Hi,
I can't boot into recovery using vol down+power but I can boot normally into OS and from there I can boot into recovery through ADB or third party apps.
I was trying to update my OP2 with new OxygenOS 3.0.2. As my device was rooted so I had to do it manually using TWRP. Till now I was able to boot into recovery by vol down+power.
Before flashing I wiped everything(dalvik+cache+system+data), rebooted into recovery and flashed the OOS3.0.2 full ROM. At this point the installation was successfull but I was not able to boot the OS, it was stuck on the loading screen. After several attempts to boot OS, I finally tried to boot into recovery to flash again, but I was unable to. When I press vol down+power for few sec, the phone switches off with a vibration.
Later I found out that I was supposed to use a modified TWRP. So I flashed the modified TWRP via fastboot and flashed the OOS3.0.2 full ROM again, Now I can boot into OS normally but still I cannot boot into recovery by vol down+power. But the interesting thing is that I can boot into recovery through ADB or third party apps.
I tried flashing the TWRP recovery again with no luck. I thought this could be a problem with boot.img which is contained in ROM itself so I also flashed the ROM again with no luck. Also I am absolutely sure that this is not a hardware issue with by volume buttons as I can use them properly when I boot into OS.
A quick thought, is it possible that the boot.img of the ROM itself is broken? Seems unlikely as I am not seeing anyone else having this issue. But if it is, is it ok to flash the boot.img from OOS2.x version ROM, will that be compatible? Just wanted to be sure before doing this.
Any other thoughts are welcome.
Are you used this command for flashing twrp??
fastboot flash recovery recovery.img
You should add "flash", otherwise it won't install twrp in your mobile
yes I used that command only
Dreckk said:
yes I used that command only
Click to expand...
Click to collapse
After flash recovery use this command it will help to boot in twrp "fastboot boot recovery.img " without quotes
yes I know that, thats how I booted into recovery from fastboot for flashing the ROM. But I should be able to boot into recovery by vol down+power. That is why I posted this question.
Will you please send me screenshot of cmd?? after flash recover
So the problem starts like this. I rooted my lenovo A6000, flashed it with TWRP (latest version). To flash it with custom Rom i used to go to recovery mode with an app called flashify. the custom Rom was unstable so i wiped it and tried to flash it with other custom ROM. This Rom was corrupted and now i can't boot my phone neither i can go to recovery mode to flash back to stock rom. Please I need Help!!!!
@Samridh Srivastava
Man just pull out the battery.
Put it back in.
Press VOL UP + VOL DOWN + POWER KEY and release the POWER KEY once you see the boot logo.
Your phone will boot into TWRP.
Then you can flash any ROM you want.
Thank you very much, you saved me buddy. Worked for me
Hello, ive unlocked my bootloader on my h870 and ive flashed twrp. when ive just flashed it i was able to boot into twrp but now everytime i try to boot into it it wil wipe all my data with the stock lg recovery mode can someoneone please help me? Thanks! Just got the phone a few hours ago
You have to install a custom rom or root to make twrp permanent, if you don't do that it will install always after the first boot the stock recovery.
mprovi_15 said:
You have to install a custom rom or root to make twrp permanent, if you don't do that it will install always after the first boot the stock recovery.
Click to expand...
Click to collapse
Ok but how can i install root or a custom rom when i cannot boot into twrp?
aaflan88 said:
Ok but how can i install root or a custom rom when i cannot boot into twrp?
Click to expand...
Click to collapse
You need to reflash twrp with the bootloader like the first time.
mprovi_15 said:
You need to reflash twrp with the bootloader like the first time.
Click to expand...
Click to collapse
I understand that mprovi but hen again TWRP doesn't boot unfortunately
aaflan88 said:
I understand that mprovi but hen again TWRP doesn't boot unfortunately
Click to expand...
Click to collapse
When you have flashed twrp, you do the buton combination to enter twrp, if you fail to enter twrp a the phone boots into system the stock recovery will be reflashed so you have to reflash twrp.
Try making these:
When you are in the bootloader after flashing twrp press button down+ power button. When the screen turns off quickly stop pressing power button and quickly press again until the lg logo appear.
When the lg logo appear stop pressing power button, quickly press again and stop pressing the power button and press again quickly until you see twrp logo.
These method works for me for booting twrp easily
The stock recovery appears but you have to select the factory reset option and it will boot into TWRP
mprovi_15 said:
When you have flashed twrp, you do the buton combination to enter twrp, if you fail to enter twrp a the phone boots into system the stock recovery will be reflashed so you have to reflash twrp.
Try making these:
When you are in the bootloader after flashing twrp press button down+ power button. When the screen turns off quickly stop pressing power button and quickly press again until the lg logo appear.
When the lg logo appear stop pressing power button, quickly press again and stop pressing the power button and press again quickly until you see twrp logo.
These method works for me for booting twrp easily
Click to expand...
Click to collapse
Unfortunately still not succeeded after trying all the solutions i've found here
Hey, i have the same Problem, my TWRP broke, i can't boot into recovery and my Device ist not listed in fastboot mode. Can someone help me out?
I get the ring in windows when i plugin but its not recognizing.. Can someone pls help me out?
Okay, I'm going to try to explain it, and see if I can succeed where others have not.
You install TWRP by booting to bootloader and using fastboot to push a new recovery:
Code:
fastboot flash recovery twrp.img
It seems like you accomplished that successfully. The next step is to immediately boot to recovery; do not boot the phone to system first. You will get the factory prompts for wiping data, but it will not actually wipe your data this time. Instead it will boot to TWRP.
Now, while you are in TWRP, you need to either root (flash Magisk) or install a custom ROM. If you do not, your next boot to system will remove TWRP and restore the stock recovery. If that happens, then the data-wiping prompts the next time you boot to recovery are real and the phone will wipe. So you MUST - must must must - root or install a custom ROM while you have TWRP up, in order for TWRP to persist.
If you have already experienced this problem, you need to start over at the beginning; flash TWRP again, and then follow the rest of these directions.
Maybe this will help clear up the problem for you guys.
dwasifar said:
Okay, I'm going to try to explain it, and see if I can succeed where others have not.
You install TWRP by booting to bootloader and using fastboot to push a new recovery:
Code:
fastboot flash recovery twrp.img
It seems like you accomplished that successfully. The next step is to immediately boot to recovery; do not boot the phone to system first. You will get the factory prompts for wiping data, but it will not actually wipe your data this time. Instead it will boot to TWRP.
Now, while you are in TWRP, you need to either root (flash Magisk) or install a custom ROM. If you do not, your next boot to system will remove TWRP and restore the stock recovery. If that happens, then the data-wiping prompts the next time you boot to recovery are real and the phone will wipe. So you MUST - must must must - root or install a custom ROM while you have TWRP up, in order for TWRP to persist.
If you have already experienced this problem, you need to start over at the beginning; flash TWRP again, and then follow the rest of these directions.
Maybe this will help clear up the problem for you guys.
Click to expand...
Click to collapse
Oh my god, i really really thanks for your reply, you're so fre*king good. U made my day.
Guys a little help
I only manage to see the TWRP welcome screen and the the phone automatically reboots to system
I can't get to see the TWRP menu at all!!
WTF is going on?
I have repeated the process many many times and always the same. What i am missing here?!?!?
me too when it boots in twrp only showing logo then it reboots in system what are wedoing wrong?
Got the same problem. I unlocked Bootloader, checked if unlocked (yes). After flashing TWRP i see the TeamWin Screen and phone boot again. There is no TeamWin Menu.
A try with an older TWRP-Version and flashing via fastboot with another PC does not work too.
Anybody an idea?
Did you guys manage to fix it?
Matt.
Hey, for me worked to flash TWRP 3.1.1.0.
3.2.1.0 & 3.2.2.0 still doesn't work.
Greetz
MiR4G3 said:
Hey, for me worked to flash TWRP 3.1.1.0.
3.2.1.0 & 3.2.2.0 still doesn't work.
Greetz
Click to expand...
Click to collapse
With 3.2.1.0, 3.2.2.0 and 3.2.3.0 it only briefly shows the TWRP screen and then boots into system anyway.
With 3.1.1.0 the key combination to boot into TWRP as with the other versions above simply doesn't work, again it directly boots into system without even showing the TWRP screen.
I'm stuck with a resetted phone because of this bull****, because some instructions said "oh, the reset dialog will not really reset your data..." - yeah thanks for nothing, buddy.
So what now?
EDIT: I got it working using TWRP 3.1.1.0, but the same version from the OFFICIAL site didn't work, as I described above.
The only 3.1.1.0 TWRP that works with my phone is the one from this Link: http://downloads.codefi.re/rashed/g6/
(which is linked ... somewhere here in the Forum, don't remember which thread)
Hey all, I recently flashed the xXx_NoLimits_3.5_magisk_rom
magisk module and the blu_spark_r136-custom_treble_op5-op5t_d8ba1bb.zip and my Wi-Fi function broke.
I did a backup on TWRP previously but then found out I can't boot into either recovery (not even stock recovery) or fastboot mode. I then uninstalled the xxx magisk module but still can't boot into recovery/fastboot mode. Thus, I suspect the problem is with the custom kernel. Problem is, even if I want to flash a new kernel, I can't use fastboot to install twrp boot.img
I did a factory reset but the phone just did a regular reboot with no data loss at all. Is there something I can do to get fastboot working again?
xdalu91 said:
Hey all, I recently flashed the xXx_NoLimits_3.5_magisk_rom
magisk module and the blu_spark_r136-custom_treble_op5-op5t_d8ba1bb.zip and my Wi-Fi function broke.
I did a backup on TWRP previously but then found out I can't boot into either recovery (not even stock recovery) or fastboot mode. I then uninstalled the xxx magisk module but still can't boot into recovery/fastboot mode. Thus, I suspect the problem is with the custom kernel. Problem is, even if I want to flash a new kernel, I can't use fastboot to install twrp boot.img
I did a factory reset but the phone just did a regular reboot with no data loss at all. Is there something I can do to get fastboot working again?
Click to expand...
Click to collapse
If you power down the device and power up with pressed power h volume up button what happens? Did you see the menu to select either fastboot or recovery to boot in?
Which stock oos rom do you have?
strongst said:
If you power down the device and power up with pressed power h volume up button what happens? Did you see the menu to select either fastboot or recovery to boot in?
Which stock oos rom do you have?
Click to expand...
Click to collapse
Hi, adb recovery boot, quick reboot pro app, and OP5 advanced reboot buttons didn't work, but booting into recovery manually (holding vol down + power buttons) worked, so you are right about the method. Thanks for your reply.
If you are running OOS, you flashed the wrong kernel version. Note the difference below:
blu_spark_r136-oos-treble_op5-op5t_4aea761.zip
blu_spark_r136-custom_treble_op5-op5t_d8ba1bb.zip
runing step16
fastboot reboot
Click to expand...
Click to collapse
But this boots to normal boot with completely purple not working screen.
And I couldn't figure out that it is normal install is broken but not recovery boot.
To more confusion, before accassing lineage recovery or TWRP loads common LG recovery and offers delete all user data.
This creates impression TWRP or lineage recovery is not installed and is broken.
Now everything works.
I used key combination VolumeDown Power release power on LG Logo and hold Power again. Chose erase user data / factory reset and this let me boot to custom recovery mode and flesh rom with sideload command.