I would like to know if after installing android on the nintendo switch it is possible to reverse the process, that is to have the original nintendo switch operating system again. Can be done???
You install android on sd card not on Switch memory
So you have 2 separate systems.
If you want go back to Switch original os just reboot Switch.
Related
Is it possibile installing a different O.S. on a SD?
Is it possibile booting from an O.S. installed on a SD card?Just like a powerful PC can we create a dual boot loader?
It would be wonderful making a choice to start from resident O.S. or from an installed O.S. in the SD.
Thanks in advance for your kind reply.
i doubt it
never heard about the bootloader being able to use the sdcard for anything but to take an image from and flash the rom with it
also sdcards are very very much slower then internal flash so it would mean a very very slow start if it was possible
well. actually i had such idea. the idea is to integrate sd drivers to xip, create imgfs and 2 fat partitions on sd and launch xip from xip. unfortunately, because of some strange bootloader behavior on my asus 525, i have not yet managed to start a xip from ram, it keeps falling to the one on DoC..))) but i think everything is possible. just you need to be very careful when migrating from flashdrv to sdmemory - it`s hard to set up the driver for os root correctly
I am about to install Android on my HTC HD2, and the advise I was given was that I must use the SD method. I just want to be sure.
I need a system where when I start the Phone Winmo starts up, and then I run another program to run Android, and then I can go back and forth (via reboot or some other way).
Thanks for your advise and information!
Chaz
So far as I know, you'll have to go with the SD variant if you want to keep WinMo. That way, WinMo is only a re-boot away. It's the method I prefer as I'm not so taken with either Android or WinPhone to go for the full NAND flash.
yeah, you would need to use the SD card method, i would recomend using RAM builds because they are very fast!
Yes, you must avoid the NAND versions, cause these will erase your Windows Mobile ROM and replace it by a Android ROM.
Thus, you have to choose a build inside the "HD2 Android SD Development" thread.
But here inside it is not always simple. Cause for some SD builds you will need to flash MAGLDR to be able to boot these builds, while for others the old method of executing CLRCAD and HARET is much simpler.
everytime i download the files, only three files pop up. clr_cad or whatever doesnt come up, and i cant do anything with the files i have. what do i need to do?
Are you trying to install a SD android or NAND android. SD android is using SD card to boot into android which retain your Window 6.5 OS. NAND android is directly boot into android without going through Window OS like a real android phone. Follow my sig for instructions.
I just recently put an android build on my sd card, and it works fine and everything. But none of my contacts from my sim or sd card carry over. Also every time I soft reset the phone, it goes back to normal windows, and the time and date will be completely off. Is there a way I can get all my information to carry over and have android be the main operating system? Or maybe when I start my phone have the option of windows or android (Both having my saved information)
Skyfire1995 said:
I just recently put an android build on my sd card, and it works fine and everything. But none of my contacts from my sim or sd card carry over. Also every time I soft reset the phone, it goes back to normal windows, and the time and date will be completely off. Is there a way I can get all my information to carry over and have android be the main operating system? Or maybe when I start my phone have the option of windows or android (Both having my saved information)
Click to expand...
Click to collapse
To get the contacts from Sim, go to contacts (in android) and press menu. Import from Sim card. There may also be an import from SD card, can't remember. The only way to have Android as the main OS is to completely replace Windows with NAND Android, there are many guides as to how to do this. One thing you can do is download exceller build loader or another automatic build loader (search for these in the forums) which will give options to automatically load Android or to cancel and load Windows at boot. It automates the process of running CLRCAD and Haret, and can launch android within 3 seconds of loading Windows, if needed.
As for the time and date being off, I too had this problem until I flashed a custom Windows ROM. I would recommend OzDroid if you are going to do this, it has an automatic build loader built in and is bare Windows, meaning that the load times are extremely quick.
Hope this helps
Hello,
I am looking for some advice with regard to a speciifc problem I have with my HD2 which is running Android from SD using haret.exe etc to start the system from within Windows Mobile 6.5. The android files are currently held on a 8GB sandisk card. I have prefered this method of using android basically because I find it useful to remove the SD card and create a backup of the files onto my PC, which gives me peace of mind before installing new tryout software, just incase something goes wrong, I know I have the option to go back to a working system very quickly by reloading the files back to the SD card from the PC backup.
Recently I have been thinking that it might be easier if I could backup the files using the phone directly, so I decided to buy a 16GB card in order to partition it into two virtual 8GB drives and load my existing android os files onto one partition, whilst using the second partition to save a backup of android. I thought I should be able to create a backup of android from within WM6.5 instead of having to remove the card and rely on a PC all the time to do this job.
So, using MiniTool Partition Wizard Home Edition, I formatted and partitioned the new 16GB SD card, I used FAT32 for each partition and proceeded to copy my android files to the first partition of the new card. I installed the card into my HD2 and started the phone up which booted into WM6.5
From within WM6.5, I used the file explorer and could see both partitions appearing as separate SD cards, the first containing all my android os files etc, and the second partition was empty of course. Just as a test I thought I would try a copy and paste of a couple of files from the android partition to the empty partition, and this worked just fine. I thought to myself I am onto a winner here : ) Read on....
With that I decided to boot into android by clicking on haret.exe.
The system started to boot as normal and everything appeared to be going very very well. Booting completed and the system was ready to use..... Then I thought I would have a look around and see if it was running ok. OH DEAR.... It was reporting that it couldn't find the SD card, even though it had booted from it ! All my files and folders inaccessible and any programs that had been moved to SD card wouldn't start up or were missing from the list of installed apps. I still cant understand why the system has booted from an SD card that it cannot find once the system has booted......
This whole excercise was basically motivated by the need to be able to backup and restore the system from one partition to the other without the constant need to remove the SD card and do the job from a PC. (Constant removal of the SD card is starting to bother me incase I end up wearing the card slot out)
So basically my question is can this be done using my existing android install? (I wouldn't want to start again and install from scratch because the system is highly customised, and has took me a long time to get where it is now) I want to be able to have two partitions on my SD card, one which boots, runs android and holds all my files associated with android, and a second parition which I can use to create and restore a backup from within WM6.5.
This is not a desperate requirement, but I feel it would be a lot better than needing to rely on having my PC to hand all the time. This idea has come from my longstanding history of creating backups using GHOST and similar applications in Windows XP. I would like to do the same with my phone. Obviously I would still periodically make a backup to the PC for safekeeping but it would be more convenient to do it with the phone itself.
Any advice on where I am going wrong would be very useful. Also if you can suggest any other ways of making a strong reliable backup that makes an image of 'EVERYTHING' as is from within android directly, please let me know. I have had a look at Titanium backup, but not sure if it would make a mirror image of 'EVERYTHING' the way I would like to do it (like Ghost does in windows). The way I am doing it at present works fine, except for having to constantly remove the card and rely on having a PC about.
Oh by the way the android version on my SD card is Froyo 2.2 incase this matters (I have never bothered upgrading because it works and does what I need it to do)
Many Thanks
Tony
Brookbond said:
Hello,
I am looking for some advice with regard to a speciifc problem I have with my HD2 which is running Android from SD using haret.exe etc to start the system from within Windows Mobile 6.5. The android files are currently held on a 8GB sandisk card. I have prefered this method of using android basically because I find it useful to remove the SD card and create a backup of the files onto my PC, which gives me peace of mind before installing new tryout software, just incase something goes wrong, I know I have the option to go back to a working system very quickly by reloading the files back to the SD card from the PC backup.
Recently I have been thinking that it might be easier if I could backup the files using the phone directly, so I decided to buy a 16GB card in order to partition it into two virtual 8GB drives and load my existing android os files onto one partition, whilst using the second partition to save a backup of android. I thought I should be able to create a backup of android from within WM6.5 instead of having to remove the card and rely on a PC all the time to do this job.
So, using MiniTool Partition Wizard Home Edition, I formatted and partitioned the new 16GB SD card, I used FAT32 for each partition and proceeded to copy my android files to the first partition of the new card. I installed the card into my HD2 and started the phone up which booted into WM6.5
From within WM6.5, I used the file explorer and could see both partitions appearing as separate SD cards, the first containing all my android os files etc, and the second partition was empty of course. Just as a test I thought I would try a copy and paste of a couple of files from the android partition to the empty partition, and this worked just fine. I thought to myself I am onto a winner here : ) Read on....
With that I decided to boot into android by clicking on haret.exe.
The system started to boot as normal and everything appeared to be going very very well. Booting completed and the system was ready to use..... Then I thought I would have a look around and see if it was running ok. OH DEAR.... It was reporting that it couldn't find the SD card, even though it had booted from it ! All my files and folders inaccessible and any programs that had been moved to SD card wouldn't start up or were missing from the list of installed apps. I still cant understand why the system has booted from an SD card that it cannot find once the system has booted......
This whole excercise was basically motivated by the need to be able to backup and restore the system from one partition to the other without the constant need to remove the SD card and do the job from a PC. (Constant removal of the SD card is starting to bother me incase I end up wearing the card slot out)
So basically my question is can this be done using my existing android install? (I wouldn't want to start again and install from scratch because the system is highly customised, and has took me a long time to get where it is now) I want to be able to have two partitions on my SD card, one which boots, runs android and holds all my files associated with android, and a second parition which I can use to create and restore a backup from within WM6.5.
This is not a desperate requirement, but I feel it would be a lot better than needing to rely on having my PC to hand all the time. This idea has come from my longstanding history of creating backups using GHOST and similar applications in Windows XP. I would like to do the same with my phone. Obviously I would still periodically make a backup to the PC for safekeeping but it would be more convenient to do it with the phone itself.
Any advice on where I am going wrong would be very useful. Also if you can suggest any other ways of making a strong reliable backup that makes an image of 'EVERYTHING' as is from within android directly, please let me know. I have had a look at Titanium backup, but not sure if it would make a mirror image of 'EVERYTHING' the way I would like to do it (like Ghost does in windows). The way I am doing it at present works fine, except for having to constantly remove the card and rely on having a PC about.
Oh by the way the android version on my SD card is Froyo 2.2 incase this matters (I have never bothered upgrading because it works and does what I need it to do)
Many Thanks
Tony
Click to expand...
Click to collapse
Android looks at storage (and cards and file systems) differently. Assuming you created the partitions okay, you would have to use the Linux mount command (sorry, more reading).
A simpler way to accomplish your goal would be to have everything in one partition on the card. Create a folder and call it "Backup_Folder" or some other name meaningful to you. You will be able to copy/paste in Windows or Android.
Having said that you might want to read more about NAND installations when you have time. It would likely run better and give you more choices. Although a learning curve, once mastered it is as simple and safe as what you are now doing.
---
Junk: something you have kept for years, and thrown away two weeks before you need it...