Database Users

[Discontinued][ROM][7.0] HyperStock v2 OxygenOS 4.0.3 | Dash | Fast | Lite | Stable

Hi,
I don't update is rom anymore. I don't have much time and sell my 1+3. But enjoy all other rom. I recommend Experience ROM or AURORA ROM
Hello and welcome to my Thread,
I want to share with you my daily driver. I'm not a Brain my some other gus here .
HyperStock is only a factory image based Rom. I cook it with SuperR's Kitchen and I only debloated it, add bootanimation and "steal" ah I mean add some Mods. Even the bootanimation is ripped.
Features:
lastest OnePlus Image (OxygenOS 4.0.2)
Odex
SuperSU v2.79SR3
Busybox 1.25.1
no force encryption
removed dm-verity checks
init.d support
su.d support
insecure boot image
native MultiWindow support
Marvel VS DC bootanimation
AdAway v3.2
HTC Gallery
HTC Music Player
substratum legacy support
build.prop Tweaks
zipalign APK's
enable Miracast
disabled ADB Icon
uncolored Powersafer Mode
headphone volume warning disabled
aptX support
heavy debloated
#Oneplus 3
system/app/AndroidPay*
system/app/AntHalService*
system/app/BookmarkProvider*
system/app/BluetoothMidiService*
system/app/BTtestmode*
system/app/btmultisim*
system/app/Chrome*
system/app/CloudPrint2*
system/app/DMAgent*
system/app/Drive*
system/app/DivesIconPack*
system/app/Duo*
system/app/EngineeringMode*
system/app/EngSpecialTest*
system/app/FaceLock*
system/app/GoogleHindiIME*
system/app/GoogleJapaneseInput*
system/app/GooglePinyinIME*
system/app/GoogleVrCore*
system/app/Hangouts*
system/app/KoreanIME*
system/app/Maps*
system/app/Music2*
system/app/NFCTestMode*
system/app/PartnerBookmarksProvider*
system/app/Photos*
system/app/PlayGames*
system/app/PrintSpooler*
system/app/OemAutoTestServer*
system/app/OEMLogKit*
system/app/OPBugReport_Complete*
system/app/OpenWnn*
system/app/Stk*
system/app/SensorTestTool*
system/app/SimSettings*
system/app/RifonIconPack*
system/app/SwiftKey*
system/app/SwiftKeyFactorySettings*
system/app/WifiRfTestApk*
system/app/talkback*
system/app/Tycho*
system/app/Videos*
system/app/Wallet*
system/app/YadaYada*
system/app/YouTube*
system/priv-app/OnePlusGallery*
system/priv-app/softsim
system/reserve/OPForum*
system/reserve/OPMusic*
system/reserve/Soundrecorder*
Click to expand...
Click to collapse
Download:
-> OOS 4.0.3 Firmware + Modem (flashable)
-> HyperStock v2 OOS4.0.3
Installation
From OOS:
Download both zips
Copy the rom.zip and firmware.zip on you 1+3
Boot into TWRP
Flash the rom.zip and than the firmware.zp
Reboot
From CM Based:
- Download TWRP and flash it with Flashify or ADB (fastboot flash recovery TWRP.img)
- Download the original Open Beta 9 ZIP (here) and HyperStock ZIP
- Boot into TWRP & do a full wipe
- Flash the official OB9 and reboot into recovery
- Wipe and flash HyperStock
if you like the ROM rate it and hit thanks
if you like my work buy me a kebap or roll me a joint
Special Thanks:
- Google
- XDA
- OnePlus
- SupeR
- Chainfire
- osm0sis
- Mentalmuso
- SyCreed
- NevaX1
- dh.harald
- Christian Tailor (for Marvel VS DC GIF)
- all I forgot
XDA:DevDB Information
HyperStock, ROM for the OnePlus 3
Contributors
*$M3RT$*
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: OOS4
Based On: Factory Image
Version Information
Status: Stable
Created 2016-12-19
Last Updated 2016-12-19
Click to expand...
Click to collapse

WOW, that's Great. Waiting for you to Finish Uploading the ROM!!!

Uploading with 200KB/s >.<
edit: now at 30%

*$M3RT$* said:
Uploading with 200KB/s >.<
Click to expand...
Click to collapse
Uff that's Bad 0_o, that a lot of waiting to do ¯\_(ツ)_/¯

*$M3RT$* said:
Uploading with 200KB/s >.<
edit: now at 30%
Click to expand...
Click to collapse
great, all partitions are ext4 or do you have the same format of the stock beta9?

Thank you, it is promising.
What version of TWRP is required?

if i came from CM14 what should i do ?
---------- Post added at 11:39 AM ---------- Previous post was at 11:38 AM ----------
i hope it doesnot have the CM bugs like Facebook messenger calling ,echo, gps etc..

new_world_2006 said:
i hope it doesnot have the CM bugs like Facebook messenger calling ,echo, gps etc..
Click to expand...
Click to collapse
Hi, it doesn't have any of the CM bugs, as it is not a CM based ROM. I'm using the Open Beta 9 and I didn't find any major bugs, so I'll give this ROM a try, for sure

ak said:
great, all partitions are ext4 or do you have the same format of the stock beta9?
Click to expand...
Click to collapse
Yes, no changes on filesystem.
Minux31 said:
Thank you, it is promising.
What version of TWRP is required?
Click to expand...
Click to collapse
Oh forget it, You have to use this
new_world_2006 said:
if i came from CM14 what should i do ?
---------- Post added at 11:39 AM ---------- Previous post was at 11:38 AM ----------
i hope it doesnot have the CM bugs like Facebook messenger calling ,echo, gps etc..
Click to expand...
Click to collapse
Download the firmware.zip, the rom.zip and twrp.
flash TWRP (flashify or fastboot)
than wipe cache, data system and flash the rom
flash the firmware.zip and reboot
edit: 50%

*$M3RT$* said:
Yes, no changes on filesystem.
Oh forget it, You have to use this
Download the firmware.zip, the rom.zip and twrp.
flash TWRP (flashify or fastboot)
than wipe cache, data system and flash the rom
flash the firmware.zip and reboot
edit: 50%
Click to expand...
Click to collapse
Thanks ,sorry , just to confirm Firmware before or after the Rom ?
and it too slow

So u can't run this rom in f2fs? Since open beta 9 used to work in f2fs just fine

Which file system is this rom using? The new f2fs or the old one?
Gesendet von meinem ONEPLUS A3003 mit Tapatalk

I think the Open Beta 9 use the new filesystem this is the reason why you have to download the TWRP on the first post
edit: 75%

just to confirm Firmware before or after the Rom ?

I'm interested in this ROM, mainly because for the life of me I was not able to install SuperSU on Open Beta 9.
Being on F2FS Data partition, I'll wait for the feedback of someone starting from the same situation.
Thanks @*$M3RT$*!

Dang.. This rom has got some WOW factors in it.. :laugh: Good work btw

This ROM is only for Nexus 6P, OnePlus 3 and tonight maybe Pixel
edit: 95% so start to make a nandroid backup

the coolest thing in this Rom , it looks like a surprise hopefully it works well

Download it, flash it and report

I have a doubt. My data partition is now in ext4. Do I have to change it to F2FS?

[ROM][MIUI NOUGAT] MULTIROM for Mido

https://multirom.me/
••• What is MultiRom? •••
MultiRom is a unique Russian project of which the main focus is quality and stability.
MultiRom Team "Quote"
"Our team is a team of IT professionals. We use modern version control systems, assembly, testing, quality control assembly.
••• Main goal of MultiROM •••
MultiRom team uses their new translation system and patching firmware "B.A.R.S"/Methic.
But Xiaomi.EU team uses simple ways apktool and smali/baksmali.
MultiROM way takes more time to compile but the quality of their work is on high level.
All APKs during the translation are subject to optimization. The greater amount of RAM - as a result of optimization.
-And one example of their great work and high quality is how much free RAM is available compared to other MiUi ROMs.
-They use about 40 patches to make the firmware great. In addition to well-known patches and patch T9 paid to those present:
-Patch Anti-spam, calendar, camera, wedge-master, Email, gallery, a compass, a framework, MiUi key guard, weather, SMS, yellow pages, security, videos, contacts, and so on. In general, patches adapted typical Chinese setting and services to European.
-They do not include third party firmware hacked software. Only Open-Source.
••• MultiROM features •••
-Based on China ROMs.
-Great improvement in RAM management. (2.0GB+ Free RAM available.)
-Supports both Developer and Stable ROMs.
-Weekly updates for Developer ROM after MiUi Official Update.
-Enough Google apps installed.
-No problem with Google apps
-Chinese Bloatwares are removed.
-Firmware is less than 1GB. (not always)
••• Requirements •••
1. Unlocked Bootloader
2. Custom Recovery
••• Important •••
Wipe only data/cache (DO NOT WIPE SYSTEM)
••• Installing Updates •••
Just like installing the ROM/ wipe only data
••• Download links •••
https://multirom.me/index.php?m=app&a=view&id=78&app=roms
Android 6.0 is also available
••• Credits •••
Mi
MultiROM team
XDA
Please hit thanks if I helped you
Just sharing the ROM...

Already on it since past one week. Best miui rom available for our device

if im coming from custom ROM (lineage), do i also avoid wiping system before flashing?

mellovicious said:
if im coming from custom ROM (lineage), do i also avoid wiping system before flashing?
Click to expand...
Click to collapse
Yup don't wipe system...
Sent from my Redmi Note 4 using XDA Labs

mellovicious said:
if im coming from custom ROM (lineage), do i also avoid wiping system before flashing?
Click to expand...
Click to collapse
Yes. Do not wipe system at any cost before flashing this ROM because you'll mess up the device. Always wipe data, DALVIK and cache before flashing and flash the ROM

devilhunter47 said:
Already on it since past one week. Best miui rom available for our device
Click to expand...
Click to collapse
True :angel:

This ROM is a modified MiUi ROM. You'll just need to wipe data, dalvik and cache before flashing the ROM no matter which ROM you had before wiping.

If you have any battery bugs and issues, switch off the phone and charge it because a battery cycle is required after every ROM flash.

Whats the different between MIUI Beta and MIUI Beta Global....?
Sent from my Redmi Note 4 using XDA Labs

do we need a rooted phone in order to install this.

akkay1 said:
do we need a rooted phone in order to install this.
Click to expand...
Click to collapse
We need TWRP Recovery.....
Sent from my Redmi Note 4 using XDA Labs

What is the latest Android 6.0 Rom ?
Edit:
Okay got it. I just looked at the zip names.
DL multirom_HMNote4XGlobal_7.2.9_v6.0.1_b3_aafe50e04a.zip now

JackSparrow17 said:
Whats the different between MIUI Beta and MIUI Beta Global....?
Click to expand...
Click to collapse
Well, global gives you updates through updater. Beta gives updates that should be flashed through recovery.

why i don't need to wipe system?

juned.khatri31 said:
why i don't need to wipe system?
Click to expand...
Click to collapse
Because we love u so much, So we don't want u get lost in Bootloops....:highfive:
Sent from my Redmi Note 4 using XDA Labs

JackSparrow17 said:
Because we love u so much, So we don't want u get lost in Bootloops....:highfive:
Click to expand...
Click to collapse
Nicely done

juned.khatri31 said:
why i don't need to wipe system?
Click to expand...
Click to collapse
Just like JackSparrow17 said, don't do it if you want to get stuck on a bootloop that cannot be fixed without a PC

was there any boot image modifications?

ala_mo said:
was there any boot image modifications?
Click to expand...
Click to collapse
Yes.. SuperSu modified boot image.

Zephoro said:
Yes.. SuperSu modified boot image.
Click to expand...
Click to collapse
no no, like supersu MUST be installed by default?

[ROM] AOSPA 7.3.1 - Paranoid Android

Here is an AOSPA port thanks to team Superluminal. They make solid roms which I used on my Mi4C
This is Team Superluminal AOSPA 7 (android 7 nougat) port for your Xiaomi Mi6
Paranoid Android is a custom ROM aiming to extend the system, working on enhancing the already existing beauty of Android and following the same design philosophies that were set forward by Google for Android Open Source Project.
Based on nougat-mr2 branch.
Proprietary blobs are from miui dev 7.11.6 version.
Click to expand...
Click to collapse
AOSPA ROM Highlights
Passes safetynet check
Overall smooth and “snappy” (and pretty stable too)
No manufacturer pre-installed crappy software, you choose what to install!
Subtratum Support (OMS rom, no need to root for Substratum)
Good battery life
Easy to root (SuperSU included in TS extra, optional)
AOSPA features
Immersive mode
PA browser
Pocket Lock
Accidental Touch
Improvements to Color Engine
Pie Control (with immersive mode)
Swiping Screenshot
Paranoid Shuttle+ music player
Click to expand...
Click to collapse
Known issues/bugs:
NA
Special thanks to:
AOSPA team & everyone who’s been working on AOSPA
thune-xiaobai (device base)
Website: http://www.teamsuperluminal.org/aospa-7-mi6/
Rom: http://www.teamsuperluminal.org:8000/pa_sagit-7.3.1-EOL-20171119.zip I recommend registering on their website for future downloads

Finally new cusrom, gonna test it later

@ekkilm has write a thread about it
https://forum.xda-developers.com/mi-6/how-to/aospa-7-sagit-t3695136

Just flashed... Looks like a beast of a rom!
All the latest comits and touch drivers too. Smooth AF and not overheating the processor
Might just have to donate ?

This rom is just next level polish! Everything just works and the kernel is a beast.. When you type you will feel the difference. Lag free.

adey64 said:
This rom is just next level polish! Everything just works and the kernel is a beast.. When you type you will feel the difference. Lag free.
Click to expand...
Click to collapse
Agree, need more costumization

i hope AOSPA will more add customizion

Hey, i always get twrp openscriptrecevory bootloop with customs roms.. exept xiaomi.eu
Any tips ?? (twrp3.1.1-1)

Pierroxx said:
Hey, i always get twrp openscriptrecevory bootloop with customs roms.. exept xiaomi.eu
Any tips ?? (twrp3.1.1-1)
Click to expand...
Click to collapse
Follow theses steps to install cleanly
1. Enter twrp
2. Wipe data (normal wipe)
3. Install all zips and Roms
4. Don't restart yet
5. Go back to wipe and click format data
6. Reboot.. Enjoy!
?????

adey64 said:
Follow theses steps to install cleanly
1. Enter twrp
2. Wipe data (normal wipe)
3. Install all zips and Roms
4. Don't restart yet
5. Go back to wipe and click format data
6. Reboot.. Enjoy!
Click to expand...
Click to collapse
It doesnt works (

Pierroxx said:
It doesnt works (
Click to expand...
Click to collapse
Did you install firmware 7.11.6 then rom?
Did you format data (not wipe) after install all the zips?

adey64 said:
Did you install firmware 7.11.6 then rom?
Did you format data (not wipe) after install all the zips?
Click to expand...
Click to collapse
So, i did factory reset, flash firmware, then Rom and wipe data then reboot. I don't flash anything else, is that a problem ?
EDIT : I previously was on xiaomi.eu 7.11.16 with magisk enabled

Pierroxx said:
It doesnt works (
Click to expand...
Click to collapse
Then make clean fastboot flash then install TWRP and go by the book
I don't believe it wouldn't work

wojtoo said:
Then make clean fastboot flash then install TWRP and go by the book
I don't believe it wouldn't work
Click to expand...
Click to collapse
hey, by xlean fastboot you mean "fastboot erase cache" and then reflash twrp ?

thanks ,some quetions
1.OTA support?
2.will update to Oreo?
3.It's official?
thanks!

Pierroxx said:
So, i did factory reset, flash firmware, then Rom and wipe data then reboot. I don't flash anything else, is that a problem ?
EDIT : I previously was on xiaomi.eu 7.11.16 with magisk enabled
Click to expand...
Click to collapse
Did you press the format data button and then type yes?

YEAH i did a mistake, i'm sorry guys, i was juste ticking the data option and then wipe it, by only press the data button it worked ! By the way somehting i noticed, TWRP always roll back to 3.1.1-0 when i flash 3.1.1-1 !

How did you install twrp?

yme1997611 said:
1.OTA support?
2.will update to Oreo?
3.It's official?
thanks!
Click to expand...
Click to collapse
1. No.
2. Yes, when the time is right
3.No. And it will not be

This rom sot Vs lineageos? Which one is better? Thanks

Miui.am rom

I am not the developer of this rom.
I am just sharing it for the benefit of other users.
What is MIUI.AM?
Based on MIUI Global and Chinese ROMs, MIUI.AM custom ROM aims to deliver seamless performance with even deeper optimizations that allows you to take full control of your device’s performance.
Fast
Memory optimizations makes our ROM smooth and stable throughout the day.
Customizable
Create your own style with over a thousand themes available at MIUI Theme Store. Download and install Third-party themes at any time.
Battery-friendly
With less bloatware your battery will keep up with your daily activities much longer.
Packed with extra features
MIUI.AM ROMs supports most of main China ROM features on the Global base.
Community-driven
We use Global ROMs as base to our work, but Chinese-only devices also deserves our love! Our translation to over 20+ languages is entirely maintained by the community itself.
You can download from the website below...
Website : http://miui.am/
Once again i am not the developer of this rom,
I just felt that this rom is the best miui based custom rom , so I'm sharing it for other users...

Instructions for flashing:
1.Required - unlocked bootloader with twrp installed.
2.place miui.am rom zip on internal storage.
3.boot into twrp and wipe system, data, cache, dalvik cache.
4. Then flash the rom zip
5.wipe cache and dalvik cache
6.Reboot and enjoy...

Thanks. But it's a little behind with only the April security patches...

did it pre-rooted ? i dont want root

Its not pre rooted
It is based on miui global with added china rom features and also unnecessary Google apps removed..

If anyone want to use gcam without root, ask here?

We will get miui 10 once global beta is released...

Narashimman said:
If anyone want to use gcam without root, ask here?
Click to expand...
Click to collapse
me ~~ how to use it ?? i'm bored with Los and want to revert back to miui

khangcobra said:
me ~~ how to use it ?? i'm bored with Los and want to revert back to miui
Click to expand...
Click to collapse
You need to edit build.prop before flashing rom

Narashimman said:
You need to edit build.prop before flashing rom
Click to expand...
Click to collapse
And enable camera2api?

Steps to enable camera2api without root:
1.Download the miui.am rom zip
2.open the zip using es file explorer or mixplorer
3.navigate to system folder and scroll down , you will see build.prop file
4.open build.prop file
5.scroll down and at last add this line without quotes " persist.camera.HAL3.enabled=1 "
6.Then save the file.
7.now flash the zip and you will get gcam...enjoy

Narashimman said:
You need to edit build.prop before flashing rom
Click to expand...
Click to collapse
can you make a flashable zip with edit the build.prop

If anybody flashed this rom , give your thoughts about this.

khangcobra said:
can you make a flashable zip with edit the build.prop
Click to expand...
Click to collapse
Fine, wait I'll do what i can.
Here internet slow...
I need 4 hrs to upload..

Narashimman said:
Fine, wait I'll do what i can.
Here internet slow...
I need 4 hrs to upload..
Click to expand...
Click to collapse
it's okay ~~ dont rush :> thank you btw

Rom zip with camera2api enabled uploading to gdrive now....

Narashimman said:
Rom zip with camera2api enabled uploading to gdrive now....
Click to expand...
Click to collapse
You can make a zip for build.prop patch only dude .. Don't make a full rom .. Btw thank for your effort ..

Miui.am rom with camera2api enabled..

Narashimman said:
Miui.am rom with camera2api enabled..
https://drive.google.com/file/d/1tPdthjorPJba5KpemdVd2qFC5_Uv3PwO/view?usp=drivesdk
Click to expand...
Click to collapse
Best Rom with great battery life on first impressions,will give full review with screenshots after 2-3 days,thanks for sharing Man!
Sent from my mido using XDA Labs

saransh arya said:
Best Rom with great battery life on first impressions,will give full review with screenshots after 2-3 days,thanks for sharing Man!
Click to expand...
Click to collapse
You flashed the new zip?

OnePlus 5 Treble - Android P Setup

Hi Everyone ,
Not sure if this is too much to ask, but can someone guide me in the direction or send a post with all links from scratch to boot android 9 with Treble support on my oneplus 5 not the 5T.
Thanks,
Anshul

anshul1123 said:
Hi Everyone ,
Not sure if this is too much to ask, but can someone guide me in the direction or send a post with all links from scratch to boot android 9 with Treble support on my oneplus 5 not the 5T.
Thanks,
Anshul
Click to expand...
Click to collapse
Have a look at the guides section https://forum.xda-developers.com/oneplus-5/how-to/android-p-coming-to-5-5t-year-t3787602

anshul1123 said:
Hi Everyone ,
Not sure if this is too much to ask, but can someone guide me in the direction or send a post with all links from scratch to boot android 9 with Treble support on my oneplus 5 not the 5T.
Thanks,
Anshul
Click to expand...
Click to collapse
Just follow my tutorial : HERE
In my tutorial Replace DP5 by the PR1 links HERE

Pho3nX said:
Just follow my tutorial : HERE
In my tutorial Replace DP5 by the PR1 links HERE
Click to expand...
Click to collapse
I am on OB14 (Treble Enabled ROM). Is it still required to flash Mokee rom?

archer797 said:
I am on OB14 (Treble Enabled ROM). Is it still required to flash Mokee rom?
Click to expand...
Click to collapse
yes, still required

Hey guys I'm looking into flashing all this, but can you guys tell me what doesn't work? What are the differences with custom roms?
From what I understand, it's similar to a custom ROM in terms of camera (not fully working), in terms of volte (doesn't work).
I'm willing to test but since it takes a lot of time on my side (need to fully backup etc...), I hope it works fine
Also, the gsi is the lastest version now that official P is out?
Sent from my OnePlus5 using XDA Labs

matssa said:
Hey guys I'm looking into flashing all this, but can you guys tell me what doesn't work? What are the differences with custom roms?
From what I understand, it's similar to a custom ROM in terms of camera (not fully working), in terms of volte (doesn't work).
I'm willing to test but since it takes a lot of time on my side (need to fully backup etc...), I hope it works fine
Also, the gsi is the lastest version now that official P is out?
Click to expand...
Click to collapse
You should ask rom related things in the rom thread https://forum.xda-developers.com/pr...-android-p-developer-preview-t3816659/page116

I am on open beta 15. I saw this video of formatting data, then installing mokee rom, mounting vendor and installing gsi image of dp5 of android p.
Things seemed pretty easy.
I did the exact steps. I am stuck at a point where i can't find vendor option in mount of twrp.
Could someone guide me on what can de done?

cosmic077 said:
I am on open beta 15. I saw this video of formatting data, then installing mokee rom, mounting vendor and installing gsi image of dp5 of android p.
Things seemed pretty easy.
I did the exact steps. I am stuck at a point where i can't find vendor option in mount of twrp.
Could someone guide me on what can de done?
Click to expand...
Click to collapse
Change twrp. I use blu spark twrp and if i remember right it's name had treble

Vika__ said:
Change twrp. I use blu spark twrp and if i remember right it's name had treble
Click to expand...
Click to collapse
Thanks bro. Lets see if that helps. I saw two videos and both used different twrps.
Today i ll try with blu spark treble twrp.
Lets see if it works.

is volte working ?

On PR1 i have one bug. When send screen to my Anycast , find it and when i select it show "connecting" but never connect. When try connect i see bright up and go to lock screen but don´t send image. Anymore have this problem ?. Any idea to solved it ?. I tried diferent kenels, update mokee vendor base , add entries to build.prop refer to this problem, ..... . Thanks.

Chnages on PR1 over DP5
Pho3nX said:
Just follow my tutorial : HERE
In my tutorial Replace DP5 by the PR1 links HERE
Click to expand...
Click to collapse
Can you get some link detailing the Changelog about PR1, I am trying to find the changes in PR1 over DP5.
I treid DP5 on Oneplus 5 and it was still Highly unstable, Video Call feature missing without DUO, Front camera not workng in Ported Google Camera, and many other problems like only LTE no VoLTE support yet. So I am looking for changelog of PR1. ( or you could just mention few changes)

abhinav.kakku said:
Can you get some link detailing the Changelog about PR1, I am trying to find the changes in PR1 over DP5.
I treid DP5 on Oneplus 5 and it was still Highly unstable, Video Call feature missing without DUO, Front camera not workng in Ported Google Camera, and many other problems like only LTE no VoLTE support yet. So I am looking for changelog of PR1. ( or you could just mention few changes)
Click to expand...
Click to collapse
It's not an official OnePlus release, it's a ported rom, you have to expect problems.

djsubterrain said:
It's not an official OnePlus release, it's a ported rom, you have to expect problems.
Click to expand...
Click to collapse
I know that, Official will take much time now. Hope there is improvement over DP5

apparently we can use VOLTE fix from mi4 on our device
can anybody verify that ?

Android P PR1 stuck on Boot Loop to recovery on Oneplus5
I have followed the steps, Wipe device,
install Mokkie ROM latest Nightly build 20180814
Install No Verity Zip
reboot and mount System, Vendor
flash A only image
now flash GSI 1,2,3
flash incall2 and Permisiver zip.
Reboot to system, but stuck in loop to boot to recovery.

abhinav.kakku said:
I have followed the steps, Wipe device,
install Mokkie ROM latest Nightly build 20180814
Install No Verity Zip
reboot and mount System, Vendor
flash A only image
now flash GSI 1,2,3
flash incall2 and Permisiver zip.
Reboot to system, but stuck in loop to boot to recovery.
Click to expand...
Click to collapse
With wipe device you mean formatting data right? After completing mokee set up when you reboot to recovery swipe to factory reset and then flash A image and so on

seniug said:
With wipe device you mean formatting data right? After completing mokee set up when you reboot to recovery swipe to factory reset and then flash A image and so on
Click to expand...
Click to collapse
Agreed your steps need to be:
I have followed the steps, Wipe device, format data
install Mokkie ROM latest Nightly build 20180814
Install No Verity Zip
reboot and mount System, Vendor
flash A only image
now flash GSI 1,2,3
flash incall2 and Permisiver zip.
Reboot to system, but stuck in loop to boot to recovery
---------- Post added at 08:03 AM ---------- Previous post was at 08:00 AM ----------
archer797 said:
I am on OB14 (Treble Enabled ROM). Is it still required to flash Mokee rom?
Click to expand...
Click to collapse
Does anyone know what purpose the Mokee ROM portion of the setup serves on a technical level? Also has anyone noticed that the front camera works on snapchat but not in the google cam port? interesting stuff.