Database Users

Need Some Help For Install Franco Kernel

Hey guys,
i have custom rom nexus pure
and i want to install franco kernel.
do i need to do somthing special before the install?
like wipe?
and another thing,in the post about the kernel it explain what to do according to your current verison of the kernel
"
If you're on a 100% stock device (stock rom + stock Kernel) or already on r8 or newer disregard the messages below and just flash - if not:
* If you're on stock rom + r7, or older, you should be flashing stock boot.img first, then r8, or newer;
* If you're on a custom rom + r7, or older, you should dirty flash the rom (or extract its boot.img and fastboot flash it) and then r8, or newer;
"
and i have just custom rom and havent the kernel so im not sure what to do.
thank you for helping

Are you with your custom rom kernel ?
If yes, then just flash fk and root (if you want to).
Profit

kauemelhado said:
Are you with your custom rom kernel ?
If yes, then just flash fk and root (if you want to).
Profit
Click to expand...
Click to collapse
thanks for the asnwer
i just switch to this rom i havent changed kernel or somthing so yes i guess im with my custom rom kernel
and i have already has root
so just download the zip and flash it?

Hmm, I guess just flash it.
I'd flash:
-unsu (unroot)
-fk r10
-supersu

Roy_Alter said:
thanks for the asnwer
i just switch to this rom i havent changed kernel or somthing so yes i guess im with my custom rom kernel
and i have already has root
so just download the zip and flash it?
Click to expand...
Click to collapse
kauemelhado said:
Hmm, I guess just flash it.
I'd flash:
-unsu (unroot)
-fk r10
-supersu
Click to expand...
Click to collapse
In your case, just flash FK r10. No need to flash SuperSU, Pure Nexus is pre-rooted.
Sent from my Nexus 5X using Tapatalk

if you took 2 minutes to read the installation intructions for the Pure Nexus ROM, you wouldve had your answer.

Soulfly3 said:
if you took 2 minutes to read the installation intructions for the Pure Nexus ROM, you wouldve had your answer.
Click to expand...
Click to collapse
where there are installation intructions for the Pure Nexus ROM??

Roy_Alter said:
where there are installation intructions for the Pure Nexus ROM??
Click to expand...
Click to collapse
In the first posts of the thread, where they always are
http://goo.gl/Sn5J4V

Soulfly3 said:
In the first posts of the thread, where they always are
http://goo.gl/Sn5J4V
Click to expand...
Click to collapse
where it say something about install kernel?
ive checked and found nothing

Roy_Alter said:
where it say something about install kernel?
ive checked and found nothing
Click to expand...
Click to collapse
my goodness... I literally have to spoonfeed you the information? I've given you absolutely everything you need to find the info and learn how to install it yourself.
Click either install instruction (dirty or clean) and READ.

Soulfly3 said:
my goodness... I literally have to spoonfeed you the information? I've given you absolutely everything you need to find the info and learn how to install it yourself.
Click either install instruction (dirty or clean) and READ.
Click to expand...
Click to collapse
so you mean that i need to do these steps
1a. Download the latest Pure Nexus zip (pay attention to the version you choose) and your custom kernel if you have one onto your phone.
1b. If you are on the CMTE variant, it is a good idea to set your theme back to stock before dirty flashing. If you don’t and your theme looks wonky after flashing, try using this app.
2. Boot into TWRP and make a backup (remove any lock screen security before this, optional but HIGHLY recommended).
3. Wipe cache and dalvik cache (optional).
4. Flash Pure Nexus zip.
5. Update your vendor image (only need to do this once per build number).
6. Flash your custom kernel (optional).
7. Reboot and profit.
just with the kernel zip?
and if the answer is yes i need to update the vendor image again? i already did it when i install the rom.
thank for the help man it mean to me alot

No. all you need to do is go into twrp and install the kernel
THose are the install insructions for when you update the rom either via dirty or clean.
since you already have the ROM installed, just install the kernel in twrp and reboot.

Soulfly3 said:
No. all you need to do is go into twrp and install the kernel
THose are the install insructions for when you update the rom either via dirty or clean.
since you already have the ROM installed, just install the kernel in twrp and reboot.
Click to expand...
Click to collapse
ok thank you

How to Revert2Cyanogenmod13 after flashing OOS 3

I was looking for instructions on this before flashing OOS beta, and can't find any.

hunter_bruhh said:
I was looking for instructions on this before flashing OOS beta, and can't find any.
Click to expand...
Click to collapse
Hello ?
And ?
What do you want ?
Are you sure you searched well ?
Search better 'cause it exists ?
Thanks.

I too have the same problem.

http://forum.xda-developers.com/oneplus-2/general/firstaid-zip-revert-h2os-mm-beta-to-lp-t3306967
try this method. I tried and solved the problem.

You can look at "H2OS Marshmallow debloated" thread.

hunter_bruhh said:
I was looking for instructions on this before flashing OOS beta, and can't find any.
Click to expand...
Click to collapse
tbiwalkar said:
I too have the same problem.
Click to expand...
Click to collapse
You can find a detailed guide below on every possible thing you want to do before after flashing OOS3 .
https://forums.oneplus.net/threads/installation-instructions-faqs-oxygenos-3-0-0.439108/
lockmunk said:
http://forum.xda-developers.com/oneplus-2/general/firstaid-zip-revert-h2os-mm-beta-to-lp-t3306967
try this method. I tried and solved the problem.
Click to expand...
Click to collapse
Isn't that the thread which should be used in case the user encounters any problem when reverting from OOS3/H2OS based roms ?
I guess the OP asked for instructions on how to get back to CM after flashing OOS3 , until and unless he screws up , he wont be needing it

mdaamir1989 said:
Isn't that the thread which should be used in case the user encounters any problem when reverting from OOS3/H2OS based roms ?
I guess the OP asked for instructions on how to get back to CM after flashing OOS3 , until and unless he screws up , he wont be needing it
Click to expand...
Click to collapse
I also faced same problem as him, which is I want to revert to CM13 after flash OOS3

Here is the simple way to move back and forth...I do it regularly...sometimes more than once a day! Keep in mind this-CM13 and Oxygen 2 versions are on the old TWRP and Hydrogen MM and Oxygen 3.0 are on the new TWRP. So look up two zips one is the revert2lollipop and flash that before flashing CM13 or Oxygen 2.O Roms. It will boot you into the correct TWRP. Find the zip H2OS_TWRP3+MMFIRMW and flash that before flashing Oxygen 3 or Hydrogen MM. It will boot you into the right TWRP. So my method if I'm on CM13 is just to boot into TWRP flash H2OS_TWRP3+MMFIRMW and it will reboot and then wipe all but internal and then flash either Hydrogen MM or the Oxygen 3 ROM or the appropriate nandroid backup...if you are in Oxygen 3 just flash the revert2lollipop and it will reboot in to the right TWRP then full wipe and flash CM13. I have done it many times with no issues. Some CM13 also require a new modem but just flash that if you get FCs in the setup...
There is a topic in development that is appropriately titled where you can find the two zip files.
Sent from my ONE A2005 using Tapatalk

Latest Stock Rom For A2017U

I am currently on Lineage OS (bought that way). Wanting to go to the latest stock rooted rom. I am worried about flashing the international version on my device. Can anybody direct me to the best location to flash the stock rom through TWRP? Also, will the lineage gapps have the correct framework to get the google dialer to work? Need it so I have visual voicemail with Verizon.
Thanks in advance.

Diceroll said:
I am currently on Lineage OS (bought that way). Wanting to go to the latest stock rooted rom. I am worried about flashing the international version on my device. Can anybody direct me to the best location to flash the stock rom through TWRP? Also, will the lineage gapps have the correct framework to get the google dialer to work? Need it so I have visual voicemail with Verizon.
Thanks in advance.
Click to expand...
Click to collapse
Usually the best way to go back to stock is using MiFlash. But there aren't many A2017U packages that i know of. You can use DrakenFX's images to go back to stock via TWRP. Just look for them on the Guides or maybe the ROMs sections

Choose an username... said:
Usually the best way to go back to stock is using MiFlash. But there aren't many A2017U packages that i know of. You can use DrakenFX's images to go back to stock via TWRP. Just look for them on the Guides or maybe the ROMs sections
Click to expand...
Click to collapse
There are all stock ROMS. For all devices and latest ones;
https://forum.xda-developers.com/axon-7/how-to/guide-ztea2017v2-0-0b08-t3658636

WesTD said:
There are all stock ROMS. For all devices and latest ones;
https://forum.xda-developers.com/axon-7/how-to/guide-ztea2017v2-0-0b08-t3658636
Click to expand...
Click to collapse
You have to use MiFlash for these right?
Need something that works with TWRP

Diceroll said:
You have to use MiFlash for these right?
Need something that works with TWRP
Click to expand...
Click to collapse
Why do you? You can use MiFlash then just reinstall TWRP with axon7tool or even axon7toolkit. Using MiFlash is better than flashing a TWRP image in my opinion, because it rewrites a bunch if partitions. Plus you can't brick it using MiFlash the right way (using images for your device) while you can provoke a DFU brick with TWRP if you mess up. And you'll have to fix it with MiFlash then, but you'll have to disassemble the phone
I had a DFU-brick when trying to go back to stock using TWRP on my A2017G, so I know by experience

Choose an username... said:
Why do you? You can use MiFlash then just reinstall TWRP with axon7tool or even axon7toolkit. Using MiFlash is better than flashing a TWRP image in my opinion, because it rewrites a bunch if partitions. Plus you can't brick it using MiFlash the right way (using images for your device) while you can provoke a DFU brick with TWRP if you mess up. And you'll have to fix it with MiFlash then, but you'll have to disassemble the phone
I had a DFU-brick when trying to go back to stock using TWRP on my A2017G, so I know by experience
Click to expand...
Click to collapse
Don't have access to a computer right now

Diceroll said:
Don't have access to a computer right now
Click to expand...
Click to collapse
Alright but the problem is that maybe DrakenFX's zips are outdated. Have a G so I don't know really.
Or you could maybe try MiFavor 5.0? You should be very careful with the install procedure as it's not just download and flash, you have to flash a bootstack and a modem file plus the ROM. I recommend using a MiFavor 5.0 ROM that is NOT based on B13 - those are buggy as hell! ADM Team V3 will do.
I'm saying this because stock for the G and U hasn't got the quick settings tiles and other rather nice stuff. Everyone either loves the look or completely despises it though, so better look at the screenshots before downloading...
Now that the AKM DAC patch is out for Lineage, I'm willing to use LOS plus BeastMode Kernel instead of MiFavor 5.0. But stock is not bad, and is usually much better on some aspects than LOS and LOS-based ROMs.

I could never get Visual Voicemail to work on Stock. Installed Google Dialer as a system app and everything. Here is a bunch of info on how the service works. I hope that, eventually, someone can isolate the specific component that could be transplanted to another ROM or figure out a step-by-step to adding it to any ROM. From what I understand, it is just a matter or the correct provisioning/config.
https://source.android.com/devices/tech/config/voicemail

No VVM makes stock a no go...

Choose an username... said:
Alright but the problem is that maybe DrakenFX's zips are outdated. Have a G so I don't know really.
Or you could maybe try MiFavor 5.0? You should be very careful with the install procedure as it's not just download and flash, you have to flash a bootstack and a modem file plus the ROM. I recommend using a MiFavor 5.0 ROM that is NOT based on B13 - those are buggy as hell! ADM Team V3 will do.
I'm saying this because stock for the G and U hasn't got the quick settings tiles and other rather nice stuff. Everyone either loves the look or completely despises it though, so better look at the screenshots before downloading...
Now that the AKM DAC patch is out for Lineage, I'm willing to use LOS plus BeastMode Kernel instead of MiFavor 5.0. But stock is not bad, and is usually much better on some aspects than LOS and LOS-based ROMs.
Click to expand...
Click to collapse
Do you have a link to the DAC patch

Diceroll said:
Do you have a link to the DAC patch
Click to expand...
Click to collapse
Lol it's in the Guides section, called AK4470 fix or something similar

@QuantumFluxx,
Hi, can you describe your phone's problem clearly, I guess I have the same problem with you. Have you fixed your problem?

@Diceroll,,
Hi, have you fixed the issue in your phone?
Can you describe the issue more clear? I guess I have the same problem with you.

ROM Official Miui 10 Global Stable For Redmi 4X

Download Here 10.1.1.0
http://bigota.d.miui.com/V10.1.1.0.NAMMIFI/miui_HM4XGlobal_V10.1.1.0.NAMMIFI_31186e0176_7.1.zip

Can I flash it using twrp. I am on arrow os 9.0 right now

manojzzz said:
Can I flash it using twrp. I am on arrow os 9.0 right now
Click to expand...
Click to collapse
Yes you can. The recovery will be replaced by stock recovery, so you'll need to reflash your recovery again

Tried
I tried it flash by TWRP and stuck on the Mi boot logo. Tried twice.

Can i flash on miui 9? device not root and i didnt flash custom twrp

alfaqih16 said:
Can i flash on miui 9? device not root and i didnt flash custom twrp
Click to expand...
Click to collapse
Yes, you can

Can i flash it using the updater app nd if i will loose data by this procedure.. I m on stable 9.6.5.0

lochNESSIE said:
Yes you can. The recovery will be replaced by stock recovery, so you'll need to reflash your recovery again
Click to expand...
Click to collapse
Flash lazy flasher after rom, and dude recovery replaces when u flash fastboot rom, not recovery

Installed it. Nice UI, smooth but still, it's loaded with stuff that I don't use.
Tried to uninstall crapware and the google apps that I don't need with system apk remover ( root ). It didn't let me, so I gave up on MIUI, again. There is a lot of useless stuff in there.
Isn't there a clean MIUI OS without heavy google apps preinstalled ?
MIUI, either you love it or you hate it ...

aman.dwivedi said:
Flash lazy flasher after rom, and dude recovery replaces when u flash fastboot rom, not recovery
Click to expand...
Click to collapse
I said that in case he doesn't have lazy flasher with him. And yes, TWRP recovery does get replaced with recovery ROM. Happened everytime I reflashed miui to fix issues. Haven't tried it with other recoveries as of yet.

saintjimmy1984 said:
Installed it. Nice UI, smooth but still, it's loaded with stuff that I don't use.
Tried to uninstall crapware and the google apps that I don't need with system apk remover ( root ). It didn't let me, so I gave up on MIUI, again. There is a lot of useless stuff in there.
Isn't there a clean MIUI OS without heavy google apps preinstalled ?
MIUI, either you love it or you hate it ...
Click to expand...
Click to collapse
Miui EU is the lightest "oficial" Miui you gonna find

manojzzz said:
Can I flash it using twrp. I am on arrow os 9.0 right now
Click to expand...
Click to collapse
did it work? I'm in LineageOS and i want to flash stable miui

eusobao said:
did it work? I'm in LineageOS and i want to flash stable miui
Click to expand...
Click to collapse
Yes it work

Hi, thanks ! Good and stable ROM.

Can i flash it using the updater app nd if i will loose data by this procedure.. I m on stable 9.6.5.0

naseer222 said:
Can i flash it using the updater app nd if i will loose data by this procedure.. I m on stable 9.6.5.0
Click to expand...
Click to collapse
Tried to flash it using updater app and I was successful flashing it.

Only recovery install?
Hi! Can i install this through settings/system update/choose upgrade from inner sd card, or i can install only through twrp recovery?

So disappointed
Even after stable release... This thing doesn't support camera 2 API.. and I'm not talking about official support... Even if you add in the lines to enable the API... It won't work after 8.9.20 and above ... Now the stable version doesn't let us use gcam too..?

Which TWRP can I use to flash?
Try latest OrangeFox, and TWRP 3.0.3, just stuck in the end of update process (can not finished).
Stock recovery has no "update" option.
Updater didn't work.
Pls advice.

weird - it's a global version and only chinese region to set in settings.
and i can't set 5x5 icons set on desktop (only 4x5), so... i'm going back to miui eu version.
---------- Post added at 08:18 PM ---------- Previous post was at 07:35 PM ----------
Oery said:
Which TWRP can I use to flash?
Try latest OrangeFox, and TWRP 3.0.3, just stuck in the end of update process (can not finished).
Stock recovery has no "update" option.
Updater didn't work.
Pls advice.
Click to expand...
Click to collapse
i've used official twrp 3.2.3-1 from https://dl.twrp.me/santoni/ and it boots (clean flash from internal storage, not from sd card).

How to install MIUI update with custom rom

hello everyone
i wanna install miui 11 bit i have fox recovery
and when i download and install the update
it give me an error and i lose my download file
how to make to install it

Do you mean Xiaomi.eu ROM? Those should be flashed with TWRP, as far as I'm aware.

Lauriso said:
Do you mean Xiaomi.eu ROM? Those should be flashed with TWRP, as far as I'm aware.
Click to expand...
Click to collapse
so can flash it with twrp or fox wothout losing data

Ok, first please tell me exactly what ROM you're on, and which one you want to flash.

Lauriso said:
Ok, first please tell me exactly what ROM you're on, and which one you want to flash.
Click to expand...
Click to collapse
i'm on miui 10 and wanna update to 11 using the simple update

The stock ROM?