This is a general appeal for ideas, but mostly directed at Havoc [Havoc-OS v2.8 2019-09-09] users - I need your help. I've searched high and low for a solution and at this point I need someone else using Havoc to confirm something for me. The issue is phone call audio routing when headphones or 3.5mm audio cable is plugged in. On my old S2 for many years when I was driving I'd connect an audio cable to the 3.5mm jack and it would send audio (music, audiobooks, podcasts etc) to my car stereo. Then if I made or received a phone call, the audio from the other party would also come through the car stereo and the phone mic would easily pick up my voice a metre or so away, just like it would on speakerphone mode for a regular call.
Now I have an issue with the Note 4 where all regular audio out, music etc, will go to the car stereo but for some reason it isn't routing phone call audio to the car stereo OR the phone's external speaker. They can hear me fine from the Note 4 mic but I hear nothing. In addition, the call recording reveals that their voice IS being recorded along with mine....but there's no way for me to hear them.
I have tested this at home as well with regular wired headphones (not the handsfree type designed for phones with a mic on the cable), just plain old headphones I use to listen to stuff at the PC. The same thing happens: music and other normal audio goes to headphones but I cannot hear any audio in a call.
This is weird and I can't figure it out. My old S2 did this effortlessly for many years through multiple different ROMs and still does it now running Nougat. In my searches I came across what appears to be a solution, one of the only apps of it's kind for many years called SoundAbout, but it crashes straight away on my phone, and I read the same complaint from several users on Oreo onwards. The app seems to have been abandoned by it's dev years ago.
I've looked everywhere in Havoc settings and I can't find anything obvious that addresses the issue so I'm turning it over to you smart people. Any ideas? Before you say something like "just use a bluetooth headset in the car" - No. I'm not looking to change anything, I just want this (very simple) thing to work as it has for years, since Gingerbread! Btw, I only discovered this today for the first time as I'd never tried it before so I have no idea if it would have worked on earlier versions of Havoc or any of the Oreo ROMs I ran.
Thanks guys.
TLDR - [Havoc-OS v2.8 2019-09-09] phone call audio not routing to car stereo via 3.5mm jack, all other audio goes out just fine.
Related
Will a regular earphone work on the HD2. I hate the ones that comes with the unit and would love to use my noise canceling earphones.
I don't care about making calls with the earphones. I just want to listen to the FM radio / music with it.
Since it's got connectors to control the calls, I didn't want to short out my HD2. I searched and found a thread about someone's HD2 reseting everytime the plug in an adapter to the headphone jack. He said it works for other MP3 players, but as soon as he plugs it into the HD2, it resets the Unit and will not function.
i use my ipod earphone to listen to my device
like youtube vids and FM radio
yea, i use sony headphones fine
regular wired headphones will do fine, however i dont know about anyone else, but i can't use the phone mic in calls, i have to unplug the earphones to answer calls.
Okay, thanks. I'm going to give it a shot.
has anyone tried using your d.i. through the car speakers while talking?
On my SYNC equipped Ford it works fine once I downloaded the phonebook to the car...
I didn't bother and just use the built in speaker which is loud enough. I'll have to link it in to the stereo to see.
Okay so , Right now with my mt3g, I can hook it up to my car stereo via the mini-usb to 3.5mm adapter that it came with(it has a microphone on it),and I can make calls and hear people through my speakers. With the Inc. am I going to need another kind of adapter or will the speaker on the phone itself be good?
I found this out accdentally, but using a regular stereo cable from my DI to the car's aux input, I was able to hear calls through the speaker, and they could hear me via the phone's built in Mic. I was surprised the first time I heard it ring, but it worked very nice, no issues that they couldn't hear me and the sound quality was top notch. I really like how it will mute whatever else is playing in the meantime, like Slacker / Pandora, and continue once the call is over.
Hope this helps.
Hi,
Wondering if anyone have experienced this and have a solution. I noticed today that only one of the stereo channels seems to work. I haven't listened to music with the headset before, so I do not know if this appeared in MR2 or was there before.
The problem: When listening to music (mp3), recorded videos, or over the internet (youtube), I only get sound from one of the speakers (left). The right channel is plain dead. This is both when using the headset earphones or directly with the built-in speakers. However, when using the headset earphones and listening to radio, both channels work fine! This leads me to the conclusion that this is not a hardware failure, but a software thing. Correct?
I have used the earphones on other devices and they are good. I have also restarted the device, without any success.
Is there a setting for speaker balance that I may have accidentally switched? I haven't found a balance setting anywhere, but I may have missed it.
Please help!
Hi friends,
I would realy like some help for an issue that i have with my omnia 2..
ok, so basically i was making a setup in my car so i could listen to music
by connecting a 3.5 male to male cable (which i've made myself so it would be as short as i need it to be) to the AUX input in my car stereo system.
The music sounds sweet.
I also liked the fact that i could hear the person i was talking to on my car's stereo system, and obviously the music stops when you get a call so it's very nice..
now I know that the omnia 2 has 2 microphones (which is amazing!)
one for a regular conversation, and another one which is way more sensitive
for the use while you're using it as a speakerphone.
The problem is:
when i connect the 3.5 plug in the phone it lets me select:
1. Headphones
2. Headset
3. TV-out
when i select either of 1 or 2, the phone uses the regular mic and not the speaker mic.
i can hear the sound of my speakers in the car
(or maybe i will even hear it the same with headphones)
but i can't have the other side hear me as well as he will with the speaker phone.
I know it uses the regular mic because when i disconnect the 3.5 plug from the phone and put it on speaker, the other side hears me much much better.
(phone and me stay at the same place at the entire test)
my question is:
is there anyway to change (perhaps in the registry?) something
for the phone to use the speaker mic while anything is connected to it's 3.5 jack?
any help will be much much much appreciated.
Thanks a lot!
Roy.
Are you sure the mic doesn't work when you select "headphones"? When I use it like you do in the car, it works perfectly. In fact, I was pleasantly surprised it did, as opposed to Omnia I.
"Headset" means the original headphones with the mic on the cord, while "headphones" means regular headphones, and then it automatically uses the built-in mic.
If it doesn't work like this, take it to the service if you're still within the warranty.
Hi all,
Basically, I'm trying to figure out if the subject is possible.
What is happening now is that if I have a standard stereo audio cable plugged in (non-mic) with BT connected to a headset and I receive a call, the audio for the call goes through the headset jack instead of the BT, and because of that there is no mic to pick up my voice. This leaves me able to hear the caller, but them not able to hear me.
Any thoughts?
Thanks,
Ben
Fmstrat said:
Hi all,
Basically, I'm trying to figure out if the subject is possible.
What is happening now is that if I have a standard stereo audio cable plugged in (non-mic) with BT connected to a headset and I receive a call, the audio for the call goes through the headset jack instead of the BT, and because of that there is no mic to pick up my voice. This leaves me able to hear the caller, but them not able to hear me.
Any thoughts?
Thanks,
Ben
Click to expand...
Click to collapse
Had sort of the same thing happen to me, except I tried making a BT call while plugged into headphone jack and other end was plugged into my car's aux port. Started to make the call and quit. Guess its another limitation of the current set of roms, if I'm reading correctly.
My question is under android I would have a microphone on the keyboard so that if I was going to navigate somewhere I could just hit that and say where I wanted to go instead of typing out a long address. I am using HTC Locations, and don't see any provision for allowing me to speak my destination point.
I don't think that's possible yet, but there is a lot in the way of BT profile and audio settings that may help that. we'd probably want to look for something that doesn't auto cut off when a jack is inserted
as it stands, BT is buggered (music playback) on ultrafruit ROMs anyway so we're not missing much, xbmods ROM worked fine but his left for pastures new and everyone else is being silent on the matter.