done yet the USB drivers for Moto G5 fastboot mode (https://support.motorola.com/in/en/drivers)
1) Download and install LMSA from Lenovo's website (https://support.lenovo.com/pl/en/downloads/DS101291)
2) Launch LMSA, click on the "Flash" menu at the top left of the window, and click on "Go Rescue" at the bottom right.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3) Then you will have to select your phone. For the Moto G5, select first at the top "Moto Phone", then below "Moto G5", and then the model of your phone. If you do not know it, watch step 4a. Otherwise, when you plug your phone into fastboot mode, LMSA "should" automatically find the model, but it's safer to choose it manually "just in case".
4) Start/restart your phone in fastboot mode. For the Moto G5, press the start button and at the same time keep pressing the "volume minus" button until you reach the fastboot. If your phone boots to your ROM, repeat this step.
4a) To know the model of your phone, look at the line "Product / Variant" on the fastboot screen, just after "cedric" there should be the model version (XT1670, XT1671, XT1672, XT1675, XT1676 or XT1677).
5) Connect the phone. LMSA should propose you the latest fastboot image available: Just click on the icon next to the image, on the right, to download it.
6) Once the download is complete, a folder containing all the files of the fastboot image is available in the folder :
C:\ProgramData\LMSA\Download\RomFiles (default folder)
Et voilà!
If something wrong
1) Repeat the steps meticulously
2) Be sure to connect the phone only at the end and in fastboot mode
3) Verify that the Motorola USB drivers are correctly installed. To do this, go to the device manager (Press the Windows + R key, write "devmgmt.msc" and press OK). If your screen looks like the first image, the drivers are properly installed.
If your screen looks like the second image, you will need to reinstall the drivers and/or restart your computer.
1) Restart the computer after installing the drivers and LMSA. I already had bug with LMSA that were resolved after a reboot.
1) If it still does not work, please indicate it in the thread. To help you as well as possible, please provide as much information as possible: the version of Windows, the model of your phone, is it root / unblocked, do you use the ROM stock or not, the ROM name...
Note
LMSA automatically decompresses the fastboot image, so if you want to share the image on the internet, it is recommended to re-zip all the files (with 7-Zip for example).
License
Creative Commons Attribution 4.0 International (CC BY 4.0) https://creativecommons.org/licenses/by/4.0/.
You are free and encouraged to use, share, adapt this guide. Just do not forget to indicate that I am the author (thank you! :good.

i cannot download the firmware
it says " Device is not supported" although i have a moto g5 XT 1677

Duplicate message

[email protected] said:
it says " Device is not supported" although i have a moto g5 XT 1677
Click to expand...
Click to collapse
Looks like the application bug, have you tried restarting your computer after installing drivers for fastboot and LMSA? Then, rerun all the procedures and plug your phone into fastboot mode only at the end

it says " Device is not supported" although i have a moto g5 XT 1676 Whit unlock bootloader

LMSA is, IMHO, just a pile of junk. It never detects my phone in the Flash/Upgrade sessions. Apart of that the backup function doesn't work, file manager can only copy files (not folders) and only one at a time afaik.
fastboot and adb alone seemed far more usable to me.

[HOWTO] Flash a Stock ZUI ROM (ZUK Z2 Pro Z2121 only!)

Flash guide ZUK Z2 Pro - （Z2121）(QPST/QFIL):
-------------
Preamble:
This upgrade your Phone to Z2 Pro_CN_OPEN_USER_Q01002.1_M_ZUI_1.9.038_ST_160503 version, for example. Use the latest version of the software or the version for the actual operation.
Backup your data before processing the flash, in order to avoid loss of data!
-------------
###################
This tutorial is for all editions of ZUK Z2 Pro (Z2121).
USB flashing will wipe your internal phone storage!
Flash at your own risk, and alway follow the flashing turtorial.
Please note this tutorial is different than ZUK Z2 (non Pro) flashing tutorial!
###################
--You'll need a USB-C data-cable to proceed--
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
###################
Theoretical it is possible to recover a bricked Qualcomm Phone, just like ZUK Z2 Pro via this method. If you do this for the first time you'll need to download some tools.
With downloading and installing the tools this procedure will take about 10-30 minutes (differs depending on how powerful your computer is)
Without downloading and installing the tools this procedure will take about 5 minutes.
###################
Let's get startet!
1.0 Download flashtool and ZUK USB driver
Download Flashtool
###REQUIRED### (QPST 2.7.434)
https://www.androidfilehost.com/?fid=24591000424948456
Download USB Drivers
###REQUIRED### (ZUK)
https://www.androidfilehost.com/?fid=24659325368664618
optional (Qualcomm normally installed by QPST flashtool setup)
https://www.androidfilehost.com/?fid=24591020540824824
Download and extract ADB and fastboot
###REQUIRED###
https://www.androidfilehost.com/?fid=24671318762848778
**Attention**
Click to expand...
Click to collapse
If you have Windows 8, 8.1, 10 installed, you have to disable driver verification.
This tutorial was tested by myself on Windows 10 Pro 64 Bit (Build 1607)
Click to expand...
Click to collapse
Download Stock ROM
###REQUIRED###
https://www.androidfilehost.com/?w=files&flid=94059
1.0.1 Unzip the downloaded package
1.0.2 Install QPST.2.7.434.msi
Note: If this screen appears when you double-click on the upgrade tool, you need to download and install the Microsoft .NET Framework 4, you can directly search for and download dotNetFx40_Full_x86.rar
###################
To prevent any further trouble, please reboot your computer now!
###################
1.1.1 Click "QFIL" open the upgrade tool; (path: Start Menu - All Programs - QPST - QFIL)
1.1.2 If you opend QFIL switch to the FireHoseConfiguration and enter the following settings:
After saving the settings, restart QFIL.
1.1.3 Click "Load Content" button, and navigate to the folder you extracted the ROM you downloaded and navigate to the folder with the contents.xml located in, select the contents.xml and click open. This should be looking like this:
The QFIL tool will automaticly load all needed files.
1.1.4 If your phone isn't bricked(Method 1):
Plug in your phone via USB-C cable to your Computer. After this you need to enable developer options. Navigate to Settings - About - ZUI Version and touch it 7 times to enable developer options. After this was successfully navigate to Settings - Advanved Settings - Developer Options - USB debugging and turn it on. Confirm dialog with OK.
Now you only have to navigate to the ADB and fastboot files you extracted and open a command prompt (press and hold "shift" rightclick - select "open command promt windows here")
Type into it: adb reboot edl
---If it fails, turn on "enable_usb_2.0" via Developer Options---
If your phone is bricked (Method 2):
(Turn off your phone.) After it's fully shutdown, press and hold the volume down button and connect your phone to your PC.
Now the QFIL tool should react with the following:
1.1.5 Press the Download Content button to proceed the flashing.
1.1.6 If the flashing procedure was successful, this will be promped
THAT'S IT
1.2.1 Flash finished boot test
After the software upgrade is complete, you should do some test, to confirm whether the software download was successful. Test steps are as follows:
1.2.2. start testing:
After the upgrade the phone should be able to boot.
1.2.3 query software version:
Enter * # * # 5993 # * # * to view the phone software version, phone software version for the software version of the new download.
1.2.4 query the phone number and the IMEI number:
Enter * # * # 2222 # * # * # * 06 # and check the serial number and IMEI number, and backing this time should be consistent.
Last, but not least do OTA updates if available.
###################
Sources:
Original Thread and source: http://club.lenovo.com.cn/thread-1811698-1-1.html
ROM Source: http://club.lenovo.com.cn/thread-1812430-1-1.html
Thread preserved from beeing deleted from zukfans.eu as it will close its doors soon.

does it work with an unlocked rooted zuk z2 pro with rom RRO 6.1.0 ?

Old thread, but I´ll try anyway.... my phone isn´t bricked, but I cannot get into it since my son forgot his screen password... When I turn off the phone, hold vol- and connect the phone, the phone powers into bootloader menu and it is not recognized by QFIL. Any ideas how to solve?

Use this to get your phone into EDL if phone is bricked
My phone was bricked. To get it to connect via the correct port i followed this video tutorial using aluminum foil - and it worked! using ZUK Z2_plus - but it may also work with PRO.
I couldn't get any of the key combos to work - and due to the brick state also couldn't use any of the ADB or fastboot commands.
Connect your phone to your PC in EDL mode:
Youtube Video: v=DexLELi04XY
Title: EDL MODE Lenovo Z2 | Lenovo z2132
(sorry, can't post link)

Hello, I'm trying to flash a rom on my Zuk Z2 Pro but it doesn't work.
At the 1.1.4 step (method 2) I just have "No port available" on QFIL, I don't know why.
Can anybody help me pls ?

ZTE Blade A0622 Unlock Bootloader

OEM Unlock Bootloader & Install TWRP for ZTE Blade A0622 voyage
Important! Be sure to perform the first step, in order to avoid problems in the future.
Step 1 - Enable OEM unlock and USB debugging
Go to Settings > About phone.
Click 7 time on Build number.
Going to Advanced settings, tape on Developer options.
Enable OEM Unlocking and USB debugging.
Step 2 - Download files, reboot phone in EDL mode, flash aboot
Download rar archive https://tinyurl.com/y43wbvgo
Unpack archive in any folder
Press on [0] Reboot to EDL.bat , and we go to EDL (9008)
Now we need to find out the COM port, go My Computer -
properties - device manager - Ports (COM & LPT). Remember this number.
Click on [1] Flash Aboot.bat (Right button mouse) - Rename, and change COM port to your number.
After save text file and run him.
Turn on your smartphone, you can go to recovery (Vol.Up+Power).
Now can see chinese engineering menu, press on next file [2] OEM Unlock.bat . After completing the unlock process phone reboot and we need reboot again in recovery mode (Vol.Up+Power).
Now re-entered the Chinese engineering menu, use last bat file
[3] Final Flash.bat . Upon completion, we will see TWRP. After completing step 3, your phone is unlocked!
Step 3 TWRP
Swipe on bottom bar (Do not click on read only). Download chinese rom https://tinyurl.com/yygsrs7e , and intall him. Now you can get root, use magisk v16.0 or magisk v.16.7 (not higher). For the version above, you need a custom kernel, not a stock.

hai, help me
step 2 ; find out the com port
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
rename to top or bottom

https://ibb. co/Vg34XTq

Hi man,step 2 on flash aboot bat is it rename on file or something else? Rename became what if my device is COM23
---------- Post added at 11:40 PM ---------- Previous post was at 11:16 PM ----------
lyoks said:
OEM Unlock Bootloader & Install TWRP for ZTE Blade A0622 voyage
Important! Be sure to perform the first step, in order to avoid problems in the future.
Step 1 - Enable OEM unlock and USB debugging
Go to Settings > About phone.
Click 7 time on Build number.
Going to Advanced settings, tape on Developer options.
Enable OEM Unlocking and USB debugging.
Step 2 - Download files, reboot phone in EDL mode, flash aboot
Download rar archive https://tinyurl.com/y43wbvgo
Unpack archive in any folder
Press on [0] Reboot to EDL.bat , and we go to EDL (9008)
Now we need to find out the COM port, go My Computer -
properties - device manager - Ports (COM & LPT). Remember this number.
Click on [1] Flash Aboot.bat (Right button mouse) - Rename, and change COM port to your number.
After save text file and run him.
Turn on your smartphone, you can go to recovery (Vol.Up+Power).
Now can see chinese engineering menu, press on next file [2] OEM Unlock.bat . After completing the unlock process phone reboot and we need reboot again in recovery mode (Vol.Up+Power).
Now re-entered the Chinese engineering menu, use last bat file
[3] Final Flash.bat . Upon completion, we will see TWRP. After completing step 3, your phone is unlocked!
Step 3 TWRP
Swipe on bottom bar (Do not click on read only). Download chinese rom https://tinyurl.com/yygsrs7e , and intall him. Now you can get root, use magisk v16.0 or magisk v.16.7 (not higher). For the version above, you need a custom kernel, not a stock.
Click to expand...
Click to collapse
After click flash aboot
Why this happen?

[Root Guide] INSTALL ROOT / WITHOUT RECOVERY / ADB-FASTBOOT / MAGISK

Hello, first of all I apologize for my English if you don't understand me somewhere, I'm learning English. Greetings from Peru.
Files and programs you need to downloadTHIS PROCESS WORKS WITH ALMOST ALL DEVICES, ONLY IF THEY HAVE THE BOOTLOADER CORRECTLY UNLOCKED WITHOUT THE NEED OF A TWRP.
In the computer1- Lenovo Rescue and Smart Assistant, will help you in 2 things: In case your device is frozen or in a loop, there you can recover it and right there you can find and download the ROM of your device for free.
As you can see in this image my device is already selected and the ROM is already downloaded (just follow the steps and your device will be fine again)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here you will find the ROM
as you can see, location, folder and files of the ROM (it is necessary that you know where it is since you will need some files later)
2-You need to have ADB/FASTBOOT installed to be able to install the ROOT (remember that this is the safe way, there is no risk of your device freezing or in a loop, but everything is possible).
Link : https://forum.xda-developers.com/t/...vers-15-seconds-adb-installer-v1-4-3.2588979/
on device1- First of all, you have to have the bootloader unlocked, here I leave the guide since it is somewhat long to read
Link : https://www.mobilewithdrivers.com/download/unlock-bootloader/lenovo-tab-m10-fhd-plus-tb-x606f
2- After unlocking the bootloader, you have to have Magisk.apk installed on your device
Link : https://github.com/topjohnwu/Magisk/releases
3- After installing Magisk, on the main screen you have to see if Ramdisk is "yes" or "no".
It says "si" because my native language is Spanish.
4- Go back to the computer and in the ROM folder you have to find the file "boot.img" and copy it to your device
5- within Magisk where it says "install", they give it to install and something similar to this will come out:
6- They only give the following next "siguiente " and select the option of Select file "seleccionar y parchar un archivo" (I repeat again ignore if it comes out in Spanish, you in English)
7- from there the explorer will open and they will look for where they copied the "boot.img" and select it.
Once the selector is given to start or let's start "comencemos"
the process has to be something similar to the image that I will post below, you can several certain lines but at the end it has to say "done!" without any error.
8- Now to finish the process on your device, copy the file that appears in your magisk "the patched file". Copy and paste it into the ADB/FASTBOOT folder
we return to the computer
1- First of all, you have to enable "usb debugging" on your device
Link : https://www.embarcadero.com/starthe...bling_usb_debugging_on_an_android_device.html
2- Now go to your ADB/FASTBOOT folder and in a blank part open "powershell",
Now go to your ADB/FASTBOOT folder and in a blank part open "powershell" .
Holding SHIFT and right clicking open POWERSHELL
now they write "cmd" without quotes so that inside PowerShell you can use it as cmd
3- Here I will explain it in a long but correct way without errors, do not turn off the computer and leave it on since you will write an ADB command to order the device to enter Fastboot mode.
By typing "adb devices" you will find out if the drivers are correctly installed and your computer, cmd and adb/fastboot should recognize it.
now type "adb reboot-bootloader" , this will command your device to reboot into "bootloader" mode
Now this part is important that you pay attention as some people make mistakes.
Once your device has rebooted and you get to the "fastboot mode" screen, you will type the following in powershell :
fastboot devices
If the following appears, it is because your computer detects your device in fastboot mode.
Now comes almost the end of this guide, to install root do the following.
To root your device they usually tell you to type the following "fastboot flash boot boot.img", but sometimes there are errors.
what you will do is the following :
once you have written the following
you are going to drag the "magisk patches" file to the poweshell
and you will have to leave the path where the saved file is (this is a safe way so that you do not get errors)
now you just hit "enter" and it will be installed on your device
Now to finish, restart the device, install "root checker" and you will realize that you have it activated.
attached image of my device "Tab M10 FHD 2nd TB-x606x" with the latest ROM installed, having ROOT, MAGISK and modules installed
THIS PROCESS WORKS WITH ALMOST ALL DEVICES, ONLY IF THEY HAVE THE BOOTLOADER CORRECTLY UNLOCKED WITHOUT THE NEED OF A TWRP.
If the guide helped you, please comment, if it didn't work for you, please comment as I will try to help you solve the problem.
Currently I will not be contributing more to the community since I do not have my own computer, the computer I use will only be there for a few days, after that they will take it away.
when I have a new computer, I will be sharing RecoveryTWRP for some devices modified by me or some other help that I am able to carry out and finish as a project.
I thank XDA for creating this space to help, guide and for everyone to learn in the process.
I send you greetings from Peru.

Nice, thank you very much, sir.

Database Users

welcome