Related
i flashed nuclear 7.1 but i encurred in a bootloop that i could resolve only with qfil tool, so i putted cos 12.1 stock, unclocked bootloader and flashed twrp, now: when i flash ANY rom via twrp i go in a bootloop that i can only solve with qfil tool going back to cos and do everything from beginning.
i tried:
change recovery (i tried CWM but i have same problem)
wipe storage (anything changed)
i tried several roms but everyone gave me the same result: very fast bootloop in zuk logo and phone vibration
the only thing i can do is to restore a backup, but since im note able to flash mm firmware (bootloop) i cant use touch id and g-sensor
what can be the problem?
any solution?
thanks
Boot and recovery partitions
Sounds like you messed up boot and recovery sections. Since you can boot up successfully, you may try to flash back to ZUI which changes these two sections completely. If it's not a solution for you, I think the only way to repair is completely format including kernel, system and partitions. You can find the tutorial on Website.
...
you can fix it just use TOOL_ZUK_Z1_ENG_0.0.6
Try flashing COS 12.1 via fastboot.
crazyox said:
i flashed nuclear 7.1 but i encurred in a bootloop that i could resolve only with qfil tool, so i putted cos 12.1 stock, unclocked bootloader and flashed twrp, now: when i flash ANY rom via twrp i go in a bootloop that i can only solve with qfil tool going back to cos and do everything from beginning.
i tried:
change recovery (i tried CWM but i have same problem)
wipe storage (anything changed)
i tried several roms but everyone gave me the same result: very fast bootloop in zuk logo and phone vibration
the only thing i can do is to restore a backup, but since im note able to flash mm firmware (bootloop) i cant use touch id and g-sensor
what can be the problem?
any solution?
thanks
Click to expand...
Click to collapse
Hi!! I've flashed the NucleaRom too and for a couple of weeks it worked just fine. However one day, out of nowhere, the phone, while still on and working, restarted itself and entered a bootloop. After a few days it restarted normally and lasted a couple of hours but then it all started again. The BIG issue here is that when the phone enters in this bootloop where it remains on for about 15 seconds, it does it either in the system or the recovery/fastboot. I've managed to install two other ROMs via TWRP, when it miraculously remained turned on, but the problem persisted.
Is there a chance your problem was similar? How did you manage to flash via QFIL? I can't enter into that "emergency" or "download mode" in order to flash.
Many thanks in advance
i think that the problem is in the bootloader itself you should try flashing the latest os u have used and instal ordinary unofical lineage nightly (you can find everywhere) by this way your bootloader will be updated to 7.1 after that you can install any software i was having same problem when trying to migrate to lineage os
unable to install Custom ROM's
hi ,,
even i had the same problem like recovery was not accepting any ROMS... if we flash it ll go to recovery again and again,
and later i have flashed CM 13 with image file,, it worked and gone to recovery and updated the update to lineage OS 14.1 with Gapps..
hope it might help u...
crazyox said:
i flashed nuclear 7.1 but i encurred in a bootloop that i could resolve only with qfil tool, so i putted cos 12.1 stock, unclocked bootloader and flashed twrp, now: when i flash ANY rom via twrp i go in a bootloop that i can only solve with qfil tool going back to cos and do everything from beginning.
i tried:
change recovery (i tried CWM but i have same problem)
wipe storage (anything changed)
i tried several roms but everyone gave me the same result: very fast bootloop in zuk logo and phone vibration
the only thing i can do is to restore a backup, but since im note able to flash mm firmware (bootloop) i cant use touch id and g-sensor
what can be the problem?
any solution?
thanks
Click to expand...
Click to collapse
crazyox said:
i flashed nuclear 7.1 but i encurred in a bootloop that i could resolve only with qfil tool, so i putted cos 12.1 stock, unclocked bootloader and flashed twrp, now: when i flash ANY rom via twrp i go in a bootloop that i can only solve with qfil tool going back to cos and do everything from beginning.
i tried:
change recovery (i tried CWM but i have same problem)
wipe storage (anything changed)
i tried several roms but everyone gave me the same result: very fast bootloop in zuk logo and phone vibration
the only thing i can do is to restore a backup, but since im note able to flash mm firmware (bootloop) i cant use touch id and g-sensor
what can be the problem?
any solution?
thanks
Click to expand...
Click to collapse
i am continuously on the boot loop! how to get rid of it?
plz help its been 4 hrs, i think i am in trouble! any possible solutions!!!!
U can try one thing.... Install cm13 with flash file and then restart - - & go to recovery select install update and select lineage 14 and G apps... I did like this . And it worked....
I Installed the unofficial cynogenmod 14 with gapps , and i was enjoying the new rom. After using the rom for 8-10 hours , the mobile froze , so i had to restart the phone . After the phone started , it started to lag , and while it was lagging it restarted on its own, and was stuck on boot logo.
I waited for a long time for it to boot up , but it was stuck there , so i tried flashing the unofficial cm14 again as it was in the internal storage , but the result was same no matter how many times i try , and in between numerous OS flash attempts , i accidentally wiped the INTERNAL STORAGE
Getting the PC to recognize the phone , and also for the ADB and FASTBOOT to work properly was way too much of a pain , but i was able to get everything correct so ADB and FASTBOOT were working .
AND THAT'S HOW MY JOURNEY BEGAN.
I HAVE FLASHED ALL THE OTA ROMS , flashed the official cynogenmods , flashed the unofficial cm14 and cm 14.1 , tried flashing thru MSM8994DownloadTool , all of the Roms i FLASHED were successful even the MSM8994DownloadTool was SUCCESFULLY FLASHED
BUT MY PHONE STILL DOESN'T BOOTS UP IN SYSTEM , IT'S STILL STUCK AT THE ONEPLUS BOOT LOGO
I LIVE IN BANGLADESH (ASIA) , after i failed so many times and given up all hope , i went to the mobile shops for repairing the HALF DEAD SOUL , and its really sad that even they were not able to make it LIVE AGAIN
ANY HELP TOWARDS MY SITUATION WILL BE REALLY REALLY APPRECIATED
It maybe cause of old modem. try restoring to stock(i.e oos 3.x) or flash latest modem then latest recovery and Rom.
ThePresence said:
It maybe cause of old modem. try restoring to stock(i.e oos 3.x) or flash latest modem then latest recovery and Rom.
Click to expand...
Click to collapse
Tried the op2 mm modem , the phone automatically restarted to recovery with a new recovery , but its still stuck
talhaisdead said:
Tried the op2 mm modem , the phone automatically restarted to recovery with a new recovery , but its still stuck
Click to expand...
Click to collapse
Are you following the right steps to flash rom? if you don't rom won't boot. also try resetting your phone to stock, it might help you.
ThePresence said:
Are you following the right steps to flash rom? if you don't rom won't boot. also try resetting your phone to stock, it might help you.
Click to expand...
Click to collapse
Yes , but it still doesn't work . No errors are given while flashing
Hi guys, been using my rooted but otherwise stock OOS rom with TWRP and Magisk for the past few weeks. Today I decided to take the plunge and try either the Lineage OS or Resurrection Remix roms.
I'm using the latest OFFICIAL TWRP.
So I decrypted following the instructions to flash "no-verity-opt-encrypt-5.1.zip", then format data. All went well, so I then sent over the ROMS I wanted to try out. I started with the official ResurrectionRemix. Bootloop. Then the unofficial LineageOS. Bootloop.
Ok, well I guess I'm not gonna get to use any of the cool new OS's for awhile. I'll install the full stock firmware zip so I can have a working phone again. Bootloop.
Now when I say bootloop, the phone is booting to the BootAnimation and just repeating it. It shows the proper boot animation for whatever zip I have installed (resurrection/LOS/OOS), but it stays on there for up to 20 minutes before I have to hard reboot to the recovery again.
I decided to install the stock recovery trying a few methods. I first tried the ALL-IN-ONE tool. It said it flashed the recovery fine, so I booted to the recovery and after staying on a black screen for too long, the language options came up and I sighed a breath of relief. But before I could select English with the volume buttons, it rebooted by itself. It did this again when I manually entered recovery. So I figured maybe the tool flashed the wrong version, so I googled stock recovery for OnePlus 5, I found a few random links for stock recoveries for the OP5 and flashed them, but they more or less do the same thing or not boot at all.
I've tried changing the filesystem for both Data and System using any combinations of EXT4 and F2FS. Everything results in boot animation bootloops.
I have been flashing Roms since the Samsung Galaxy S3 and every phone since and never had any problems.
Currently when trying to install the stock Full OOS official zip with TWRP, the phone won't even go to the boot animation, it only goes to a black screen with the top LED in a light blue color.
I have also tried every version of TWRP there is for the OnePlus 5. Unofficial, Official, 3.1.1-0 and 3.1.1-1.
So I guess my question is....What filesystem is each partition supposed to be on and for which OS?
Lineage based:
System: ?
Data: ?
OOS Based:
System: ?
Data: ?
And any ideas on getting my phone running again?
And anyone have an official confirmed working version of the stock recovery? The one from ALL-IN-ONE TOOL doesn't work for me. It loads the language selection, then the screen goes black with a light blue LED on the top of the phone.
Actually I'm getting that on some roms instead of the bootanimation, like FreedomOOS. What does it mean when you have a black screen and a white LED?
Man, I really thought I was getting somewhere. If I boot into TWRP, change the Data partition to "F2FS", then flash the stock recovery, the stock recovery will boot, however, when inside the stock recovery and I try to flash the stock zip, it says "Flashing, don't turn off your device" for about 5 seconds and then goes back to the list of roms on the SD card, not having flashed anything at all.
Ok, I have the official stock recovery from the OnePlus site, but still can't use it. Here is was happens depending on how I left it with TWRP:
System: F2FS
DATA: F2FS
- Stock recovery will load after some time, freeze, then the screen goes black with white LED on top.
System: EXT4
DATA: F2FS
- Stock recovery loads fine, I can go through the settings and install from SD card, but when I do it says "Flashing, don't turn off your device" for about 5 seconds and then goes back to the list of roms on the SD card, not having flashed anything at all.
System: EXT4
DATA: F2FS
- If I try to flash stock rom through TWRP, it just boot loops on the animation forever.
I have now also tried flashing the stock boot.img, but no difference.
I have 2 things you can try!
First, replace the bootloader with stock and do a factory reset:
1. flash the stock recovery over
2. then in fastboot mode enter, fastboot oem lock (This forces the phone to wipe cache and data, and also do a complete reset)
Did it work? if yes YAY if not go to Second!
Second if your system.img is ****ed up you have to replace it!
Download the newest version of the stock rom from oneplus link here
Unpack it
research how to use an extractor to convert the system.new.dat to system.img
once thats completed enter fastboot mode and flash the new system.img over with Fastboot flash system system.img
now go into recovery and do a factory reset and wipe cache, and dalvik
Please reply back wether or not this work
"Ihave 2 things you can try! First, replace the bootloader with stock and do a factory reset..."
Is the bootloader simply the boot.img?
After doing the first thing, it simply says that the device is corrupt and will not boot. But it is locked again.
But I will have to unlock it again to do any further flashing.
Hmm, I think I may have gotten it. After unlocking again, flashing the stock recovery and boot.img, then locking again and wiping in the stock recovery, I have finally booted into the stock rom.
I still have no idea what went wrong, and I really want to know, so that in the future I can flash other Roms, like LineageOS.
I mean, I followed the steps exactly.
If it says the device is corrupt it simply means you got something else besides stock rom.
So now unlock it and try the system.img instead
It was because I still had TWRP with the stock rom.
I got it working though, thanks for your help.
Do you have any idea on what might have went wrong when trying to flash the lineageOS based roms and why it got messed up so royally?
Great to hear you fixed it ^_^
Probably some minor bug, if you wanna try installing lineageos again use the 3.1.1 TWRP build that supports backups and do a full backup so you don't have to go thru all this again
---------- Post added at 12:17 AM ---------- Previous post was at 12:13 AM ----------
Not really just try again but remember to use TWRP 3.1.1, as 3.1.0 don't support backup and probably have been part of your problem
If your trying again and gets it successfully installed could you do me a favor and test if Drivedroid works on it? And pm me the result, I'm looking for a rom where Drivedroid will work... Haven't found one so far
You know, I did do a backup with the OFFICIAL TWRP, but it also resulted in a bootloop. I made the backup after decrypting, so I don't know why it bootlopped.
https://forum.xda-developers.com/oneplus-5/development/rom-unified-lineageos-7-1-2-t3635483
Is this the one you tried installing?
I tried like every ROM at one point yesterday, but I think I started with
https://forum.xda-developers.com/oneplus-5/development/rom-resurrection-remix-n-7-1-2-t3636578
Did you remember Gapps?
Also in some cases its better not to root before you have the custom rom running, you usually only need a custom bootloader like TWRP
Yeah, I tried with Gapps, and I never rooted before first trying to boot.
As of yesterday Ressurrection remix, released the first official stable build so try again your should'nt have any problems if you follow the guide 100%
Ever find a solution? I'm stuck here now. Can't get any ROM to boot up, they all get stuck on the boot animation
Bump. I am also stuck in this state
I seem to have hard bricked my 9T after flashing the MIUI 11 rom from xiaomi.eu. I think culprit is a totally botched/corrupted boot loader and I have no idea how it happened. I've tried reflashing back to stock through stock image .bat files, but no dice. It flashed everything but the device still refuses to boot past the MI screen. If I try to boot into TWRP, my device gets stuck at the TWRP splash screen, no matter which version it is. Does anyone know what I can do or try at this point? Thanks.
So do I, first time I successfully instal first beta v25 miui 11, and than when the v26 comes, stupidly, i flash it from twrp, it tells me that i succeed installing that zip, and than i wipe art and cache and reboot system, but what next i know, my phone brick, i can not instal anyrom, from mi flash tool, or from anywhere. I did everything and still can not fix the problem.
Anyway, you still can enterin TWRP UI, after waiting about 10 to 30 minutes, because after intalling that rom, automatically your data format change from ext4 to f2fs, and twrp will need a lot of time to read your disk.
But, even after doing anything in twrp, still can not make my phone successfully boot into system.
And theres moun I/O error everytime i tried to wipe everything, or fix disk, or change disk format. Everything... and i just dont know what to do anymore.
So may be you can wait patiently until you can entering twrp ui, and please lemme know if you know how to fix this problem
Soapy! said:
I seem to have hard bricked my 9T after flashing the MIUI 11 rom from xiaomi.eu. I think culprit is a totally botched/corrupted boot loader and I have no idea how it happened. I've tried reflashing back to stock through stock image .bat files, but no dice. It flashed everything but the device still refuses to boot past the MI screen. If I try to boot into TWRP, my device gets stuck at the TWRP splash screen, no matter which version it is. Does anyone know what I can do or try at this point? Thanks.
Click to expand...
Click to collapse
i have experience that, then i flash the twrp chinese version and it works.
@flamedrops which one if i may know? I tried 3.3.1-0916-redmi_k20-CN and still not work ?
Soapy! said:
I seem to have hard bricked my 9T after flashing the MIUI 11 rom from xiaomi.eu. I think culprit is a totally botched/corrupted boot loader and I have no idea how it happened. I've tried reflashing back to stock through stock image .bat files, but no dice. It flashed everything but the device still refuses to boot past the MI screen. If I try to boot into TWRP, my device gets stuck at the TWRP splash screen, no matter which version it is. Does anyone know what I can do or try at this point? Thanks.
Click to expand...
Click to collapse
I got exactly the same problem after installing miui 11rom. Installing firmware via fastboot was unsuccessful. God, help us ...
---------- Post added at 07:44 AM ---------- Previous post was at 07:33 AM ----------
Arif Ferdian said:
So do I, first time I successfully instal first beta v25 miui 11, and than when the v26 comes, stupidly, i flash it from twrp, it tells me that i succeed installing that zip, and than i wipe art and cache and reboot system, but what next i know, my phone brick, i can not instal anyrom, from mi flash tool, or from anywhere. I did everything and still can not fix the problem.
Anyway, you still can enterin TWRP UI, after waiting about 10 to 30 minutes, because after intalling that rom, automatically your data format change from ext4 to f2fs, and twrp will need a lot of time to read your disk.
But, even after doing anything in twrp, still can not make my phone successfully boot into system.
And theres moun I/O error everytime i tried to wipe everything, or fix disk, or change disk format. Everything... and i just dont know what to do anymore.
So may be you can wait patiently until you can entering twrp ui, and please lemme know if you know how to fix this problem
Click to expand...
Click to collapse
Just the exact same problem as mine. If you know anything about how to solve this problem, please tell us.
I had the same problem with a miui 10 weekly beta but unfortunately I wasn't able to fix it but lucky me my phone was still in a return period so I returned it back to Amazon and got my money back since then I have always stayed away from beta ROMs . I tried everything but it wasn't booting pass the mi logo as you said
flamedrops said:
i have experience that, then i flash the twrp chinese version and it works.
Click to expand...
Click to collapse
Benfatica said:
I had the same problem with a miui 10 weekly beta but unfortunately I wasn't able to fix it but lucky me my phone was still in a return period so I returned it back to Amazon and got my money back since then I have always stayed away from beta ROMs . I tried everything but it wasn't booting pass the mi logo as you said
Click to expand...
Click to collapse
Ahhhh yes, i was thinking to using my guaranteed card, as i still can relock bootliader with mi flash tools, already trying anything for couples day with zero result, and im giving up hahaha
Arif Ferdian said:
Ahhhh yes, i was thinking to using my guaranteed card, as i still can relock bootliader with mi flash tools, already trying anything for couples day with zero result, and im giving up hahaha
Click to expand...
Click to collapse
did you really reboot it using adb reboot twrp? and reboot system on twrp using twrp cn version?
Yap @flamedrops i already do, and even tried all the TWRP version that exist, and also reflash many Rom, from stock, eu, ct, aosp, miui 11 25, miui 11 26, i flash from adb sideload, from twrp via usb otg, via miflash tool,
I flash boot.img, etc
Still no result.
Already tried everything that i could thinking about
flamedrops said:
did you really reboot it using adb reboot twrp? and reboot system on twrp using twrp cn version?
Click to expand...
Click to collapse
This LR. TEAM is twrp cn version right? And in fact, this version hardly booting to twrp ui version after this problem, easier to entering twrp ui with the ugly themed greek version
Arif Ferdian said:
This LR. TEAM is twrp cn version right? And in fact, this version hardly booting to twrp ui version after this problem, easier to entering twrp ui with the ugly themed greek version
Click to expand...
Click to collapse
ok, yes thats it. have you tried to flash magisk?
@flamedrops not yet, i never tried to flash magisk yet, ill tried next time i could pass twrp splash screen
flamedrops said:
i have experience that, then i flash the twrp chinese version and it works.
Click to expand...
Click to collapse
Can you list your steps to fix this? My data and cache partitions are 0kb and i get i/o errors too.
I have persist problems after installing muiu 11 over the los16.
Thinking about relock it and sens it back to aliexpress seller.
@mvha just go into fastboot mode, and flash persist.img from stock fastboot rom,
With command : fastboot flash persist persist.img
Thats all
Arif Ferdian said:
So do I, first time I successfully instal first beta v25 miui 11, and than when the v26 comes, stupidly, i flash it from twrp, it tells me that i succeed installing that zip, and than i wipe art and cache and reboot system, but what next i know, my phone brick, i can not instal anyrom, from mi flash tool, or from anywhere. I did everything and still can not fix the problem.
Anyway, you still can enterin TWRP UI, after waiting about 10 to 30 minutes, because after intalling that rom, automatically your data format change from ext4 to f2fs, and twrp will need a lot of time to read your disk.
But, even after doing anything in twrp, still can not make my phone successfully boot into system.
And theres moun I/O error everytime i tried to wipe everything, or fix disk, or change disk format. Everything... and i just dont know what to do anymore.
So may be you can wait patiently until you can entering twrp ui, and please lemme know if you know how to fix this problem
Click to expand...
Click to collapse
This makes sense as I remember trying to boot into stock recovery early in the morning. I woke up and it finally booted, but the recovery was in Chinese. I will give 4PDA TWRP about an hour and see what I can do. Thanks.
Soapy! said:
This makes sense as I remember trying to boot into stock recovery early in the morning. I woke up and it finally booted, but the recovery was in Chinese. I will give 4PDA TWRP about an hour and see what I can do. Thanks.
Click to expand...
Click to collapse
If you can not use 4pda, i suggest u to use greek one, thats twrp version the must successfully booting in my experiences
I am thankful that I saw this before updating to newest miui 11
flamedrops said:
ok, yes thats it. have you tried to flash magisk?
Click to expand...
Click to collapse
Can not flash magisk, etc hahahhahaa
Arif Ferdian said:
If you can not use 4pda, i suggest u to use greek one, thats twrp version the must successfully booting in my experiences
Click to expand...
Click to collapse
After you used the Greek twrp did you manage to solve the problem?
Hey!
I installed LineageOs on my Xiaomi Mi A1, everything went okay but when I installed the Gapps, it got stuck on the LineageOs logo. The volume button wasn't working right, yet somehow, I manage to enter TWRP and wipe that OS and restore the backup with the original Android One. But when I boot it, it got stuck on Android logo, unable to enter fastboot, TWRP or hard reset because of the volume button not working.
I don't know what else to do, to be honest...
p.d.: I'm new here, sorry if this is not the right section to ask.
Are you 100% sure that you have chosen right version of GApps? because i never had any issues with GApps causing boot loop. BTW what lineage os version 16 or 17 ?
I never had any luck restoring stock rom backup via TWRP either i have no idea why whenever i restore it will stuck on androidone logo.
royalasif said:
Are you 100% sure that you have chosen right version of GApps? because i never had any issues with GApps causing boot loop. BTW what lineage os version 16 or 17 ?
I never had any luck restoring stock rom backup via TWRP either i have no idea why whenever i restore it will stuck on androidone logo.
Click to expand...
Click to collapse
I chose Android 10 GApps since I installed LineageOS 17. I thought it was the right version.
So TWRP can't be used for stock rom? I didn't know, maybe that's what got me stuck on Android One logo.
Any idea on how to get out from that loop? ?
Dont worry bootloop is not a problem download pixel experience it include gapps boot ur phone to twrp copy rom into internal or sd card Wipe system , data , cache and install the rom ..
TWRP should backup and restore stock image but i think there is something with this phone which wont let twrp to apply system restore i have done it 10 times and i failed everytime.
Edit: do let me know how it goes:good:
royalasif said:
Dont worry bootloop is not a problem download pixel experience it include gapps boot ur phone to twrp copy rom into internal or sd card Wipe system , data , cache and install the rom ..
TWRP should backup and restore stock image but i think there is something with this phone which wont let twrp to apply system restore i have done it 10 times and i failed everytime.
Edit: do let me know how it goes:good:
Click to expand...
Click to collapse
Definitely I'll try Pixel Experience! Seems like a good choice. I still need to figure out how to enter Fastboot or TWRP without the volume button.
try adb cmd if it works if not then u have to boot your device to EDL mode by test point method and then flash stock rom
ranjodhricky said:
try adb cmd if it works if not then u have to boot your device to EDL mode by test point method and then flash stock rom
Click to expand...
Click to collapse
Adb cmd won't recognize the device, so I'll have to boot it to EDL mode. Is there any guide here? I don't know how to do it.