{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Note
This device has different names in different countries: J2 Prime; J2 Ace; Grand Prime Plus.
Supported Models:
SM-G532G
SM-G532F
SM-G532M
SM-G532MT
above variant with /DS is also supported (ex. SM-G532G/DS)
If you have 2 SIM cards, set both of them to 2G, then your desired one to LTE or 3G, then select a SIM card in the Settings for Cellular data for mobile data.
This phone only supports LTE + 2G configuration.
Working
Boot
RIL (Calls, SMS, Data)
Wi-Fi, Bluetooth, Hotspot.
Sensors. (Prox, Accelerometer)
Audio, Video, Media.
ADB, MTP.
Brightness.
Camera (Front, Rear, Flashlight), but NOT Video.
LiveDisplay.
GPS
FM Radio
Signature Proofing for MicroG.
Not Working / Bug
Video Recording. Footej Camera works (somehow!)
3.5" Headphone not work (it detects Headphone, but still plays audio on speaker. Bluetooth Headphone works)
VoLTE. Literally no Samsung phone has VoLTE working on AOSP ROM...
Encryption
Terrible battery. REALLY TERRIBLE.
Lag when playing 720p60 or 1080p (or higher) videos. Software Encoding can only do so much.
Phone very rarely just freezes. Just force restart by quickly taking out battery and reinsert.
(bug) If you have 2 active SIM cards, you have to configure manually to:
Disable Cellular data for at least 1 SIM (Settings > Data Usage).
Set at least 1 SIM's preferred network to 2G (Settings > SIM cards > SIM x Settings).
Select 1 SIM card for mobile data (Settings > SIM cards > Cellular data)
If you find any unmentioned bugs, mention me. Any logs of those bugs are appreciated; but mentioning it with reproduction should suffice.
Issues should be posted:
Here.
In my device tree repo on GitHub, under Issue tab (<- yes, that direct link is clickable).
In the "Galaxy J2 Prime/Grand Prime+" community on Telegram.
Download
ROM: https://github.com/almondnguyen/and...age-14.1-20230623-UNOFFICIAL-grandppltedx.zip
Google Apps (optional, provided by BitGApps): https://github.com/BiTGApps/BiTGApps-Release/releases/download/v2.2/BiTGApps-arm-7.1.2-v2.2-CORE.zip
Magisk for Root (optional): https://github.com/topjohnwu/Magisk/releases/
Installation
Install TWRP (Here be TWRP).
Download the files mentioned above to somewhere that is NOT internal storage.
Reboot to TWRP.
Format Data and System.
Install ROM.
Optionally install GApps and/or Root (use Magisk).
Reboot and Enjoy!
If have 2 SIMs, be noted of the dual-SIM bug.
Credit
The dad of J2 Prime development, SubZero.
The MVP of J2 Prime dev & community, Nguyen Long. Also great at squashing bugs.
TBM_13 for tackling lots of bugs. Tysm!
melekpro for making working port ROMs (and partially fixing this ROM too)
Skyrimus for Wileyfox Spark(+) tree, whose blobs replaced some of this device's outdated / not working ones.
jmfp_bmx (and the array of Sony MTK Devs) for helping with Camera, xlog and some stuff
[email protected] for LiveDisplay fix
Someone that leaked MTK BSP O which I used extensively to fix some libs misbehaving lol.
The community over at Telegram, particularly the Bear, Chickentai, Grand Taco, Duck and D4BL.
Thanks the guys over 4pda too.
All the ones behind build guides and bug fixes which I didn't record ;-; .
Are you missing here? PM me!
Source
Kernel: https://github.com/almondnguyen/android_kernel_samsung_grandppltedx/tree/lineage-experimental
Device: https://github.com/almondnguyen/android_device_samsung_grandppltedx/tree/cm-14.1
Vendor: https://github.com/almondnguyen/android_vendor_samsung_grandppltedx/tree/cm-14.1
XDA:DevDB Information
LineageOS, ROM for the Samsung Galaxy J2 Prime/J2 Ace/Grand Prime Plus
Contributors
Prove N.
ROM OS Version: LineageOS 14.1
ROM Kernel: Linux 3.18.x
ROM Firmware Required: TWRP for J2P
Based On: Android 7.1.2, Nougat
Version Information
Status: Beta
Created 2019-07-07
Last Updated 2023-05-25
OTA update for the latest release should be out for everyone on LOS14 builds newer than 2020-12-31 !~
[ 2023-06-23 | HOTFIX 2 ]
Fixed Mobile Data not working on single-SIM devices
[ HOTFIX ]
Fixed BACK button not working.
[ 2023-05-25 ]
Fixed video playback (up to 720p30 and lower).
Fixed offline charging animation (it worked before, just no animation).
Fixed Wi-Fi hotspot.
Removed defaulted software nav-bar. The option will now be provided on first-boot and in Settings -> Buttons.
SIM signals now come up earlier on boot.
Overall optimization to performance and size.
Unified Kernel for N/O/P.
Fixed GPS and FM Radio (dunno when, dunno why, dunno how, someone just pointed it out and I tested and it just worked, LOL)
Older changelogs:
[Feb 16 22] (20220216) (Emergency hotfix):
REALLY disable persistent logcat. Are you kidding AOSP??
#logd.logpersistd.enable=true
Ignore RSSNR. This fixes LTE signal instability, though it doesn't necessary fix terrible signal strength on both 3G and 4G.
Add missing OMX symbol, which fixes local video playback it didn't, MtkOmxVencEncod crashes.
[Feb 13 22] (20220213):
Fix SnapCamera crashing after taking 1 pic.
Fix wakelock tracker (no more spam in data/system/dropbox).
Fix mobiledata for SIM 2.
[Feb 10 22] (20220210):
Signature Spoofing for MicroG.
Manually giving permission to MicroG is required.
Fix LiveDisplay.
[Feb 03 22] (20220203) (Hotfix):
Clean build. (remove leftover garbage)
Turn off persistent logcat for release build. (it eats a TON of storage)
[Feb 02 22] (20220202)
Fixed RIL (YAY!).
Fixed log spamming from mtk_agpsd and AudioParamParser (save some battery).
Fixed flashing red border from the previous build (due to it being eng build).
Kernel: backport MMAP_RND_BITS and MMAP_RND_COMPAT_BITS for futureproofing and some stuff that needs randomness.
Fixed 1080p and 720p60 playback lags. (using stock lib/shared objects instead of ones from another device)
Need (really) good connection regardless.
Update: still lag sometimes.
[Jul 19 21] (20210719)
Fixed HW recent key.
Fixed random crash. (doesn't appear to happen on my end)
Fixed SD Card for 3rd-party apps.
Kernel 3.18.53, some tiny improvement.
F2FS support.
NOTE: OTA will not be available for this release. It will be resumed when this hits beta.
[Nov 25 20]
July 5 2020 Security Patch
Allow RIL to work (with catches)
Fix Camera
Add partial doze (It might not work well yet, 30% overnight, no curves)
Fix stability (prevent phone freezing because of log spams)
[Dec 1 19]
November Security Patch
Cosmetic stuffs
[Sep 25]
Truly fix Video Playback
MTP [Internal Storage only, SD Card will not show up]
Baseband + IMEI for SIM 1
Some smaller bugs fled away.
[*] [Jul 19]
Included Wi-Fi/BT Patch in final ROM
Unintentionally fixed Orientation/Proximity/Accelerometer (lol?)
Fixed Audio / Media (In a nutshell, YouTube works )
[*] [Jul 10]
Fix Wi-Fi
Removed boot hacks
[*] [Jul 7]
Initial Release
[/LIST]
reserve 2
Wow. I hope a finished ROM will be come on someday soon :3
Nice ?
Nice work! I would like to help a little bit more but it's my main phone and i never fixed anything in a device tree, just compiled haha
Hope
Sent from my Samsung SM-G532M using XDA Labs
good work!but still a long way to go after 2 year!
Are sensors working? (proximity, accelerometer, Samsung orientation sensor)
TBM 13 said:
Are sensors working? (proximity, accelerometer, Samsung orientation sensor)
Click to expand...
Click to collapse
The orientation is certainly not working yet as it uses some of MM samsung libraries. (In fact, Wi-Fi/BT is too, have to use patch from Doogee X5Pro)
Haven't tried Proximity/Accelerometer yet.
E: pretty sure I am going to fix main stuffs first like audio, media, MTP, Lock Screen Security (because I removed keystore lib to boot this phone, can use porridge's too) and the hardest which is RIL/Telephony as this phone is the first of a kind.
little push. (just want to get some dev in works because summer is coming near to ending here :< )
Keep up the good work my guy!
Add to working/not working list:
Camera
Internal microphone
Radio
Headphone
Btw, is Bluetooth working 100% fine? Because in the XenonHD ROM of Melekpro i wasn't able to send a picture from another phone to the J2 Prime.
TBM 13 said:
Add to working/not working list:
Camera
Internal microphone
Radio
Headphone
Btw, is Bluetooth working 100% fine? Because in the XenonHD ROM of Melekpro i wasn't able to send a picture from another phone to the J2 Prime.
Click to expand...
Click to collapse
i just connect to my laptop lol. Haven't tried sending files~
btw, headphones not working? Kinda weird when audio is *mostly working (again, haven't tried)
Prove N. said:
btw, headphones not working? Kinda weird when audio is *mostly working (again, haven't tried)
Click to expand...
Click to collapse
Idk, i wasn't able to try your LOS 14.1 because it's my main phone.
TBM 13 said:
Idk, i wasn't able to try your LOS 14.1 because it's my main phone.
Click to expand...
Click to collapse
Headphone is working. But it is finicky / unstable because the main audio also is.
Bluetooth transfer works both ways (check images)
e1: audio over bluetooth works too~
-
oh, J2 Prime is my only phone lol. An used S3 is coming, so I can fully working on this device (except, Its about time to school here..... )
Prove N. said:
oh, J2 Prime is my only phone lol. An used S3 is coming, so I can fully working on this device (except, Its about time to school here..... )
Click to expand...
Click to collapse
Do you make TWRP backups or you flash the ROM, install all the apps and configure everything again?
TBM 13 said:
Do you make TWRP backups or you flash the ROM, install all the apps and configure everything again?
Click to expand...
Click to collapse
the latter one. I have my laptop for everything already, but I can't live without YouTube and updated Samsung Internet lol (is currently the only one with true Dark Mode, and I'm more of a night owl)
To be fair, I'm still using a 2 GB SD card I bought 7 years ago, so (except EFS,) TWRP backups are no go to me ~
TBM 13 said:
Add to working/not working list:
Camera
Internal microphone
Radio
Headphone
Btw, is Bluetooth working 100% fine? Because in the XenonHD ROM of Melekpro i wasn't able to send a picture from another phone to the J2 Prime.
Click to expand...
Click to collapse
I forgot to add SD Card.
TBM 13 said:
I forgot to add SD Card.
Click to expand...
Click to collapse
I'm still using it normally though. But melek reported that too and I'm working on that.
Still stuck at why RIL/telephony/baseband/IMEI does not behave (I cannot find any logs related to those, except nvram (nvdata?) not mounted/read correctly)
Related
LineageOS is a free, community built, aftermarket firmware distribution of Android 6.0.1 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
This thread is for Unofficial LineageOS 13.0 builds for klimtlte (SM-T705). The following will not be supported here:
Custom kernels
Mods
Xposed
I don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
First time flashing LineageOS 13.0 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash LineageOS
Install the Google Apps addon package (Optional)
Reboot
klimtlte Builds
Google Apps:
http://opengapps.org/
Kernel
https://github.com/exynos5420/android_kernel_samsung_exynos5420
Device Tree
https://github.com/exynos5420/android_device_samsung_klimtlte
Aytex, who made all of the banners on this post.
@Barracuda77777 (For helping along the way)
@UpInTheAir for his kernel magic and misc fixes
@crpalmer (for picassowifi device and kernel gits - the base @Barracuda77777 and @nvertigo67 started of from)
@eousphoros (for his device git)
@nvertigo67 (for his work on chagallwifi)
@Nexorrr (for his work on chagalllte)
Exynos5420 Dev Team (@deadman96385 @thompatry @ZakooZ @Orion116 @mosimchah @joshndroid @Andmoreagain @thermskin, @javelinanddart )
Deathly Adiutor App
Deathly Adiutor is an open-source, modified version of Kernel Adiutor made specifically for Exynos 5420 devices.
Features
Power Saving:
S-Pen Power Saving - Same as in Touchwiz, disables S-Pen detection if it's inserted in the slot
S-Pen Input Booster - Instantly increase CPU frequency when the S-Pen touches the screen
Touchscreen Input Booster - Instantly increase CPU frequency when you touch the screen
Touchkey Input Booster - Instantly increase CPU frequency when you touch the capacitive buttons
Touchscreen Glove Mode (Not all screens support this)
CPU Control:
CPU Settings reworked - Deathly adiutor back-end was cleaned up to work specifically with our CPU
CPU Thermal - Control all thermal throttling points for the CPU (make your device run colder... or even hotter)
GPU Control:
GPU Time in States - Same as CPU Time in States (Times in each frequency)
GPU Frequency Control (not yet supported on Nougat)
GPU Voltage Control (not yet supported on Nougat)
GPU Governor Control (not yet supported on Nougat)
Battery control:
Full power statistics - See current and maximum charging currents and current source of power
Unstable power source detection - Lowers current until the power source is stable
Customize charger current limits - Make your device charge faster (safe, if the charger can not supply enough current, the board will dynamically decrease the current)
Screen-On current limiter - Limit charging if screen is on (to avoid overheating)
Speakers:
Privacy mode - Disable main speaker if headphones are plugged in
Earpiece volume
Left/Right speaker volume
Speaker equalizer
Headphones:
Left/Right channel volume
Mono output mode
Headphone equalizer
App Themes:
Light theme - White and Red
Dark theme - Grey and Red
Credits
This post was written by @ZakooZ
This app is brought you by the exynos5420 developer team: @deadman96385 @thompatry @ZakooZ @Orion116 @mosimchah @joshndroid @Andmoreagain @thermskin, @javelinanddart, @tincho5588, @ShevT
Translators:
@ShevT - Russian
The following people deserve distinction for their major contribution:
@tincho5588, responsible for 80%+ of the code for the new features
@deadman96385, the main maintainer of the Deathly kernel and most of the remaining code
Downloads
The app can be found in the Play Store:
Free version (with ads): https://play.google.com/store/apps/details?id=com.exynos5420.deathlyadiutor.ads
Donator version (no ads): https://play.google.com/store/apps/details?id=com.exynos5420.deathlyadiutor.adfree
Helping the developers
You may have noticed there's 2 versions of this app, one ad-free for donators and one with ads.
You can help us by clicking ads you're interested in for the free version, or purchasing the donator version!
We will use the money generated by this app as common money for the developers of the team. It will be used to pay for our web-hosting (we own a gerrit server and a domain name, exynos5420.com). It will also be used to buy a new device if one of ours breaks.
Translating the App
You can also help us by translating the app to your language:
1. You can start by looking at the full english language file: Link
2. Then compare it to your unfinished language file. You can find it here, under values-xx/strings.xml, xx being your language abbreviation.
3. You can then fill-in the missing strings in your language file. Here's an example of what a proper update looks like.
4. Then you can submit your translation by using our gerrit. If you don't know how to use gerrit, just PM the translation to your favorite developer and he'll get it merged!
Bugs:
Fingerprint sensor
You tell me
is there fingerprint option to unlock the screen and please tell what is ril, because im going to flash it.
thanks and great job
Sathvik27 said:
is there fingerprint option to unlock the screen and please tell what is ril, because im going to flash it.
thanks and great job
Click to expand...
Click to collapse
simplified: ril is the hal for modems (SCNR):
https://en.m.wikipedia.org/wiki/Radio_Interface_Layer
https://en.m.wikipedia.org/wiki/Hardware_abstraction
What happens if RIL doesn't work? If camera doesn't work, can i use third party app and will camera work then?? Please help me, I'm a newbie
Sathvik27 said:
What happens if RIL doesn't work? If camera doesn't work, can i use third party app and will camera work then?? Please help me, I'm a newbie
Click to expand...
Click to collapse
About the camera, I would venture to say that what they mean by posting "camera" under the topic "Bugs", is because the hardware does not yet have a driver for the Marshmallow based software? Thus my guess is that no 3rd party app would work. I think this way because if a 3rd party camera app did work, they would have mentioned that in the OP and besides it makes no sense that a 3rd party app would work and the stock camera app not, right?
Please feel free to correct me if I am wrong.
Camera doesnt work means there is a problem when trying to link camera's hardware so all app that uses the camera (3rd party cameras, skype,etc) cant commect to the camera's hardware .
There are 2 minor issues in the latest build:
Issue #1: There is a lag with the sound. Sometimes the sound works well as it should, but most of the time there is a huge lagg when putting up volume. Some of the ui sounds play 10 seconds later. Here is a video of demonstration: https://youtu.be/qwE5JukYPHI
Issue #2: There are graphical glitches sometimes. The device os stuck on a screen and you have to wait until system ui stops and reopens. This does not happen so often, but it happens. Video of demonstration: https://youtu.be/ht-v1OWgeNg
Anyone else here who can report these issues?
Sorry for the bad video quality, but my old tablet only got a 5MP Camera to record.
If you need any logcats or specific logs, just let me know and I will help you.
Gesendet von meinem SM-T705 mit Tapatalk
I believe there is an error in the first post. It's written:
"Important information:
This thread is for Unofficial CyanogenMod 13.0 builds for klimtwifi (SM-T705)."
The SM-T705 is the LTE variant though, i.e. klimtlte.
Radio is detected in latest build and the stupid sound lagg is gone! Thank you deadman! ??
haimann95 said:
Radio is detected in latest build and the stupid sound lagg is gone! Thank you deadman!
Click to expand...
Click to collapse
Not sure how you have it working on that build currently i only have ril working on the 2/29 build because i have disabled selinux.
deadman96385 said:
Not sure how you have it working on that build currently i only have ril working on the 2/29 build because i have disabled selinux.
Click to expand...
Click to collapse
Hmm, I don't know if my ril actually works at all (I don't have a Sim), but there is progress because it detects the radio now, which it didn't in older builds.
deadman96385 said:
Not sure how you have it working on that build currently i only have ril working on the 2/29 build because i have disabled selinux.
Click to expand...
Click to collapse
It detects the SIM card, but mobile data doesn’t work. I didn’t test calls/text messages.
Thanks for the great job, deadman!
I just don't find the newer builds, could someone give me a hint/link? Or do I need to build it myself from the repo?
porarbear said:
Thanks for the great job, deadman!
I just don't find the newer builds, could someone give me a hint/link? Or do I need to build it myself from the repo?
Click to expand...
Click to collapse
Here you go: http://sean.sspencer10.com/klimtlte/
Thanks, I tried both newer ones (29/3 and 1/3) today.
My feedback:
Both are not working on my device, even after a complete Wipe:
If I flash just the ROM (and Modem before) it starts to the Screen "Starting Apps", hangs there for about 10 minutes, then the Bootscreen comes again and that stays (at least for an hour when I turned off).
When flashing the pico-version of OpenGApps right afterwards (and Wipe Dalvik/Cache) I get to see the PIN-Entrry for my SIM (so ril runs obviously), at the same time I get a message that Media has been closed (crash), the a message that System UI has been closed, then Media again an off it goes: Bootscreen forever again.
If I can provide further Information please let me know. I haven't tried a larger OpenGApp-Package, does that might help?
Edit: This problem occurs just with the build 20160229, the newer build 20160301 works, but there ril is not working again (so probably you know about the problem already).
I am using the TWRP klimtwifi recovery. Is it possible that this prevents me from installing the latest unofficial build? I get an error in TWRP telling me my tablet is klimtwifi although I know that it is a SM-T705.
And can anyone point me to a working klimtwifi TWRP recovery?
EDIT: found it under the link in post #16.
And I got now the 0307 one installed but IMEI is still unknown.
03/01 works but i still have no sim card
03/07 and 03/08 hang at the samsung screen, on a clean flash and ive tried upgrading from 03/01
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1(LP), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it!
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Unofficial build of CyanogenMod 12.1 (Android 5.1.1) for the M2 Note
Working:
Everything :victory:
Hardware acceleration
SELinux enforced
RIL for SMS/Calls/Internet
GPS
WiFi
Vibration
Audio
Bluetooth / A2DP
MTP and Mass Storage mode
External SD
Camera (Videos & Photos)
All Sensors
Tethering
USB Otg
Gestures!
mBack button!
LiveDisplay (natively smooth)
Download:
Build 15 (Stable 3 "Elpun") : Download
/! Make a backup, This build needs a full wipe /!
[security] November Security Bulletin from CM
[usb] Charge Only can be enabled (and usb can be renabled)
[fix] Zram should be working correctly now (reduces longterm slowdowns)
[camera] Recording in stereo should work now (Thanks @goodoane)
[kernel] security feature : now uses CC_STACK_PROTECTOR_STRONG, more info
[signed-build] the build is now using release-keys instead of public "test-keys" meant for debug, improves a bit security and fixes some bugs in Google Apps (ex: Android Wear refusing to work, asking for an "user/signed" or "userdebug/unsigned" rom)
Build 14 (Stable 2 aka "Ololo") : Download
/! Make a backup, dirty update works but if not, do a clean wipe or don't complain about bugs/crash/FC/whatever /!
[security] Dirty COW fixed (CVE-2016-5195)
[battery] small improvements, battery stats should be more accurate
[stability] Clock wakelocks should be fixed
[improvement] built as user instead of userdebug (rom size is a bit smaller, less logs)
[SafetyNet] is properly "suported", banking apps and pokemon Go perfectly works without installing anything else (no more systemless root, xposed or w/e to make it work )
[kernel] general updates (3.10.104)
Build 13 (Stable 1 aka "Olala") : Download
/! Make a backup and do a clean wipe or don't complain about bugs/crash/FC/whatever /!
[LiveDisplay] is now natively working (perfectly smooooooth)
[kernel] general updates, security updates, cleanup, Live Display Implementation
[stability] CM updates
[usb] Charging mode only should work correctly when plugged in usb.
[decoder] AwesomePlayer is now enabled by default instead of NuPlayer (known to cause Google Photos crash, etc.)
[gestures] CMActions is now correctly using Russians strings, Spanish translation added.
[misc] root should be allowed from Dev Options now, anyway if not, flash SuperSU
Build 12 (Release Candidate 2) : Download
/! Make a backup and wipe /system before you flash this RC to be sure you got rid off the ANT+ files /!
This RC2 will probably be renamed "stable 1" if no major problem arise.
[kernel] general updates, cleanup , disabled KSM & UKSM for battery performance
[removed] ANT+ was only partially working and caused battery drain (it seems)
[battery] disabled both ANT (see above) and a few unneeded kernel features that might have caused a bit of draining issues, this should be better now ! :good:
[stability] overall cleanup (overlays, values, etc..)
[gestures] CMActions was cleaned and a few bugs were fixed, the gestures are now enabled/disabled by a switch but remains customisable when you press on them :good:
[misc] adb is not root by default anymore (this might help those who play PoGo) use the dev settings to change that
Build 11 (Release Candidate 1) : Download
(I told you I wouldn't release a beta next time)
changelog :
[bugfix] wifi hotspot is working (both in secured and unsecured AP mode)
[bugfix] fix the back button not being active at first touch when home was pressed to wake the device (elexogic)
[bugfix] back button vibration renabled
[improvement] Gestures are fully customisable now, choose what app/action is triggered (thanks elexogic again)
[kernel] general updates, config_aio disabled for security
[battery] IOscheduler reverted to "deadline" for better battery life
[stability] wifi, mobile, bluetooth, gps stability improved (blobs update to 5.1.10G)
Build 10 (latest beta before stable ) :
Download
(changelog : trully fixed back button for all M2 Note variants)
Issues
Data on second sim in a dual-sim configuration. (hardware limitation)
If you find a bug please check if there's no issue already mentioning it and create one with details and logs here : Bug reports @ Github issues
BUT FIRST :
Do a clean install first, wipe everything.
Make sure you don't use modifications (flash clean, try again)
Check the closed issues
Check google first, there might already be solutions
Explain and give details, add logs as much as possible
How to install:
It's usually a good idea to download the newest build version. Just install it via recovery. I tested it on TWRP but it should also work on other recoveries.
You will also need gapps if you want to use Google services. stock OpenGApps - use the arm64 versions.
How to install TWRP - I don't support unlocking bootloader, installing TWRP or the ROM, you should know what you do first or start learning.
Sources:
Device Tree: https://github.com/Moyster/android_device_meizu_m2note
Kernel: https://github.com/Moyster/android_kernel_m2note
Thanks to:
@BlueFlame4
@Elexogic for his fixes on back button and gestures
@scafroglia93 for his kernel updates
Meizu & Mediatek for releasing their sources!
Appendix:
If you want to mirror the files or port the ROM to another device, I encourage you to do so! Only please respect my work and give proper credits. Thank you!
XDA:DevDB Information
[STABLE] CM-12.1 for Meizu M2 Note [5.1.1], ROM for the Meizu MX
Contributors
Moyster, BlueFlame4, Elexogic, Everyone I forgot, those who translated the gestures modules (Alex Lartsev (RU), LBA97 (ES))
Source Code: http://github.com/Moyster
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: No Longer Updated
Current Stable Version: Stable two
Stable Release Date: 2016-11-09
Created 2016-09-10
Last Updated 2017-02-05
Great job was visiting your github daily downloading now
Sent from my M2 Note using XDA-Developers mobile app
Thanks a lot for hard work!
You could add a link for the recovery twrp?
Inviato dal mio m2 note utilizzando Tapatalk
ro11er said:
Great job was visiting your github daily downloading now
Sent from my M2 Note using XDA-Developers mobile app
Click to expand...
Click to collapse
Sent from my M2 Note using XDA-Developers mobile app
ro11er said:
Sent from my M2 Note using XDA-Developers mobile app
Click to expand...
Click to collapse
done
Moyster said:
done
Click to expand...
Click to collapse
Moyster nega quota exceeded any chance of uploading somewhere else?
Sent from my M2 Note using XDA-Developers mobile app
Good job ...thanks you
COOL JOB!!!!!!
THX
Please port MIUI rom the M2 Note........
Soory my bad English!!
Grat!
The new cm 12.1 rom!!!
Thanks for hard work.
:< My SIM1 tray was broken, I won't be able to use this rom.
Anyway, thanks for your hard work.
ro11er said:
Moyster nega quota exceeded any chance of uploading somewhere else?
Sent from my M2 Note using XDA-Developers mobile app
Click to expand...
Click to collapse
I don't really have time to post it anywhere else now, if someone is kind enough to do it, you're welcomed
I'll try to find a way and have them online, maybe OTA too, if anyone is kind enough to host all that ^^
qamu74 said:
COOL JOB!!!!!!
THX
Please port MIUI rom the M2 Note........
Soory my bad English!!
Grat!
The new cm 12.1 rom!!!
Click to expand...
Click to collapse
I don't port roms, sorry.
Next step :
1. fixing bluetooth
2. stable CM-12.1 release
3. CM13
Moyster said:
I don't really have time to post it anywhere else now, if someone is kind enough to do it, you're welcomed
I'll try to find a way and have them online, maybe OTA too, if anyone is kind enough to host all that ^^
I don't port roms, sorry.
Next step :
1. fixing bluetooth
2. stable CM-12.1 release
3. CM13
Click to expand...
Click to collapse
OH cm13 Very COOL!
Good Job Bro.!!!!
fantasticlord said:
:< My SIM1 tray was broken, I won't be able to use this rom.
Anyway, thanks for your hard work.
Click to expand...
Click to collapse
Good to know, I didn't try both slots but it will be fixed that's why it's a beta and reviews are welcome, I can't test everything alone
Nice!
Moyster sim not detected in sim2. Unfortunately on my way out and need phone when back will get catlog.
Sent from my M2 Note using XDA-Developers mobile app
My sim isn't recognized and the m-back button is off. Will you fix this bugs?
Enviado desde mi m2 note mediante Tapatalk
ro11er said:
Moyster sim not detected in sim2. Unfortunately on my way out and need phone when back will get catlog.
Sent from my M2 Note using XDA-Developers mobile app
Click to expand...
Click to collapse
Hello, I just fixed the second simcard I'll upload a clean build during the night so :
easy fix : wait tomorrow, flash beta 2
"I'm not gonna wait" fix : flash the rom, edit /system/build.prop
and delete the line :
(line ~148)
"persist.radio.multisim.config=dsdsro.mediatek.platform=MT6735"
Edit :
m-back button is off.
Click to expand...
Click to collapse
touch doesn't act for now, simple press is home, long press is "app drawer", It's not off, only back doesn't work, eventually will be fixed
Moyster said:
touch doesn't act for now, simple press is home, long press is "app drawer", It's not off, only back doesn't work, eventually will be fixed
Click to expand...
Click to collapse
Please try to repair the touch, it is a very useful feature!
Thanks a lot for your work!
Inviato dal mio m2 note utilizzando Tapatalk
Moyster said:
Hello, I just fixed the second simcard I'll upload a clean build during the night so :
easy fix : wait tomorrow, flash beta 2
"I'm not gonna wait" fix : flash the rom, edit /system/build.prop
and delete the line :
(line ~148)
"persist.radio.multisim.config=dsdsro.mediatek.platform=MT6735"
Edit :
touch doesn't act for now, simple press is home, long press is "app drawer", It's not off, only back doesn't work, eventually will be fixed
Click to expand...
Click to collapse
Are you gonna fix the back function for tomorrow's update?
Enviado desde mi m2 note mediante Tapatalk
Great job...
The ROM work fine... My second Sim is recognized but only works on "edge" or GSM and the internet connection speed is too slow..
Code:
/*
* Your warranty is now void.
*
* I will not accept responsibility for any adverse effects to your device,
* including, but not limited to: bricking, dead SD card, bootloops etc.
*
* You mod your device at your own risk.
*/
INTRODUCTION
I picked up the work that @Schischu and @malosasha have done and plan on improving it with the work i have done on the lineage base.
For now i will only be building for chagallltetmo but this build can be flashed on chagalllte (T805) you will just not have working data/calling/texting due to changes i did to support the T-Mobile variant.
Maybe in the future i will build it for more. If anyone would like to build the other variants i am open to it and it can share this op if desired.
DOWNLOAD
aosp-chagallltetmo.deadman.20170308.235721.zip
OLDER DOWNLOADs
aosp-chagallltetmo.deadman.20170304.153956.zip
GAPPS
Use OpenGapps
OTA - UPGRADES
They are not supported you will need to manually flash updates
PREREQUISITES
TWRP 3.0.0 or higher. I always use @ashyx newest builds (TWRP builds by @ashyx)
You must be on a lollipop bootloader this can be done by either flashing 5.0.2 stock rom or by flashing this zip in odin https://www.androidfilehost.com/?fid=4996500813288308788 (This zip is for SM-T807T Only!!)
Don't skip this step! If the incorrect bootloader is used your device WILL NOT BOOT!
INSTALLATION INSTRUCTIONS
First time flashing the rom on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash AOSP
Install the Google Apps addon package (Optional)
Reboot
CURRENT CHANGELOG
3/08/2017
Removed a ton of under the hood hacks and fixed them properly (Shim blobs instead of editing the source to support them, Add mmap support, Fix the wifi state machine instead of disabling ip reachability, etc)
Removed a bunch of proprietary blobs that were not needed (Builds are now 11mb's smaller)
Updated the drm blobs to a newer version from bullhead
Updated the GPS and Bluetooth blobs from stock chagallltetmo
Fix Bluetooth name
GPS locks faster
OLDER CHANGELOGS
3/4/2017 Build
Initial ril support chagallltetmo (Defaults to 3g on first boot)
Added memtrack support from the newer 5422 based bsp that we use on lineage
Fixed mtp host fc on first boot
Fixed video recording
Updated prebuilt omx blobs
Made the QS menu bigger to be inline with lineage
ISSUES
Ril is still very unstable and is not working for everyone
HD Video stutters
More that i may have missed
SOURCE CODE
Manifest
Kernel
SCREENSHOTS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
XDA:DevDB Information
[ROM][AOSP 7.0] [SM-T807T] (Chagallltetmo), ROM for the Samsung Galaxy Tab S
Contributors
deadman96385
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
Version Information
Status: Beta
Created 2017-03-05
Last Updated 2017-03-04
Reserved
Reserved
I like your passion, digging up this rom.
deadman96385 said:
PREREQUISITES
Applied bootloader update, e.g. by flashing this zip in odin https://www.androidfilehost.com/?fid=4996500813288308788
Don't skip this step! If the incorrect bootloader is used your device WILL NOT BOOT!
Click to expand...
Click to collapse
Questions:
-if the T807T bootloader is a requirement, how would it work on T805? I imagine possibility for catastrophe if the wrong bootloader is flashed amiright?
-Could you comment on t805w bootoader w.r.t this requiement?
weeekwo said:
I like your passion, digging up this rom.
Questions:
-if the T807T bootloader is a requirement, how would it work on T805? I imagine possibility for catastrophe if the wrong bootloader is flashed amiright?
-Could you comment on t805w bootoader w.r.t this requiement?
Click to expand...
Click to collapse
Kitkat bootloaders do not work anymore so you must upgrade to a lollipop based one. If your on a lollipop one no matter what model you are fine. T805W specifically you can flash this fine you just will not get any form of data/calling/texting same as T805. I put it in the OP because not everyone updates the bootloader.
I think I love you
EDIT: Ok just flashed this. Installed smoothly.
Your OP was correct that it defaulted to 3G, but when I change it to LTE it shows that I have bars but no LTE and connecting to the web says I am not online. Is LTE not working at all?
RelayTech said:
I think I love you
EDIT: Ok just flashed this. Installed smoothly.
Your OP was correct that it defaulted to 3G, but when I change it to LTE it shows that I have bars but no LTE and connecting to the web says I am not online. Is LTE not working at all?
Click to expand...
Click to collapse
huh mine take a bit after switch to LTE to actually display but it does after a little bit. But i am still working to make ril more stable currently the telephony code is not reading the modem properly so its all over the place signal wise.
i'm following this.. how are you guys doing to so far on this rom? ill flash once all is sorted out.. are you guys getting 4g? all else working? what about a phone dial pad? how is it on t-mobile?
New build in OP
Changelog:
Removed a ton of under the hood hacks and fixed them properly (Shim blobs instead of editing the source to support them, Add mmap support, Fix the wifi state machine instead of disabling ip reachability, etc)
Removed a bunch of proprietary blobs that were not needed (Builds are now 11mb's smaller)
Updated the drm blobs to a newer version from bullhead
Updated the GPS and Bluetooth blobs from stock chagallltetmo
Fix Bluetooth name
GPS locks faster
Current known bugs:
Ril is still very unstable and is not working for everyone
HD video stutters
Thanks for the update. You were right, it took a while for it to switch over to LTE but it did, it doesnt show bars but it shows LTE. A speed test shows it works but not at full speeds. Will stick with HSPA for now as its faster than the LTE im getting.
RelayTech said:
Thanks for the update. You were right, it took a while for it to switch over to LTE but it did, it doesnt show bars but it shows LTE. A speed test shows it works but not at full speeds. Will stick with HSPA for now as its faster than the LTE im getting.
Click to expand...
Click to collapse
Thanks for getting back to me yeah its a bit derpy still just glad it works for now.
An issue I found that wasn't listed has to do with the fingerprint scanner. When setting up a fingerprint for unlock, it is detected and works, but once stored and trying to use the scanner on the unlock screen, nothing. Also trying to remove stored fingerprints crashes the settings app.
Wireless Disconnect
Wireless seems to drop after being connected for a bit and will not let you search for an ssid until you turn it off and then back on again. Battery life is insane and everything else is buttery smooth! You brought life back to this tablet, it sucks we can't use any of the well known roms..or can we?
Thank you so much Deadman for the work on this. Are you planning on mantaining this or do you want us to move to another ROM as well? I don't particularly care for the Cell features as I do a functional stable rom .
Just installed, rom works great... some intermittent in and out on T-mobile network. I have tried everything from Nougat on Lineage to AOKP and neither of them boot.
Iron Man boots but I cant get LTE.
Looking forward to future updates and development on this ROM.
Thanks for Hard Work.
deadman96385 said:
Kitkat bootloaders do not work anymore so you must upgrade to a lollipop based one. If your on a lollipop one no matter what model you are fine. T805W specifically you can flash this fine you just will not get any form of data/calling/texting same as T805. I put it in the OP because not everyone updates the bootloader.
Click to expand...
Click to collapse
does this mean I can use this for the sprint t807p variant? Im somewhat confused by what you meant any model, you are fine.. lol.. thanks ..
@deadman96385 I had this rom running for a few days and it was spectacular. Only major issue was the data services all over the place., which fro me is a deal breaker. If theres anything I can do to help PLEASE let me know. whether its testing / building / donating.
cheers
NJ_RAMS_FAN said:
does this mean I can use this for the sprint t807p variant? Im somewhat confused by what you meant any model, you are fine.. lol.. thanks ..
Click to expand...
Click to collapse
Not the Sprint variant that's a snapdragon device
mxvris said:
@deadman96385 I had this rom running for a few days and it was spectacular. Only major issue was the data services all over the place., which fro me is a deal breaker. If theres anything I can do to help PLEASE let me know. whether its testing / building / donating.
cheers
Click to expand...
Click to collapse
I halted work on this variant for now because my SIM card slot broke and I don't have the funds right now to buy the part/tools to fix it. But in a month or two I should be able to.
[/PHP]
deadman96385 said:
Not the Sprint variant that's a snapdragon device
I halted work on this variant for now because my SIM card slot broke and I don't have the funds right now to buy the part/tools to fix it. But in a month or two I should be able to.
Click to expand...
Click to collapse
Figured. Lol. Somebody gave it to me. I was thinking of looking for a sm-t800 broken just for the board.
I installed the rom, Data works fine but i cannot make calls or send sms, it says service disabled. Anyone knows how to fix it?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
(No, the ROM has nothing to do with trees, it's just OneUI 3)
Welcome to Android 11, and OneUI 3 from the Galaxy S20!
This ROM is a direct port of OneUI 3 from the Samsung Galaxy S20 to (parts of) the Exynos 7885/7904 family.
It can be used on Treble and Non-Treble phones. If you use it with treble enabled, it will install a vendor compatible with Android 11 GSIs too!
Features
-Based on G980FXXS6DUBA
-AROMA installable modules, and CSC selector
-DeX On PC Works!
-Debloated base
-OneUI 3.1
-TreeUI Kernel with 4.4.185
-Includes Android 11 vendor (Full vndk, works with vndklite too)
-Support for A530F, A530W, A530N, A730F, A750*, M205*, M305*
What doesn't work:
[Common]
-Samsung Camera (3rd party apps should work)
-Face unlock
-Torch intensity control
-VoLTE (experimental option available, some Indians had luck with that, and DBT CSC
What works:
-Everything else
Installation:
Read this as you need to set some settings to fix the resolution and DPI
-(Optional, A8 only) Treble your phone using the treble guide
-If you haven't yet, install a custom recovery and decrypt data
-Flash zip in custom recovery
-Wipe data
-Reboot
-First boot will be in wrong resolution and DPI
-After setting up the device, go into display settings and set the resolution to 1440p or 720p
-Set it back to 1080p
-Set display zoom to some other level then back.
Downloads/Changelog:
0.9.5 BETA (ROM+VENDOR) (note that a beta test version of this was leaked with many of the problems not fixed. please update if you use that leaked version)
- Headphone jack fully fixed
- Added M20 and M30 support
- Probably fixed AROMA freezes
- Added Photo and Video editor
- Fixed S Notes
- Fixed WiFi QR codes
- Removed Super Fast Charging, only left Fast charging in place, since we don't have Super Fast Charging
- Added experimental VoLTE (read "What doesn't work")
- Added Dual Messenger
- Fixed booting on non-treble Canadian and Korean A8
0.9.4 BETA (ROM+VENDOR)
- First public release
Source Code:
GitHub
Screenshots:
Spoiler: Screenshots
View attachment 5259589View attachment 5259591View attachment 5259593View attachment 5259595View attachment 5259597View attachment 5259599View attachment 5259603View attachment 5259601
Credits:
-Me
-@prashantp01, and @ananjaser1211 for lots of fixes, and help! Go support them!
-@arminhere, @Hovo01, @Voytec83, and @VenusEleven for testing!
-@Akhil99 for testing on the Galaxy M30, and providing some fixes for it.
Donate:
BTC: 19748ZuTu5f7CShVQMTnDNNe5Q4WryxaDZ
PayPal: http://paypal.me/VDavid003
Will use it to buy stuff that needs fixing
If you link to my ROM, please link to the XDA thread, not directly to the file!
Awesome
@VDavid003 Great job bro! It is a pleasure working with you to bring OneUI 3.1 Port to M30. Looking forward to work on more future projects with you.
I'm excited to know I can get android 11 on my m30, even though I wanted something lightweight, is the rom rooted? Is there fm radio app? What is the way to download it? When it gets to a point, the download says forbidden, so I have to start all over, it does not continue.
cherished said:
is the rom rooted?
Click to expand...
Click to collapse
Rom is not prerooted but can be rooted with magisk.
cherished said:
Is there fm radio app?
Click to expand...
Click to collapse
Fm radio app is not included by default.
cherished said:
What is the way to download it? When it gets to a point, the download says forbidden, so I have to start all over, it does not continue.
Click to expand...
Click to collapse
The ROM? The GDrive link should work fine.
It would be really helpful if you could upload the rom file on some other website like mediafire or mega. Thank you very much. Google drive says "
Sorry, you can't view or download this file at this time.
Too many users have viewed or downloaded this file recently. Please try accessing the file again later. If the file you are trying to access is particularly large or is shared with many people, it may take up to 24 hours to be able to view or download the file. If you still can't access a file after 24 hours, contact your domain administrator."
Great work dude keep it up!
To fix secondary cameras only by making a custom kernel?
Hi there,
I'm using my m30 with turboA7 port rom.. when I tried to install this I'm not able to do it..so can anyone pls help me
Leandrosgrgr said:
To fix secondary cameras only by making a custom kernel?
Click to expand...
Click to collapse
A custom kernel won't fix secondary cameras. Either some workaround can, or newer camera blobs from Samsung.
I tried this rom on my M30. It works great, it's lightweight bloat free and runs smoothly. I have a 4g sim so I've chosen experimental 4g in setup of Rom installation. Only one bug I found is that I can run 4g/volte internet on my device but when I try to make a call, the network get lost all of a sudden & it shows no service where my Sim card name appears, and after few seconds my signal gets back. It happens whenever I try to make a call so I am unable to call anyone while using this Rom. Any solution would be appreciated. Thanks.
akhil093 said:
I tried this rom on my M30. It works great, it's lightweight bloat free and runs smoothly. I have a 4g sim so I've chosen experimental 4g in setup of Rom installation. Only one bug I found is that I can run 4g/volte internet on my device but when I try to make a call, the network get lost all of a sudden & it shows no service where my Sim card name appears, and after few seconds my signal gets back. It happens whenever I try to make a call so I am unable to call anyone while using this Rom. Any solution would be appreciated. Thanks.
Click to expand...
Click to collapse
How is speaker volume?
I"m going to try on my Galaxy M205F and will soon give the feedback.
Akshayn8055 said:
It would be really helpful if you could upload the rom file on some other website like mediafire or mega. Thank you very much. Google drive says "
Sorry, you can't view or download this file at this time.
Too many users have viewed or downloaded this file recently. Please try accessing the file again later. If the file you are trying to access is particularly large or is shared with many people, it may take up to 24 hours to be able to view or download the file. If you still can't access a file after 24 hours, contact your domain administrator."
Click to expand...
Click to collapse
Just try buddy! I've successfully downloaded it in one click from google drive.
TreeUiPlus A7 A8 0.9.4 BETA.zip
drive.google.com
I've successfully installed this ROM in my Galaxy M205F. VOLTE doesn't work instead for JIO SIM users in India you can use Jio Call App for calling, it works fine but for that your cellular data must be turned on. Other settings work totally fine. If I find any issue furthermore I'll give info.
Thank you so much @VDavid003.
How to use secure folder in this rom?
Does it feature dual speaker mod?
When will 0.9.6 be released?
Hi, I can't connect in mobile network, someone have this problem too, and know how to solve?
(I tried manual selection, reboot, another access point, and other things)
VDavid003 said:
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
(No, the ROM has nothing to do with trees, it's just OneUI 3)
Welcome to Android 11, and OneUI 3 from the Galaxy S20!
This ROM is a direct port of OneUI 3 from the Samsung Galaxy S20 to (parts of) the Exynos 7885/7904 family.
It can be used on Treble and Non-Treble phones. If you use it with treble enabled, it will install a vendor compatible with Android 11 GSIs too!
Features
-Based on G980FXXS6DUBA
-AROMA installable modules, and CSC selector
-DeX On PC Works!
-Debloated base
-OneUI 3.1
-TreeUI Kernel with 4.4.185
-Includes Android 11 vendor (Full vndk, works with vndklite too)
-Support for A530F, A530W, A530N, A730F, A750*, M205*, M305*
What doesn't work:
[Common]
-Samsung Camera (3rd party apps should work)
-Face unlock
-Torch intensity control
-VoLTE (experimental option available, some Indians had luck with that, and DBT CSC
What works:
-Everything else
Installation:
Read this as you need to set some settings to fix the resolution and DPI
-(Optional, A8 only) Treble your phone using the treble guide
-If you haven't yet, install a custom recovery and decrypt data
-Flash zip in custom recovery
-Wipe data
-Reboot
-First boot will be in wrong resolution and DPI
-After setting up the device, go into display settings and set the resolution to 1440p or 720p
-Set it back to 1080p
-Set display zoom to some other level then back.
Downloads/Changelog:
0.9.5 BETA (ROM+VENDOR) (note that a beta test version of this was leaked with many of the problems not fixed. please update if you use that leaked version)
- Headphone jack fully fixed
- Added M20 and M30 support
- Probably fixed AROMA freezes
- Added Photo and Video editor
- Fixed S Notes
- Fixed WiFi QR codes
- Removed Super Fast Charging, only left Fast charging in place, since we don't have Super Fast Charging
- Added experimental VoLTE (read "What doesn't work")
- Added Dual Messenger
- Fixed booting on non-treble Canadian and Korean A8
0.9.4 BETA (ROM+VENDOR)
- First public release
Source Code:
GitHub
Screenshots:
Spoiler: Screenshots
View attachment 5259589View attachment 5259591View attachment 5259593View attachment 5259595View attachment 5259597View attachment 5259599View attachment 5259603View attachment 5259601
Credits:
-Me
-@prashantp01, and @ananjaser1211 for lots of fixes, and help! Go support them!
-@arminhere, @Hovo01, @Voytec83, and @VenusEleven for testing!
-@Akhil99 for testing on the Galaxy M30, and providing some fixes for it.
Donate:
BTC: 19748ZuTu5f7CShVQMTnDNNe5Q4WryxaDZ
PayPal: http://paypal.me/VDavid003
Will use it to buy stuff that needs fixing
If you link to my ROM, please link to the XDA thread, not directly to the file!
Click to expand...
Click to collapse
Forecast for the camera concert?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
* Your warranty is now void.
*
/*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Introduction
LineageOS is a free, community built, aftermarket firmware distribution of Android 12 (S), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Bugs
What's working:
Boot
RIL
Camera
Fingerprint Sensor
WiFi
Bluetooth
Audio
Video Playback
NFC
Sensors
Touch
Flash
Moto gestures
Network monitor
Secure boot
What's not working:
Encryption
SELinux
Vendor mismatch (warning on each boot) removed, not fixedr
You tell me.
What's untested:
GNSS GPS
Audio via USB C
Hotspot (2.4Ghz / 5Ghz)
Moto Mods (likely broken)
SD card
External storage
VoLTE
Installation instructions
Upgrade to Stock Oreo Firmware if not done already!
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions and FORMAT DATA from TWRP of your device (required when coming from stock!).
Flash ROM.
Optional: Install the Google Apps addon package.
Optional: Install Magisk for Root.
Downloads
Gapps : MindTheGapps
Rom : Download
Sources
device tree: github
kernel tree: github
vendor tree: github
local manifest: github
Big Thanks
LineageOS Team.
Tarkzim and raul-16 for their reference trees and xda template.
Adi20_01, TheVancedGamer, Astridxx and nift4 on tg for helping me out.
8890q team for their amazing network monitor patch
@qwek and @blinkerss for using and testing the rom
Wanna support me?
Join the support chat and share your experience and tips!
Code:
Changelog:
18th February:
February security patch
add custom dns options
add options to set renderer
double tap to sleep
drop misc debugging
27th January:
January security patch
Add signature spoofing
Fix fingerprint
Bork encryption
Fix misc kernel vulnerabilities
18th December:
CLEAN FLASH MANDATORY
NEW RECOVERY FOR DECRYPTION NEEDED
December security patch
fix encryption
uprev keymaster
exclude audiofx
update gps configs
04th December:
enable secure boot
disable rounded corners
fix buggy lockscreen
12th October:
October security patch
remove warning on each bootup
fix network monitor
add updater strings
some sepolicy changes (not enforcing, but a step in the right direction)
21st September:
initial userdebug build
enable zram
update media codecs
aggressive write caching
initial release
this is my logcat sir. just wanna report again. it getting hot randomly when i doesnt use it.
Thx for reporting your issue, but according to your logs it is chrome/chromium that keeps crashing...
Nvm, there is a lot going on, which I dont understand...
*but gapps are in there a lot.
@SirRGB i use mindthegapps 🫠🫠 i disable many builtin apps. i change jelly browser to chrome, aosp camera i change with google camera from store. nvm? do you mean my network? if yes, my network provider going crazy yesterday, i lose many many times lte network. as you mention that chrome going crash, i never get a notification my chrome force close or anything. but right, i fell little bit hotter after installed chrome. and last night griffin get hot when charging reach 80%. its weird. this is all happening after i dirty flashed 2nd build. well, i'll change the gapps with clean flash and i'll report again. thanks for helping me.
iam so sorry dissapoint you. but after i posted last comment. my network totally gone. really gone. even i searching it manualy. no one network showing up. nothing. so i decide to flash to stockrom via fastboot to see what happen with my. and surprise my network come after done.
update:
i can confirm that network problem on my griffin is not from LOS 19.1. i've tried on many custom rom such /e/, LOS 18.1, 17.1. When my network is gone. It cannot searching anymore. but, reboot system can solve the problem. IDK why, but i never faced this problem on custom rom without vendor e.g OMNIROM 9 or stockrom.
Ok, good to know. I didnt actively use it and just tested the basic functions...
I really hope you had a backup of efs/persist/modem since that could be your issue...
qwek said:
update:
i can confirm that network problem on my griffin is not from LOS 19.1. i've tried on many custom rom such /e/, LOS 18.1, 17.1. When my network is gone. It cannot searching anymore. but, reboot system can solve the problem. IDK why, but i never faced this problem on custom rom without vendor e.g OMNIROM 9 or stockrom.
Click to expand...
Click to collapse
my other moto z (bootloader locked with stock 8.0 rom) also have the similiar same problem like you: random and sudden signal missing, and restart to fix it, IDK but i think its some hardware issue for my moto z, because with my daily moto z (bootloader unlock, carbon rom 10) never have the missing signal problem, and i have try lots of custom rom
blinkerss said:
my other moto z (bootloader locked with stock 8.0 rom) also have the similiar same problem like you: random and sudden signal missing, and restart to fix it, IDK but i think its some hardware issue for my moto z, because with my daily moto z (bootloader unlock, carbon rom 10) never have the missing signal problem, and i have try lots of custom rom
Click to expand...
Click to collapse
what is your sim card bro? i use crazy axiata, when every 2.00am network always gone until 30 minutes. i think its radio band, but when i try to check, its only automatic and US.
SirRGB said:
Ok, good to know. I didnt actively use it and just tested the basic functions...
I really hope you had a backup of efs/persist/modem since that could be your issue...
Click to expand...
Click to collapse
i think so. first i flash fw with retail then flash customrom, then i change fw with EMEA APAC region and flash custom rom again, issue still there, even i change other custom rom.
qwek said:
what is your sim card bro? i use crazy axiata, when every 2.00am network always gone until 30 minutes. i think its radio band, but when i try to check, its only automatic and US.
Click to expand...
Click to collapse
I'm using telkomsel, also if I'm remember correctly, re-insert the sim card will fix this sudden random signal missing, the only thing that i havent test: using the 2nd simcard slot
update:
using more than one week. i change chrome with bromite and use nikgapps. idk but my network problem has gone. but im stick with 4g only now. no phone calls no problem i never use it. i know eta is not allowed. but i hope for the update. latest build deserve official status.
3.18 and below cant get official lineage 19/20/..., so that wont ever happen unless someone backports bpf.
I still dont know selinux and dont know if it is worth it to investigate...
Havent changed anything source wise, so rebuilding wouldnt fix anything. Might do another build with the new security patch once it is released.
Thx for reporting and using it
Feel free to report any issues and share logs.
SirRGB said:
3.18 and below cant get official lineage 19/20/..., so that wont ever happen unless someone backports bpf.
I still dont know selinux and dont know if it is worth it to investigate...
Havent changed anything source wise, so rebuilding wouldnt fix anything. Might do another build with the new security patch once it is released.
Thx for reporting and using it
Feel free to report any issues and share logs.
Click to expand...
Click to collapse
what about mokee? i think they are accept. i saw griffin still got update but no maintainer. honestly, i dont have any skill about coding or anything. just appreciate your amazing work. you very kind, still care to our device.
I think they mostly buildbot .i.e. they take the official lineage trees and build based on that. However I can go for arrow os community. In that case I dont have to worry about sepolicy for now and we all can enjoy monthly ota updates...
found a patch, that makes the network monitor work, will be included in the next build...
SirRGB said:
found a patch, that makes the network monitor work, will be included in the next build...
Click to expand...
Click to collapse
glad to know that. i saw many new commits. i think you prepare something bigger. alright, just waiting. and testing. iam ready for it.
qwek said:
glad to know that. i saw many new commits. i think you prepare something bigger. alright, just waiting. and testing. iam ready for it.
Click to expand...
Click to collapse
If you meant my device tree that was probably just my rebase i.e. I cleaned up the commit history a little.