Related
So.... Pokemon Go has a lot to answer for......
I have run into a really strange problem when trying to install an OTA on my *unrooted* Oneplus 2. I have been trying to fix this for days but I have completely run out of ideas.
I originally had a working stock Oxygen 3 (Marshmallow) rom with TWRP recovery on my device (not sure of the version). The device was rooted and apart from not being able to install OTAs, I was fairly happy with the setup. Then along came the Pokemon GO update that banned rooted devices. Ok, "big deal" I thought. I was quite content playing Ingress instead (a far better game by the way that doesn't rely on a "pay to win" structure). I really wasn't too worried but then I found out about "systemless root" and "Magisk". I thought that if I installed this correctly I could still play a bit of Pokemon GO when I wanted to and could toggle a root button in Magisk Manager to install OTAs when they became available.
This is where the problems started.
I followed a guide on how to unroot and install Magisk and "Phh's Superuser". The problem was that the Phh Superuser was being denied permissions for Magisk Manager, there were no pop up notifications prompting me to give it access, just toast notifications. I couldn't for the life of me figure out how to give it permission so the "enable root" slider button kept sliding back, not allowing root. This is when I used SuperSU ver 2.76 (Magisk version) and it seemed to work fine. I now had a stock Marshmallow rom with TWRP and Magisk Manager all working exactly how they should be. I could toggle root and play Pokemon GO, then return to a rooted state when I needed to.
"Awesome, mission accomplished." I thought. Now I just need to toggle root off, download the latest OTA and install it through Flashfire.
First I made a complete nandroid backup (as I've done with other devices many times before) through TWRP. I even copied the backup folder to my PC in case something went wrong.
Well, this is when the nightmare started.
The first mistake I made was to use Flashfire when it clearly stated that Oneplus devices were currently untested. Not sure if it was a big issue or not, but it was a mistake none the less. The second mistake I made was to not stop the stock recovery being replaced when prompted before the reboot. I assumed (and it even states in the app) that the custom recovery should be reverted back to the stock recovery when attempting to apply OTA updates.
So I went ahead and rebooted, waiting for the OTA to install. I'm fairly sure from memory that it went into the stock recovery, flashed the OTA and restarted.
This is when the phone soft bricked.
"Oh well, that is why I made the backup." I thought.
I reflashed TWRP in fastboot mode and attempted to restore my backup. No dice, the phone was still soft bricked.
(And by "soft bricked" and "boot looping" I mean the Oneplus logo was in the middle of the screen, "Powered by Android" was at the bottom and the two blue LEDs for the buttons either side of the fingerprint scanner/home button remained on. This for me was the tell tale sign of the soft brick because these two light go off after a few seconds after rebooting usually.
So from here I have tried EVERYTHING. All I really want now is a working stock (rooted) Marshmallow rom with TWRP. I have downloaded many different full rom zips and attempted to flash them through TWRP with no success, I have returned to stock recovery and tried flashing signed roms with no success, I've even tried flashing the official CM13 rom for Oneplus 2 (with the correct GAPPs and kernel) through TWRP with no luck.
But here is where it gets interesting......
There are a few things that are really weird...
1. I have always been able to get into Fastboot mode and ADB and Fastboot commands "work".
* Operations succeed but don't stick (for example trying to flash TWRP versions 3.0.2-1 and 3.0.2-2 through Fastboot mode result in no recovery being there at all.
2. I can flash TWRP recovery though Fastboot mode but ONLY VERSIONS 3.0.2-0 and lower. I can also successfully flash the stock recovery.
3. I can flash OxygenOS 2.2.1 but NOT ANY VERSION RELEASED AFTER THAT. Doing so results in the soft brick "bootloop" I mentioned earlier.
4. Attempting to flash the official CM13 rom for Oneplus 2 doesn't work either. Originally I got the error 7 message, but after editing "Updater-script" in the rom and re-zipping, the process seemed to work fine in TWRP but the reboot gave me... you guessed it... a softbrick.
I have flashed custom roms on a few different devices before so I'm not a COMPLETE newbie when it comes to this stuff, but I am by no means a developer or even anything close to one. I have bricked this phone in the past (long story, involved getting it without an invite and it being shipped to me with spyware on it) but I used a guide very similar to this and it worked a treat.
www(dot)androidbrick(dot)com/unbrick-oneplus-one-two-3-qualcomm-hs-usb-qdloader-9008
So, thinking that this process would format all partitions and start me from scatch I tried it. It worked fine but I was still unable to upgrade from Oxygen OS 2.2.1 or install TWRP versions 3.0.2-1 or 3.0.2-2.
I have tried all sorts of things. I have wiped, flashed and wiped again. Factory resets, dirty flashes, clean flashes.... everything. All sorts of different sources for the TWRP images and Oxygen roms... nothing seems to work.
It's just so weird considering it's not a hard brick... just a soft brick.
So I really need my phone so I am sitting on this current build because it is the only one that works.
Here are some details of the current build I am using. (using CPU-Z app)
Model: Oneplus 2 (ONE A2001)
Android version: 5.1.1
Oxygen OS version: 2.2.1
Bootloader: Unknown
Build ID: ONE A2001_14_160226
Java VM: ART 2.1.0
OpenGL ES: 3.1
Kernel Architecture: aarch64
Kernel version: 3.10.49-perf+ (56)
Root access: Yes
Super user app: SuperSU Free v2.46 (Chainfire)
OEM unlocking: Enabled
USB debugging: Enabled
And these are some of the ZIPs and IMGs that refuse to be flashed to my device.
TWRP-3.0.2-1-oneplus2
TWRP-3.0.2-2-oneplus2
Grarak's TWRP recovery IMG for Oneplus2 (modified to install CM13) according to this guide:
missingtricks(dot)net/oneplus-2-official-cyanogenmod-13
cm-13.0-20160924-NIGHTLY-oneplus2
OnePlus2Oxygen_14_OTA_019_all_1606041303_bd42fc5cc5cc4ab2
And also my TWRP backup named 2016-09-16--09-44-09
I am really at a loss as to what to do next. ANY help ANYONE could give me would be greatly appreciated. I have been all over the net looking for ways around this bt have had no luck.
As I've said, I'm not a huge tech head, but I'm not a newbie either. The only thing I can think of is that somehow one of the partitions (maybe boot? ) may have been corrupted somehow when messing around with systemless root. But I don't know how considering it's "systemless". If anyone knows how to check for corrupted partitions on the Oneplus 2 please let me know and I'll try it. Maybe formatting these partitions might help (????), but I don't want to permanently brick my phone.
But I don't know how I've got this particular build working if one of the partitions has been corrupted. And the corrupted partition thing is just a guess.....
Please, anyone, someone point me in the right direction. Again, any and all feddback is welcomed and would be very much appreciated.
This is all Pikachu's fault.
Kamakiriash said:
A very long post...
Click to expand...
Click to collapse
The normal way too update from OOS 2 to OOS 3 is:
Flash the OOS 3 signed flashable zip via TWRP to update the bootloader and firmware
Flash TWRP 3.0.2-2 via your current TWRP's recovery image flashing option
Reboot recovery via TWRP so that you now have a recovery that's compatible with the new bootloader
Wipe data, cache & dalvik-cache (but not internal storage)
Flash the OOS 3 signed flashable zip again to update the system
Flash one of the modified SuperSU zips if you want root
Reboot system
All the files you need are in post #1 of this thread.
Thank you so much Spannaa!
I was clearly missing a vital step here and let it be a lesson to anyone else in this situation....
As Spannaa said......
1. Flash the OOS 3 signed flashable zip via TWRP to update the bootloader and firmware
2. Flash TWRP 3.0.2-2 via your current TWRP's recovery image flashing option
3. Reboot recovery via TWRP SO THAT YOU NOW HAVE A RECOVERY THAT'S COMPATIBLE WITH THE NEW BOOTLOADER!
4. Wipe data, cache & dalvik-cache (but not internal storage)
5. Flash the OOS 3 signed flashable zip AGAIN to update the system.
Again, thankyou Spanna for your quick and accurate response.
The order in which you flash zips and imgs is very important it seems.
You really saved me.
I restored the TWRP backup and I am back to where I started.
Is it now possible to apply OTAs when I toggle the root off in Magisk manager and install using the stock recovery? What do you think would be the best way to do this?
And would it be worth moving to the official build of CM13 for Oneplus 2?
Thanks again, Spannaa. :victory:
Kamakiriash said:
Thank you so much Spannaa!
I was clearly missing a vital step here and let it be a lesson to anyone else in this situation....
As Spannaa said......
1. Flash the OOS 3 signed flashable zip via TWRP to update the bootloader and firmware
2. Flash TWRP 3.0.2-2 via your current TWRP's recovery image flashing option
3. Reboot recovery via TWRP SO THAT YOU NOW HAVE A RECOVERY THAT'S COMPATIBLE WITH THE NEW BOOTLOADER!
4. Wipe data, cache & dalvik-cache (but not internal storage)
5. Flash the OOS 3 signed flashable zip AGAIN to update the system.
Again, thankyou Spanna for your quick and accurate response.
The order in which you flash zips and imgs is very important it seems.
You really saved me.
I restored the TWRP backup and I am back to where I started.
Is it now possible to apply OTAs when I toggle the root off in Magisk manager and install using the stock recovery? What do you think would be the best way to do this?
And would it be worth moving to the official build of CM13 for Oneplus 2?
Thanks again, Spannaa. :victory:
Click to expand...
Click to collapse
Glad you're sorted.
Not sure about Magisk as I've never used it.
CM13 is OK but whether it's worth you moving to it is your choice. Personally, I prefer TipsyOS!
Hi,
I face the exact issue with same Oxygen OS and TWRP versions mentioned, I have tried the above steps but there are some problems:
1. Flash the OOS 3 signed flashable zip via TWRP to update the bootloader and firmware
Click to expand...
Click to collapse
when I checked the option (Zip signature verification) in TWRP, the installation failed with error "Zip signature verification failed! Error installing zip file '/sdcard/oneplus.zip'", but it's successfully installed when I unchecked (Zip signature verification) option.
2. Flash TWRP 3.0.2-2 via your current TWRP's recovery image flashing option
3. Reboot recovery via TWRP SO THAT YOU NOW HAVE A RECOVERY THAT'S COMPATIBLE WITH THE NEW BOOTLOADER!
Click to expand...
Click to collapse
second problem is that after installing the TWRP 3.0.2-2 (or above), then reboot recovery, I can't access the recovery again and the phone stuck on bootloop.
any idea ?
Aood said:
Hi,
I face the exact issue with same Oxygen OS and TWRP versions mentioned, I have tried the above steps but there are some problems:
when I checked the option (Zip signature verification) in TWRP, the installation failed with error "Zip signature verification failed! Error installing zip file '/sdcard/oneplus.zip'", but it's successfully installed when I unchecked (Zip signature verification) option.
second problem is that after installing the TWRP 3.0.2-2 (or above), then reboot recovery, I can't access the recovery again and the phone stuck on bootloop.
any idea ?
Click to expand...
Click to collapse
I don't have a OP2 anymore but that post was seven months ago and the instructions worked for numerous users.
Don't enable zip signature verification in TWRP - it's unnecessary.
Flash TWRP 3.0.2-2 via your current TWRP's recovery image flashing option and then reboot recovery directly from TWRP.
thanx for replay Spannaa,
Flash TWRP 3.0.2-2 via your current TWRP's recovery image flashing option and then reboot recovery directly from TWRP.
Click to expand...
Click to collapse
I have already did that, but same issue once I reboot "directly from TWRP" , the TWRP doesn't show up and bootloop start again.
Aood said:
thanx for replay Spannaa,
I have already did that, but same issue once I reboot "directly from TWRP" , the TWRP doesn't show up and bootloop start again.
Click to expand...
Click to collapse
Last chance and then I'll leave this for someone that has the OP2.
Are you rebooting recovery "directly from TWRP" or rebooting system?
Is your bootloader still unlocked?
Last chance and then I'll leave this for someone that has the OP2.
Are you rebooting recovery "directly from TWRP" or rebooting system?
Is your bootloader still unlocked?
Click to expand...
Click to collapse
Yes, rebooting recovery "directly from TWRP"
and bootloader loader is unlocked,..
anyway it's not important to fix the phone, it's almost one year since last time I use it, yesterday I saw it in the drawer and try to figure out the issue..,
Okay, so I rooted my Mi A1 with the help of Dhananjay Bhosale's video uploaded today.
Everything worked fine until I discovered that I couldn't install OTA updates. Pretty common thing for rooted devices (although somewhat disappointing). But the weird thing is, I was on the September security patch while installing this update but then when I booted into the system after everything was done and dusted, a notification showed that the system was finishing up with installing the August update and that the September update was still to be downloaded and installed. So I did that but the system failed to install it.
Then I checked XDA and Dhananjay, in his XDA account, has suggested that OTA updates could be installed by switching partitions (new thing in Android N). So I did that, redownloaded the September patch and everything installed just fine but then I realized that there were no root privileges in this particular partition. After some effort, I somehow re-entered recovery and switched back to the other partition, hoping that the update would stick. But it didn't. As soon as I rebooted back into system, there was that notification again (finishing up the August update and telling me to download the September patch).
So basically, I am back to square one.
Anyone knows how to break out of this vicious circle?
anirbannath said:
Okay, so I rooted my Mi A1 with the help of Dhananjay Bhosale's video uploaded today.
Everything worked fine until I discovered that I couldn't install OTA updates. Pretty common thing for rooted devices (although somewhat disappointing). But the weird thing is, I was on the September security patch while installing this update but then when I booted into the system after everything was done and dusted, a notification showed that the system was finishing up with installing the August update and that the September update was still to be downloaded and installed. So I did that but the system failed to install it.
Then I checked XDA and Dhananjay, in his XDA account, has suggested that OTA updates could be installed by switching partitions (new thing in Android N). So I did that, redownloaded the September patch and everything installed just fine but then I realized that there were no root privileges in this particular partition. After some effort, I somehow re-entered recovery and switched back to the other partition, hoping that the update would stick. But it didn't. As soon as I rebooted back into system, there was that notification again (finishing up the August update and telling me to download the September patch).
So basically, I am back to square one.
Anyone knows how to break out of this vicious circle?
Click to expand...
Click to collapse
Similar with me, I have Sep build in slot A and Aug build in slot B. I'm not able to install the Oct build.
sunshinebhushan said:
Similar with me, I have Sep build in slot A and Aug build in slot B. I'm not able to install the Oct build.
Click to expand...
Click to collapse
mine also any sol to fix this?
Steps to fix any root mess-up that might happened and/or corrupt system from tampering with files.
1. Follow this guide, you can start from the flashing part
2. Download the mi flash app + a1 fastboot stock rom
3. Flash using the guide, make sure you select 'save user data'! or you will lose all your data!!
4. Once the flashing is complete you will reboot into the august patch, go to updates and install all the updates as usual
5. Root/Flash recovery using your favorite method.
I played around the system partition too much and had some issues with play services, also I couldn't update to october patch, after doing the above, everything works great. just use this guide anytime you want a clean slate.
Also always backup everything on twrp, always a useful thing to do.
Good luck
I didn't have any such problem. This is what I did: I was on Sep patch on 'b' rooted with magisk --> installed Oct ota update --> rebooted --> rebooted to twrp, flashed magisk 13.4. and rebooted to system --> everything works.
BTW how did you get root; CF-auto root or Magisk?
Ex-Hunter said:
I didn't have any such problem. This is what I did: I was on Sep patch on 'b' rooted with magisk --> installed Oct ota update --> rebooted --> rebooted to twrp, flashed magisk 13.4. and rebooted to system --> everything works.
BTW how did you get root; CF-auto root or Magisk?
Click to expand...
Click to collapse
I used AIO tool with patched boot.img then flashfire for SuperSu.
For me, the oct update is not getting installed at the first place
sunshinebhushan said:
I used AIO tool with patched boot.img then flashfire for SuperSu.
For me, the oct update is not getting installed at the first place
Click to expand...
Click to collapse
The AIO tool uses CF root. Normally you FlashFire would be able to capture the OTA update and flash it but some have reported that it's not happening for our device. IMO you can do one of the two things.
You can do what @sooti suggested till step 4 and then root using Magisk and TWRP. Refer here.
Or
You can find which partition has sep update installed; reboot to it and unroot SuperSU; flash stock sep boot.img and install oct OTA update. After that follow this to get root.
BTW you don't need to flash TWRP; just boot to it and flash Magisk to get root.
Ex-Hunter said:
I didn't have any such problem. This is what I did: I was on Sep patch on 'b' rooted with magisk --> installed Oct ota update --> rebooted --> rebooted to twrp, flashed magisk 13.4. and rebooted to system --> everything works.
BTW how did you get root; CF-auto root or Magisk?
Click to expand...
Click to collapse
Hi. As I mentioned, I am not even on the September patch. I used to be but then I rooted it today (installed Magisk) and suddenly I'm back to the August patch. September patch only installs in 'a', which is not rooted. That doesn't really serve my purpose.
Ex-Hunter said:
The AIO tool uses CF root. Normally you FlashFire would be able to capture the OTA update and flash it but some have reported that it's not happening for our device. IMO you can do one of the two things.
You can do what @sooti suggested till step 4 and then root using Magisk and TWRP. Refer here.
Or
You can find which partition has sep update installed; reboot to it and unroot SuperSU; flash stock sep boot.img and install oct OTA update. After that follow this to get root.
BTW you don't need to flash TWRP; just boot to it and flash Magisk to get root.
Click to expand...
Click to collapse
Hi. There seems to be a problem with what you suggest. The video I followed does almost the same thing. I even have TWRP, along with Magisk of course. The problem is, when I boot to 'a' (the partition that successfully installs the September update), I find that it isn't rooted. Magisk is inactive. And root checker says that root isn't properly installed. So obviously, the question of unrooting is rendered moot.
I want to be able to install the OTA update in my rooted partition and make it stick. People have installed OTA updates to rooted ROMs (mostly using FlashFire), but Flash Fire is giving me an unusual error, something about being unable to install OTA even though it has detected it due to being unable to find some files in boot/recovery folder or something like that.
@anirbannath
Just to be clear, when you reboot to system which partition and which patch are you in?
Ex-Hunter said:
@anirbannath
Just to be clear, when you reboot to system which partition and which patch are you in?
Click to expand...
Click to collapse
@Ex-Hunter
I think I should update a little bit : I tried rooting both the partitions and what I saw was that I am on September patch on both of them now. However, the problem still persists albeit in a slightly different manner. Currently I am on partition 'a' because the WiFi is having some weird problems in partition 'b'. So now I have the update notification for the October security patch but after downloading, the system gets stuck on Step 1 of 2 of installing the update. I guess, side-effect of rooting. But this isn't the issue.
I found out that the real problem is the FlashFire app. Since I have downloaded the October patch and rooted both partitions, I had hoped that FlashFire would work now, but that same error persists (which is something like Update Engine binaries could not be found, so update cannot be handled - I have asked a separate question about that, if you would be so kind as to go to my profile and check it out).
I got bootloop when installing october security patch......
I have unlocked bootloader and also rooted my phone using CF-auto-root but when try to install october security update after reboot my phone got bootloop.....
So, what do i do now ?
anirbannath said:
@Ex-Hunter
I think I should update a little bit : I tried rooting both the partitions and what I saw was that I am on September patch on both of them now. However, the problem still persists albeit in a slightly different manner. Currently I am on partition 'a' because the WiFi is having some weird problems in partition 'b'. So now I have the update notification for the October security patch but after downloading, the system gets stuck on Step 1 of 2 of installing the update. I guess, side-effect of rooting. But this isn't the issue.
I found out that the real problem is the FlashFire app. Since I have downloaded the October patch and rooted both partitions, I had hoped that FlashFire would work now, but that same error persists (which is something like Update Engine binaries could not be found, so update cannot be handled - I have asked a separate question about that, if you would be so kind as to go to my profile and check it out).
Click to expand...
Click to collapse
Thanks for clarifying. It is interesting that you are on Sep patch on both the partitions. IMO the sure shot way of solving your problem would be to go back to stock and root using Magisk.
Follow the "Flashing Guide for Fastboot Update"guide. Download the Sep fastboot rom for Step 2; Select 'clean all' for Step 5 but do note that it will wipe all user data. Now you will be on stock sep rom on slot a. You'll get OTA notification for the Oct patch, go ahead and install. After rebooting you will be on stock oct rom on slot b.
After finishing, download TWRP and Magisk from here or you can download this package, I have included recovery and Magisk. Copy Magisk-v13.4.zip to your device.
Go to fastboot mode and verify that you're unlocked and all drivers are installed.
While in fastboot type
Code:
fastboot getvar all
You can see which slot is active.
I suggest you NOT to flash TWRP but boot to it instead.
To do so type
Code:
fastboot boot recovery.img
In a few secs you should be in TWRP. If you're not booting into TWRP disconnect the device and switch off; Press vol down button and connect the USB. You should now be in fastboot mode. Try typing the cmd again and it should work.
Flash Magisk-v13.4.zip via TWRP.
Reboot to system
Download the latest Magisk Manager and install. DO NOT update Magisk.
Download and install as usual when the next OTA update arrives. You will lose the root when you reboot. But no worries, just reflash Magisk-v13.4.zip via TWRP and you will be good to go.
P.S. @ topjohnwu is working to get official magisk on our device. When that arrives you will be able to patch Magisk to the OTA update without going to TWRP.
Ex-Hunter said:
The AIO tool uses CF root. Normally you FlashFire would be able to capture the OTA update and flash it but some have reported that it's not happening for our device. IMO you can do one of the two things.
You can do what @sooti suggested till step 4 and then root using Magisk and TWRP. Refer here.
Or
You can find which partition has sep update installed; reboot to it and unroot SuperSU; flash stock sep boot.img and install oct OTA update. After that follow this to get root.
BTW you don't need to flash TWRP; just boot to it and flash Magisk to get root.
Click to expand...
Click to collapse
I followed the steps you mentioned, all went well thanks for that. But couldn't edit build.prop with this root method tried with ES explorer (previously with CF root it was successful)
sunshinebhushan said:
I followed the steps you mentioned, all went well thanks for that. But couldn't edit build.prop with this root method tried with ES explorer (previously with CF root it was successful)
Click to expand...
Click to collapse
Go to Magisk Manager>Menu>Superuser; Check if the switch is ON for ES explorer.
You can also try Amaze file manager. Its completely FOSS. Go to Amaze>menu>Settings>Root Explorer and switch ON.
Edit: BTW you're not editing build.prop directly,are you? You can't do that for systemless root.
Ex-Hunter said:
Go to Magisk Manager>Menu>Superuser; Check if the switch is ON for ES explorer.
You can also try Amaze file manager. Its completely FOSS. Go to Amaze>menu>Settings>Root Explorer and switch ON.
Edit: BTW you're not editing build.prop directly,are you? You can't do that for systemless root.
Click to expand...
Click to collapse
I am trying to edit directly, what is the other way to edit?
sunshinebhushan said:
I am trying to edit directly, what is the other way to edit?
Click to expand...
Click to collapse
You've to use resetprop tool for that. You can modify an existing module or put a script at /magisk/.core/service.d (I think.... haven't done that in a long while). You can ask magisk related queries here (unofficial magisk 13.4) or here (official)
Ex-Hunter said:
Thanks for clarifying. It is interesting that you are on Sep patch on both the partitions. IMO the sure shot way of solving your problem would be to go back to stock and root using Magisk.
Follow the "Flashing Guide for Fastboot Update"guide. Download the Sep fastboot rom for Step 2; Select 'clean all' for Step 5 but do note that it will wipe all user data. Now you will be on stock sep rom on slot a. You'll get OTA notification for the Oct patch, go ahead and install. After rebooting you will be on stock oct rom on slot b.
After finishing, download TWRP and Magisk from here or you can download this package, I have included recovery and Magisk. Copy Magisk-v13.4.zip to your device.
Go to fastboot mode and verify that you're unlocked and all drivers are installed.
While in fastboot type
You can see which slot is active.
I suggest you NOT to flash TWRP but boot to it instead.
To do so type
In a few secs you should be in TWRP. If you're not booting into TWRP disconnect the device and switch off; Press vol down button and connect the USB. You should now be in fastboot mode. Try typing the cmd again and it should work.
Flash Magisk-v13.4.zip via TWRP.
Reboot to system
Download the latest Magisk Manager and install. DO NOT update Magisk.
Download and install as usual when the next OTA update arrives. You will lose the root when you reboot. But no worries, just reflash Magisk-v13.4.zip via TWRP and you will be good to go.
P.S. @ topjohnwu is working to get official magisk on our device. When that arrives you will be able to patch Magisk to the OTA update without going to TWRP.
Click to expand...
Click to collapse
I have updated magisk in Mi 1 and now I am not able to boot my mobile...it just restart and also not able to boot into TWRP...only it's boots into fastboot mode but PC shows waiting for device...wat to do plz help
kiran8631 said:
I have updated magisk in Mi 1 and now I am not able to boot my mobile...it just restart and also not able to boot into TWRP...only it's boots into fastboot mode but PC shows waiting for device...wat to do plz help
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=74203817&postcount=4
by flashing with flashfire rooted and installed supersu without twrp flash and now wifi stopped working rest everythig works just fine..for now i m back2stock...can any one tell me the most safe procedure wich do not break any drivers. i m on 1st october patch. thank you in advance
This post is solely for documentation that it's possible to flash the update without relocking.
It is in no way intended to suggest that you should do it this way. Please follow the recommended steps when upgrading your device.
No one is responsible for your device but you.
On that note, I've flashed my OP5 without relocking the bootloader using TWRP from codeworx.
My initial phone state:
Unlocked, latest 4.5.15 OOS, official TWRP for Cheeseburger, Magisk 15.2
The steps I followed were:
Download FULL 5.0.1 update
Download TWRP by codeworx from XDA
Backed up data via TitaniumBackup (and move to somewhere else in case of failure)
Reboot to Recovery
Flash 5.0.1 from TWRP (DO NOT REBOOT)
Flash TWRP by codeworx (Install image, choose file, select recovery)
Reboot
Wait.
Wait longer.
Seriously, like 10-15 minutes.
Use 5.0.1.
Flash Magisk 15.2 (15 and 15.1 may cause bootloops. Don't risk it)
At no point was my bootloader relocked.
Again, this is NOT the recommended way to flash this update.
If you are upgrading, please follow the recommended steps to complete your upgrade.
Hi, thanks for the tutorial. I am in the same state as your initial state and would like to give your solution a try. When you mentioned to wait for 10-15 minutes, exactly what happens on the phone during that time, ie. mutiple reboots, or boot animation, etc? I just want to know what to expect during that time.
Thanks again!
First backup & copy it to pc.
Flash codeworks recovery. Flash the rom. Flash codeworks recovery again. Reboot to recovery. If it's ok, reboot to system. System should charge in about 2 minutes, no more!
Set the phone for 2,3 minutes. Reboot to recovery & flash Magisk. For some users 14.6 works, for others 15.0. Here the man says, 15.2.
If one version of Magisk fail, you need to do it all again and when you rich to Magisk, try other version.
ToucanSam said:
This post is solely for documentation that it's possible to flash the update without relocking.
It is in no way intended to suggest that you should do it this way. Please follow the recommended steps when upgrading your device.
No one is responsible for your device but you.
On that note, I've flashed my OP5 without relocking the bootloader using TWRP from codeworx.
My initial phone state:
Unlocked, latest 4.5.15 OOS, official TWRP for Cheeseburger, Magisk 15.2
The steps I followed were:
Download FULL 5.0.1 update
Download TWRP by codeworx from XDA
Backed up data via TitaniumBackup (and move to somewhere else in case of failure)
Reboot to Recovery
Flash 5.0.1 from TWRP (DO NOT REBOOT)
Flash TWRP by codeworx (Install image, choose file, select recovery)
Reboot
Wait.
Wait longer.
Seriously, like 10-15 minutes.
Use 5.0.1.
Flash Magisk 15.2 (15 and 15.1 may cause bootloops. Don't risk it)
At no point was my bootloader relocked.
Again, this is NOT the recommended way to flash this update.
If you are upgrading, please follow the recommended steps to complete your upgrade.
Click to expand...
Click to collapse
was your phone encrypted?
What did you see during the wait?
Once the phone reboots, it's just the usual OnePlus loading logo. The red and white box with ball going around it. For a few minutes.
Your steps doesn't include wipe and format data. Was your phone in a decrypted state?
ToucanSam said:
This post is solely for documentation that it's possible to flash the update without relocking.
It is in no way intended to suggest that you should do it this way. Please follow the recommended steps when upgrading your device.
No one is responsible for your device but you.
On that note, I've flashed my OP5 without relocking the bootloader using TWRP from codeworx.
My initial phone state:
Unlocked, latest 4.5.15 OOS, official TWRP for Cheeseburger, Magisk 15.2
The steps I followed were:
Download FULL 5.0.1 update
Download TWRP by codeworx from XDA
Backed up data via TitaniumBackup (and move to somewhere else in case of failure)
Reboot to Recovery
Flash 5.0.1 from TWRP (DO NOT REBOOT)
Flash TWRP by codeworx (Install image, choose file, select recovery)
Reboot
Wait.
Wait longer.
Seriously, like 10-15 minutes.
Use 5.0.1.
Flash Magisk 15.2 (15 and 15.1 may cause bootloops. Don't risk it)
At no point was my bootloader relocked.
Again, this is NOT the recommended way to flash this update.
If you are upgrading, please follow the recommended steps to complete your upgrade.
Click to expand...
Click to collapse
I am having issues getting an OTA with Magisk 15.2 installed. MAgisk Manager is 5.5.3.
1. I did a flash of fastboot rom for the first december update of 7.1.2 without overwriting storage.
2. I unlocked the bootloader
3. I booted (did not flash) to 3.1.1 of TWRP and loaded Magisk 15.2. Everything worked fine.
4. I followed this guide https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips and went Magisk Manager → Uninstall → Restore Stock Boot. I received a confirmation that the stock boot was restored. However, at this point, my google camera still works. This seems illogical if the stock boot is replaced.
5. When I download the second december OTA update I get a failure to install error at step 2 of 2.
Has anyone had similar issues or have solution? If I post to the Magisk threads, what logs will they require and how specifically must I create the logs and where will they be stored?
I didn't get a reply here. Mod, please delete this post. I will add it at Magisk thread.
Oh, wow. I have also installed magisk in the way you have. I hope it hasn't messed with your system. However I'm fully updated so have no way of trying your method of OTA.
Please update me if you do solve your issue incase I also have similar difficulties.
It is no major issue, it is just a pain in the butt to have to flash the fastboot rom to update... It take 15 minutes and a PC if you can't get OTA...
I'm just lazy.
ludditefornow said:
I am having issues getting an OTA with Magisk 15.2 installed. MAgisk Manager is 5.5.3.
1. I did a flash of fastboot rom for the first december update of 7.1.2 without overwriting storage.
2. I unlocked the bootloader
3. I booted (did not flash) to 3.1.1 of TWRP and loaded Magisk 15.2. Everything worked fine.
4. I followed this guide https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips and went Magisk Manager → Uninstall → Restore Stock Boot. I received a confirmation that the stock boot was restored. However, at this point, my google camera still works. This seems illogical if the stock boot is replaced.
5. When I download the second december OTA update I get a failure to install error at step 2 of 2.
Has anyone had similar issues or have solution? If I post to the Magisk threads, what logs will they require and how specifically must I create the logs and where will they be stored?
Click to expand...
Click to collapse
4. restore boot image function will reflash stock boot.img to boot partition, but until reboot you are still using patched_boot.img which is loaded in memory. So you will not lose root access and all Magisk modules work (until reboot).
5. failed update could be due to tampered system partition (it is enough to mount it as RW in TWRP). Reflash fastboot images without data erase and do not modify system in any way afterwards.
_mysiak_ said:
4. restore boot image function will reflash stock boot.img to boot partition, but until reboot you are still using patched_boot.img which is loaded in memory. So you will not lose root access and all Magisk modules work (until reboot)
Click to expand...
Click to collapse
Thanks for the detailed reply.. this is the thing that confuses me. The Magical guide clear states to not reboot the phone after uninstalling the patched boot.. so how can the ota possibly pass?
ludditefornow said:
Thanks for the detailed reply.. this is the thing that confuses me. The Magical guide clear states to not reboot the phone after uninstalling the patched boot.. so how can the ota possibly pass?
Click to expand...
Click to collapse
OTA updater verifies system and boot partition (possibly other partitions too) - if they are intact, it applies the OTA patch to unused, secondary partitions. OTA updator doesn't care if your currently running boot image is patched or not, because it's not using files from RAM, but from ROM. Once update finishes its thing (stage 2/2), you install Magisk in backup boot partition, which after reboot becomes active. This is why it's possible to apply OTA while you're rooted with Magisk and you have A/B partition system (as long as you follow the guide).
So I tried updating to Oxygen is 5.0 ran into an install issue, stuck in boot loop. Lucky I had done a Nandroid back up and restore everything. The other night I decided to update to 5.1.1 thinking why not get Android 8.1.0 on my AWESOME phone. Downloaded update, placed in internal storage, booted into TWRP to do a Nandroid back up (due to issues with past update). Back up failed needed to clean drive. So I decided, phone works in Android 7.1.1, why can't what's not broken. Rebooted phone and somehow the update activated. I freaked since last time it failed and not stuck in a loop. This time update was successful but still got stuck in a boot loop. I plugged my phone to my computer and noticed all my files were gone on their install storage, no files / foldersI recognized (e.g. DCIM, DATA, DOWNLOAD, etc). Emailed One Plus and chatted with them. TWRP was gone and was back on stock recovery. Since all was lost I was asked to "Erase All". I did, rebooted and I'm now on 8.1.1 but all my stuff was lost. So I've done since searching and found FlashFire do to a Nandroid backup but need root. So my question is...
Can I re-root my phone without using TWRP but stock recovery and use FlashFire for my back ups? I am not going to flash custom ROM but if I need to flash something, wouldn't stock ROM flash anything on my phone (Magisk)?
If so, can anyone provide me with assistance on re-rooting my phone without TWRP.
Thank you
As far as i know you can't flash anything with stock recovery so you can't root. After flashing the stock os is normal that twrp is been erased by the stock. Just re flash the twrp. I mean, maybe i didn't get the problem, why you can't reflash twrp? If you do that flash twrp codeworx Universal with fastboot in the bootloader, boot in twrp, wipe cache/dalvik, flash magisk 15.3, wipe cache/dalvik, reboot system, update magisk to 16 with the app. I do that way and it worked
Hi
To root your OnePlus 5, you must to follow carefuly the steps below and take your time.
1 - Make a full backup of your data
2 - Unlock the bootloader (Note that'll erase your phone)
3 - Install another recovery : TWRP. This one : https://sourceforge.net/projects/ch...-20180414-codeworkx-cheeseburger.img/download
4 - Flash the full rom Oxygen OS 5.1.1 : http://otafsg.h2os.com/patch/amazon...23_OTA_034_all_1804201219_3824995916a49ee.zip
5 - Install magisk : https://github.com/topjohnwu/Magisk/releases/download/v16.0/Magisk-v16.0.zip
6 - Clear cache / Dalvik
7 - You're all done, reboot the phone
8 - Once your phone has booted up, install magisk manager : https://github.com/topjohnwu/MagiskManager/releases/download/v5.7.0/MagiskManager-v5.7.0.apk
Check this tread, that'll help you as well : https://forum.xda-developers.com/oneplus-5/how-to/oneplus-5-unlock-bootloader-flash-twrp-t3624877
vanzant83 said:
As far as i know you can't flash anything with stock recovery so you can't root. After flashing the stock os is normal that twrp is been erased by the stock. Just re flash the twrp. I mean, maybe i didn't get the problem, why you can't reflash twrp? If you do that flash twrp codeworx Universal with fastboot in the bootloader, boot in twrp, wipe cache/dalvik, flash magisk 15.3, wipe cache/dalvik, reboot system, update magisk to 16 with the app. I do that way and it worked
Click to expand...
Click to collapse
Hello, thanks for the info and yes, I did try flashing Magisk with stock recovery, while waiting for a reply and can confirm installation failed. So if I reflash TWRP, flashing Magisk using TWRP will work. Therefore, do you have instructions (step-by-step) on how to install TWRP. I have downloaded the latest TWRP image from their website (twrp-3.1.1-1 cheeseburger) onto my desktop. Bootloader is already unlocked as I was previously rooted under Android 7.1.
Thank you.
https://forum.xda-developers.com/oneplus-5/how-to/oneplus-5-unlock-bootloader-flash-twrp-t3624877
This is the official guide step by step, scroll down until you find "flashing twrp" if you had already unlocked the bootloader ( you already did that right??? xD). Anyway about the recovery and magisk version. The guys in the 5.1.1 thread advised to flash magisk 15.3 instead the 16 and only after the system reboot to make the upgrade to 16 with magisk app (dunno why). But when i tried to do that the last version of twrp (3.1.1-1) failed the flash. So i flashed the twrp 3.1.1-0-universal and 15.3 magisk. I can confirm this combination work, i can't tell for other combinations.
vanzant83 said:
https://forum.xda-developers.com/oneplus-5/how-to/oneplus-5-unlock-bootloader-flash-twrp-t3624877
This is the official guide step by step, scroll down until you find "flashing twrp" if you had already unlocked the bootloader ( you already did that right??? xD). Anyway about the recovery and magisk version. The guys in the 5.1.1 thread advised to flash magisk 15.3 instead the 16 and only after the system reboot to make the upgrade to 16 with magisk app (dunno why). But when i tried to do that the last version of twrp (3.1.1-1) failed the flash. So i flashed the twrp 3.1.1-0-universal and 15.3 magisk. I can confirm this combination work, i can't tell for other combinations.
Click to expand...
Click to collapse
Hello, I finally got some time to re-root my phone and was reading the instructions you provided and clicked on the download but they are TWRP 3.2.1.x and Magisk 16. Do you have the links for the files you used
Grazie
jmoricone said:
Hello, I finally got some time to re-root my phone and was reading the instructions you provided and clicked on the download but they are TWRP 3.2.1.x and Magisk 16. Do you have the links for the files you used
Grazie
Click to expand...
Click to collapse
Sorry man i typed wrong, the one i meant was 3.2.1-0 Universal codeworkx, the fourth from up to down. About 15.3 magisk i dunno where you can find It, maybe try some google research, otherwise i can send It to you by email, is a little file
Try this link, get the ZIP file from the version you want: https://github.com/topjohnwu/Magisk/releases/
In case you need, this the official section: https://forum.xda-developers.com/apps/magisk
vanzant83 said:
Sorry man i typed wrong, the one i meant was 3.2.1-0 Universal codeworkx, the fourth from up to down. About 15.3 magisk i dunno where you can find It, maybe try some google research, otherwise i can send It to you by email, is a little file
Click to expand...
Click to collapse
Hey there, sorry for the late response..but thank you for the assist..phone is rerooted..all is good..thanks again